staging: iio: ad5933: align arguments on new line with open parenthesis

Issue found by checkpatch: "Alignment should match open parenthesis."
Multiple lines are also reduced to a single line where possible.
Signed-off-by: Katie Dunne <kdunne@mail.ccsf.edu>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

drivers/staging/iio/impedance-analyzer/ad5933.c

@@ -156,8 +156,7 @@ static const struct iio_chan_spec ad5933_channels[] = {
 	},
 };
 
-static int ad5933_i2c_write(struct i2c_client *client,
-			      u8 reg, u8 len, u8 *data)
+static int ad5933_i2c_write(struct i2c_client *client, u8 reg, u8 len, u8 *data)
 {
 	int ret;
 
@@ -171,8 +170,7 @@ static int ad5933_i2c_write(struct i2c_client *client,
 	return 0;
 }
 
-static int ad5933_i2c_read(struct i2c_client *client,
-			      u8 reg, u8 len, u8 *data)
+static int ad5933_i2c_read(struct i2c_client *client, u8 reg, u8 len, u8 *data)
 {
 	int ret;
 
@@ -269,7 +267,8 @@ static int ad5933_setup(struct ad5933_state *st)
 	dat = cpu_to_be16(st->settling_cycles);
 
 	ret = ad5933_i2c_write(st->client,
-			AD5933_REG_SETTLING_CYCLES, 2, (u8 *)&dat);
+			       AD5933_REG_SETTLING_CYCLES,
+			       2, (u8 *)&dat);
 	if (ret < 0)
 		return ret;
 
@@ -451,7 +450,8 @@ static ssize_t ad5933_store(struct device *dev,
 
 		dat = cpu_to_be16(val);
 		ret = ad5933_i2c_write(st->client,
-				AD5933_REG_SETTLING_CYCLES, 2, (u8 *)&dat);
+				       AD5933_REG_SETTLING_CYCLES,
+				       2, (u8 *)&dat);
 		break;
 	case AD5933_FREQ_POINTS:
 		val = clamp(val, (u16)0, (u16)511);
@@ -545,8 +545,8 @@ static int ad5933_read_raw(struct iio_dev *indio_dev,
 			goto out;
 
 		ret = ad5933_i2c_read(st->client,
-				AD5933_REG_TEMP_DATA, 2,
-				(u8 *)&dat);
+				      AD5933_REG_TEMP_DATA,
+				      2, (u8 *)&dat);
 		if (ret < 0)
 			goto out;
 		mutex_unlock(&indio_dev->mlock);