Skip to content

L
linux
Commit a71efd61 authored by Olof Johansson's avatar Olof Johansson
Browse files
Options

Merge branch 'at91/soc' into late/cleanup 

* at91/soc:
  ARM: at91: add defconfig for SAMA5
  ARM: at91: dt: add device tree files for SAMA5D3 family
  ARM: at91: introduce SAMA5 support
  ARM: at91: introduce the core type choice to split ARMv4/5 and ARMv7 arch
  ARM: at91: add AT91_SAM9_TIME entry to select at91sam926x_time.c compilation
  ARM: at91: change name template in AT91_SOC_START macro
  ARM: at91: renamme rm9200 dt file
  ARM: at91: rename board-dt to more specific name board-dt-sam9
  ARM: at91: move non DT Kconfig to Kconfig.non_dt
parents cd4cb1a7 471c9e78
Show whitespace changes
Inline Side-by-side
Showing with 2891 additions and 443 deletions
arch/arm/boot/dts/Makefile
View file @ a71efd61
......@@ -31,6 +31,11 @@ dtb-$(CONFIG_ARCH_AT91) += at91sam9g25ek.dtb
dtb-$(CONFIG_ARCH_AT91) += at91sam9g35ek.dtb
dtb-$(CONFIG_ARCH_AT91) += at91sam9x25ek.dtb
dtb-$(CONFIG_ARCH_AT91) += at91sam9x35ek.dtb
# sama5d3
dtb-$(CONFIG_ARCH_AT91) += sama5d31ek.dtb
dtb-$(CONFIG_ARCH_AT91) += sama5d33ek.dtb
dtb-$(CONFIG_ARCH_AT91) += sama5d34ek.dtb
dtb-$(CONFIG_ARCH_AT91) += sama5d35ek.dtb
dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb
dtb-$(CONFIG_ARCH_BCM) += bcm11351-brt.dtb
......
arch/arm/boot/dts/sama5d3.dtsi 0 → 100644
View file @ a71efd61
/*
* sama5d3.dtsi - Device Tree Include file for SAMA5D3 family SoC
* applies to SAMA5D31, SAMA5D33, SAMA5D34, SAMA5D35 SoC
*
* Copyright (C) 2013 Atmel,
* 2013 Ludovic Desroches <ludovic.desroches@atmel.com>
*
* Licensed under GPLv2 or later.
*/
/include/ "skeleton.dtsi"
/ {
model = "Atmel SAMA5D3 family SoC";
compatible = "atmel,sama5d3", "atmel,sama5";
interrupt-parent = <&aic>;
aliases {
serial0 = &dbgu;
serial1 = &usart0;
serial2 = &usart1;
serial3 = &usart2;
serial4 = &usart3;
gpio0 = &pioA;
gpio1 = &pioB;
gpio2 = &pioC;
gpio3 = &pioD;
gpio4 = &pioE;
tcb0 = &tcb0;
tcb1 = &tcb1;
i2c0 = &i2c0;
i2c1 = &i2c1;
i2c2 = &i2c2;
ssc0 = &ssc0;
ssc1 = &ssc1;
};
cpus {
cpu@0 {
compatible = "arm,cortex-a5";
};
};
memory {
reg = <0x20000000 0x8000000>;
};
ahb {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges;
apb {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges;
mmc0: mmc@f0000000 {
compatible = "atmel,hsmci";
reg = <0xf0000000 0x600>;
interrupts = <21 4 0>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_dat4_7>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
spi0: spi@f0004000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "atmel,at91sam9x5-spi";
reg = <0xf0004000 0x100>;
interrupts = <24 4 3>;
cs-gpios = <&pioD 13 0
&pioD 14 0 /* conflicts with SCK0 and CANRX0 */
&pioD 15 0 /* conflicts with CTS0 and CANTX0 */
&pioD 16 0 /* conflicts with RTS0 and PWMFI3 */
>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi0>;
status = "disabled";
};
ssc0: ssc@f0008000 {
compatible = "atmel,at91sam9g45-ssc";
reg = <0xf0008000 0x4000>;
interrupts = <38 4 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
status = "disabled";
};
can0: can@f000c000 {
compatible = "atmel,at91sam9x5-can";
reg = <0xf000c000 0x300>;
interrupts = <40 4 3>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_can0_rx_tx>;
status = "disabled";
};
tcb0: timer@f0010000 {
compatible = "atmel,at91sam9x5-tcb";
reg = <0xf0010000 0x100>;
interrupts = <26 4 0>;
};
i2c0: i2c@f0014000 {
compatible = "atmel,at91sam9x5-i2c";
reg = <0xf0014000 0x4000>;
interrupts = <18 4 6>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c0>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
i2c1: i2c@f0018000 {
compatible = "atmel,at91sam9x5-i2c";
reg = <0xf0018000 0x4000>;
interrupts = <19 4 6>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c1>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
usart0: serial@f001c000 {
compatible = "atmel,at91sam9260-usart";
reg = <0xf001c000 0x100>;
interrupts = <12 4 5>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usart0>;
status = "disabled";
};
usart1: serial@f0020000 {
compatible = "atmel,at91sam9260-usart";
reg = <0xf0020000 0x100>;
interrupts = <13 4 5>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usart1>;
status = "disabled";
};
macb0: ethernet@f0028000 {
compatible = "cnds,pc302-gem", "cdns,gem";
reg = <0xf0028000 0x100>;
interrupts = <34 4 3>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_macb0_data_rgmii &pinctrl_macb0_signal_rgmii>;
status = "disabled";
};
isi: isi@f0034000 {
compatible = "atmel,at91sam9g45-isi";
reg = <0xf0034000 0x4000>;
interrupts = <37 4 5>;
status = "disabled";
};
mmc1: mmc@f8000000 {
compatible = "atmel,hsmci";
reg = <0xf8000000 0x600>;
interrupts = <22 4 0>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
mmc2: mmc@f8004000 {
compatible = "atmel,hsmci";
reg = <0xf8004000 0x600>;
interrupts = <23 4 0>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_mmc2_clk_cmd_dat0 &pinctrl_mmc2_dat1_3>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
spi1: spi@f8008000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "atmel,at91sam9x5-spi";
reg = <0xf8008000 0x100>;
interrupts = <25 4 3>;
cs-gpios = <&pioC 25 0
&pioC 26 0 /* conflitcs with TWD1 and ISI_D11 */
&pioC 27 0 /* conflitcs with TWCK1 and ISI_D10 */
&pioC 28 0 /* conflitcs with PWMFI0 and ISI_D9 */
>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi1>;
status = "disabled";
};
ssc1: ssc@f800c000 {
compatible = "atmel,at91sam9g45-ssc";
reg = <0xf800c000 0x4000>;
interrupts = <39 4 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>;
status = "disabled";
};
can1: can@f8010000 {
compatible = "atmel,at91sam9x5-can";
reg = <0xf8010000 0x300>;
interrupts = <41 4 3>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_can1_rx_tx>;
};
tcb1: timer@f8014000 {
compatible = "atmel,at91sam9x5-tcb";
reg = <0xf8014000 0x100>;
interrupts = <27 4 0>;
};
adc0: adc@f8018000 {
compatible = "atmel,at91sam9260-adc";
reg = <0xf8018000 0x100>;
interrupts = <29 4 5>;
pinctrl-names = "default";
pinctrl-0 = <
&pinctrl_adc0_adtrg
&pinctrl_adc0_ad0
&pinctrl_adc0_ad1
&pinctrl_adc0_ad2
&pinctrl_adc0_ad3
&pinctrl_adc0_ad4
&pinctrl_adc0_ad5
&pinctrl_adc0_ad6
&pinctrl_adc0_ad7
&pinctrl_adc0_ad8
&pinctrl_adc0_ad9
&pinctrl_adc0_ad10
&pinctrl_adc0_ad11
>;
atmel,adc-channel-base = <0x50>;
atmel,adc-channels-used = <0xfff>;
atmel,adc-drdy-mask = <0x1000000>;
atmel,adc-num-channels = <12>;
atmel,adc-startup-time = <40>;
atmel,adc-status-register = <0x30>;
atmel,adc-trigger-register = <0xc0>;
atmel,adc-use-external;
atmel,adc-vref = <3000>;
atmel,adc-res = <10 12>;
atmel,adc-res-names = "lowres", "highres";
status = "disabled";
trigger@0 {
trigger-name = "external-rising";
trigger-value = <0x1>;
trigger-external;
};
trigger@1 {
trigger-name = "external-falling";
trigger-value = <0x2>;
trigger-external;
};
trigger@2 {
trigger-name = "external-any";
trigger-value = <0x3>;
trigger-external;
};
trigger@3 {
trigger-name = "continuous";
trigger-value = <0x6>;
};
};
tsadcc: tsadcc@f8018000 {
compatible = "atmel,at91sam9x5-tsadcc";
reg = <0xf8018000 0x4000>;
interrupts = <29 4 5>;
atmel,tsadcc_clock = <300000>;
atmel,filtering_average = <0x03>;
atmel,pendet_debounce = <0x08>;
atmel,pendet_sensitivity = <0x02>;
atmel,ts_sample_hold_time = <0x0a>;
status = "disabled";
};
i2c2: i2c@f801c000 {
compatible = "atmel,at91sam9x5-i2c";
reg = <0xf801c000 0x4000>;
interrupts = <20 4 6>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
usart2: serial@f8020000 {
compatible = "atmel,at91sam9260-usart";
reg = <0xf8020000 0x100>;
interrupts = <14 4 5>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usart2>;
status = "disabled";
};
usart3: serial@f8024000 {
compatible = "atmel,at91sam9260-usart";
reg = <0xf8024000 0x100>;
interrupts = <15 4 5>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usart3>;
status = "disabled";
};
macb1: ethernet@f802c000 {
compatible = "cdns,at32ap7000-macb", "cdns,macb";
reg = <0xf802c000 0x100>;
interrupts = <35 4 3>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_macb1_rmii>;
status = "disabled";
};
sha@f8034000 {
compatible = "atmel,sam9g46-sha";
reg = <0xf8034000 0x100>;
interrupts = <42 4 0>;
};
aes@f8038000 {
compatible = "atmel,sam9g46-aes";
reg = <0xf8038000 0x100>;
interrupts = <43 4 0>;
};
tdes@f803c000 {
compatible = "atmel,sam9g46-tdes";
reg = <0xf803c000 0x100>;
interrupts = <44 4 0>;
};
dma0: dma-controller@ffffe600 {
compatible = "atmel,at91sam9g45-dma";
reg = <0xffffe600 0x200>;
interrupts = <30 4 0>;
#dma-cells = <1>;
};
dma1: dma-controller@ffffe800 {
compatible = "atmel,at91sam9g45-dma";
reg = <0xffffe800 0x200>;
interrupts = <31 4 0>;
#dma-cells = <1>;
};
ramc0: ramc@ffffea00 {
compatible = "atmel,at91sam9g45-ddramc";
reg = <0xffffea00 0x200>;
};
dbgu: serial@ffffee00 {
compatible = "atmel,at91sam9260-usart";
reg = <0xffffee00 0x200>;
interrupts = <2 4 7>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_dbgu>;
status = "disabled";
};
aic: interrupt-controller@fffff000 {
#interrupt-cells = <3>;
compatible = "atmel,sama5d3-aic";
interrupt-controller;
reg = <0xfffff000 0x200>;
atmel,external-irqs = <47>;
};
pinctrl@fffff200 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "atmel,at91sam9x5-pinctrl", "atmel,at91rm9200-pinctrl", "simple-bus";
ranges = <0xfffff200 0xfffff200 0xa00>;
atmel,mux-mask = <
/* A B C */
0xffffffff 0xc0fc0000 0xc0ff0000 /* pioA */
0xffffffff 0x0ff8ffff 0x00000000 /* pioB */
0xffffffff 0xbc00f1ff 0x7c00fc00 /* pioC */
0xffffffff 0xc001c0e0 0x0001c1e0 /* pioD */
0xffffffff 0xbf9f8000 0x18000000 /* pioE */
>;
/* shared pinctrl settings */
adc0 {
pinctrl_adc0_adtrg: adc0_adtrg {
atmel,pins =
<3 19 0x1 0x0>; /* PD19 periph A ADTRG */
};
pinctrl_adc0_ad0: adc0_ad0 {
atmel,pins =
<3 20 0x1 0x0>; /* PD20 periph A AD0 */
};
pinctrl_adc0_ad1: adc0_ad1 {
atmel,pins =
<3 21 0x1 0x0>; /* PD21 periph A AD1 */
};
pinctrl_adc0_ad2: adc0_ad2 {
atmel,pins =
<3 22 0x1 0x0>; /* PD22 periph A AD2 */
};
pinctrl_adc0_ad3: adc0_ad3 {
atmel,pins =
<3 23 0x1 0x0>; /* PD23 periph A AD3 */
};
pinctrl_adc0_ad4: adc0_ad4 {
atmel,pins =
<3 24 0x1 0x0>; /* PD24 periph A AD4 */
};
pinctrl_adc0_ad5: adc0_ad5 {
atmel,pins =
<3 25 0x1 0x0>; /* PD25 periph A AD5 */
};
pinctrl_adc0_ad6: adc0_ad6 {
atmel,pins =
<3 26 0x1 0x0>; /* PD26 periph A AD6 */
};
pinctrl_adc0_ad7: adc0_ad7 {
atmel,pins =
<3 27 0x1 0x0>; /* PD27 periph A AD7 */
};
pinctrl_adc0_ad8: adc0_ad8 {
atmel,pins =
<3 28 0x1 0x0>; /* PD28 periph A AD8 */
};
pinctrl_adc0_ad9: adc0_ad9 {
atmel,pins =
<3 29 0x1 0x0>; /* PD29 periph A AD9 */
};
pinctrl_adc0_ad10: adc0_ad10 {
atmel,pins =
<3 30 0x1 0x0>; /* PD30 periph A AD10, conflicts with PCK0 */
};
pinctrl_adc0_ad11: adc0_ad11 {
atmel,pins =
<3 31 0x1 0x0>; /* PD31 periph A AD11, conflicts with PCK1 */
};
};
can0 {
pinctrl_can0_rx_tx: can0_rx_tx {
atmel,pins =
<3 14 0x3 0x0 /* PD14 periph C RX, conflicts with SCK0, SPI0_NPCS1 */
3 15 0x3 0x0>; /* PD15 periph C TX, conflicts with CTS0, SPI0_NPCS2 */
};
};
can1 {
pinctrl_can1_rx_tx: can1_rx_tx {
atmel,pins =
<1 14 0x2 0x0 /* PB14 periph B RX, conflicts with GCRS */
1 15 0x2 0x0>; /* PB15 periph B TX, conflicts with GCOL */
};
};
dbgu {
pinctrl_dbgu: dbgu-0 {
atmel,pins =
<1 30 0x1 0x0 /* PB30 periph A */
1 31 0x1 0x1>; /* PB31 periph A with pullup */
};
};
i2c0 {
pinctrl_i2c0: i2c0-0 {
atmel,pins =
<0 30 0x1 0x0 /* PA30 periph A TWD0 pin, conflicts with URXD1, ISI_VSYNC */
0 31 0x1 0x0>; /* PA31 periph A TWCK0 pin, conflicts with UTXD1, ISI_HSYNC */
};
};
i2c1 {
pinctrl_i2c1: i2c1-0 {
atmel,pins =
<2 26 0x2 0x0 /* PC26 periph B TWD1 pin, conflicts with SPI1_NPCS1, ISI_D11 */
2 27 0x2 0x0>; /* PC27 periph B TWCK1 pin, conflicts with SPI1_NPCS2, ISI_D10 */
};
};
isi {
pinctrl_isi: isi-0 {
atmel,pins =
<0 16 0x3 0x0 /* PA16 periph C ISI_D0, conflicts with LCDDAT16 */
0 17 0x3 0x0 /* PA17 periph C ISI_D1, conflicts with LCDDAT17 */
0 18 0x3 0x0 /* PA18 periph C ISI_D2, conflicts with LCDDAT18, TWD2 */
0 19 0x3 0x0 /* PA19 periph C ISI_D3, conflicts with LCDDAT19, TWCK2 */
0 20 0x3 0x0 /* PA20 periph C ISI_D4, conflicts with LCDDAT20, PWMH0 */
0 21 0x3 0x0 /* PA21 periph C ISI_D5, conflicts with LCDDAT21, PWML0 */
0 22 0x3 0x0 /* PA22 periph C ISI_D6, conflicts with LCDDAT22, PWMH1 */
0 23 0x3 0x0 /* PA23 periph C ISI_D7, conflicts with LCDDAT23, PWML1 */
2 30 0x3 0x0 /* PC30 periph C ISI_PCK, conflicts with UTXD0 */
0 31 0x3 0x0 /* PA31 periph C ISI_HSYNC, conflicts with TWCK0, UTXD1 */
0 30 0x3 0x0 /* PA30 periph C ISI_VSYNC, conflicts with TWD0, URXD1 */
2 29 0x3 0x0 /* PC29 periph C ISI_PD8, conflicts with URXD0, PWMFI2 */
2 28 0x3 0x0>; /* PC28 periph C ISI_PD9, conflicts with SPI1_NPCS3, PWMFI0 */
};
pinctrl_isi_pck_as_mck: isi_pck_as_mck-0 {
atmel,pins =
<3 31 0x2 0x0>; /* PD31 periph B ISI_MCK */
};
};
lcd {
pinctrl_lcd: lcd-0 {
atmel,pins =
<0 24 0x1 0x0 /* PA24 periph A LCDPWM */
0 26 0x1 0x0 /* PA26 periph A LCDVSYNC */
0 27 0x1 0x0 /* PA27 periph A LCDHSYNC */
0 25 0x1 0x0 /* PA25 periph A LCDDISP */
0 29 0x1 0x0 /* PA29 periph A LCDDEN */
0 28 0x1 0x0 /* PA28 periph A LCDPCK */
0 0 0x1 0x0 /* PA0 periph A LCDD0 pin */
0 1 0x1 0x0 /* PA1 periph A LCDD1 pin */
0 2 0x1 0x0 /* PA2 periph A LCDD2 pin */
0 3 0x1 0x0 /* PA3 periph A LCDD3 pin */
0 4 0x1 0x0 /* PA4 periph A LCDD4 pin */
0 5 0x1 0x0 /* PA5 periph A LCDD5 pin */
0 6 0x1 0x0 /* PA6 periph A LCDD6 pin */
0 7 0x1 0x0 /* PA7 periph A LCDD7 pin */
0 8 0x1 0x0 /* PA8 periph A LCDD8 pin */
0 9 0x1 0x0 /* PA9 periph A LCDD9 pin */
0 10 0x1 0x0 /* PA10 periph A LCDD10 pin */
0 11 0x1 0x0 /* PA11 periph A LCDD11 pin */
0 12 0x1 0x0 /* PA12 periph A LCDD12 pin */
0 13 0x1 0x0 /* PA13 periph A LCDD13 pin */
0 14 0x1 0x0 /* PA14 periph A LCDD14 pin */
0 15 0x1 0x0 /* PA15 periph A LCDD15 pin */
2 14 0x3 0x0 /* PC14 periph C LCDD16 pin */
2 13 0x3 0x0 /* PC13 periph C LCDD17 pin */
2 12 0x3 0x0 /* PC12 periph C LCDD18 pin */
2 11 0x3 0x0 /* PC11 periph C LCDD19 pin */
2 10 0x3 0x0 /* PC10 periph C LCDD20 pin */
2 15 0x3 0x0 /* PC15 periph C LCDD21 pin */
4 27 0x3 0x0 /* PE27 periph C LCDD22 pin */
4 28 0x3 0x0>; /* PE28 periph C LCDD23 pin */
};
};
macb0 {
pinctrl_macb0_data_rgmii: macb0_data_rgmii {
atmel,pins =
<1 0 0x1 0x0 /* PB0 periph A GTX0, conflicts with PWMH0 */
1 1 0x1 0x0 /* PB1 periph A GTX1, conflicts with PWML0 */
1 2 0x1 0x0 /* PB2 periph A GTX2, conflicts with TK1 */
1 3 0x1 0x0 /* PB3 periph A GTX3, conflicts with TF1 */
1 4 0x1 0x0 /* PB4 periph A GRX0, conflicts with PWMH1 */
1 5 0x1 0x0 /* PB5 periph A GRX1, conflicts with PWML1 */
1 6 0x1 0x0 /* PB6 periph A GRX2, conflicts with TD1 */
1 7 0x1 0x0>; /* PB7 periph A GRX3, conflicts with RK1 */
};
pinctrl_macb0_data_gmii: macb0_data_gmii {
atmel,pins =
<1 19 0x2 0x0 /* PB19 periph B GTX4, conflicts with MCI1_CDA */
1 20 0x2 0x0 /* PB20 periph B GTX5, conflicts with MCI1_DA0 */
1 21 0x2 0x0 /* PB21 periph B GTX6, conflicts with MCI1_DA1 */
1 22 0x2 0x0 /* PB22 periph B GTX7, conflicts with MCI1_DA2 */
1 23 0x2 0x0 /* PB23 periph B GRX4, conflicts with MCI1_DA3 */
1 24 0x2 0x0 /* PB24 periph B GRX5, conflicts with MCI1_CK */
1 25 0x2 0x0 /* PB25 periph B GRX6, conflicts with SCK1 */
1 26 0x2 0x0>; /* PB26 periph B GRX7, conflicts with CTS1 */
};
pinctrl_macb0_signal_rgmii: macb0_signal_rgmii {
atmel,pins =
<1 8 0x1 0x0 /* PB8 periph A GTXCK, conflicts with PWMH2 */
1 9 0x1 0x0 /* PB9 periph A GTXEN, conflicts with PWML2 */
1 11 0x1 0x0 /* PB11 periph A GRXCK, conflicts with RD1 */
1 13 0x1 0x0 /* PB13 periph A GRXER, conflicts with PWML3 */
1 16 0x1 0x0 /* PB16 periph A GMDC */
1 17 0x1 0x0 /* PB17 periph A GMDIO */
1 18 0x1 0x0>; /* PB18 periph A G125CK */
};
pinctrl_macb0_signal_gmii: macb0_signal_gmii {
atmel,pins =
<1 9 0x1 0x0 /* PB9 periph A GTXEN, conflicts with PWML2 */
1 10 0x1 0x0 /* PB10 periph A GTXER, conflicts with RF1 */
1 11 0x1 0x0 /* PB11 periph A GRXCK, conflicts with RD1 */
1 12 0x1 0x0 /* PB12 periph A GRXDV, conflicts with PWMH3 */
1 13 0x1 0x0 /* PB13 periph A GRXER, conflicts with PWML3 */
1 14 0x1 0x0 /* PB14 periph A GCRS, conflicts with CANRX1 */
1 15 0x1 0x0 /* PB15 periph A GCOL, conflicts with CANTX1 */
1 16 0x1 0x0 /* PB16 periph A GMDC */
1 17 0x1 0x0 /* PB17 periph A GMDIO */
1 27 0x2 0x0>; /* PB27 periph B G125CKO */
};
};
macb1 {
pinctrl_macb1_rmii: macb1_rmii-0 {
atmel,pins =
<2 0 0x1 0x0 /* PC0 periph A ETX0, conflicts with TIOA3 */
2 1 0x1 0x0 /* PC1 periph A ETX1, conflicts with TIOB3 */
2 2 0x1 0x0 /* PC2 periph A ERX0, conflicts with TCLK3 */
2 3 0x1 0x0 /* PC3 periph A ERX1, conflicts with TIOA4 */
2 4 0x1 0x0 /* PC4 periph A ETXEN, conflicts with TIOB4 */
2 5 0x1 0x0 /* PC5 periph A ECRSDV,conflicts with TCLK4 */
2 6 0x1 0x0 /* PC6 periph A ERXER, conflicts with TIOA5 */
2 7 0x1 0x0 /* PC7 periph A EREFCK, conflicts with TIOB5 */
2 8 0x1 0x0 /* PC8 periph A EMDC, conflicts with TCLK5 */
2 9 0x1 0x0>; /* PC9 periph A EMDIO */
};
};
mmc0 {
pinctrl_mmc0_clk_cmd_dat0: mmc0_clk_cmd_dat0 {
atmel,pins =
<3 9 0x1 0x0 /* PD9 periph A MCI0_CK */
3 0 0x1 0x1 /* PD0 periph A MCI0_CDA with pullup */
3 1 0x1 0x1>; /* PD1 periph A MCI0_DA0 with pullup */
};
pinctrl_mmc0_dat1_3: mmc0_dat1_3 {
atmel,pins =
<3 2 0x1 0x1 /* PD2 periph A MCI0_DA1 with pullup */
3 3 0x1 0x1 /* PD3 periph A MCI0_DA2 with pullup */
3 4 0x1 0x1>; /* PD4 periph A MCI0_DA3 with pullup */
};
pinctrl_mmc0_dat4_7: mmc0_dat4_7 {
atmel,pins =
<3 5 0x1 0x1 /* PD5 periph A MCI0_DA4 with pullup, conflicts with TIOA0, PWMH2 */
3 6 0x1 0x1 /* PD6 periph A MCI0_DA5 with pullup, conflicts with TIOB0, PWML2 */
3 7 0x1 0x1 /* PD7 periph A MCI0_DA6 with pullup, conlicts with TCLK0, PWMH3 */
3 8 0x1 0x1>; /* PD8 periph A MCI0_DA7 with pullup, conflicts with PWML3 */
};
};
mmc1 {
pinctrl_mmc1_clk_cmd_dat0: mmc1_clk_cmd_dat0 {
atmel,pins =
<1 24 0x1 0x0 /* PB24 periph A MCI1_CK, conflicts with GRX5 */
1 19 0x1 0x1 /* PB19 periph A MCI1_CDA with pullup, conflicts with GTX4 */
1 20 0x1 0x1>; /* PB20 periph A MCI1_DA0 with pullup, conflicts with GTX5 */
};
pinctrl_mmc1_dat1_3: mmc1_dat1_3 {
atmel,pins =
<1 21 0x1 0x1 /* PB21 periph A MCI1_DA1 with pullup, conflicts with GTX6 */
1 22 0x1 0x1 /* PB22 periph A MCI1_DA2 with pullup, conflicts with GTX7 */
1 23 0x1 0x1>; /* PB23 periph A MCI1_DA3 with pullup, conflicts with GRX4 */
};
};
mmc2 {
pinctrl_mmc2_clk_cmd_dat0: mmc2_clk_cmd_dat0 {
atmel,pins =
<2 15 0x1 0x0 /* PC15 periph A MCI2_CK, conflicts with PCK2 */
2 10 0x1 0x1 /* PC10 periph A MCI2_CDA with pullup */
2 11 0x1 0x1>; /* PC11 periph A MCI2_DA0 with pullup */
};
pinctrl_mmc2_dat1_3: mmc2_dat1_3 {
atmel,pins =
<2 12 0x1 0x0 /* PC12 periph A MCI2_DA1 with pullup, conflicts with TIOA1 */
2 13 0x1 0x0 /* PC13 periph A MCI2_DA2 with pullup, conflicts with TIOB1 */
2 14 0x1 0x0>; /* PC14 periph A MCI2_DA3 with pullup, conflicts with TCLK1 */
};
};
nand0 {
pinctrl_nand0_ale_cle: nand0_ale_cle-0 {
atmel,pins =
<4 21 0x1 0x1 /* PE21 periph A with pullup */
4 22 0x1 0x1>; /* PE22 periph A with pullup */
};
};
pioA: gpio@fffff200 {
compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
reg = <0xfffff200 0x100>;
interrupts = <6 4 1>;
#gpio-cells = <2>;
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
};
pioB: gpio@fffff400 {
compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
reg = <0xfffff400 0x100>;
interrupts = <7 4 1>;
#gpio-cells = <2>;
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
};
pioC: gpio@fffff600 {
compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
reg = <0xfffff600 0x100>;
interrupts = <8 4 1>;
#gpio-cells = <2>;
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
};
pioD: gpio@fffff800 {
compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
reg = <0xfffff800 0x100>;
interrupts = <9 4 1>;
#gpio-cells = <2>;
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
};
pioE: gpio@fffffa00 {
compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
reg = <0xfffffa00 0x100>;
interrupts = <10 4 1>;
#gpio-cells = <2>;
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
};
spi0 {
pinctrl_spi0: spi0-0 {
atmel,pins =
<3 10 0x1 0x0 /* PD10 periph A SPI0_MISO pin */
3 11 0x1 0x0 /* PD11 periph A SPI0_MOSI pin */
3 12 0x1 0x0 /* PD12 periph A SPI0_SPCK pin */
3 13 0x0 0x0>; /* PD13 GPIO SPI0_NPCS0 pin */
};
};
spi1 {
pinctrl_spi1: spi1-0 {
atmel,pins =
<2 22 0x1 0x0 /* PC22 periph A SPI1_MISO pin */
2 23 0x1 0x0 /* PC23 periph A SPI1_MOSI pin */
2 24 0x1 0x0 /* PC24 periph A SPI1_SPCK pin */
2 25 0x0 0x0>; /* PC25 GPIO SPI1_NPCS0 pin */
};
};
ssc0 {
pinctrl_ssc0_tx: ssc0_tx {
atmel,pins =
<2 16 0x1 0x0 /* PC16 periph A TK0 */
2 17 0x1 0x0 /* PC17 periph A TF0 */
2 18 0x1 0x0>; /* PC18 periph A TD0 */
};
pinctrl_ssc0_rx: ssc0_rx {
atmel,pins =
<2 19 0x1 0x0 /* PC19 periph A RK0 */
2 20 0x1 0x0 /* PC20 periph A RF0 */
2 21 0x1 0x0>; /* PC21 periph A RD0 */
};
};
ssc1 {
pinctrl_ssc1_tx: ssc1_tx {
atmel,pins =
<1 2 0x2 0x0 /* PB2 periph B TK1, conflicts with GTX2 */
1 3 0x2 0x0 /* PB3 periph B TF1, conflicts with GTX3 */
1 6 0x2 0x0>; /* PB6 periph B TD1, conflicts with TD1 */
};
pinctrl_ssc1_rx: ssc1_rx {
atmel,pins =
<1 7 0x2 0x0 /* PB7 periph B RK1, conflicts with EREFCK */
1 10 0x2 0x0 /* PB10 periph B RF1, conflicts with GTXER */
1 11 0x2 0x0>; /* PB11 periph B RD1, conflicts with GRXCK */
};
};
uart0 {
pinctrl_uart0: uart0-0 {
atmel,pins =
<2 29 0x1 0x0 /* PC29 periph A, conflicts with PWMFI2, ISI_D8 */
2 30 0x1 0x1>; /* PC30 periph A with pullup, conflicts with ISI_PCK */
};
};
uart1 {
pinctrl_uart1: uart1-0 {
atmel,pins =
<0 30 0x2 0x0 /* PA30 periph B, conflicts with TWD0, ISI_VSYNC */
0 31 0x2 0x1>; /* PA31 periph B with pullup, conflicts with TWCK0, ISI_HSYNC */
};
};
usart0 {
pinctrl_usart0: usart0-0 {
atmel,pins =
<3 17 0x1 0x0 /* PD17 periph A */
3 18 0x1 0x1>; /* PD18 periph A with pullup */
};
pinctrl_usart0_rts_cts: usart0_rts_cts-0 {
atmel,pins =
<3 15 0x1 0x0 /* PD15 periph A, conflicts with SPI0_NPCS2, CANTX0 */
3 16 0x1 0x0>; /* PD16 periph A, conflicts with SPI0_NPCS3, PWMFI3 */
};
};
usart1 {
pinctrl_usart1: usart1-0 {
atmel,pins =
<1 28 0x1 0x0 /* PB28 periph A */
1 29 0x1 0x1>; /* PB29 periph A with pullup */
};
pinctrl_usart1_rts_cts: usart1_rts_cts-0 {
atmel,pins =
<1 26 0x1 0x0 /* PB26 periph A, conflicts with GRX7 */
1 27 0x1 0x0>; /* PB27 periph A, conflicts with G125CKO */
};
};
usart2 {
pinctrl_usart2: usart2-0 {
atmel,pins =
<4 25 0x2 0x0 /* PE25 periph B, conflicts with A25 */
4 26 0x2 0x1>; /* PE26 periph B with pullup, conflicts NCS0 */
};
pinctrl_usart2_rts_cts: usart2_rts_cts-0 {
atmel,pins =
<4 23 0x2 0x0 /* PE23 periph B, conflicts with A23 */
4 24 0x2 0x0>; /* PE24 periph B, conflicts with A24 */
};
};
usart3 {
pinctrl_usart3: usart3-0 {
atmel,pins =
<4 18 0x2 0x0 /* PE18 periph B, conflicts with A18 */
4 19 0x2 0x1>; /* PE19 periph B with pullup, conflicts with A19 */
};
pinctrl_usart3_rts_cts: usart3_rts_cts-0 {
atmel,pins =
<4 16 0x2 0x0 /* PE16 periph B, conflicts with A16 */
4 17 0x2 0x0>; /* PE17 periph B, conflicts with A17 */
};
};
};
pmc: pmc@fffffc00 {
compatible = "atmel,at91rm9200-pmc";
reg = <0xfffffc00 0x120>;
};
rstc@fffffe00 {
compatible = "atmel,at91sam9g45-rstc";
reg = <0xfffffe00 0x10>;
};
pit: timer@fffffe30 {
compatible = "atmel,at91sam9260-pit";
reg = <0xfffffe30 0xf>;
interrupts = <3 4 5>;
};
watchdog@fffffe40 {
compatible = "atmel,at91sam9260-wdt";
reg = <0xfffffe40 0x10>;
status = "disabled";
};
rtc@fffffeb0 {
compatible = "atmel,at91rm9200-rtc";
reg = <0xfffffeb0 0x30>;
interrupts = <1 4 7>;
};
};
usb0: gadget@00500000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "atmel,at91sam9rl-udc";
reg = <0x00500000 0x100000
0xf8030000 0x4000>;
interrupts = <33 4 2>;
status = "disabled";
ep0 {
reg = <0>;
atmel,fifo-size = <64>;
atmel,nb-banks = <1>;
};
ep1 {
reg = <1>;
atmel,fifo-size = <1024>;
atmel,nb-banks = <3>;
atmel,can-dma;
atmel,can-isoc;
};
ep2 {
reg = <2>;
atmel,fifo-size = <1024>;
atmel,nb-banks = <3>;
atmel,can-dma;
atmel,can-isoc;
};
ep3 {
reg = <3>;
atmel,fifo-size = <1024>;
atmel,nb-banks = <2>;
atmel,can-dma;
};
ep4 {
reg = <4>;
atmel,fifo-size = <1024>;
atmel,nb-banks = <2>;
atmel,can-dma;
};
ep5 {
reg = <5>;
atmel,fifo-size = <1024>;
atmel,nb-banks = <2>;
atmel,can-dma;
};
ep6 {
reg = <6>;
atmel,fifo-size = <1024>;
atmel,nb-banks = <2>;
atmel,can-dma;
};
ep7 {
reg = <7>;
atmel,fifo-size = <1024>;
atmel,nb-banks = <2>;
atmel,can-dma;
};
ep8 {
reg = <8>;
atmel,fifo-size = <1024>;
atmel,nb-banks = <2>;
};
ep9 {
reg = <9>;
atmel,fifo-size = <1024>;
atmel,nb-banks = <2>;
};
ep10 {
reg = <10>;
atmel,fifo-size = <1024>;
atmel,nb-banks = <2>;
};
ep11 {
reg = <11>;
atmel,fifo-size = <1024>;
atmel,nb-banks = <2>;
};
ep12 {
reg = <12>;
atmel,fifo-size = <1024>;
atmel,nb-banks = <2>;
};
ep13 {
reg = <13>;
atmel,fifo-size = <1024>;
atmel,nb-banks = <2>;
};
ep14 {
reg = <14>;
atmel,fifo-size = <1024>;
atmel,nb-banks = <2>;
};
ep15 {
reg = <15>;
atmel,fifo-size = <1024>;
atmel,nb-banks = <2>;
};
};
usb1: ohci@00600000 {
compatible = "atmel,at91rm9200-ohci", "usb-ohci";
reg = <0x00600000 0x100000>;
interrupts = <32 4 2>;
status = "disabled";
};
usb2: ehci@00700000 {
compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
reg = <0x00700000 0x100000>;
interrupts = <32 4 2>;
status = "disabled";
};
nand0: nand@60000000 {
compatible = "atmel,at91rm9200-nand";
#address-cells = <1>;
#size-cells = <1>;
reg = < 0x60000000 0x01000000 /* EBI CS3 */
0xffffc070 0x00000490 /* SMC PMECC regs */
0xffffc500 0x00000100 /* SMC PMECC Error Location regs */
0x00100000 0x00100000 /* ROM code */
0x70000000 0x10000000 /* NFC Command Registers */
0xffffc000 0x00000070 /* NFC HSMC regs */
0x00200000 0x00100000 /* NFC SRAM banks */
>;
interrupts = <5 4 6>;
atmel,nand-addr-offset = <21>;
atmel,nand-cmd-offset = <22>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_nand0_ale_cle>;
atmel,pmecc-lookup-table-offset = <0x10000 0x18000>;
status = "disabled";
};
};
};
arch/arm/boot/dts/sama5d31ek.dts 0 → 100644
View file @ a71efd61
/*
* sama5d31ek.dts - Device Tree file for SAMA5D31-EK board
*
* Copyright (C) 2013 Atmel,
* 2013 Ludovic Desroches <ludovic.desroches@atmel.com>
*
* Licensed under GPLv2 or later.
*/
/dts-v1/;
/include/ "sama5d3xmb.dtsi"
/include/ "sama5d3xdm.dtsi"
/ {
model = "Atmel SAMA5D31-EK";
compatible = "atmel,sama5d31ek", "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d3", "atmel,sama5";
ahb {
apb {
spi0: spi@f0004000 {
status = "okay";
};
ssc0: ssc@f0008000 {
status = "okay";
};
i2c0: i2c@f0014000 {
status = "okay";
};
i2c1: i2c@f0018000 {
status = "okay";
};
macb1: ethernet@f802c000 {
status = "okay";
};
};
};
leds {
d3 {
label = "d3";
gpios = <&pioE 24 0>;
};
};
sound {
status = "okay";
};
};
arch/arm/boot/dts/sama5d33ek.dts 0 → 100644
View file @ a71efd61
/*
* sama5d33ek.dts - Device Tree file for SAMA5D33-EK board
*
* Copyright (C) 2013 Atmel,
* 2013 Ludovic Desroches <ludovic.desroches@atmel.com>
*
* Licensed under GPLv2 or later.
*/
/dts-v1/;
/include/ "sama5d3xmb.dtsi"
/include/ "sama5d3xdm.dtsi"
/ {
model = "Atmel SAMA5D33-EK";
compatible = "atmel,sama5d33ek", "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d3", "atmel,sama5";
ahb {
apb {
spi0: spi@f0004000 {
status = "okay";
};
ssc0: ssc@f0008000 {
status = "okay";
};
i2c0: i2c@f0014000 {
status = "okay";
};
i2c1: i2c@f0018000 {
status = "okay";
};
macb0: ethernet@f0028000 {
status = "okay";
};
};
};
sound {
status = "okay";
};
};
arch/arm/boot/dts/sama5d34ek.dts 0 → 100644
View file @ a71efd61
/*
* sama5d34ek.dts - Device Tree file for SAMA5D34-EK board
*
* Copyright (C) 2013 Atmel,
* 2013 Ludovic Desroches <ludovic.desroches@atmel.com>
*
* Licensed under GPLv2 or later.
*/
/dts-v1/;
/include/ "sama5d3xmb.dtsi"
/include/ "sama5d3xdm.dtsi"
/ {
model = "Atmel SAMA5D34-EK";
compatible = "atmel,sama5d34ek", "atmel,sama5ek", "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d3", "atmel,sama5";
ahb {
apb {
spi0: spi@f0004000 {
status = "okay";
};
ssc0: ssc@f0008000 {
status = "okay";
};
can0: can@f000c000 {
status = "okay";
};
i2c0: i2c@f0014000 {
status = "okay";
};
i2c1: i2c@f0018000 {
status = "okay";
24c256@50 {
compatible = "24c256";
reg = <0x50>;
pagesize = <64>;
};
};
macb0: ethernet@f0028000 {
status = "okay";
};
};
};
leds {
d3 {
label = "d3";
gpios = <&pioE 24 0>;
};
};
sound {
status = "okay";
};
};
arch/arm/boot/dts/sama5d35ek.dts 0 → 100644
View file @ a71efd61
/*
* sama5d35ek.dts - Device Tree file for SAMA5D35-EK board
*
* Copyright (C) 2013 Atmel,
* 2013 Ludovic Desroches <ludovic.desroches@atmel.com>
*
* Licensed under GPLv2 or later.
*/
/dts-v1/;
/include/ "sama5d3xmb.dtsi"
/ {
model = "Atmel SAMA5D35-EK";
compatible = "atmel,sama5d35ek", "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d3", "atmel,sama5";
ahb {
apb {
spi0: spi@f0004000 {
status = "okay";
};
can0: can@f000c000 {
status = "okay";
};
i2c1: i2c@f0018000 {
status = "okay";
};
macb0: ethernet@f0028000 {
status = "okay";
};
isi: isi@f0034000 {
status = "okay";
};
macb1: ethernet@f802c000 {
status = "okay";
};
};
};
gpio_keys {
compatible = "gpio-keys";
#address-cells = <1>;
#size-cells = <0>;
pb_user1 {
label = "pb_user1";
gpios = <&pioE 27 0>;
linux,code = <0x100>;
gpio-key,wakeup;
};
};
};
arch/arm/boot/dts/sama5d3xcm.dtsi 0 → 100644
View file @ a71efd61
/*
* sama5d3xcm.dtsi - Device Tree Include file for SAMA5D3x CPU Module
*
* Copyright (C) 2013 Atmel,
* 2013 Ludovic Desroches <ludovic.desroches@atmel.com>
*
* Licensed under GPLv2 or later.
*/
/include/ "sama5d3.dtsi"
/ {
compatible = "atmel,samad3xcm", "atmel,sama5d3", "atmel,sama5";
chosen {
bootargs = "console=ttyS0,115200 rootfstype=ubifs ubi.mtd=5 root=ubi0:rootfs";
};
memory {
reg = <0x20000000 0x20000000>;
};
clocks {
#address-cells = <1>;
#size-cells = <1>;
ranges;
main_clock: clock@0 {
compatible = "atmel,osc", "fixed-clock";
clock-frequency = <12000000>;
};
};
ahb {
apb {
macb0: ethernet@f0028000 {
phy-mode = "rgmii";
};
};
nand0: nand@60000000 {
nand-bus-width = <8>;
nand-ecc-mode = "hw";
atmel,has-pmecc;
atmel,pmecc-cap = <4>;
atmel,pmecc-sector-size = <512>;
atmel,has-nfc;
atmel,use-nfc-sram;
nand-on-flash-bbt;
status = "okay";
at91bootstrap@0 {
label = "at91bootstrap";
reg = <0x0 0x40000>;
};
bootloader@40000 {
label = "bootloader";
reg = <0x40000 0x80000>;
};
bootloaderenv@c0000 {
label = "bootloader env";
reg = <0xc0000 0xc0000>;
};
dtb@180000 {
label = "device tree";
reg = <0x180000 0x80000>;
};
kernel@200000 {
label = "kernel";
reg = <0x200000 0x600000>;
};
rootfs@800000 {
label = "rootfs";
reg = <0x800000 0x0f800000>;
};
};
};
leds {
compatible = "gpio-leds";
d2 {
label = "d2";
gpios = <&pioE 25 1>; /* PE25, conflicts with A25, RXD2 */
};
};
};
arch/arm/boot/dts/sama5d3xdm.dtsi 0 → 100644
View file @ a71efd61
/*
* sama5d3dm.dtsi - Device Tree file for SAMA5 display module
*
* Copyright (C) 2013 Atmel,
* 2013 Ludovic Desroches <ludovic.desroches@atmel.com>
*
* Licensed under GPLv2 or later.
*/
/ {
ahb {
apb {
i2c1: i2c@f0018000 {
qt1070: keyboard@1b {
compatible = "qt1070";
reg = <0x1b>;
interrupt-parent = <&pioE>;
interrupts = <31 0x0>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_qt1070_irq>;
};
};
adc0: adc@f8018000 {
status = "disabled";
};
tsadcc: tsadcc@f8018000 {
status = "okay";
};
pinctrl@fffff200 {
board {
pinctrl_qt1070_irq: qt1070_irq {
atmel,pins =
<4 31 0x0 0x5>; /* PE31 GPIO with pull up deglith */
};
};
};
};
};
};
arch/arm/boot/dts/sama5d3xmb.dtsi 0 → 100644
View file @ a71efd61
/*
* sama5d3xmb.dts - Device Tree file for SAMA5D3x mother board
*
* Copyright (C) 2013 Atmel,
* 2013 Ludovic Desroches <ludovic.desroches@atmel.com>
*
* Licensed under GPLv2 or later.
*/
/include/ "sama5d3xcm.dtsi"
/ {
compatible = "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d3", "atmel,sama5";
ahb {
apb {
mmc0: mmc@f0000000 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_cd>;
status = "okay";
slot@0 {
reg = <0>;
bus-width = <4>;
cd-gpios = <&pioD 17 0>;
};
};
spi0: spi@f0004000 {
m25p80@0 {
compatible = "atmel,at25df321a";
spi-max-frequency = <50000000>;
reg = <0>;
};
};
/*
* i2c0 conflicts with ISI:
* disable it to allow the use of ISI
* can not enable audio when i2c0 disabled
*/
i2c0: i2c@f0014000 {
wm8904: wm8904@1a {
compatible = "wm8904";
reg = <0x1a>;
};
};
usart1: serial@f0020000 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usart1 &pinctrl_usart1_rts_cts>;
status = "okay";
};
isi: isi@f0034000 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_isi &pinctrl_isi_pck_as_mck &pinctrl_isi_power &pinctrl_isi_reset>;
};
mmc1: mmc@f8000000 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3 &pinctrl_mmc1_cd>;
status = "okay";
slot@0 {
reg = <0>;
bus-width = <4>;
cd-gpios = <&pioD 18 0>;
};
};
adc0: adc@f8018000 {
pinctrl-names = "default";
pinctrl-0 = <
&pinctrl_adc0_adtrg
&pinctrl_adc0_ad0
&pinctrl_adc0_ad1
&pinctrl_adc0_ad2
&pinctrl_adc0_ad3
&pinctrl_adc0_ad4
>;
status = "okay";
};
macb1: ethernet@f802c000 {
phy-mode = "rmii";
};
pinctrl@fffff200 {
board {
pinctrl_mmc0_cd: mmc0_cd {
atmel,pins =
<3 17 0x0 0x5>; /* PD17 GPIO with pullup deglitch */
};
pinctrl_mmc1_cd: mmc1_cd {
atmel,pins =
<3 18 0x0 0x5>; /* PD18 GPIO with pullup deglitch */
};
pinctrl_pck0_as_audio_mck: pck0_as_audio_mck {
atmel,pins =
<3 30 0x2 0x0>; /* PD30 periph B */
};
pinctrl_isi_reset: isi_reset-0 {
atmel,pins =
<4 24 0x0 0x0>; /* PE24 gpio */
};
pinctrl_isi_power: isi_power-0 {
atmel,pins =
<4 29 0x0 0x0>; /* PE29 gpio */
};
pinctrl_usba_vbus: usba_vbus {
atmel,pins =
<3 29 0x0 0x4>; /* PD29 GPIO with deglitch */
};
};
};
dbgu: serial@ffffee00 {
status = "okay";
};
watchdog@fffffe40 {
status = "okay";
};
};
usb0: gadget@00500000 {
atmel,vbus-gpio = <&pioD 29 0>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usba_vbus>;
status = "okay";
};
usb1: ohci@00600000 {
num-ports = <3>;
atmel,vbus-gpio = <&pioD 25 0
&pioD 26 1
&pioD 27 1
>;
status = "okay";
};
usb2: ehci@00700000 {
status = "okay";
};
};
sound {
compatible = "atmel,sama5d3ek-wm8904";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pck0_as_audio_mck>;
atmel,model = "wm8904 @ SAMA5D3EK";
atmel,audio-routing =
"Headphone Jack", "HPOUTL",
"Headphone Jack", "HPOUTR",
"IN2L", "Line In Jack",
"IN2R", "Line In Jack",
"IN1L", "Mic";
atmel,ssc-controller = <&ssc0>;
atmel,audio-codec = <&wm8904>;
};
};
arch/arm/configs/at91_dt_defconfig
View file @ a71efd61
......@@ -20,7 +20,7 @@ CONFIG_SOC_AT91SAM9263=y
CONFIG_SOC_AT91SAM9G45=y
CONFIG_SOC_AT91SAM9X5=y
CONFIG_SOC_AT91SAM9N12=y
CONFIG_MACH_AT91SAM_DT=y
CONFIG_MACH_AT91SAM9_DT=y
CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
CONFIG_AT91_TIMER_HZ=128
CONFIG_AEABI=y
......
arch/arm/configs/at91sam9260_defconfig
View file @ a71efd61
......@@ -22,7 +22,7 @@ CONFIG_MACH_QIL_A9260=y
CONFIG_MACH_CPU9260=y
CONFIG_MACH_FLEXIBITY=y
CONFIG_MACH_SNAPPER_9260=y
CONFIG_MACH_AT91SAM_DT=y
CONFIG_MACH_AT91SAM9_DT=y
CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
# CONFIG_ARM_THUMB is not set
CONFIG_ZBOOT_ROM_TEXT=0x0
......
arch/arm/configs/at91sam9g20_defconfig
View file @ a71efd61
......@@ -22,7 +22,7 @@ CONFIG_MACH_PCONTROL_G20=y
CONFIG_MACH_GSIA18S=y
CONFIG_MACH_USB_A9G20=y
CONFIG_MACH_SNAPPER_9260=y
CONFIG_MACH_AT91SAM_DT=y
CONFIG_MACH_AT91SAM9_DT=y
CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
# CONFIG_ARM_THUMB is not set
CONFIG_AEABI=y
......
arch/arm/configs/at91sam9g45_defconfig
View file @ a71efd61
......@@ -18,7 +18,7 @@ CONFIG_MODULE_UNLOAD=y
CONFIG_ARCH_AT91=y
CONFIG_ARCH_AT91SAM9G45=y
CONFIG_MACH_AT91SAM9M10G45EK=y
CONFIG_MACH_AT91SAM_DT=y
CONFIG_MACH_AT91SAM9_DT=y
CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
CONFIG_AT91_SLOW_CLOCK=y
CONFIG_AEABI=y
......
arch/arm/configs/sama5_defconfig 0 → 100644
View file @ a71efd61
# CONFIG_LOCALVERSION_AUTO is not set
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
CONFIG_IRQ_DOMAIN_DEBUG=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_EMBEDDED=y
CONFIG_SLAB=y
CONFIG_MODULES=y
CONFIG_MODULE_FORCE_LOAD=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_LBDAF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
CONFIG_ARCH_AT91=y
CONFIG_SOC_SAM_V7=y
CONFIG_SOC_SAMA5D3=y
CONFIG_MACH_SAMA5_DT=y
CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
CONFIG_AEABI=y
# CONFIG_OABI_COMPAT is not set
CONFIG_UACCESS_WITH_MEMCPY=y
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="console=ttyS0,115200 initrd=0x21100000,25165824 root=/dev/ram0 rw"
CONFIG_AUTO_ZRELADDR=y
CONFIG_VFP=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
CONFIG_PM_RUNTIME=y
CONFIG_PM_DEBUG=y
CONFIG_PM_ADVANCED_DEBUG=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_PNP=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
# CONFIG_INET_DIAG is not set
CONFIG_IPV6=y
# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
# CONFIG_INET6_XFRM_MODE_BEET is not set
CONFIG_IPV6_SIT_6RD=y
CONFIG_CAN=y
CONFIG_CAN_AT91=y
CONFIG_CFG80211=y
CONFIG_MAC80211=y
CONFIG_MAC80211_LEDS=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
# CONFIG_STANDALONE is not set
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
CONFIG_MTD=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_CFI=y
CONFIG_MTD_M25P80=y
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_ATMEL=y
CONFIG_MTD_UBI=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=4
CONFIG_BLK_DEV_RAM_SIZE=8192
CONFIG_ATMEL_TCLIB=y
CONFIG_ATMEL_SSC=y
CONFIG_EEPROM_AT24=y
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_SCSI_MULTI_LUN=y
# CONFIG_SCSI_LOWLEVEL is not set
CONFIG_NETDEVICES=y
CONFIG_MII=y
CONFIG_MACB=y
# CONFIG_NET_VENDOR_BROADCOM is not set
# CONFIG_NET_VENDOR_CIRRUS is not set
# CONFIG_NET_VENDOR_FARADAY is not set
# CONFIG_NET_VENDOR_INTEL is not set
# CONFIG_NET_VENDOR_MARVELL is not set
# CONFIG_NET_VENDOR_MICREL is not set
# CONFIG_NET_VENDOR_MICROCHIP is not set
# CONFIG_NET_VENDOR_NATSEMI is not set
# CONFIG_NET_VENDOR_SEEQ is not set
# CONFIG_NET_VENDOR_SMSC is not set
# CONFIG_NET_VENDOR_STMICRO is not set
# CONFIG_NET_VENDOR_WIZNET is not set
CONFIG_MICREL_PHY=y
# CONFIG_WLAN is not set
# CONFIG_INPUT_MOUSEDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_KEYBOARD_ATKBD is not set
CONFIG_KEYBOARD_QT1070=y
CONFIG_KEYBOARD_GPIO=y
# CONFIG_INPUT_MOUSE is not set
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_ATMEL_MXT=y
CONFIG_TOUCHSCREEN_ATMEL_TSADCC=y
# CONFIG_SERIO is not set
CONFIG_LEGACY_PTY_COUNT=4
CONFIG_SERIAL_ATMEL=y
CONFIG_SERIAL_ATMEL_CONSOLE=y
CONFIG_HW_RANDOM=y
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_AT91=y
CONFIG_I2C_GPIO=y
CONFIG_SPI=y
CONFIG_SPI_ATMEL=y
CONFIG_SPI_GPIO=y
CONFIG_GPIO_SYSFS=y
# CONFIG_HWMON is not set
CONFIG_SSB=m
CONFIG_FB=y
CONFIG_BACKLIGHT_LCD_SUPPORT=y
# CONFIG_LCD_CLASS_DEVICE is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_GENERIC is not set
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_HID_GENERIC is not set
CONFIG_USB=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_ACM=y
CONFIG_USB_STORAGE=y
CONFIG_USB_GADGET=y
CONFIG_USB_AT91=y
CONFIG_USB_MASS_STORAGE=m
CONFIG_MMC=y
# CONFIG_MMC_BLOCK_BOUNCE is not set
CONFIG_MMC_ATMELMCI=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_GPIO=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_LEDS_TRIGGER_GPIO=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_AT91RM9200=y
CONFIG_DMADEVICES=y
# CONFIG_IOMMU_SUPPORT is not set
CONFIG_IIO=y
CONFIG_AT91_ADC=y
CONFIG_EXT2_FS=y
CONFIG_FANOTIFY=y
CONFIG_VFAT_FS=y
CONFIG_TMPFS=y
CONFIG_JFFS2_FS=y
CONFIG_JFFS2_SUMMARY=y
CONFIG_UBIFS_FS=y
CONFIG_NFS_FS=y
CONFIG_ROOT_NFS=y
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_850=y
CONFIG_NLS_ISO8859_1=y
CONFIG_STRIP_ASM_SYMS=y
CONFIG_DEBUG_FS=y
# CONFIG_SCHED_DEBUG is not set
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_FTRACE is not set
CONFIG_DEBUG_USER=y
CONFIG_DEBUG_LL=y
CONFIG_EARLY_PRINTK=y
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_USER_API_HASH=m
CONFIG_CRYPTO_USER_API_SKCIPHER=m
CONFIG_CRYPTO_DEV_ATMEL_AES=y
CONFIG_CRYPTO_DEV_ATMEL_TDES=y
CONFIG_CRYPTO_DEV_ATMEL_SHA=y
CONFIG_CRC_CCITT=m
CONFIG_CRC_ITU_T=m
arch/arm/mach-at91/Kconfig
View file @ a71efd61
if ARCH_AT91
config HAVE_AT91_DATAFLASH_CARD
bool
config HAVE_AT91_DBGU0
bool
config HAVE_AT91_DBGU1
bool
config AT91_PMC_UNIT
bool
default !ARCH_AT91X40
config AT91_SAM9_ALT_RESET
bool
default !ARCH_AT91X40
......@@ -17,17 +18,59 @@ config AT91_SAM9G45_RESET
bool
default !ARCH_AT91X40
config AT91_SAM9_TIME
bool
config SOC_AT91SAM9
bool
select AT91_SAM9_TIME
select CPU_ARM926T
select GENERIC_CLOCKEVENTS
select MULTI_IRQ_HANDLER
select SPARSE_IRQ
config SOC_SAMA5
bool
select AT91_SAM9_TIME
select CPU_V7
select GENERIC_CLOCKEVENTS
select MULTI_IRQ_HANDLER
select SPARSE_IRQ
menu "Atmel AT91 System-on-Chip"
choice
prompt "Core type"
config SOC_SAM_V4_V5
bool "ARM7/ARM9"
help
Select this if you are using one of Atmel's AT91SAM9, AT91RM9200
or AT91X40 SoC.
config SOC_SAM_V7
bool "Cortex A5"
help
Select this if you are using one of Atmel's SAMA5D3 SoC.
endchoice
comment "Atmel AT91 Processor"
if SOC_SAM_V7
config SOC_SAMA5D3
bool "SAMA5D3 family"
depends on SOC_SAM_V7
select SOC_SAMA5
select HAVE_FB_ATMEL
select HAVE_AT91_DBGU1
help
Select this if you are using one of Atmel's SAMA5D3 family SoC.
This support covers SAMA5D31, SAMA5D33, SAMA5D34, SAMA5D35.
endif
if SOC_SAM_V4_V5
config SOC_AT91RM9200
bool "AT91RM9200"
select CPU_ARM920T
......@@ -93,394 +136,10 @@ config SOC_AT91SAM9N12
help
Select this if you are using Atmel's AT91SAM9N12 SoC.
choice
prompt "Atmel AT91 Processor Devices for non DT boards"
config ARCH_AT91_NONE
bool "None"
config ARCH_AT91RM9200
bool "AT91RM9200"
select SOC_AT91RM9200
config ARCH_AT91SAM9260
bool "AT91SAM9260 or AT91SAM9XE"
select SOC_AT91SAM9260
config ARCH_AT91SAM9261
bool "AT91SAM9261"
select SOC_AT91SAM9261
config ARCH_AT91SAM9G10
bool "AT91SAM9G10"
select SOC_AT91SAM9261
config ARCH_AT91SAM9263
bool "AT91SAM9263"
select SOC_AT91SAM9263
config ARCH_AT91SAM9RL
bool "AT91SAM9RL"
select SOC_AT91SAM9RL
config ARCH_AT91SAM9G20
bool "AT91SAM9G20"
select SOC_AT91SAM9260
config ARCH_AT91SAM9G45
bool "AT91SAM9G45"
select SOC_AT91SAM9G45
config ARCH_AT91X40
bool "AT91x40"
depends on !MMU
select ARCH_USES_GETTIMEOFFSET
select MULTI_IRQ_HANDLER
select SPARSE_IRQ
endchoice
config AT91_PMC_UNIT
bool
default !ARCH_AT91X40
# ----------------------------------------------------------
if ARCH_AT91RM9200
comment "AT91RM9200 Board Type"
config MACH_ONEARM
bool "Ajeco 1ARM Single Board Computer"
help
Select this if you are using Ajeco's 1ARM Single Board Computer.
<http://www.ajeco.fi/>
config ARCH_AT91RM9200DK
bool "Atmel AT91RM9200-DK Development board"
select HAVE_AT91_DATAFLASH_CARD
help
Select this if you are using Atmel's AT91RM9200-DK Development board.
(Discontinued)
config MACH_AT91RM9200EK
bool "Atmel AT91RM9200-EK Evaluation Kit"
select HAVE_AT91_DATAFLASH_CARD
help
Select this if you are using Atmel's AT91RM9200-EK Evaluation Kit.
<http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3507>
config MACH_CSB337
bool "Cogent CSB337"
help
Select this if you are using Cogent's CSB337 board.
<http://www.cogcomp.com/csb_csb337.htm>
config MACH_CSB637
bool "Cogent CSB637"
help
Select this if you are using Cogent's CSB637 board.
<http://www.cogcomp.com/csb_csb637.htm>
config MACH_CARMEVA
bool "Conitec ARM&EVA"
help
Select this if you are using Conitec's AT91RM9200-MCU-Module.
<http://www.conitec.net/english/linuxboard.php>
config MACH_ATEB9200
bool "Embest ATEB9200"
help
Select this if you are using Embest's ATEB9200 board.
<http://www.embedinfo.com/english/product/ATEB9200.asp>
config MACH_KB9200
bool "KwikByte KB920x"
help
Select this if you are using KwikByte's KB920x board.
<http://www.kwikbyte.com/KB9202.html>
config MACH_PICOTUX2XX
bool "picotux 200"
help
Select this if you are using a picotux 200.
<http://www.picotux.com/>
config MACH_KAFA
bool "Sperry-Sun KAFA board"
help
Select this if you are using Sperry-Sun's KAFA board.
config MACH_ECBAT91
bool "emQbit ECB_AT91 SBC"
select HAVE_AT91_DATAFLASH_CARD
help
Select this if you are using emQbit's ECB_AT91 board.
<http://wiki.emqbit.com/free-ecb-at91>
config MACH_YL9200
bool "ucDragon YL-9200"
help
Select this if you are using the ucDragon YL-9200 board.
config MACH_CPUAT91
bool "Eukrea CPUAT91"
help
Select this if you are using the Eukrea Electromatique's
CPUAT91 board <http://www.eukrea.com/>.
config MACH_ECO920
bool "eco920"
help
Select this if you are using the eco920 board
config MACH_RSI_EWS
bool "RSI Embedded Webserver"
depends on ARCH_AT91RM9200
help
Select this if you are using RSIs EWS board.
endif
# ----------------------------------------------------------
if ARCH_AT91SAM9260
comment "AT91SAM9260 Variants"
comment "AT91SAM9260 / AT91SAM9XE Board Type"
config MACH_AT91SAM9260EK
bool "Atmel AT91SAM9260-EK / AT91SAM9XE Evaluation Kit"
select HAVE_AT91_DATAFLASH_CARD
help
Select this if you are using Atmel's AT91SAM9260-EK or AT91SAM9XE Evaluation Kit
<http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3933>
config MACH_CAM60
bool "KwikByte KB9260 (CAM60) board"
help
Select this if you are using KwikByte's KB9260 (CAM60) board based on the Atmel AT91SAM9260.
<http://www.kwikbyte.com/KB9260.html>
config MACH_SAM9_L9260
bool "Olimex SAM9-L9260 board"
select HAVE_AT91_DATAFLASH_CARD
help
Select this if you are using Olimex's SAM9-L9260 board based on the Atmel AT91SAM9260.
<http://www.olimex.com/dev/sam9-L9260.html>
config MACH_AFEB9260
bool "Custom afeb9260 board v1"
help
Select this if you are using custom afeb9260 board based on
open hardware design. Select this for revision 1 of the board.
<svn://194.85.238.22/home/users/george/svn/arm9eb>
<http://groups.google.com/group/arm9fpga-evolution-board>
config MACH_USB_A9260
bool "CALAO USB-A9260"
help
Select this if you are using a Calao Systems USB-A9260.
<http://www.calao-systems.com>
config MACH_QIL_A9260
bool "CALAO QIL-A9260 board"
help
Select this if you are using a Calao Systems QIL-A9260 Board.
<http://www.calao-systems.com>
config MACH_CPU9260
bool "Eukrea CPU9260 board"
help
Select this if you are using a Eukrea Electromatique's
CPU9260 Board <http://www.eukrea.com/>
config MACH_FLEXIBITY
bool "Flexibity Connect board"
help
Select this if you are using Flexibity Connect board
<http://www.flexibity.com>
endif
# ----------------------------------------------------------
if ARCH_AT91SAM9261
comment "AT91SAM9261 Board Type"
config MACH_AT91SAM9261EK
bool "Atmel AT91SAM9261-EK Evaluation Kit"
select HAVE_AT91_DATAFLASH_CARD
help
Select this if you are using Atmel's AT91SAM9261-EK Evaluation Kit.
<http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3820>
endif
# ----------------------------------------------------------
if ARCH_AT91SAM9G10
comment "AT91SAM9G10 Board Type"
config MACH_AT91SAM9G10EK
bool "Atmel AT91SAM9G10-EK Evaluation Kit"
select HAVE_AT91_DATAFLASH_CARD
help
Select this if you are using Atmel's AT91SAM9G10-EK Evaluation Kit.
<http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4588>
endif
# ----------------------------------------------------------
if ARCH_AT91SAM9263
comment "AT91SAM9263 Board Type"
config MACH_AT91SAM9263EK
bool "Atmel AT91SAM9263-EK Evaluation Kit"
select HAVE_AT91_DATAFLASH_CARD
help
Select this if you are using Atmel's AT91SAM9263-EK Evaluation Kit.
<http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4057>
config MACH_USB_A9263
bool "CALAO USB-A9263"
help
Select this if you are using a Calao Systems USB-A9263.
<http://www.calao-systems.com>
endif
# ----------------------------------------------------------
if ARCH_AT91SAM9RL
comment "AT91SAM9RL Board Type"
config MACH_AT91SAM9RLEK
bool "Atmel AT91SAM9RL-EK Evaluation Kit"
help
Select this if you are using Atmel's AT91SAM9RL-EK Evaluation Kit.
endif
# ----------------------------------------------------------
if ARCH_AT91SAM9G20
comment "AT91SAM9G20 Board Type"
config MACH_AT91SAM9G20EK
bool "Atmel AT91SAM9G20-EK Evaluation Kit"
select HAVE_AT91_DATAFLASH_CARD
help
Select this if you are using Atmel's AT91SAM9G20-EK Evaluation Kit
that embeds only one SD/MMC slot.
config MACH_AT91SAM9G20EK_2MMC
depends on MACH_AT91SAM9G20EK
bool "Atmel AT91SAM9G20-EK Evaluation Kit with 2 SD/MMC Slots"
help
Select this if you are using an Atmel AT91SAM9G20-EK Evaluation Kit
with 2 SD/MMC Slots. This is the case for AT91SAM9G20-EK rev. C and
onwards.
<http://www.atmel.com/tools/SAM9G20-EK.aspx>
config MACH_CPU9G20
bool "Eukrea CPU9G20 board"
help
Select this if you are using a Eukrea Electromatique's
CPU9G20 Board <http://www.eukrea.com/>
config MACH_ACMENETUSFOXG20
bool "Acme Systems srl FOX Board G20"
help
Select this if you are using Acme Systems
FOX Board G20 <http://www.acmesystems.it>
config MACH_PORTUXG20
bool "taskit PortuxG20"
help
Select this if you are using taskit's PortuxG20.
<http://www.taskit.de/en/>
config MACH_STAMP9G20
bool "taskit Stamp9G20 CPU module"
help
Select this if you are using taskit's Stamp9G20 CPU module on its
evaluation board.
<http://www.taskit.de/en/>
config MACH_PCONTROL_G20
bool "PControl G20 CPU module"
help
Select this if you are using taskit's Stamp9G20 CPU module on this
carrier board, beeing the decentralized unit of a building automation
system; featuring nvram, eth-switch, iso-rs485, display, io
config MACH_GSIA18S
bool "GS_IA18_S board"
help
This enables support for the GS_IA18_S board
produced by GeoSIG Ltd company. This is an internet accelerograph.
<http://www.geosig.com>
config MACH_USB_A9G20
bool "CALAO USB-A9G20"
depends on ARCH_AT91SAM9G20
help
Select this if you are using a Calao Systems USB-A9G20.
<http://www.calao-systems.com>
endif
if (ARCH_AT91SAM9260 || ARCH_AT91SAM9G20)
comment "AT91SAM9260/AT91SAM9G20 boards"
config MACH_SNAPPER_9260
bool "Bluewater Systems Snapper 9260/9G20 module"
help
Select this if you are using the Bluewater Systems Snapper 9260 or
Snapper 9G20 modules.
<http://www.bluewatersys.com/>
endif
# ----------------------------------------------------------
if ARCH_AT91SAM9G45
comment "AT91SAM9G45 Board Type"
config MACH_AT91SAM9M10G45EK
bool "Atmel AT91SAM9M10G45-EK Evaluation Kits"
help
Select this if you are using Atmel's AT91SAM9M10G45-EK Evaluation Kit.
Those boards can be populated with any SoC of AT91SAM9G45 or AT91SAM9M10
families: AT91SAM9G45, AT91SAM9G46, AT91SAM9M10 and AT91SAM9M11.
<http://www.atmel.com/tools/SAM9M10-G45-EK.aspx>
endif
# ----------------------------------------------------------
if ARCH_AT91X40
comment "AT91X40 Board Type"
config MACH_AT91EB01
bool "Atmel AT91EB01 Evaluation Kit"
help
Select this if you are using Atmel's AT91EB01 Evaluation Kit.
It is also a popular target for simulators such as GDB's
ARM simulator (commonly known as the ARMulator) and the
Skyeye simulator.
endif
# ----------------------------------------------------------
source arch/arm/mach-at91/Kconfig.non_dt
endif # SOC_SAM_V4_V5
comment "Generic Board Type"
......@@ -492,7 +151,7 @@ config MACH_AT91RM9200_DT
Select this if you want to experiment device-tree with
an Atmel RM9200 Evaluation Kit.
config MACH_AT91SAM_DT
config MACH_AT91SAM9_DT
bool "Atmel AT91SAM Evaluation Kits with device-tree support"
depends on SOC_AT91SAM9
select USE_OF
......@@ -500,15 +159,13 @@ config MACH_AT91SAM_DT
Select this if you want to experiment device-tree with
an Atmel Evaluation Kit.
# ----------------------------------------------------------
comment "AT91 Board Options"
config MTD_AT91_DATAFLASH_CARD
bool "Enable DataFlash Card support"
depends on HAVE_AT91_DATAFLASH_CARD
config MACH_SAMA5_DT
bool "Atmel SAMA5 Evaluation Kits with device-tree support"
depends on SOC_SAMA5
select USE_OF
help
Enable support for the DataFlash card.
Select this if you want to experiment device-tree with
an Atmel Evaluation Kit.
# ----------------------------------------------------------
......
arch/arm/mach-at91/Kconfig.non_dt 0 → 100644
View file @ a71efd61
menu "Atmel Non-DT world"
config HAVE_AT91_DATAFLASH_CARD
bool
choice
prompt "Atmel AT91 Processor Devices for non DT boards"
config ARCH_AT91_NONE
bool "None"
config ARCH_AT91RM9200
bool "AT91RM9200"
select SOC_AT91RM9200
config ARCH_AT91SAM9260
bool "AT91SAM9260 or AT91SAM9XE"
select SOC_AT91SAM9260
config ARCH_AT91SAM9261
bool "AT91SAM9261"
select SOC_AT91SAM9261
config ARCH_AT91SAM9G10
bool "AT91SAM9G10"
select SOC_AT91SAM9261
config ARCH_AT91SAM9263
bool "AT91SAM9263"
select SOC_AT91SAM9263
config ARCH_AT91SAM9RL
bool "AT91SAM9RL"
select SOC_AT91SAM9RL
config ARCH_AT91SAM9G20
bool "AT91SAM9G20"
select SOC_AT91SAM9260
config ARCH_AT91SAM9G45
bool "AT91SAM9G45"
select SOC_AT91SAM9G45
config ARCH_AT91X40
bool "AT91x40"
depends on !MMU
select ARCH_USES_GETTIMEOFFSET
select MULTI_IRQ_HANDLER
select SPARSE_IRQ
endchoice
# ----------------------------------------------------------
if ARCH_AT91RM9200
comment "AT91RM9200 Board Type"
config MACH_ONEARM
bool "Ajeco 1ARM Single Board Computer"
help
Select this if you are using Ajeco's 1ARM Single Board Computer.
<http://www.ajeco.fi/>
config ARCH_AT91RM9200DK
bool "Atmel AT91RM9200-DK Development board"
select HAVE_AT91_DATAFLASH_CARD
help
Select this if you are using Atmel's AT91RM9200-DK Development board.
(Discontinued)
config MACH_AT91RM9200EK
bool "Atmel AT91RM9200-EK Evaluation Kit"
select HAVE_AT91_DATAFLASH_CARD
help
Select this if you are using Atmel's AT91RM9200-EK Evaluation Kit.
<http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3507>
config MACH_CSB337
bool "Cogent CSB337"
help
Select this if you are using Cogent's CSB337 board.
<http://www.cogcomp.com/csb_csb337.htm>
config MACH_CSB637
bool "Cogent CSB637"
help
Select this if you are using Cogent's CSB637 board.
<http://www.cogcomp.com/csb_csb637.htm>
config MACH_CARMEVA
bool "Conitec ARM&EVA"
help
Select this if you are using Conitec's AT91RM9200-MCU-Module.
<http://www.conitec.net/english/linuxboard.php>
config MACH_ATEB9200
bool "Embest ATEB9200"
help
Select this if you are using Embest's ATEB9200 board.
<http://www.embedinfo.com/english/product/ATEB9200.asp>
config MACH_KB9200
bool "KwikByte KB920x"
help
Select this if you are using KwikByte's KB920x board.
<http://www.kwikbyte.com/KB9202.html>
config MACH_PICOTUX2XX
bool "picotux 200"
help
Select this if you are using a picotux 200.
<http://www.picotux.com/>
config MACH_KAFA
bool "Sperry-Sun KAFA board"
help
Select this if you are using Sperry-Sun's KAFA board.
config MACH_ECBAT91
bool "emQbit ECB_AT91 SBC"
select HAVE_AT91_DATAFLASH_CARD
help
Select this if you are using emQbit's ECB_AT91 board.
<http://wiki.emqbit.com/free-ecb-at91>
config MACH_YL9200
bool "ucDragon YL-9200"
help
Select this if you are using the ucDragon YL-9200 board.
config MACH_CPUAT91
bool "Eukrea CPUAT91"
help
Select this if you are using the Eukrea Electromatique's
CPUAT91 board <http://www.eukrea.com/>.
config MACH_ECO920
bool "eco920"
help
Select this if you are using the eco920 board
config MACH_RSI_EWS
bool "RSI Embedded Webserver"
depends on ARCH_AT91RM9200
help
Select this if you are using RSIs EWS board.
endif
# ----------------------------------------------------------
if ARCH_AT91SAM9260
comment "AT91SAM9260 Variants"
comment "AT91SAM9260 / AT91SAM9XE Board Type"
config MACH_AT91SAM9260EK
bool "Atmel AT91SAM9260-EK / AT91SAM9XE Evaluation Kit"
select HAVE_AT91_DATAFLASH_CARD
help
Select this if you are using Atmel's AT91SAM9260-EK or AT91SAM9XE Evaluation Kit
<http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3933>
config MACH_CAM60
bool "KwikByte KB9260 (CAM60) board"
help
Select this if you are using KwikByte's KB9260 (CAM60) board based on the Atmel AT91SAM9260.
<http://www.kwikbyte.com/KB9260.html>
config MACH_SAM9_L9260
bool "Olimex SAM9-L9260 board"
select HAVE_AT91_DATAFLASH_CARD
help
Select this if you are using Olimex's SAM9-L9260 board based on the Atmel AT91SAM9260.
<http://www.olimex.com/dev/sam9-L9260.html>
config MACH_AFEB9260
bool "Custom afeb9260 board v1"
help
Select this if you are using custom afeb9260 board based on
open hardware design. Select this for revision 1 of the board.
<svn://194.85.238.22/home/users/george/svn/arm9eb>
<http://groups.google.com/group/arm9fpga-evolution-board>
config MACH_USB_A9260
bool "CALAO USB-A9260"
help
Select this if you are using a Calao Systems USB-A9260.
<http://www.calao-systems.com>
config MACH_QIL_A9260
bool "CALAO QIL-A9260 board"
help
Select this if you are using a Calao Systems QIL-A9260 Board.
<http://www.calao-systems.com>
config MACH_CPU9260
bool "Eukrea CPU9260 board"
help
Select this if you are using a Eukrea Electromatique's
CPU9260 Board <http://www.eukrea.com/>
config MACH_FLEXIBITY
bool "Flexibity Connect board"
help
Select this if you are using Flexibity Connect board
<http://www.flexibity.com>
endif
# ----------------------------------------------------------
if ARCH_AT91SAM9261
comment "AT91SAM9261 Board Type"
config MACH_AT91SAM9261EK
bool "Atmel AT91SAM9261-EK Evaluation Kit"
select HAVE_AT91_DATAFLASH_CARD
help
Select this if you are using Atmel's AT91SAM9261-EK Evaluation Kit.
<http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3820>
endif
# ----------------------------------------------------------
if ARCH_AT91SAM9G10
comment "AT91SAM9G10 Board Type"
config MACH_AT91SAM9G10EK
bool "Atmel AT91SAM9G10-EK Evaluation Kit"
select HAVE_AT91_DATAFLASH_CARD
help
Select this if you are using Atmel's AT91SAM9G10-EK Evaluation Kit.
<http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4588>
endif
# ----------------------------------------------------------
if ARCH_AT91SAM9263
comment "AT91SAM9263 Board Type"
config MACH_AT91SAM9263EK
bool "Atmel AT91SAM9263-EK Evaluation Kit"
select HAVE_AT91_DATAFLASH_CARD
help
Select this if you are using Atmel's AT91SAM9263-EK Evaluation Kit.
<http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4057>
config MACH_USB_A9263
bool "CALAO USB-A9263"
help
Select this if you are using a Calao Systems USB-A9263.
<http://www.calao-systems.com>
endif
# ----------------------------------------------------------
if ARCH_AT91SAM9RL
comment "AT91SAM9RL Board Type"
config MACH_AT91SAM9RLEK
bool "Atmel AT91SAM9RL-EK Evaluation Kit"
help
Select this if you are using Atmel's AT91SAM9RL-EK Evaluation Kit.
endif
# ----------------------------------------------------------
if ARCH_AT91SAM9G20
comment "AT91SAM9G20 Board Type"
config MACH_AT91SAM9G20EK
bool "Atmel AT91SAM9G20-EK Evaluation Kit"
select HAVE_AT91_DATAFLASH_CARD
help
Select this if you are using Atmel's AT91SAM9G20-EK Evaluation Kit
that embeds only one SD/MMC slot.
config MACH_AT91SAM9G20EK_2MMC
depends on MACH_AT91SAM9G20EK
bool "Atmel AT91SAM9G20-EK Evaluation Kit with 2 SD/MMC Slots"
help
Select this if you are using an Atmel AT91SAM9G20-EK Evaluation Kit
with 2 SD/MMC Slots. This is the case for AT91SAM9G20-EK rev. C and
onwards.
<http://www.atmel.com/tools/SAM9G20-EK.aspx>
config MACH_CPU9G20
bool "Eukrea CPU9G20 board"
help
Select this if you are using a Eukrea Electromatique's
CPU9G20 Board <http://www.eukrea.com/>
config MACH_ACMENETUSFOXG20
bool "Acme Systems srl FOX Board G20"
help
Select this if you are using Acme Systems
FOX Board G20 <http://www.acmesystems.it>
config MACH_PORTUXG20
bool "taskit PortuxG20"
help
Select this if you are using taskit's PortuxG20.
<http://www.taskit.de/en/>
config MACH_STAMP9G20
bool "taskit Stamp9G20 CPU module"
help
Select this if you are using taskit's Stamp9G20 CPU module on its
evaluation board.
<http://www.taskit.de/en/>
config MACH_PCONTROL_G20
bool "PControl G20 CPU module"
help
Select this if you are using taskit's Stamp9G20 CPU module on this
carrier board, beeing the decentralized unit of a building automation
system; featuring nvram, eth-switch, iso-rs485, display, io
config MACH_GSIA18S
bool "GS_IA18_S board"
help
This enables support for the GS_IA18_S board
produced by GeoSIG Ltd company. This is an internet accelerograph.
<http://www.geosig.com>
config MACH_USB_A9G20
bool "CALAO USB-A9G20"
depends on ARCH_AT91SAM9G20
help
Select this if you are using a Calao Systems USB-A9G20.
<http://www.calao-systems.com>
endif
if (ARCH_AT91SAM9260 || ARCH_AT91SAM9G20)
comment "AT91SAM9260/AT91SAM9G20 boards"
config MACH_SNAPPER_9260
bool "Bluewater Systems Snapper 9260/9G20 module"
help
Select this if you are using the Bluewater Systems Snapper 9260 or
Snapper 9G20 modules.
<http://www.bluewatersys.com/>
endif
# ----------------------------------------------------------
if ARCH_AT91SAM9G45
comment "AT91SAM9G45 Board Type"
config MACH_AT91SAM9M10G45EK
bool "Atmel AT91SAM9M10G45-EK Evaluation Kits"
help
Select this if you are using Atmel's AT91SAM9M10G45-EK Evaluation Kit.
Those boards can be populated with any SoC of AT91SAM9G45 or AT91SAM9M10
families: AT91SAM9G45, AT91SAM9G46, AT91SAM9M10 and AT91SAM9M11.
<http://www.atmel.com/tools/SAM9M10-G45-EK.aspx>
endif
# ----------------------------------------------------------
if ARCH_AT91X40
comment "AT91X40 Board Type"
config MACH_AT91EB01
bool "Atmel AT91EB01 Evaluation Kit"
help
Select this if you are using Atmel's AT91EB01 Evaluation Kit.
It is also a popular target for simulators such as GDB's
ARM simulator (commonly known as the ARMulator) and the
Skyeye simulator.
endif
# ----------------------------------------------------------
comment "AT91 Board Options"
config MTD_AT91_DATAFLASH_CARD
bool "Enable DataFlash Card support"
depends on HAVE_AT91_DATAFLASH_CARD
help
Enable support for the DataFlash card.
endmenu
arch/arm/mach-at91/Makefile
View file @ a71efd61
......@@ -10,7 +10,8 @@ obj- :=
obj-$(CONFIG_AT91_PMC_UNIT) += clock.o
obj-$(CONFIG_AT91_SAM9_ALT_RESET) += at91sam9_alt_reset.o
obj-$(CONFIG_AT91_SAM9G45_RESET) += at91sam9g45_reset.o
obj-$(CONFIG_SOC_AT91SAM9) += at91sam926x_time.o sam9_smc.o
obj-$(CONFIG_AT91_SAM9_TIME) += at91sam926x_time.o
obj-$(CONFIG_SOC_AT91SAM9) += sam9_smc.o
# CPU-specific support
obj-$(CONFIG_SOC_AT91RM9200) += at91rm9200.o at91rm9200_time.o
......@@ -21,6 +22,7 @@ obj-$(CONFIG_SOC_AT91SAM9G45) += at91sam9g45.o
obj-$(CONFIG_SOC_AT91SAM9N12) += at91sam9n12.o
obj-$(CONFIG_SOC_AT91SAM9X5) += at91sam9x5.o
obj-$(CONFIG_SOC_AT91SAM9RL) += at91sam9rl.o
obj-$(CONFIG_SOC_SAMA5D3) += sama5d3.o
obj-$(CONFIG_ARCH_AT91RM9200) += at91rm9200_devices.o
obj-$(CONFIG_ARCH_AT91SAM9260) += at91sam9260_devices.o
......@@ -87,8 +89,11 @@ obj-$(CONFIG_MACH_SNAPPER_9260) += board-snapper9260.o
obj-$(CONFIG_MACH_AT91SAM9M10G45EK) += board-sam9m10g45ek.o
# AT91SAM board with device-tree
obj-$(CONFIG_MACH_AT91RM9200_DT) += board-rm9200-dt.o
obj-$(CONFIG_MACH_AT91SAM_DT) += board-dt.o
obj-$(CONFIG_MACH_AT91RM9200_DT) += board-dt-rm9200.o
obj-$(CONFIG_MACH_AT91SAM9_DT) += board-dt-sam9.o
# SAMA5 board with device-tree
obj-$(CONFIG_MACH_SAMA5_DT) += board-dt-sama5.o
# AT91X40 board-specific support
obj-$(CONFIG_MACH_AT91EB01) += board-eb01.o
......
arch/arm/mach-at91/at91rm9200.c
View file @ a71efd61
......@@ -384,7 +384,7 @@ static unsigned int at91rm9200_default_irq_priority[NR_AIC_IRQS] __initdata = {
0 /* Advanced Interrupt Controller (IRQ6) */
};
AT91_SOC_START(rm9200)
AT91_SOC_START(at91rm9200)
.map_io = at91rm9200_map_io,
.default_irq_priority = at91rm9200_default_irq_priority,
.ioremap_registers = at91rm9200_ioremap_registers,
......
arch/arm/mach-at91/at91sam9260.c
View file @ a71efd61
......@@ -395,7 +395,7 @@ static unsigned int at91sam9260_default_irq_priority[NR_AIC_IRQS] __initdata = {
0, /* Advanced Interrupt Controller */
};
AT91_SOC_START(sam9260)
AT91_SOC_START(at91sam9260)
.map_io = at91sam9260_map_io,
.default_irq_priority = at91sam9260_default_irq_priority,
.ioremap_registers = at91sam9260_ioremap_registers,
......
arch/arm/mach-at91/at91sam9261.c
View file @ a71efd61
......@@ -337,7 +337,7 @@ static unsigned int at91sam9261_default_irq_priority[NR_AIC_IRQS] __initdata = {
0, /* Advanced Interrupt Controller */
};
AT91_SOC_START(sam9261)
AT91_SOC_START(at91sam9261)
.map_io = at91sam9261_map_io,
.default_irq_priority = at91sam9261_default_irq_priority,
.ioremap_registers = at91sam9261_ioremap_registers,
......
arch/arm/mach-at91/at91sam9263.c
View file @ a71efd61
......@@ -374,7 +374,7 @@ static unsigned int at91sam9263_default_irq_priority[NR_AIC_IRQS] __initdata = {
0, /* Advanced Interrupt Controller (IRQ1) */
};
AT91_SOC_START(sam9263)
AT91_SOC_START(at91sam9263)
.map_io = at91sam9263_map_io,
.default_irq_priority = at91sam9263_default_irq_priority,
.ioremap_registers = at91sam9263_ioremap_registers,
......
arch/arm/mach-at91/at91sam9g45.c
View file @ a71efd61
......@@ -418,7 +418,7 @@ static unsigned int at91sam9g45_default_irq_priority[NR_AIC_IRQS] __initdata = {
0, /* Advanced Interrupt Controller (IRQ0) */
};
AT91_SOC_START(sam9g45)
AT91_SOC_START(at91sam9g45)
.map_io = at91sam9g45_map_io,
.default_irq_priority = at91sam9g45_default_irq_priority,
.ioremap_registers = at91sam9g45_ioremap_registers,
......
arch/arm/mach-at91/at91sam9n12.c
View file @ a71efd61
......@@ -226,7 +226,7 @@ void __init at91sam9n12_initialize(void)
at91_extern_irq = (1 << AT91SAM9N12_ID_IRQ0);
}
AT91_SOC_START(sam9n12)
AT91_SOC_START(at91sam9n12)
.map_io = at91sam9n12_map_io,
.register_clocks = at91sam9n12_register_clocks,
.init = at91sam9n12_initialize,
......
arch/arm/mach-at91/at91sam9rl.c
View file @ a71efd61
......@@ -340,7 +340,7 @@ static unsigned int at91sam9rl_default_irq_priority[NR_AIC_IRQS] __initdata = {
0, /* Advanced Interrupt Controller */
};
AT91_SOC_START(sam9rl)
AT91_SOC_START(at91sam9rl)
.map_io = at91sam9rl_map_io,
.default_irq_priority = at91sam9rl_default_irq_priority,
.ioremap_registers = at91sam9rl_ioremap_registers,
......
arch/arm/mach-at91/at91sam9x5.c
View file @ a71efd61
......@@ -320,7 +320,7 @@ static void __init at91sam9x5_map_io(void)
* Interrupt initialization
* -------------------------------------------------------------------- */
AT91_SOC_START(sam9x5)
AT91_SOC_START(at91sam9x5)
.map_io = at91sam9x5_map_io,
.register_clocks = at91sam9x5_register_clocks,
AT91_SOC_END
arch/arm/mach-at91/board-dt-sama5.c 0 → 100644
View file @ a71efd61
/*
* Setup code for SAMA5 Evaluation Kits with Device Tree support
*
* Copyright (C) 2013 Atmel,
* 2013 Ludovic Desroches <ludovic.desroches@atmel.com>
*
* Licensed under GPLv2 or later.
*/
#include <linux/types.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/gpio.h>
#include <linux/micrel_phy.h>
#include <linux/of.h>
#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include <linux/phy.h>
#include <asm/setup.h>
#include <asm/irq.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
#include "at91_aic.h"
#include "generic.h"
static const struct of_device_id irq_of_match[] __initconst = {
{ .compatible = "atmel,sama5d3-aic", .data = at91_aic5_of_init },
{ /*sentinel*/ }
};
static void __init at91_dt_init_irq(void)
{
of_irq_init(irq_of_match);
}
static int ksz9021rn_phy_fixup(struct phy_device *phy)
{
int value;
#define GMII_RCCPSR 260
#define GMII_RRDPSR 261
#define GMII_ERCR 11
#define GMII_ERDWR 12
/* Set delay values */
value = GMII_RCCPSR | 0x8000;
phy_write(phy, GMII_ERCR, value);
value = 0xF2F4;
phy_write(phy, GMII_ERDWR, value);
value = GMII_RRDPSR | 0x8000;
phy_write(phy, GMII_ERCR, value);
value = 0x2222;
phy_write(phy, GMII_ERDWR, value);
return 0;
}
static void __init sama5_dt_device_init(void)
{
if (of_machine_is_compatible("atmel,sama5d3xcm"))
phy_register_fixup_for_uid(PHY_ID_KSZ9021, MICREL_PHY_ID_MASK,
ksz9021rn_phy_fixup);
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
}
static const char *sama5_dt_board_compat[] __initdata = {
"atmel,sama5",
NULL
};
DT_MACHINE_START(sama5_dt, "Atmel SAMA5 (Device Tree)")
/* Maintainer: Atmel */
.init_time = at91sam926x_pit_init,
.map_io = at91_map_io,
.handle_irq = at91_aic5_handle_irq,
.init_early = at91_dt_initialize,
.init_irq = at91_dt_init_irq,
.init_machine = sama5_dt_device_init,
.dt_compat = sama5_dt_board_compat,
MACHINE_END
arch/arm/mach-at91/clock.c
View file @ a71efd61
......@@ -54,7 +54,10 @@ EXPORT_SYMBOL_GPL(at91_pmc_base);
*/
#define cpu_has_utmi() ( cpu_is_at91sam9rl() \
|| cpu_is_at91sam9g45() \
|| cpu_is_at91sam9x5())
|| cpu_is_at91sam9x5() \
|| cpu_is_sama5d3())
#define cpu_has_1056M_plla() (cpu_is_sama5d3())
#define cpu_has_800M_plla() ( cpu_is_at91sam9g20() \
|| cpu_is_at91sam9g45() \
......@@ -75,7 +78,8 @@ EXPORT_SYMBOL_GPL(at91_pmc_base);
|| cpu_is_at91sam9n12()))
#define cpu_has_upll() (cpu_is_at91sam9g45() \
|| cpu_is_at91sam9x5())
|| cpu_is_at91sam9x5() \
|| cpu_is_sama5d3())
/* USB host HS & FS */
#define cpu_has_uhp() (!cpu_is_at91sam9rl())
......@@ -83,18 +87,22 @@ EXPORT_SYMBOL_GPL(at91_pmc_base);
/* USB device FS only */
#define cpu_has_udpfs() (!(cpu_is_at91sam9rl() \
|| cpu_is_at91sam9g45() \
|| cpu_is_at91sam9x5()))
|| cpu_is_at91sam9x5() \
|| cpu_is_sama5d3()))
#define cpu_has_plladiv2() (cpu_is_at91sam9g45() \
|| cpu_is_at91sam9x5() \
|| cpu_is_at91sam9n12())
|| cpu_is_at91sam9n12() \
|| cpu_is_sama5d3())
#define cpu_has_mdiv3() (cpu_is_at91sam9g45() \
|| cpu_is_at91sam9x5() \
|| cpu_is_at91sam9n12())
|| cpu_is_at91sam9n12() \
|| cpu_is_sama5d3())
#define cpu_has_alt_prescaler() (cpu_is_at91sam9x5() \
|| cpu_is_at91sam9n12())
|| cpu_is_at91sam9n12() \
|| cpu_is_sama5d3())
static LIST_HEAD(clocks);
static DEFINE_SPINLOCK(clk_lock);
......@@ -210,10 +218,26 @@ struct clk mck = {
static void pmc_periph_mode(struct clk *clk, int is_on)
{
u32 regval = 0;
/*
* With sama5d3 devices, we are managing clock division so we have to
* use the Peripheral Control Register introduced from at91sam9x5
* devices.
*/
if (cpu_is_sama5d3()) {
regval |= AT91_PMC_PCR_CMD; /* write command */
regval |= clk->pid & AT91_PMC_PCR_PID; /* peripheral selection */
regval |= AT91_PMC_PCR_DIV(clk->div);
if (is_on)
regval |= AT91_PMC_PCR_EN; /* enable clock */
at91_pmc_write(AT91_PMC_PCR, regval);
} else {
if (is_on)
at91_pmc_write(AT91_PMC_PCER, clk->pmc_mask);
else
at91_pmc_write(AT91_PMC_PCDR, clk->pmc_mask);
}
}
static struct clk __init *at91_css_to_clk(unsigned long css)
......@@ -443,14 +467,18 @@ static void __init init_programmable_clock(struct clk *clk)
static int at91_clk_show(struct seq_file *s, void *unused)
{
u32 scsr, pcsr, uckr = 0, sr;
u32 scsr, pcsr, pcsr1 = 0, uckr = 0, sr;
struct clk *clk;
scsr = at91_pmc_read(AT91_PMC_SCSR);
pcsr = at91_pmc_read(AT91_PMC_PCSR);
if (cpu_is_sama5d3())
pcsr1 = at91_pmc_read(AT91_PMC_PCSR1);
sr = at91_pmc_read(AT91_PMC_SR);
seq_printf(s, "SCSR = %8x\n", scsr);
seq_printf(s, "PCSR = %8x\n", pcsr);
if (cpu_is_sama5d3())
seq_printf(s, "PCSR1 = %8x\n", pcsr1);
seq_printf(s, "MOR = %8x\n", at91_pmc_read(AT91_CKGR_MOR));
seq_printf(s, "MCFR = %8x\n", at91_pmc_read(AT91_CKGR_MCFR));
seq_printf(s, "PLLA = %8x\n", at91_pmc_read(AT91_CKGR_PLLAR));
......@@ -470,20 +498,30 @@ static int at91_clk_show(struct seq_file *s, void *unused)
list_for_each_entry(clk, &clocks, node) {
char *state;
if (clk->mode == pmc_sys_mode)
if (clk->mode == pmc_sys_mode) {
state = (scsr & clk->pmc_mask) ? "on" : "off";
else if (clk->mode == pmc_periph_mode)
} else if (clk->mode == pmc_periph_mode) {
if (cpu_is_sama5d3()) {
u32 pmc_mask = 1 << (clk->pid % 32);
if (clk->pid > 31)
state = (pcsr1 & pmc_mask) ? "on" : "off";
else
state = (pcsr & pmc_mask) ? "on" : "off";
} else {
state = (pcsr & clk->pmc_mask) ? "on" : "off";
else if (clk->mode == pmc_uckr_mode)
}
} else if (clk->mode == pmc_uckr_mode) {
state = (uckr & clk->pmc_mask) ? "on" : "off";
else if (clk->pmc_mask)
} else if (clk->pmc_mask) {
state = (sr & clk->pmc_mask) ? "on" : "off";
else if (clk == &clk32k || clk == &main_clk)
} else if (clk == &clk32k || clk == &main_clk) {
state = "on";
else
} else {
state = "";
}
seq_printf(s, "%-10s users=%2d %-3s %9ld Hz %s\n",
seq_printf(s, "%-10s users=%2d %-3s %9lu Hz %s\n",
clk->name, clk->users, state, clk_get_rate(clk),
clk->parent ? clk->parent->name : "");
}
......@@ -530,6 +568,9 @@ int __init clk_register(struct clk *clk)
if (clk_is_peripheral(clk)) {
if (!clk->parent)
clk->parent = &mck;
if (cpu_is_sama5d3())
clk->rate_hz = DIV_ROUND_UP(clk->parent->rate_hz,
1 << clk->div);
clk->mode = pmc_periph_mode;
}
else if (clk_is_sys(clk)) {
......@@ -555,7 +596,11 @@ static u32 __init at91_pll_rate(struct clk *pll, u32 freq, u32 reg)
unsigned mul, div;
div = reg & 0xff;
mul = (reg >> 16) & 0x7ff;
if (cpu_is_sama5d3())
mul = AT91_PMC3_MUL_GET(reg);
else
mul = AT91_PMC_MUL_GET(reg);
if (div && mul) {
freq /= div;
freq *= mul + 1;
......@@ -706,12 +751,15 @@ static int __init at91_pmc_init(unsigned long main_clock)
/* report if PLLA is more than mildly overclocked */
plla.rate_hz = at91_pll_rate(&plla, main_clock, at91_pmc_read(AT91_CKGR_PLLAR));
if (cpu_has_300M_plla()) {
if (plla.rate_hz > 300000000)
if (cpu_has_1056M_plla()) {
if (plla.rate_hz > 1056000000)
pll_overclock = true;
} else if (cpu_has_800M_plla()) {
if (plla.rate_hz > 800000000)
pll_overclock = true;
} else if (cpu_has_300M_plla()) {
if (plla.rate_hz > 300000000)
pll_overclock = true;
} else if (cpu_has_240M_plla()) {
if (plla.rate_hz > 240000000)
pll_overclock = true;
......@@ -872,6 +920,7 @@ int __init at91_clock_init(unsigned long main_clock)
static int __init at91_clock_reset(void)
{
unsigned long pcdr = 0;
unsigned long pcdr1 = 0;
unsigned long scdr = 0;
struct clk *clk;
......@@ -879,8 +928,17 @@ static int __init at91_clock_reset(void)
if (clk->users > 0)
continue;
if (clk->mode == pmc_periph_mode)
if (clk->mode == pmc_periph_mode) {
if (cpu_is_sama5d3()) {
u32 pmc_mask = 1 << (clk->pid % 32);
if (clk->pid > 31)
pcdr1 |= pmc_mask;
else
pcdr |= pmc_mask;
} else
pcdr |= clk->pmc_mask;
}
if (clk->mode == pmc_sys_mode)
scdr |= clk->pmc_mask;
......@@ -888,8 +946,9 @@ static int __init at91_clock_reset(void)
pr_debug("Clocks: disable unused %s\n", clk->name);
}
at91_pmc_write(AT91_PMC_PCDR, pcdr);
at91_pmc_write(AT91_PMC_SCDR, scdr);
if (cpu_is_sama5d3())
at91_pmc_write(AT91_PMC_PCDR1, pcdr1);
return 0;
}
......
arch/arm/mach-at91/clock.h
View file @ a71efd61
......@@ -20,7 +20,9 @@ struct clk {
const char *name; /* unique clock name */
struct clk_lookup cl;
unsigned long rate_hz;
unsigned div; /* parent clock divider */
struct clk *parent;
unsigned pid; /* peripheral ID */
u32 pmc_mask;
void (*mode)(struct clk *, int);
unsigned id:3; /* PCK0..4, or 32k/main/a/b */
......
arch/arm/mach-at91/include/mach/at91_pmc.h
View file @ a71efd61
......@@ -75,6 +75,9 @@ extern void __iomem *at91_pmc_base;
#define AT91_PMC_PLLCOUNT (0x3f << 8) /* PLL Counter */
#define AT91_PMC_OUT (3 << 14) /* PLL Clock Frequency Range */
#define AT91_PMC_MUL (0x7ff << 16) /* PLL Multiplier */
#define AT91_PMC_MUL_GET(n) ((n) >> 16 & 0x7ff)
#define AT91_PMC3_MUL (0x7f << 18) /* PLL Multiplier [SAMA5 only] */
#define AT91_PMC3_MUL_GET(n) ((n) >> 18 & 0x7f)
#define AT91_PMC_USBDIV (3 << 28) /* USB Divisor (PLLB only) */
#define AT91_PMC_USBDIV_1 (0 << 28)
#define AT91_PMC_USBDIV_2 (1 << 28)
......@@ -167,11 +170,18 @@ extern void __iomem *at91_pmc_base;
#define AT91_PMC_WPVS (0x1 << 0) /* Write Protect Violation Status */
#define AT91_PMC_WPVSRC (0xffff << 8) /* Write Protect Violation Source */
#define AT91_PMC_PCR 0x10c /* Peripheral Control Register [some SAM9] */
#define AT91_PMC_PCER1 0x100 /* Peripheral Clock Enable Register 1 [SAMA5 only]*/
#define AT91_PMC_PCDR1 0x104 /* Peripheral Clock Enable Register 1 */
#define AT91_PMC_PCSR1 0x108 /* Peripheral Clock Enable Register 1 */
#define AT91_PMC_PCR 0x10c /* Peripheral Control Register [some SAM9 and SAMA5] */
#define AT91_PMC_PCR_PID (0x3f << 0) /* Peripheral ID */
#define AT91_PMC_PCR_CMD (0x1 << 12) /* Command */
#define AT91_PMC_PCR_DIV (0x3 << 16) /* Divisor Value */
#define AT91_PMC_PCRDIV(n) (((n) << 16) & AT91_PMC_PCR_DIV)
#define AT91_PMC_PCR_CMD (0x1 << 12) /* Command (read=0, write=1) */
#define AT91_PMC_PCR_DIV(n) ((n) << 16) /* Divisor Value */
#define AT91_PMC_PCR_DIV0 0x0 /* Peripheral clock is MCK */
#define AT91_PMC_PCR_DIV2 0x2 /* Peripheral clock is MCK/2 */
#define AT91_PMC_PCR_DIV4 0x4 /* Peripheral clock is MCK/4 */
#define AT91_PMC_PCR_DIV8 0x8 /* Peripheral clock is MCK/8 */
#define AT91_PMC_PCR_EN (0x1 << 28) /* Enable */
#endif
arch/arm/mach-at91/include/mach/cpu.h
View file @ a71efd61
......@@ -36,6 +36,8 @@
#define ARCH_ID_AT91M40807 0x14080745
#define ARCH_ID_AT91R40008 0x44000840
#define ARCH_ID_SAMA5D3 0x8A5C07C0
#define ARCH_EXID_AT91SAM9M11 0x00000001
#define ARCH_EXID_AT91SAM9M10 0x00000002
#define ARCH_EXID_AT91SAM9G46 0x00000003
......@@ -47,6 +49,11 @@
#define ARCH_EXID_AT91SAM9G25 0x00000003
#define ARCH_EXID_AT91SAM9X25 0x00000004
#define ARCH_EXID_SAMA5D31 0x00444300
#define ARCH_EXID_SAMA5D33 0x00414300
#define ARCH_EXID_SAMA5D34 0x00414301
#define ARCH_EXID_SAMA5D35 0x00584300
#define ARCH_FAMILY_AT91X92 0x09200000
#define ARCH_FAMILY_AT91SAM9 0x01900000
#define ARCH_FAMILY_AT91SAM9XE 0x02900000
......@@ -75,6 +82,9 @@ enum at91_soc_type {
/* SAM9N12 */
AT91_SOC_SAM9N12,
/* SAMA5D3 */
AT91_SOC_SAMA5D3,
/* Unknown type */
AT91_SOC_NONE
};
......@@ -93,6 +103,10 @@ enum at91_soc_subtype {
AT91_SOC_SAM9G15, AT91_SOC_SAM9G35, AT91_SOC_SAM9X35,
AT91_SOC_SAM9G25, AT91_SOC_SAM9X25,
/* SAMA5D3 */
AT91_SOC_SAMA5D31, AT91_SOC_SAMA5D33, AT91_SOC_SAMA5D34,
AT91_SOC_SAMA5D35,
/* Unknown subtype */
AT91_SOC_SUBTYPE_NONE
};
......@@ -187,6 +201,12 @@ static inline int at91_soc_is_detected(void)
#define cpu_is_at91sam9n12() (0)
#endif
#ifdef CONFIG_SOC_SAMA5D3
#define cpu_is_sama5d3() (at91_soc_initdata.type == AT91_SOC_SAMA5D3)
#else
#define cpu_is_sama5d3() (0)
#endif
/*
* Since this is ARM, we will never run on any AVR32 CPU. But these
* definitions may reduce clutter in common drivers.
......
arch/arm/mach-at91/include/mach/sama5d3.h 0 → 100644
View file @ a71efd61
/*
* Chip-specific header file for the SAMA5D3 family
*
* Copyright (C) 2013 Atmel,
* 2013 Ludovic Desroches <ludovic.desroches@atmel.com>
*
* Common definitions.
* Based on SAMA5D3 datasheet.
*
* Licensed under GPLv2 or later.
*/
#ifndef SAMA5D3_H
#define SAMA5D3_H
/*
* Peripheral identifiers/interrupts.
*/
#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */
#define AT91_ID_SYS 1 /* System Peripherals */
#define SAMA5D3_ID_DBGU 2 /* debug Unit (usually no special interrupt line) */
#define AT91_ID_PIT 3 /* PIT */
#define SAMA5D3_ID_WDT 4 /* Watchdog Timer Interrupt */
#define SAMA5D3_ID_HSMC 5 /* Static Memory Controller */
#define SAMA5D3_ID_PIOA 6 /* PIOA */
#define SAMA5D3_ID_PIOB 7 /* PIOB */
#define SAMA5D3_ID_PIOC 8 /* PIOC */
#define SAMA5D3_ID_PIOD 9 /* PIOD */
#define SAMA5D3_ID_PIOE 10 /* PIOE */
#define SAMA5D3_ID_SMD 11 /* SMD Soft Modem */
#define SAMA5D3_ID_USART0 12 /* USART0 */
#define SAMA5D3_ID_USART1 13 /* USART1 */
#define SAMA5D3_ID_USART2 14 /* USART2 */
#define SAMA5D3_ID_USART3 15 /* USART3 */
#define SAMA5D3_ID_UART0 16 /* UART 0 */
#define SAMA5D3_ID_UART1 17 /* UART 1 */
#define SAMA5D3_ID_TWI0 18 /* Two-Wire Interface 0 */
#define SAMA5D3_ID_TWI1 19 /* Two-Wire Interface 1 */
#define SAMA5D3_ID_TWI2 20 /* Two-Wire Interface 2 */
#define SAMA5D3_ID_HSMCI0 21 /* MCI */
#define SAMA5D3_ID_HSMCI1 22 /* MCI */
#define SAMA5D3_ID_HSMCI2 23 /* MCI */
#define SAMA5D3_ID_SPI0 24 /* Serial Peripheral Interface 0 */
#define SAMA5D3_ID_SPI1 25 /* Serial Peripheral Interface 1 */
#define SAMA5D3_ID_TC0 26 /* Timer Counter 0 */
#define SAMA5D3_ID_TC1 27 /* Timer Counter 2 */
#define SAMA5D3_ID_PWM 28 /* Pulse Width Modulation Controller */
#define SAMA5D3_ID_ADC 29 /* Touch Screen ADC Controller */
#define SAMA5D3_ID_DMA0 30 /* DMA Controller 0 */
#define SAMA5D3_ID_DMA1 31 /* DMA Controller 1 */
#define SAMA5D3_ID_UHPHS 32 /* USB Host High Speed */
#define SAMA5D3_ID_UDPHS 33 /* USB Device High Speed */
#define SAMA5D3_ID_GMAC 34 /* Gigabit Ethernet MAC */
#define SAMA5D3_ID_EMAC 35 /* Ethernet MAC */
#define SAMA5D3_ID_LCDC 36 /* LCD Controller */
#define SAMA5D3_ID_ISI 37 /* Image Sensor Interface */
#define SAMA5D3_ID_SSC0 38 /* Synchronous Serial Controller 0 */
#define SAMA5D3_ID_SSC1 39 /* Synchronous Serial Controller 1 */
#define SAMA5D3_ID_CAN0 40 /* CAN Controller 0 */
#define SAMA5D3_ID_CAN1 41 /* CAN Controller 1 */
#define SAMA5D3_ID_SHA 42 /* Secure Hash Algorithm */
#define SAMA5D3_ID_AES 43 /* Advanced Encryption Standard */
#define SAMA5D3_ID_TDES 44 /* Triple Data Encryption Standard */
#define SAMA5D3_ID_TRNG 45 /* True Random Generator Number */
#define SAMA5D3_ID_IRQ0 47 /* Advanced Interrupt Controller (IRQ0) */
/*
* Internal Memory
*/
#define SAMA5D3_SRAM_BASE 0x00300000 /* Internal SRAM base address */
#define SAMA5D3_SRAM_SIZE (128 * SZ_1K) /* Internal SRAM size (128Kb) */
#endif
arch/arm/mach-at91/sama5d3.c 0 → 100644
View file @ a71efd61
/*
* Chip-specific setup code for the SAMA5D3 family
*
* Copyright (C) 2013 Atmel,
* 2013 Ludovic Desroches <ludovic.desroches@atmel.com>
*
* Licensed under GPLv2 or later.
*/
#include <linux/module.h>
#include <linux/dma-mapping.h>
#include <asm/irq.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <mach/sama5d3.h>
#include <mach/at91_pmc.h>
#include <mach/cpu.h>
#include "soc.h"
#include "generic.h"
#include "clock.h"
#include "sam9_smc.h"
/* --------------------------------------------------------------------
* Clocks
* -------------------------------------------------------------------- */
/*
* The peripheral clocks.
*/
static struct clk pioA_clk = {
.name = "pioA_clk",
.pid = SAMA5D3_ID_PIOA,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk pioB_clk = {
.name = "pioB_clk",
.pid = SAMA5D3_ID_PIOB,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk pioC_clk = {
.name = "pioC_clk",
.pid = SAMA5D3_ID_PIOC,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk pioD_clk = {
.name = "pioD_clk",
.pid = SAMA5D3_ID_PIOD,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk pioE_clk = {
.name = "pioE_clk",
.pid = SAMA5D3_ID_PIOE,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk usart0_clk = {
.name = "usart0_clk",
.pid = SAMA5D3_ID_USART0,
.type = CLK_TYPE_PERIPHERAL,
.div = AT91_PMC_PCR_DIV2,
};
static struct clk usart1_clk = {
.name = "usart1_clk",
.pid = SAMA5D3_ID_USART1,
.type = CLK_TYPE_PERIPHERAL,
.div = AT91_PMC_PCR_DIV2,
};
static struct clk usart2_clk = {
.name = "usart2_clk",
.pid = SAMA5D3_ID_USART2,
.type = CLK_TYPE_PERIPHERAL,
.div = AT91_PMC_PCR_DIV2,
};
static struct clk usart3_clk = {
.name = "usart3_clk",
.pid = SAMA5D3_ID_USART3,
.type = CLK_TYPE_PERIPHERAL,
.div = AT91_PMC_PCR_DIV2,
};
static struct clk uart0_clk = {
.name = "uart0_clk",
.pid = SAMA5D3_ID_UART0,
.type = CLK_TYPE_PERIPHERAL,
.div = AT91_PMC_PCR_DIV2,
};
static struct clk uart1_clk = {
.name = "uart1_clk",
.pid = SAMA5D3_ID_UART1,
.type = CLK_TYPE_PERIPHERAL,
.div = AT91_PMC_PCR_DIV2,
};
static struct clk twi0_clk = {
.name = "twi0_clk",
.pid = SAMA5D3_ID_TWI0,
.type = CLK_TYPE_PERIPHERAL,
.div = AT91_PMC_PCR_DIV2,
};
static struct clk twi1_clk = {
.name = "twi1_clk",
.pid = SAMA5D3_ID_TWI1,
.type = CLK_TYPE_PERIPHERAL,
.div = AT91_PMC_PCR_DIV2,
};
static struct clk twi2_clk = {
.name = "twi2_clk",
.pid = SAMA5D3_ID_TWI2,
.type = CLK_TYPE_PERIPHERAL,
.div = AT91_PMC_PCR_DIV2,
};
static struct clk mmc0_clk = {
.name = "mci0_clk",
.pid = SAMA5D3_ID_HSMCI0,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk mmc1_clk = {
.name = "mci1_clk",
.pid = SAMA5D3_ID_HSMCI1,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk mmc2_clk = {
.name = "mci2_clk",
.pid = SAMA5D3_ID_HSMCI2,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk spi0_clk = {
.name = "spi0_clk",
.pid = SAMA5D3_ID_SPI0,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk spi1_clk = {
.name = "spi1_clk",
.pid = SAMA5D3_ID_SPI1,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk tcb0_clk = {
.name = "tcb0_clk",
.pid = SAMA5D3_ID_TC0,
.type = CLK_TYPE_PERIPHERAL,
.div = AT91_PMC_PCR_DIV2,
};
static struct clk tcb1_clk = {
.name = "tcb1_clk",
.pid = SAMA5D3_ID_TC1,
.type = CLK_TYPE_PERIPHERAL,
.div = AT91_PMC_PCR_DIV2,
};
static struct clk adc_clk = {
.name = "adc_clk",
.pid = SAMA5D3_ID_ADC,
.type = CLK_TYPE_PERIPHERAL,
.div = AT91_PMC_PCR_DIV2,
};
static struct clk adc_op_clk = {
.name = "adc_op_clk",
.type = CLK_TYPE_PERIPHERAL,
.rate_hz = 5000000,
};
static struct clk dma0_clk = {
.name = "dma0_clk",
.pid = SAMA5D3_ID_DMA0,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk dma1_clk = {
.name = "dma1_clk",
.pid = SAMA5D3_ID_DMA1,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk uhphs_clk = {
.name = "uhphs",
.pid = SAMA5D3_ID_UHPHS,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk udphs_clk = {
.name = "udphs_clk",
.pid = SAMA5D3_ID_UDPHS,
.type = CLK_TYPE_PERIPHERAL,
};
/* gmac only for sama5d33, sama5d34, sama5d35 */
static struct clk macb0_clk = {
.name = "macb0_clk",
.pid = SAMA5D3_ID_GMAC,
.type = CLK_TYPE_PERIPHERAL,
};
/* emac only for sama5d31, sama5d35 */
static struct clk macb1_clk = {
.name = "macb1_clk",
.pid = SAMA5D3_ID_EMAC,
.type = CLK_TYPE_PERIPHERAL,
};
/* lcd only for sama5d31, sama5d33, sama5d34 */
static struct clk lcdc_clk = {
.name = "lcdc_clk",
.pid = SAMA5D3_ID_LCDC,
.type = CLK_TYPE_PERIPHERAL,
};
/* isi only for sama5d33, sama5d35 */
static struct clk isi_clk = {
.name = "isi_clk",
.pid = SAMA5D3_ID_ISI,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk can0_clk = {
.name = "can0_clk",
.pid = SAMA5D3_ID_CAN0,
.type = CLK_TYPE_PERIPHERAL,
.div = AT91_PMC_PCR_DIV2,
};
static struct clk can1_clk = {
.name = "can1_clk",
.pid = SAMA5D3_ID_CAN1,
.type = CLK_TYPE_PERIPHERAL,
.div = AT91_PMC_PCR_DIV2,
};
static struct clk ssc0_clk = {
.name = "ssc0_clk",
.pid = SAMA5D3_ID_SSC0,
.type = CLK_TYPE_PERIPHERAL,
.div = AT91_PMC_PCR_DIV2,
};
static struct clk ssc1_clk = {
.name = "ssc1_clk",
.pid = SAMA5D3_ID_SSC1,
.type = CLK_TYPE_PERIPHERAL,
.div = AT91_PMC_PCR_DIV2,
};
static struct clk sha_clk = {
.name = "sha_clk",
.pid = SAMA5D3_ID_SHA,
.type = CLK_TYPE_PERIPHERAL,
.div = AT91_PMC_PCR_DIV8,
};
static struct clk aes_clk = {
.name = "aes_clk",
.pid = SAMA5D3_ID_AES,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk tdes_clk = {
.name = "tdes_clk",
.pid = SAMA5D3_ID_TDES,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk *periph_clocks[] __initdata = {
&pioA_clk,
&pioB_clk,
&pioC_clk,
&pioD_clk,
&pioE_clk,
&usart0_clk,
&usart1_clk,
&usart2_clk,
&usart3_clk,
&uart0_clk,
&uart1_clk,
&twi0_clk,
&twi1_clk,
&twi2_clk,
&mmc0_clk,
&mmc1_clk,
&mmc2_clk,
&spi0_clk,
&spi1_clk,
&tcb0_clk,
&tcb1_clk,
&adc_clk,
&adc_op_clk,
&dma0_clk,
&dma1_clk,
&uhphs_clk,
&udphs_clk,
&macb0_clk,
&macb1_clk,
&lcdc_clk,
&isi_clk,
&can0_clk,
&can1_clk,
&ssc0_clk,
&ssc1_clk,
&sha_clk,
&aes_clk,
&tdes_clk,
};
static struct clk pck0 = {
.name = "pck0",
.pmc_mask = AT91_PMC_PCK0,
.type = CLK_TYPE_PROGRAMMABLE,
.id = 0,
};
static struct clk pck1 = {
.name = "pck1",
.pmc_mask = AT91_PMC_PCK1,
.type = CLK_TYPE_PROGRAMMABLE,
.id = 1,
};
static struct clk pck2 = {
.name = "pck2",
.pmc_mask = AT91_PMC_PCK2,
.type = CLK_TYPE_PROGRAMMABLE,
.id = 2,
};
static struct clk_lookup periph_clocks_lookups[] = {
/* lookup table for DT entries */
CLKDEV_CON_DEV_ID("usart", "ffffee00.serial", &mck),
CLKDEV_CON_DEV_ID(NULL, "fffff200.gpio", &pioA_clk),
CLKDEV_CON_DEV_ID(NULL, "fffff400.gpio", &pioB_clk),
CLKDEV_CON_DEV_ID(NULL, "fffff600.gpio", &pioC_clk),
CLKDEV_CON_DEV_ID(NULL, "fffff800.gpio", &pioD_clk),
CLKDEV_CON_DEV_ID(NULL, "fffffa00.gpio", &pioE_clk),
CLKDEV_CON_DEV_ID("usart", "f001c000.serial", &usart0_clk),
CLKDEV_CON_DEV_ID("usart", "f0020000.serial", &usart1_clk),
CLKDEV_CON_DEV_ID("usart", "f8020000.serial", &usart2_clk),
CLKDEV_CON_DEV_ID("usart", "f8024000.serial", &usart3_clk),
CLKDEV_CON_DEV_ID(NULL, "f0014000.i2c", &twi0_clk),
CLKDEV_CON_DEV_ID(NULL, "f0018000.i2c", &twi1_clk),
CLKDEV_CON_DEV_ID(NULL, "f801c000.i2c", &twi2_clk),
CLKDEV_CON_DEV_ID("mci_clk", "f0000000.mmc", &mmc0_clk),
CLKDEV_CON_DEV_ID("mci_clk", "f8000000.mmc", &mmc1_clk),
CLKDEV_CON_DEV_ID("mci_clk", "f8004000.mmc", &mmc2_clk),
CLKDEV_CON_DEV_ID("spi_clk", "f0004000.spi", &spi0_clk),
CLKDEV_CON_DEV_ID("spi_clk", "f8008000.spi", &spi1_clk),
CLKDEV_CON_DEV_ID("t0_clk", "f0010000.timer", &tcb0_clk),
CLKDEV_CON_DEV_ID("t0_clk", "f8014000.timer", &tcb1_clk),
CLKDEV_CON_DEV_ID("tsc_clk", "f8018000.tsadcc", &adc_clk),
CLKDEV_CON_DEV_ID("dma_clk", "ffffe600.dma-controller", &dma0_clk),
CLKDEV_CON_DEV_ID("dma_clk", "ffffe800.dma-controller", &dma1_clk),
CLKDEV_CON_DEV_ID("hclk", "600000.ohci", &uhphs_clk),
CLKDEV_CON_DEV_ID("ohci_clk", "600000.ohci", &uhphs_clk),
CLKDEV_CON_DEV_ID("ehci_clk", "700000.ehci", &uhphs_clk),
CLKDEV_CON_DEV_ID("pclk", "500000.gadget", &udphs_clk),
CLKDEV_CON_DEV_ID("hclk", "500000.gadget", &utmi_clk),
CLKDEV_CON_DEV_ID("hclk", "f0028000.ethernet", &macb0_clk),
CLKDEV_CON_DEV_ID("pclk", "f0028000.ethernet", &macb0_clk),
CLKDEV_CON_DEV_ID("hclk", "f802c000.ethernet", &macb1_clk),
CLKDEV_CON_DEV_ID("pclk", "f802c000.ethernet", &macb1_clk),
CLKDEV_CON_DEV_ID("pclk", "f0008000.ssc", &ssc0_clk),
CLKDEV_CON_DEV_ID("pclk", "f000c000.ssc", &ssc1_clk),
CLKDEV_CON_DEV_ID("can_clk", "f000c000.can", &can0_clk),
CLKDEV_CON_DEV_ID("can_clk", "f8010000.can", &can1_clk),
CLKDEV_CON_DEV_ID("sha_clk", "f8034000.sha", &sha_clk),
CLKDEV_CON_DEV_ID("aes_clk", "f8038000.aes", &aes_clk),
CLKDEV_CON_DEV_ID("tdes_clk", "f803c000.tdes", &tdes_clk),
};
static void __init sama5d3_register_clocks(void)
{
int i;
for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
clk_register(periph_clocks[i]);
clkdev_add_table(periph_clocks_lookups,
ARRAY_SIZE(periph_clocks_lookups));
clk_register(&pck0);
clk_register(&pck1);
clk_register(&pck2);
}
/* --------------------------------------------------------------------
* AT91SAM9x5 processor initialization
* -------------------------------------------------------------------- */
static void __init sama5d3_map_io(void)
{
at91_init_sram(0, SAMA5D3_SRAM_BASE, SAMA5D3_SRAM_SIZE);
}
AT91_SOC_START(sama5d3)
.map_io = sama5d3_map_io,
.register_clocks = sama5d3_register_clocks,
AT91_SOC_END
arch/arm/mach-at91/setup.c
View file @ a71efd61
......@@ -151,6 +151,11 @@ static void __init soc_detect(u32 dbgu_base)
at91_soc_initdata.type = AT91_SOC_SAM9N12;
at91_boot_soc = at91sam9n12_soc;
break;
case ARCH_ID_SAMA5D3:
at91_soc_initdata.type = AT91_SOC_SAMA5D3;
at91_boot_soc = sama5d3_soc;
break;
}
/* at91sam9g10 */
......@@ -206,6 +211,23 @@ static void __init soc_detect(u32 dbgu_base)
break;
}
}
if (at91_soc_initdata.type == AT91_SOC_SAMA5D3) {
switch (at91_soc_initdata.exid) {
case ARCH_EXID_SAMA5D31:
at91_soc_initdata.subtype = AT91_SOC_SAMA5D31;
break;
case ARCH_EXID_SAMA5D33:
at91_soc_initdata.subtype = AT91_SOC_SAMA5D33;
break;
case ARCH_EXID_SAMA5D34:
at91_soc_initdata.subtype = AT91_SOC_SAMA5D34;
break;
case ARCH_EXID_SAMA5D35:
at91_soc_initdata.subtype = AT91_SOC_SAMA5D35;
break;
}
}
}
static const char *soc_name[] = {
......@@ -219,6 +241,7 @@ static const char *soc_name[] = {
[AT91_SOC_SAM9RL] = "at91sam9rl",
[AT91_SOC_SAM9X5] = "at91sam9x5",
[AT91_SOC_SAM9N12] = "at91sam9n12",
[AT91_SOC_SAMA5D3] = "sama5d3",
[AT91_SOC_NONE] = "Unknown"
};
......@@ -241,6 +264,10 @@ static const char *soc_subtype_name[] = {
[AT91_SOC_SAM9X35] = "at91sam9x35",
[AT91_SOC_SAM9G25] = "at91sam9g25",
[AT91_SOC_SAM9X25] = "at91sam9x25",
[AT91_SOC_SAMA5D31] = "sama5d31",
[AT91_SOC_SAMA5D33] = "sama5d33",
[AT91_SOC_SAMA5D34] = "sama5d34",
[AT91_SOC_SAMA5D35] = "sama5d35",
[AT91_SOC_SUBTYPE_NONE] = "Unknown"
};
......
arch/arm/mach-at91/soc.h
View file @ a71efd61
......@@ -22,9 +22,10 @@ extern struct at91_init_soc at91sam9g45_soc;
extern struct at91_init_soc at91sam9rl_soc;
extern struct at91_init_soc at91sam9x5_soc;
extern struct at91_init_soc at91sam9n12_soc;
extern struct at91_init_soc sama5d3_soc;
#define AT91_SOC_START(_name) \
struct at91_init_soc __initdata at91##_name##_soc \
struct at91_init_soc __initdata _name##_soc \
__used \
= { \
.builtin = 1, \
......@@ -68,3 +69,7 @@ static inline int at91_soc_is_enabled(void)
#if !defined(CONFIG_SOC_AT91SAM9N12)
#define at91sam9n12_soc at91_boot_soc
#endif
#if !defined(CONFIG_SOC_SAMA5D3)
#define sama5d3_soc at91_boot_soc
#endif
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7