Commit a900cac3 authored by Hermann Lauer's avatar Hermann Lauer Committed by Maxime Ripard

ARM: dts: sun7i: a20: bananapro: Fix ethernet phy-mode

BPi Pro needs TX and RX delay for Gbit to work reliable and avoid high
packet loss rates. The realtek phy driver overrides the settings of the
pull ups for the delays, so fix this for BananaPro.

Fix the phy-mode description to correctly reflect this so that the
implementation doesn't reconfigure the delays incorrectly. This
happened with commit bbc4d71d ("net: phy: realtek: fix rtl8211e
rx/tx delay config").

Fixes: 10662a33 ("ARM: dts: sun7i: Add dts file for Bananapro board")
Signed-off-by: default avatarHermann Lauer <Hermann.Lauer@uni-heidelberg.de>
Signed-off-by: default avatarMaxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20210128111842.GA11919@lemon.iwr.uni-heidelberg.de
parent 530fe6bf
......@@ -110,7 +110,7 @@ &gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_rgmii_pins>;
phy-handle = <&phy1>;
phy-mode = "rgmii";
phy-mode = "rgmii-id";
phy-supply = <&reg_gmac_3v3>;
status = "okay";
};
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment