Skip to content

L
linux
Commit a6e95a86 authored by Ralf Baechle's avatar Ralf Baechle
Browse files
Options

MIPS: PowerTV: Remove support code. 

Nobody seems to care about this platform anymore and my attempts to find
somebody willing to provide some tlc for PowerTV have failed so far.

So let's nuke the bloody thing.
Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
Patchwork: https://patchwork.linux-mips.org/patch/5910/
parent 1d7bf993
Expand all Show whitespace changes
Inline Side-by-side
Showing with 0 additions and 5972 deletions
arch/mips/Kbuild.platforms
View file @ a6e95a86
......@@ -20,7 +20,6 @@ platforms += mti-sead3
platforms += netlogic
platforms += pmcs-msp71xx
platforms += pnx833x
platforms += powertv
platforms += ralink
platforms += rb532
platforms += sgi-ip22
......
arch/mips/Kconfig
View file @ a6e95a86
......@@ -415,23 +415,6 @@ config PMC_MSP
of integrated peripherals, interfaces and DSPs in addition to
a variety of MIPS cores.
config POWERTV
bool "Cisco PowerTV"
select BOOT_ELF32
select CEVT_R4K
select CPU_MIPSR2_IRQ_VI
select CPU_MIPSR2_IRQ_EI
select CSRC_POWERTV
select DMA_NONCOHERENT
select HW_HAS_PCI
select SYS_HAS_CPU_MIPS32_R2
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_BIG_ENDIAN
select SYS_SUPPORTS_HIGHMEM
select USB_OHCI_LITTLE_ENDIAN
help
This enables support for the Cisco PowerTV Platform.
config RALINK
bool "Ralink based machines"
select CEVT_R4K
......@@ -814,7 +797,6 @@ source "arch/mips/jz4740/Kconfig"
source "arch/mips/lantiq/Kconfig"
source "arch/mips/lasat/Kconfig"
source "arch/mips/pmcs-msp71xx/Kconfig"
source "arch/mips/powertv/Kconfig"
source "arch/mips/ralink/Kconfig"
source "arch/mips/sgi-ip27/Kconfig"
source "arch/mips/sibyte/Kconfig"
......@@ -893,9 +875,6 @@ config CSRC_BCM1480
config CSRC_IOASIC
bool
config CSRC_POWERTV
bool
config CSRC_R4K
bool
......
arch/mips/configs/powertv_defconfig deleted 100644 → 0
View file @ 1d7bf993
CONFIG_POWERTV=y
CONFIG_BOOTLOADER_FAMILY="R2"
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_HZ_1000=y
CONFIG_PREEMPT=y
# CONFIG_SECCOMP is not set
CONFIG_EXPERIMENTAL=y
CONFIG_CROSS_COMPILE=""
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
CONFIG_LOG_BUF_SHIFT=16
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
# CONFIG_RD_GZIP is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_EXPERT=y
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_KALLSYMS_ALL=y
# CONFIG_PCSPKR_PLATFORM is not set
# CONFIG_EPOLL is not set
# CONFIG_SIGNALFD is not set
# CONFIG_EVENTFD is not set
# CONFIG_VM_EVENT_COUNTERS is not set
# CONFIG_SLUB_DEBUG is not set
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
CONFIG_PCI=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_IP_PNP=y
CONFIG_SYN_COOKIES=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
# CONFIG_INET_DIAG is not set
CONFIG_IPV6=y
CONFIG_IPV6_PRIVACY=y
CONFIG_INET6_AH=y
CONFIG_INET6_ESP=y
CONFIG_INET6_IPCOMP=y
# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
# CONFIG_INET6_XFRM_MODE_BEET is not set
# CONFIG_IPV6_SIT is not set
CONFIG_IPV6_TUNNEL=y
CONFIG_NETFILTER=y
# CONFIG_BRIDGE_NETFILTER is not set
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=y
CONFIG_IP_NF_IPTABLES=y
CONFIG_IP_NF_FILTER=y
CONFIG_IP_NF_ARPTABLES=y
CONFIG_IP_NF_ARPFILTER=y
CONFIG_IP6_NF_IPTABLES=y
CONFIG_IP6_NF_FILTER=y
CONFIG_BRIDGE=y
CONFIG_NET_SCHED=y
CONFIG_NET_SCH_TBF=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_MTD=y
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_NAND=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=32768
# CONFIG_MISC_DEVICES is not set
# CONFIG_SCSI_PROC_FS is not set
CONFIG_BLK_DEV_SD=y
# CONFIG_SCSI_LOWLEVEL is not set
CONFIG_ATA=y
CONFIG_NETDEVICES=y
CONFIG_NET_ETHERNET=y
# CONFIG_WLAN is not set
CONFIG_USB_RTL8150=y
# CONFIG_INPUT_MOUSEDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_SERIO is not set
# CONFIG_VT is not set
# CONFIG_DEVKMEM is not set
# CONFIG_LEGACY_PTYS is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_HWMON is not set
# CONFIG_MFD_SUPPORT is not set
# CONFIG_VGA_ARB is not set
CONFIG_USB_HIDDEV=y
CONFIG_USB=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_STORAGE=y
CONFIG_USB_SERIAL=y
CONFIG_USB_SERIAL_CONSOLE=y
CONFIG_USB_SERIAL_CP210X=y
CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
# CONFIG_EXT3_FS_XATTR is not set
# CONFIG_DNOTIFY is not set
CONFIG_FUSE_FS=y
CONFIG_PROC_KCORE=y
CONFIG_TMPFS=y
CONFIG_JFFS2_FS=y
CONFIG_CRAMFS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_ROOT_NFS=y
CONFIG_PRINTK_TIME=y
CONFIG_DEBUG_FS=y
CONFIG_DEBUG_KERNEL=y
CONFIG_DETECT_HUNG_TASK=y
# CONFIG_SCHED_DEBUG is not set
# CONFIG_DEBUG_PREEMPT is not set
CONFIG_DEBUG_INFO=y
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_EARLY_PRINTK is not set
CONFIG_CMDLINE_BOOL=y
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
arch/mips/include/asm/mach-powertv/asic.h deleted 100644 → 0
View file @ 1d7bf993
/*
* Copyright (C) 2009 Cisco Systems, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#ifndef _ASM_MACH_POWERTV_ASIC_H
#define _ASM_MACH_POWERTV_ASIC_H
#include <linux/ioport.h>
#include <linux/platform_device.h>
#include <asm/mach-powertv/asic_regs.h>
#define DVR_CAPABLE (1<<0)
#define PCIE_CAPABLE (1<<1)
#define FFS_CAPABLE (1<<2)
#define DISPLAY_CAPABLE (1<<3)
/* Platform Family types
* For compitability, the new value must be added in the end */
enum family_type {
FAMILY_8500,
FAMILY_8500RNG,
FAMILY_4500,
FAMILY_1500,
FAMILY_8600,
FAMILY_4600,
FAMILY_4600VZA,
FAMILY_8600VZB,
FAMILY_1500VZE,
FAMILY_1500VZF,
FAMILY_8700,
FAMILIES
};
/* Register maps for each ASIC */
extern const struct register_map calliope_register_map;
extern const struct register_map cronus_register_map;
extern const struct register_map gaia_register_map;
extern const struct register_map zeus_register_map;
extern struct resource dvr_cronus_resources[];
extern struct resource dvr_gaia_resources[];
extern struct resource dvr_zeus_resources[];
extern struct resource non_dvr_calliope_resources[];
extern struct resource non_dvr_cronus_resources[];
extern struct resource non_dvr_cronuslite_resources[];
extern struct resource non_dvr_gaia_resources[];
extern struct resource non_dvr_vz_calliope_resources[];
extern struct resource non_dvr_vze_calliope_resources[];
extern struct resource non_dvr_vzf_calliope_resources[];
extern struct resource non_dvr_zeus_resources[];
extern void powertv_platform_init(void);
extern void platform_alloc_bootmem(void);
extern enum asic_type platform_get_asic(void);
extern enum family_type platform_get_family(void);
extern int platform_supports_dvr(void);
extern int platform_supports_ffs(void);
extern int platform_supports_pcie(void);
extern int platform_supports_display(void);
extern void configure_platform(void);
/* Platform Resources */
#define ASIC_RESOURCE_GET_EXISTS 1
extern struct resource *asic_resource_get(const char *name);
extern void platform_release_memory(void *baddr, int size);
/* USB configuration */
struct usb_hcd; /* Forward reference */
extern void platform_configure_usb_ehci(void);
extern void platform_unconfigure_usb_ehci(void);
extern void platform_configure_usb_ohci(void);
extern void platform_unconfigure_usb_ohci(void);
/* Resource for ASIC registers */
extern struct resource asic_resource;
extern int platform_usb_devices_init(struct platform_device **echi_dev,
struct platform_device **ohci_dev);
/* Reboot Cause */
extern void set_reboot_cause(char code, unsigned int data, unsigned int data2);
extern void set_locked_reboot_cause(char code, unsigned int data,
unsigned int data2);
enum sys_reboot_type {
sys_unknown_reboot = 0x00, /* Unknown reboot cause */
sys_davic_change = 0x01, /* Reboot due to change in DAVIC
* mode */
sys_user_reboot = 0x02, /* Reboot initiated by user */
sys_system_reboot = 0x03, /* Reboot initiated by OS */
sys_trap_reboot = 0x04, /* Reboot due to a CPU trap */
sys_silent_reboot = 0x05, /* Silent reboot */
sys_boot_ldr_reboot = 0x06, /* Bootloader reboot */
sys_power_up_reboot = 0x07, /* Power on bootup. Older
* drivers may report as
* userReboot. */
sys_code_change = 0x08, /* Reboot to take code change.
* Older drivers may report as
* userReboot. */
sys_hardware_reset = 0x09, /* HW watchdog or front-panel
* reset button reset. Older
* drivers may report as
* userReboot. */
sys_watchdogInterrupt = 0x0A /* Pre-watchdog interrupt */
};
#endif /* _ASM_MACH_POWERTV_ASIC_H */
arch/mips/include/asm/mach-powertv/asic_reg_map.h deleted 100644 → 0
View file @ 1d7bf993
/*
* asic_reg_map.h
*
* A macro-enclosed list of the elements for the register_map structure for
* use in defining and manipulating the structure.
*
* Copyright (C) 2009 Cisco Systems, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
REGISTER_MAP_ELEMENT(eic_slow0_strt_add)
REGISTER_MAP_ELEMENT(eic_cfg_bits)
REGISTER_MAP_ELEMENT(eic_ready_status)
REGISTER_MAP_ELEMENT(chipver3)
REGISTER_MAP_ELEMENT(chipver2)
REGISTER_MAP_ELEMENT(chipver1)
REGISTER_MAP_ELEMENT(chipver0)
REGISTER_MAP_ELEMENT(uart1_intstat)
REGISTER_MAP_ELEMENT(uart1_inten)
REGISTER_MAP_ELEMENT(uart1_config1)
REGISTER_MAP_ELEMENT(uart1_config2)
REGISTER_MAP_ELEMENT(uart1_divisorhi)
REGISTER_MAP_ELEMENT(uart1_divisorlo)
REGISTER_MAP_ELEMENT(uart1_data)
REGISTER_MAP_ELEMENT(uart1_status)
REGISTER_MAP_ELEMENT(int_stat_3)
REGISTER_MAP_ELEMENT(int_stat_2)
REGISTER_MAP_ELEMENT(int_stat_1)
REGISTER_MAP_ELEMENT(int_stat_0)
REGISTER_MAP_ELEMENT(int_config)
REGISTER_MAP_ELEMENT(int_int_scan)
REGISTER_MAP_ELEMENT(ien_int_3)
REGISTER_MAP_ELEMENT(ien_int_2)
REGISTER_MAP_ELEMENT(ien_int_1)
REGISTER_MAP_ELEMENT(ien_int_0)
REGISTER_MAP_ELEMENT(int_level_3_3)
REGISTER_MAP_ELEMENT(int_level_3_2)
REGISTER_MAP_ELEMENT(int_level_3_1)
REGISTER_MAP_ELEMENT(int_level_3_0)
REGISTER_MAP_ELEMENT(int_level_2_3)
REGISTER_MAP_ELEMENT(int_level_2_2)
REGISTER_MAP_ELEMENT(int_level_2_1)
REGISTER_MAP_ELEMENT(int_level_2_0)
REGISTER_MAP_ELEMENT(int_level_1_3)
REGISTER_MAP_ELEMENT(int_level_1_2)
REGISTER_MAP_ELEMENT(int_level_1_1)
REGISTER_MAP_ELEMENT(int_level_1_0)
REGISTER_MAP_ELEMENT(int_level_0_3)
REGISTER_MAP_ELEMENT(int_level_0_2)
REGISTER_MAP_ELEMENT(int_level_0_1)
REGISTER_MAP_ELEMENT(int_level_0_0)
REGISTER_MAP_ELEMENT(int_docsis_en)
REGISTER_MAP_ELEMENT(mips_pll_setup)
REGISTER_MAP_ELEMENT(fs432x4b4_usb_ctl)
REGISTER_MAP_ELEMENT(test_bus)
REGISTER_MAP_ELEMENT(crt_spare)
REGISTER_MAP_ELEMENT(usb2_ohci_int_mask)
REGISTER_MAP_ELEMENT(usb2_strap)
REGISTER_MAP_ELEMENT(ehci_hcapbase)
REGISTER_MAP_ELEMENT(ohci_hc_revision)
REGISTER_MAP_ELEMENT(bcm1_bs_lmi_steer)
REGISTER_MAP_ELEMENT(usb2_control)
REGISTER_MAP_ELEMENT(usb2_stbus_obc)
REGISTER_MAP_ELEMENT(usb2_stbus_mess_size)
REGISTER_MAP_ELEMENT(usb2_stbus_chunk_size)
REGISTER_MAP_ELEMENT(pcie_regs)
REGISTER_MAP_ELEMENT(tim_ch)
REGISTER_MAP_ELEMENT(tim_cl)
REGISTER_MAP_ELEMENT(gpio_dout)
REGISTER_MAP_ELEMENT(gpio_din)
REGISTER_MAP_ELEMENT(gpio_dir)
REGISTER_MAP_ELEMENT(watchdog)
REGISTER_MAP_ELEMENT(front_panel)
REGISTER_MAP_ELEMENT(misc_clk_ctl1)
REGISTER_MAP_ELEMENT(misc_clk_ctl2)
REGISTER_MAP_ELEMENT(crt_ext_ctl)
REGISTER_MAP_ELEMENT(register_maps)
arch/mips/include/asm/mach-powertv/asic_regs.h deleted 100644 → 0
View file @ 1d7bf993
/*
* Copyright (C) 2009 Cisco Systems, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#ifndef __ASM_MACH_POWERTV_ASIC_H_
#define __ASM_MACH_POWERTV_ASIC_H_
#include <linux/io.h>
/* ASIC types */
enum asic_type {
ASIC_UNKNOWN,
ASIC_ZEUS,
ASIC_CALLIOPE,
ASIC_CRONUS,
ASIC_CRONUSLITE,
ASIC_GAIA,
ASICS /* Number of supported ASICs */
};
/* hardcoded values read from Chip Version registers */
#define CRONUS_10 0x0B4C1C20
#define CRONUS_11 0x0B4C1C21
#define CRONUSLITE_10 0x0B4C1C40
#define NAND_FLASH_BASE 0x03000000
#define CALLIOPE_IO_BASE 0x08000000
#define GAIA_IO_BASE 0x09000000
#define CRONUS_IO_BASE 0x09000000
#define ZEUS_IO_BASE 0x09000000
#define ASIC_IO_SIZE 0x01000000
/* Definitions for backward compatibility */
#define UART1_INTSTAT uart1_intstat
#define UART1_INTEN uart1_inten
#define UART1_CONFIG1 uart1_config1
#define UART1_CONFIG2 uart1_config2
#define UART1_DIVISORHI uart1_divisorhi
#define UART1_DIVISORLO uart1_divisorlo
#define UART1_DATA uart1_data
#define UART1_STATUS uart1_status
/* ASIC register enumeration */
union register_map_entry {
unsigned long phys;
u32 *virt;
};
#define REGISTER_MAP_ELEMENT(x) union register_map_entry x;
struct register_map {
#include <asm/mach-powertv/asic_reg_map.h>
};
#undef REGISTER_MAP_ELEMENT
/**
* register_map_offset_phys - add an offset to the physical address
* @map: Pointer to the &struct register_map
* @offset: Value to add
*
* Only adds the base to non-zero physical addresses
*/
static inline void register_map_offset_phys(struct register_map *map,
unsigned long offset)
{
#define REGISTER_MAP_ELEMENT(x) do { \
if (map->x.phys != 0) \
map->x.phys += offset; \
} while (false);
#include <asm/mach-powertv/asic_reg_map.h>
#undef REGISTER_MAP_ELEMENT
}
/**
* register_map_virtualize - Convert &register_map to virtual addresses
* @map: Pointer to &register_map to virtualize
*/
static inline void register_map_virtualize(struct register_map *map)
{
#define REGISTER_MAP_ELEMENT(x) do { \
map->x.virt = (!map->x.phys) ? NULL : \
UNCAC_ADDR(phys_to_virt(map->x.phys)); \
} while (false);
#include <asm/mach-powertv/asic_reg_map.h>
#undef REGISTER_MAP_ELEMENT
}
extern struct register_map _asic_register_map;
extern unsigned long asic_phy_base;
/*
* Macros to interface to registers through their ioremapped address
* asic_reg_phys_addr Returns the physical address of the given register
* asic_reg_addr Returns the iomapped virtual address of the given
* register.
*/
#define asic_reg_addr(x) (_asic_register_map.x.virt)
#define asic_reg_phys_addr(x) (virt_to_phys((void *) CAC_ADDR( \
(unsigned long) asic_reg_addr(x))))
/*
* The asic_reg macro is gone. It should be replaced by either asic_read or
* asic_write, as appropriate.
*/
#define asic_read(x) readl(asic_reg_addr(x))
#define asic_write(v, x) writel(v, asic_reg_addr(x))
extern void asic_irq_init(void);
#endif
arch/mips/include/asm/mach-powertv/cpu-feature-overrides.h deleted 100644 → 0
View file @ 1d7bf993
/*
* Copyright (C) 2010 Cisco Systems, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#ifndef _ASM_MACH_POWERTV_CPU_FEATURE_OVERRIDES_H_
#define _ASM_MACH_POWERTV_CPU_FEATURE_OVERRIDES_H_
#define cpu_has_tlb 1
#define cpu_has_4kex 1
#define cpu_has_3k_cache 0
#define cpu_has_4k_cache 1
#define cpu_has_tx39_cache 0
#define cpu_has_fpu 0
#define cpu_has_counter 1
#define cpu_has_watch 1
#define cpu_has_divec 1
#define cpu_has_vce 0
#define cpu_has_cache_cdex_p 0
#define cpu_has_cache_cdex_s 0
#define cpu_has_mcheck 1
#define cpu_has_ejtag 1
#define cpu_has_llsc 1
#define cpu_has_mips16 0
#define cpu_has_mdmx 0
#define cpu_has_mips3d 0
#define cpu_has_smartmips 0
#define cpu_has_vtag_icache 0
#define cpu_has_dc_aliases 0
#define cpu_has_ic_fills_f_dc 0
#define cpu_has_mips32r1 0
#define cpu_has_mips32r2 1
#define cpu_has_mips64r1 0
#define cpu_has_mips64r2 0
#define cpu_has_dsp 0
#define cpu_has_dsp2 0
#define cpu_has_mipsmt 0
#define cpu_has_userlocal 0
#define cpu_has_nofpuex 0
#define cpu_has_64bits 0
#define cpu_has_64bit_zero_reg 0
#define cpu_has_vint 1
#define cpu_has_veic 1
#define cpu_has_inclusive_pcaches 0
#define cpu_dcache_line_size() 32
#define cpu_icache_line_size() 32
#endif
arch/mips/include/asm/mach-powertv/dma-coherence.h deleted 100644 → 0
View file @ 1d7bf993
/*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Version from mach-generic modified to support PowerTV port
* Portions Copyright (C) 2009 Cisco Systems, Inc.
* Copyright (C) 2006 Ralf Baechle <ralf@linux-mips.org>
*
*/
#ifndef __ASM_MACH_POWERTV_DMA_COHERENCE_H
#define __ASM_MACH_POWERTV_DMA_COHERENCE_H
#include <linux/sched.h>
#include <linux/device.h>
#include <asm/mach-powertv/asic.h>
static inline bool is_kseg2(void *addr)
{
return (unsigned long)addr >= KSEG2;
}
static inline unsigned long virt_to_phys_from_pte(void *addr)
{
pgd_t *pgd;
pud_t *pud;
pmd_t *pmd;
pte_t *ptep, pte;
unsigned long virt_addr = (unsigned long)addr;
unsigned long phys_addr = 0UL;
/* get the page global directory. */
pgd = pgd_offset_k(virt_addr);
if (!pgd_none(*pgd)) {
/* get the page upper directory */
pud = pud_offset(pgd, virt_addr);
if (!pud_none(*pud)) {
/* get the page middle directory */
pmd = pmd_offset(pud, virt_addr);
if (!pmd_none(*pmd)) {
/* get a pointer to the page table entry */
ptep = pte_offset(pmd, virt_addr);
pte = *ptep;
/* check for a valid page */
if (pte_present(pte)) {
/* get the physical address the page is
* referring to */
phys_addr = (unsigned long)
page_to_phys(pte_page(pte));
/* add the offset within the page */
phys_addr |= (virt_addr & ~PAGE_MASK);
}
}
}
}
return phys_addr;
}
static inline dma_addr_t plat_map_dma_mem(struct device *dev, void *addr,
size_t size)
{
if (is_kseg2(addr))
return phys_to_dma(virt_to_phys_from_pte(addr));
else
return phys_to_dma(virt_to_phys(addr));
}
static inline dma_addr_t plat_map_dma_mem_page(struct device *dev,
struct page *page)
{
return phys_to_dma(page_to_phys(page));
}
static inline unsigned long plat_dma_addr_to_phys(struct device *dev,
dma_addr_t dma_addr)
{
return dma_to_phys(dma_addr);
}
static inline void plat_unmap_dma_mem(struct device *dev, dma_addr_t dma_addr,
size_t size, enum dma_data_direction direction)
{
}
static inline int plat_dma_supported(struct device *dev, u64 mask)
{
/*
* we fall back to GFP_DMA when the mask isn't all 1s,
* so we can't guarantee allocations that must be
* within a tighter range than GFP_DMA..
*/
if (mask < DMA_BIT_MASK(24))
return 0;
return 1;
}
static inline int plat_device_is_coherent(struct device *dev)
{
return 0;
}
#endif /* __ASM_MACH_POWERTV_DMA_COHERENCE_H */
arch/mips/include/asm/mach-powertv/interrupts.h deleted 100644 → 0
View file @ 1d7bf993
This diff is collapsed.
arch/mips/include/asm/mach-powertv/ioremap.h deleted 100644 → 0
View file @ 1d7bf993
/*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*
* Portions Copyright (C) Cisco Systems, Inc.
*/
#ifndef __ASM_MACH_POWERTV_IOREMAP_H
#define __ASM_MACH_POWERTV_IOREMAP_H
#include <linux/types.h>
#include <linux/log2.h>
#include <linux/compiler.h>
#include <asm/pgtable-bits.h>
#include <asm/addrspace.h>
/* We're going to mess with bits, so get sizes */
#define IOR_BPC 8 /* Bits per char */
#define IOR_PHYS_BITS (IOR_BPC * sizeof(phys_addr_t))
#define IOR_DMA_BITS (IOR_BPC * sizeof(dma_addr_t))
/*
* Define the granularity of physical/DMA mapping in terms of the number
* of bits that defines the offset within a grain. These will be the
* least significant bits of the address. The rest of a physical or DMA
* address will be used to index into an appropriate table to find the
* offset to add to the address to yield the corresponding DMA or physical
* address, respectively.
*/
#define IOR_LSBITS 22 /* Bits in a grain */
/*
* Compute the number of most significant address bits after removing those
* used for the offset within a grain and then compute the number of table
* entries for the conversion.
*/
#define IOR_PHYS_MSBITS (IOR_PHYS_BITS - IOR_LSBITS)
#define IOR_NUM_PHYS_TO_DMA ((phys_addr_t) 1 << IOR_PHYS_MSBITS)
#define IOR_DMA_MSBITS (IOR_DMA_BITS - IOR_LSBITS)
#define IOR_NUM_DMA_TO_PHYS ((dma_addr_t) 1 << IOR_DMA_MSBITS)
/*
* Define data structures used as elements in the arrays for the conversion
* between physical and DMA addresses. We do some slightly fancy math to
* compute the width of the offset element of the conversion tables so
* that we can have the smallest conversion tables. Next, round up the
* sizes to the next higher power of two, i.e. the offset element will have
* 8, 16, 32, 64, etc. bits. This eliminates the need to mask off any
* bits. Finally, we compute a shift value that puts the most significant
* bits of the offset into the most significant bits of the offset element.
* This makes it more efficient on processors without barrel shifters and
* easier to see the values if the conversion table is dumped in binary.
*/
#define _IOR_OFFSET_WIDTH(n) (1 << order_base_2(n))
#define IOR_OFFSET_WIDTH(n) \
(_IOR_OFFSET_WIDTH(n) < 8 ? 8 : _IOR_OFFSET_WIDTH(n))
#define IOR_PHYS_OFFSET_BITS IOR_OFFSET_WIDTH(IOR_PHYS_MSBITS)
#define IOR_PHYS_SHIFT (IOR_PHYS_BITS - IOR_PHYS_OFFSET_BITS)
#define IOR_DMA_OFFSET_BITS IOR_OFFSET_WIDTH(IOR_DMA_MSBITS)
#define IOR_DMA_SHIFT (IOR_DMA_BITS - IOR_DMA_OFFSET_BITS)
struct ior_phys_to_dma {
dma_addr_t offset:IOR_DMA_OFFSET_BITS __packed
__aligned((IOR_DMA_OFFSET_BITS / IOR_BPC));
};
struct ior_dma_to_phys {
dma_addr_t offset:IOR_PHYS_OFFSET_BITS __packed
__aligned((IOR_PHYS_OFFSET_BITS / IOR_BPC));
};
extern struct ior_phys_to_dma _ior_phys_to_dma[IOR_NUM_PHYS_TO_DMA];
extern struct ior_dma_to_phys _ior_dma_to_phys[IOR_NUM_DMA_TO_PHYS];
static inline dma_addr_t _phys_to_dma_offset_raw(phys_addr_t phys)
{
return (dma_addr_t)_ior_phys_to_dma[phys >> IOR_LSBITS].offset;
}
static inline dma_addr_t _dma_to_phys_offset_raw(dma_addr_t dma)
{
return (dma_addr_t)_ior_dma_to_phys[dma >> IOR_LSBITS].offset;
}
/* These are not portable and should not be used in drivers. Drivers should
* be using ioremap() and friends to map physical addresses to virtual
* addresses and dma_map*() and friends to map virtual addresses into DMA
* addresses and back.
*/
static inline dma_addr_t phys_to_dma(phys_addr_t phys)
{
return phys + (_phys_to_dma_offset_raw(phys) << IOR_PHYS_SHIFT);
}
static inline phys_addr_t dma_to_phys(dma_addr_t dma)
{
return dma + (_dma_to_phys_offset_raw(dma) << IOR_DMA_SHIFT);
}
extern void ioremap_add_map(dma_addr_t phys, phys_addr_t alias,
dma_addr_t size);
/*
* Allow physical addresses to be fixed up to help peripherals located
* outside the low 32-bit range -- generic pass-through version.
*/
static inline phys_t fixup_bigphys_addr(phys_t phys_addr, phys_t size)
{
return phys_addr;
}
/*
* Handle the special case of addresses the area aliased into the first
* 512 MiB of the processor's physical address space. These turn into either
* kseg0 or kseg1 addresses, depending on flags.
*/
static inline void __iomem *plat_ioremap(phys_t start, unsigned long size,
unsigned long flags)
{
phys_addr_t start_offset;
void __iomem *result = NULL;
/* Start by checking to see whether this is an aliased address */
start_offset = _dma_to_phys_offset_raw(start);
/*
* If:
* o the memory is aliased into the first 512 MiB, and
* o the start and end are in the same RAM bank, and
* o we don't have a zero size or wrap around, and
* o we are supposed to create an uncached mapping,
* handle this is a kseg0 or kseg1 address
*/
if (start_offset != 0) {
phys_addr_t last;
dma_addr_t dma_to_phys_offset;
last = start + size - 1;
dma_to_phys_offset =
_dma_to_phys_offset_raw(last) << IOR_DMA_SHIFT;
if (dma_to_phys_offset == start_offset &&
size != 0 && start <= last) {
phys_t adjusted_start;
adjusted_start = start + start_offset;
if (flags == _CACHE_UNCACHED)
result = (void __iomem *) (unsigned long)
CKSEG1ADDR(adjusted_start);
else
result = (void __iomem *) (unsigned long)
CKSEG0ADDR(adjusted_start);
}
}
return result;
}
static inline int plat_iounmap(const volatile void __iomem *addr)
{
return 0;
}
#endif /* __ASM_MACH_POWERTV_IOREMAP_H */
arch/mips/include/asm/mach-powertv/irq.h deleted 100644 → 0
View file @ 1d7bf993
/*
* Copyright (C) 2009 Cisco Systems, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#ifndef _ASM_MACH_POWERTV_IRQ_H
#define _ASM_MACH_POWERTV_IRQ_H
#include <asm/mach-powertv/interrupts.h>
#define MIPS_CPU_IRQ_BASE ibase
#define NR_IRQS 127
#endif
arch/mips/include/asm/mach-powertv/powertv-clock.h deleted 100644 → 0
View file @ 1d7bf993
/*
* Copyright (C) 2009 Cisco Systems, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
/*
* Local definitions for the powertv PCI code
*/
#ifndef _POWERTV_PCI_POWERTV_PCI_H_
#define _POWERTV_PCI_POWERTV_PCI_H_
extern int asic_pcie_map_irq(const struct pci_dev *dev, u8 slot, u8 pin);
extern int asic_pcie_init(void);
extern int asic_pcie_init(void);
extern int log_level;
#endif
arch/mips/include/asm/mach-powertv/war.h deleted 100644 → 0
View file @ 1d7bf993
/*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* This version for the PowerTV platform copied from the Malta version.
*
* Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org>
* Portions copyright (C) 2009 Cisco Systems, Inc.
*/
#ifndef __ASM_MACH_POWERTV_WAR_H
#define __ASM_MACH_POWERTV_WAR_H
#define R4600_V1_INDEX_ICACHEOP_WAR 0
#define R4600_V1_HIT_CACHEOP_WAR 0
#define R4600_V2_HIT_CACHEOP_WAR 0
#define R5432_CP0_INTERRUPT_WAR 0
#define BCM1250_M3_WAR 0
#define SIBYTE_1956_WAR 0
#define MIPS4K_ICACHE_REFILL_WAR 1
#define MIPS_CACHE_SYNC_WAR 1
#define TX49XX_ICACHE_INDEX_INV_WAR 0
#define ICACHE_REFILLS_WORKAROUND_WAR 1
#define R10000_LLSC_WAR 0
#define MIPS34K_MISSED_ITLB_WAR 0
#endif /* __ASM_MACH_POWERTV_WAR_H */
arch/mips/kernel/Makefile
View file @ a6e95a86
......@@ -26,7 +26,6 @@ obj-$(CONFIG_CEVT_TXX9) += cevt-txx9.o
obj-$(CONFIG_CSRC_BCM1480) += csrc-bcm1480.o
obj-$(CONFIG_CSRC_GIC) += csrc-gic.o
obj-$(CONFIG_CSRC_IOASIC) += csrc-ioasic.o
obj-$(CONFIG_CSRC_POWERTV) += csrc-powertv.o
obj-$(CONFIG_CSRC_R4K) += csrc-r4k.o
obj-$(CONFIG_CSRC_SB1250) += csrc-sb1250.o
obj-$(CONFIG_SYNC_R4K) += sync-r4k.o
......
arch/mips/kernel/csrc-powertv.c deleted 100644 → 0
View file @ 1d7bf993
/*
* Copyright (C) 2008 Scientific-Atlanta, Inc.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*/
/*
* The file comes from kernel/csrc-r4k.c
*/
#include <linux/clocksource.h>
#include <linux/init.h>
#include <asm/time.h> /* Not included in linux/time.h */
#include <asm/mach-powertv/asic_regs.h>
#include "powertv-clock.h"
/* MIPS PLL Register Definitions */
#define PLL_GET_M(x) (((x) >> 8) & 0x000000FF)
#define PLL_GET_N(x) (((x) >> 16) & 0x000000FF)
#define PLL_GET_P(x) (((x) >> 24) & 0x00000007)
/*
* returns: Clock frequency in kHz
*/
unsigned int __init mips_get_pll_freq(void)
{
unsigned int pll_reg, m, n, p;
unsigned int fin = 54000; /* Base frequency in kHz */
unsigned int fout;
/* Read PLL register setting */
pll_reg = asic_read(mips_pll_setup);
m = PLL_GET_M(pll_reg);
n = PLL_GET_N(pll_reg);
p = PLL_GET_P(pll_reg);
pr_info("MIPS PLL Register:0x%x M=%d N=%d P=%d\n", pll_reg, m, n, p);
/* Calculate clock frequency = (2 * N * 54MHz) / (M * (2**P)) */
fout = ((2 * n * fin) / (m * (0x01 << p)));
pr_info("MIPS Clock Freq=%d kHz\n", fout);
return fout;
}
static cycle_t c0_hpt_read(struct clocksource *cs)
{
return read_c0_count();
}
static struct clocksource clocksource_mips = {
.name = "powertv-counter",
.read = c0_hpt_read,
.mask = CLOCKSOURCE_MASK(32),
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
static void __init powertv_c0_hpt_clocksource_init(void)
{
unsigned int pll_freq = mips_get_pll_freq();
pr_info("CPU frequency %d.%02d MHz\n", pll_freq / 1000,
(pll_freq % 1000) * 100 / 1000);
mips_hpt_frequency = pll_freq / 2 * 1000;
clocksource_mips.rating = 200 + mips_hpt_frequency / 10000000;
clocksource_register_hz(&clocksource_mips, mips_hpt_frequency);
}
/**
* struct tim_c - free running counter
* @hi: High 16 bits of the counter
* @lo: Low 32 bits of the counter
*
* Lays out the structure of the free running counter in memory. This counter
* increments at a rate of 27 MHz/8 on all platforms.
*/
struct tim_c {
unsigned int hi;
unsigned int lo;
};
static struct tim_c *tim_c;
static cycle_t tim_c_read(struct clocksource *cs)
{
unsigned int hi;
unsigned int next_hi;
unsigned int lo;
hi = readl(&tim_c->hi);
for (;;) {
lo = readl(&tim_c->lo);
next_hi = readl(&tim_c->hi);
if (next_hi == hi)
break;
hi = next_hi;
}
pr_crit("%s: read %llx\n", __func__, ((u64) hi << 32) | lo);
return ((u64) hi << 32) | lo;
}
#define TIM_C_SIZE 48 /* # bits in the timer */
static struct clocksource clocksource_tim_c = {
.name = "powertv-tim_c",
.read = tim_c_read,
.mask = CLOCKSOURCE_MASK(TIM_C_SIZE),
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
/**
* powertv_tim_c_clocksource_init - set up a clock source for the TIM_C clock
*
* We know that TIM_C counts at 27 MHz/8, so each cycle corresponds to
* 1 / (27,000,000/8) seconds.
*/
static void __init powertv_tim_c_clocksource_init(void)
{
const unsigned long counts_per_second = 27000000 / 8;
clocksource_tim_c.rating = 200;
clocksource_register_hz(&clocksource_tim_c, counts_per_second);
tim_c = (struct tim_c *) asic_reg_addr(tim_ch);
}
/**
powertv_clocksource_init - initialize all clocksources
*/
void __init powertv_clocksource_init(void)
{
powertv_c0_hpt_clocksource_init();
powertv_tim_c_clocksource_init();
}
arch/mips/powertv/Kconfig deleted 100644 → 0
View file @ 1d7bf993
config BOOTLOADER_FAMILY
string "POWERTV Bootloader Family string"
default "85"
depends on POWERTV
help
This value should be specified when the bootloader driver is disabled
and must be exactly two characters long. Families supported are:
R1 - RNG-100 R2 - RNG-200
A1 - Class A B1 - Class B
E1 - Class E F1 - Class F
44 - 45xx 46 - 46xx
85 - 85xx 86 - 86xx
arch/mips/powertv/Makefile deleted 100644 → 0
View file @ 1d7bf993
#
# Carsten Langgaard, carstenl@mips.com
# Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved.
#
# Carsten Langgaard, carstenl@mips.com
# Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved.
# Portions copyright (C) 2009 Cisco Systems, Inc.
#
# This program is free software; you can distribute it and/or modify it
# under the terms of the GNU General Public License (Version 2) as
# published by the Free Software Foundation.
#
# This program is distributed in the hope it will be useful, but WITHOUT
# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
# for more details.
#
# You should have received a copy of the GNU General Public License along
# with this program; if not, write to the Free Software Foundation, Inc.,
# 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
#
# Makefile for the Cisco PowerTV-specific kernel interface routines
# under Linux.
#
obj-y += init.o ioremap.o memory.o powertv_setup.o reset.o time.o \
asic/ pci/
obj-$(CONFIG_USB) += powertv-usb.o
arch/mips/powertv/Platform deleted 100644 → 0
View file @ 1d7bf993
#
# Cisco PowerTV Platform
#
platform-$(CONFIG_POWERTV) += powertv/
cflags-$(CONFIG_POWERTV) += \
-I$(srctree)/arch/mips/include/asm/mach-powertv
load-$(CONFIG_POWERTV) += 0xffffffff90800000
arch/mips/powertv/asic/Makefile deleted 100644 → 0
View file @ 1d7bf993
#
# Copyright (C) 2009 Scientific-Atlanta, Inc.
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
#
obj-y += asic-calliope.o asic-cronus.o asic-gaia.o asic-zeus.o \
asic_devices.o asic_int.o irq_asic.o prealloc-calliope.o \
prealloc-cronus.o prealloc-cronuslite.o prealloc-gaia.o prealloc-zeus.o
arch/mips/powertv/asic/asic-calliope.c deleted 100644 → 0
View file @ 1d7bf993
/*
* Locations of devices in the Calliope ASIC.
*
* Copyright (C) 2005-2009 Scientific-Atlanta, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*
* Author: Ken Eppinett
* David Schleef <ds@schleef.org>
*
* Description: Defines the platform resources for the SA settop.
*/
#include <linux/init.h>
#include <asm/mach-powertv/asic.h>
#define CALLIOPE_ADDR(x) (CALLIOPE_IO_BASE + (x))
const struct register_map calliope_register_map __initconst = {
.eic_slow0_strt_add = {.phys = CALLIOPE_ADDR(0x800000)},
.eic_cfg_bits = {.phys = CALLIOPE_ADDR(0x800038)},
.eic_ready_status = {.phys = CALLIOPE_ADDR(0x80004c)},
.chipver3 = {.phys = CALLIOPE_ADDR(0xA00800)},
.chipver2 = {.phys = CALLIOPE_ADDR(0xA00804)},
.chipver1 = {.phys = CALLIOPE_ADDR(0xA00808)},
.chipver0 = {.phys = CALLIOPE_ADDR(0xA0080c)},
/* The registers of IRBlaster */
.uart1_intstat = {.phys = CALLIOPE_ADDR(0xA01800)},
.uart1_inten = {.phys = CALLIOPE_ADDR(0xA01804)},
.uart1_config1 = {.phys = CALLIOPE_ADDR(0xA01808)},
.uart1_config2 = {.phys = CALLIOPE_ADDR(0xA0180C)},
.uart1_divisorhi = {.phys = CALLIOPE_ADDR(0xA01810)},
.uart1_divisorlo = {.phys = CALLIOPE_ADDR(0xA01814)},
.uart1_data = {.phys = CALLIOPE_ADDR(0xA01818)},
.uart1_status = {.phys = CALLIOPE_ADDR(0xA0181C)},
.int_stat_3 = {.phys = CALLIOPE_ADDR(0xA02800)},
.int_stat_2 = {.phys = CALLIOPE_ADDR(0xA02804)},
.int_stat_1 = {.phys = CALLIOPE_ADDR(0xA02808)},
.int_stat_0 = {.phys = CALLIOPE_ADDR(0xA0280c)},
.int_config = {.phys = CALLIOPE_ADDR(0xA02810)},
.int_int_scan = {.phys = CALLIOPE_ADDR(0xA02818)},
.ien_int_3 = {.phys = CALLIOPE_ADDR(0xA02830)},
.ien_int_2 = {.phys = CALLIOPE_ADDR(0xA02834)},
.ien_int_1 = {.phys = CALLIOPE_ADDR(0xA02838)},
.ien_int_0 = {.phys = CALLIOPE_ADDR(0xA0283c)},
.int_level_3_3 = {.phys = CALLIOPE_ADDR(0xA02880)},
.int_level_3_2 = {.phys = CALLIOPE_ADDR(0xA02884)},
.int_level_3_1 = {.phys = CALLIOPE_ADDR(0xA02888)},
.int_level_3_0 = {.phys = CALLIOPE_ADDR(0xA0288c)},
.int_level_2_3 = {.phys = CALLIOPE_ADDR(0xA02890)},
.int_level_2_2 = {.phys = CALLIOPE_ADDR(0xA02894)},
.int_level_2_1 = {.phys = CALLIOPE_ADDR(0xA02898)},
.int_level_2_0 = {.phys = CALLIOPE_ADDR(0xA0289c)},
.int_level_1_3 = {.phys = CALLIOPE_ADDR(0xA028a0)},
.int_level_1_2 = {.phys = CALLIOPE_ADDR(0xA028a4)},
.int_level_1_1 = {.phys = CALLIOPE_ADDR(0xA028a8)},
.int_level_1_0 = {.phys = CALLIOPE_ADDR(0xA028ac)},
.int_level_0_3 = {.phys = CALLIOPE_ADDR(0xA028b0)},
.int_level_0_2 = {.phys = CALLIOPE_ADDR(0xA028b4)},
.int_level_0_1 = {.phys = CALLIOPE_ADDR(0xA028b8)},
.int_level_0_0 = {.phys = CALLIOPE_ADDR(0xA028bc)},
.int_docsis_en = {.phys = CALLIOPE_ADDR(0xA028F4)},
.mips_pll_setup = {.phys = CALLIOPE_ADDR(0x980000)},
.fs432x4b4_usb_ctl = {.phys = CALLIOPE_ADDR(0x980030)},
.test_bus = {.phys = CALLIOPE_ADDR(0x9800CC)},
.crt_spare = {.phys = CALLIOPE_ADDR(0x9800d4)},
.usb2_ohci_int_mask = {.phys = CALLIOPE_ADDR(0x9A000c)},
.usb2_strap = {.phys = CALLIOPE_ADDR(0x9A0014)},
.ehci_hcapbase = {.phys = CALLIOPE_ADDR(0x9BFE00)},
.ohci_hc_revision = {.phys = CALLIOPE_ADDR(0x9BFC00)},
.bcm1_bs_lmi_steer = {.phys = CALLIOPE_ADDR(0x9E0004)},
.usb2_control = {.phys = CALLIOPE_ADDR(0x9E0054)},
.usb2_stbus_obc = {.phys = CALLIOPE_ADDR(0x9BFF00)},
.usb2_stbus_mess_size = {.phys = CALLIOPE_ADDR(0x9BFF04)},
.usb2_stbus_chunk_size = {.phys = CALLIOPE_ADDR(0x9BFF08)},
.pcie_regs = {.phys = 0x000000}, /* -doesn't exist- */
.tim_ch = {.phys = CALLIOPE_ADDR(0xA02C10)},
.tim_cl = {.phys = CALLIOPE_ADDR(0xA02C14)},
.gpio_dout = {.phys = CALLIOPE_ADDR(0xA02c20)},
.gpio_din = {.phys = CALLIOPE_ADDR(0xA02c24)},
.gpio_dir = {.phys = CALLIOPE_ADDR(0xA02c2C)},
.watchdog = {.phys = CALLIOPE_ADDR(0xA02c30)},
.front_panel = {.phys = 0x000000}, /* -not used- */
};
arch/mips/powertv/asic/asic-cronus.c deleted 100644 → 0
View file @ 1d7bf993
/*
* Locations of devices in the Cronus ASIC
*
* Copyright (C) 2005-2009 Scientific-Atlanta, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*
* Author: Ken Eppinett
* David Schleef <ds@schleef.org>
*
* Description: Defines the platform resources for the SA settop.
*/
#include <linux/init.h>
#include <asm/mach-powertv/asic.h>
#define CRONUS_ADDR(x) (CRONUS_IO_BASE + (x))
const struct register_map cronus_register_map __initconst = {
.eic_slow0_strt_add = {.phys = CRONUS_ADDR(0x000000)},
.eic_cfg_bits = {.phys = CRONUS_ADDR(0x000038)},
.eic_ready_status = {.phys = CRONUS_ADDR(0x00004C)},
.chipver3 = {.phys = CRONUS_ADDR(0x2A0800)},
.chipver2 = {.phys = CRONUS_ADDR(0x2A0804)},
.chipver1 = {.phys = CRONUS_ADDR(0x2A0808)},
.chipver0 = {.phys = CRONUS_ADDR(0x2A080C)},
/* The registers of IRBlaster */
.uart1_intstat = {.phys = CRONUS_ADDR(0x2A1800)},
.uart1_inten = {.phys = CRONUS_ADDR(0x2A1804)},
.uart1_config1 = {.phys = CRONUS_ADDR(0x2A1808)},
.uart1_config2 = {.phys = CRONUS_ADDR(0x2A180C)},
.uart1_divisorhi = {.phys = CRONUS_ADDR(0x2A1810)},
.uart1_divisorlo = {.phys = CRONUS_ADDR(0x2A1814)},
.uart1_data = {.phys = CRONUS_ADDR(0x2A1818)},
.uart1_status = {.phys = CRONUS_ADDR(0x2A181C)},
.int_stat_3 = {.phys = CRONUS_ADDR(0x2A2800)},
.int_stat_2 = {.phys = CRONUS_ADDR(0x2A2804)},
.int_stat_1 = {.phys = CRONUS_ADDR(0x2A2808)},
.int_stat_0 = {.phys = CRONUS_ADDR(0x2A280C)},
.int_config = {.phys = CRONUS_ADDR(0x2A2810)},
.int_int_scan = {.phys = CRONUS_ADDR(0x2A2818)},
.ien_int_3 = {.phys = CRONUS_ADDR(0x2A2830)},
.ien_int_2 = {.phys = CRONUS_ADDR(0x2A2834)},
.ien_int_1 = {.phys = CRONUS_ADDR(0x2A2838)},
.ien_int_0 = {.phys = CRONUS_ADDR(0x2A283C)},
.int_level_3_3 = {.phys = CRONUS_ADDR(0x2A2880)},
.int_level_3_2 = {.phys = CRONUS_ADDR(0x2A2884)},
.int_level_3_1 = {.phys = CRONUS_ADDR(0x2A2888)},
.int_level_3_0 = {.phys = CRONUS_ADDR(0x2A288C)},
.int_level_2_3 = {.phys = CRONUS_ADDR(0x2A2890)},
.int_level_2_2 = {.phys = CRONUS_ADDR(0x2A2894)},
.int_level_2_1 = {.phys = CRONUS_ADDR(0x2A2898)},
.int_level_2_0 = {.phys = CRONUS_ADDR(0x2A289C)},
.int_level_1_3 = {.phys = CRONUS_ADDR(0x2A28A0)},
.int_level_1_2 = {.phys = CRONUS_ADDR(0x2A28A4)},
.int_level_1_1 = {.phys = CRONUS_ADDR(0x2A28A8)},
.int_level_1_0 = {.phys = CRONUS_ADDR(0x2A28AC)},
.int_level_0_3 = {.phys = CRONUS_ADDR(0x2A28B0)},
.int_level_0_2 = {.phys = CRONUS_ADDR(0x2A28B4)},
.int_level_0_1 = {.phys = CRONUS_ADDR(0x2A28B8)},
.int_level_0_0 = {.phys = CRONUS_ADDR(0x2A28BC)},
.int_docsis_en = {.phys = CRONUS_ADDR(0x2A28F4)},
.mips_pll_setup = {.phys = CRONUS_ADDR(0x1C0000)},
.fs432x4b4_usb_ctl = {.phys = CRONUS_ADDR(0x1C0028)},
.test_bus = {.phys = CRONUS_ADDR(0x1C00CC)},
.crt_spare = {.phys = CRONUS_ADDR(0x1c00d4)},
.usb2_ohci_int_mask = {.phys = CRONUS_ADDR(0x20000C)},
.usb2_strap = {.phys = CRONUS_ADDR(0x200014)},
.ehci_hcapbase = {.phys = CRONUS_ADDR(0x21FE00)},
.ohci_hc_revision = {.phys = CRONUS_ADDR(0x21fc00)},
.bcm1_bs_lmi_steer = {.phys = CRONUS_ADDR(0x2E0008)},
.usb2_control = {.phys = CRONUS_ADDR(0x2E004C)},
.usb2_stbus_obc = {.phys = CRONUS_ADDR(0x21FF00)},
.usb2_stbus_mess_size = {.phys = CRONUS_ADDR(0x21FF04)},
.usb2_stbus_chunk_size = {.phys = CRONUS_ADDR(0x21FF08)},
.pcie_regs = {.phys = CRONUS_ADDR(0x220000)},
.tim_ch = {.phys = CRONUS_ADDR(0x2A2C10)},
.tim_cl = {.phys = CRONUS_ADDR(0x2A2C14)},
.gpio_dout = {.phys = CRONUS_ADDR(0x2A2C20)},
.gpio_din = {.phys = CRONUS_ADDR(0x2A2C24)},
.gpio_dir = {.phys = CRONUS_ADDR(0x2A2C2C)},
.watchdog = {.phys = CRONUS_ADDR(0x2A2C30)},
.front_panel = {.phys = CRONUS_ADDR(0x2A3800)},
};
arch/mips/powertv/asic/asic-gaia.c deleted 100644 → 0
View file @ 1d7bf993
/*
* Locations of devices in the Gaia ASIC
*
* Copyright (C) 2005-2009 Scientific-Atlanta, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*
* Author: David VomLehn
*/
#include <linux/init.h>
#include <asm/mach-powertv/asic.h>
const struct register_map gaia_register_map __initconst = {
.eic_slow0_strt_add = {.phys = GAIA_IO_BASE + 0x000000},
.eic_cfg_bits = {.phys = GAIA_IO_BASE + 0x000038},
.eic_ready_status = {.phys = GAIA_IO_BASE + 0x00004C},
.chipver3 = {.phys = GAIA_IO_BASE + 0x2A0800},
.chipver2 = {.phys = GAIA_IO_BASE + 0x2A0804},
.chipver1 = {.phys = GAIA_IO_BASE + 0x2A0808},
.chipver0 = {.phys = GAIA_IO_BASE + 0x2A080C},
/* The registers of IRBlaster */
.uart1_intstat = {.phys = GAIA_IO_BASE + 0x2A1800},
.uart1_inten = {.phys = GAIA_IO_BASE + 0x2A1804},
.uart1_config1 = {.phys = GAIA_IO_BASE + 0x2A1808},
.uart1_config2 = {.phys = GAIA_IO_BASE + 0x2A180C},
.uart1_divisorhi = {.phys = GAIA_IO_BASE + 0x2A1810},
.uart1_divisorlo = {.phys = GAIA_IO_BASE + 0x2A1814},
.uart1_data = {.phys = GAIA_IO_BASE + 0x2A1818},
.uart1_status = {.phys = GAIA_IO_BASE + 0x2A181C},
.int_stat_3 = {.phys = GAIA_IO_BASE + 0x2A2800},
.int_stat_2 = {.phys = GAIA_IO_BASE + 0x2A2804},
.int_stat_1 = {.phys = GAIA_IO_BASE + 0x2A2808},
.int_stat_0 = {.phys = GAIA_IO_BASE + 0x2A280C},
.int_config = {.phys = GAIA_IO_BASE + 0x2A2810},
.int_int_scan = {.phys = GAIA_IO_BASE + 0x2A2818},
.ien_int_3 = {.phys = GAIA_IO_BASE + 0x2A2830},
.ien_int_2 = {.phys = GAIA_IO_BASE + 0x2A2834},
.ien_int_1 = {.phys = GAIA_IO_BASE + 0x2A2838},
.ien_int_0 = {.phys = GAIA_IO_BASE + 0x2A283C},
.int_level_3_3 = {.phys = GAIA_IO_BASE + 0x2A2880},
.int_level_3_2 = {.phys = GAIA_IO_BASE + 0x2A2884},
.int_level_3_1 = {.phys = GAIA_IO_BASE + 0x2A2888},
.int_level_3_0 = {.phys = GAIA_IO_BASE + 0x2A288C},
.int_level_2_3 = {.phys = GAIA_IO_BASE + 0x2A2890},
.int_level_2_2 = {.phys = GAIA_IO_BASE + 0x2A2894},
.int_level_2_1 = {.phys = GAIA_IO_BASE + 0x2A2898},
.int_level_2_0 = {.phys = GAIA_IO_BASE + 0x2A289C},
.int_level_1_3 = {.phys = GAIA_IO_BASE + 0x2A28A0},
.int_level_1_2 = {.phys = GAIA_IO_BASE + 0x2A28A4},
.int_level_1_1 = {.phys = GAIA_IO_BASE + 0x2A28A8},
.int_level_1_0 = {.phys = GAIA_IO_BASE + 0x2A28AC},
.int_level_0_3 = {.phys = GAIA_IO_BASE + 0x2A28B0},
.int_level_0_2 = {.phys = GAIA_IO_BASE + 0x2A28B4},
.int_level_0_1 = {.phys = GAIA_IO_BASE + 0x2A28B8},
.int_level_0_0 = {.phys = GAIA_IO_BASE + 0x2A28BC},
.int_docsis_en = {.phys = GAIA_IO_BASE + 0x2A28F4},
.mips_pll_setup = {.phys = GAIA_IO_BASE + 0x1C0000},
.fs432x4b4_usb_ctl = {.phys = GAIA_IO_BASE + 0x1C0024},
.test_bus = {.phys = GAIA_IO_BASE + 0x1C00CC},
.crt_spare = {.phys = GAIA_IO_BASE + 0x1c0108},
.usb2_ohci_int_mask = {.phys = GAIA_IO_BASE + 0x20000C},
.usb2_strap = {.phys = GAIA_IO_BASE + 0x200014},
.ehci_hcapbase = {.phys = GAIA_IO_BASE + 0x21FE00},
.ohci_hc_revision = {.phys = GAIA_IO_BASE + 0x21fc00},
.bcm1_bs_lmi_steer = {.phys = GAIA_IO_BASE + 0x2E0004},
.usb2_control = {.phys = GAIA_IO_BASE + 0x2E004C},
.usb2_stbus_obc = {.phys = GAIA_IO_BASE + 0x21FF00},
.usb2_stbus_mess_size = {.phys = GAIA_IO_BASE + 0x21FF04},
.usb2_stbus_chunk_size = {.phys = GAIA_IO_BASE + 0x21FF08},
.pcie_regs = {.phys = GAIA_IO_BASE + 0x220000},
.tim_ch = {.phys = GAIA_IO_BASE + 0x2A2C10},
.tim_cl = {.phys = GAIA_IO_BASE + 0x2A2C14},
.gpio_dout = {.phys = GAIA_IO_BASE + 0x2A2C20},
.gpio_din = {.phys = GAIA_IO_BASE + 0x2A2C24},
.gpio_dir = {.phys = GAIA_IO_BASE + 0x2A2C2C},
.watchdog = {.phys = GAIA_IO_BASE + 0x2A2C30},
.front_panel = {.phys = GAIA_IO_BASE + 0x2A3800},
};
arch/mips/powertv/asic/asic-zeus.c deleted 100644 → 0
View file @ 1d7bf993
/*
* Locations of devices in the Zeus ASIC
*
* Copyright (C) 2005-2009 Scientific-Atlanta, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*
* Author: Ken Eppinett
* David Schleef <ds@schleef.org>
*
* Description: Defines the platform resources for the SA settop.
*/
#include <linux/init.h>
#include <asm/mach-powertv/asic.h>
#define ZEUS_ADDR(x) (ZEUS_IO_BASE + (x))
const struct register_map zeus_register_map __initconst = {
.eic_slow0_strt_add = {.phys = ZEUS_ADDR(0x000000)},
.eic_cfg_bits = {.phys = ZEUS_ADDR(0x000038)},
.eic_ready_status = {.phys = ZEUS_ADDR(0x00004c)},
.chipver3 = {.phys = ZEUS_ADDR(0x280800)},
.chipver2 = {.phys = ZEUS_ADDR(0x280804)},
.chipver1 = {.phys = ZEUS_ADDR(0x280808)},
.chipver0 = {.phys = ZEUS_ADDR(0x28080c)},
/* The registers of IRBlaster */
.uart1_intstat = {.phys = ZEUS_ADDR(0x281800)},
.uart1_inten = {.phys = ZEUS_ADDR(0x281804)},
.uart1_config1 = {.phys = ZEUS_ADDR(0x281808)},
.uart1_config2 = {.phys = ZEUS_ADDR(0x28180C)},
.uart1_divisorhi = {.phys = ZEUS_ADDR(0x281810)},
.uart1_divisorlo = {.phys = ZEUS_ADDR(0x281814)},
.uart1_data = {.phys = ZEUS_ADDR(0x281818)},
.uart1_status = {.phys = ZEUS_ADDR(0x28181C)},
.int_stat_3 = {.phys = ZEUS_ADDR(0x282800)},
.int_stat_2 = {.phys = ZEUS_ADDR(0x282804)},
.int_stat_1 = {.phys = ZEUS_ADDR(0x282808)},
.int_stat_0 = {.phys = ZEUS_ADDR(0x28280c)},
.int_config = {.phys = ZEUS_ADDR(0x282810)},
.int_int_scan = {.phys = ZEUS_ADDR(0x282818)},
.ien_int_3 = {.phys = ZEUS_ADDR(0x282830)},
.ien_int_2 = {.phys = ZEUS_ADDR(0x282834)},
.ien_int_1 = {.phys = ZEUS_ADDR(0x282838)},
.ien_int_0 = {.phys = ZEUS_ADDR(0x28283c)},
.int_level_3_3 = {.phys = ZEUS_ADDR(0x282880)},
.int_level_3_2 = {.phys = ZEUS_ADDR(0x282884)},
.int_level_3_1 = {.phys = ZEUS_ADDR(0x282888)},
.int_level_3_0 = {.phys = ZEUS_ADDR(0x28288c)},
.int_level_2_3 = {.phys = ZEUS_ADDR(0x282890)},
.int_level_2_2 = {.phys = ZEUS_ADDR(0x282894)},
.int_level_2_1 = {.phys = ZEUS_ADDR(0x282898)},
.int_level_2_0 = {.phys = ZEUS_ADDR(0x28289c)},
.int_level_1_3 = {.phys = ZEUS_ADDR(0x2828a0)},
.int_level_1_2 = {.phys = ZEUS_ADDR(0x2828a4)},
.int_level_1_1 = {.phys = ZEUS_ADDR(0x2828a8)},
.int_level_1_0 = {.phys = ZEUS_ADDR(0x2828ac)},
.int_level_0_3 = {.phys = ZEUS_ADDR(0x2828b0)},
.int_level_0_2 = {.phys = ZEUS_ADDR(0x2828b4)},
.int_level_0_1 = {.phys = ZEUS_ADDR(0x2828b8)},
.int_level_0_0 = {.phys = ZEUS_ADDR(0x2828bc)},
.int_docsis_en = {.phys = ZEUS_ADDR(0x2828F4)},
.mips_pll_setup = {.phys = ZEUS_ADDR(0x1a0000)},
.fs432x4b4_usb_ctl = {.phys = ZEUS_ADDR(0x1a0018)},
.test_bus = {.phys = ZEUS_ADDR(0x1a0238)},
.crt_spare = {.phys = ZEUS_ADDR(0x1a0090)},
.usb2_ohci_int_mask = {.phys = ZEUS_ADDR(0x1e000c)},
.usb2_strap = {.phys = ZEUS_ADDR(0x1e0014)},
.ehci_hcapbase = {.phys = ZEUS_ADDR(0x1FFE00)},
.ohci_hc_revision = {.phys = ZEUS_ADDR(0x1FFC00)},
.bcm1_bs_lmi_steer = {.phys = ZEUS_ADDR(0x2C0008)},
.usb2_control = {.phys = ZEUS_ADDR(0x2c01a0)},
.usb2_stbus_obc = {.phys = ZEUS_ADDR(0x1FFF00)},
.usb2_stbus_mess_size = {.phys = ZEUS_ADDR(0x1FFF04)},
.usb2_stbus_chunk_size = {.phys = ZEUS_ADDR(0x1FFF08)},
.pcie_regs = {.phys = ZEUS_ADDR(0x200000)},
.tim_ch = {.phys = ZEUS_ADDR(0x282C10)},
.tim_cl = {.phys = ZEUS_ADDR(0x282C14)},
.gpio_dout = {.phys = ZEUS_ADDR(0x282c20)},
.gpio_din = {.phys = ZEUS_ADDR(0x282c24)},
.gpio_dir = {.phys = ZEUS_ADDR(0x282c2C)},
.watchdog = {.phys = ZEUS_ADDR(0x282c30)},
.front_panel = {.phys = ZEUS_ADDR(0x283800)},
};
arch/mips/powertv/asic/asic_devices.c deleted 100644 → 0
View file @ 1d7bf993
This diff is collapsed.
arch/mips/powertv/asic/asic_int.c deleted 100644 → 0
View file @ 1d7bf993
/*
* Carsten Langgaard, carstenl@mips.com
* Copyright (C) 2000, 2001, 2004 MIPS Technologies, Inc.
* Copyright (C) 2001 Ralf Baechle
* Portions copyright (C) 2009 Cisco Systems, Inc.
*
* This program is free software; you can distribute it and/or modify it
* under the terms of the GNU General Public License (Version 2) as
* published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
* for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
*
* Routines for generic manipulation of the interrupts found on the PowerTV
* platform.
*
* The interrupt controller is located in the South Bridge a PIIX4 device
* with two internal 82C95 interrupt controllers.
*/
#include <linux/init.h>
#include <linux/irq.h>
#include <linux/sched.h>
#include <linux/interrupt.h>
#include <linux/kernel_stat.h>
#include <linux/kernel.h>
#include <linux/random.h>
#include <asm/irq_cpu.h>
#include <linux/io.h>
#include <asm/irq_regs.h>
#include <asm/setup.h>
#include <asm/mips-boards/generic.h>
#include <asm/mach-powertv/asic_regs.h>
static DEFINE_RAW_SPINLOCK(asic_irq_lock);
static inline int get_int(void)
{
unsigned long flags;
int irq;
raw_spin_lock_irqsave(&asic_irq_lock, flags);
irq = (asic_read(int_int_scan) >> 4) - 1;
if (irq == 0 || irq >= NR_IRQS)
irq = -1;
raw_spin_unlock_irqrestore(&asic_irq_lock, flags);
return irq;
}
static void asic_irqdispatch(void)
{
int irq;
irq = get_int();
if (irq < 0)
return; /* interrupt has already been cleared */
do_IRQ(irq);
}
static inline int clz(unsigned long x)
{
__asm__(
" .set push \n"
" .set mips32 \n"
" clz %0, %1 \n"
" .set pop \n"
: "=r" (x)
: "r" (x));
return x;
}
/*
* Version of ffs that only looks at bits 12..15.
*/
static inline unsigned int irq_ffs(unsigned int pending)
{
return fls(pending) - 1 + CAUSEB_IP;
}
/*
* TODO: check how it works under EIC mode.
*/
asmlinkage void plat_irq_dispatch(void)
{
unsigned int pending = read_c0_cause() & read_c0_status() & ST0_IM;
int irq;
irq = irq_ffs(pending);
if (irq == CAUSEF_IP3)
asic_irqdispatch();
else if (irq >= 0)
do_IRQ(irq);
else
spurious_interrupt();
}
void __init arch_init_irq(void)
{
int i;
asic_irq_init();
/*
* Initialize interrupt exception vectors.
*/
if (cpu_has_veic || cpu_has_vint) {
int nvec = cpu_has_veic ? 64 : 8;
for (i = 0; i < nvec; i++)
set_vi_handler(i, asic_irqdispatch);
}
}
arch/mips/powertv/asic/irq_asic.c deleted 100644 → 0
View file @ 1d7bf993
/*
* Portions copyright (C) 2005-2009 Scientific Atlanta
* Portions copyright (C) 2009 Cisco Systems, Inc.
*
* Modified from arch/mips/kernel/irq-rm7000.c:
* Copyright (C) 2003 Ralf Baechle
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/kernel.h>
#include <linux/irq.h>
#include <asm/irq_cpu.h>
#include <asm/mipsregs.h>
#include <asm/mach-powertv/asic_regs.h>
static inline void unmask_asic_irq(struct irq_data *d)
{
unsigned long enable_bit;
unsigned int irq = d->irq;
enable_bit = (1 << (irq & 0x1f));
switch (irq >> 5) {
case 0:
asic_write(asic_read(ien_int_0) | enable_bit, ien_int_0);
break;
case 1:
asic_write(asic_read(ien_int_1) | enable_bit, ien_int_1);
break;
case 2:
asic_write(asic_read(ien_int_2) | enable_bit, ien_int_2);
break;
case 3:
asic_write(asic_read(ien_int_3) | enable_bit, ien_int_3);
break;
default:
BUG();
}
}
static inline void mask_asic_irq(struct irq_data *d)
{
unsigned long disable_mask;
unsigned int irq = d->irq;
disable_mask = ~(1 << (irq & 0x1f));
switch (irq >> 5) {
case 0:
asic_write(asic_read(ien_int_0) & disable_mask, ien_int_0);
break;
case 1:
asic_write(asic_read(ien_int_1) & disable_mask, ien_int_1);
break;
case 2:
asic_write(asic_read(ien_int_2) & disable_mask, ien_int_2);
break;
case 3:
asic_write(asic_read(ien_int_3) & disable_mask, ien_int_3);
break;
default:
BUG();
}
}
static struct irq_chip asic_irq_chip = {
.name = "ASIC Level",
.irq_mask = mask_asic_irq,
.irq_unmask = unmask_asic_irq,
};
void __init asic_irq_init(void)
{
int i;
/* set priority to 0 */
write_c0_status(read_c0_status() & ~(0x0000fc00));
asic_write(0, ien_int_0);
asic_write(0, ien_int_1);
asic_write(0, ien_int_2);
asic_write(0, ien_int_3);
asic_write(0x0fffffff, int_level_3_3);
asic_write(0xffffffff, int_level_3_2);
asic_write(0xffffffff, int_level_3_1);
asic_write(0xffffffff, int_level_3_0);
asic_write(0xffffffff, int_level_2_3);
asic_write(0xffffffff, int_level_2_2);
asic_write(0xffffffff, int_level_2_1);
asic_write(0xffffffff, int_level_2_0);
asic_write(0xffffffff, int_level_1_3);
asic_write(0xffffffff, int_level_1_2);
asic_write(0xffffffff, int_level_1_1);
asic_write(0xffffffff, int_level_1_0);
asic_write(0xffffffff, int_level_0_3);
asic_write(0xffffffff, int_level_0_2);
asic_write(0xffffffff, int_level_0_1);
asic_write(0xffffffff, int_level_0_0);
asic_write(0xf, int_int_scan);
/*
* Initialize interrupt handlers.
*/
for (i = 0; i < NR_IRQS; i++)
irq_set_chip_and_handler(i, &asic_irq_chip, handle_level_irq);
}
arch/mips/powertv/asic/prealloc-calliope.c deleted 100644 → 0
View file @ 1d7bf993
/*
* Memory pre-allocations for Calliope boxes.
*
* Copyright (C) 2005-2009 Scientific-Atlanta, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*
* Author: Ken Eppinett
* David Schleef <ds@schleef.org>
*/
#include <linux/init.h>
#include <linux/ioport.h>
#include <asm/mach-powertv/asic.h>
#include "prealloc.h"
/*
* NON_DVR_CAPABLE CALLIOPE RESOURCES
*/
struct resource non_dvr_calliope_resources[] __initdata =
{
/*
* VIDEO / LX1
*/
/* Delta-Mu 1 image (2MiB) */
PREALLOC_NORMAL("ST231aImage", 0x24000000, 0x24200000-1,
IORESOURCE_MEM)
/* Delta-Mu 1 monitor (8KiB) */
PREALLOC_NORMAL("ST231aMonitor", 0x24200000, 0x24202000-1,
IORESOURCE_MEM)
/* Delta-Mu 1 RAM (~36.9MiB (32MiB - (2MiB + 8KiB))) */
PREALLOC_NORMAL("MediaMemory1", 0x24202000, 0x26700000-1,
IORESOURCE_MEM)
/*
* Sysaudio Driver
*/
/* DSP code and data images (1MiB) */
PREALLOC_NORMAL("DSP_Image_Buff", 0x00000000, 0x00100000-1,
(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
/* ADSC CPU PCM buffer (40KiB) */
PREALLOC_NORMAL("ADSC_CPU_PCM_Buff", 0x00000000, 0x0000A000-1,
(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
/* ADSC AUX buffer (128KiB) */
PREALLOC_NORMAL("ADSC_AUX_Buff", 0x00000000, 0x00020000-1,
(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
/* ADSC Main buffer (128KiB) */
PREALLOC_NORMAL("ADSC_Main_Buff", 0x00000000, 0x00020000-1,
(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
/*
* STAVEM driver/STAPI
*/
/* 6MiB */
PREALLOC_NORMAL("AVMEMPartition0", 0x00000000, 0x00600000-1,
(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
/*
* DOCSIS Subsystem
*/
/* 7MiB */
PREALLOC_DOCSIS("Docsis", 0x27500000, 0x27c00000-1, IORESOURCE_MEM)
/*
* GHW HAL Driver
*/
/* PowerTV Graphics Heap (14MiB) */
PREALLOC_NORMAL("GraphicsHeap", 0x26700000, 0x26700000+(14*1048576)-1,
IORESOURCE_MEM)
/*
* multi com buffer area
*/
/* 128KiB */
PREALLOC_NORMAL("MulticomSHM", 0x23700000, 0x23720000-1,
IORESOURCE_MEM)
/*
* DMA Ring buffer (don't need recording buffers)
*/
/* 680KiB */
PREALLOC_NORMAL("BMM_Buffer", 0x00000000, 0x000AA000-1,
(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
/*
* Display bins buffer for unit0
*/
/* 4KiB */
PREALLOC_NORMAL("DisplayBins0", 0x00000000, 0x00001000-1,
(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
/*
* AVFS: player HAL memory
*/
/* 945K * 3 for playback */
PREALLOC_NORMAL("AvfsDmaMem", 0x00000000, 0x002c4c00-1,
(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
/*
* PMEM
*/
/* Persistent memory for diagnostics (64KiB) */
PREALLOC_PMEM("DiagPersistentMemory", 0x00000000, 0x10000-1,
(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
/*
* Smartcard
*/
/* Read and write buffers for Internal/External cards (10KiB) */
PREALLOC_NORMAL("SmartCardInfo", 0x00000000, 0x2800-1,
(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
/*
* NAND Flash
*/
/* 10KiB */
PREALLOC_NORMAL("NandFlash", NAND_FLASH_BASE, NAND_FLASH_BASE+0x400-1,
IORESOURCE_MEM)
/*
* Synopsys GMAC Memory Region
*/
/* 64KiB */
PREALLOC_NORMAL("GMAC", 0x00000000, 0x00010000-1,
(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
/*
* TFTPBuffer
*
* This buffer is used in some minimal configurations (e.g. two-way
* loader) for storing software images
*/
PREALLOC_TFTP("TFTPBuffer", 0x00000000, MEBIBYTE(80)-1,
(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
/*
* Add other resources here
*/
/*
* End of Resource marker
*/
{
.flags = 0,
},
};
struct resource non_dvr_vze_calliope_resources[] __initdata =
{
/*
* VIDEO / LX1
*/
/* Delta-Mu 1 image (2MiB) */
PREALLOC_NORMAL("ST231aImage", 0x22000000, 0x22200000-1,
IORESOURCE_MEM)
/* Delta-Mu 1 monitor (8KiB) */
PREALLOC_NORMAL("ST231aMonitor", 0x22200000, 0x22202000-1,
IORESOURCE_MEM)
/* Delta-Mu 1 RAM (10.12MiB) */
PREALLOC_NORMAL("MediaMemory1", 0x22202000, 0x22C20B85-1,
IORESOURCE_MEM)
/*
* Sysaudio Driver
*/
/* DSP code and data images (1MiB) */
PREALLOC_NORMAL("DSP_Image_Buff", 0x00000000, 0x00100000-1,
(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
/* ADSC CPU PCM buffer (40KiB) */
PREALLOC_NORMAL("ADSC_CPU_PCM_Buff", 0x00000000, 0x0000A000-1,
(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
/* ADSC AUX buffer (16KiB) */
PREALLOC_NORMAL("ADSC_AUX_Buff", 0x00000000, 0x00004000-1,
(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
/* ADSC Main buffer (16KiB) */
PREALLOC_NORMAL("ADSC_Main_Buff", 0x00000000, 0x00004000-1,
(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
/*
* STAVEM driver/STAPI
*/
/* 3.125MiB */
PREALLOC_NORMAL("AVMEMPartition0", 0x20396000, 0x206B6000-1,
IORESOURCE_MEM)
/*
* GHW HAL Driver
*/
/* PowerTV Graphics Heap (2.59MiB) */
PREALLOC_NORMAL("GraphicsHeap", 0x20100000, 0x20396000-1,
IORESOURCE_MEM)
/*
* multi com buffer area
*/
/* 128KiB */
PREALLOC_NORMAL("MulticomSHM", 0x206B6000, 0x206D6000-1,
IORESOURCE_MEM)
/*
* DMA Ring buffer (don't need recording buffers)
*/
/* 680KiB */
PREALLOC_NORMAL("BMM_Buffer", 0x00000000, 0x000AA000-1,
(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
/*
* Display bins buffer for unit0
*/
/* 4KiB */
PREALLOC_NORMAL("DisplayBins0", 0x00000000, 0x00001000-1,
(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
/*
* PMEM
*/
/* Persistent memory for diagnostics (64KiB) */
PREALLOC_PMEM("DiagPersistentMemory", 0x00000000, 0x10000-1,
(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
/*
* Smartcard
*/
/* Read and write buffers for Internal/External cards (10KiB) */
PREALLOC_NORMAL("SmartCardInfo", 0x00000000, 0x2800-1,
(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
/*
* NAND Flash
*/
/* 10KiB */
PREALLOC_NORMAL("NandFlash", NAND_FLASH_BASE, NAND_FLASH_BASE+0x400-1,
IORESOURCE_MEM)
/*
* Synopsys GMAC Memory Region
*/
/* 64KiB */
PREALLOC_NORMAL("GMAC", 0x00000000, 0x00010000-1,
(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
/*
* Add other resources here
*/
/*
* End of Resource marker
*/
{
.flags = 0,
},
};
struct resource non_dvr_vzf_calliope_resources[] __initdata =
{
/*
* VIDEO / LX1
*/
/* Delta-Mu 1 image (2MiB) */
PREALLOC_NORMAL("ST231aImage", 0x24000000, 0x24200000-1,
IORESOURCE_MEM)
/* Delta-Mu 1 monitor (8KiB) */
PREALLOC_NORMAL("ST231aMonitor", 0x24200000, 0x24202000-1,
IORESOURCE_MEM)
/* Delta-Mu 1 RAM (~19.4 (21.5MiB - (2MiB + 8KiB))) */
PREALLOC_NORMAL("MediaMemory1", 0x24202000, 0x25580000-1,
IORESOURCE_MEM)
/*
* Sysaudio Driver
*/
/* DSP code and data images (1MiB) */
PREALLOC_NORMAL("DSP_Image_Buff", 0x00000000, 0x00100000-1,
(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
/* ADSC CPU PCM buffer (40KiB) */
PREALLOC_NORMAL("ADSC_CPU_PCM_Buff", 0x00000000, 0x0000A000-1,
(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
/* ADSC AUX buffer (128KiB) */
PREALLOC_NORMAL("ADSC_AUX_Buff", 0x00000000, 0x00020000-1,
(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
/* ADSC Main buffer (128KiB) */
PREALLOC_NORMAL("ADSC_Main_Buff", 0x00000000, 0x00020000-1,
(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
/*
* STAVEM driver/STAPI
*/
/* 4.5MiB */
PREALLOC_NORMAL("AVMEMPartition0", 0x00000000, 0x00480000-1,
(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
/*
* GHW HAL Driver
*/
/* PowerTV Graphics Heap (14MiB) */
PREALLOC_NORMAL("GraphicsHeap", 0x25600000, 0x25600000+(14*1048576)-1,
IORESOURCE_MEM)
/*
* multi com buffer area
*/
/* 128KiB */
PREALLOC_NORMAL("MulticomSHM", 0x23700000, 0x23720000-1,
IORESOURCE_MEM)
/*
* DMA Ring buffer (don't need recording buffers)
*/
/* 680KiB */
PREALLOC_NORMAL("BMM_Buffer", 0x00000000, 0x000AA000-1,
(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
/*
* Display bins buffer for unit0
*/
/* 4KiB */
PREALLOC_NORMAL("DisplayBins0", 0x00000000, 0x00001000-1,
(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
/*
* Display bins buffer for unit1
*/
/* 4KiB */
PREALLOC_NORMAL("DisplayBins1", 0x00000000, 0x00001000-1,
(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
/*
* AVFS: player HAL memory
*/
/* 945K * 3 for playback */
PREALLOC_NORMAL("AvfsDmaMem", 0x00000000, 0x002c4c00-1,
(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
/*
* PMEM
*/
/* Persistent memory for diagnostics (64KiB) */
PREALLOC_PMEM("DiagPersistentMemory", 0x00000000, 0x10000-1,
(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
/*
* Smartcard
*/
/* Read and write buffers for Internal/External cards (10KiB) */
PREALLOC_NORMAL("SmartCardInfo", 0x00000000, 0x2800-1,
(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
/*
* NAND Flash
*/
/* 10KiB */
PREALLOC_NORMAL("NandFlash", NAND_FLASH_BASE, NAND_FLASH_BASE+0x400-1,
IORESOURCE_MEM)
/*
* Synopsys GMAC Memory Region
*/
/* 64KiB */
PREALLOC_NORMAL("GMAC", 0x00000000, 0x00010000-1,
(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
/*
* Add other resources here
*/
/*
* End of Resource marker
*/
{
.flags = 0,
},
};
arch/mips/powertv/asic/prealloc-cronus.c deleted 100644 → 0
View file @ 1d7bf993
/*
* Memory pre-allocations for Cronus boxes.
*
* Copyright (C) 2005-2009 Scientific-Atlanta, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*
* Author: Ken Eppinett
* David Schleef <ds@schleef.org>
*/
#include <linux/init.h>
#include <linux/ioport.h>
#include <asm/mach-powertv/asic.h>
#include "prealloc.h"
/*
* DVR_CAPABLE CRONUS RESOURCES
*/
struct resource dvr_cronus_resources[] __initdata =
{
/*
* VIDEO1 / LX1
*/
/* Delta-Mu 1 image (2MiB) */
PREALLOC_NORMAL("ST231aImage", 0x24000000, 0x24200000-1,
IORESOURCE_MEM)
/* Delta-Mu 1 monitor (8KiB) */
PREALLOC_NORMAL("ST231aMonitor", 0x24200000, 0x24202000-1,
IORESOURCE_MEM)
/* Delta-Mu 1 RAM (~29.9MiB (32MiB - (2MiB + 8KiB))) */
PREALLOC_NORMAL("MediaMemory1", 0x24202000, 0x26000000-1,
IORESOURCE_MEM)
/*
* VIDEO2 / LX2
*/
/* Delta-Mu 2 image (2MiB) */
PREALLOC_NORMAL("ST231bImage", 0x60000000, 0x60200000-1,
IORESOURCE_MEM)
/* Delta-Mu 2 monitor (8KiB) */
PREALLOC_NORMAL("ST231bMonitor", 0x60200000, 0x60202000-1,
IORESOURCE_MEM)
/* Delta-Mu 2 RAM (~29.9MiB (32MiB - (2MiB + 8KiB))) */
PREALLOC_NORMAL("MediaMemory2", 0x60202000, 0x62000000-1,
IORESOURCE_MEM)
/*
* Sysaudio Driver
*/
/* DSP code and data images (1MiB) */
PREALLOC_NORMAL("DSP_Image_Buff", 0x00000000, 0x00100000-1,
(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
/* ADSC CPU PCM buffer (40KiB) */
PREALLOC_NORMAL("ADSC_CPU_PCM_Buff", 0x00000000, 0x0000A000-1,
(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
/* ADSC AUX buffer (128KiB) */
PREALLOC_NORMAL("ADSC_AUX_Buff", 0x00000000, 0x00020000-1,
(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
/* ADSC Main buffer (128KiB) */
PREALLOC_NORMAL("ADSC_Main_Buff", 0x00000000, 0x00020000-1,
(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
/*
* STAVEM driver/STAPI
*
* This memory area is used for allocating buffers for Video decoding
* purposes. Allocation/De-allocation within this buffer is managed
* by the STAVMEM driver of the STAPI. They could be Decimated
* Picture Buffers, Intermediate Buffers, as deemed necessary for
* video decoding purposes, for any video decoders on Zeus.
*/
/* 12MiB */
PREALLOC_NORMAL("AVMEMPartition0", 0x00000000, 0x00c00000-1,
IORESOURCE_MEM)
/*
* DOCSIS Subsystem
*/
/* 7MiB */
PREALLOC_DOCSIS("Docsis", 0x67500000, 0x67c00000-1, IORESOURCE_MEM)
/*
* GHW HAL Driver
*/
/* PowerTV Graphics Heap (14MiB) */
PREALLOC_NORMAL("GraphicsHeap", 0x62700000, 0x63500000-1,
IORESOURCE_MEM)
/*
* multi com buffer area
*/
/* 128KiB */
PREALLOC_NORMAL("MulticomSHM", 0x26000000, 0x26020000-1,
IORESOURCE_MEM)
/*
* DMA Ring buffer
*/
PREALLOC_NORMAL("BMM_Buffer", 0x00000000, 0x002EA000-1,
(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
/*
* Display bins buffer for unit0
*/
/* 4KiB */
PREALLOC_NORMAL("DisplayBins0", 0x00000000, 0x00001000-1,
(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
/*
* Display bins buffer for unit1
*/
/* 4KiB */
PREALLOC_NORMAL("DisplayBins1", 0x00000000, 0x00001000-1,
IORESOURCE_MEM)
/*
* ITFS
*/
/* 815,104 bytes each for 2 ITFS partitions. */
PREALLOC_NORMAL("ITFS", 0x00000000, 0x0018E000-1, IORESOURCE_MEM)
/*
* AVFS
*/
/* (945K * 8) = (128K * 3) 5 playbacks / 3 server */
PREALLOC_NORMAL("AvfsDmaMem", 0x00000000, 0x007c2000-1,
IORESOURCE_MEM)
/* 4KiB */
PREALLOC_NORMAL("AvfsFileSys", 0x00000000, 0x00001000-1,
IORESOURCE_MEM)
/*
* PMEM
*/
/* Persistent memory for diagnostics (64KiB) */
PREALLOC_PMEM("DiagPersistentMemory", 0x00000000, 0x10000-1,
(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
/*
* Smartcard
*/
/* Read and write buffers for Internal/External cards (10KiB) */
PREALLOC_NORMAL("SmartCardInfo", 0x00000000, 0x2800-1,
IORESOURCE_MEM)
/*
* KAVNET
*/
/* NP Reset Vector - must be of the form xxCxxxxx (4KiB) */
PREALLOC_NORMAL("NP_Reset_Vector", 0x27c00000, 0x27c01000-1,
IORESOURCE_MEM)
/* NP Image - must be video bank 1 (320KiB) */
PREALLOC_NORMAL("NP_Image", 0x27020000, 0x27070000-1, IORESOURCE_MEM)
/* NP IPC - must be video bank 2 (512KiB) */
PREALLOC_NORMAL("NP_IPC", 0x63500000, 0x63580000-1, IORESOURCE_MEM)
/*
* TFTPBuffer
*
* This buffer is used in some minimal configurations (e.g. two-way
* loader) for storing software images
*/
PREALLOC_TFTP("TFTPBuffer", 0x00000000, MEBIBYTE(80)-1,
(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
/*
* Add other resources here
*/
/*
* End of Resource marker
*/
{
.flags = 0,
},
};
/*
* NON_DVR_CAPABLE CRONUS RESOURCES
*/
struct resource non_dvr_cronus_resources[] __initdata =
{
/*
* VIDEO1 / LX1
*/
/* Delta-Mu 1 image (2MiB) */
PREALLOC_NORMAL("ST231aImage", 0x24000000, 0x24200000-1,
IORESOURCE_MEM)
/* Delta-Mu 1 monitor (8KiB) */
PREALLOC_NORMAL("ST231aMonitor", 0x24200000, 0x24202000-1,
IORESOURCE_MEM)
/* Delta-Mu 1 RAM (~29.9MiB (32MiB - (2MiB + 8KiB))) */
PREALLOC_NORMAL("MediaMemory1", 0x24202000, 0x26000000-1,
IORESOURCE_MEM)
/*
* VIDEO2 / LX2
*/
/* Delta-Mu 2 image (2MiB) */
PREALLOC_NORMAL("ST231bImage", 0x60000000, 0x60200000-1,
IORESOURCE_MEM)
/* Delta-Mu 2 monitor (8KiB) */
PREALLOC_NORMAL("ST231bMonitor", 0x60200000, 0x60202000-1,
IORESOURCE_MEM)
/* Delta-Mu 2 RAM (~29.9MiB (32MiB - (2MiB + 8KiB))) */
PREALLOC_NORMAL("MediaMemory2", 0x60202000, 0x62000000-1,
IORESOURCE_MEM)
/*
* Sysaudio Driver
*/
/* DSP code and data images (1MiB) */
PREALLOC_NORMAL("DSP_Image_Buff", 0x00000000, 0x00100000-1,
(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
/* ADSC CPU PCM buffer (40KiB) */
PREALLOC_NORMAL("ADSC_CPU_PCM_Buff", 0x00000000, 0x0000A000-1,
(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
/* ADSC AUX buffer (128KiB) */
PREALLOC_NORMAL("ADSC_AUX_Buff", 0x00000000, 0x00020000-1,
(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
/* ADSC Main buffer (128KiB) */
PREALLOC_NORMAL("ADSC_Main_Buff", 0x00000000, 0x00020000-1,
(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
/*
* STAVEM driver/STAPI
*
* This memory area is used for allocating buffers for Video decoding
* purposes. Allocation/De-allocation within this buffer is managed
* by the STAVMEM driver of the STAPI. They could be Decimated
* Picture Buffers, Intermediate Buffers, as deemed necessary for
* video decoding purposes, for any video decoders on Zeus.
*/
/* 12MiB */
PREALLOC_NORMAL("AVMEMPartition0", 0x00000000, 0x00c00000-1,
IORESOURCE_MEM)
/*
* DOCSIS Subsystem
*/
/* 7MiB */
PREALLOC_DOCSIS("Docsis", 0x67500000, 0x67c00000-1, IORESOURCE_MEM)
/*
* GHW HAL Driver
*/
/* PowerTV Graphics Heap (14MiB) */
PREALLOC_NORMAL("GraphicsHeap", 0x62700000, 0x63500000-1,
IORESOURCE_MEM)
/*
* multi com buffer area
*/
/* 128KiB */
PREALLOC_NORMAL("MulticomSHM", 0x26000000, 0x26020000-1,
IORESOURCE_MEM)
/*
* DMA Ring buffer (don't need recording buffers)
*/
/* 680KiB */
PREALLOC_NORMAL("BMM_Buffer", 0x00000000, 0x000AA000-1,
(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
/*
* Display bins buffer for unit0
*/
/* 4KiB */
PREALLOC_NORMAL("DisplayBins0", 0x00000000, 0x00001000-1,
(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
/*
* Display bins buffer for unit1
*/
/* 4KiB */
PREALLOC_NORMAL("DisplayBins1", 0x00000000, 0x00001000-1,
IORESOURCE_MEM)
/*
* AVFS: player HAL memory
*/
/* 945K * 3 for playback */
PREALLOC_NORMAL("AvfsDmaMem", 0x00000000, 0x002c4c00-1, IORESOURCE_MEM)
/*
* PMEM
*/
/* Persistent memory for diagnostics (64KiB) */
PREALLOC_PMEM("DiagPersistentMemory", 0x00000000, 0x10000-1,
(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
/*
* Smartcard
*/
/* Read and write buffers for Internal/External cards (10KiB) */
PREALLOC_NORMAL("SmartCardInfo", 0x00000000, 0x2800-1, IORESOURCE_MEM)
/*
* KAVNET
*/
/* NP Reset Vector - must be of the form xxCxxxxx (4KiB) */
PREALLOC_NORMAL("NP_Reset_Vector", 0x27c00000, 0x27c01000-1,
IORESOURCE_MEM)
/* NP Image - must be video bank 1 (320KiB) */
PREALLOC_NORMAL("NP_Image", 0x27020000, 0x27070000-1, IORESOURCE_MEM)
/* NP IPC - must be video bank 2 (512KiB) */
PREALLOC_NORMAL("NP_IPC", 0x63500000, 0x63580000-1, IORESOURCE_MEM)
/*
* NAND Flash
*/
/* 10KiB */
PREALLOC_NORMAL("NandFlash", NAND_FLASH_BASE, NAND_FLASH_BASE+0x400-1,
IORESOURCE_MEM)
/*
* Add other resources here
*/
/*
* End of Resource marker
*/
{
.flags = 0,
},
};
arch/mips/powertv/asic/prealloc-cronuslite.c deleted 100644 → 0
View file @ 1d7bf993
/*
* Memory pre-allocations for Cronus Lite boxes.
*
* Copyright (C) 2005-2009 Scientific-Atlanta, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*
* Author: Ken Eppinett
* David Schleef <ds@schleef.org>
*/
#include <linux/init.h>
#include <linux/ioport.h>
#include <asm/mach-powertv/asic.h>
#include "prealloc.h"
/*
* NON_DVR_CAPABLE CRONUSLITE RESOURCES
*/
struct resource non_dvr_cronuslite_resources[] __initdata =
{
/*
* VIDEO2 / LX2
*/
/* Delta-Mu 1 image (2MiB) */
PREALLOC_NORMAL("ST231aImage", 0x60000000, 0x60200000-1,
IORESOURCE_MEM)
/* Delta-Mu 1 monitor (8KiB) */
PREALLOC_NORMAL("ST231aMonitor", 0x60200000, 0x60202000-1,
IORESOURCE_MEM)
/* Delta-Mu 1 RAM (~29.9MiB (32MiB - (2MiB + 8KiB))) */
PREALLOC_NORMAL("MediaMemory1", 0x60202000, 0x62000000-1,
IORESOURCE_MEM)
/*
* Sysaudio Driver
*/
/* DSP code and data images (1MiB) */
PREALLOC_NORMAL("DSP_Image_Buff", 0x00000000, 0x00100000-1,
(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
/* ADSC CPU PCM buffer (40KiB) */
PREALLOC_NORMAL("ADSC_CPU_PCM_Buff", 0x00000000, 0x0000A000-1,
(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
/* ADSC AUX buffer (128KiB) */
PREALLOC_NORMAL("ADSC_AUX_Buff", 0x00000000, 0x00020000-1,
(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
/* ADSC Main buffer (128KiB) */
PREALLOC_NORMAL("ADSC_Main_Buff", 0x00000000, 0x00020000-1,
(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
/*
* STAVEM driver/STAPI
*
* This memory area is used for allocating buffers for Video decoding
* purposes. Allocation/De-allocation within this buffer is managed
* by the STAVMEM driver of the STAPI. They could be Decimated
* Picture Buffers, Intermediate Buffers, as deemed necessary for
* video decoding purposes, for any video decoders on Zeus.
*/
/* 6MiB */
PREALLOC_NORMAL("AVMEMPartition0", 0x00000000, 0x00600000-1,
IORESOURCE_MEM)
/*
* DOCSIS Subsystem
*/
/* 7MiB */
PREALLOC_DOCSIS("Docsis", 0x67500000, 0x67c00000-1, IORESOURCE_MEM)
/*
* GHW HAL Driver
*/
/* PowerTV Graphics Heap (14MiB) */
PREALLOC_NORMAL("GraphicsHeap", 0x62700000, 0x63500000-1,
IORESOURCE_MEM)
/*
* multi com buffer area
*/
/* 128KiB */
PREALLOC_NORMAL("MulticomSHM", 0x26000000, 0x26020000-1,
IORESOURCE_MEM)
/*
* DMA Ring buffer (don't need recording buffers)
*/
/* 680KiB */
PREALLOC_NORMAL("BMM_Buffer", 0x00000000, 0x000AA000-1,
(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
/*
* Display bins buffer for unit0
*/
/* 4KiB */
PREALLOC_NORMAL("DisplayBins0", 0x00000000, 0x00001000-1,
(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
/*
* Display bins buffer for unit1
*/
/* 4KiB */
PREALLOC_NORMAL("DisplayBins1", 0x00000000, 0x00001000-1,
IORESOURCE_MEM)
/*
* AVFS: player HAL memory
*/
/* 945K * 3 for playback */
PREALLOC_NORMAL("AvfsDmaMem", 0x00000000, 0x002c4c00-1,
(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
/*
* PMEM
*/
/* Persistent memory for diagnostics (64KiB) */
PREALLOC_PMEM("DiagPersistentMemory", 0x00000000, 0x10000-1,
(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
/*
* Smartcard
*/
/* Read and write buffers for Internal/External cards (10KiB) */
PREALLOC_NORMAL("SmartCardInfo", 0x00000000, 0x2800-1, IORESOURCE_MEM)
/*
* KAVNET
*/
/* NP Reset Vector - must be of the form xxCxxxxx (4KiB) */
PREALLOC_NORMAL("NP_Reset_Vector", 0x27c00000, 0x27c01000-1,
IORESOURCE_MEM)
/* NP Image - must be video bank 1 (320KiB) */
PREALLOC_NORMAL("NP_Image", 0x27020000, 0x27070000-1, IORESOURCE_MEM)
/* NP IPC - must be video bank 2 (512KiB) */
PREALLOC_NORMAL("NP_IPC", 0x63500000, 0x63580000-1, IORESOURCE_MEM)
/*
* NAND Flash
*/
/* 10KiB */
PREALLOC_NORMAL("NandFlash", NAND_FLASH_BASE, NAND_FLASH_BASE+0x400-1,
IORESOURCE_MEM)
/*
* TFTPBuffer
*
* This buffer is used in some minimal configurations (e.g. two-way
* loader) for storing software images
*/
PREALLOC_TFTP("TFTPBuffer", 0x00000000, MEBIBYTE(80)-1,
(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
/*
* Add other resources here
*/
/*
* End of Resource marker
*/
{
.flags = 0,
},
};
arch/mips/powertv/asic/prealloc-gaia.c deleted 100644 → 0
View file @ 1d7bf993
This diff is collapsed.
arch/mips/powertv/asic/prealloc-zeus.c deleted 100644 → 0
View file @ 1d7bf993
/*
* Memory pre-allocations for Zeus boxes.
*
* Copyright (C) 2005-2009 Scientific-Atlanta, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*
* Author: Ken Eppinett
* David Schleef <ds@schleef.org>
*/
#include <linux/init.h>
#include <linux/ioport.h>
#include <asm/mach-powertv/asic.h>
#include "prealloc.h"
/*
* DVR_CAPABLE RESOURCES
*/
struct resource dvr_zeus_resources[] __initdata =
{
/*
* VIDEO1 / LX1
*/
/* Delta-Mu 1 image (2MiB) */
PREALLOC_NORMAL("ST231aImage", 0x20000000, 0x20200000-1,
IORESOURCE_MEM)
/* Delta-Mu 1 monitor (8KiB) */
PREALLOC_NORMAL("ST231aMonitor", 0x20200000, 0x20202000-1,
IORESOURCE_MEM)
/* Delta-Mu 1 RAM (~29.9MiB (32MiB - (2MiB + 8KiB))) */
PREALLOC_NORMAL("MediaMemory1", 0x20202000, 0x22000000-1,
IORESOURCE_MEM)
/*
* VIDEO2 / LX2
*/
/* Delta-Mu 2 image (2MiB) */
PREALLOC_NORMAL("ST231bImage", 0x30000000, 0x30200000-1,
IORESOURCE_MEM)
/* Delta-Mu 2 monitor (8KiB) */
PREALLOC_NORMAL("ST231bMonitor", 0x30200000, 0x30202000-1,
IORESOURCE_MEM)
/* Delta-Mu 2 RAM (~29.9MiB (32MiB - (2MiB + 8KiB))) */
PREALLOC_NORMAL("MediaMemory2", 0x30202000, 0x32000000-1,
IORESOURCE_MEM)
/*
* Sysaudio Driver
*/
/* DSP code and data images (1MiB) */
PREALLOC_NORMAL("DSP_Image_Buff", 0x00000000, 0x00100000-1,
(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
/* ADSC CPU PCM buffer (40KiB) */
PREALLOC_NORMAL("ADSC_CPU_PCM_Buff", 0x00000000, 0x0000A000-1,
(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
/* ADSC AUX buffer (16KiB) */
PREALLOC_NORMAL("ADSC_AUX_Buff", 0x00000000, 0x00004000-1,
(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
/* ADSC Main buffer (16KiB) */
PREALLOC_NORMAL("ADSC_Main_Buff", 0x00000000, 0x00004000-1,
(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
/*
* STAVEM driver/STAPI
*
* This memory area is used for allocating buffers for Video decoding
* purposes. Allocation/De-allocation within this buffer is managed
* by the STAVMEM driver of the STAPI. They could be Decimated
* Picture Buffers, Intermediate Buffers, as deemed necessary for
* video decoding purposes, for any video decoders on Zeus.
*/
/* 12MiB */
PREALLOC_NORMAL("AVMEMPartition0", 0x00000000, 0x00c00000-1,
(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
/*
* DOCSIS Subsystem
*/
/* 7MiB */
PREALLOC_DOCSIS("Docsis", 0x40100000, 0x40800000-1, IORESOURCE_MEM)
/*
* GHW HAL Driver
*/
/* PowerTV Graphics Heap (14MiB) */
PREALLOC_NORMAL("GraphicsHeap", 0x46900000, 0x47700000-1,
IORESOURCE_MEM)
/*
* multi com buffer area
*/
/* 128KiB */
PREALLOC_NORMAL("MulticomSHM", 0x47900000, 0x47920000-1,
IORESOURCE_MEM)
/*
* DMA Ring buffer
*/
/* 2.5MiB */
PREALLOC_NORMAL("BMM_Buffer", 0x00000000, 0x00280000-1,
(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
/*
* Display bins buffer for unit0
*/
/* 4KiB */
PREALLOC_NORMAL("DisplayBins0", 0x00000000, 0x00001000-1,
(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
/*
* Display bins buffer for unit1
*/
/* 4KiB */
PREALLOC_NORMAL("DisplayBins1", 0x00000000, 0x00001000-1,
(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
/*
* ITFS
*/
/* 815,104 bytes each for 2 ITFS partitions. */
PREALLOC_NORMAL("ITFS", 0x00000000, 0x0018E000-1,
(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
/*
* AVFS
*/
/* (945K * 8) = (128K * 3) 5 playbacks / 3 server */
PREALLOC_NORMAL("AvfsDmaMem", 0x00000000, 0x007c2000-1,
(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
/* 4KiB */
PREALLOC_NORMAL("AvfsFileSys", 0x00000000, 0x00001000-1,
(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
/*
* PMEM
*/
/* Persistent memory for diagnostics (64KiB) */
PREALLOC_PMEM("DiagPersistentMemory", 0x00000000, 0x10000-1,
(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
/*
* Smartcard
*/
/* Read and write buffers for Internal/External cards (10KiB) */
PREALLOC_NORMAL("SmartCardInfo", 0x00000000, 0x2800-1,
(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
/*
* TFTPBuffer
*
* This buffer is used in some minimal configurations (e.g. two-way
* loader) for storing software images
*/
PREALLOC_TFTP("TFTPBuffer", 0x00000000, MEBIBYTE(80)-1,
(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
/*
* Add other resources here
*/
/*
* End of Resource marker
*/
{
.flags = 0,
},
};
/*
* NON_DVR_CAPABLE ZEUS RESOURCES
*/
struct resource non_dvr_zeus_resources[] __initdata =
{
/*
* VIDEO1 / LX1
*/
/* Delta-Mu 1 image (2MiB) */
PREALLOC_NORMAL("ST231aImage", 0x20000000, 0x20200000-1,
IORESOURCE_MEM)
/* Delta-Mu 1 monitor (8KiB) */
PREALLOC_NORMAL("ST231aMonitor", 0x20200000, 0x20202000-1,
IORESOURCE_MEM)
/* Delta-Mu 1 RAM (~29.9MiB (32MiB - (2MiB + 8KiB))) */
PREALLOC_NORMAL("MediaMemory1", 0x20202000, 0x22000000-1,
IORESOURCE_MEM)
/*
* Sysaudio Driver
*/
/* DSP code and data images (1MiB) */
PREALLOC_NORMAL("DSP_Image_Buff", 0x00000000, 0x00100000-1,
(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
/* ADSC CPU PCM buffer (40KiB) */
PREALLOC_NORMAL("ADSC_CPU_PCM_Buff", 0x00000000, 0x0000A000-1,
(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
/* ADSC AUX buffer (16KiB) */
PREALLOC_NORMAL("ADSC_AUX_Buff", 0x00000000, 0x00004000-1,
(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
/* ADSC Main buffer (16KiB) */
PREALLOC_NORMAL("ADSC_Main_Buff", 0x00000000, 0x00004000-1,
(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
/*
* STAVEM driver/STAPI
*/
/* 6MiB */
PREALLOC_NORMAL("AVMEMPartition0", 0x00000000, 0x00600000-1,
(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
/*
* DOCSIS Subsystem
*/
/* 7MiB */
PREALLOC_DOCSIS("Docsis", 0x40100000, 0x40800000-1, IORESOURCE_MEM)
/*
* GHW HAL Driver
*/
/* PowerTV Graphics Heap (14MiB) */
PREALLOC_NORMAL("GraphicsHeap", 0x46900000, 0x47700000-1,
IORESOURCE_MEM)
/*
* multi com buffer area
*/
/* 128KiB */
PREALLOC_NORMAL("MulticomSHM", 0x47900000, 0x47920000-1,
IORESOURCE_MEM)
/*
* DMA Ring buffer
*/
/* 2.5MiB */
PREALLOC_NORMAL("BMM_Buffer", 0x00000000, 0x00280000-1,
(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
/*
* Display bins buffer for unit0
*/
/* 4KiB */
PREALLOC_NORMAL("DisplayBins0", 0x00000000, 0x00001000-1,
(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
/*
* AVFS: player HAL memory
*/
/* 945K * 3 for playback */
PREALLOC_NORMAL("AvfsDmaMem", 0x00000000, 0x002c4c00-1,
(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
/*
* PMEM
*/
/* Persistent memory for diagnostics (64KiB) */
PREALLOC_PMEM("DiagPersistentMemory", 0x00000000, 0x10000-1,
(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
/*
* Smartcard
*/
/* Read and write buffers for Internal/External cards (10KiB) */
PREALLOC_NORMAL("SmartCardInfo", 0x00000000, 0x2800-1,
(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
/*
* NAND Flash
*/
/* 10KiB */
PREALLOC_NORMAL("NandFlash", NAND_FLASH_BASE, NAND_FLASH_BASE+0x400-1,
IORESOURCE_MEM)
/*
* TFTPBuffer
*
* This buffer is used in some minimal configurations (e.g. two-way
* loader) for storing software images
*/
PREALLOC_TFTP("TFTPBuffer", 0x00000000, MEBIBYTE(80)-1,
(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
/*
* Add other resources here
*/
/*
* End of Resource marker
*/
{
.flags = 0,
},
};
arch/mips/powertv/asic/prealloc.h deleted 100644 → 0
View file @ 1d7bf993
/*
* Definitions for memory preallocations
*
* Copyright (C) 2005-2009 Scientific-Atlanta, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#ifndef _ARCH_MIPS_POWERTV_ASIC_PREALLOC_H
#define _ARCH_MIPS_POWERTV_ASIC_PREALLOC_H
#define KIBIBYTE(n) ((n) * 1024) /* Number of kibibytes */
#define MEBIBYTE(n) ((n) * KIBIBYTE(1024)) /* Number of mebibytes */
/* "struct resource" array element definition */
#define PREALLOC(NAME, START, END, FLAGS) { \
.name = (NAME), \
.start = (START), \
.end = (END), \
.flags = (FLAGS) \
},
/* Individual resources in the preallocated resource arrays are defined using
* macros. These macros are conditionally defined based on their
* corresponding kernel configuration flag:
* - CONFIG_PREALLOC_NORMAL: preallocate resources for a normal settop box
* - CONFIG_PREALLOC_TFTP: preallocate the TFTP download resource
* - CONFIG_PREALLOC_DOCSIS: preallocate the DOCSIS resource
* - CONFIG_PREALLOC_PMEM: reserve space for persistent memory
*/
#ifdef CONFIG_PREALLOC_NORMAL
#define PREALLOC_NORMAL(name, start, end, flags) \
PREALLOC(name, start, end, flags)
#else
#define PREALLOC_NORMAL(name, start, end, flags)
#endif
#ifdef CONFIG_PREALLOC_TFTP
#define PREALLOC_TFTP(name, start, end, flags) \
PREALLOC(name, start, end, flags)
#else
#define PREALLOC_TFTP(name, start, end, flags)
#endif
#ifdef CONFIG_PREALLOC_DOCSIS
#define PREALLOC_DOCSIS(name, start, end, flags) \
PREALLOC(name, start, end, flags)
#else
#define PREALLOC_DOCSIS(name, start, end, flags)
#endif
#ifdef CONFIG_PREALLOC_PMEM
#define PREALLOC_PMEM(name, start, end, flags) \
PREALLOC(name, start, end, flags)
#else
#define PREALLOC_PMEM(name, start, end, flags)
#endif
#endif
arch/mips/powertv/init.c deleted 100644 → 0
View file @ 1d7bf993
/*
* Copyright (C) 1999, 2000, 2004, 2005 MIPS Technologies, Inc.
* All rights reserved.
* Authors: Carsten Langgaard <carstenl@mips.com>
* Maciej W. Rozycki <macro@mips.com>
* Portions copyright (C) 2009 Cisco Systems, Inc.
*
* This program is free software; you can distribute it and/or modify it
* under the terms of the GNU General Public License (Version 2) as
* published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
* for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
*
* PROM library initialisation code.
*/
#include <linux/init.h>
#include <linux/string.h>
#include <linux/kernel.h>
#include <asm/bootinfo.h>
#include <linux/io.h>
#include <asm/cacheflush.h>
#include <asm/traps.h>
#include <asm/mips-boards/generic.h>
#include <asm/mach-powertv/asic.h>
#include "init.h"
static int *_prom_envp;
unsigned long _prom_memsize;
/*
* YAMON (32-bit PROM) pass arguments and environment as 32-bit pointer.
* This macro take care of sign extension, if running in 64-bit mode.
*/
#define prom_envp(index) ((char *)(long)_prom_envp[(index)])
char *prom_getenv(char *envname)
{
char *result = NULL;
if (_prom_envp != NULL) {
/*
* Return a pointer to the given environment variable.
* In 64-bit mode: we're using 64-bit pointers, but all pointers
* in the PROM structures are only 32-bit, so we need some
* workarounds, if we are running in 64-bit mode.
*/
int i, index = 0;
i = strlen(envname);
while (prom_envp(index)) {
if (strncmp(envname, prom_envp(index), i) == 0) {
result = prom_envp(index + 1);
break;
}
index += 2;
}
}
return result;
}
void __init prom_init(void)
{
int prom_argc;
char *prom_argv;
prom_argc = fw_arg0;
prom_argv = (char *) fw_arg1;
_prom_envp = (int *) fw_arg2;
_prom_memsize = (unsigned long) fw_arg3;
if (prom_argc == 1) {
strlcat(arcs_cmdline, " ", COMMAND_LINE_SIZE);
strlcat(arcs_cmdline, prom_argv, COMMAND_LINE_SIZE);
}
configure_platform();
prom_meminit();
}
arch/mips/powertv/init.h deleted 100644 → 0
View file @ 1d7bf993
/*
* Definitions from powertv init.c file
*
* Copyright (C) 2009 Cisco Systems, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*
* Author: David VomLehn
*/
#ifndef _POWERTV_INIT_H
#define _POWERTV_INIT_H
extern unsigned long _prom_memsize;
extern void prom_meminit(void);
extern char *prom_getenv(char *name);
#endif
arch/mips/powertv/ioremap.c deleted 100644 → 0
View file @ 1d7bf993
/*
* ioremap.c
*
* Support for mapping between dma_addr_t values a phys_addr_t values.
*
* Copyright (C) 2005-2009 Scientific-Atlanta, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*
* Author: David VomLehn <dvomlehn@cisco.com>
*
* Description: Defines the platform resources for the SA settop.
*
* NOTE: The bootloader allocates persistent memory at an address which is
* 16 MiB below the end of the highest address in KSEG0. All fixed
* address memory reservations must avoid this region.
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <asm/mach-powertv/ioremap.h>
/*
* Define the sizes of and masks for grains in physical and DMA space. The
* values are the same but the types are not.
*/
#define IOR_PHYS_GRAIN ((phys_addr_t) 1 << IOR_LSBITS)
#define IOR_PHYS_GRAIN_MASK (IOR_PHYS_GRAIN - 1)
#define IOR_DMA_GRAIN ((dma_addr_t) 1 << IOR_LSBITS)
#define IOR_DMA_GRAIN_MASK (IOR_DMA_GRAIN - 1)
/*
* Values that, when accessed by an index derived from a phys_addr_t and
* added to phys_addr_t value, yield a DMA address
*/
struct ior_phys_to_dma _ior_phys_to_dma[IOR_NUM_PHYS_TO_DMA];
EXPORT_SYMBOL(_ior_phys_to_dma);
/*
* Values that, when accessed by an index derived from a dma_addr_t and
* added to that dma_addr_t value, yield a physical address
*/
struct ior_dma_to_phys _ior_dma_to_phys[IOR_NUM_DMA_TO_PHYS];
EXPORT_SYMBOL(_ior_dma_to_phys);
/**
* setup_dma_to_phys - set up conversion from DMA to physical addresses
* @dma_idx: Top IOR_LSBITS bits of the DMA address, i.e. an index
* into the array _dma_to_phys.
* @delta: Value that, when added to the DMA address, will yield the
* physical address
* @s: Number of bytes in the section of memory with the given delta
* between DMA and physical addresses.
*/
static void setup_dma_to_phys(dma_addr_t dma, phys_addr_t delta, dma_addr_t s)
{
int dma_idx, first_idx, last_idx;
phys_addr_t first, last;
/*
* Calculate the first and last indices, rounding the first up and
* the second down.
*/
first = dma & ~IOR_DMA_GRAIN_MASK;
last = (dma + s - 1) & ~IOR_DMA_GRAIN_MASK;
first_idx = first >> IOR_LSBITS; /* Convert to indices */
last_idx = last >> IOR_LSBITS;
for (dma_idx = first_idx; dma_idx <= last_idx; dma_idx++)
_ior_dma_to_phys[dma_idx].offset = delta >> IOR_DMA_SHIFT;
}
/**
* setup_phys_to_dma - set up conversion from DMA to physical addresses
* @phys_idx: Top IOR_LSBITS bits of the DMA address, i.e. an index
* into the array _phys_to_dma.
* @delta: Value that, when added to the DMA address, will yield the
* physical address
* @s: Number of bytes in the section of memory with the given delta
* between DMA and physical addresses.
*/
static void setup_phys_to_dma(phys_addr_t phys, dma_addr_t delta, phys_addr_t s)
{
int phys_idx, first_idx, last_idx;
phys_addr_t first, last;
/*
* Calculate the first and last indices, rounding the first up and
* the second down.
*/
first = phys & ~IOR_PHYS_GRAIN_MASK;
last = (phys + s - 1) & ~IOR_PHYS_GRAIN_MASK;
first_idx = first >> IOR_LSBITS; /* Convert to indices */
last_idx = last >> IOR_LSBITS;
for (phys_idx = first_idx; phys_idx <= last_idx; phys_idx++)
_ior_phys_to_dma[phys_idx].offset = delta >> IOR_PHYS_SHIFT;
}
/**
* ioremap_add_map - add to the physical and DMA address conversion arrays
* @phys: Process's view of the address of the start of the memory chunk
* @dma: DMA address of the start of the memory chunk
* @size: Size, in bytes, of the chunk of memory
*
* NOTE: It might be obvious, but the assumption is that all @size bytes have
* the same offset between the physical address and the DMA address.
*/
void ioremap_add_map(phys_addr_t phys, phys_addr_t dma, phys_addr_t size)
{
if (size == 0)
return;
if ((dma & IOR_DMA_GRAIN_MASK) != 0 ||
(phys & IOR_PHYS_GRAIN_MASK) != 0 ||
(size & IOR_PHYS_GRAIN_MASK) != 0)
pr_crit("Memory allocation must be in chunks of 0x%x bytes\n",
IOR_PHYS_GRAIN);
setup_dma_to_phys(dma, phys - dma, size);
setup_phys_to_dma(phys, dma - phys, size);
}
arch/mips/powertv/memory.c deleted 100644 → 0
View file @ 1d7bf993
This diff is collapsed.
arch/mips/powertv/pci/Makefile deleted 100644 → 0
View file @ 1d7bf993
#
# Copyright (C) 2009 Scientific-Atlanta, Inc.
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
#
obj-$(CONFIG_PCI) += fixup-powertv.o
arch/mips/powertv/pci/fixup-powertv.c deleted 100644 → 0
View file @ 1d7bf993
#include <linux/init.h>
#include <linux/export.h>
#include <linux/pci.h>
#include <asm/mach-powertv/interrupts.h>
#include "powertv-pci.h"
int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
return asic_pcie_map_irq(dev, slot, pin);
}
/* Do platform specific device initialization at pci_enable_device() time */
int pcibios_plat_dev_init(struct pci_dev *dev)
{
return 0;
}
/*
* asic_pcie_map_irq
*
* Parameters:
* *dev - pointer to a pci_dev structure (not used)
* slot - slot number (not used)
* pin - pin number (not used)
*
* Return Value:
* Returns: IRQ number (always the PCI Express IRQ number)
*
* Description:
* asic_pcie_map_irq will return the IRQ number of the PCI Express interrupt.
*
*/
int asic_pcie_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
return irq_pciexp;
}
EXPORT_SYMBOL(asic_pcie_map_irq);
arch/mips/powertv/pci/powertv-pci.h deleted 100644 → 0
View file @ 1d7bf993
/*
* powertv-pci.c
*
* Copyright (C) 2009 Cisco Systems, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
/*
* Local definitions for the powertv PCI code
*/
#ifndef _POWERTV_PCI_POWERTV_PCI_H_
#define _POWERTV_PCI_POWERTV_PCI_H_
extern int asic_pcie_map_irq(const struct pci_dev *dev, u8 slot, u8 pin);
extern int asic_pcie_init(void);
extern int asic_pcie_init(void);
extern int log_level;
#endif
arch/mips/powertv/powertv-clock.h deleted 100644 → 0
View file @ 1d7bf993
/*
* Copyright (C) 2009 Cisco Systems, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*
* Author: David VomLehn
*/
#ifndef _POWERTV_POWERTV_CLOCK_H
#define _POWERTV_POWERTV_CLOCK_H
extern int powertv_clockevent_init(void);
extern void powertv_clocksource_init(void);
extern unsigned int mips_get_pll_freq(void);
#endif
arch/mips/powertv/powertv-usb.c deleted 100644 → 0
View file @ 1d7bf993
This diff is collapsed.
arch/mips/powertv/powertv_setup.c deleted 100644 → 0
View file @ 1d7bf993
This diff is collapsed.
arch/mips/powertv/reset.c deleted 100644 → 0
View file @ 1d7bf993
/*
* Carsten Langgaard, carstenl@mips.com
* Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved.
* Portions copyright (C) 2009 Cisco Systems, Inc.
*
* This program is free software; you can distribute it and/or modify it
* under the terms of the GNU General Public License (Version 2) as
* published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
* for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
*/
#include <linux/pm.h>
#include <linux/io.h>
#include <asm/reboot.h> /* Not included by linux/reboot.h */
#include <asm/mach-powertv/asic_regs.h>
#include "reset.h"
static void mips_machine_restart(char *command)
{
writel(0x1, asic_reg_addr(watchdog));
}
void mips_reboot_setup(void)
{
_machine_restart = mips_machine_restart;
}
arch/mips/powertv/reset.h deleted 100644 → 0
View file @ 1d7bf993
/*
* Definitions from powertv reset.c file
*
* Copyright (C) 2009 Cisco Systems, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*
* Author: David VomLehn
*/
#ifndef _POWERTV_POWERTV_RESET_H
#define _POWERTV_POWERTV_RESET_H
extern void mips_reboot_setup(void);
#endif
arch/mips/powertv/time.c deleted 100644 → 0
View file @ 1d7bf993
/*
* Carsten Langgaard, carstenl@mips.com
* Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved.
* Portions copyright (C) 2009 Cisco Systems, Inc.
*
* This program is free software; you can distribute it and/or modify it
* under the terms of the GNU General Public License (Version 2) as
* published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
* for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
*
* Setting up the clock on the MIPS boards.
*/
#include <linux/init.h>
#include <asm/mach-powertv/interrupts.h>
#include <asm/time.h>
#include "powertv-clock.h"
unsigned int get_c0_compare_int(void)
{
return irq_mips_timer;
}
void __init plat_time_init(void)
{
powertv_clocksource_init();
}
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7