ARM: Kirkwood: Convert IX2-200 to pinctrl.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>

arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts

 /dts-v1/;
 
 /include/ "kirkwood.dtsi"
+/include/ "kirkwood-6281.dtsi"
 
 / {
 	model = "Iomega StorCenter ix2-200";
@@ -16,6 +17,94 @@ chosen {
 	};
 
 	ocp@f1000000 {
+		pinctrl: pinctrl@10000 {
+
+			pinctrl-0 = < &pmx_button_reset &pmx_button_power
+				      &pmx_led_backup &pmx_led_power
+				      &pmx_button_otb &pmx_led_rebuild
+				      &pmx_led_health
+				      &pmx_led_sata_brt_ctrl_1
+				      &pmx_led_sata_brt_ctrl_2
+				      &pmx_led_backup_brt_ctrl_1
+				      &pmx_led_backup_brt_ctrl_2
+				      &pmx_led_power_brt_ctrl_1
+				      &pmx_led_power_brt_ctrl_2
+				      &pmx_led_health_brt_ctrl_1
+				      &pmx_led_health_brt_ctrl_2
+				      &pmx_led_rebuild_brt_ctrl_1
+				      &pmx_led_rebuild_brt_ctrl_2 >;
+			pinctrl-names = "default";
+
+			pmx_button_reset: pmx-button-reset {
+				marvell,pins = "mpp12";
+				marvell,function = "gpio";
+			};
+			pmx_button_power: pmx-button-power {
+				marvell,pins = "mpp14";
+				marvell,function = "gpio";
+			};
+			pmx_led_backup: pmx-led-backup {
+				marvell,pins = "mpp15";
+				marvell,function = "gpio";
+			};
+			pmx_led_power: pmx-led-power {
+				marvell,pins = "mpp16";
+				marvell,function = "gpio";
+			};
+			pmx_button_otb: pmx-button-otb {
+				marvell,pins = "mpp35";
+				marvell,function = "gpio";
+			};
+			pmx_led_rebuild: pmx-led-rebuild {
+				marvell,pins = "mpp36";
+				marvell,function = "gpio";
+			};
+			pmx_led_health: pmx-led_health {
+				marvell,pins = "mpp37";
+				marvell,function = "gpio";
+			};
+			pmx_led_sata_brt_ctrl_1: pmx-led-sata-brt-ctrl-1 {
+				marvell,pins = "mpp38";
+				marvell,function = "gpio";
+			};
+			pmx_led_sata_brt_ctrl_2: pmx-led-sata-brt-ctrl-2 {
+				marvell,pins = "mpp39";
+				marvell,function = "gpio";
+			};
+			pmx_led_backup_brt_ctrl_1: pmx-led-backup-brt-ctrl-1 {
+				marvell,pins = "mpp40";
+				marvell,function = "gpio";
+			};
+			pmx_led_backup_brt_ctrl_2: pmx-led-backup-brt-ctrl-2 {
+				marvell,pins = "mpp41";
+				marvell,function = "gpio";
+			};
+			pmx_led_power_brt_ctrl_1: pmx-led-power-brt-ctrl-1 {
+				marvell,pins = "mpp42";
+				marvell,function = "gpio";
+			};
+			pmx_led_power_brt_ctrl_2: pmx-led-power-brt-ctrl-2 {
+				marvell,pins = "mpp43";
+				marvell,function = "gpio";
+			};
+			pmx_led_health_brt_ctrl_1: pmx-led-health-brt-ctrl-1 {
+				marvell,pins = "mpp44";
+				marvell,function = "gpio";
+			};
+			pmx_led_health_brt_ctrl_2: pmx-led-health-brt-ctrl-2 {
+				marvell,pins = "mpp45";
+				marvell,function = "gpio";
+			};
+			pmx_led_rebuild_brt_ctrl_1: pmx-led-rebuild-brt-ctrl-1 {
+				marvell,pins = "mpp44";
+				marvell,function = "gpio";
+			};
+			pmx_led_rebuild_brt_ctrl_2: pmx-led-rebuild-brt-ctrl-2 {
+				marvell,pins = "mpp45";
+				marvell,function = "gpio";
+			};
+
+		};
 		i2c@11000 {
 			status = "okay";
 

arch/arm/mach-kirkwood/board-iomega_ix2_200.c

@@ -15,7 +15,6 @@
 #include <linux/ethtool.h>
 #include <mach/kirkwood.h>
 #include "common.h"
-#include "mpp.h"
 
 static struct mv643xx_eth_platform_data iomega_ix2_200_ge00_data = {
 	.phy_addr       = MV643XX_ETH_PHY_NONE,
@@ -23,33 +22,10 @@ static struct mv643xx_eth_platform_data iomega_ix2_200_ge00_data = {
 	.duplex         = DUPLEX_FULL,
 };
 
-static unsigned int iomega_ix2_200_mpp_config[] __initdata = {
-	MPP12_GPIO,			/* Reset Button */
-	MPP14_GPIO,			/* Power Button */
-	MPP15_GPIO,			/* Backup LED (blue) */
-	MPP16_GPIO,			/* Power LED (white) */
-	MPP35_GPIO,			/* OTB Button */
-	MPP36_GPIO,			/* Rebuild LED (white) */
-	MPP37_GPIO,			/* Health LED (red) */
-	MPP38_GPIO,			/* SATA LED brightness control 1 */
-	MPP39_GPIO,			/* SATA LED brightness control 2 */
-	MPP40_GPIO,			/* Backup LED brightness control 1 */
-	MPP41_GPIO,			/* Backup LED brightness control 2 */
-	MPP42_GPIO,			/* Power LED brightness control 1 */
-	MPP43_GPIO,			/* Power LED brightness control 2 */
-	MPP44_GPIO,			/* Health LED brightness control 1 */
-	MPP45_GPIO,			/* Health LED brightness control 2 */
-	MPP46_GPIO,			/* Rebuild LED brightness control 1 */
-	MPP47_GPIO,			/* Rebuild LED brightness control 2 */
-	0
-};
-
 void __init iomega_ix2_200_init(void)
 {
 	/*
 	 * Basic setup. Needs to be called early.
 	 */
-	kirkwood_mpp_conf(iomega_ix2_200_mpp_config);
-
 	kirkwood_ge01_init(&iomega_ix2_200_ge00_data);
 }