arm64/sme: Document boot requirements for SME

Document our requirements for initialisation of the Scalable Matrix
Extension (SME) at kernel start. While we do have the ability to handle
mismatched vector lengths we will reject any late CPUs that can't support
the minimum set we determine at boot so for clarity we document a
requirement that all CPUs make the same vector length available.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20210720204220.22951-1-broonie@kernel.orgSigned-off-by: Catalin Marinas <catalin.marinas@arm.com>

Documentation/arm64/booting.rst

@@ -311,6 +311,28 @@ Before jumping into the kernel, the following conditions must be met:
     - ZCR_EL2.LEN must be initialised to the same value for all CPUs the
       kernel will execute on.
 
+  For CPUs with the Scalable Matrix Extension (FEAT_SME):
+
+  - If EL3 is present:
+
+    - CPTR_EL3.ESM (bit 12) must be initialised to 0b1.
+
+    - SCR_EL3.EnTP2 (bit 41) must be initialised to 0b1.
+
+    - SMCR_EL3.LEN must be initialised to the same value for all CPUs the
+      kernel will execute on.
+
+ - If the kernel is entered at EL1 and EL2 is present:
+
+    - CPTR_EL2.TSM (bit 12) must be initialised to 0b0.
+
+    - CPTR_EL2.SMEN (bits 25:24) must be initialised to 0b11.
+
+    - SCTLR_EL2.EnTP2 (bit 60) must be initialised to 0b1.
+
+    - SMCR_EL2.LEN must be initialised to the same value for all CPUs the
+      kernel will execute on.
+
 The requirements described above for CPU mode, caches, MMUs, architected
 timers, coherency and system registers apply to all CPUs.  All CPUs must
 enter the kernel in the same exception level.  Where the values documented