Commit aadc0cd5 authored by Stephen Kitt's avatar Stephen Kitt Committed by Jonathan Corbet

docs: sysctl/fs: re-order, prettify

This brings the text markup in line with sysctl/abi and
sysctl/kernel:

* the entries are ordered alphabetically
* the table of contents is automatically generated
* markup is used as appropriate for constants etc.

The content isn't fully up-to-date but the obsolete entries are gone,
so remove the kernel version mention.
Signed-off-by: default avatarStephen Kitt <steve@sk2.org>
Link: https://lore.kernel.org/r/20220930102937.135841-6-steve@sk2.orgSigned-off-by: default avatarJonathan Corbet <corbet@lwn.net>
parent 4ce46317
......@@ -2,8 +2,6 @@
Documentation for /proc/sys/fs/
===============================
kernel version 2.2.10
Copyright (c) 1998, 1999, Rik van Riel <riel@nl.linux.org>
Copyright (c) 2009, Shen Feng<shen@cn.fujitsu.com>
......@@ -12,55 +10,40 @@ For general info and legal blurb, please look in intro.rst.
------------------------------------------------------------------------------
This file contains documentation for the sysctl files in
/proc/sys/fs/ and is valid for Linux kernel version 2.2.
This file contains documentation for the sysctl files and directories
in ``/proc/sys/fs/``.
The files in this directory can be used to tune and monitor
miscellaneous and general things in the operation of the Linux
kernel. Since some of the files _can_ be used to screw up your
kernel. Since some of the files *can* be used to screw up your
system, it is advisable to read both documentation and source
before actually making adjustments.
1. /proc/sys/fs
===============
Currently, these files are in /proc/sys/fs:
- aio-max-nr
- aio-nr
- dentry-state
- file-max
- file-nr
- inode-nr
- inode-state
- nr_open
- overflowuid
- overflowgid
- pipe-user-pages-hard
- pipe-user-pages-soft
- protected_fifos
- protected_hardlinks
- protected_regular
- protected_symlinks
- suid_dumpable
- super-max
- super-nr
Currently, these files might (depending on your configuration)
show up in ``/proc/sys/fs``:
.. contents:: :local:
aio-nr & aio-max-nr
-------------------
aio-nr shows the current system-wide number of asynchronous io
requests. aio-max-nr allows you to change the maximum value
aio-nr can grow to. If aio-nr reaches aio-nr-max then io_setup will
fail with EAGAIN. Note that raising aio-max-nr does not result in the
``aio-nr`` shows the current system-wide number of asynchronous io
requests. ``aio-max-nr`` allows you to change the maximum value
``aio-nr`` can grow to. If ``aio-nr`` reaches ``aio-nr-max`` then
``io_setup`` will fail with ``EAGAIN``. Note that raising
``aio-max-nr`` does not result in the
pre-allocation or re-sizing of any kernel data structures.
dentry-state
------------
From linux/include/linux/dcache.h::
This file shows the values in ``struct dentry_stat``, as defined in
``linux/include/linux/dcache.h``::
struct dentry_stat_t dentry_stat {
int nr_dentry;
......@@ -73,16 +56,16 @@ From linux/include/linux/dcache.h::
Dentries are dynamically allocated and deallocated.
nr_dentry shows the total number of dentries allocated (active
+ unused). nr_unused shows the number of dentries that are not
``nr_dentry`` shows the total number of dentries allocated (active
+ unused). ``nr_unused shows`` the number of dentries that are not
actively used, but are saved in the LRU list for future reuse.
Age_limit is the age in seconds after which dcache entries
can be reclaimed when memory is short and want_pages is
nonzero when shrink_dcache_pages() has been called and the
``age_limit`` is the age in seconds after which dcache entries
can be reclaimed when memory is short and ``want_pages`` is
nonzero when ``shrink_dcache_pages()`` has been called and the
dcache isn't pruned yet.
nr_negative shows the number of unused dentries that are also
``nr_negative`` shows the number of unused dentries that are also
negative dentries which do not map to any files. Instead,
they help speeding up rejection of non-existing files provided
by the users.
......@@ -91,32 +74,26 @@ by the users.
file-max & file-nr
------------------
The value in file-max denotes the maximum number of file-
The value in ``file-max`` denotes the maximum number of file-
handles that the Linux kernel will allocate. When you get lots
of error messages about running out of file handles, you might
want to increase this limit.
Historically,the kernel was able to allocate file handles
dynamically, but not to free them again. The three values in
file-nr denote the number of allocated file handles, the number
``file-nr`` denote the number of allocated file handles, the number
of allocated but unused file handles, and the maximum number of
file handles. Linux 2.6 always reports 0 as the number of free
file handles. Linux 2.6 and later always reports 0 as the number of free
file handles -- this is not an error, it just means that the
number of allocated file handles exactly matches the number of
used file handles.
Attempts to allocate more file descriptors than file-max are
reported with printk, look for "VFS: file-max limit <number>
reached".
Attempts to allocate more file descriptors than ``file-max`` are
reported with ``printk``, look for::
VFS: file-max limit <number> reached
nr_open
-------
This denotes the maximum number of file-handles a process can
allocate. Default value is 1024*1024 (1048576) which should be
enough for most machines. Actual limit depends on RLIMIT_NOFILE
resource limit.
in the kernel logs.
inode-nr & inode-state
......@@ -125,22 +102,38 @@ inode-nr & inode-state
As with file handles, the kernel allocates the inode structures
dynamically, but can't free them yet.
The file inode-nr contains the first two items from
inode-state, so we'll skip to that file...
The file ``inode-nr`` contains the first two items from
``inode-state``, so we'll skip to that file...
Inode-state contains three actual numbers and four dummies.
The actual numbers are, in order of appearance, nr_inodes,
nr_free_inodes and preshrink.
``inode-state`` contains three actual numbers and four dummies.
The actual numbers are, in order of appearance, ``nr_inodes``,
``nr_free_inodes`` and ``preshrink``.
Nr_inodes stands for the number of inodes the system has
``nr_inodes`` stands for the number of inodes the system has
allocated.
Nr_free_inodes represents the number of free inodes (?) and
``nr_free_inodes`` represents the number of free inodes (?) and
preshrink is nonzero when the
system needs to prune the inode list instead of allocating
more.
mount-max
---------
This denotes the maximum number of mounts that may exist
in a mount namespace.
nr_open
-------
This denotes the maximum number of file-handles a process can
allocate. Default value is 1024*1024 (1048576) which should be
enough for most machines. Actual limit depends on ``RLIMIT_NOFILE``
resource limit.
overflowgid & overflowuid
-------------------------
......@@ -168,7 +161,7 @@ pipe-user-pages-soft
Maximum total number of pages a non-privileged user may allocate for pipes
before the pipe size gets limited to a single page. Once this limit is reached,
new pipes will be limited to a single page in size for this user in order to
limit total memory usage, and trying to increase them using fcntl() will be
limit total memory usage, and trying to increase them using ``fcntl()`` will be
denied until usage goes below the limit again. The default value allows to
allocate up to 1024 pipes at their default size. When set to 0, no limit is
applied.
......@@ -183,7 +176,7 @@ file.
When set to "0", writing to FIFOs is unrestricted.
When set to "1" don't allow O_CREAT open on FIFOs that we don't own
When set to "1" don't allow ``O_CREAT`` open on FIFOs that we don't own
in world writable sticky directories, unless they are owned by the
owner of the directory.
......@@ -197,7 +190,7 @@ protected_hardlinks
A long-standing class of security issues is the hardlink-based
time-of-check-time-of-use race, most commonly seen in world-writable
directories like /tmp. The common method of exploitation of this flaw
directories like ``/tmp``. The common method of exploitation of this flaw
is to cross privilege boundaries when following a given hardlink (i.e. a
root process follows a hardlink created by another user). Additionally,
on systems without separated partitions, this stops unauthorized users
......@@ -215,13 +208,13 @@ This protection is based on the restrictions in Openwall and grsecurity.
protected_regular
-----------------
This protection is similar to protected_fifos, but it
This protection is similar to `protected_fifos`_, but it
avoids writes to an attacker-controlled regular file, where a program
expected to create one.
When set to "0", writing to regular files is unrestricted.
When set to "1" don't allow O_CREAT open on regular files that we
When set to "1" don't allow ``O_CREAT`` open on regular files that we
don't own in world writable sticky directories, unless they are
owned by the owner of the directory.
......@@ -233,7 +226,7 @@ protected_symlinks
A long-standing class of security issues is the symlink-based
time-of-check-time-of-use race, most commonly seen in world-writable
directories like /tmp. The common method of exploitation of this flaw
directories like ``/tmp``. The common method of exploitation of this flaw
is to cross privilege boundaries when following a given symlink (i.e. a
root process follows a symlink belonging to another user). For a likely
incomplete list of hundreds of examples across the years, please see:
......@@ -248,23 +241,25 @@ follower match, or when the directory owner matches the symlink's owner.
This protection is based on the restrictions in Openwall and grsecurity.
suid_dumpable:
--------------
suid_dumpable
-------------
This value can be used to query and set the core dump mode for setuid
or otherwise protected/tainted binaries. The modes are
= ========== ===============================================================
0 (default) traditional behaviour. Any process which has changed
0 (default) Traditional behaviour. Any process which has changed
privilege levels or is execute only will not be dumped.
1 (debug) all processes dump core when possible. The core dump is
1 (debug) All processes dump core when possible. The core dump is
owned by the current user and no security is applied. This is
intended for system debugging situations only.
Ptrace is unchecked.
This is insecure as it allows regular users to examine the
memory contents of privileged processes.
2 (suidsafe) any binary which normally would not be dumped is dumped
anyway, but only if the "core_pattern" kernel sysctl is set to
2 (suidsafe) Any binary which normally would not be dumped is dumped
anyway, but only if the ``core_pattern`` kernel sysctl (see
:ref:`Documentation/admin-guide/sysctl/kernel.rst <core_pattern>`)
is set to
either a pipe handler or a fully qualified path. (For more
details on this limitation, see CVE-2006-2451.) This mode is
appropriate when administrators are attempting to debug
......@@ -277,18 +272,11 @@ or otherwise protected/tainted binaries. The modes are
= ========== ===============================================================
mount-max
---------
This denotes the maximum number of mounts that may exist
in a mount namespace.
2. /proc/sys/fs/binfmt_misc
===========================
Documentation for the files in /proc/sys/fs/binfmt_misc is
Documentation for the files in ``/proc/sys/fs/binfmt_misc`` is
in Documentation/admin-guide/binfmt-misc.rst.
......@@ -301,28 +289,32 @@ creation of a user space library that implements the POSIX message queues
API (as noted by the MSG tag in the POSIX 1003.1-2001 version of the System
Interfaces specification.)
The "mqueue" filesystem contains values for determining/setting the amount of
resources used by the file system.
The "mqueue" filesystem contains values for determining/setting the
amount of resources used by the file system.
/proc/sys/fs/mqueue/queues_max is a read/write file for setting/getting the
maximum number of message queues allowed on the system.
``/proc/sys/fs/mqueue/queues_max`` is a read/write file for
setting/getting the maximum number of message queues allowed on the
system.
/proc/sys/fs/mqueue/msg_max is a read/write file for setting/getting the
maximum number of messages in a queue value. In fact it is the limiting value
for another (user) limit which is set in mq_open invocation. This attribute of
a queue must be less or equal then msg_max.
``/proc/sys/fs/mqueue/msg_max`` is a read/write file for
setting/getting the maximum number of messages in a queue value. In
fact it is the limiting value for another (user) limit which is set in
``mq_open`` invocation. This attribute of a queue must be less than
or equal to ``msg_max``.
/proc/sys/fs/mqueue/msgsize_max is a read/write file for setting/getting the
maximum message size value (it is every message queue's attribute set during
its creation).
``/proc/sys/fs/mqueue/msgsize_max`` is a read/write file for
setting/getting the maximum message size value (it is an attribute of
every message queue, set during its creation).
/proc/sys/fs/mqueue/msg_default is a read/write file for setting/getting the
default number of messages in a queue value if attr parameter of mq_open(2) is
NULL. If it exceed msg_max, the default value is initialized msg_max.
``/proc/sys/fs/mqueue/msg_default`` is a read/write file for
setting/getting the default number of messages in a queue value if the
``attr`` parameter of ``mq_open(2)`` is ``NULL``. If it exceeds
``msg_max``, the default value is initialized to ``msg_max``.
/proc/sys/fs/mqueue/msgsize_default is a read/write file for setting/getting
the default message size value if attr parameter of mq_open(2) is NULL. If it
exceed msgsize_max, the default value is initialized msgsize_max.
``/proc/sys/fs/mqueue/msgsize_default`` is a read/write file for
setting/getting the default message size value if the ``attr``
parameter of ``mq_open(2)`` is ``NULL``. If it exceeds
``msgsize_max``, the default value is initialized to ``msgsize_max``.
4. /proc/sys/fs/epoll - Configuration options for the epoll interface
=====================================================================
......@@ -336,7 +328,7 @@ Every epoll file descriptor can store a number of files to be monitored
for event readiness. Each one of these monitored files constitutes a "watch".
This configuration option sets the maximum number of "watches" that are
allowed for each user.
Each "watch" costs roughly 90 bytes on a 32bit kernel, and roughly 160 bytes
on a 64bit one.
The current default value for max_user_watches is the 1/25 (4%) of the
available low memory, divided for the "watch" cost in bytes.
Each "watch" costs roughly 90 bytes on a 32-bit kernel, and roughly 160 bytes
on a 64-bit one.
The current default value for ``max_user_watches`` is 4% of the
available low memory, divided by the "watch" cost in bytes.
......@@ -139,6 +139,8 @@ Highest valid capability of the running kernel. Exports
``CAP_LAST_CAP`` from the kernel.
.. _core_pattern:
core_pattern
============
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment