Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
  powerpc/pseries: Correct rtas_data_buf locking in dlpar code
  powerpc/85xx: Add P1021 PCI IDs and quirks
  arch/powerpc/sysdev/qe_lib/qe.c: Add of_node_put to avoid memory leak
  arch/powerpc/platforms/83xx/mpc837x_mds.c: Add missing iounmap
  fsl_rio: fix compile errors
  powerpc/85xx: Fix compile issue with p1022_ds due to lmb rename to memblock
  powerpc/85xx: Fix compilation of mpc85xx_mds.c
  powerpc: Don't use kernel stack with translation off
  powerpc/perf_event: Reduce latency of calling perf_event_do_pending
  powerpc/kexec: Adds correct calling convention for kexec purgatory

arch/powerpc/kernel/head_64.S

@@ -575,13 +575,19 @@ __secondary_start:
 	/* Initialize the kernel stack.  Just a repeat for iSeries.	 */
 	LOAD_REG_ADDR(r3, current_set)
 	sldi	r28,r24,3		/* get current_set[cpu#]	 */
-	ldx	r1,r3,r28
-	addi	r1,r1,THREAD_SIZE-STACK_FRAME_OVERHEAD
-	std	r1,PACAKSAVE(r13)
+	ldx	r14,r3,r28
+	addi	r14,r14,THREAD_SIZE-STACK_FRAME_OVERHEAD
+	std	r14,PACAKSAVE(r13)
 
 	/* Do early setup for that CPU (stab, slb, hash table pointer) */
 	bl	.early_setup_secondary
 
+	/*
+	 * setup the new stack pointer, but *don't* use this until
+	 * translation is on.
+	 */
+	mr	r1, r14
+
 	/* Clear backchain so we get nice backtraces */
 	li	r7,0
 	mtlr	r7

arch/powerpc/kernel/misc_32.S

@@ -810,6 +810,9 @@ relocate_new_kernel:
 	isync
 	sync
 
+	mfspr	r3, SPRN_PIR /* current core we are running on */
+	mr	r4, r5 /* load physical address of chunk called */
+
 	/* jump to the entry point, usually the setup routine */
 	mtlr	r5
 	blrl

arch/powerpc/kernel/time.c

@@ -577,20 +577,11 @@ void timer_interrupt(struct pt_regs * regs)
 	 * some CPUs will continuue to take decrementer exceptions */
 	set_dec(DECREMENTER_MAX);
 
-#ifdef CONFIG_PPC32
+#if defined(CONFIG_PPC32) && defined(CONFIG_PMAC)
 	if (atomic_read(&ppc_n_lost_interrupts) != 0)
 		do_IRQ(regs);
 #endif
 
-	now = get_tb_or_rtc();
-	if (now < decrementer->next_tb) {
-		/* not time for this event yet */
-		now = decrementer->next_tb - now;
-		if (now <= DECREMENTER_MAX)
-			set_dec((int)now);
-		trace_timer_interrupt_exit(regs);
-		return;
-	}
 	old_regs = set_irq_regs(regs);
 	irq_enter();
 
@@ -606,8 +597,16 @@ void timer_interrupt(struct pt_regs * regs)
 		get_lppaca()->int_dword.fields.decr_int = 0;
 #endif
 
+	now = get_tb_or_rtc();
+	if (now >= decrementer->next_tb) {
+		decrementer->next_tb = ~(u64)0;
 		if (evt->event_handler)
 			evt->event_handler(evt);
+	} else {
+		now = decrementer->next_tb - now;
+		if (now <= DECREMENTER_MAX)
+			set_dec((int)now);
+	}
 
 #ifdef CONFIG_PPC_ISERIES
 	if (firmware_has_feature(FW_FEATURE_ISERIES) && hvlpevent_is_pending())

arch/powerpc/platforms/83xx/mpc837x_mds.c

@@ -48,8 +48,10 @@ static int mpc837xmds_usb_cfg(void)
 		return -1;
 
 	np = of_find_node_by_name(NULL, "usb");
-	if (!np)
-		return -ENODEV;
+	if (!np) {
+		ret = -ENODEV;
+		goto out;
+	}
 	phy_type = of_get_property(np, "phy_type", NULL);
 	if (phy_type && !strcmp(phy_type, "ulpi")) {
 		clrbits8(bcsr_regs + 12, BCSR12_USB_SER_PIN);
@@ -65,8 +67,9 @@ static int mpc837xmds_usb_cfg(void)
 	}
 
 	of_node_put(np);
+out:
 	iounmap(bcsr_regs);
-	return 0;
+	return ret;
 }
 
 /* ************************************************************************

arch/powerpc/platforms/85xx/mpc85xx_mds.c

@@ -357,6 +357,7 @@ static void __init mpc85xx_mds_setup_arch(void)
 {
 #ifdef CONFIG_PCI
 	struct pci_controller *hose;
+	struct device_node *np;
 #endif
 	dma_addr_t max = 0xffffffff;
 

arch/powerpc/platforms/85xx/p1022_ds.c

@@ -19,7 +19,7 @@
 
 #include <linux/pci.h>
 #include <linux/of_platform.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 
 #include <asm/mpic.h>
 #include <asm/swiotlb.h>
@@ -97,7 +97,7 @@ static void __init p1022_ds_setup_arch(void)
 #endif
 
 #ifdef CONFIG_SWIOTLB
-	if (lmb_end_of_DRAM() > max) {
+	if (memblock_end_of_DRAM() > max) {
 		ppc_swiotlb_enable = 1;
 		set_pci_dma_ops(&swiotlb_dma_ops);
 		ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb;

arch/powerpc/platforms/pseries/dlpar.c

@@ -129,20 +129,35 @@ struct device_node *dlpar_configure_connector(u32 drc_index)
 	struct property *property;
 	struct property *last_property = NULL;
 	struct cc_workarea *ccwa;
+	char *data_buf;
 	int cc_token;
-	int rc;
+	int rc = -1;
 
 	cc_token = rtas_token("ibm,configure-connector");
 	if (cc_token == RTAS_UNKNOWN_SERVICE)
 		return NULL;
 
-	spin_lock(&rtas_data_buf_lock);
-	ccwa = (struct cc_workarea *)&rtas_data_buf[0];
+	data_buf = kzalloc(RTAS_DATA_BUF_SIZE, GFP_KERNEL);
+	if (!data_buf)
+		return NULL;
+
+	ccwa = (struct cc_workarea *)&data_buf[0];
 	ccwa->drc_index = drc_index;
 	ccwa->zero = 0;
 
+	do {
+		/* Since we release the rtas_data_buf lock between configure
+		 * connector calls we want to re-populate the rtas_data_buffer
+		 * with the contents of the previous call.
+		 */
+		spin_lock(&rtas_data_buf_lock);
+
+		memcpy(rtas_data_buf, data_buf, RTAS_DATA_BUF_SIZE);
 		rc = rtas_call(cc_token, 2, 1, NULL, rtas_data_buf, NULL);
-	while (rc) {
+		memcpy(data_buf, rtas_data_buf, RTAS_DATA_BUF_SIZE);
+
+		spin_unlock(&rtas_data_buf_lock);
+
 		switch (rc) {
 		case NEXT_SIBLING:
 			dn = dlpar_parse_cc_node(ccwa);
@@ -197,18 +212,19 @@ struct device_node *dlpar_configure_connector(u32 drc_index)
 			       "returned from configure-connector\n", rc);
 			goto cc_error;
 		}
-
-		rc = rtas_call(cc_token, 2, 1, NULL, rtas_data_buf, NULL);
-	}
-
-	spin_unlock(&rtas_data_buf_lock);
-	return first_dn;
+	} while (rc);
 
 cc_error:
+	kfree(data_buf);
+
+	if (rc) {
 		if (first_dn)
 			dlpar_free_cc_nodes(first_dn);
-	spin_unlock(&rtas_data_buf_lock);
+
 		return NULL;
+	}
+
+	return first_dn;
 }
 
 static struct device_node *derive_parent(const char *path)

arch/powerpc/sysdev/fsl_pci.c

@@ -399,6 +399,8 @@ DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P1013E, quirk_fsl_pcie_header);
 DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P1013, quirk_fsl_pcie_header);
 DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P1020E, quirk_fsl_pcie_header);
 DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P1020, quirk_fsl_pcie_header);
+DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P1021E, quirk_fsl_pcie_header);
+DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P1021, quirk_fsl_pcie_header);
 DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P1022E, quirk_fsl_pcie_header);
 DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P1022, quirk_fsl_pcie_header);
 DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P2010E, quirk_fsl_pcie_header);

arch/powerpc/sysdev/fsl_rio.c

@@ -240,12 +240,13 @@ struct rio_priv {
 
 static void __iomem *rio_regs_win;
 
+#ifdef CONFIG_E500
 static int (*saved_mcheck_exception)(struct pt_regs *regs);
 
 static int fsl_rio_mcheck_exception(struct pt_regs *regs)
 {
 	const struct exception_table_entry *entry = NULL;
-	unsigned long reason = (mfspr(SPRN_MCSR) & MCSR_MASK);
+	unsigned long reason = mfspr(SPRN_MCSR);
 
 	if (reason & MCSR_BUS_RBERR) {
 		reason = in_be32((u32 *)(rio_regs_win + RIO_LTLEDCSR));
@@ -269,6 +270,7 @@ static int fsl_rio_mcheck_exception(struct pt_regs *regs)
 	else
 		return cur_cpu_spec->machine_check(regs);
 }
+#endif
 
 /**
  * fsl_rio_doorbell_send - Send a MPC85xx doorbell message
@@ -1517,8 +1519,10 @@ int fsl_rio_setup(struct platform_device *dev)
 	fsl_rio_doorbell_init(port);
 	fsl_rio_port_write_init(port);
 
+#ifdef CONFIG_E500
 	saved_mcheck_exception = ppc_md.machine_check_exception;
 	ppc_md.machine_check_exception = fsl_rio_mcheck_exception;
+#endif
 	/* Ensure that RFXE is set */
 	mtspr(SPRN_HID1, (mfspr(SPRN_HID1) | 0x20000));
 

arch/powerpc/sysdev/qe_lib/qe.c

@@ -640,6 +640,7 @@ unsigned int qe_get_num_of_snums(void)
 		if ((num_of_snums < 28) || (num_of_snums > QE_NUM_OF_SNUM)) {
 			/* No QE ever has fewer than 28 SNUMs */
 			pr_err("QE: number of snum is invalid\n");
+			of_node_put(qe);
 			return -EINVAL;
 		}
 	}

include/linux/pci_ids.h

@@ -2300,6 +2300,8 @@
 #define PCI_DEVICE_ID_P2010		0x0079
 #define PCI_DEVICE_ID_P1020E		0x0100
 #define PCI_DEVICE_ID_P1020		0x0101
+#define PCI_DEVICE_ID_P1021E		0x0102
+#define PCI_DEVICE_ID_P1021		0x0103
 #define PCI_DEVICE_ID_P1011E		0x0108
 #define PCI_DEVICE_ID_P1011		0x0109
 #define PCI_DEVICE_ID_P1022E		0x0110