qlcnic: Support spoof check config.

o Add support for spoof check configuration per VF using
  iproute2 tool.
Signed-off-by: Rajesh Borundia <rajesh.borundia@qlogic.com>
Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c

@@ -449,6 +449,7 @@ static const struct net_device_ops qlcnic_netdev_ops = {
 	.ndo_set_vf_tx_rate	= qlcnic_sriov_set_vf_tx_rate,
 	.ndo_get_vf_config	= qlcnic_sriov_get_vf_config,
 	.ndo_set_vf_vlan	= qlcnic_sriov_set_vf_vlan,
+	.ndo_set_vf_spoofchk	= qlcnic_sriov_set_vf_spoofchk,
 #endif
 };
 

drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov.h

@@ -129,6 +129,7 @@ struct qlcnic_vport {
 	u8			vlan_mode;
 	u16			vlan;
 	u8			qos;
+	bool			spoofchk;
 	u8			mac[6];
 };
 
@@ -225,6 +226,7 @@ int qlcnic_sriov_set_vf_tx_rate(struct net_device *, int, int);
 int qlcnic_sriov_get_vf_config(struct net_device *, int ,
 			       struct ifla_vf_info *);
 int qlcnic_sriov_set_vf_vlan(struct net_device *, int, u16, u8);
+int qlcnic_sriov_set_vf_spoofchk(struct net_device *, int, bool);
 #else
 static inline void qlcnic_sriov_pf_disable(struct qlcnic_adapter *adapter) {}
 static inline void qlcnic_sriov_pf_cleanup(struct qlcnic_adapter *adapter) {}

drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_common.c

@@ -187,6 +187,7 @@ int qlcnic_sriov_init(struct qlcnic_adapter *adapter, int num_vfs)
 			}
 			sriov->vf_info[i].vp = vp;
 			vp->max_tx_bw = MAX_BW;
+			vp->spoofchk = true;
 			random_ether_addr(vp->mac);
 			dev_info(&adapter->pdev->dev,
 				 "MAC Address %pM is configured for VF %d\n",

drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c

@@ -580,6 +580,7 @@ static int qlcnic_sriov_set_vf_acl(struct qlcnic_adapter *adapter, u8 func)
 	struct qlcnic_cmd_args cmd;
 	struct qlcnic_vport *vp;
 	int err, id;
+	u8 *mac;
 
 	id = qlcnic_sriov_func_to_index(adapter, func);
 	if (id < 0)
@@ -591,6 +592,14 @@ static int qlcnic_sriov_set_vf_acl(struct qlcnic_adapter *adapter, u8 func)
 		return err;
 
 	cmd.req.arg[1] = 0x3 | func << 16;
+	if (vp->spoofchk == true) {
+		mac = vp->mac;
+		cmd.req.arg[2] |= BIT_1 | BIT_3 | BIT_8;
+		cmd.req.arg[4] = mac[5] | mac[4] << 8 | mac[3] << 16 |
+				 mac[2] << 24;
+		cmd.req.arg[5] = mac[1] | mac[0] << 8;
+	}
+
 	if (vp->vlan_mode == QLC_PVID_MODE) {
 		cmd.req.arg[2] |= BIT_6;
 		cmd.req.arg[3] |= vp->vlan << 8;
@@ -1767,6 +1776,7 @@ int qlcnic_sriov_get_vf_config(struct net_device *netdev,
 	memcpy(&ivi->mac, vp->mac, ETH_ALEN);
 	ivi->vlan = vp->vlan;
 	ivi->qos = vp->qos;
+	ivi->spoofchk = vp->spoofchk;
 	if (vp->max_tx_bw == MAX_BW)
 		ivi->tx_rate = 0;
 	else
@@ -1775,3 +1785,29 @@ int qlcnic_sriov_get_vf_config(struct net_device *netdev,
 	ivi->vf = vf;
 	return 0;
 }
+
+int qlcnic_sriov_set_vf_spoofchk(struct net_device *netdev, int vf, bool chk)
+{
+	struct qlcnic_adapter *adapter = netdev_priv(netdev);
+	struct qlcnic_sriov *sriov = adapter->ahw->sriov;
+	struct qlcnic_vf_info *vf_info;
+	struct qlcnic_vport *vp;
+
+	if (!qlcnic_sriov_pf_check(adapter))
+		return -EOPNOTSUPP;
+
+	if (vf >= sriov->num_vfs)
+		return -EINVAL;
+
+	vf_info = &sriov->vf_info[vf];
+	vp = vf_info->vp;
+	if (test_bit(QLC_BC_VF_STATE, &vf_info->state)) {
+		netdev_err(netdev,
+			   "Spoof check change failed for VF %d, as VF driver is loaded. Please unload VF driver and retry the operation\n",
+			   vf);
+		return -EOPNOTSUPP;
+	}
+
+	vp->spoofchk = chk;
+	return 0;
+}