Commit aab9e789 authored by Hans de Goede's avatar Hans de Goede Committed by Andy Shevchenko

platform/x86: asus-nb-wmi: Revert "Do not load on Asus T100TA and T200TA"

The WMI INIT method on for some reason turns on the camera LED on these
2-in-1s, without the WMI interface allowing further control over the LED.

To fix this commit b5f7311d ("platform/x86: asus-nb-wmi: Do not load
on Asus T100TA and T200TA") added a blacklist with these 2 models on it
since the WMI driver did not add any extra functionality to these models.

Recently I've been working on making more 2-in-1 models report their
tablet-mode (SW_TABLET_MODE) to userspace; and I've found that these 2
Asus models report this through WMI. This commit reverts the adding
of the blacklist, so that the Asus WMI driver can be used on these
models to report their tablet-mode.

Note, not calling INIT is also not an option, because then we will not
receive events when the tablet-mode changes. So the LED issue will need
to be fixed somewhere else entirely.
Signed-off-by: default avatarHans de Goede <hdegoede@redhat.com>
Signed-off-by: default avatarAndy Shevchenko <andriy.shevchenko@linux.intel.com>
parent 476d60b1
...@@ -515,33 +515,9 @@ static struct asus_wmi_driver asus_nb_wmi_driver = { ...@@ -515,33 +515,9 @@ static struct asus_wmi_driver asus_nb_wmi_driver = {
.detect_quirks = asus_nb_wmi_quirks, .detect_quirks = asus_nb_wmi_quirks,
}; };
static const struct dmi_system_id asus_nb_wmi_blacklist[] __initconst = {
{
/*
* asus-nb-wm adds no functionality. The T100TA has a detachable
* USB kbd, so no hotkeys and it has no WMI rfkill; and loading
* asus-nb-wm causes the camera LED to turn and _stay_ on.
*/
.matches = {
DMI_EXACT_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "T100TA"),
},
},
{
/* The Asus T200TA has the same issue as the T100TA */
.matches = {
DMI_EXACT_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "T200TA"),
},
},
{} /* Terminating entry */
};
static int __init asus_nb_wmi_init(void) static int __init asus_nb_wmi_init(void)
{ {
if (dmi_check_system(asus_nb_wmi_blacklist))
return -ENODEV;
return asus_wmi_register_driver(&asus_nb_wmi_driver); return asus_wmi_register_driver(&asus_nb_wmi_driver);
} }
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment