Commit a9d608c1 authored by Florian Fainelli's avatar Florian Fainelli Committed by David S. Miller

net: bcmgenet: implement GPHY power down sequence

Implement the GPHY power down sequence by setting all power down bits, putting
the GPHY in reset, and finally cutting the 25Mhz reference clock.
Signed-off-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 0c81a8ee
......@@ -177,8 +177,8 @@ static void bcmgenet_phy_power_set(struct net_device *dev, bool enable)
if (!GENET_IS_V4(priv))
return;
if (enable) {
reg = bcmgenet_ext_readl(priv, EXT_GPHY_CTRL);
if (enable) {
reg &= ~EXT_CK25_DIS;
bcmgenet_ext_writel(priv, reg, EXT_GPHY_CTRL);
mdelay(1);
......@@ -189,9 +189,14 @@ static void bcmgenet_phy_power_set(struct net_device *dev, bool enable)
mdelay(1);
reg &= ~EXT_GPHY_RESET;
} else {
reg |= EXT_CFG_IDDQ_BIAS | EXT_CFG_PWR_DOWN | EXT_GPHY_RESET;
bcmgenet_ext_writel(priv, reg, EXT_GPHY_CTRL);
udelay(60);
mdelay(1);
reg |= EXT_CK25_DIS;
}
bcmgenet_ext_writel(priv, reg, EXT_GPHY_CTRL);
udelay(60);
}
static void bcmgenet_internal_phy_setup(struct net_device *dev)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment