[SCSI] libfc: add FLOGI state to rport for VN2VN

The FIP proposal for VN_port to VN_port point-to-multipoint
operation requires a FLOGI be sent to each remote port.
The FLOGI is sent with the assigned S_ID and D_IDs of the
local and remote ports.  This and the response get
FIP-encapsulated for Ethernet.

Add FLOGI state to the remote port state machine.
This will be skipped if not in point-to-multipoint mode.

To reduce a little duplication between PLOGI and FLOGI
response handling, added fc_rport_login_complete(), which
handles the parameters for the rdata struct.
Signed-off-by: Joe Eykholt <jeykholt@cisco.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

drivers/scsi/libfc/fc_lport.c

@@ -906,10 +906,10 @@ static void fc_lport_recv_req(struct fc_lport *lport, struct fc_seq *sp,
 		recv = lport->tt.rport_recv_req;
 		switch (fc_frame_payload_op(fp)) {
 		case ELS_FLOGI:
+			if (!lport->point_to_multipoint)
 				recv = fc_lport_recv_flogi_req;
 			break;
 		case ELS_LOGO:
-			fh = fc_frame_header_get(fp);
 			if (ntoh24(fh->fh_s_id) == FC_FID_FLOGI)
 				recv = fc_lport_recv_logo_req;
 			break;

include/scsi/fc/fc_els.h

@@ -191,6 +191,7 @@ enum fc_els_rjt_reason {
 	ELS_RJT_UNAB =		0x09,	/* unable to perform command request */
 	ELS_RJT_UNSUP =		0x0b,	/* command not supported */
 	ELS_RJT_INPROG =	0x0e,	/* command already in progress */
+	ELS_RJT_FIP =		0x20,	/* FIP error */
 	ELS_RJT_VENDOR =	0xff,	/* vendor specific error */
 };
 
@@ -212,6 +213,7 @@ enum fc_els_rjt_explan {
 	ELS_EXPL_UNAB_DATA =	0x2a,	/* unable to supply requested data */
 	ELS_EXPL_UNSUPR =	0x2c,	/* Request not supported */
 	ELS_EXPL_INV_LEN =	0x2d,	/* Invalid payload length */
+	ELS_EXPL_NOT_NEIGHBOR = 0x62,	/* VN2VN_Port not in neighbor set */
 	/* TBD - above definitions incomplete */
 };
 

include/scsi/libfc.h

@@ -97,6 +97,8 @@ enum fc_disc_event {
 /**
  * enum fc_rport_state - Remote port states
  * @RPORT_ST_INIT:    Initialized
+ * @RPORT_ST_FLOGI:   Waiting for FLOGI completion for point-to-multipoint
+ * @RPORT_ST_PLOGI_WAIT:   Waiting for peer to login for point-to-multipoint
  * @RPORT_ST_PLOGI:   Waiting for PLOGI completion
  * @RPORT_ST_PRLI:    Waiting for PRLI completion
  * @RPORT_ST_RTV:     Waiting for RTV completion
@@ -107,6 +109,8 @@ enum fc_disc_event {
 */
 enum fc_rport_state {
 	RPORT_ST_INIT,
+	RPORT_ST_FLOGI,
+	RPORT_ST_PLOGI_WAIT,
 	RPORT_ST_PLOGI,
 	RPORT_ST_PRLI,
 	RPORT_ST_RTV,