Skip to content

L
linux
Commit a45cd9aa authored by Rusty Russell's avatar Rusty Russell Committed by Stephen Hemminger
Browse files
Options

[PATCH] Remove modules.txt drivers_net_wan_Kconfig 

From:  Nicolas Kaiser <nikai@nikai.net>
parent 57001870
Show whitespace changes
Inline Side-by-side
Showing with 37 additions and 74 deletions
drivers/net/wan/Kconfig
View file @ a45cd9aa
......@@ -52,10 +52,7 @@ config COSA
<file:drivers/net/wan/cosa.c> for details about the cards and the driver
itself.
The driver will be compiled as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called cosa. For general information about
modules read <file:Documentation/modules.txt>.
The driver will be compiled as a module: the module will be called cosa.
#
# COMX drivers
......@@ -76,8 +73,8 @@ config COMX
You must say Y to "/proc file system support" (CONFIG_PROC_FS) to
use this driver.
If you want to compile this as a module, say M and read
<file:Documentation/modules.txt>. The module will be called comx.
To compile this driver as a module, choose M here: the
module will be called comx.
config COMX_HW_COMX
tristate "Support for COMX/CMX/HiCOMX boards"
......@@ -89,9 +86,8 @@ config COMX_HW_COMX
You will need additional firmware to use these cards, which are
downloadable from <ftp://ftp.itc.hu/>.
If you want to compile this as a module, say M and read
<file:Documentation/modules.txt>. The module will be called
comx-hw-comx.
To compile this driver as a module, choose M here: the
module will be called comx-hw-comx.
config COMX_HW_LOCOMX
tristate "Support for LoCOMX board"
......@@ -100,9 +96,8 @@ config COMX_HW_LOCOMX
Hardware driver for the 'LoCOMX' board from the MultiGate family.
Say Y if you have a board like this.
If you want to compile this as a module, say M and read
<file:Documentation/modules.txt>. The module will be called
comx-hw-locomx.
To compile this driver as a module, choose M here: the
module will be called comx-hw-locomx.
config COMX_HW_MIXCOM
tristate "Support for MixCOM board"
......@@ -118,9 +113,8 @@ config COMX_HW_MIXCOM
driver for the flash ROM of this card is available separately on
<ftp://ftp.itc.hu/>.
If you want to compile this as a module, say M and read
<file:Documentation/modules.txt>. The module will be called
comx-hw-mixcom.
To compile this driver as a module, choose M here: the
module will be called comx-hw-mixcom.
config COMX_HW_MUNICH
tristate "Support for MUNICH based boards: SliceCOM, PCICOM (WelCOM)"
......@@ -129,10 +123,8 @@ config COMX_HW_MUNICH
Hardware driver for the 'SliceCOM' (channelized E1) and 'PciCOM'
boards (X21) from the MultiGate family.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called comx-hw-munich. If you want to compile it
as a module, say M here and read Documentation/modules.txt.
To compile this driver as a module, choose M here: the
module will be called comx-hw-munich.
Read linux/Documentation/networking/slicecom.txt for help on
configuring and using SliceCOM interfaces. Further info on these cards
......@@ -146,8 +138,7 @@ config COMX_PROTO_PPP
boards. Say Y if you want to use either protocol on your MultiGate
boards.
If you want to compile this as a module, say M and read
<file:Documentation/modules.txt>. The module will be called
To compile this as a module, choose M here: the module will be called
comx-proto-ppp.
config COMX_PROTO_LAPB
......@@ -157,8 +148,7 @@ config COMX_PROTO_LAPB
LAPB protocol driver for all MultiGate boards. Say Y if you
want to use this protocol on your MultiGate boards.
If you want to compile this as a module, say M and read
<file:Documentation/modules.txt>. The module will be called
To compile this as a module, choose M here: the module will be called
comx-proto-lapb.
config COMX_PROTO_FR
......@@ -168,8 +158,7 @@ config COMX_PROTO_FR
Frame Relay protocol driver for all MultiGate boards. Say Y if you
want to use this protocol on your MultiGate boards.
If you want to compile this as a module, say M and read
<file:Documentation/modules.txt>. The module will be called
To compile this as a module, choose M here: the module will be called
comx-proto-fr.
config DSCC4
......@@ -181,10 +170,8 @@ config DSCC4
ports card. Take a look at <http://www.cogenit.fr/dscc4/>
for further informations about the driver and his configuration.
The driver will be compiled as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called dscc4. For general information about
modules read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the module
will be called dscc4.
config DSCC4_PCISYNC
bool "Etinc PCISYNC features"
......@@ -237,10 +224,8 @@ config LANMEDIA
To change setting such as syncPPP vs cisco HDLC or clock source you
will need lmcctl. It is available at <ftp://ftp.lanmedia.com/>.
This code is also available as a module called lmc ( = code
which can be inserted in and removed from the running kernel
whenever you want). If you want to compile it as a module, say M
here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the module
will be called lmc.
# There is no way to detect a Sealevel board. Force it modular
config SEALEVEL_4021
......@@ -276,9 +261,7 @@ config HDLC
Generic HDLC driver currently supports raw HDLC, Cisco HDLC, Frame
Relay, synchronous Point-to-Point Protocol (PPP) and X.25.
If you want to compile the driver as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt>. The module
To compile this driver as a module, choose M here: the module
will be called hdlc.
If unsure, say N here.
......@@ -377,9 +360,7 @@ config PC300
option below this one and read the file README.mlppp provided by PC300
package.
If you want to compile this as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read Documentation/modules.txt. The module will be
To compile this as a module, choose M here: the module will be
called pc300.
If you haven't heard about it, it's safe to say N.
......@@ -407,9 +388,7 @@ config N2
Note that N2csu and N2dds cards are not supported by this driver.
If you want to compile the driver as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt>. The module
To compile this driver as a module, choose M here: the module
will be called n2.
If unsure, say N here.
......@@ -422,9 +401,7 @@ config C101
Technologies Co., Ltd. If you have such a card,
say Y here and see <http://hq.pm.waw.pl/pub/hdlc/>
If you want to compile the driver as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt>. The module
To compile this driver as a module, choose M here: the module
will be called c101.
If unsure, say N here.
......@@ -439,13 +416,11 @@ config FARSYNC
8Mb/s (128K on V.24) using synchronous PPP, Cisco HDLC, raw HDLC,
Frame Relay or X.25/LAPB.
If you want to compile this driver as a module ( = code which can be
inserted in and removed from the running kernel whenever you want)
say M here and read <file:Documentation/modules.txt>.
The module will be called farsync and if you want the module to be
automatically loaded when the interface is referenced then you
should add "alias hdlcX farsync" to /etc/modules.conf for each
interface, where X is 0, 1, 2, ...
To compile this driver as a module, choose M here: the module will be
called farsync. If you want the module to be automatically loaded
when the interface is referenced then you should add
"alias hdlcX farsync" to /etc/modules.conf for each interface, where
X is 0, 1, 2, ...
config DLCI
tristate "Frame relay DLCI support"
......@@ -463,10 +438,8 @@ config DLCI
net-tools package as explained in
<file:Documentation/networking/framerelay.txt>.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called dlci. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the module will be
called dlci.
config DLCI_COUNT
int "Max open DLCI"
......@@ -496,10 +469,8 @@ config SDLA
only frame relay is supported by the driver at this time. Please
read <file:Documentation/framerelay.txt>.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called sdla. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the module will be
called sdla.
# Wan router core.
config WAN_ROUTER_DRIVERS
......@@ -546,10 +517,8 @@ config VENDOR_SANGOMA
<file:Documentation/networking/wanpipe.txt>. The next questions
will ask you about the protocols you want the driver to support.
The driver will be compiled as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called wanpipe. For general information about
modules read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the module will
be called wanpipe.
config WANPIPE_CHDLC
bool "WANPIPE Cisco HDLC support"
......@@ -638,10 +607,8 @@ config CYCLADES_SYNC
additional details, I hope to have documentation available as soon
as possible. (Cyclades Brazil is writing the Documentation).
The driver will be compiled as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called cyclomx. For general information about
modules read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the module will be
called cyclomx.
config CYCLOMX_X25
bool "Cyclom 2X X.25 support (EXPERIMENTAL)"
......@@ -664,9 +631,7 @@ config LAPBETHER
need to say Y or M to the driver for your Ethernet card as well as
to "LAPB Data Link Driver".
If you want to compile this driver as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt>. The module
To compile this driver as a module, choose M here: the module
will be called lapbether. If unsure, say N.
config X25_ASY
......@@ -679,9 +644,7 @@ config X25_ASY
currently comply with the asynchronous HDLS framing protocols in
CCITT recommendation X.25.
If you want to compile this driver as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt>. The module
To compile this driver as a module, choose M here: the module
will be called x25_asy. If unsure, say N.
config SBNI
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7