cxl: Calculate region bandwidth of targets with shared upstream link

The current bandwidth calculation aggregates all the targets. This simple
method does not take into account where multiple targets sharing under
a switch or a root port where the aggregated bandwidth can be greater than
the upstream link of the switch.

To accurately account for the shared upstream uplink cases, a new update
function is introduced by walking from the leaves to the root of the
hierarchy and clamp the bandwidth in the process as needed. This process
is done when all the targets for a region are present but before the
final values are send to the HMAT handling code cached access_coordinate
targets.

The original perf calculation path was kept to calculate the latency
performance data that does not require the shared link consideration.
The shared upstream link calculation is done as a second pass when all
the endpoints have arrived.

Testing is done via qemu with CXL hierarchy. run_qemu[1] is modified to
support several CXL hierarchy layouts. The following layouts are tested:

HB: Host Bridge
RP: Root Port
SW: Switch
EP: End Point

2 HB 2 RP 2 EP: resulting bandwidth: 624
1 HB 2 RP 2 EP: resulting bandwidth: 624
2 HB 2 RP 2 SW 4 EP: resulting bandwidth: 624

Current testing, perf number from SRAT/HMAT is hacked into the kernel
code. However with new QEMU support of Generic Target Port that's
incoming, the perf data injection is no longer needed.

[1]: https://github.com/pmem/run_qemuSuggested-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Link: https://lore.kernel.org/linux-cxl/20240501152503.00002e60@Huawei.com/Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Link: https://patch.msgid.link/20240904001316.1688225-3-dave.jiang@intel.comSigned-off-by: Dave Jiang <dave.jiang@intel.com>

drivers/cxl/core/cdat.c

@@ -547,19 +547,37 @@ void cxl_coordinates_combine(struct access_coordinate *out,
 
 MODULE_IMPORT_NS(CXL);
 
-void cxl_region_perf_data_calculate(struct cxl_region *cxlr,
-				    struct cxl_endpoint_decoder *cxled)
+static void cxl_bandwidth_add(struct access_coordinate *coord,
+			      struct access_coordinate *c1,
+			      struct access_coordinate *c2)
+{
+	for (int i = 0; i < ACCESS_COORDINATE_MAX; i++) {
+		coord[i].read_bandwidth = c1[i].read_bandwidth +
+					  c2[i].read_bandwidth;
+		coord[i].write_bandwidth = c1[i].write_bandwidth +
+					   c2[i].write_bandwidth;
+	}
+}
+
+static bool dpa_perf_contains(struct cxl_dpa_perf *perf,
+			      struct resource *dpa_res)
 {
-	struct cxl_memdev *cxlmd = cxled_to_memdev(cxled);
-	struct cxl_dev_state *cxlds = cxlmd->cxlds;
-	struct cxl_memdev_state *mds = to_cxl_memdev_state(cxlds);
 	struct range dpa = {
-			.start = cxled->dpa_res->start,
-			.end = cxled->dpa_res->end,
+		.start = dpa_res->start,
+		.end = dpa_res->end,
 	};
+
+	return range_contains(&perf->dpa_range, &dpa);
+}
+
+static struct cxl_dpa_perf *cxled_get_dpa_perf(struct cxl_endpoint_decoder *cxled,
+					       enum cxl_decoder_mode mode)
+{
+	struct cxl_memdev *cxlmd = cxled_to_memdev(cxled);
+	struct cxl_memdev_state *mds = to_cxl_memdev_state(cxlmd->cxlds);
 	struct cxl_dpa_perf *perf;
 
-	switch (cxlr->mode) {
+	switch (mode) {
 	case CXL_DECODER_RAM:
 		perf = &mds->ram_perf;
 		break;
@@ -567,12 +585,473 @@ void cxl_region_perf_data_calculate(struct cxl_region *cxlr,
 		perf = &mds->pmem_perf;
 		break;
 	default:
+		return ERR_PTR(-EINVAL);
+	}
+
+	if (!dpa_perf_contains(perf, cxled->dpa_res))
+		return ERR_PTR(-EINVAL);
+
+	return perf;
+}
+
+/*
+ * Transient context for containing the current calculation of bandwidth when
+ * doing walking the port hierarchy to deal with shared upstream link.
+ */
+struct cxl_perf_ctx {
+	struct access_coordinate coord[ACCESS_COORDINATE_MAX];
+	struct cxl_port *port;
+};
+
+/**
+ * cxl_endpoint_gather_bandwidth - collect all the endpoint bandwidth in an xarray
+ * @cxlr: CXL region for the bandwidth calculation
+ * @cxled: endpoint decoder to start on
+ * @usp_xa: (output) the xarray that collects all the bandwidth coordinates
+ *          indexed by the upstream device with data of 'struct cxl_perf_ctx'.
+ * @gp_is_root: (output) bool of whether the grandparent is cxl root.
+ *
+ * Return: 0 for success or -errno
+ *
+ * Collects aggregated endpoint bandwidth and store the bandwidth in
+ * an xarray indexed by the upstream device of the switch or the RP
+ * device. Each endpoint consists the minimum of the bandwidth from DSLBIS
+ * from the endpoint CDAT, the endpoint upstream link bandwidth, and the
+ * bandwidth from the SSLBIS of the switch CDAT for the switch upstream port to
+ * the downstream port that's associated with the endpoint. If the
+ * device is directly connected to a RP, then no SSLBIS is involved.
+ */
+static int cxl_endpoint_gather_bandwidth(struct cxl_region *cxlr,
+					 struct cxl_endpoint_decoder *cxled,
+					 struct xarray *usp_xa,
+					 bool *gp_is_root)
+{
+	struct cxl_port *endpoint = to_cxl_port(cxled->cxld.dev.parent);
+	struct cxl_port *parent_port = to_cxl_port(endpoint->dev.parent);
+	struct cxl_port *gp_port = to_cxl_port(parent_port->dev.parent);
+	struct access_coordinate pci_coord[ACCESS_COORDINATE_MAX];
+	struct access_coordinate sw_coord[ACCESS_COORDINATE_MAX];
+	struct access_coordinate ep_coord[ACCESS_COORDINATE_MAX];
+	struct cxl_memdev *cxlmd = cxled_to_memdev(cxled);
+	struct cxl_dev_state *cxlds = cxlmd->cxlds;
+	struct pci_dev *pdev = to_pci_dev(cxlds->dev);
+	struct cxl_perf_ctx *perf_ctx;
+	struct cxl_dpa_perf *perf;
+	unsigned long index;
+	void *ptr;
+	int rc;
+
+	if (cxlds->rcd)
+		return -ENODEV;
+
+	perf = cxled_get_dpa_perf(cxled, cxlr->mode);
+	if (IS_ERR(perf))
+		return PTR_ERR(perf);
+
+	gp_port = to_cxl_port(parent_port->dev.parent);
+	*gp_is_root = is_cxl_root(gp_port);
+
+	/*
+	 * If the grandparent is cxl root, then index is the root port,
+	 * otherwise it's the parent switch upstream device.
+	 */
+	if (*gp_is_root)
+		index = (unsigned long)endpoint->parent_dport->dport_dev;
+	else
+		index = (unsigned long)parent_port->uport_dev;
+
+	perf_ctx = xa_load(usp_xa, index);
+	if (!perf_ctx) {
+		struct cxl_perf_ctx *c __free(kfree) =
+			kzalloc(sizeof(*perf_ctx), GFP_KERNEL);
+
+		if (!c)
+			return -ENOMEM;
+		ptr = xa_store(usp_xa, index, c, GFP_KERNEL);
+		if (xa_is_err(ptr))
+			return xa_err(ptr);
+		perf_ctx = no_free_ptr(c);
+		perf_ctx->port = parent_port;
+	}
+
+	/* Direct upstream link from EP bandwidth */
+	rc = cxl_pci_get_bandwidth(pdev, pci_coord);
+	if (rc < 0)
+		return rc;
+
+	/*
+	 * Min of upstream link bandwidth and Endpoint CDAT bandwidth from
+	 * DSLBIS.
+	 */
+	cxl_coordinates_combine(ep_coord, pci_coord, perf->cdat_coord);
+
+	/*
+	 * If grandparent port is root, then there's no switch involved and
+	 * the endpoint is connected to a root port.
+	 */
+	if (!*gp_is_root) {
+		/*
+		 * Retrieve the switch SSLBIS for switch downstream port
+		 * associated with the endpoint bandwidth.
+		 */
+		rc = cxl_port_get_switch_dport_bandwidth(endpoint, sw_coord);
+		if (rc)
+			return rc;
+
+		/*
+		 * Min of the earlier coordinates with the switch SSLBIS
+		 * bandwidth
+		 */
+		cxl_coordinates_combine(ep_coord, ep_coord, sw_coord);
+	}
+
+	/*
+	 * Aggregate the computed bandwidth with the current aggregated bandwidth
+	 * of the endpoints with the same switch upstream device or RP.
+	 */
+	cxl_bandwidth_add(perf_ctx->coord, perf_ctx->coord, ep_coord);
+
+	return 0;
+}
+
+static void free_perf_xa(struct xarray *xa)
+{
+	struct cxl_perf_ctx *ctx;
+	unsigned long index;
+
+	if (!xa)
+		return;
+
+	xa_for_each(xa, index, ctx)
+		kfree(ctx);
+	xa_destroy(xa);
+	kfree(xa);
+}
+DEFINE_FREE(free_perf_xa, struct xarray *, if (_T) free_perf_xa(_T))
+
+/**
+ * cxl_switch_gather_bandwidth - collect all the bandwidth at switch level in an xarray
+ * @cxlr: The region being operated on
+ * @input_xa: xarray indexed by upstream device of a switch with data of 'struct
+ *	      cxl_perf_ctx'
+ * @gp_is_root: (output) bool of whether the grandparent is cxl root.
+ *
+ * Return: a xarray of resulting cxl_perf_ctx per parent switch or root port
+ *         or ERR_PTR(-errno)
+ *
+ * Iterate through the xarray. Take the minimum of the downstream calculated
+ * bandwidth, the upstream link bandwidth, and the SSLBIS of the upstream
+ * switch if exists. Sum the resulting bandwidth under the switch upstream
+ * device or a RP device. The function can be iterated over multiple switches
+ * if the switches are present.
+ */
+static struct xarray *cxl_switch_gather_bandwidth(struct cxl_region *cxlr,
+						  struct xarray *input_xa,
+						  bool *gp_is_root)
+{
+	struct xarray *res_xa __free(free_perf_xa) =
+		kzalloc(sizeof(*res_xa), GFP_KERNEL);
+	struct access_coordinate coords[ACCESS_COORDINATE_MAX];
+	struct cxl_perf_ctx *ctx, *us_ctx;
+	unsigned long index, us_index;
+	int dev_count = 0;
+	int gp_count = 0;
+	void *ptr;
+	int rc;
+
+	if (!res_xa)
+		return ERR_PTR(-ENOMEM);
+	xa_init(res_xa);
+
+	xa_for_each(input_xa, index, ctx) {
+		struct device *dev = (struct device *)index;
+		struct cxl_port *port = ctx->port;
+		struct cxl_port *parent_port = to_cxl_port(port->dev.parent);
+		struct cxl_port *gp_port = to_cxl_port(parent_port->dev.parent);
+		struct cxl_dport *dport = port->parent_dport;
+		bool is_root = false;
+
+		dev_count++;
+		if (is_cxl_root(gp_port)) {
+			is_root = true;
+			gp_count++;
+		}
+
+		/*
+		 * If the grandparent is cxl root, then index is the root port,
+		 * otherwise it's the parent switch upstream device.
+		 */
+		if (is_root)
+			us_index = (unsigned long)port->parent_dport->dport_dev;
+		else
+			us_index = (unsigned long)parent_port->uport_dev;
+
+		us_ctx = xa_load(res_xa, us_index);
+		if (!us_ctx) {
+			struct cxl_perf_ctx *n __free(kfree) =
+				kzalloc(sizeof(*n), GFP_KERNEL);
+
+			if (!n)
+				return ERR_PTR(-ENOMEM);
+
+			ptr = xa_store(res_xa, us_index, n, GFP_KERNEL);
+			if (xa_is_err(ptr))
+				return ERR_PTR(xa_err(ptr));
+			us_ctx = no_free_ptr(n);
+			us_ctx->port = parent_port;
+		}
+
+		/*
+		 * If the device isn't an upstream PCIe port, there's something
+		 * wrong with the topology.
+		 */
+		if (!dev_is_pci(dev))
+			return ERR_PTR(-EINVAL);
+
+		/* Retrieve the upstream link bandwidth */
+		rc = cxl_pci_get_bandwidth(to_pci_dev(dev), coords);
+		if (rc)
+			return ERR_PTR(-ENXIO);
+
+		/*
+		 * Take the min of downstream bandwidth and the upstream link
+		 * bandwidth.
+		 */
+		cxl_coordinates_combine(coords, coords, ctx->coord);
+
+		/*
+		 * Take the min of the calculated bandwdith and the upstream
+		 * switch SSLBIS bandwidth if there's a parent switch
+		 */
+		if (!is_root)
+			cxl_coordinates_combine(coords, coords, dport->coord);
+
+		/*
+		 * Aggregate the calculated bandwidth common to an upstream
+		 * switch.
+		 */
+		cxl_bandwidth_add(us_ctx->coord, us_ctx->coord, coords);
+	}
+
+	/* Asymmetric topology detected. */
+	if (gp_count) {
+		if (gp_count != dev_count) {
+			dev_dbg(&cxlr->dev,
+				"Asymmetric hierarchy detected, bandwidth not updated\n");
+			return ERR_PTR(-EOPNOTSUPP);
+		}
+		*gp_is_root = true;
+	}
+
+	return no_free_ptr(res_xa);
+}
+
+/**
+ * cxl_rp_gather_bandwidth - handle the root port level bandwidth collection
+ * @xa: the xarray that holds the cxl_perf_ctx that has the bandwidth calculated
+ *      below each root port device.
+ *
+ * Return: xarray that holds cxl_perf_ctx per host bridge or ERR_PTR(-errno)
+ */
+static struct xarray *cxl_rp_gather_bandwidth(struct xarray *xa)
+{
+	struct xarray *hb_xa __free(free_perf_xa) =
+		kzalloc(sizeof(*hb_xa), GFP_KERNEL);
+	struct cxl_perf_ctx *ctx;
+	unsigned long index;
+
+	if (!hb_xa)
+		return ERR_PTR(-ENOMEM);
+	xa_init(hb_xa);
+
+	xa_for_each(xa, index, ctx) {
+		struct cxl_port *port = ctx->port;
+		unsigned long hb_index = (unsigned long)port->uport_dev;
+		struct cxl_perf_ctx *hb_ctx;
+		void *ptr;
+
+		hb_ctx = xa_load(hb_xa, hb_index);
+		if (!hb_ctx) {
+			struct cxl_perf_ctx *n __free(kfree) =
+				kzalloc(sizeof(*n), GFP_KERNEL);
+
+			if (!n)
+				return ERR_PTR(-ENOMEM);
+			ptr = xa_store(hb_xa, hb_index, n, GFP_KERNEL);
+			if (xa_is_err(ptr))
+				return ERR_PTR(xa_err(ptr));
+			hb_ctx = no_free_ptr(n);
+			hb_ctx->port = port;
+		}
+
+		cxl_bandwidth_add(hb_ctx->coord, hb_ctx->coord, ctx->coord);
+	}
+
+	return no_free_ptr(hb_xa);
+}
+
+/**
+ * cxl_hb_gather_bandwidth - handle the host bridge level bandwidth collection
+ * @xa: the xarray that holds the cxl_perf_ctx that has the bandwidth calculated
+ *      below each host bridge.
+ *
+ * Return: xarray that holds cxl_perf_ctx per ACPI0017 device or ERR_PTR(-errno)
+ */
+static struct xarray *cxl_hb_gather_bandwidth(struct xarray *xa)
+{
+	struct xarray *mw_xa __free(free_perf_xa) =
+		kzalloc(sizeof(*mw_xa), GFP_KERNEL);
+	struct cxl_perf_ctx *ctx;
+	unsigned long index;
+
+	if (!mw_xa)
+		return ERR_PTR(-ENOMEM);
+	xa_init(mw_xa);
+
+	xa_for_each(xa, index, ctx) {
+		struct cxl_port *port = ctx->port;
+		struct cxl_port *parent_port;
+		struct cxl_perf_ctx *mw_ctx;
+		struct cxl_dport *dport;
+		unsigned long mw_index;
+		void *ptr;
+
+		parent_port = to_cxl_port(port->dev.parent);
+		mw_index = (unsigned long)parent_port->uport_dev;
+
+		mw_ctx = xa_load(mw_xa, mw_index);
+		if (!mw_ctx) {
+			struct cxl_perf_ctx *n __free(kfree) =
+				kzalloc(sizeof(*n), GFP_KERNEL);
+
+			if (!n)
+				return ERR_PTR(-ENOMEM);
+			ptr = xa_store(mw_xa, mw_index, n, GFP_KERNEL);
+			if (xa_is_err(ptr))
+				return ERR_PTR(xa_err(ptr));
+			mw_ctx = no_free_ptr(n);
+		}
+
+		dport = port->parent_dport;
+		cxl_coordinates_combine(ctx->coord, ctx->coord, dport->coord);
+		cxl_bandwidth_add(mw_ctx->coord, mw_ctx->coord, ctx->coord);
+	}
+
+	return no_free_ptr(mw_xa);
+}
+
+/**
+ * cxl_region_update_bandwidth - Update the bandwidth access coordinates of a region
+ * @cxlr: The region being operated on
+ * @input_xa: xarray holds cxl_perf_ctx wht calculated bandwidth per ACPI0017 instance
+ */
+static void cxl_region_update_bandwidth(struct cxl_region *cxlr,
+					struct xarray *input_xa)
+{
+	struct access_coordinate coord[ACCESS_COORDINATE_MAX];
+	struct cxl_perf_ctx *ctx;
+	unsigned long index;
+
+	memset(coord, 0, sizeof(coord));
+	xa_for_each(input_xa, index, ctx)
+		cxl_bandwidth_add(coord, coord, ctx->coord);
+
+	for (int i = 0; i < ACCESS_COORDINATE_MAX; i++) {
+		cxlr->coord[i].read_bandwidth = coord[i].read_bandwidth;
+		cxlr->coord[i].write_bandwidth = coord[i].write_bandwidth;
+	}
+}
+
+/**
+ * cxl_region_shared_upstream_bandwidth_update - Recalculate the bandwidth for
+ *						 the region
+ * @cxlr: the cxl region to recalculate
+ *
+ * The function walks the topology from bottom up and calculates the bandwidth. It
+ * starts at the endpoints, processes at the switches if any, processes at the rootport
+ * level, at the host bridge level, and finally aggregates at the region.
+ */
+void cxl_region_shared_upstream_bandwidth_update(struct cxl_region *cxlr)
+{
+	struct xarray *working_xa;
+	int root_count = 0;
+	bool is_root;
+	int rc;
+
+	lockdep_assert_held(&cxl_dpa_rwsem);
+
+	struct xarray *usp_xa __free(free_perf_xa) =
+		kzalloc(sizeof(*usp_xa), GFP_KERNEL);
+
+	if (!usp_xa)
 		return;
+
+	xa_init(usp_xa);
+
+	/* Collect bandwidth data from all the endpoints. */
+	for (int i = 0; i < cxlr->params.nr_targets; i++) {
+		struct cxl_endpoint_decoder *cxled = cxlr->params.targets[i];
+
+		is_root = false;
+		rc = cxl_endpoint_gather_bandwidth(cxlr, cxled, usp_xa, &is_root);
+		if (rc)
+			return;
+		root_count += is_root;
 	}
 
+	/* Detect asymmetric hierarchy with some direct attached endpoints. */
+	if (root_count && root_count != cxlr->params.nr_targets) {
+		dev_dbg(&cxlr->dev,
+			"Asymmetric hierarchy detected, bandwidth not updated\n");
+		return;
+	}
+
+	/*
+	 * Walk up one or more switches to deal with the bandwidth of the
+	 * switches if they exist. Endpoints directly attached to RPs skip
+	 * over this part.
+	 */
+	if (!root_count) {
+		do {
+			working_xa = cxl_switch_gather_bandwidth(cxlr, usp_xa,
+								 &is_root);
+			if (IS_ERR(working_xa))
+				return;
+			free_perf_xa(usp_xa);
+			usp_xa = working_xa;
+		} while (!is_root);
+	}
+
+	/* Handle the bandwidth at the root port of the hierarchy */
+	working_xa = cxl_rp_gather_bandwidth(usp_xa);
+	if (IS_ERR(working_xa))
+		return;
+	free_perf_xa(usp_xa);
+	usp_xa = working_xa;
+
+	/* Handle the bandwidth at the host bridge of the hierarchy */
+	working_xa = cxl_hb_gather_bandwidth(usp_xa);
+	if (IS_ERR(working_xa))
+		return;
+	free_perf_xa(usp_xa);
+	usp_xa = working_xa;
+
+	/*
+	 * Aggregate all the bandwidth collected per CFMWS (ACPI0017) and
+	 * update the region bandwidth with the final calculated values.
+	 */
+	cxl_region_update_bandwidth(cxlr, usp_xa);
+}
+
+void cxl_region_perf_data_calculate(struct cxl_region *cxlr,
+				    struct cxl_endpoint_decoder *cxled)
+{
+	struct cxl_dpa_perf *perf;
+
 	lockdep_assert_held(&cxl_dpa_rwsem);
 
-	if (!range_contains(&perf->dpa_range, &dpa))
+	perf = cxled_get_dpa_perf(cxled, cxlr->mode);
+	if (IS_ERR(perf))
 		return;
 
 	for (int i = 0; i < ACCESS_COORDINATE_MAX; i++) {

drivers/cxl/core/core.h

@@ -103,9 +103,11 @@ enum cxl_poison_trace_type {
 };
 
 long cxl_pci_get_latency(struct pci_dev *pdev);
-
+int cxl_pci_get_bandwidth(struct pci_dev *pdev, struct access_coordinate *c);
 int cxl_update_hmat_access_coordinates(int nid, struct cxl_region *cxlr,
 				       enum access_coordinate_class access);
 bool cxl_need_node_perf_attrs_update(int nid);
+int cxl_port_get_switch_dport_bandwidth(struct cxl_port *port,
+					struct access_coordinate *c);
 
 #endif /* __CXL_CORE_H__ */

drivers/cxl/core/pci.c

@@ -1031,3 +1031,26 @@ bool cxl_endpoint_decoder_reset_detected(struct cxl_port *port)
 				     __cxl_endpoint_decoder_reset_detected);
 }
 EXPORT_SYMBOL_NS_GPL(cxl_endpoint_decoder_reset_detected, CXL);
+
+int cxl_pci_get_bandwidth(struct pci_dev *pdev, struct access_coordinate *c)
+{
+	int speed, bw;
+	u16 lnksta;
+	u32 width;
+
+	speed = pcie_link_speed_mbps(pdev);
+	if (speed < 0)
+		return speed;
+	speed /= BITS_PER_BYTE;
+
+	pcie_capability_read_word(pdev, PCI_EXP_LNKSTA, &lnksta);
+	width = FIELD_GET(PCI_EXP_LNKSTA_NLW, lnksta);
+	bw = speed * width;
+
+	for (int i = 0; i < ACCESS_COORDINATE_MAX; i++) {
+		c[i].read_bandwidth = bw;
+		c[i].write_bandwidth = bw;
+	}
+
+	return 0;
+}

drivers/cxl/core/port.c

@@ -2237,6 +2237,26 @@ int cxl_endpoint_get_perf_coordinates(struct cxl_port *port,
 }
 EXPORT_SYMBOL_NS_GPL(cxl_endpoint_get_perf_coordinates, CXL);
 
+int cxl_port_get_switch_dport_bandwidth(struct cxl_port *port,
+					struct access_coordinate *c)
+{
+	struct cxl_dport *dport = port->parent_dport;
+
+	/* Check this port is connected to a switch DSP and not an RP */
+	if (parent_port_is_cxl_root(to_cxl_port(port->dev.parent)))
+		return -ENODEV;
+
+	if (!coordinates_valid(dport->coord))
+		return -EINVAL;
+
+	for (int i = 0; i < ACCESS_COORDINATE_MAX; i++) {
+		c[i].read_bandwidth = dport->coord[i].read_bandwidth;
+		c[i].write_bandwidth = dport->coord[i].write_bandwidth;
+	}
+
+	return 0;
+}
+
 /* for user tooling to ensure port disable work has completed */
 static ssize_t flush_store(const struct bus_type *bus, const char *buf, size_t count)
 {

drivers/cxl/core/region.c

@@ -1983,6 +1983,7 @@ static int cxl_region_attach(struct cxl_region *cxlr,
 		 * then the region is already committed.
 		 */
 		p->state = CXL_CONFIG_COMMIT;
+		cxl_region_shared_upstream_bandwidth_update(cxlr);
 
 		return 0;
 	}
@@ -2004,6 +2005,7 @@ static int cxl_region_attach(struct cxl_region *cxlr,
 		if (rc)
 			return rc;
 		p->state = CXL_CONFIG_ACTIVE;
+		cxl_region_shared_upstream_bandwidth_update(cxlr);
 	}
 
 	cxled->cxld.interleave_ways = p->interleave_ways;

drivers/cxl/cxl.h

@@ -891,6 +891,7 @@ int cxl_endpoint_get_perf_coordinates(struct cxl_port *port,
 				      struct access_coordinate *coord);
 void cxl_region_perf_data_calculate(struct cxl_region *cxlr,
 				    struct cxl_endpoint_decoder *cxled);
+void cxl_region_shared_upstream_bandwidth_update(struct cxl_region *cxlr);
 
 void cxl_memdev_update_perf(struct cxl_memdev *cxlmd);