drm/msm/dpu: always use mdp device to scale bandwidth

Currently DPU driver scales bandwidth and core clock for sc7180 only,
while the rest of chips get static bandwidth votes. Make all chipsets
scale bandwidth and clock per composition requirements like sc7180 does.
Drop old voting path completely.

Tested on RB3 (SDM845) and RB5 (SM8250).
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20210401020533.3956787-2-dmitry.baryshkov@linaro.orgSigned-off-by: Rob Clark <robdclark@chromium.org>

drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c

@@ -934,7 +934,6 @@ static int dpu_kms_hw_init(struct msm_kms *kms)
 		DPU_DEBUG("REG_DMA is not defined");
 	}
 
-	if (of_device_is_compatible(dev->dev->of_node, "qcom,sc7180-mdss"))
 	dpu_kms_parse_data_bus_icc_path(dpu_kms);
 
 	pm_runtime_get_sync(&dpu_kms->pdev->dev);

drivers/gpu/drm/msm/disp/dpu1/dpu_mdss.c

@@ -31,40 +31,8 @@ struct dpu_mdss {
 	void __iomem *mmio;
 	struct dss_module_power mp;
 	struct dpu_irq_controller irq_controller;
-	struct icc_path *path[2];
-	u32 num_paths;
 };
 
-static int dpu_mdss_parse_data_bus_icc_path(struct drm_device *dev,
-						struct dpu_mdss *dpu_mdss)
-{
-	struct icc_path *path0 = of_icc_get(dev->dev, "mdp0-mem");
-	struct icc_path *path1 = of_icc_get(dev->dev, "mdp1-mem");
-
-	if (IS_ERR_OR_NULL(path0))
-		return PTR_ERR_OR_ZERO(path0);
-
-	dpu_mdss->path[0] = path0;
-	dpu_mdss->num_paths = 1;
-
-	if (!IS_ERR_OR_NULL(path1)) {
-		dpu_mdss->path[1] = path1;
-		dpu_mdss->num_paths++;
-	}
-
-	return 0;
-}
-
-static void dpu_mdss_icc_request_bw(struct msm_mdss *mdss)
-{
-	struct dpu_mdss *dpu_mdss = to_dpu_mdss(mdss);
-	int i;
-	u64 avg_bw = dpu_mdss->num_paths ? MAX_BW / dpu_mdss->num_paths : 0;
-
-	for (i = 0; i < dpu_mdss->num_paths; i++)
-		icc_set_bw(dpu_mdss->path[i], avg_bw, kBps_to_icc(MAX_BW));
-}
-
 static void dpu_mdss_irq(struct irq_desc *desc)
 {
 	struct dpu_mdss *dpu_mdss = irq_desc_get_handler_data(desc);
@@ -178,8 +146,6 @@ static int dpu_mdss_enable(struct msm_mdss *mdss)
 	struct dss_module_power *mp = &dpu_mdss->mp;
 	int ret;
 
-	dpu_mdss_icc_request_bw(mdss);
-
 	ret = msm_dss_enable_clk(mp->clk_config, mp->num_clk, true);
 	if (ret) {
 		DPU_ERROR("clock enable failed, ret:%d\n", ret);
@@ -213,15 +179,12 @@ static int dpu_mdss_disable(struct msm_mdss *mdss)
 {
 	struct dpu_mdss *dpu_mdss = to_dpu_mdss(mdss);
 	struct dss_module_power *mp = &dpu_mdss->mp;
-	int ret, i;
+	int ret;
 
 	ret = msm_dss_enable_clk(mp->clk_config, mp->num_clk, false);
 	if (ret)
 		DPU_ERROR("clock disable failed, ret:%d\n", ret);
 
-	for (i = 0; i < dpu_mdss->num_paths; i++)
-		icc_set_bw(dpu_mdss->path[i], 0, 0);
-
 	return ret;
 }
 
@@ -232,7 +195,6 @@ static void dpu_mdss_destroy(struct drm_device *dev)
 	struct dpu_mdss *dpu_mdss = to_dpu_mdss(priv->mdss);
 	struct dss_module_power *mp = &dpu_mdss->mp;
 	int irq;
-	int i;
 
 	pm_runtime_suspend(dev->dev);
 	pm_runtime_disable(dev->dev);
@@ -242,9 +204,6 @@ static void dpu_mdss_destroy(struct drm_device *dev)
 	msm_dss_put_clk(mp->clk_config, mp->num_clk);
 	devm_kfree(&pdev->dev, mp->clk_config);
 
-	for (i = 0; i < dpu_mdss->num_paths; i++)
-		icc_put(dpu_mdss->path[i]);
-
 	if (dpu_mdss->mmio)
 		devm_iounmap(&pdev->dev, dpu_mdss->mmio);
 	dpu_mdss->mmio = NULL;
@@ -276,12 +235,6 @@ int dpu_mdss_init(struct drm_device *dev)
 
 	DRM_DEBUG("mapped mdss address space @%pK\n", dpu_mdss->mmio);
 
-	if (!of_device_is_compatible(dev->dev->of_node, "qcom,sc7180-mdss")) {
-		ret = dpu_mdss_parse_data_bus_icc_path(dev, dpu_mdss);
-		if (ret)
-			return ret;
-	}
-
 	mp = &dpu_mdss->mp;
 	ret = msm_dss_parse_clock(pdev, mp);
 	if (ret) {
@@ -307,8 +260,6 @@ int dpu_mdss_init(struct drm_device *dev)
 
 	pm_runtime_enable(dev->dev);
 
-	dpu_mdss_icc_request_bw(priv->mdss);
-
 	return ret;
 
 irq_error: