Skip to content

L
linux
Commit a45cd9aa authored by Rusty Russell's avatar Rusty Russell Committed by Stephen Hemminger
Browse files
Options

[PATCH] Remove modules.txt drivers_net_wan_Kconfig 

From:  Nicolas Kaiser <nikai@nikai.net>
parent 57001870
Show whitespace changes
Inline Side-by-side
Showing with 37 additions and 74 deletions
drivers/net/wan/Kconfig
View file @ a45cd9aa
...@@ -52,10 +52,7 @@ config COSA ...@@ -52,10 +52,7 @@ config COSA
<file:drivers/net/wan/cosa.c> for details about the cards and the driver <file:drivers/net/wan/cosa.c> for details about the cards and the driver
itself. itself.
The driver will be compiled as a module ( = code which can be The driver will be compiled as a module: the module will be called cosa.
inserted in and removed from the running kernel whenever you want).
The module will be called cosa. For general information about
modules read <file:Documentation/modules.txt>.
# #
# COMX drivers # COMX drivers
...@@ -76,8 +73,8 @@ config COMX ...@@ -76,8 +73,8 @@ config COMX
You must say Y to "/proc file system support" (CONFIG_PROC_FS) to You must say Y to "/proc file system support" (CONFIG_PROC_FS) to
use this driver. use this driver.
If you want to compile this as a module, say M and read To compile this driver as a module, choose M here: the
<file:Documentation/modules.txt>. The module will be called comx. module will be called comx.
config COMX_HW_COMX config COMX_HW_COMX
tristate "Support for COMX/CMX/HiCOMX boards" tristate "Support for COMX/CMX/HiCOMX boards"
...@@ -89,9 +86,8 @@ config COMX_HW_COMX ...@@ -89,9 +86,8 @@ config COMX_HW_COMX
You will need additional firmware to use these cards, which are You will need additional firmware to use these cards, which are
downloadable from <ftp://ftp.itc.hu/>. downloadable from <ftp://ftp.itc.hu/>.
If you want to compile this as a module, say M and read To compile this driver as a module, choose M here: the
<file:Documentation/modules.txt>. The module will be called module will be called comx-hw-comx.
comx-hw-comx.
config COMX_HW_LOCOMX config COMX_HW_LOCOMX
tristate "Support for LoCOMX board" tristate "Support for LoCOMX board"
...@@ -100,9 +96,8 @@ config COMX_HW_LOCOMX ...@@ -100,9 +96,8 @@ config COMX_HW_LOCOMX
Hardware driver for the 'LoCOMX' board from the MultiGate family. Hardware driver for the 'LoCOMX' board from the MultiGate family.
Say Y if you have a board like this. Say Y if you have a board like this.
If you want to compile this as a module, say M and read To compile this driver as a module, choose M here: the
<file:Documentation/modules.txt>. The module will be called module will be called comx-hw-locomx.
comx-hw-locomx.
config COMX_HW_MIXCOM config COMX_HW_MIXCOM
tristate "Support for MixCOM board" tristate "Support for MixCOM board"
...@@ -118,9 +113,8 @@ config COMX_HW_MIXCOM ...@@ -118,9 +113,8 @@ config COMX_HW_MIXCOM
driver for the flash ROM of this card is available separately on driver for the flash ROM of this card is available separately on
<ftp://ftp.itc.hu/>. <ftp://ftp.itc.hu/>.
If you want to compile this as a module, say M and read To compile this driver as a module, choose M here: the
<file:Documentation/modules.txt>. The module will be called module will be called comx-hw-mixcom.
comx-hw-mixcom.
config COMX_HW_MUNICH config COMX_HW_MUNICH
tristate "Support for MUNICH based boards: SliceCOM, PCICOM (WelCOM)" tristate "Support for MUNICH based boards: SliceCOM, PCICOM (WelCOM)"
...@@ -129,10 +123,8 @@ config COMX_HW_MUNICH ...@@ -129,10 +123,8 @@ config COMX_HW_MUNICH
Hardware driver for the 'SliceCOM' (channelized E1) and 'PciCOM' Hardware driver for the 'SliceCOM' (channelized E1) and 'PciCOM'
boards (X21) from the MultiGate family. boards (X21) from the MultiGate family.
This driver is also available as a module ( = code which can be To compile this driver as a module, choose M here: the
inserted in and removed from the running kernel whenever you want). module will be called comx-hw-munich.
The module will be called comx-hw-munich. If you want to compile it
as a module, say M here and read Documentation/modules.txt.
Read linux/Documentation/networking/slicecom.txt for help on Read linux/Documentation/networking/slicecom.txt for help on
configuring and using SliceCOM interfaces. Further info on these cards configuring and using SliceCOM interfaces. Further info on these cards
...@@ -146,8 +138,7 @@ config COMX_PROTO_PPP ...@@ -146,8 +138,7 @@ config COMX_PROTO_PPP
boards. Say Y if you want to use either protocol on your MultiGate boards. Say Y if you want to use either protocol on your MultiGate
boards. boards.
If you want to compile this as a module, say M and read To compile this as a module, choose M here: the module will be called
<file:Documentation/modules.txt>. The module will be called
comx-proto-ppp. comx-proto-ppp.
config COMX_PROTO_LAPB config COMX_PROTO_LAPB
...@@ -157,8 +148,7 @@ config COMX_PROTO_LAPB ...@@ -157,8 +148,7 @@ config COMX_PROTO_LAPB
LAPB protocol driver for all MultiGate boards. Say Y if you LAPB protocol driver for all MultiGate boards. Say Y if you
want to use this protocol on your MultiGate boards. want to use this protocol on your MultiGate boards.
If you want to compile this as a module, say M and read To compile this as a module, choose M here: the module will be called
<file:Documentation/modules.txt>. The module will be called
comx-proto-lapb. comx-proto-lapb.
config COMX_PROTO_FR config COMX_PROTO_FR
...@@ -168,8 +158,7 @@ config COMX_PROTO_FR ...@@ -168,8 +158,7 @@ config COMX_PROTO_FR
Frame Relay protocol driver for all MultiGate boards. Say Y if you Frame Relay protocol driver for all MultiGate boards. Say Y if you
want to use this protocol on your MultiGate boards. want to use this protocol on your MultiGate boards.
If you want to compile this as a module, say M and read To compile this as a module, choose M here: the module will be called
<file:Documentation/modules.txt>. The module will be called
comx-proto-fr. comx-proto-fr.
config DSCC4 config DSCC4
...@@ -181,10 +170,8 @@ config DSCC4 ...@@ -181,10 +170,8 @@ config DSCC4
ports card. Take a look at <http://www.cogenit.fr/dscc4/> ports card. Take a look at <http://www.cogenit.fr/dscc4/>
for further informations about the driver and his configuration. for further informations about the driver and his configuration.
The driver will be compiled as a module ( = code which can be To compile this driver as a module, choose M here: the module
inserted in and removed from the running kernel whenever you want). will be called dscc4.
The module will be called dscc4. For general information about
modules read <file:Documentation/modules.txt>.
config DSCC4_PCISYNC config DSCC4_PCISYNC
bool "Etinc PCISYNC features" bool "Etinc PCISYNC features"
...@@ -237,10 +224,8 @@ config LANMEDIA ...@@ -237,10 +224,8 @@ config LANMEDIA
To change setting such as syncPPP vs cisco HDLC or clock source you To change setting such as syncPPP vs cisco HDLC or clock source you
will need lmcctl. It is available at <ftp://ftp.lanmedia.com/>. will need lmcctl. It is available at <ftp://ftp.lanmedia.com/>.
This code is also available as a module called lmc ( = code To compile this driver as a module, choose M here: the module
which can be inserted in and removed from the running kernel will be called lmc.
whenever you want). If you want to compile it as a module, say M
here and read <file:Documentation/modules.txt>.
# There is no way to detect a Sealevel board. Force it modular # There is no way to detect a Sealevel board. Force it modular
config SEALEVEL_4021 config SEALEVEL_4021
...@@ -276,9 +261,7 @@ config HDLC ...@@ -276,9 +261,7 @@ config HDLC
Generic HDLC driver currently supports raw HDLC, Cisco HDLC, Frame Generic HDLC driver currently supports raw HDLC, Cisco HDLC, Frame
Relay, synchronous Point-to-Point Protocol (PPP) and X.25. Relay, synchronous Point-to-Point Protocol (PPP) and X.25.
If you want to compile the driver as a module ( = code which can be To compile this driver as a module, choose M here: the module
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt>. The module
will be called hdlc. will be called hdlc.
If unsure, say N here. If unsure, say N here.
...@@ -377,9 +360,7 @@ config PC300 ...@@ -377,9 +360,7 @@ config PC300
option below this one and read the file README.mlppp provided by PC300 option below this one and read the file README.mlppp provided by PC300
package. package.
If you want to compile this as a module ( = code which can be To compile this as a module, choose M here: the module will be
inserted in and removed from the running kernel whenever you want),
say M here and read Documentation/modules.txt. The module will be
called pc300. called pc300.
If you haven't heard about it, it's safe to say N. If you haven't heard about it, it's safe to say N.
...@@ -407,9 +388,7 @@ config N2 ...@@ -407,9 +388,7 @@ config N2
Note that N2csu and N2dds cards are not supported by this driver. Note that N2csu and N2dds cards are not supported by this driver.
If you want to compile the driver as a module ( = code which can be To compile this driver as a module, choose M here: the module
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt>. The module
will be called n2. will be called n2.
If unsure, say N here. If unsure, say N here.
...@@ -422,9 +401,7 @@ config C101 ...@@ -422,9 +401,7 @@ config C101
Technologies Co., Ltd. If you have such a card, Technologies Co., Ltd. If you have such a card,
say Y here and see <http://hq.pm.waw.pl/pub/hdlc/> say Y here and see <http://hq.pm.waw.pl/pub/hdlc/>
If you want to compile the driver as a module ( = code which can be To compile this driver as a module, choose M here: the module
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt>. The module
will be called c101. will be called c101.
If unsure, say N here. If unsure, say N here.
...@@ -439,13 +416,11 @@ config FARSYNC ...@@ -439,13 +416,11 @@ config FARSYNC
8Mb/s (128K on V.24) using synchronous PPP, Cisco HDLC, raw HDLC, 8Mb/s (128K on V.24) using synchronous PPP, Cisco HDLC, raw HDLC,
Frame Relay or X.25/LAPB. Frame Relay or X.25/LAPB.
If you want to compile this driver as a module ( = code which can be To compile this driver as a module, choose M here: the module will be
inserted in and removed from the running kernel whenever you want) called farsync. If you want the module to be automatically loaded
say M here and read <file:Documentation/modules.txt>. when the interface is referenced then you should add
The module will be called farsync and if you want the module to be "alias hdlcX farsync" to /etc/modules.conf for each interface, where
automatically loaded when the interface is referenced then you X is 0, 1, 2, ...
should add "alias hdlcX farsync" to /etc/modules.conf for each
interface, where X is 0, 1, 2, ...
config DLCI config DLCI
tristate "Frame relay DLCI support" tristate "Frame relay DLCI support"
...@@ -463,10 +438,8 @@ config DLCI ...@@ -463,10 +438,8 @@ config DLCI
net-tools package as explained in net-tools package as explained in
<file:Documentation/networking/framerelay.txt>. <file:Documentation/networking/framerelay.txt>.
This driver is also available as a module ( = code which can be To compile this driver as a module, choose M here: the module will be
inserted in and removed from the running kernel whenever you want). called dlci.
The module will be called dlci. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>.
config DLCI_COUNT config DLCI_COUNT
int "Max open DLCI" int "Max open DLCI"
...@@ -496,10 +469,8 @@ config SDLA ...@@ -496,10 +469,8 @@ config SDLA
only frame relay is supported by the driver at this time. Please only frame relay is supported by the driver at this time. Please
read <file:Documentation/framerelay.txt>. read <file:Documentation/framerelay.txt>.
This driver is also available as a module ( = code which can be To compile this driver as a module, choose M here: the module will be
inserted in and removed from the running kernel whenever you want). called sdla.
The module will be called sdla. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>.
# Wan router core. # Wan router core.
config WAN_ROUTER_DRIVERS config WAN_ROUTER_DRIVERS
...@@ -546,10 +517,8 @@ config VENDOR_SANGOMA ...@@ -546,10 +517,8 @@ config VENDOR_SANGOMA
<file:Documentation/networking/wanpipe.txt>. The next questions <file:Documentation/networking/wanpipe.txt>. The next questions
will ask you about the protocols you want the driver to support. will ask you about the protocols you want the driver to support.
The driver will be compiled as a module ( = code which can be To compile this driver as a module, choose M here: the module will
inserted in and removed from the running kernel whenever you want). be called wanpipe.
The module will be called wanpipe. For general information about
modules read <file:Documentation/modules.txt>.
config WANPIPE_CHDLC config WANPIPE_CHDLC
bool "WANPIPE Cisco HDLC support" bool "WANPIPE Cisco HDLC support"
...@@ -638,10 +607,8 @@ config CYCLADES_SYNC ...@@ -638,10 +607,8 @@ config CYCLADES_SYNC
additional details, I hope to have documentation available as soon additional details, I hope to have documentation available as soon
as possible. (Cyclades Brazil is writing the Documentation). as possible. (Cyclades Brazil is writing the Documentation).
The driver will be compiled as a module ( = code which can be To compile this driver as a module, choose M here: the module will be
inserted in and removed from the running kernel whenever you want). called cyclomx.
The module will be called cyclomx. For general information about
modules read <file:Documentation/modules.txt>.
config CYCLOMX_X25 config CYCLOMX_X25
bool "Cyclom 2X X.25 support (EXPERIMENTAL)" bool "Cyclom 2X X.25 support (EXPERIMENTAL)"
...@@ -664,9 +631,7 @@ config LAPBETHER ...@@ -664,9 +631,7 @@ config LAPBETHER
need to say Y or M to the driver for your Ethernet card as well as need to say Y or M to the driver for your Ethernet card as well as
to "LAPB Data Link Driver". to "LAPB Data Link Driver".
If you want to compile this driver as a module ( = code which can be To compile this driver as a module, choose M here: the module
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt>. The module
will be called lapbether. If unsure, say N. will be called lapbether. If unsure, say N.
config X25_ASY config X25_ASY
...@@ -679,9 +644,7 @@ config X25_ASY ...@@ -679,9 +644,7 @@ config X25_ASY
currently comply with the asynchronous HDLS framing protocols in currently comply with the asynchronous HDLS framing protocols in
CCITT recommendation X.25. CCITT recommendation X.25.
If you want to compile this driver as a module ( = code which can be To compile this driver as a module, choose M here: the module
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt>. The module
will be called x25_asy. If unsure, say N. will be called x25_asy. If unsure, say N.
config SBNI config SBNI
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7