Commit a6dc7725 authored by Linus Torvalds's avatar Linus Torvalds

Merge branch 'dmaengine' of git://git.linaro.org/people/rmk/linux-arm

Pull ARM DMA engine updates from Russell King:
 "This looks scary at first glance, but what it is is:
   - a rework of the sa11x0 DMA engine driver merged during the previous
     cycle, to extract a common set of helper functions for DMA engine
     implementations.
   - conversion of amba-pl08x.c to use these helper functions.
   - addition of OMAP DMA engine driver (using these helper functions),
     and conversion of some of the OMAP DMA users to use DMA engine.

  Nothing in the helper functions is ARM specific, so I hope that other
  implementations can consolidate some of their code by making use of
  these helpers.

  This has been sitting in linux-next most of the merge cycle, and has
  been tested by several OMAP folk.  I've tested it on sa11x0 platforms,
  and given it my best shot on my broken platforms which have the
  amba-pl08x controller.

  The last point is the addition to feature-removal-schedule.txt, which
  will have a merge conflict.  Between myself and TI, we're planning to
  remove the old TI DMA implementation next year."

Fix up trivial add/add conflicts in Documentation/feature-removal-schedule.txt
and drivers/dma/{Kconfig,Makefile}

* 'dmaengine' of git://git.linaro.org/people/rmk/linux-arm: (53 commits)
  ARM: 7481/1: OMAP2+: omap2plus_defconfig: enable OMAP DMA engine
  ARM: 7464/1: mmc: omap_hsmmc: ensure probe returns error if DMA channel request fails
  Add feature removal of old OMAP private DMA implementation
  mtd: omap2: remove private DMA API implementation
  mtd: omap2: add DMA engine support
  spi: omap2-mcspi: remove private DMA API implementation
  spi: omap2-mcspi: add DMA engine support
  ARM: omap: remove mmc platform data dma_mask and initialization
  mmc: omap: remove private DMA API implementation
  mmc: omap: add DMA engine support
  mmc: omap_hsmmc: remove private DMA API implementation
  mmc: omap_hsmmc: add DMA engine support
  dmaengine: omap: add support for cyclic DMA
  dmaengine: omap: add support for setting fi
  dmaengine: omap: add support for returning residue in tx_state method
  dmaengine: add OMAP DMA engine driver
  dmaengine: sa11x0-dma: add cyclic DMA support
  dmaengine: sa11x0-dma: fix DMA residue support
  dmaengine: PL08x: ensure all descriptors are freed when channel is released
  dmaengine: PL08x: get rid of write only pool_ctr and free_txd locking
  ...
parents 02a6ec6a 0e52d987
......@@ -626,3 +626,14 @@ Why: New drivers should use new V4L2_CAP_VIDEO_M2M capability flag
Who: Sylwester Nawrocki <s.nawrocki@samsung.com>
----------------------------
What: OMAP private DMA implementation
When: 2013
Why: We have a DMA engine implementation; all users should be updated
to use this rather than persisting with the old APIs. The old APIs
block merging the old DMA engine implementation into the DMA
engine driver.
Who: Russell King <linux@arm.linux.org.uk>,
Santosh Shilimkar <santosh.shilimkar@ti.com>
----------------------------
......@@ -193,6 +193,8 @@ CONFIG_MMC_OMAP_HS=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_TWL92330=y
CONFIG_RTC_DRV_TWL4030=y
CONFIG_DMADEVICES=y
CONFIG_DMA_OMAP=y
CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
......
......@@ -54,7 +54,6 @@ static struct omap_mmc_platform_data mmc1_data = {
.nr_slots = 1,
.init = mmc_late_init,
.cleanup = mmc_cleanup,
.dma_mask = 0xffffffff,
.slots[0] = {
.set_power = mmc_set_power,
.ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
......
......@@ -36,7 +36,6 @@ static int mmc_set_power(struct device *dev, int slot, int power_on,
*/
static struct omap_mmc_platform_data mmc1_data = {
.nr_slots = 1,
.dma_mask = 0xffffffff,
.slots[0] = {
.set_power = mmc_set_power,
.ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
......
......@@ -185,7 +185,6 @@ static int nokia770_mmc_get_cover_state(struct device *dev, int slot)
static struct omap_mmc_platform_data nokia770_mmc2_data = {
.nr_slots = 1,
.dma_mask = 0xffffffff,
.max_freq = 12000000,
.slots[0] = {
.set_power = nokia770_mmc_set_power,
......
......@@ -468,7 +468,6 @@ static struct omap_mmc_platform_data mmc1_data = {
.cleanup = n8x0_mmc_cleanup,
.shutdown = n8x0_mmc_shutdown,
.max_freq = 24000000,
.dma_mask = 0xffffffff,
.slots[0] = {
.wires = 4,
.set_power = n8x0_mmc_set_power,
......
......@@ -315,7 +315,6 @@ static int __init omap_hsmmc_pdata_init(struct omap2_hsmmc_info *c,
mmc->slots[0].caps = c->caps;
mmc->slots[0].pm_caps = c->pm_caps;
mmc->slots[0].internal_clock = !c->ext_clock;
mmc->dma_mask = 0xffffffff;
mmc->max_freq = c->max_freq;
if (cpu_is_omap44xx())
mmc->reg_offset = OMAP4_MMC_REG_OFFSET;
......
......@@ -120,182 +120,156 @@ struct pl08x_channel_data spear300_dma_info[] = {
.min_signal = 2,
.max_signal = 2,
.muxval = 0,
.cctl = 0,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "uart0_tx",
.min_signal = 3,
.max_signal = 3,
.muxval = 0,
.cctl = 0,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "ssp0_rx",
.min_signal = 8,
.max_signal = 8,
.muxval = 0,
.cctl = 0,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "ssp0_tx",
.min_signal = 9,
.max_signal = 9,
.muxval = 0,
.cctl = 0,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "i2c_rx",
.min_signal = 10,
.max_signal = 10,
.muxval = 0,
.cctl = 0,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "i2c_tx",
.min_signal = 11,
.max_signal = 11,
.muxval = 0,
.cctl = 0,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "irda",
.min_signal = 12,
.max_signal = 12,
.muxval = 0,
.cctl = 0,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "adc",
.min_signal = 13,
.max_signal = 13,
.muxval = 0,
.cctl = 0,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "to_jpeg",
.min_signal = 14,
.max_signal = 14,
.muxval = 0,
.cctl = 0,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "from_jpeg",
.min_signal = 15,
.max_signal = 15,
.muxval = 0,
.cctl = 0,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "ras0_rx",
.min_signal = 0,
.max_signal = 0,
.muxval = 1,
.cctl = 0,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "ras0_tx",
.min_signal = 1,
.max_signal = 1,
.muxval = 1,
.cctl = 0,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "ras1_rx",
.min_signal = 2,
.max_signal = 2,
.muxval = 1,
.cctl = 0,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "ras1_tx",
.min_signal = 3,
.max_signal = 3,
.muxval = 1,
.cctl = 0,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "ras2_rx",
.min_signal = 4,
.max_signal = 4,
.muxval = 1,
.cctl = 0,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "ras2_tx",
.min_signal = 5,
.max_signal = 5,
.muxval = 1,
.cctl = 0,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "ras3_rx",
.min_signal = 6,
.max_signal = 6,
.muxval = 1,
.cctl = 0,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "ras3_tx",
.min_signal = 7,
.max_signal = 7,
.muxval = 1,
.cctl = 0,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "ras4_rx",
.min_signal = 8,
.max_signal = 8,
.muxval = 1,
.cctl = 0,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "ras4_tx",
.min_signal = 9,
.max_signal = 9,
.muxval = 1,
.cctl = 0,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "ras5_rx",
.min_signal = 10,
.max_signal = 10,
.muxval = 1,
.cctl = 0,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "ras5_tx",
.min_signal = 11,
.max_signal = 11,
.muxval = 1,
.cctl = 0,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "ras6_rx",
.min_signal = 12,
.max_signal = 12,
.muxval = 1,
.cctl = 0,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "ras6_tx",
.min_signal = 13,
.max_signal = 13,
.muxval = 1,
.cctl = 0,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "ras7_rx",
.min_signal = 14,
.max_signal = 14,
.muxval = 1,
.cctl = 0,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "ras7_tx",
.min_signal = 15,
.max_signal = 15,
.muxval = 1,
.cctl = 0,
.periph_buses = PL08X_AHB1,
},
};
......
......@@ -205,182 +205,156 @@ struct pl08x_channel_data spear310_dma_info[] = {
.min_signal = 2,
.max_signal = 2,
.muxval = 0,
.cctl = 0,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "uart0_tx",
.min_signal = 3,
.max_signal = 3,
.muxval = 0,
.cctl = 0,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "ssp0_rx",
.min_signal = 8,
.max_signal = 8,
.muxval = 0,
.cctl = 0,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "ssp0_tx",
.min_signal = 9,
.max_signal = 9,
.muxval = 0,
.cctl = 0,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "i2c_rx",
.min_signal = 10,
.max_signal = 10,
.muxval = 0,
.cctl = 0,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "i2c_tx",
.min_signal = 11,
.max_signal = 11,
.muxval = 0,
.cctl = 0,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "irda",
.min_signal = 12,
.max_signal = 12,
.muxval = 0,
.cctl = 0,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "adc",
.min_signal = 13,
.max_signal = 13,
.muxval = 0,
.cctl = 0,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "to_jpeg",
.min_signal = 14,
.max_signal = 14,
.muxval = 0,
.cctl = 0,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "from_jpeg",
.min_signal = 15,
.max_signal = 15,
.muxval = 0,
.cctl = 0,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "uart1_rx",
.min_signal = 0,
.max_signal = 0,
.muxval = 1,
.cctl = 0,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "uart1_tx",
.min_signal = 1,
.max_signal = 1,
.muxval = 1,
.cctl = 0,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "uart2_rx",
.min_signal = 2,
.max_signal = 2,
.muxval = 1,
.cctl = 0,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "uart2_tx",
.min_signal = 3,
.max_signal = 3,
.muxval = 1,
.cctl = 0,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "uart3_rx",
.min_signal = 4,
.max_signal = 4,
.muxval = 1,
.cctl = 0,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "uart3_tx",
.min_signal = 5,
.max_signal = 5,
.muxval = 1,
.cctl = 0,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "uart4_rx",
.min_signal = 6,
.max_signal = 6,
.muxval = 1,
.cctl = 0,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "uart4_tx",
.min_signal = 7,
.max_signal = 7,
.muxval = 1,
.cctl = 0,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "uart5_rx",
.min_signal = 8,
.max_signal = 8,
.muxval = 1,
.cctl = 0,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "uart5_tx",
.min_signal = 9,
.max_signal = 9,
.muxval = 1,
.cctl = 0,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "ras5_rx",
.min_signal = 10,
.max_signal = 10,
.muxval = 1,
.cctl = 0,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "ras5_tx",
.min_signal = 11,
.max_signal = 11,
.muxval = 1,
.cctl = 0,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "ras6_rx",
.min_signal = 12,
.max_signal = 12,
.muxval = 1,
.cctl = 0,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "ras6_tx",
.min_signal = 13,
.max_signal = 13,
.muxval = 1,
.cctl = 0,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "ras7_rx",
.min_signal = 14,
.max_signal = 14,
.muxval = 1,
.cctl = 0,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "ras7_tx",
.min_signal = 15,
.max_signal = 15,
.muxval = 1,
.cctl = 0,
.periph_buses = PL08X_AHB1,
},
};
......
......@@ -213,182 +213,156 @@ struct pl08x_channel_data spear320_dma_info[] = {
.min_signal = 2,
.max_signal = 2,
.muxval = 0,
.cctl = 0,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "uart0_tx",
.min_signal = 3,
.max_signal = 3,
.muxval = 0,
.cctl = 0,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "ssp0_rx",
.min_signal = 8,
.max_signal = 8,
.muxval = 0,
.cctl = 0,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "ssp0_tx",
.min_signal = 9,
.max_signal = 9,
.muxval = 0,
.cctl = 0,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "i2c0_rx",
.min_signal = 10,
.max_signal = 10,
.muxval = 0,
.cctl = 0,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "i2c0_tx",
.min_signal = 11,
.max_signal = 11,
.muxval = 0,
.cctl = 0,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "irda",
.min_signal = 12,
.max_signal = 12,
.muxval = 0,
.cctl = 0,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "adc",
.min_signal = 13,
.max_signal = 13,
.muxval = 0,
.cctl = 0,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "to_jpeg",
.min_signal = 14,
.max_signal = 14,
.muxval = 0,
.cctl = 0,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "from_jpeg",
.min_signal = 15,
.max_signal = 15,
.muxval = 0,
.cctl = 0,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "ssp1_rx",
.min_signal = 0,
.max_signal = 0,
.muxval = 1,
.cctl = 0,
.periph_buses = PL08X_AHB2,
}, {
.bus_id = "ssp1_tx",
.min_signal = 1,
.max_signal = 1,
.muxval = 1,
.cctl = 0,
.periph_buses = PL08X_AHB2,
}, {
.bus_id = "ssp2_rx",
.min_signal = 2,
.max_signal = 2,
.muxval = 1,
.cctl = 0,
.periph_buses = PL08X_AHB2,
}, {
.bus_id = "ssp2_tx",
.min_signal = 3,
.max_signal = 3,
.muxval = 1,
.cctl = 0,
.periph_buses = PL08X_AHB2,
}, {
.bus_id = "uart1_rx",
.min_signal = 4,
.max_signal = 4,
.muxval = 1,
.cctl = 0,
.periph_buses = PL08X_AHB2,
}, {
.bus_id = "uart1_tx",
.min_signal = 5,
.max_signal = 5,
.muxval = 1,
.cctl = 0,
.periph_buses = PL08X_AHB2,
}, {
.bus_id = "uart2_rx",
.min_signal = 6,
.max_signal = 6,
.muxval = 1,
.cctl = 0,
.periph_buses = PL08X_AHB2,
}, {
.bus_id = "uart2_tx",
.min_signal = 7,
.max_signal = 7,
.muxval = 1,
.cctl = 0,
.periph_buses = PL08X_AHB2,
}, {
.bus_id = "i2c1_rx",
.min_signal = 8,
.max_signal = 8,
.muxval = 1,
.cctl = 0,
.periph_buses = PL08X_AHB2,
}, {
.bus_id = "i2c1_tx",
.min_signal = 9,
.max_signal = 9,
.muxval = 1,
.cctl = 0,
.periph_buses = PL08X_AHB2,
}, {
.bus_id = "i2c2_rx",
.min_signal = 10,
.max_signal = 10,
.muxval = 1,
.cctl = 0,
.periph_buses = PL08X_AHB2,
}, {
.bus_id = "i2c2_tx",
.min_signal = 11,
.max_signal = 11,
.muxval = 1,
.cctl = 0,
.periph_buses = PL08X_AHB2,
}, {
.bus_id = "i2s_rx",
.min_signal = 12,
.max_signal = 12,
.muxval = 1,
.cctl = 0,
.periph_buses = PL08X_AHB2,
}, {
.bus_id = "i2s_tx",
.min_signal = 13,
.max_signal = 13,
.muxval = 1,
.cctl = 0,
.periph_buses = PL08X_AHB2,
}, {
.bus_id = "rs485_rx",
.min_signal = 14,
.max_signal = 14,
.muxval = 1,
.cctl = 0,
.periph_buses = PL08X_AHB2,
}, {
.bus_id = "rs485_tx",
.min_signal = 15,
.max_signal = 15,
.muxval = 1,
.cctl = 0,
.periph_buses = PL08X_AHB2,
},
};
......
......@@ -46,7 +46,8 @@ struct pl022_ssp_controller pl022_plat_data = {
struct pl08x_platform_data pl080_plat_data = {
.memcpy_channel = {
.bus_id = "memcpy",
.cctl = (PL080_BSIZE_16 << PL080_CONTROL_SB_SIZE_SHIFT | \
.cctl_memcpy =
(PL080_BSIZE_16 << PL080_CONTROL_SB_SIZE_SHIFT | \
PL080_BSIZE_16 << PL080_CONTROL_DB_SIZE_SHIFT | \
PL080_WIDTH_32BIT << PL080_CONTROL_SWIDTH_SHIFT | \
PL080_WIDTH_32BIT << PL080_CONTROL_DWIDTH_SHIFT | \
......
......@@ -36,336 +36,288 @@ static struct pl08x_channel_data spear600_dma_info[] = {
.min_signal = 0,
.max_signal = 0,
.muxval = 0,
.cctl = 0,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "ssp1_tx",
.min_signal = 1,
.max_signal = 1,
.muxval = 0,
.cctl = 0,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "uart0_rx",
.min_signal = 2,
.max_signal = 2,
.muxval = 0,
.cctl = 0,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "uart0_tx",
.min_signal = 3,
.max_signal = 3,
.muxval = 0,
.cctl = 0,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "uart1_rx",
.min_signal = 4,
.max_signal = 4,
.muxval = 0,
.cctl = 0,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "uart1_tx",
.min_signal = 5,
.max_signal = 5,
.muxval = 0,
.cctl = 0,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "ssp2_rx",
.min_signal = 6,
.max_signal = 6,
.muxval = 0,
.cctl = 0,
.periph_buses = PL08X_AHB2,
}, {
.bus_id = "ssp2_tx",
.min_signal = 7,
.max_signal = 7,
.muxval = 0,
.cctl = 0,
.periph_buses = PL08X_AHB2,
}, {
.bus_id = "ssp0_rx",
.min_signal = 8,
.max_signal = 8,
.muxval = 0,
.cctl = 0,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "ssp0_tx",
.min_signal = 9,
.max_signal = 9,
.muxval = 0,
.cctl = 0,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "i2c_rx",
.min_signal = 10,
.max_signal = 10,
.muxval = 0,
.cctl = 0,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "i2c_tx",
.min_signal = 11,
.max_signal = 11,
.muxval = 0,
.cctl = 0,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "irda",
.min_signal = 12,
.max_signal = 12,
.muxval = 0,
.cctl = 0,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "adc",
.min_signal = 13,
.max_signal = 13,
.muxval = 0,
.cctl = 0,
.periph_buses = PL08X_AHB2,
}, {
.bus_id = "to_jpeg",
.min_signal = 14,
.max_signal = 14,
.muxval = 0,
.cctl = 0,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "from_jpeg",
.min_signal = 15,
.max_signal = 15,
.muxval = 0,
.cctl = 0,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "ras0_rx",
.min_signal = 0,
.max_signal = 0,
.muxval = 1,
.cctl = 0,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "ras0_tx",
.min_signal = 1,
.max_signal = 1,
.muxval = 1,
.cctl = 0,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "ras1_rx",
.min_signal = 2,
.max_signal = 2,
.muxval = 1,
.cctl = 0,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "ras1_tx",
.min_signal = 3,
.max_signal = 3,
.muxval = 1,
.cctl = 0,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "ras2_rx",
.min_signal = 4,
.max_signal = 4,
.muxval = 1,
.cctl = 0,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "ras2_tx",
.min_signal = 5,
.max_signal = 5,
.muxval = 1,
.cctl = 0,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "ras3_rx",
.min_signal = 6,
.max_signal = 6,
.muxval = 1,
.cctl = 0,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "ras3_tx",
.min_signal = 7,
.max_signal = 7,
.muxval = 1,
.cctl = 0,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "ras4_rx",
.min_signal = 8,
.max_signal = 8,
.muxval = 1,
.cctl = 0,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "ras4_tx",
.min_signal = 9,
.max_signal = 9,
.muxval = 1,
.cctl = 0,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "ras5_rx",
.min_signal = 10,
.max_signal = 10,
.muxval = 1,
.cctl = 0,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "ras5_tx",
.min_signal = 11,
.max_signal = 11,
.muxval = 1,
.cctl = 0,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "ras6_rx",
.min_signal = 12,
.max_signal = 12,
.muxval = 1,
.cctl = 0,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "ras6_tx",
.min_signal = 13,
.max_signal = 13,
.muxval = 1,
.cctl = 0,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "ras7_rx",
.min_signal = 14,
.max_signal = 14,
.muxval = 1,
.cctl = 0,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "ras7_tx",
.min_signal = 15,
.max_signal = 15,
.muxval = 1,
.cctl = 0,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "ext0_rx",
.min_signal = 0,
.max_signal = 0,
.muxval = 2,
.cctl = 0,
.periph_buses = PL08X_AHB2,
}, {
.bus_id = "ext0_tx",
.min_signal = 1,
.max_signal = 1,
.muxval = 2,
.cctl = 0,
.periph_buses = PL08X_AHB2,
}, {
.bus_id = "ext1_rx",
.min_signal = 2,
.max_signal = 2,
.muxval = 2,
.cctl = 0,
.periph_buses = PL08X_AHB2,
}, {
.bus_id = "ext1_tx",
.min_signal = 3,
.max_signal = 3,
.muxval = 2,
.cctl = 0,
.periph_buses = PL08X_AHB2,
}, {
.bus_id = "ext2_rx",
.min_signal = 4,
.max_signal = 4,
.muxval = 2,
.cctl = 0,
.periph_buses = PL08X_AHB2,
}, {
.bus_id = "ext2_tx",
.min_signal = 5,
.max_signal = 5,
.muxval = 2,
.cctl = 0,
.periph_buses = PL08X_AHB2,
}, {
.bus_id = "ext3_rx",
.min_signal = 6,
.max_signal = 6,
.muxval = 2,
.cctl = 0,
.periph_buses = PL08X_AHB2,
}, {
.bus_id = "ext3_tx",
.min_signal = 7,
.max_signal = 7,
.muxval = 2,
.cctl = 0,
.periph_buses = PL08X_AHB2,
}, {
.bus_id = "ext4_rx",
.min_signal = 8,
.max_signal = 8,
.muxval = 2,
.cctl = 0,
.periph_buses = PL08X_AHB2,
}, {
.bus_id = "ext4_tx",
.min_signal = 9,
.max_signal = 9,
.muxval = 2,
.cctl = 0,
.periph_buses = PL08X_AHB2,
}, {
.bus_id = "ext5_rx",
.min_signal = 10,
.max_signal = 10,
.muxval = 2,
.cctl = 0,
.periph_buses = PL08X_AHB2,
}, {
.bus_id = "ext5_tx",
.min_signal = 11,
.max_signal = 11,
.muxval = 2,
.cctl = 0,
.periph_buses = PL08X_AHB2,
}, {
.bus_id = "ext6_rx",
.min_signal = 12,
.max_signal = 12,
.muxval = 2,
.cctl = 0,
.periph_buses = PL08X_AHB2,
}, {
.bus_id = "ext6_tx",
.min_signal = 13,
.max_signal = 13,
.muxval = 2,
.cctl = 0,
.periph_buses = PL08X_AHB2,
}, {
.bus_id = "ext7_rx",
.min_signal = 14,
.max_signal = 14,
.muxval = 2,
.cctl = 0,
.periph_buses = PL08X_AHB2,
}, {
.bus_id = "ext7_tx",
.min_signal = 15,
.max_signal = 15,
.muxval = 2,
.cctl = 0,
.periph_buses = PL08X_AHB2,
},
};
......@@ -373,7 +325,8 @@ static struct pl08x_channel_data spear600_dma_info[] = {
struct pl08x_platform_data pl080_plat_data = {
.memcpy_channel = {
.bus_id = "memcpy",
.cctl = (PL080_BSIZE_16 << PL080_CONTROL_SB_SIZE_SHIFT | \
.cctl_memcpy =
(PL080_BSIZE_16 << PL080_CONTROL_SB_SIZE_SHIFT | \
PL080_BSIZE_16 << PL080_CONTROL_DB_SIZE_SHIFT | \
PL080_WIDTH_32BIT << PL080_CONTROL_SWIDTH_SHIFT | \
PL080_WIDTH_32BIT << PL080_CONTROL_DWIDTH_SHIFT | \
......
......@@ -81,8 +81,6 @@ struct omap_mmc_platform_data {
/* Return context loss count due to PM states changing */
int (*get_context_loss_count)(struct device *dev);
u64 dma_mask;
/* Integrating attributes from the omap_hwmod layer */
u8 controller_flags;
......
......@@ -14,8 +14,8 @@
#ifndef __PLAT_PL080_H
#define __PLAT_PL080_H
struct pl08x_dma_chan;
int pl080_get_signal(struct pl08x_dma_chan *ch);
void pl080_put_signal(struct pl08x_dma_chan *ch);
struct pl08x_channel_data;
int pl080_get_signal(const struct pl08x_channel_data *cd);
void pl080_put_signal(const struct pl08x_channel_data *cd, int signal);
#endif /* __PLAT_PL080_H */
......@@ -27,9 +27,8 @@ struct {
unsigned char val;
} signals[16] = {{0, 0}, };
int pl080_get_signal(struct pl08x_dma_chan *ch)
int pl080_get_signal(const struct pl08x_channel_data *cd)
{
const struct pl08x_channel_data *cd = ch->cd;
unsigned int signal = cd->min_signal, val;
unsigned long flags;
......@@ -63,18 +62,17 @@ int pl080_get_signal(struct pl08x_dma_chan *ch)
return signal;
}
void pl080_put_signal(struct pl08x_dma_chan *ch)
void pl080_put_signal(const struct pl08x_channel_data *cd, int signal)
{
const struct pl08x_channel_data *cd = ch->cd;
unsigned long flags;
spin_lock_irqsave(&lock, flags);
/* if signal is not used */
if (!signals[cd->min_signal].busy)
if (!signals[signal].busy)
BUG();
signals[cd->min_signal].busy--;
signals[signal].busy--;
spin_unlock_irqrestore(&lock, flags);
}
......@@ -53,6 +53,7 @@ config AMBA_PL08X
bool "ARM PrimeCell PL080 or PL081 support"
depends on ARM_AMBA && EXPERIMENTAL
select DMA_ENGINE
select DMA_VIRTUAL_CHANNELS
help
Platform has a PL08x DMAC device
which can provide DMA engine support
......@@ -269,6 +270,7 @@ config DMA_SA11X0
tristate "SA-11x0 DMA support"
depends on ARCH_SA1100
select DMA_ENGINE
select DMA_VIRTUAL_CHANNELS
help
Support the DMA engine found on Intel StrongARM SA-1100 and
SA-1110 SoCs. This DMA engine can only be used with on-chip
......@@ -284,9 +286,18 @@ config MMP_TDMA
Say Y here if you enabled MMP ADMA, otherwise say N.
config DMA_OMAP
tristate "OMAP DMA support"
depends on ARCH_OMAP
select DMA_ENGINE
select DMA_VIRTUAL_CHANNELS
config DMA_ENGINE
bool
config DMA_VIRTUAL_CHANNELS
tristate
comment "DMA Clients"
depends on DMA_ENGINE
......
......@@ -2,6 +2,7 @@ ccflags-$(CONFIG_DMADEVICES_DEBUG) := -DDEBUG
ccflags-$(CONFIG_DMADEVICES_VDEBUG) += -DVERBOSE_DEBUG
obj-$(CONFIG_DMA_ENGINE) += dmaengine.o
obj-$(CONFIG_DMA_VIRTUAL_CHANNELS) += virt-dma.o
obj-$(CONFIG_NET_DMA) += iovlock.o
obj-$(CONFIG_INTEL_MID_DMAC) += intel_mid_dma.o
obj-$(CONFIG_DMATEST) += dmatest.o
......@@ -30,3 +31,4 @@ obj-$(CONFIG_AMBA_PL08X) += amba-pl08x.o
obj-$(CONFIG_EP93XX_DMA) += ep93xx_dma.o
obj-$(CONFIG_DMA_SA11X0) += sa11x0-dma.o
obj-$(CONFIG_MMP_TDMA) += mmp_tdma.o
obj-$(CONFIG_DMA_OMAP) += omap-dma.o
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
/*
* Virtual DMA channel support for DMAengine
*
* Copyright (C) 2012 Russell King
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/device.h>
#include <linux/dmaengine.h>
#include <linux/module.h>
#include <linux/spinlock.h>
#include "virt-dma.h"
static struct virt_dma_desc *to_virt_desc(struct dma_async_tx_descriptor *tx)
{
return container_of(tx, struct virt_dma_desc, tx);
}
dma_cookie_t vchan_tx_submit(struct dma_async_tx_descriptor *tx)
{
struct virt_dma_chan *vc = to_virt_chan(tx->chan);
struct virt_dma_desc *vd = to_virt_desc(tx);
unsigned long flags;
dma_cookie_t cookie;
spin_lock_irqsave(&vc->lock, flags);
cookie = dma_cookie_assign(tx);
list_add_tail(&vd->node, &vc->desc_submitted);
spin_unlock_irqrestore(&vc->lock, flags);
dev_dbg(vc->chan.device->dev, "vchan %p: txd %p[%x]: submitted\n",
vc, vd, cookie);
return cookie;
}
EXPORT_SYMBOL_GPL(vchan_tx_submit);
struct virt_dma_desc *vchan_find_desc(struct virt_dma_chan *vc,
dma_cookie_t cookie)
{
struct virt_dma_desc *vd;
list_for_each_entry(vd, &vc->desc_issued, node)
if (vd->tx.cookie == cookie)
return vd;
return NULL;
}
EXPORT_SYMBOL_GPL(vchan_find_desc);
/*
* This tasklet handles the completion of a DMA descriptor by
* calling its callback and freeing it.
*/
static void vchan_complete(unsigned long arg)
{
struct virt_dma_chan *vc = (struct virt_dma_chan *)arg;
struct virt_dma_desc *vd;
dma_async_tx_callback cb = NULL;
void *cb_data = NULL;
LIST_HEAD(head);
spin_lock_irq(&vc->lock);
list_splice_tail_init(&vc->desc_completed, &head);
vd = vc->cyclic;
if (vd) {
vc->cyclic = NULL;
cb = vd->tx.callback;
cb_data = vd->tx.callback_param;
}
spin_unlock_irq(&vc->lock);
if (cb)
cb(cb_data);
while (!list_empty(&head)) {
vd = list_first_entry(&head, struct virt_dma_desc, node);
cb = vd->tx.callback;
cb_data = vd->tx.callback_param;
list_del(&vd->node);
vc->desc_free(vd);
if (cb)
cb(cb_data);
}
}
void vchan_dma_desc_free_list(struct virt_dma_chan *vc, struct list_head *head)
{
while (!list_empty(head)) {
struct virt_dma_desc *vd = list_first_entry(head,
struct virt_dma_desc, node);
list_del(&vd->node);
dev_dbg(vc->chan.device->dev, "txd %p: freeing\n", vd);
vc->desc_free(vd);
}
}
EXPORT_SYMBOL_GPL(vchan_dma_desc_free_list);
void vchan_init(struct virt_dma_chan *vc, struct dma_device *dmadev)
{
dma_cookie_init(&vc->chan);
spin_lock_init(&vc->lock);
INIT_LIST_HEAD(&vc->desc_submitted);
INIT_LIST_HEAD(&vc->desc_issued);
INIT_LIST_HEAD(&vc->desc_completed);
tasklet_init(&vc->task, vchan_complete, (unsigned long)vc);
vc->chan.device = dmadev;
list_add_tail(&vc->chan.device_node, &dmadev->channels);
}
EXPORT_SYMBOL_GPL(vchan_init);
MODULE_AUTHOR("Russell King");
MODULE_LICENSE("GPL");
/*
* Virtual DMA channel support for DMAengine
*
* Copyright (C) 2012 Russell King
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef VIRT_DMA_H
#define VIRT_DMA_H
#include <linux/dmaengine.h>
#include <linux/interrupt.h>
#include "dmaengine.h"
struct virt_dma_desc {
struct dma_async_tx_descriptor tx;
/* protected by vc.lock */
struct list_head node;
};
struct virt_dma_chan {
struct dma_chan chan;
struct tasklet_struct task;
void (*desc_free)(struct virt_dma_desc *);
spinlock_t lock;
/* protected by vc.lock */
struct list_head desc_submitted;
struct list_head desc_issued;
struct list_head desc_completed;
struct virt_dma_desc *cyclic;
};
static inline struct virt_dma_chan *to_virt_chan(struct dma_chan *chan)
{
return container_of(chan, struct virt_dma_chan, chan);
}
void vchan_dma_desc_free_list(struct virt_dma_chan *vc, struct list_head *head);
void vchan_init(struct virt_dma_chan *vc, struct dma_device *dmadev);
struct virt_dma_desc *vchan_find_desc(struct virt_dma_chan *, dma_cookie_t);
/**
* vchan_tx_prep - prepare a descriptor
* vc: virtual channel allocating this descriptor
* vd: virtual descriptor to prepare
* tx_flags: flags argument passed in to prepare function
*/
static inline struct dma_async_tx_descriptor *vchan_tx_prep(struct virt_dma_chan *vc,
struct virt_dma_desc *vd, unsigned long tx_flags)
{
extern dma_cookie_t vchan_tx_submit(struct dma_async_tx_descriptor *);
dma_async_tx_descriptor_init(&vd->tx, &vc->chan);
vd->tx.flags = tx_flags;
vd->tx.tx_submit = vchan_tx_submit;
return &vd->tx;
}
/**
* vchan_issue_pending - move submitted descriptors to issued list
* vc: virtual channel to update
*
* vc.lock must be held by caller
*/
static inline bool vchan_issue_pending(struct virt_dma_chan *vc)
{
list_splice_tail_init(&vc->desc_submitted, &vc->desc_issued);
return !list_empty(&vc->desc_issued);
}
/**
* vchan_cookie_complete - report completion of a descriptor
* vd: virtual descriptor to update
*
* vc.lock must be held by caller
*/
static inline void vchan_cookie_complete(struct virt_dma_desc *vd)
{
struct virt_dma_chan *vc = to_virt_chan(vd->tx.chan);
dma_cookie_complete(&vd->tx);
dev_vdbg(vc->chan.device->dev, "txd %p[%x]: marked complete\n",
vd, vd->tx.cookie);
list_add_tail(&vd->node, &vc->desc_completed);
tasklet_schedule(&vc->task);
}
/**
* vchan_cyclic_callback - report the completion of a period
* vd: virtual descriptor
*/
static inline void vchan_cyclic_callback(struct virt_dma_desc *vd)
{
struct virt_dma_chan *vc = to_virt_chan(vd->tx.chan);
vc->cyclic = vd;
tasklet_schedule(&vc->task);
}
/**
* vchan_next_desc - peek at the next descriptor to be processed
* vc: virtual channel to obtain descriptor from
*
* vc.lock must be held by caller
*/
static inline struct virt_dma_desc *vchan_next_desc(struct virt_dma_chan *vc)
{
if (list_empty(&vc->desc_issued))
return NULL;
return list_first_entry(&vc->desc_issued, struct virt_dma_desc, node);
}
/**
* vchan_get_all_descriptors - obtain all submitted and issued descriptors
* vc: virtual channel to get descriptors from
* head: list of descriptors found
*
* vc.lock must be held by caller
*
* Removes all submitted and issued descriptors from internal lists, and
* provides a list of all descriptors found
*/
static inline void vchan_get_all_descriptors(struct virt_dma_chan *vc,
struct list_head *head)
{
list_splice_tail_init(&vc->desc_submitted, head);
list_splice_tail_init(&vc->desc_issued, head);
list_splice_tail_init(&vc->desc_completed, head);
}
static inline void vchan_free_chan_resources(struct virt_dma_chan *vc)
{
unsigned long flags;
LIST_HEAD(head);
spin_lock_irqsave(&vc->lock, flags);
vchan_get_all_descriptors(vc, &head);
spin_unlock_irqrestore(&vc->lock, flags);
vchan_dma_desc_free_list(vc, &head);
}
#endif
This diff is collapsed.
This diff is collapsed.
......@@ -9,6 +9,7 @@
*/
#include <linux/platform_device.h>
#include <linux/dmaengine.h>
#include <linux/dma-mapping.h>
#include <linux/delay.h>
#include <linux/module.h>
......@@ -18,6 +19,7 @@
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
#include <linux/omap-dma.h>
#include <linux/io.h>
#include <linux/slab.h>
......@@ -123,7 +125,7 @@ struct omap_nand_info {
int gpmc_cs;
unsigned long phys_base;
struct completion comp;
int dma_ch;
struct dma_chan *dma;
int gpmc_irq;
enum {
OMAP_NAND_IO_READ = 0, /* read */
......@@ -336,12 +338,10 @@ static void omap_write_buf_pref(struct mtd_info *mtd,
}
/*
* omap_nand_dma_cb: callback on the completion of dma transfer
* @lch: logical channel
* @ch_satuts: channel status
* omap_nand_dma_callback: callback on the completion of dma transfer
* @data: pointer to completion data structure
*/
static void omap_nand_dma_cb(int lch, u16 ch_status, void *data)
static void omap_nand_dma_callback(void *data)
{
complete((struct completion *) data);
}
......@@ -358,17 +358,13 @@ static inline int omap_nand_dma_transfer(struct mtd_info *mtd, void *addr,
{
struct omap_nand_info *info = container_of(mtd,
struct omap_nand_info, mtd);
struct dma_async_tx_descriptor *tx;
enum dma_data_direction dir = is_write ? DMA_TO_DEVICE :
DMA_FROM_DEVICE;
dma_addr_t dma_addr;
int ret;
struct scatterlist sg;
unsigned long tim, limit;
/* The fifo depth is 64 bytes max.
* But configure the FIFO-threahold to 32 to get a sync at each frame
* and frame length is 32 bytes.
*/
int buf_len = len >> 6;
unsigned n;
int ret;
if (addr >= high_memory) {
struct page *p1;
......@@ -382,30 +378,24 @@ static inline int omap_nand_dma_transfer(struct mtd_info *mtd, void *addr,
addr = page_address(p1) + ((size_t)addr & ~PAGE_MASK);
}
dma_addr = dma_map_single(&info->pdev->dev, addr, len, dir);
if (dma_mapping_error(&info->pdev->dev, dma_addr)) {
sg_init_one(&sg, addr, len);
n = dma_map_sg(info->dma->device->dev, &sg, 1, dir);
if (n == 0) {
dev_err(&info->pdev->dev,
"Couldn't DMA map a %d byte buffer\n", len);
goto out_copy;
}
if (is_write) {
omap_set_dma_dest_params(info->dma_ch, 0, OMAP_DMA_AMODE_CONSTANT,
info->phys_base, 0, 0);
omap_set_dma_src_params(info->dma_ch, 0, OMAP_DMA_AMODE_POST_INC,
dma_addr, 0, 0);
omap_set_dma_transfer_params(info->dma_ch, OMAP_DMA_DATA_TYPE_S32,
0x10, buf_len, OMAP_DMA_SYNC_FRAME,
OMAP24XX_DMA_GPMC, OMAP_DMA_DST_SYNC);
} else {
omap_set_dma_src_params(info->dma_ch, 0, OMAP_DMA_AMODE_CONSTANT,
info->phys_base, 0, 0);
omap_set_dma_dest_params(info->dma_ch, 0, OMAP_DMA_AMODE_POST_INC,
dma_addr, 0, 0);
omap_set_dma_transfer_params(info->dma_ch, OMAP_DMA_DATA_TYPE_S32,
0x10, buf_len, OMAP_DMA_SYNC_FRAME,
OMAP24XX_DMA_GPMC, OMAP_DMA_SRC_SYNC);
}
tx = dmaengine_prep_slave_sg(info->dma, &sg, n,
is_write ? DMA_MEM_TO_DEV : DMA_DEV_TO_MEM,
DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
if (!tx)
goto out_copy_unmap;
tx->callback = omap_nand_dma_callback;
tx->callback_param = &info->comp;
dmaengine_submit(tx);
/* configure and start prefetch transfer */
ret = gpmc_prefetch_enable(info->gpmc_cs,
PREFETCH_FIFOTHRESHOLD_MAX, 0x1, len, is_write);
......@@ -414,8 +404,7 @@ static inline int omap_nand_dma_transfer(struct mtd_info *mtd, void *addr,
goto out_copy_unmap;
init_completion(&info->comp);
omap_start_dma(info->dma_ch);
dma_async_issue_pending(info->dma);
/* setup and start DMA using dma_addr */
wait_for_completion(&info->comp);
......@@ -427,11 +416,11 @@ static inline int omap_nand_dma_transfer(struct mtd_info *mtd, void *addr,
/* disable and stop the PFPW engine */
gpmc_prefetch_reset(info->gpmc_cs);
dma_unmap_single(&info->pdev->dev, dma_addr, len, dir);
dma_unmap_sg(info->dma->device->dev, &sg, 1, dir);
return 0;
out_copy_unmap:
dma_unmap_single(&info->pdev->dev, dma_addr, len, dir);
dma_unmap_sg(info->dma->device->dev, &sg, 1, dir);
out_copy:
if (info->nand.options & NAND_BUSWIDTH_16)
is_write == 0 ? omap_read_buf16(mtd, (u_char *) addr, len)
......@@ -1164,6 +1153,8 @@ static int __devinit omap_nand_probe(struct platform_device *pdev)
struct omap_nand_platform_data *pdata;
int err;
int i, offset;
dma_cap_mask_t mask;
unsigned sig;
pdata = pdev->dev.platform_data;
if (pdata == NULL) {
......@@ -1244,18 +1235,31 @@ static int __devinit omap_nand_probe(struct platform_device *pdev)
break;
case NAND_OMAP_PREFETCH_DMA:
err = omap_request_dma(OMAP24XX_DMA_GPMC, "NAND",
omap_nand_dma_cb, &info->comp, &info->dma_ch);
if (err < 0) {
info->dma_ch = -1;
dev_err(&pdev->dev, "DMA request failed!\n");
dma_cap_zero(mask);
dma_cap_set(DMA_SLAVE, mask);
sig = OMAP24XX_DMA_GPMC;
info->dma = dma_request_channel(mask, omap_dma_filter_fn, &sig);
if (!info->dma) {
dev_err(&pdev->dev, "DMA engine request failed\n");
err = -ENXIO;
goto out_release_mem_region;
} else {
omap_set_dma_dest_burst_mode(info->dma_ch,
OMAP_DMA_DATA_BURST_16);
omap_set_dma_src_burst_mode(info->dma_ch,
OMAP_DMA_DATA_BURST_16);
struct dma_slave_config cfg;
int rc;
memset(&cfg, 0, sizeof(cfg));
cfg.src_addr = info->phys_base;
cfg.dst_addr = info->phys_base;
cfg.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
cfg.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
cfg.src_maxburst = 16;
cfg.dst_maxburst = 16;
rc = dmaengine_slave_config(info->dma, &cfg);
if (rc) {
dev_err(&pdev->dev, "DMA engine slave config failed: %d\n",
rc);
goto out_release_mem_region;
}
info->nand.read_buf = omap_read_buf_dma_pref;
info->nand.write_buf = omap_write_buf_dma_pref;
}
......@@ -1358,6 +1362,8 @@ static int __devinit omap_nand_probe(struct platform_device *pdev)
return 0;
out_release_mem_region:
if (info->dma)
dma_release_channel(info->dma);
release_mem_region(info->phys_base, NAND_IO_SIZE);
out_free_info:
kfree(info);
......@@ -1373,8 +1379,8 @@ static int omap_nand_remove(struct platform_device *pdev)
omap3_free_bch(&info->mtd);
platform_set_drvdata(pdev, NULL);
if (info->dma_ch != -1)
omap_free_dma(info->dma_ch);
if (info->dma)
dma_release_channel(info->dma);
if (info->gpmc_irq)
free_irq(info->gpmc_irq, info);
......
This diff is collapsed.
This diff is collapsed.
/*
* OMAP DMA Engine support
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __LINUX_OMAP_DMA_H
#define __LINUX_OMAP_DMA_H
struct dma_chan;
#if defined(CONFIG_DMA_OMAP) || defined(CONFIG_DMA_OMAP_MODULE)
bool omap_dma_filter_fn(struct dma_chan *, void *);
#else
static inline bool omap_dma_filter_fn(struct dma_chan *c, void *d)
{
return false;
}
#endif
#endif
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment