Commit a3e14f3d authored by Gábor Stefanik's avatar Gábor Stefanik Committed by John W. Linville

b43: Update LP-PHY rev2+ baseband init to match the specs

The rev2+ BB init spec has changed behind us, and thus the code is
no longer up to date. Update the code to match the current specs.
Also implement save/restore dig filt state, as required by the
new specification.
Signed-off-by: default avatarGábor Stefanik <netrolller.3d@gmail.com>
Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
parent c65d6fbf
......@@ -195,6 +195,56 @@ static void lpphy_baseband_rev0_1_init(struct b43_wldev *dev)
}
}
static void lpphy_save_dig_flt_state(struct b43_wldev *dev)
{
static const u16 addr[] = {
B43_PHY_OFDM(0xC1),
B43_PHY_OFDM(0xC2),
B43_PHY_OFDM(0xC3),
B43_PHY_OFDM(0xC4),
B43_PHY_OFDM(0xC5),
B43_PHY_OFDM(0xC6),
B43_PHY_OFDM(0xC7),
B43_PHY_OFDM(0xC8),
B43_PHY_OFDM(0xCF),
};
static const u16 coefs[] = {
0xDE5E, 0xE832, 0xE331, 0x4D26,
0x0026, 0x1420, 0x0020, 0xFE08,
0x0008,
};
struct b43_phy_lp *lpphy = dev->phy.lp;
int i;
for (i = 0; i < ARRAY_SIZE(addr); i++) {
lpphy->dig_flt_state[i] = b43_phy_read(dev, addr[i]);
b43_phy_write(dev, addr[i], coefs[i]);
}
}
static void lpphy_restore_dig_flt_state(struct b43_wldev *dev)
{
static const u16 addr[] = {
B43_PHY_OFDM(0xC1),
B43_PHY_OFDM(0xC2),
B43_PHY_OFDM(0xC3),
B43_PHY_OFDM(0xC4),
B43_PHY_OFDM(0xC5),
B43_PHY_OFDM(0xC6),
B43_PHY_OFDM(0xC7),
B43_PHY_OFDM(0xC8),
B43_PHY_OFDM(0xCF),
};
struct b43_phy_lp *lpphy = dev->phy.lp;
int i;
for (i = 0; i < ARRAY_SIZE(addr); i++)
b43_phy_write(dev, addr[i], lpphy->dig_flt_state[i]);
}
static void lpphy_baseband_rev2plus_init(struct b43_wldev *dev)
{
struct ssb_bus *bus = dev->dev->bus;
......@@ -209,7 +259,7 @@ static void lpphy_baseband_rev2plus_init(struct b43_wldev *dev)
b43_phy_write(dev, B43_PHY_OFDM(0xF9), 0);
b43_phy_write(dev, B43_LPPHY_TR_LOOKUP_1, 0);
b43_phy_set(dev, B43_LPPHY_ADC_COMPENSATION_CTL, 0x10);
b43_phy_maskset(dev, B43_LPPHY_OFDMSYNCTHRESH0, 0xFF00, 0x78);
b43_phy_maskset(dev, B43_LPPHY_OFDMSYNCTHRESH0, 0xFF00, 0xB4);
b43_phy_maskset(dev, B43_LPPHY_DCOFFSETTRANSIENT, 0xF8FF, 0x200);
b43_phy_maskset(dev, B43_LPPHY_DCOFFSETTRANSIENT, 0xFF00, 0x7F);
b43_phy_maskset(dev, B43_LPPHY_GAINDIRECTMISMATCH, 0xFF0F, 0x40);
......@@ -217,7 +267,12 @@ static void lpphy_baseband_rev2plus_init(struct b43_wldev *dev)
b43_phy_mask(dev, B43_LPPHY_CRSGAIN_CTL, ~0x4000);
b43_phy_mask(dev, B43_LPPHY_CRSGAIN_CTL, ~0x2000);
b43_phy_set(dev, B43_PHY_OFDM(0x10A), 0x1);
if (bus->boardinfo.rev >= 0x18) {
b43_lptab_write(dev, B43_LPTAB32(17, 65), 0xEC);
b43_phy_maskset(dev, B43_PHY_OFDM(0x10A), 0xFF01, 0x14);
} else {
b43_phy_maskset(dev, B43_PHY_OFDM(0x10A), 0xFF01, 0x10);
}
b43_phy_maskset(dev, B43_PHY_OFDM(0xDF), 0xFF00, 0xF4);
b43_phy_maskset(dev, B43_PHY_OFDM(0xDF), 0x00FF, 0xF100);
b43_phy_write(dev, B43_LPPHY_CLIPTHRESH, 0x48);
......@@ -247,8 +302,10 @@ static void lpphy_baseband_rev2plus_init(struct b43_wldev *dev)
b43_phy_maskset(dev, B43_LPPHY_CLIPCTRTHRESH, 0xFFE0, 0x12);
b43_phy_maskset(dev, B43_LPPHY_GAINMISMATCH, 0x0FFF, 0x9000);
if ((bus->chip_id == 0x4325) && (bus->chip_rev == 1)) {
b43_lptab_write(dev, B43_LPTAB16(0x08, 0x14), 0);
b43_lptab_write(dev, B43_LPTAB16(0x08, 0x12), 0x40);
}
if (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ) {
b43_phy_set(dev, B43_LPPHY_CRSGAIN_CTL, 0x40);
......@@ -268,6 +325,14 @@ static void lpphy_baseband_rev2plus_init(struct b43_wldev *dev)
b43_phy_write(dev, B43_LPPHY_AFE_RSSI_CTL_1,
0x2000 | ((u16)lpphy->rssi_gs << 10) |
((u16)lpphy->rssi_vc << 4) | lpphy->rssi_vf);
if ((bus->chip_id == 0x4325) && (bus->chip_rev == 0)) {
b43_phy_set(dev, B43_LPPHY_AFE_ADC_CTL_0, 0x1C);
b43_phy_maskset(dev, B43_LPPHY_AFE_CTL, 0x00FF, 0x8800);
b43_phy_maskset(dev, B43_LPPHY_AFE_ADC_CTL_1, 0xFC3C, 0x0400);
}
lpphy_save_dig_flt_state(dev);
}
static void lpphy_baseband_init(struct b43_wldev *dev)
......
......@@ -865,6 +865,9 @@ struct b43_phy_lp {
/* Transmit iqlocal best coeffs */
bool tx_iqloc_best_coeffs_valid;
u8 tx_iqloc_best_coeffs[11];
/* Used for "Save/Restore Dig Filt State" */
u16 dig_flt_state[9];
};
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment