Commit aadf1f0f authored by stephen hemminger's avatar stephen hemminger Committed by David S. Miller

Revert "skge: check for PCI dma mapping errors"

As reported by several people...

The code in rx_clean was panic'ing so revert
commit d0249e44.
Will redo DMA mapping checks as new patches for a later release.
Signed-off-by: default avatarStephen Hemminger <shemminger@vyatta.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 7e2eb99c
......@@ -931,20 +931,17 @@ static int skge_ring_alloc(struct skge_ring *ring, void *vaddr, u32 base)
}
/* Allocate and setup a new buffer for receiving */
static int skge_rx_setup(struct pci_dev *pdev,
struct skge_element *e,
static void skge_rx_setup(struct skge_port *skge, struct skge_element *e,
struct sk_buff *skb, unsigned int bufsize)
{
struct skge_rx_desc *rd = e->desc;
dma_addr_t map;
u64 map;
map = pci_map_single(pdev, skb->data, bufsize,
map = pci_map_single(skge->hw->pdev, skb->data, bufsize,
PCI_DMA_FROMDEVICE);
if (pci_dma_mapping_error(pdev, map))
goto mapping_error;
rd->dma_lo = lower_32_bits(map);
rd->dma_hi = upper_32_bits(map);
rd->dma_lo = map;
rd->dma_hi = map >> 32;
e->skb = skb;
rd->csum1_start = ETH_HLEN;
rd->csum2_start = ETH_HLEN;
......@@ -956,13 +953,6 @@ static int skge_rx_setup(struct pci_dev *pdev,
rd->control = BMU_OWN | BMU_STF | BMU_IRQ_EOF | BMU_TCP_CHECK | bufsize;
dma_unmap_addr_set(e, mapaddr, map);
dma_unmap_len_set(e, maplen, bufsize);
return 0;
mapping_error:
if (net_ratelimit())
dev_warn(&pdev->dev, "%s: rx mapping error\n",
skb->dev->name);
return -EIO;
}
/* Resume receiving using existing skb,
......@@ -1024,11 +1014,7 @@ static int skge_rx_fill(struct net_device *dev)
return -ENOMEM;
skb_reserve(skb, NET_IP_ALIGN);
if (skge_rx_setup(skge->hw->pdev, e, skb, skge->rx_buf_size)) {
kfree_skb(skb);
return -ENOMEM;
}
skge_rx_setup(skge, e, skb, skge->rx_buf_size);
} while ((e = e->next) != ring->start);
ring->to_clean = ring->start;
......@@ -2743,7 +2729,7 @@ static netdev_tx_t skge_xmit_frame(struct sk_buff *skb,
struct skge_tx_desc *td;
int i;
u32 control, len;
dma_addr_t map;
u64 map;
if (skb_padto(skb, ETH_ZLEN))
return NETDEV_TX_OK;
......@@ -2757,14 +2743,11 @@ static netdev_tx_t skge_xmit_frame(struct sk_buff *skb,
e->skb = skb;
len = skb_headlen(skb);
map = pci_map_single(hw->pdev, skb->data, len, PCI_DMA_TODEVICE);
if (pci_dma_mapping_error(hw->pdev, map))
goto mapping_error;
dma_unmap_addr_set(e, mapaddr, map);
dma_unmap_len_set(e, maplen, len);
td->dma_lo = lower_32_bits(map);
td->dma_hi = upper_32_bits(map);
td->dma_lo = map;
td->dma_hi = map >> 32;
if (skb->ip_summed == CHECKSUM_PARTIAL) {
const int offset = skb_checksum_start_offset(skb);
......@@ -2795,16 +2778,14 @@ static netdev_tx_t skge_xmit_frame(struct sk_buff *skb,
map = skb_frag_dma_map(&hw->pdev->dev, frag, 0,
skb_frag_size(frag), DMA_TO_DEVICE);
if (dma_mapping_error(&hw->pdev->dev, map))
goto mapping_unwind;
e = e->next;
e->skb = skb;
tf = e->desc;
BUG_ON(tf->control & BMU_OWN);
tf->dma_lo = lower_32_bits(map);
tf->dma_hi = upper_32_bits(map);
tf->dma_lo = map;
tf->dma_hi = (u64) map >> 32;
dma_unmap_addr_set(e, mapaddr, map);
dma_unmap_len_set(e, maplen, skb_frag_size(frag));
......@@ -2834,28 +2815,6 @@ static netdev_tx_t skge_xmit_frame(struct sk_buff *skb,
}
return NETDEV_TX_OK;
mapping_unwind:
/* unroll any pages that were already mapped. */
if (e != skge->tx_ring.to_use) {
struct skge_element *u;
for (u = skge->tx_ring.to_use->next; u != e; u = u->next)
pci_unmap_page(hw->pdev, dma_unmap_addr(u, mapaddr),
dma_unmap_len(u, maplen),
PCI_DMA_TODEVICE);
e = skge->tx_ring.to_use;
}
/* undo the mapping for the skb header */
pci_unmap_single(hw->pdev, dma_unmap_addr(e, mapaddr),
dma_unmap_len(e, maplen),
PCI_DMA_TODEVICE);
mapping_error:
/* mapping error causes error message and packet to be discarded. */
if (net_ratelimit())
dev_warn(&hw->pdev->dev, "%s: tx mapping error\n", dev->name);
dev_kfree_skb(skb);
return NETDEV_TX_OK;
}
......@@ -3099,17 +3058,13 @@ static struct sk_buff *skge_rx_get(struct net_device *dev,
if (!nskb)
goto resubmit;
if (unlikely(skge_rx_setup(skge->hw->pdev, e, nskb, skge->rx_buf_size))) {
dev_kfree_skb(nskb);
goto resubmit;
}
pci_unmap_single(skge->hw->pdev,
dma_unmap_addr(e, mapaddr),
dma_unmap_len(e, maplen),
PCI_DMA_FROMDEVICE);
skb = e->skb;
prefetch(skb->data);
skge_rx_setup(skge, e, nskb, skge->rx_buf_size);
}
skb_put(skb, len);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment