Commit a8cd2e50 authored by Linus Torvalds's avatar Linus Torvalds

Merge master.kernel.org:/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog

parents 0160f53e c315b7e8
......@@ -84,6 +84,17 @@ config 977_WATCHDOG
Not sure? It's safe to say N.
config IXP2000_WATCHDOG
tristate "IXP2000 Watchdog"
depends on WATCHDOG && ARCH_IXP2000
help
Say Y here if to include support for the watchdog timer
in the Intel IXP2000(2400, 2800, 2850) network processors.
This driver can be built as a module by choosing M. The module
will be called ixp2000_wdt.
Say N if you are unsure.
config IXP4XX_WATCHDOG
tristate "IXP4xx Watchdog"
depends on WATCHDOG && ARCH_IXP4XX
......@@ -100,17 +111,6 @@ config IXP4XX_WATCHDOG
Say N if you are unsure.
config IXP2000_WATCHDOG
tristate "IXP2000 Watchdog"
depends on WATCHDOG && ARCH_IXP2000
help
Say Y here if to include support for the watchdog timer
in the Intel IXP2000(2400, 2800, 2850) network processors.
This driver can be built as a module by choosing M. The module
will be called ixp2000_wdt.
Say N if you are unsure.
config S3C2410_WATCHDOG
tristate "S3C2410 Watchdog"
depends on WATCHDOG && ARCH_S3C2410
......@@ -233,6 +233,16 @@ config IB700_WDT
Most people will say N.
config IBMASR
tristate "IBM Automatic Server Restart"
depends on WATCHDOG && X86
help
This is the driver for the IBM Automatic Server Restart watchdog
timer builtin into some eServer xSeries machines.
To compile this driver as a module, choose M here: the
module will be called ibmasr.
config WAFER_WDT
tristate "ICP Wafer 5823 Single Board Computer Watchdog"
depends on WATCHDOG && X86
......@@ -243,6 +253,16 @@ config WAFER_WDT
To compile this driver as a module, choose M here: the
module will be called wafer5823wdt.
config I6300ESB_WDT
tristate "Intel 6300ESB Timer/Watchdog"
depends on WATCHDOG && X86 && PCI
---help---
Hardware driver for the watchdog timer built into the Intel
6300ESB controller hub.
To compile this driver as a module, choose M here: the
module will be called i6300esb.
config I8XX_TCO
tristate "Intel i8xx TCO Timer/Watchdog"
depends on WATCHDOG && (X86 || IA64) && PCI
......@@ -298,6 +318,19 @@ config 60XX_WDT
You can compile this driver directly into the kernel, or use
it as a module. The module will be called sbc60xxwdt.
config SBC8360_WDT
tristate "SBC8360 Watchdog Timer"
depends on WATCHDOG && X86
---help---
This is the driver for the hardware watchdog on the SBC8360 Single
Board Computer produced by Axiomtek Co., Ltd. (www.axiomtek.com).
To compile this driver as a module, choose M here: the
module will be called sbc8360.ko.
Most people will say N.
config CPU5_WDT
tristate "SMA CPU5 Watchdog"
depends on WATCHDOG && X86
......@@ -336,6 +369,19 @@ config W83877F_WDT
Most people will say N.
config W83977F_WDT
tristate "W83977F (PCM-5335) Watchdog Timer"
depends on WATCHDOG && X86
---help---
This is the driver for the hardware watchdog on the W83977F I/O chip
as used in AAEON's PCM-5335 SBC (and likely others). This
watchdog simply watches your kernel to make sure it doesn't freeze,
and if it does, it reboots your computer after a certain amount of
time.
To compile this driver as a module, choose M here: the
module will be called w83977f_wdt.
config MACHZ_WDT
tristate "ZF MachZ Watchdog"
depends on WATCHDOG && X86
......@@ -355,6 +401,10 @@ config 8xx_WDT
tristate "MPC8xx Watchdog Timer"
depends on WATCHDOG && 8xx
config MV64X60_WDT
tristate "MV64X60 (Marvell Discovery) Watchdog Timer"
depends on WATCHDOG && MV64X60
config BOOKE_WDT
tristate "PowerPC Book-E Watchdog Timer"
depends on WATCHDOG && (BOOKE || 4xx)
......@@ -362,6 +412,17 @@ config BOOKE_WDT
Please see Documentation/watchdog/watchdog-api.txt for
more information.
# PPC64 Architecture
config WATCHDOG_RTAS
tristate "RTAS watchdog"
depends on WATCHDOG && PPC_RTAS
help
This driver adds watchdog support for the RTAS watchdog.
To compile this driver as a module, choose M here. The module
will be called wdrtas.
# MIPS Architecture
config INDYDOG
......@@ -430,16 +491,6 @@ config WATCHDOG_RIO
machines. The watchdog timeout period is normally one minute but
can be changed with a boot-time parameter.
# ppc64 RTAS watchdog
config WATCHDOG_RTAS
tristate "RTAS watchdog"
depends on WATCHDOG && PPC_RTAS
help
This driver adds watchdog support for the RTAS watchdog.
To compile this driver as a module, choose M here. The module
will be called wdrtas.
#
# ISA-based Watchdog Cards
#
......
......@@ -39,22 +39,27 @@ obj-$(CONFIG_ALIM7101_WDT) += alim7101_wdt.o
obj-$(CONFIG_SC520_WDT) += sc520_wdt.o
obj-$(CONFIG_EUROTECH_WDT) += eurotechwdt.o
obj-$(CONFIG_IB700_WDT) += ib700wdt.o
obj-$(CONFIG_IBMASR) += ibmasr.o
obj-$(CONFIG_WAFER_WDT) += wafer5823wdt.o
obj-$(CONFIG_I6300ESB_WDT) += i6300esb.o
obj-$(CONFIG_I8XX_TCO) += i8xx_tco.o
obj-$(CONFIG_SC1200_WDT) += sc1200wdt.o
obj-$(CONFIG_SCx200_WDT) += scx200_wdt.o
obj-$(CONFIG_60XX_WDT) += sbc60xxwdt.o
obj-$(CONFIG_SBC8360_WDT) += sbc8360.o
obj-$(CONFIG_CPU5_WDT) += cpu5wdt.o
obj-$(CONFIG_W83627HF_WDT) += w83627hf_wdt.o
obj-$(CONFIG_W83877F_WDT) += w83877f_wdt.o
obj-$(CONFIG_W83977F_WDT) += w83977f_wdt.o
obj-$(CONFIG_MACHZ_WDT) += machzwd.o
# PowerPC Architecture
obj-$(CONFIG_8xx_WDT) += mpc8xx_wdt.o
obj-$(CONFIG_MV64X60_WDT) += mv64x60_wdt.o
obj-$(CONFIG_BOOKE_WDT) += booke_wdt.o
# PPC64 Architecture
obj-$(CONFIG_WATCHDOG_RTAS) += wdrtas.o
obj-$(CONFIG_BOOKE_WDT) += booke_wdt.o
# MIPS Architecture
obj-$(CONFIG_INDYDOG) += indydog.o
......
/*
* i6300esb: Watchdog timer driver for Intel 6300ESB chipset
*
* (c) Copyright 2004 Google Inc.
* (c) Copyright 2005 David Hrdeman <david@2gen.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*
* based on i810-tco.c which is in turn based on softdog.c
*
* The timer is implemented in the following I/O controller hubs:
* (See the intel documentation on http://developer.intel.com.)
* 6300ESB chip : document number 300641-003
*
* 2004YYZZ Ross Biro
* Initial version 0.01
* 2004YYZZ Ross Biro
* Version 0.02
* 20050210 David Hrdeman <david@2gen.com>
* Ported driver to kernel 2.6
*/
/*
* Includes, defines, variables, module parameters, ...
*/
#include <linux/module.h>
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/fs.h>
#include <linux/mm.h>
#include <linux/miscdevice.h>
#include <linux/watchdog.h>
#include <linux/reboot.h>
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/ioport.h>
#include <asm/uaccess.h>
#include <asm/io.h>
/* Module and version information */
#define ESB_VERSION "0.03"
#define ESB_MODULE_NAME "i6300ESB timer"
#define ESB_DRIVER_NAME ESB_MODULE_NAME ", v" ESB_VERSION
#define PFX ESB_MODULE_NAME ": "
/* PCI configuration registers */
#define ESB_CONFIG_REG 0x60 /* Config register */
#define ESB_LOCK_REG 0x68 /* WDT lock register */
/* Memory mapped registers */
#define ESB_TIMER1_REG BASEADDR + 0x00 /* Timer1 value after each reset */
#define ESB_TIMER2_REG BASEADDR + 0x04 /* Timer2 value after each reset */
#define ESB_GINTSR_REG BASEADDR + 0x08 /* General Interrupt Status Register */
#define ESB_RELOAD_REG BASEADDR + 0x0c /* Reload register */
/* Lock register bits */
#define ESB_WDT_FUNC ( 0x01 << 2 ) /* Watchdog functionality */
#define ESB_WDT_ENABLE ( 0x01 << 1 ) /* Enable WDT */
#define ESB_WDT_LOCK ( 0x01 << 0 ) /* Lock (nowayout) */
/* Config register bits */
#define ESB_WDT_REBOOT ( 0x01 << 5 ) /* Enable reboot on timeout */
#define ESB_WDT_FREQ ( 0x01 << 2 ) /* Decrement frequency */
#define ESB_WDT_INTTYPE ( 0x11 << 0 ) /* Interrupt type on timer1 timeout */
/* Reload register bits */
#define ESB_WDT_RELOAD ( 0x01 << 8 ) /* prevent timeout */
/* Magic constants */
#define ESB_UNLOCK1 0x80 /* Step 1 to unlock reset registers */
#define ESB_UNLOCK2 0x86 /* Step 2 to unlock reset registers */
/* internal variables */
static void __iomem *BASEADDR;
static spinlock_t esb_lock; /* Guards the hardware */
static unsigned long timer_alive;
static struct pci_dev *esb_pci;
static unsigned short triggered; /* The status of the watchdog upon boot */
static char esb_expect_close;
/* module parameters */
#define WATCHDOG_HEARTBEAT 30 /* 30 sec default heartbeat (1<heartbeat<2*1023) */
static int heartbeat = WATCHDOG_HEARTBEAT; /* in seconds */
module_param(heartbeat, int, 0);
MODULE_PARM_DESC(heartbeat, "Watchdog heartbeat in seconds. (1<heartbeat<2046, default=" __MODULE_STRING(WATCHDOG_HEARTBEAT) ")");
static int nowayout = WATCHDOG_NOWAYOUT;
module_param(nowayout, int, 0);
MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=CONFIG_WATCHDOG_NOWAYOUT)");
/*
* Some i6300ESB specific functions
*/
/*
* Prepare for reloading the timer by unlocking the proper registers.
* This is performed by first writing 0x80 followed by 0x86 to the
* reload register. After this the appropriate registers can be written
* to once before they need to be unlocked again.
*/
static inline void esb_unlock_registers(void) {
writeb(ESB_UNLOCK1, ESB_RELOAD_REG);
writeb(ESB_UNLOCK2, ESB_RELOAD_REG);
}
static void esb_timer_start(void)
{
u8 val;
/* Enable or Enable + Lock? */
val = 0x02 | (nowayout ? 0x01 : 0x00);
pci_write_config_byte(esb_pci, ESB_LOCK_REG, val);
}
static int esb_timer_stop(void)
{
u8 val;
spin_lock(&esb_lock);
/* First, reset timers as suggested by the docs */
esb_unlock_registers();
writew(ESB_WDT_RELOAD, ESB_RELOAD_REG);
/* Then disable the WDT */
pci_write_config_byte(esb_pci, ESB_LOCK_REG, 0x0);
pci_read_config_byte(esb_pci, ESB_LOCK_REG, &val);
spin_unlock(&esb_lock);
/* Returns 0 if the timer was disabled, non-zero otherwise */
return (val & 0x01);
}
static void esb_timer_keepalive(void)
{
spin_lock(&esb_lock);
esb_unlock_registers();
writew(ESB_WDT_RELOAD, ESB_RELOAD_REG);
/* FIXME: Do we need to flush anything here? */
spin_unlock(&esb_lock);
}
static int esb_timer_set_heartbeat(int time)
{
u32 val;
if (time < 0x1 || time > (2 * 0x03ff))
return -EINVAL;
spin_lock(&esb_lock);
/* We shift by 9, so if we are passed a value of 1 sec,
* val will be 1 << 9 = 512, then write that to two
* timers => 2 * 512 = 1024 (which is decremented at 1KHz)
*/
val = time << 9;
/* Write timer 1 */
esb_unlock_registers();
writel(val, ESB_TIMER1_REG);
/* Write timer 2 */
esb_unlock_registers();
writel(val, ESB_TIMER2_REG);
/* Reload */
esb_unlock_registers();
writew(ESB_WDT_RELOAD, ESB_RELOAD_REG);
/* FIXME: Do we need to flush everything out? */
/* Done */
heartbeat = time;
spin_unlock(&esb_lock);
return 0;
}
static int esb_timer_read (void)
{
u32 count;
/* This isn't documented, and doesn't take into
* acount which stage is running, but it looks
* like a 20 bit count down, so we might as well report it.
*/
pci_read_config_dword(esb_pci, 0x64, &count);
return (int)count;
}
/*
* /dev/watchdog handling
*/
static int esb_open (struct inode *inode, struct file *file)
{
/* /dev/watchdog can only be opened once */
if (test_and_set_bit(0, &timer_alive))
return -EBUSY;
/* Reload and activate timer */
esb_timer_keepalive ();
esb_timer_start ();
return nonseekable_open(inode, file);
}
static int esb_release (struct inode *inode, struct file *file)
{
/* Shut off the timer. */
if (esb_expect_close == 42) {
esb_timer_stop ();
} else {
printk(KERN_CRIT PFX "Unexpected close, not stopping watchdog!\n");
esb_timer_keepalive ();
}
clear_bit(0, &timer_alive);
esb_expect_close = 0;
return 0;
}
static ssize_t esb_write (struct file *file, const char __user *data,
size_t len, loff_t * ppos)
{
/* See if we got the magic character 'V' and reload the timer */
if (len) {
if (!nowayout) {
size_t i;
/* note: just in case someone wrote the magic character
* five months ago... */
esb_expect_close = 0;
/* scan to see whether or not we got the magic character */
for (i = 0; i != len; i++) {
char c;
if(get_user(c, data+i))
return -EFAULT;
if (c == 'V')
esb_expect_close = 42;
}
}
/* someone wrote to us, we should reload the timer */
esb_timer_keepalive ();
}
return len;
}
static int esb_ioctl (struct inode *inode, struct file *file,
unsigned int cmd, unsigned long arg)
{
int new_options, retval = -EINVAL;
int new_heartbeat;
void __user *argp = (void __user *)arg;
int __user *p = argp;
static struct watchdog_info ident = {
.options = WDIOF_SETTIMEOUT |
WDIOF_KEEPALIVEPING |
WDIOF_MAGICCLOSE,
.firmware_version = 0,
.identity = ESB_MODULE_NAME,
};
switch (cmd) {
case WDIOC_GETSUPPORT:
return copy_to_user(argp, &ident,
sizeof (ident)) ? -EFAULT : 0;
case WDIOC_GETSTATUS:
return put_user (esb_timer_read(), p);
case WDIOC_GETBOOTSTATUS:
return put_user (triggered, p);
case WDIOC_KEEPALIVE:
esb_timer_keepalive ();
return 0;
case WDIOC_SETOPTIONS:
{
if (get_user (new_options, p))
return -EFAULT;
if (new_options & WDIOS_DISABLECARD) {
esb_timer_stop ();
retval = 0;
}
if (new_options & WDIOS_ENABLECARD) {
esb_timer_keepalive ();
esb_timer_start ();
retval = 0;
}
return retval;
}
case WDIOC_SETTIMEOUT:
{
if (get_user(new_heartbeat, p))
return -EFAULT;
if (esb_timer_set_heartbeat(new_heartbeat))
return -EINVAL;
esb_timer_keepalive ();
/* Fall */
}
case WDIOC_GETTIMEOUT:
return put_user(heartbeat, p);
default:
return -ENOIOCTLCMD;
}
}
/*
* Notify system
*/
static int esb_notify_sys (struct notifier_block *this, unsigned long code, void *unused)
{
if (code==SYS_DOWN || code==SYS_HALT) {
/* Turn the WDT off */
esb_timer_stop ();
}
return NOTIFY_DONE;
}
/*
* Kernel Interfaces
*/
static struct file_operations esb_fops = {
.owner = THIS_MODULE,
.llseek = no_llseek,
.write = esb_write,
.ioctl = esb_ioctl,
.open = esb_open,
.release = esb_release,
};
static struct miscdevice esb_miscdev = {
.minor = WATCHDOG_MINOR,
.name = "watchdog",
.fops = &esb_fops,
};
static struct notifier_block esb_notifier = {
.notifier_call = esb_notify_sys,
};
/*
* Data for PCI driver interface
*
* This data only exists for exporting the supported
* PCI ids via MODULE_DEVICE_TABLE. We do not actually
* register a pci_driver, because someone else might one day
* want to register another driver on the same PCI id.
*/
static struct pci_device_id esb_pci_tbl[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_9), },
{ 0, }, /* End of list */
};
MODULE_DEVICE_TABLE (pci, esb_pci_tbl);
/*
* Init & exit routines
*/
static unsigned char __init esb_getdevice (void)
{
u8 val1;
unsigned short val2;
struct pci_dev *dev = NULL;
/*
* Find the PCI device
*/
for_each_pci_dev(dev) {
if (pci_match_id(esb_pci_tbl, dev)) {
esb_pci = dev;
break;
}
}
if (esb_pci) {
if (pci_enable_device(esb_pci)) {
printk (KERN_ERR PFX "failed to enable device\n");
goto err_devput;
}
if (pci_request_region(esb_pci, 0, ESB_MODULE_NAME)) {
printk (KERN_ERR PFX "failed to request region\n");
goto err_disable;
}
BASEADDR = ioremap(pci_resource_start(esb_pci, 0),
pci_resource_len(esb_pci, 0));
if (BASEADDR == NULL) {
/* Something's wrong here, BASEADDR has to be set */
printk (KERN_ERR PFX "failed to get BASEADDR\n");
goto err_release;
}
/*
* The watchdog has two timers, it can be setup so that the
* expiry of timer1 results in an interrupt and the expiry of
* timer2 results in a reboot. We set it to not generate
* any interrupts as there is not much we can do with it
* right now.
*
* We also enable reboots and set the timer frequency to
* the PCI clock divided by 2^15 (approx 1KHz).
*/
pci_write_config_word(esb_pci, ESB_CONFIG_REG, 0x0003);
/* Check that the WDT isn't already locked */
pci_read_config_byte(esb_pci, ESB_LOCK_REG, &val1);
if (val1 & ESB_WDT_LOCK)
printk (KERN_WARNING PFX "nowayout already set\n");
/* Set the timer to watchdog mode and disable it for now */
pci_write_config_byte(esb_pci, ESB_LOCK_REG, 0x00);
/* Check if the watchdog was previously triggered */
esb_unlock_registers();
val2 = readw(ESB_RELOAD_REG);
triggered = (val2 & (0x01 << 9) >> 9);
/* Reset trigger flag and timers */
esb_unlock_registers();
writew((0x11 << 8), ESB_RELOAD_REG);
/* Done */
return 1;
err_release:
pci_release_region(esb_pci, 0);
err_disable:
pci_disable_device(esb_pci);
err_devput:
pci_dev_put(esb_pci);
}
return 0;
}
static int __init watchdog_init (void)
{
int ret;
spin_lock_init(&esb_lock);
/* Check whether or not the hardware watchdog is there */
if (!esb_getdevice () || esb_pci == NULL)
return -ENODEV;
/* Check that the heartbeat value is within it's range ; if not reset to the default */
if (esb_timer_set_heartbeat (heartbeat)) {
esb_timer_set_heartbeat (WATCHDOG_HEARTBEAT);
printk(KERN_INFO PFX "heartbeat value must be 1<heartbeat<2046, using %d\n",
heartbeat);
}
ret = register_reboot_notifier(&esb_notifier);
if (ret != 0) {
printk(KERN_ERR PFX "cannot register reboot notifier (err=%d)\n",
ret);
goto err_unmap;
}
ret = misc_register(&esb_miscdev);
if (ret != 0) {
printk(KERN_ERR PFX "cannot register miscdev on minor=%d (err=%d)\n",
WATCHDOG_MINOR, ret);
goto err_notifier;
}
esb_timer_stop ();
printk (KERN_INFO PFX "initialized (0x%p). heartbeat=%d sec (nowayout=%d)\n",
BASEADDR, heartbeat, nowayout);
return 0;
err_notifier:
unregister_reboot_notifier(&esb_notifier);
err_unmap:
iounmap(BASEADDR);
/* err_release: */
pci_release_region(esb_pci, 0);
/* err_disable: */
pci_disable_device(esb_pci);
/* err_devput: */
pci_dev_put(esb_pci);
return ret;
}
static void __exit watchdog_cleanup (void)
{
/* Stop the timer before we leave */
if (!nowayout)
esb_timer_stop ();
/* Deregister */
misc_deregister(&esb_miscdev);
unregister_reboot_notifier(&esb_notifier);
iounmap(BASEADDR);
pci_release_region(esb_pci, 0);
pci_disable_device(esb_pci);
pci_dev_put(esb_pci);
}
module_init(watchdog_init);
module_exit(watchdog_cleanup);
MODULE_AUTHOR("Ross Biro and David Hrdeman");
MODULE_DESCRIPTION("Watchdog driver for Intel 6300ESB chipsets");
MODULE_LICENSE("GPL");
MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
/*
* IBM Automatic Server Restart driver.
*
* Copyright (c) 2005 Andrey Panin <pazke@donpac.ru>
*
* Based on driver written by Pete Reynolds.
* Copyright (c) IBM Corporation, 1998-2004.
*
* This software may be used and distributed according to the terms
* of the GNU Public License, incorporated herein by reference.
*/
#include <linux/config.h>
#include <linux/fs.h>
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/timer.h>
#include <linux/miscdevice.h>
#include <linux/watchdog.h>
#include <linux/dmi.h>
#include <asm/io.h>
#include <asm/uaccess.h>
enum {
ASMTYPE_UNKNOWN,
ASMTYPE_TOPAZ,
ASMTYPE_JASPER,
ASMTYPE_PEARL,
ASMTYPE_JUNIPER,
ASMTYPE_SPRUCE,
};
#define PFX "ibmasr: "
#define TOPAZ_ASR_REG_OFFSET 4
#define TOPAZ_ASR_TOGGLE 0x40
#define TOPAZ_ASR_DISABLE 0x80
/* PEARL ASR S/W REGISTER SUPERIO PORT ADDRESSES */
#define PEARL_BASE 0xe04
#define PEARL_WRITE 0xe06
#define PEARL_READ 0xe07
#define PEARL_ASR_DISABLE_MASK 0x80 /* bit 7: disable = 1, enable = 0 */
#define PEARL_ASR_TOGGLE_MASK 0x40 /* bit 6: 0, then 1, then 0 */
/* JASPER OFFSET FROM SIO BASE ADDR TO ASR S/W REGISTERS. */
#define JASPER_ASR_REG_OFFSET 0x38
#define JASPER_ASR_DISABLE_MASK 0x01 /* bit 0: disable = 1, enable = 0 */
#define JASPER_ASR_TOGGLE_MASK 0x02 /* bit 1: 0, then 1, then 0 */
#define JUNIPER_BASE_ADDRESS 0x54b /* Base address of Juniper ASR */
#define JUNIPER_ASR_DISABLE_MASK 0x01 /* bit 0: disable = 1 enable = 0 */
#define JUNIPER_ASR_TOGGLE_MASK 0x02 /* bit 1: 0, then 1, then 0 */
#define SPRUCE_BASE_ADDRESS 0x118e /* Base address of Spruce ASR */
#define SPRUCE_ASR_DISABLE_MASK 0x01 /* bit 1: disable = 1 enable = 0 */
#define SPRUCE_ASR_TOGGLE_MASK 0x02 /* bit 0: 0, then 1, then 0 */
static int nowayout = WATCHDOG_NOWAYOUT;
static unsigned long asr_is_open;
static char asr_expect_close;
static unsigned int asr_type, asr_base, asr_length;
static unsigned int asr_read_addr, asr_write_addr;
static unsigned char asr_toggle_mask, asr_disable_mask;
static void asr_toggle(void)
{
unsigned char reg = inb(asr_read_addr);
outb(reg & ~asr_toggle_mask, asr_write_addr);
reg = inb(asr_read_addr);
outb(reg | asr_toggle_mask, asr_write_addr);
reg = inb(asr_read_addr);
outb(reg & ~asr_toggle_mask, asr_write_addr);
reg = inb(asr_read_addr);
}
static void asr_enable(void)
{
unsigned char reg;
if (asr_type == ASMTYPE_TOPAZ) {
/* asr_write_addr == asr_read_addr */
reg = inb(asr_read_addr);
outb(reg & ~(TOPAZ_ASR_TOGGLE | TOPAZ_ASR_DISABLE),
asr_read_addr);
} else {
/*
* First make sure the hardware timer is reset by toggling
* ASR hardware timer line.
*/
asr_toggle();
reg = inb(asr_read_addr);
outb(reg & ~asr_disable_mask, asr_write_addr);
}
reg = inb(asr_read_addr);
}
static void asr_disable(void)
{
unsigned char reg = inb(asr_read_addr);
if (asr_type == ASMTYPE_TOPAZ)
/* asr_write_addr == asr_read_addr */
outb(reg | TOPAZ_ASR_TOGGLE | TOPAZ_ASR_DISABLE,
asr_read_addr);
else {
outb(reg | asr_toggle_mask, asr_write_addr);
reg = inb(asr_read_addr);
outb(reg | asr_disable_mask, asr_write_addr);
}
reg = inb(asr_read_addr);
}
static int __init asr_get_base_address(void)
{
unsigned char low, high;
const char *type = "";
asr_length = 1;
switch (asr_type) {
case ASMTYPE_TOPAZ:
/* SELECT SuperIO CHIP FOR QUERYING (WRITE 0x07 TO BOTH 0x2E and 0x2F) */
outb(0x07, 0x2e);
outb(0x07, 0x2f);
/* SELECT AND READ THE HIGH-NIBBLE OF THE GPIO BASE ADDRESS */
outb(0x60, 0x2e);
high = inb(0x2f);
/* SELECT AND READ THE LOW-NIBBLE OF THE GPIO BASE ADDRESS */
outb(0x61, 0x2e);
low = inb(0x2f);
asr_base = (high << 16) | low;
asr_read_addr = asr_write_addr =
asr_base + TOPAZ_ASR_REG_OFFSET;
asr_length = 5;
break;
case ASMTYPE_JASPER:
type = "Jaspers ";
/* FIXME: need to use pci_config_lock here, but it's not exported */
/* spin_lock_irqsave(&pci_config_lock, flags);*/
/* Select the SuperIO chip in the PCI I/O port register */
outl(0x8000f858, 0xcf8);
/*
* Read the base address for the SuperIO chip.
* Only the lower 16 bits are valid, but the address is word
* aligned so the last bit must be masked off.
*/
asr_base = inl(0xcfc) & 0xfffe;
/* spin_unlock_irqrestore(&pci_config_lock, flags);*/
asr_read_addr = asr_write_addr =
asr_base + JASPER_ASR_REG_OFFSET;
asr_toggle_mask = JASPER_ASR_TOGGLE_MASK;
asr_disable_mask = JASPER_ASR_DISABLE_MASK;
asr_length = JASPER_ASR_REG_OFFSET + 1;
break;
case ASMTYPE_PEARL:
type = "Pearls ";
asr_base = PEARL_BASE;
asr_read_addr = PEARL_READ;
asr_write_addr = PEARL_WRITE;
asr_toggle_mask = PEARL_ASR_TOGGLE_MASK;
asr_disable_mask = PEARL_ASR_DISABLE_MASK;
asr_length = 4;
break;
case ASMTYPE_JUNIPER:
type = "Junipers ";
asr_base = JUNIPER_BASE_ADDRESS;
asr_read_addr = asr_write_addr = asr_base;
asr_toggle_mask = JUNIPER_ASR_TOGGLE_MASK;
asr_disable_mask = JUNIPER_ASR_DISABLE_MASK;
break;
case ASMTYPE_SPRUCE:
type = "Spruce's ";
asr_base = SPRUCE_BASE_ADDRESS;
asr_read_addr = asr_write_addr = asr_base;
asr_toggle_mask = SPRUCE_ASR_TOGGLE_MASK;
asr_disable_mask = SPRUCE_ASR_DISABLE_MASK;
break;
}
if (!request_region(asr_base, asr_length, "ibmasr")) {
printk(KERN_ERR PFX "address %#x already in use\n",
asr_base);
return -EBUSY;
}
printk(KERN_INFO PFX "found %sASR @ addr %#x\n", type, asr_base);
return 0;
}
static ssize_t asr_write(struct file *file, const char __user *buf,
size_t count, loff_t *ppos)
{
if (count) {
if (!nowayout) {
size_t i;
/* In case it was set long ago */
asr_expect_close = 0;
for (i = 0; i != count; i++) {
char c;
if (get_user(c, buf + i))
return -EFAULT;
if (c == 'V')
asr_expect_close = 42;
}
}
asr_toggle();
}
return count;
}
static int asr_ioctl(struct inode *inode, struct file *file,
unsigned int cmd, unsigned long arg)
{
static const struct watchdog_info ident = {
.options = WDIOF_KEEPALIVEPING |
WDIOF_MAGICCLOSE,
.identity = "IBM ASR"
};
void __user *argp = (void __user *)arg;
int __user *p = argp;
int heartbeat;
switch (cmd) {
case WDIOC_GETSUPPORT:
return copy_to_user(argp, &ident, sizeof(ident)) ?
-EFAULT : 0;
case WDIOC_GETSTATUS:
case WDIOC_GETBOOTSTATUS:
return put_user(0, p);
case WDIOC_KEEPALIVE:
asr_toggle();
return 0;
/*
* The hardware has a fixed timeout value, so no WDIOC_SETTIMEOUT
* and WDIOC_GETTIMEOUT always returns 256.
*/
case WDIOC_GETTIMEOUT:
heartbeat = 256;
return put_user(heartbeat, p);
case WDIOC_SETOPTIONS: {
int new_options, retval = -EINVAL;
if (get_user(new_options, p))
return -EFAULT;
if (new_options & WDIOS_DISABLECARD) {
asr_disable();
retval = 0;
}
if (new_options & WDIOS_ENABLECARD) {
asr_enable();
asr_toggle();
retval = 0;
}
return retval;
}
}
return -ENOIOCTLCMD;
}
static int asr_open(struct inode *inode, struct file *file)
{
if(test_and_set_bit(0, &asr_is_open))
return -EBUSY;
asr_toggle();
asr_enable();
return nonseekable_open(inode, file);
}
static int asr_release(struct inode *inode, struct file *file)
{
if (asr_expect_close == 42)
asr_disable();
else {
printk(KERN_CRIT PFX "unexpected close, not stopping watchdog!\n");
asr_toggle();
}
clear_bit(0, &asr_is_open);
asr_expect_close = 0;
return 0;
}
static struct file_operations asr_fops = {
.owner = THIS_MODULE,
.llseek = no_llseek,
.write = asr_write,
.ioctl = asr_ioctl,
.open = asr_open,
.release = asr_release,
};
static struct miscdevice asr_miscdev = {
.minor = WATCHDOG_MINOR,
.name = "watchdog",
.fops = &asr_fops,
};
struct ibmasr_id {
const char *desc;
int type;
};
static struct ibmasr_id __initdata ibmasr_id_table[] = {
{ "IBM Automatic Server Restart - eserver xSeries 220", ASMTYPE_TOPAZ },
{ "IBM Automatic Server Restart - Machine Type 8673", ASMTYPE_PEARL },
{ "IBM Automatic Server Restart - Machine Type 8480", ASMTYPE_JASPER },
{ "IBM Automatic Server Restart - Machine Type 8482", ASMTYPE_JUNIPER },
{ "IBM Automatic Server Restart - Machine Type 8648", ASMTYPE_SPRUCE },
{ NULL }
};
static int __init ibmasr_init(void)
{
struct ibmasr_id *id;
int rc;
for (id = ibmasr_id_table; id->desc; id++) {
if (dmi_find_device(DMI_DEV_TYPE_OTHER, id->desc, NULL)) {
asr_type = id->type;
break;
}
}
if (!asr_type)
return -ENODEV;
rc = misc_register(&asr_miscdev);
if (rc < 0) {
printk(KERN_ERR PFX "failed to register misc device\n");
return rc;
}
rc = asr_get_base_address();
if (rc) {
misc_deregister(&asr_miscdev);
return rc;
}
return 0;
}
static void __exit ibmasr_exit(void)
{
if (!nowayout)
asr_disable();
misc_deregister(&asr_miscdev);
release_region(asr_base, asr_length);
}
module_init(ibmasr_init);
module_exit(ibmasr_exit);
module_param(nowayout, int, 0);
MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=CONFIG_WATCHDOG_NOWAYOUT)");
MODULE_DESCRIPTION("IBM Automatic Server Restart driver");
MODULE_AUTHOR("Andrey Panin");
MODULE_LICENSE("GPL");
MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
/*
* mv64x60_wdt.c - MV64X60 (Marvell Discovery) watchdog userspace interface
*
* Author: James Chapman <jchapman@katalix.com>
*
* Platform-specific setup code should configure the dog to generate
* interrupt or reset as required. This code only enables/disables
* and services the watchdog.
*
* Derived from mpc8xx_wdt.c, with the following copyright.
*
* 2002 (c) Florian Schirmer <jolt@tuxbox.org> This file is licensed under
* the terms of the GNU General Public License version 2. This program
* is licensed "as is" without any warranty of any kind, whether express
* or implied.
*/
#include <linux/config.h>
#include <linux/fs.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/miscdevice.h>
#include <linux/module.h>
#include <linux/watchdog.h>
#include <asm/mv64x60.h>
#include <asm/uaccess.h>
#include <asm/io.h>
/* MV64x60 WDC (config) register access definitions */
#define MV64x60_WDC_CTL1_MASK (3 << 24)
#define MV64x60_WDC_CTL1(val) ((val & 3) << 24)
#define MV64x60_WDC_CTL2_MASK (3 << 26)
#define MV64x60_WDC_CTL2(val) ((val & 3) << 26)
/* Flags bits */
#define MV64x60_WDOG_FLAG_OPENED 0
#define MV64x60_WDOG_FLAG_ENABLED 1
static unsigned long wdt_flags;
static int wdt_status;
static void __iomem *mv64x60_regs;
static int mv64x60_wdt_timeout;
static void mv64x60_wdt_reg_write(u32 val)
{
/* Allow write only to CTL1 / CTL2 fields, retaining values in
* other fields.
*/
u32 data = readl(mv64x60_regs + MV64x60_WDT_WDC);
data &= ~(MV64x60_WDC_CTL1_MASK | MV64x60_WDC_CTL2_MASK);
data |= val;
writel(data, mv64x60_regs + MV64x60_WDT_WDC);
}
static void mv64x60_wdt_service(void)
{
/* Write 01 followed by 10 to CTL2 */
mv64x60_wdt_reg_write(MV64x60_WDC_CTL2(0x01));
mv64x60_wdt_reg_write(MV64x60_WDC_CTL2(0x02));
}
static void mv64x60_wdt_handler_disable(void)
{
if (test_and_clear_bit(MV64x60_WDOG_FLAG_ENABLED, &wdt_flags)) {
/* Write 01 followed by 10 to CTL1 */
mv64x60_wdt_reg_write(MV64x60_WDC_CTL1(0x01));
mv64x60_wdt_reg_write(MV64x60_WDC_CTL1(0x02));
printk(KERN_NOTICE "mv64x60_wdt: watchdog deactivated\n");
}
}
static void mv64x60_wdt_handler_enable(void)
{
if (!test_and_set_bit(MV64x60_WDOG_FLAG_ENABLED, &wdt_flags)) {
/* Write 01 followed by 10 to CTL1 */
mv64x60_wdt_reg_write(MV64x60_WDC_CTL1(0x01));
mv64x60_wdt_reg_write(MV64x60_WDC_CTL1(0x02));
printk(KERN_NOTICE "mv64x60_wdt: watchdog activated\n");
}
}
static int mv64x60_wdt_open(struct inode *inode, struct file *file)
{
if (test_and_set_bit(MV64x60_WDOG_FLAG_OPENED, &wdt_flags))
return -EBUSY;
mv64x60_wdt_service();
mv64x60_wdt_handler_enable();
return 0;
}
static int mv64x60_wdt_release(struct inode *inode, struct file *file)
{
mv64x60_wdt_service();
#if !defined(CONFIG_WATCHDOG_NOWAYOUT)
mv64x60_wdt_handler_disable();
#endif
clear_bit(MV64x60_WDOG_FLAG_OPENED, &wdt_flags);
return 0;
}
static ssize_t mv64x60_wdt_write(struct file *file, const char *data,
size_t len, loff_t * ppos)
{
if (*ppos != file->f_pos)
return -ESPIPE;
if (len)
mv64x60_wdt_service();
return len;
}
static int mv64x60_wdt_ioctl(struct inode *inode, struct file *file,
unsigned int cmd, unsigned long arg)
{
int timeout;
static struct watchdog_info info = {
.options = WDIOF_KEEPALIVEPING,
.firmware_version = 0,
.identity = "MV64x60 watchdog",
};
switch (cmd) {
case WDIOC_GETSUPPORT:
if (copy_to_user((void *)arg, &info, sizeof(info)))
return -EFAULT;
break;
case WDIOC_GETSTATUS:
case WDIOC_GETBOOTSTATUS:
if (put_user(wdt_status, (int *)arg))
return -EFAULT;
wdt_status &= ~WDIOF_KEEPALIVEPING;
break;
case WDIOC_GETTEMP:
return -EOPNOTSUPP;
case WDIOC_SETOPTIONS:
return -EOPNOTSUPP;
case WDIOC_KEEPALIVE:
mv64x60_wdt_service();
wdt_status |= WDIOF_KEEPALIVEPING;
break;
case WDIOC_SETTIMEOUT:
return -EOPNOTSUPP;
case WDIOC_GETTIMEOUT:
timeout = mv64x60_wdt_timeout * HZ;
if (put_user(timeout, (int *)arg))
return -EFAULT;
break;
default:
return -ENOIOCTLCMD;
}
return 0;
}
static struct file_operations mv64x60_wdt_fops = {
.owner = THIS_MODULE,
.llseek = no_llseek,
.write = mv64x60_wdt_write,
.ioctl = mv64x60_wdt_ioctl,
.open = mv64x60_wdt_open,
.release = mv64x60_wdt_release,
};
static struct miscdevice mv64x60_wdt_miscdev = {
.minor = WATCHDOG_MINOR,
.name = "watchdog",
.fops = &mv64x60_wdt_fops,
};
static int __devinit mv64x60_wdt_probe(struct device *dev)
{
struct platform_device *pd = to_platform_device(dev);
struct mv64x60_wdt_pdata *pdata = pd->dev.platform_data;
int bus_clk = 133;
mv64x60_wdt_timeout = 10;
if (pdata) {
mv64x60_wdt_timeout = pdata->timeout;
bus_clk = pdata->bus_clk;
}
mv64x60_regs = mv64x60_get_bridge_vbase();
writel((mv64x60_wdt_timeout * (bus_clk * 1000000)) >> 8,
mv64x60_regs + MV64x60_WDT_WDC);
return misc_register(&mv64x60_wdt_miscdev);
}
static int __devexit mv64x60_wdt_remove(struct device *dev)
{
misc_deregister(&mv64x60_wdt_miscdev);
mv64x60_wdt_service();
mv64x60_wdt_handler_disable();
return 0;
}
static struct device_driver mv64x60_wdt_driver = {
.name = MV64x60_WDT_NAME,
.bus = &platform_bus_type,
.probe = mv64x60_wdt_probe,
.remove = __devexit_p(mv64x60_wdt_remove),
};
static struct platform_device *mv64x60_wdt_dev;
static int __init mv64x60_wdt_init(void)
{
int ret;
printk(KERN_INFO "MV64x60 watchdog driver\n");
mv64x60_wdt_dev = platform_device_register_simple(MV64x60_WDT_NAME,
-1, NULL, 0);
if (IS_ERR(mv64x60_wdt_dev)) {
ret = PTR_ERR(mv64x60_wdt_dev);
goto out;
}
ret = driver_register(&mv64x60_wdt_driver);
out:
return ret;
}
static void __exit mv64x60_wdt_exit(void)
{
driver_unregister(&mv64x60_wdt_driver);
platform_device_unregister(mv64x60_wdt_dev);
}
module_init(mv64x60_wdt_init);
module_exit(mv64x60_wdt_exit);
MODULE_AUTHOR("James Chapman <jchapman@katalix.com>");
MODULE_DESCRIPTION("MV64x60 watchdog driver");
MODULE_LICENSE("GPL");
MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
......@@ -29,27 +29,29 @@
* Includes, defines, variables, module parameters, ...
*/
#include <linux/config.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/types.h>
#include <linux/delay.h>
#include <linux/miscdevice.h>
#include <linux/watchdog.h>
#include <linux/notifier.h>
#include <linux/reboot.h>
#include <linux/init.h>
#include <linux/fs.h>
#include <linux/pci.h>
#include <linux/ioport.h>
#include <linux/spinlock.h>
#include <asm/uaccess.h>
#include <asm/io.h>
#include <linux/config.h> /* For CONFIG_WATCHDOG_NOWAYOUT/... */
#include <linux/module.h> /* For module specific items */
#include <linux/moduleparam.h> /* For new moduleparam's */
#include <linux/types.h> /* For standard types (like size_t) */
#include <linux/errno.h> /* For the -ENODEV/... values */
#include <linux/kernel.h> /* For printk/panic/... */
#include <linux/delay.h> /* For mdelay function */
#include <linux/miscdevice.h> /* For MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR) */
#include <linux/watchdog.h> /* For the watchdog specific items */
#include <linux/notifier.h> /* For notifier support */
#include <linux/reboot.h> /* For reboot_notifier stuff */
#include <linux/init.h> /* For __init/__exit/... */
#include <linux/fs.h> /* For file operations */
#include <linux/pci.h> /* For pci functions */
#include <linux/ioport.h> /* For io-port access */
#include <linux/spinlock.h> /* For spin_lock/spin_unlock/... */
#include <asm/uaccess.h> /* For copy_to_user/put_user/... */
#include <asm/io.h> /* For inb/outb/... */
/* Module and version information */
#define WATCHDOG_VERSION "1.01"
#define WATCHDOG_DATE "15 Mar 2005"
#define WATCHDOG_DATE "02 Sep 2005"
#define WATCHDOG_DRIVER_NAME "PCI-PC Watchdog"
#define WATCHDOG_NAME "pcwd_pci"
#define PFX WATCHDOG_NAME ": "
......@@ -335,12 +337,14 @@ static int pcipcwd_ioctl(struct inode *inode, struct file *file,
return -EFAULT;
if (new_options & WDIOS_DISABLECARD) {
pcipcwd_stop();
if (pcipcwd_stop())
return -EIO;
retval = 0;
}
if (new_options & WDIOS_ENABLECARD) {
pcipcwd_start();
if (pcipcwd_start())
return -EIO;
retval = 0;
}
......
......@@ -464,7 +464,7 @@ static void s3c2410wdt_shutdown(struct device *dev)
static unsigned long wtcon_save;
static unsigned long wtdat_save;
static int s3c2410wdt_suspend(struct device *dev, u32 state, u32 level)
static int s3c2410wdt_suspend(struct device *dev, pm_message_t state, u32 level)
{
if (level == SUSPEND_POWER_DOWN) {
/* Save watchdog state, and turn it off. */
......
/*
* SBC8360 Watchdog driver
*
* (c) Copyright 2005 Webcon, Inc.
*
* Based on ib700wdt.c, which is based on advantechwdt.c which is based
* on acquirewdt.c which is based on wdt.c.
*
* (c) Copyright 2001 Charles Howes <chowes@vsol.net>
*
* Based on advantechwdt.c which is based on acquirewdt.c which
* is based on wdt.c.
*
* (c) Copyright 2000-2001 Marek Michalkiewicz <marekm@linux.org.pl>
*
* Based on acquirewdt.c which is based on wdt.c.
* Original copyright messages:
*
* (c) Copyright 1996 Alan Cox <alan@redhat.com>, All Rights Reserved.
* http://www.redhat.com
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*
* Neither Alan Cox nor CymruNet Ltd. admit liability nor provide
* warranty for any of this software. This material is provided
* "AS-IS" and at no charge.
*
* (c) Copyright 1995 Alan Cox <alan@redhat.com>
*
* 14-Dec-2001 Matt Domsch <Matt_Domsch@dell.com>
* Added nowayout module option to override CONFIG_WATCHDOG_NOWAYOUT
* Added timeout module option to override default
*
*/
#include <linux/config.h>
#include <linux/module.h>
#include <linux/types.h>
#include <linux/miscdevice.h>
#include <linux/watchdog.h>
#include <linux/ioport.h>
#include <linux/delay.h>
#include <linux/notifier.h>
#include <linux/fs.h>
#include <linux/reboot.h>
#include <linux/init.h>
#include <linux/spinlock.h>
#include <linux/moduleparam.h>
#include <asm/io.h>
#include <asm/uaccess.h>
#include <asm/system.h>
static unsigned long sbc8360_is_open;
static spinlock_t sbc8360_lock;
static char expect_close;
#define PFX "sbc8360: "
/*
*
* Watchdog Timer Configuration
*
* The function of the watchdog timer is to reset the system automatically
* and is defined at I/O port 0120H and 0121H. To enable the watchdog timer
* and allow the system to reset, write appropriate values from the table
* below to I/O port 0120H and 0121H. To disable the timer, write a zero
* value to I/O port 0121H for the system to stop the watchdog function.
*
* The following describes how the timer should be programmed (according to
* the vendor documentation)
*
* Enabling Watchdog:
* MOV AX,000AH (enable, phase I)
* MOV DX,0120H
* OUT DX,AX
* MOV AX,000BH (enable, phase II)
* MOV DX,0120H
* OUT DX,AX
* MOV AX,000nH (set multiplier n, from 1-4)
* MOV DX,0120H
* OUT DX,AX
* MOV AX,000mH (set base timer m, from 0-F)
* MOV DX,0121H
* OUT DX,AX
*
* Reset timer:
* MOV AX,000mH (same as set base timer, above)
* MOV DX,0121H
* OUT DX,AX
*
* Disabling Watchdog:
* MOV AX,0000H (a zero value)
* MOV DX,0120H
* OUT DX,AX
*
* Watchdog timeout configuration values:
* N
* M | 1 2 3 4
* --|----------------------------------
* 0 | 0.5s 5s 50s 100s
* 1 | 1s 10s 100s 200s
* 2 | 1.5s 15s 150s 300s
* 3 | 2s 20s 200s 400s
* 4 | 2.5s 25s 250s 500s
* 5 | 3s 30s 300s 600s
* 6 | 3.5s 35s 350s 700s
* 7 | 4s 40s 400s 800s
* 8 | 4.5s 45s 450s 900s
* 9 | 5s 50s 500s 1000s
* A | 5.5s 55s 550s 1100s
* B | 6s 60s 600s 1200s
* C | 6.5s 65s 650s 1300s
* D | 7s 70s 700s 1400s
* E | 7.5s 75s 750s 1500s
* F | 8s 80s 800s 1600s
*
* Another way to say the same things is:
* For N=1, Timeout = (M+1) * 0.5s
* For N=2, Timeout = (M+1) * 5s
* For N=3, Timeout = (M+1) * 50s
* For N=4, Timeout = (M+1) * 100s
*
*/
static int wd_times[64][2] = {
{0, 1}, /* 0 = 0.5s */
{1, 1}, /* 1 = 1s */
{2, 1}, /* 2 = 1.5s */
{3, 1}, /* 3 = 2s */
{4, 1}, /* 4 = 2.5s */
{5, 1}, /* 5 = 3s */
{6, 1}, /* 6 = 3.5s */
{7, 1}, /* 7 = 4s */
{8, 1}, /* 8 = 4.5s */
{9, 1}, /* 9 = 5s */
{0xA, 1}, /* 10 = 5.5s */
{0xB, 1}, /* 11 = 6s */
{0xC, 1}, /* 12 = 6.5s */
{0xD, 1}, /* 13 = 7s */
{0xE, 1}, /* 14 = 7.5s */
{0xF, 1}, /* 15 = 8s */
{0, 2}, /* 16 = 5s */
{1, 2}, /* 17 = 10s */
{2, 2}, /* 18 = 15s */
{3, 2}, /* 19 = 20s */
{4, 2}, /* 20 = 25s */
{5, 2}, /* 21 = 30s */
{6, 2}, /* 22 = 35s */
{7, 2}, /* 23 = 40s */
{8, 2}, /* 24 = 45s */
{9, 2}, /* 25 = 50s */
{0xA, 2}, /* 26 = 55s */
{0xB, 2}, /* 27 = 60s */
{0xC, 2}, /* 28 = 65s */
{0xD, 2}, /* 29 = 70s */
{0xE, 2}, /* 30 = 75s */
{0xF, 2}, /* 31 = 80s */
{0, 3}, /* 32 = 50s */
{1, 3}, /* 33 = 100s */
{2, 3}, /* 34 = 150s */
{3, 3}, /* 35 = 200s */
{4, 3}, /* 36 = 250s */
{5, 3}, /* 37 = 300s */
{6, 3}, /* 38 = 350s */
{7, 3}, /* 39 = 400s */
{8, 3}, /* 40 = 450s */
{9, 3}, /* 41 = 500s */
{0xA, 3}, /* 42 = 550s */
{0xB, 3}, /* 43 = 600s */
{0xC, 3}, /* 44 = 650s */
{0xD, 3}, /* 45 = 700s */
{0xE, 3}, /* 46 = 750s */
{0xF, 3}, /* 47 = 800s */
{0, 4}, /* 48 = 100s */
{1, 4}, /* 49 = 200s */
{2, 4}, /* 50 = 300s */
{3, 4}, /* 51 = 400s */
{4, 4}, /* 52 = 500s */
{5, 4}, /* 53 = 600s */
{6, 4}, /* 54 = 700s */
{7, 4}, /* 55 = 800s */
{8, 4}, /* 56 = 900s */
{9, 4}, /* 57 = 1000s */
{0xA, 4}, /* 58 = 1100s */
{0xB, 4}, /* 59 = 1200s */
{0xC, 4}, /* 60 = 1300s */
{0xD, 4}, /* 61 = 1400s */
{0xE, 4}, /* 62 = 1500s */
{0xF, 4} /* 63 = 1600s */
};
#define SBC8360_ENABLE 0x120
#define SBC8360_BASETIME 0x121
static int timeout = 27;
static int wd_margin = 0xB;
static int wd_multiplier = 2;
static int nowayout = WATCHDOG_NOWAYOUT;
module_param(timeout, int, 27);
MODULE_PARM_DESC(timeout, "Index into timeout table (0-63) (default=27 (60s))");
module_param(nowayout, int, 0);
MODULE_PARM_DESC(nowayout,
"Watchdog cannot be stopped once started (default=CONFIG_WATCHDOG_NOWAYOUT)");
/*
* Kernel methods.
*/
/* Activate and pre-configure watchdog */
static void sbc8360_activate(void)
{
/* Enable the watchdog */
outb(0x0A, SBC8360_ENABLE);
msleep_interruptible(100);
outb(0x0B, SBC8360_ENABLE);
msleep_interruptible(100);
/* Set timeout multiplier */
outb(wd_multiplier, SBC8360_ENABLE);
msleep_interruptible(100);
/* Nothing happens until first sbc8360_ping() */
}
/* Kernel pings watchdog */
static void sbc8360_ping(void)
{
/* Write the base timer register */
outb(wd_margin, SBC8360_BASETIME);
}
/* Userspace pings kernel driver, or requests clean close */
static ssize_t sbc8360_write(struct file *file, const char __user * buf,
size_t count, loff_t * ppos)
{
if (count) {
if (!nowayout) {
size_t i;
/* In case it was set long ago */
expect_close = 0;
for (i = 0; i != count; i++) {
char c;
if (get_user(c, buf + i))
return -EFAULT;
if (c == 'V')
expect_close = 42;
}
}
sbc8360_ping();
}
return count;
}
static int sbc8360_open(struct inode *inode, struct file *file)
{
spin_lock(&sbc8360_lock);
if (test_and_set_bit(0, &sbc8360_is_open)) {
spin_unlock(&sbc8360_lock);
return -EBUSY;
}
if (nowayout)
__module_get(THIS_MODULE);
/* Activate and ping once to start the countdown */
spin_unlock(&sbc8360_lock);
sbc8360_activate();
sbc8360_ping();
return nonseekable_open(inode, file);
}
static int sbc8360_close(struct inode *inode, struct file *file)
{
spin_lock(&sbc8360_lock);
if (expect_close == 42)
outb(0, SBC8360_ENABLE);
else
printk(KERN_CRIT PFX
"SBC8360 device closed unexpectedly. SBC8360 will not stop!\n");
clear_bit(0, &sbc8360_is_open);
expect_close = 0;
spin_unlock(&sbc8360_lock);
return 0;
}
/*
* Notifier for system down
*/
static int sbc8360_notify_sys(struct notifier_block *this, unsigned long code,
void *unused)
{
if (code == SYS_DOWN || code == SYS_HALT) {
/* Disable the SBC8360 Watchdog */
outb(0, SBC8360_ENABLE);
}
return NOTIFY_DONE;
}
/*
* Kernel Interfaces
*/
static struct file_operations sbc8360_fops = {
.owner = THIS_MODULE,
.llseek = no_llseek,
.write = sbc8360_write,
.open = sbc8360_open,
.release = sbc8360_close,
};
static struct miscdevice sbc8360_miscdev = {
.minor = WATCHDOG_MINOR,
.name = "watchdog",
.fops = &sbc8360_fops,
};
/*
* The SBC8360 needs to learn about soft shutdowns in order to
* turn the timebomb registers off.
*/
static struct notifier_block sbc8360_notifier = {
.notifier_call = sbc8360_notify_sys,
};
static int __init sbc8360_init(void)
{
int res;
unsigned long int mseconds = 60000;
spin_lock_init(&sbc8360_lock);
res = misc_register(&sbc8360_miscdev);
if (res) {
printk(KERN_ERR PFX "failed to register misc device\n");
goto out_nomisc;
}
if (!request_region(SBC8360_ENABLE, 1, "SBC8360")) {
printk(KERN_ERR PFX "ENABLE method I/O %X is not available.\n",
SBC8360_ENABLE);
res = -EIO;
goto out_noenablereg;
}
if (!request_region(SBC8360_BASETIME, 1, "SBC8360")) {
printk(KERN_ERR PFX
"BASETIME method I/O %X is not available.\n",
SBC8360_BASETIME);
res = -EIO;
goto out_nobasetimereg;
}
res = register_reboot_notifier(&sbc8360_notifier);
if (res) {
printk(KERN_ERR PFX "Failed to register reboot notifier.\n");
goto out_noreboot;
}
if (timeout < 0 || timeout > 63) {
printk(KERN_ERR PFX "Invalid timeout index (must be 0-63).\n");
res = -EINVAL;
goto out_noreboot;
}
wd_margin = wd_times[timeout][0];
wd_multiplier = wd_times[timeout][1];
if (wd_multiplier == 1)
mseconds = (wd_margin + 1) * 500;
else if (wd_multiplier == 2)
mseconds = (wd_margin + 1) * 5000;
else if (wd_multiplier == 3)
mseconds = (wd_margin + 1) * 50000;
else if (wd_multiplier == 4)
mseconds = (wd_margin + 1) * 100000;
/* My kingdom for the ability to print "0.5 seconds" in the kernel! */
printk(KERN_INFO PFX "Timeout set at %ld ms.\n", mseconds);
return 0;
out_noreboot:
release_region(SBC8360_ENABLE, 1);
release_region(SBC8360_BASETIME, 1);
out_noenablereg:
out_nobasetimereg:
misc_deregister(&sbc8360_miscdev);
out_nomisc:
return res;
}
static void __exit sbc8360_exit(void)
{
misc_deregister(&sbc8360_miscdev);
unregister_reboot_notifier(&sbc8360_notifier);
release_region(SBC8360_ENABLE, 1);
release_region(SBC8360_BASETIME, 1);
}
module_init(sbc8360_init);
module_exit(sbc8360_exit);
MODULE_AUTHOR("Ian E. Morgan <imorgan@webcon.ca>");
MODULE_DESCRIPTION("SBC8360 watchdog driver");
MODULE_LICENSE("GPL");
MODULE_VERSION("1.0");
MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
/* end of sbc8360.c */
/*
* W83977F Watchdog Timer Driver for Winbond W83977F I/O Chip
*
* (c) Copyright 2005 Jose Goncalves <jose.goncalves@inov.pt>
*
* Based on w83877f_wdt.c by Scott Jennings,
* and wdt977.c by Woody Suwalski
*
* -----------------------
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*
*/
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/config.h>
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/fs.h>
#include <linux/miscdevice.h>
#include <linux/init.h>
#include <linux/ioport.h>
#include <linux/watchdog.h>
#include <linux/notifier.h>
#include <linux/reboot.h>
#include <asm/io.h>
#include <asm/system.h>
#include <asm/uaccess.h>
#define WATCHDOG_VERSION "1.00"
#define WATCHDOG_NAME "W83977F WDT"
#define PFX WATCHDOG_NAME ": "
#define DRIVER_VERSION WATCHDOG_NAME " driver, v" WATCHDOG_VERSION "\n"
#define IO_INDEX_PORT 0x3F0
#define IO_DATA_PORT (IO_INDEX_PORT+1)
#define UNLOCK_DATA 0x87
#define LOCK_DATA 0xAA
#define DEVICE_REGISTER 0x07
#define DEFAULT_TIMEOUT 45 /* default timeout in seconds */
static int timeout = DEFAULT_TIMEOUT;
static int timeoutW; /* timeout in watchdog counter units */
static unsigned long timer_alive;
static int testmode;
static char expect_close;
static spinlock_t spinlock;
module_param(timeout, int, 0);
MODULE_PARM_DESC(timeout,"Watchdog timeout in seconds (15..7635), default=" __MODULE_STRING(DEFAULT_TIMEOUT) ")");
module_param(testmode, int, 0);
MODULE_PARM_DESC(testmode,"Watchdog testmode (1 = no reboot), default=0");
static int nowayout = WATCHDOG_NOWAYOUT;
module_param(nowayout, int, 0);
MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=CONFIG_WATCHDOG_NOWAYOUT)");
/*
* Start the watchdog
*/
static int wdt_start(void)
{
unsigned long flags;
spin_lock_irqsave(&spinlock, flags);
/* Unlock the SuperIO chip */
outb_p(UNLOCK_DATA,IO_INDEX_PORT);
outb_p(UNLOCK_DATA,IO_INDEX_PORT);
/*
* Select device Aux2 (device=8) to set watchdog regs F2, F3 and F4.
* F2 has the timeout in watchdog counter units.
* F3 is set to enable watchdog LED blink at timeout.
* F4 is used to just clear the TIMEOUT'ed state (bit 0).
*/
outb_p(DEVICE_REGISTER,IO_INDEX_PORT);
outb_p(0x08,IO_DATA_PORT);
outb_p(0xF2,IO_INDEX_PORT);
outb_p(timeoutW,IO_DATA_PORT);
outb_p(0xF3,IO_INDEX_PORT);
outb_p(0x08,IO_DATA_PORT);
outb_p(0xF4,IO_INDEX_PORT);
outb_p(0x00,IO_DATA_PORT);
/* Set device Aux2 active */
outb_p(0x30,IO_INDEX_PORT);
outb_p(0x01,IO_DATA_PORT);
/*
* Select device Aux1 (dev=7) to set GP16 as the watchdog output
* (in reg E6) and GP13 as the watchdog LED output (in reg E3).
* Map GP16 at pin 119.
* In test mode watch the bit 0 on F4 to indicate "triggered" or
* check watchdog LED on SBC.
*/
outb_p(DEVICE_REGISTER,IO_INDEX_PORT);
outb_p(0x07,IO_DATA_PORT);
if (!testmode)
{
unsigned pin_map;
outb_p(0xE6,IO_INDEX_PORT);
outb_p(0x0A,IO_DATA_PORT);
outb_p(0x2C,IO_INDEX_PORT);
pin_map = inb_p(IO_DATA_PORT);
pin_map |= 0x10;
pin_map &= ~(0x20);
outb_p(0x2C,IO_INDEX_PORT);
outb_p(pin_map,IO_DATA_PORT);
}
outb_p(0xE3,IO_INDEX_PORT);
outb_p(0x08,IO_DATA_PORT);
/* Set device Aux1 active */
outb_p(0x30,IO_INDEX_PORT);
outb_p(0x01,IO_DATA_PORT);
/* Lock the SuperIO chip */
outb_p(LOCK_DATA,IO_INDEX_PORT);
spin_unlock_irqrestore(&spinlock, flags);
printk(KERN_INFO PFX "activated.\n");
return 0;
}
/*
* Stop the watchdog
*/
static int wdt_stop(void)
{
unsigned long flags;
spin_lock_irqsave(&spinlock, flags);
/* Unlock the SuperIO chip */
outb_p(UNLOCK_DATA,IO_INDEX_PORT);
outb_p(UNLOCK_DATA,IO_INDEX_PORT);
/*
* Select device Aux2 (device=8) to set watchdog regs F2, F3 and F4.
* F2 is reset to its default value (watchdog timer disabled).
* F3 is reset to its default state.
* F4 clears the TIMEOUT'ed state (bit 0) - back to default.
*/
outb_p(DEVICE_REGISTER,IO_INDEX_PORT);
outb_p(0x08,IO_DATA_PORT);
outb_p(0xF2,IO_INDEX_PORT);
outb_p(0xFF,IO_DATA_PORT);
outb_p(0xF3,IO_INDEX_PORT);
outb_p(0x00,IO_DATA_PORT);
outb_p(0xF4,IO_INDEX_PORT);
outb_p(0x00,IO_DATA_PORT);
outb_p(0xF2,IO_INDEX_PORT);
outb_p(0x00,IO_DATA_PORT);
/*
* Select device Aux1 (dev=7) to set GP16 (in reg E6) and
* Gp13 (in reg E3) as inputs.
*/
outb_p(DEVICE_REGISTER,IO_INDEX_PORT);
outb_p(0x07,IO_DATA_PORT);
if (!testmode)
{
outb_p(0xE6,IO_INDEX_PORT);
outb_p(0x01,IO_DATA_PORT);
}
outb_p(0xE3,IO_INDEX_PORT);
outb_p(0x01,IO_DATA_PORT);
/* Lock the SuperIO chip */
outb_p(LOCK_DATA,IO_INDEX_PORT);
spin_unlock_irqrestore(&spinlock, flags);
printk(KERN_INFO PFX "shutdown.\n");
return 0;
}
/*
* Send a keepalive ping to the watchdog
* This is done by simply re-writing the timeout to reg. 0xF2
*/
static int wdt_keepalive(void)
{
unsigned long flags;
spin_lock_irqsave(&spinlock, flags);
/* Unlock the SuperIO chip */
outb_p(UNLOCK_DATA,IO_INDEX_PORT);
outb_p(UNLOCK_DATA,IO_INDEX_PORT);
/* Select device Aux2 (device=8) to kick watchdog reg F2 */
outb_p(DEVICE_REGISTER,IO_INDEX_PORT);
outb_p(0x08,IO_DATA_PORT);
outb_p(0xF2,IO_INDEX_PORT);
outb_p(timeoutW,IO_DATA_PORT);
/* Lock the SuperIO chip */
outb_p(LOCK_DATA,IO_INDEX_PORT);
spin_unlock_irqrestore(&spinlock, flags);
return 0;
}
/*
* Set the watchdog timeout value
*/
static int wdt_set_timeout(int t)
{
int tmrval;
/*
* Convert seconds to watchdog counter time units, rounding up.
* On PCM-5335 watchdog units are 30 seconds/step with 15 sec startup
* value. This information is supplied in the PCM-5335 manual and was
* checked by me on a real board. This is a bit strange because W83977f
* datasheet says counter unit is in minutes!
*/
if (t < 15)
return -EINVAL;
tmrval = ((t + 15) + 29) / 30;
if (tmrval > 255)
return -EINVAL;
/*
* timeout is the timeout in seconds,
* timeoutW is the timeout in watchdog counter units.
*/
timeoutW = tmrval;
timeout = (timeoutW * 30) - 15;
return 0;
}
/*
* Get the watchdog status
*/
static int wdt_get_status(int *status)
{
int new_status;
unsigned long flags;
spin_lock_irqsave(&spinlock, flags);
/* Unlock the SuperIO chip */
outb_p(UNLOCK_DATA,IO_INDEX_PORT);
outb_p(UNLOCK_DATA,IO_INDEX_PORT);
/* Select device Aux2 (device=8) to read watchdog reg F4 */
outb_p(DEVICE_REGISTER,IO_INDEX_PORT);
outb_p(0x08,IO_DATA_PORT);
outb_p(0xF4,IO_INDEX_PORT);
new_status = inb_p(IO_DATA_PORT);
/* Lock the SuperIO chip */
outb_p(LOCK_DATA,IO_INDEX_PORT);
spin_unlock_irqrestore(&spinlock, flags);
*status = 0;
if (new_status & 1)
*status |= WDIOF_CARDRESET;
return 0;
}
/*
* /dev/watchdog handling
*/
static int wdt_open(struct inode *inode, struct file *file)
{
/* If the watchdog is alive we don't need to start it again */
if( test_and_set_bit(0, &timer_alive) )
return -EBUSY;
if (nowayout)
__module_get(THIS_MODULE);
wdt_start();
return nonseekable_open(inode, file);
}
static int wdt_release(struct inode *inode, struct file *file)
{
/*
* Shut off the timer.
* Lock it in if it's a module and we set nowayout
*/
if (expect_close == 42)
{
wdt_stop();
clear_bit(0, &timer_alive);
} else {
wdt_keepalive();
printk(KERN_CRIT PFX "unexpected close, not stopping watchdog!\n");
}
expect_close = 0;
return 0;
}
/*
* wdt_write:
* @file: file handle to the watchdog
* @buf: buffer to write (unused as data does not matter here
* @count: count of bytes
* @ppos: pointer to the position to write. No seeks allowed
*
* A write to a watchdog device is defined as a keepalive signal. Any
* write of data will do, as we we don't define content meaning.
*/
static ssize_t wdt_write(struct file *file, const char __user *buf,
size_t count, loff_t *ppos)
{
/* See if we got the magic character 'V' and reload the timer */
if(count)
{
if (!nowayout)
{
size_t ofs;
/* note: just in case someone wrote the magic character long ago */
expect_close = 0;
/* scan to see whether or not we got the magic character */
for(ofs = 0; ofs != count; ofs++)
{
char c;
if (get_user(c, buf + ofs))
return -EFAULT;
if (c == 'V') {
expect_close = 42;
}
}
}
/* someone wrote to us, we should restart timer */
wdt_keepalive();
}
return count;
}
/*
* wdt_ioctl:
* @inode: inode of the device
* @file: file handle to the device
* @cmd: watchdog command
* @arg: argument pointer
*
* The watchdog API defines a common set of functions for all watchdogs
* according to their available features.
*/
static struct watchdog_info ident = {
.options = WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE | WDIOF_KEEPALIVEPING,
.firmware_version = 1,
.identity = WATCHDOG_NAME,
};
static int wdt_ioctl(struct inode *inode, struct file *file,
unsigned int cmd, unsigned long arg)
{
int status;
int new_options, retval = -EINVAL;
int new_timeout;
union {
struct watchdog_info __user *ident;
int __user *i;
} uarg;
uarg.i = (int __user *)arg;
switch(cmd)
{
default:
return -ENOIOCTLCMD;
case WDIOC_GETSUPPORT:
return copy_to_user(uarg.ident, &ident, sizeof(ident)) ? -EFAULT : 0;
case WDIOC_GETSTATUS:
wdt_get_status(&status);
return put_user(status, uarg.i);
case WDIOC_GETBOOTSTATUS:
return put_user(0, uarg.i);
case WDIOC_KEEPALIVE:
wdt_keepalive();
return 0;
case WDIOC_SETOPTIONS:
if (get_user (new_options, uarg.i))
return -EFAULT;
if (new_options & WDIOS_DISABLECARD) {
wdt_stop();
retval = 0;
}
if (new_options & WDIOS_ENABLECARD) {
wdt_start();
retval = 0;
}
return retval;
case WDIOC_SETTIMEOUT:
if (get_user(new_timeout, uarg.i))
return -EFAULT;
if (wdt_set_timeout(new_timeout))
return -EINVAL;
wdt_keepalive();
/* Fall */
case WDIOC_GETTIMEOUT:
return put_user(timeout, uarg.i);
}
}
static int wdt_notify_sys(struct notifier_block *this, unsigned long code,
void *unused)
{
if (code==SYS_DOWN || code==SYS_HALT)
wdt_stop();
return NOTIFY_DONE;
}
static struct file_operations wdt_fops=
{
.owner = THIS_MODULE,
.llseek = no_llseek,
.write = wdt_write,
.ioctl = wdt_ioctl,
.open = wdt_open,
.release = wdt_release,
};
static struct miscdevice wdt_miscdev=
{
.minor = WATCHDOG_MINOR,
.name = "watchdog",
.fops = &wdt_fops,
};
static struct notifier_block wdt_notifier = {
.notifier_call = wdt_notify_sys,
};
static int __init w83977f_wdt_init(void)
{
int rc;
printk(KERN_INFO PFX DRIVER_VERSION);
spin_lock_init(&spinlock);
/*
* Check that the timeout value is within it's range ;
* if not reset to the default
*/
if (wdt_set_timeout(timeout)) {
wdt_set_timeout(DEFAULT_TIMEOUT);
printk(KERN_INFO PFX "timeout value must be 15<=timeout<=7635, using %d\n",
DEFAULT_TIMEOUT);
}
if (!request_region(IO_INDEX_PORT, 2, WATCHDOG_NAME))
{
printk(KERN_ERR PFX "I/O address 0x%04x already in use\n",
IO_INDEX_PORT);
rc = -EIO;
goto err_out;
}
rc = misc_register(&wdt_miscdev);
if (rc)
{
printk(KERN_ERR PFX "cannot register miscdev on minor=%d (err=%d)\n",
wdt_miscdev.minor, rc);
goto err_out_region;
}
rc = register_reboot_notifier(&wdt_notifier);
if (rc)
{
printk(KERN_ERR PFX "cannot register reboot notifier (err=%d)\n",
rc);
goto err_out_miscdev;
}
printk(KERN_INFO PFX "initialized. timeout=%d sec (nowayout=%d testmode=%d)\n",
timeout, nowayout, testmode);
return 0;
err_out_miscdev:
misc_deregister(&wdt_miscdev);
err_out_region:
release_region(IO_INDEX_PORT,2);
err_out:
return rc;
}
static void __exit w83977f_wdt_exit(void)
{
wdt_stop();
misc_deregister(&wdt_miscdev);
unregister_reboot_notifier(&wdt_notifier);
release_region(IO_INDEX_PORT,2);
}
module_init(w83977f_wdt_init);
module_exit(w83977f_wdt_exit);
MODULE_AUTHOR("Jose Goncalves <jose.goncalves@inov.pt>");
MODULE_DESCRIPTION("Driver for watchdog timer in W83977F I/O chip");
MODULE_LICENSE("GPL");
MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
......@@ -119,6 +119,14 @@ extern spinlock_t mv64x60_lock;
#define MV64x60_64BIT_WIN_COUNT 24
/* Watchdog Platform Device, Driver Data */
#define MV64x60_WDT_NAME "wdt"
struct mv64x60_wdt_pdata {
int timeout; /* watchdog expiry in seconds, default 10 */
int bus_clk; /* bus clock in MHz, default 133 */
};
/*
* Define a structure that's used to pass in config information to the
* core routines.
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment