[ARM] pxa: separate GPIOs and their mode definitions to pxa2xx-gpio.h

two reasons:
1. GPIO namings and their mode definitions are conceptually not part
   of the PXA register definitions

2. this is actually a temporary move in the transition of PXA2xx to
   use MFP-alike APIs (as what PXA3xx is now doing), so that legacy
   code will still work and new code can be added in step by step
Signed-off-by: eric miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

arch/arm/mach-pxa/clock.c

@@ -13,6 +13,7 @@
 #include <linux/delay.h>
 
 #include <asm/arch/pxa-regs.h>
+#include <asm/arch/pxa2xx-gpio.h>
 #include <asm/hardware.h>
 
 #include "devices.h"

arch/arm/mach-pxa/cm-x270-pci.c

@@ -23,6 +23,7 @@
 #include <asm/mach/pci.h>
 #include <asm/arch/cm-x270.h>
 #include <asm/arch/pxa-regs.h>
+#include <asm/arch/pxa2xx-gpio.h>
 #include <asm/mach-types.h>
 
 #include <asm/hardware/it8152.h>

arch/arm/mach-pxa/cm-x270.c

@@ -30,6 +30,7 @@
 
 #include <asm/arch/pxa-regs.h>
 #include <asm/arch/pxa2xx-regs.h>
+#include <asm/arch/pxa2xx-gpio.h>
 #include <asm/arch/pxafb.h>
 #include <asm/arch/ohci.h>
 #include <asm/arch/mmc.h>

arch/arm/mach-pxa/colibri.c

@@ -29,6 +29,7 @@
 #include <asm/mach/irq.h>
 #include <asm/mach/flash.h>
 #include <asm/arch/pxa-regs.h>
+#include <asm/arch/pxa2xx-gpio.h>
 #include <asm/arch/colibri.h>
 
 #include "generic.h"

arch/arm/mach-pxa/corgi.c

@@ -36,6 +36,7 @@
 #include <asm/mach/irq.h>
 
 #include <asm/arch/pxa-regs.h>
+#include <asm/arch/pxa2xx-gpio.h>
 #include <asm/arch/irda.h>
 #include <asm/arch/mmc.h>
 #include <asm/arch/udc.h>

arch/arm/mach-pxa/corgi_pm.c

@@ -26,6 +26,7 @@
 #include <asm/arch/sharpsl.h>
 #include <asm/arch/corgi.h>
 #include <asm/arch/pxa-regs.h>
+#include <asm/arch/pxa2xx-gpio.h>
 #include "sharpsl.h"
 
 #define SHARPSL_CHARGE_ON_VOLT         0x99  /* 2.9V */

arch/arm/mach-pxa/corgi_ssp.c

@@ -21,6 +21,7 @@
 
 #include <asm/arch/ssp.h>
 #include <asm/arch/pxa-regs.h>
+#include <asm/arch/pxa2xx-gpio.h>
 #include <asm/arch/regs-ssp.h>
 #include "sharpsl.h"
 

arch/arm/mach-pxa/em-x270.c

@@ -23,6 +23,7 @@
 #include <asm/mach/arch.h>
 
 #include <asm/arch/pxa-regs.h>
+#include <asm/arch/pxa2xx-gpio.h>
 #include <asm/arch/pxafb.h>
 #include <asm/arch/ohci.h>
 #include <asm/arch/mmc.h>

arch/arm/mach-pxa/gpio.c

@@ -21,6 +21,7 @@
 #include <asm/hardware.h>
 #include <asm/io.h>
 #include <asm/arch/pxa-regs.h>
+#include <asm/arch/pxa2xx-gpio.h>
 
 #include "generic.h"
 

arch/arm/mach-pxa/idp.c

@@ -32,6 +32,7 @@
 #include <asm/mach/map.h>
 
 #include <asm/arch/pxa-regs.h>
+#include <asm/arch/pxa2xx-gpio.h>
 #include <asm/arch/idp.h>
 #include <asm/arch/pxafb.h>
 #include <asm/arch/bitfield.h>

arch/arm/mach-pxa/irq.c

@@ -21,6 +21,7 @@
 #include <asm/irq.h>
 #include <asm/mach/irq.h>
 #include <asm/arch/pxa-regs.h>
+#include <asm/arch/pxa2xx-gpio.h>
 
 #include "generic.h"
 

arch/arm/mach-pxa/leds-trizeps4.c

@@ -18,6 +18,7 @@
 #include <asm/leds.h>
 
 #include <asm/arch/pxa-regs.h>
+#include <asm/arch/pxa2xx-gpio.h>
 #include <asm/arch/trizeps4.h>
 
 #include "leds.h"

arch/arm/mach-pxa/lpd270.c

@@ -39,6 +39,7 @@
 
 #include <asm/arch/pxa-regs.h>
 #include <asm/arch/pxa2xx-regs.h>
+#include <asm/arch/pxa2xx-gpio.h>
 #include <asm/arch/lpd270.h>
 #include <asm/arch/audio.h>
 #include <asm/arch/pxafb.h>

arch/arm/mach-pxa/lubbock.c

@@ -42,6 +42,7 @@
 
 #include <asm/arch/pxa-regs.h>
 #include <asm/arch/pxa2xx-regs.h>
+#include <asm/arch/pxa2xx-gpio.h>
 #include <asm/arch/lubbock.h>
 #include <asm/arch/udc.h>
 #include <asm/arch/irda.h>

arch/arm/mach-pxa/mainstone.c

@@ -40,6 +40,7 @@
 
 #include <asm/arch/pxa-regs.h>
 #include <asm/arch/pxa2xx-regs.h>
+#include <asm/arch/pxa2xx-gpio.h>
 #include <asm/arch/mainstone.h>
 #include <asm/arch/audio.h>
 #include <asm/arch/pxafb.h>

arch/arm/mach-pxa/pcm027.c

@@ -29,6 +29,7 @@
 #include <asm/mach/arch.h>
 #include <asm/arch/hardware.h>
 #include <asm/arch/pxa-regs.h>
+#include <asm/arch/pxa2xx-gpio.h>
 #include <asm/arch/pxa2xx-regs.h>
 #include <asm/arch/pxa2xx_spi.h>
 #include <asm/arch/pcm027.h>

arch/arm/mach-pxa/pcm990-baseboard.c

@@ -25,6 +25,7 @@
 #include <linux/ide.h>
 #include <asm/mach/map.h>
 #include <asm/arch/pxa-regs.h>
+#include <asm/arch/pxa2xx-gpio.h>
 #include <asm/arch/mmc.h>
 #include <asm/arch/ohci.h>
 #include <asm/arch/pcm990_baseboard.h>

arch/arm/mach-pxa/poodle.c

@@ -32,6 +32,7 @@
 #include <asm/mach/irq.h>
 
 #include <asm/arch/pxa-regs.h>
+#include <asm/arch/pxa2xx-gpio.h>
 #include <asm/arch/mmc.h>
 #include <asm/arch/udc.h>
 #include <asm/arch/irda.h>

arch/arm/mach-pxa/sharpsl_pm.c

@@ -26,6 +26,7 @@
 #include <asm/mach-types.h>
 #include <asm/arch/pm.h>
 #include <asm/arch/pxa-regs.h>
+#include <asm/arch/pxa2xx-gpio.h>
 #include <asm/arch/sharpsl.h>
 #include "sharpsl.h"
 

arch/arm/mach-pxa/spitz.c

@@ -37,6 +37,7 @@
 
 #include <asm/arch/pxa-regs.h>
 #include <asm/arch/pxa2xx-regs.h>
+#include <asm/arch/pxa2xx-gpio.h>
 #include <asm/arch/irda.h>
 #include <asm/arch/mmc.h>
 #include <asm/arch/ohci.h>

arch/arm/mach-pxa/spitz_pm.c

@@ -26,6 +26,7 @@
 #include <asm/arch/sharpsl.h>
 #include <asm/arch/spitz.h>
 #include <asm/arch/pxa-regs.h>
+#include <asm/arch/pxa2xx-gpio.h>
 #include "sharpsl.h"
 
 #define SHARPSL_CHARGE_ON_VOLT         0x99  /* 2.9V */

arch/arm/mach-pxa/tosa.c

@@ -32,6 +32,7 @@
 #include <asm/system.h>
 #include <asm/arch/pxa-regs.h>
 #include <asm/arch/pxa2xx-regs.h>
+#include <asm/arch/pxa2xx-gpio.h>
 #include <asm/arch/irda.h>
 #include <asm/arch/mmc.h>
 #include <asm/arch/udc.h>

arch/arm/mach-pxa/trizeps4.c

@@ -41,6 +41,7 @@
 #include <asm/mach/flash.h>
 
 #include <asm/arch/pxa-regs.h>
+#include <asm/arch/pxa2xx-gpio.h>
 #include <asm/arch/trizeps4.h>
 #include <asm/arch/audio.h>
 #include <asm/arch/pxafb.h>

drivers/i2c/busses/i2c-pxa.c

@@ -39,6 +39,7 @@
 #include <asm/io.h>
 #include <asm/arch/i2c.h>
 #include <asm/arch/pxa-regs.h>
+#include <asm/arch/pxa2xx-gpio.h>
 
 struct pxa_i2c {
 	spinlock_t		lock;

drivers/input/keyboard/corgikbd.c

@@ -23,6 +23,7 @@
 #include <asm/arch/corgi.h>
 #include <asm/arch/hardware.h>
 #include <asm/arch/pxa-regs.h>
+#include <asm/arch/pxa2xx-gpio.h>
 #include <asm/hardware/scoop.h>
 
 #define KB_ROWS				8

drivers/input/keyboard/spitzkbd.c

@@ -23,6 +23,7 @@
 #include <asm/arch/spitz.h>
 #include <asm/arch/hardware.h>
 #include <asm/arch/pxa-regs.h>
+#include <asm/arch/pxa2xx-gpio.h>
 
 #define KB_ROWS			7
 #define KB_COLS			11

drivers/input/touchscreen/corgi_ts.c

@@ -22,6 +22,7 @@
 #include <asm/arch/sharpsl.h>
 #include <asm/arch/hardware.h>
 #include <asm/arch/pxa-regs.h>
+#include <asm/arch/pxa2xx-gpio.h>
 
 
 #define PWR_MODE_ACTIVE		0

drivers/net/irda/pxaficp_ir.c

@@ -36,6 +36,7 @@
 #include <asm/hardware.h>
 #include <asm/arch/irda.h>
 #include <asm/arch/pxa-regs.h>
+#include <asm/arch/pxa2xx-gpio.h>
 
 #ifdef CONFIG_MACH_MAINSTONE
 #include <asm/arch/mainstone.h>

drivers/pcmcia/pxa2xx_cm_x270.c

@@ -20,6 +20,7 @@
 #include <asm/hardware.h>
 
 #include <asm/arch/pxa-regs.h>
+#include <asm/arch/pxa2xx-gpio.h>
 #include <asm/arch/cm-x270.h>
 
 #include "soc_common.h"

drivers/video/pxafb.c

@@ -45,6 +45,7 @@
 #include <asm/irq.h>
 #include <asm/div64.h>
 #include <asm/arch/pxa-regs.h>
+#include <asm/arch/pxa2xx-gpio.h>
 #include <asm/arch/bitfield.h>
 #include <asm/arch/pxafb.h>
 

sound/arm/pxa2xx-ac97.c

@@ -28,6 +28,7 @@
 #include <linux/mutex.h>
 #include <asm/hardware.h>
 #include <asm/arch/pxa-regs.h>
+#include <asm/arch/pxa2xx-gpio.h>
 #include <asm/arch/audio.h>
 
 #include "pxa2xx-pcm.h"

sound/soc/pxa/pxa2xx-ac97.c

@@ -28,6 +28,7 @@
 #include <linux/mutex.h>
 #include <asm/hardware.h>
 #include <asm/arch/pxa-regs.h>
+#include <asm/arch/pxa2xx-gpio.h>
 #include <asm/arch/audio.h>
 
 #include "pxa2xx-pcm.h"

sound/soc/pxa/pxa2xx-i2s.c

@@ -25,6 +25,7 @@
 
 #include <asm/hardware.h>
 #include <asm/arch/pxa-regs.h>
+#include <asm/arch/pxa2xx-gpio.h>
 #include <asm/arch/audio.h>
 
 #include "pxa2xx-pcm.h"