Commit a7546159 authored by Nick Hoath's avatar Nick Hoath Committed by Daniel Vetter

drm/i915/bxt: Clean up bxt_init_clock_gating

Add stepping check for A0 workarounds, and remove the associated
FIXME tags.
Split out unrelated WAs for later condition checking.

v2: Fixed format (PeterL)
v3: Corrected stepping check for WaDisableSDEUnitClockGating
    - Ignoring comment, following hardware spec instead. (ChrisH)
    Added description for TILECTL setting (JonB)

Cc: Peter Lawthers <peter.lawthers@intel.com>
Cc: Chris Harris <chris.harris@intel.com>
Cc: Jon Bloomfield <jon.bloomfield@intel.com>
Signed-off-by: default avatarNick Hoath <nicholas.hoath@intel.com>
Reviewed-by: default avatarMika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: default avatarDaniel Vetter <daniel.vetter@ffwll.ch>
parent 614f4ad7
...@@ -116,18 +116,24 @@ static void bxt_init_clock_gating(struct drm_device *dev) ...@@ -116,18 +116,24 @@ static void bxt_init_clock_gating(struct drm_device *dev)
gen9_init_clock_gating(dev); gen9_init_clock_gating(dev);
/* WaDisableSDEUnitClockGating:bxt */
I915_WRITE(GEN8_UCGCTL6, I915_READ(GEN8_UCGCTL6) |
GEN8_SDEUNIT_CLOCK_GATE_DISABLE);
/* /*
* FIXME: * FIXME:
* GEN8_SDEUNIT_CLOCK_GATE_DISABLE applies on A0 only.
* GEN8_HDCUNIT_CLOCK_GATE_DISABLE_HDCREQ applies on 3x6 GT SKUs only. * GEN8_HDCUNIT_CLOCK_GATE_DISABLE_HDCREQ applies on 3x6 GT SKUs only.
*/ */
/* WaDisableSDEUnitClockGating:bxt */
I915_WRITE(GEN8_UCGCTL6, I915_READ(GEN8_UCGCTL6) | I915_WRITE(GEN8_UCGCTL6, I915_READ(GEN8_UCGCTL6) |
GEN8_SDEUNIT_CLOCK_GATE_DISABLE |
GEN8_HDCUNIT_CLOCK_GATE_DISABLE_HDCREQ); GEN8_HDCUNIT_CLOCK_GATE_DISABLE_HDCREQ);
/* FIXME: apply on A0 only */ if (INTEL_REVID(dev) == BXT_REVID_A0) {
/*
* Hardware specification requires this bit to be
* set to 1 for A0
*/
I915_WRITE(TILECTL, I915_READ(TILECTL) | TILECTL_TLBPF); I915_WRITE(TILECTL, I915_READ(TILECTL) | TILECTL_TLBPF);
}
} }
static void i915_pineview_get_mem_freq(struct drm_device *dev) static void i915_pineview_get_mem_freq(struct drm_device *dev)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment