Skip to content

L
linux
Commit ab85b120 authored by Samuel Ortiz's avatar Samuel Ortiz
Browse files
Options

mfd: Kconfig alphabetical re-ordering 

Ordering so many Kconfig alphabetically makes it a lot easier to read e.g.
from menuconfig.
Signed-off-by: default avatarSamuel Ortiz <sameo@linux.intel.com>
parent 230f13a5
Hide whitespace changes
Inline Side-by-side
Showing with 774 additions and 771 deletions
drivers/mfd/Kconfig
View file @ ab85b120
...@@ -10,19 +10,45 @@ config MFD_CORE ...@@ -10,19 +10,45 @@ config MFD_CORE
select IRQ_DOMAIN select IRQ_DOMAIN
default n default n
config MFD_88PM860X config MFD_CS5535
bool "Support Marvell 88PM8606/88PM8607" tristate "AMD CS5535 and CS5536 southbridge core functions"
depends on I2C=y && GENERIC_HARDIRQS select MFD_CORE
depends on PCI && X86
---help---
This is the core driver for CS5535/CS5536 MFD functions. This is
necessary for using the board's GPIO and MFGPT functionality.
config MFD_AS3711
bool "AMS AS3711"
select MFD_CORE
select REGMAP_I2C select REGMAP_I2C
select REGMAP_IRQ
depends on I2C=y && GENERIC_HARDIRQS
help
Support for the AS3711 PMIC from AMS
config PMIC_ADP5520
bool "Analog Devices ADP5520/01 MFD PMIC Core Support"
depends on I2C=y
help
Say yes here to add support for Analog Devices AD5520 and ADP5501,
Multifunction Power Management IC. This includes
the I2C driver and the core APIs _only_, you have to select
individual components like LCD backlight, LEDs, GPIOs and Kepad
under the corresponding menus.
config MFD_AAT2870_CORE
bool "AnalogicTech AAT2870"
select MFD_CORE select MFD_CORE
depends on I2C=y && GPIOLIB && GENERIC_HARDIRQS
help help
This supports for Marvell 88PM8606/88PM8607 Power Management IC. If you say yes here you get support for the AAT2870.
This includes the I2C driver and the core APIs _only_, you have to This driver provides common support for accessing the device,
select individual components like voltage regulators, RTC and additional drivers must be enabled in order to use the
battery-charger under the corresponding menus. functionality of the device.
config MFD_CROS_EC config MFD_CROS_EC
tristate "Support ChromeOS Embedded Controller" tristate "ChromeOS Embedded Controller"
select MFD_CORE select MFD_CORE
help help
If you say Y here you get support for the ChromeOS Embedded If you say Y here you get support for the ChromeOS Embedded
...@@ -50,100 +76,98 @@ config MFD_CROS_EC_SPI ...@@ -50,100 +76,98 @@ config MFD_CROS_EC_SPI
response time cannot be guaranteed, we support ignoring response time cannot be guaranteed, we support ignoring
'pre-amble' bytes before the response actually starts. 'pre-amble' bytes before the response actually starts.
config MFD_88PM800 config MFD_ASIC3
tristate "Support Marvell 88PM800" bool "Compaq ASIC3"
depends on I2C=y && GENERIC_HARDIRQS depends on GENERIC_HARDIRQS && GPIOLIB && ARM
select REGMAP_I2C
select REGMAP_IRQ
select MFD_CORE select MFD_CORE
---help---
This driver supports the ASIC3 multifunction chip found on many
PDAs (mainly iPAQ and HTC based ones)
config PMIC_DA903X
bool "Dialog Semiconductor DA9030/DA9034 PMIC Support"
depends on I2C=y
help help
This supports for Marvell 88PM800 Power Management IC. Say yes here to support for Dialog Semiconductor DA9030 (a.k.a
This includes the I2C driver and the core APIs _only_, you have to ARAVA) and DA9034 (a.k.a MICCO), these are Power Management IC
select individual components like voltage regulators, RTC and usually found on PXA processors-based platforms. This includes
battery-charger under the corresponding menus. the I2C driver and the core APIs _only_, you have to select
individual components like LCD backlight, voltage regulators,
LEDs and battery-charger under the corresponding menus.
config MFD_88PM805 config PMIC_DA9052
tristate "Support Marvell 88PM805" bool
depends on I2C=y && GENERIC_HARDIRQS
select REGMAP_I2C
select REGMAP_IRQ
select MFD_CORE select MFD_CORE
help
This supports for Marvell 88PM805 Power Management IC. This includes
the I2C driver and the core APIs _only_, you have to select individual
components like codec device, headset/Mic device under the
corresponding menus.
config MFD_SM501 config MFD_DA9052_SPI
tristate "Support for Silicon Motion SM501" bool "Dialog Semiconductor DA9052/53 PMIC variants with SPI"
---help--- select REGMAP_SPI
This is the core driver for the Silicon Motion SM501 multimedia select REGMAP_IRQ
companion chip. This device is a multifunction device which may select PMIC_DA9052
provide numerous interfaces including USB host controller, USB gadget, depends on SPI_MASTER=y && GENERIC_HARDIRQS
asynchronous serial ports, audio functions, and a dual display video help
interface. The device may be connected by PCI or local bus with Support for the Dialog Semiconductor DA9052 PMIC
varying functions enabled. when controlled using SPI. This driver provides common support
for accessing the device, additional drivers must be enabled in
order to use the functionality of the device.
config MFD_SM501_GPIO config MFD_DA9052_I2C
bool "Export GPIO via GPIO layer" bool "Dialog Semiconductor DA9052/53 PMIC variants with I2C"
depends on MFD_SM501 && GPIOLIB select REGMAP_I2C
---help--- select REGMAP_IRQ
This option uses the gpio library layer to export the 64 GPIO select PMIC_DA9052
lines on the SM501. The platform data is used to supply the depends on I2C=y && GENERIC_HARDIRQS
base number for the first GPIO line to register. help
Support for the Dialog Semiconductor DA9052 PMIC
when controlled using I2C. This driver provides common support
for accessing the device, additional drivers must be enabled in
order to use the functionality of the device.
config MFD_RTSX_PCI config MFD_DA9055
tristate "Support for Realtek PCI-E card reader" bool "Dialog Semiconductor DA9055 PMIC Support"
depends on PCI && GENERIC_HARDIRQS select REGMAP_I2C
select REGMAP_IRQ
select MFD_CORE select MFD_CORE
depends on I2C=y && GENERIC_HARDIRQS
help help
This supports for Realtek PCI-Express card reader including rts5209, Say yes here for support of Dialog Semiconductor DA9055. This is
rts5229, rtl8411, etc. Realtek card reader supports access to many a Power Management IC. This driver provides common support for
types of memory cards, such as Memory Stick, Memory Stick Pro, accessing the device as well as the I2C interface to the chip itself.
Secure Digital and MultiMediaCard. Additional drivers must be enabled in order to use the functionality
of the device.
config MFD_ASIC3 This driver can be built as a module. If built as a module it will be
bool "Support for Compaq ASIC3" called "da9055"
depends on GENERIC_HARDIRQS && GPIOLIB && ARM
select MFD_CORE
---help---
This driver supports the ASIC3 multifunction chip found on many
PDAs (mainly iPAQ and HTC based ones)
config MFD_DAVINCI_VOICECODEC config MFD_MC13783
tristate tristate
select MFD_CORE
config MFD_DM355EVM_MSP
bool "DaVinci DM355 EVM microcontroller"
depends on I2C=y && MACH_DAVINCI_DM355_EVM
help
This driver supports the MSP430 microcontroller used on these
boards. MSP430 firmware manages resets and power sequencing,
inputs from buttons and the IR remote, LEDs, an RTC, and more.
config MFD_TI_SSP config MFD_MC13XXX
tristate "TI Sequencer Serial Port support" tristate
depends on ARCH_DAVINCI_TNETV107X && GENERIC_HARDIRQS depends on (SPI_MASTER || I2C) && GENERIC_HARDIRQS
select MFD_CORE select MFD_CORE
---help--- select MFD_MC13783
Say Y here if you want support for the Sequencer Serial Port help
in a Texas Instruments TNETV107X SoC. Enable support for the Freescale MC13783 and MC13892 PMICs.
This driver provides common support for accessing the device,
additional drivers must be enabled in order to use the
functionality of the device.
To compile this driver as a module, choose M here: the config MFD_MC13XXX_SPI
module will be called ti-ssp. tristate "Freescale MC13783 and MC13892 SPI interface"
depends on SPI_MASTER && GENERIC_HARDIRQS
select REGMAP_SPI
select MFD_MC13XXX
help
Select this if your MC13xxx is connected via an SPI bus.
config MFD_TI_AM335X_TSCADC config MFD_MC13XXX_I2C
tristate "TI ADC / Touch Screen chip support" tristate "Freescale MC13892 I2C interface"
select MFD_CORE depends on I2C && GENERIC_HARDIRQS
select REGMAP select REGMAP_I2C
select REGMAP_MMIO select MFD_MC13XXX
depends on GENERIC_HARDIRQS
help help
If you say yes here you get support for Texas Instruments series Select this if your MC13xxx is connected via an I2C bus.
of Touch Screen /ADC chips.
To compile this driver as a module, choose M here: the
module will be called ti_am335x_tscadc.
config HTC_EGPIO config HTC_EGPIO
bool "HTC EGPIO support" bool "HTC EGPIO support"
...@@ -172,281 +196,317 @@ config HTC_I2CPLD ...@@ -172,281 +196,317 @@ config HTC_I2CPLD
This device provides input and output GPIOs through an I2C This device provides input and output GPIOs through an I2C
interface to one or more sub-chips. interface to one or more sub-chips.
config UCB1400_CORE config LPC_ICH
tristate "Philips UCB1400 Core driver" tristate "Intel ICH LPC"
depends on AC97_BUS depends on PCI && GENERIC_HARDIRQS
depends on GPIOLIB select MFD_CORE
help help
This enables support for the Philips UCB1400 core functions. The LPC bridge function of the Intel ICH provides support for
The UCB1400 is an AC97 audio codec. many functional units. This driver provides needed support for
other drivers to control these functions, currently GPIO and
To compile this driver as a module, choose M here: the watchdog.
module will be called ucb1400_core.
config MFD_LM3533 config LPC_SCH
tristate "LM3533 Lighting Power chip" tristate "Intel SCH LPC"
depends on I2C depends on PCI && GENERIC_HARDIRQS
select MFD_CORE select MFD_CORE
select REGMAP_I2C
depends on GENERIC_HARDIRQS
help help
Say yes here to enable support for National Semiconductor / TI LPC bridge function of the Intel SCH provides support for
LM3533 Lighting Power chips. System Management Bus and General Purpose I/O.
This driver provides common support for accessing the device;
additional drivers must be enabled in order to use the LED,
backlight or ambient-light-sensor functionality of the device.
config TPS6105X config MFD_INTEL_MSIC
tristate "TPS61050/61052 Boost Converters" bool "Intel MSIC"
depends on I2C depends on INTEL_SCU_IPC
select REGULATOR
select MFD_CORE select MFD_CORE
select REGULATOR_FIXED_VOLTAGE
depends on GENERIC_HARDIRQS
help help
This option enables a driver for the TP61050/TPS61052 Select this option to enable access to Intel MSIC (Avatele
high-power "white LED driver". This boost converter is Passage) chip. This chip embeds audio, battery, GPIO, etc.
sometimes used for other things than white LEDs, and devices used in Intel Medfield platforms.
also contains a GPIO pin.
config TPS65010 config MFD_JANZ_CMODIO
tristate "TPS6501x Power Management chips" tristate "Janz CMOD-IO PCI MODULbus Carrier Board"
depends on I2C && GPIOLIB select MFD_CORE
default y if MACH_OMAP_H2 || MACH_OMAP_H3 || MACH_OMAP_OSK depends on PCI && GENERIC_HARDIRQS
help help
If you say yes here you get support for the TPS6501x series of This is the core driver for the Janz CMOD-IO PCI MODULbus
Power Management chips. These include voltage regulators, carrier board. This device is a PCI to MODULbus bridge which may
lithium ion/polymer battery charging, and other features that host many different types of MODULbus daughterboards, including
are often used in portable devices like cell phones and cameras. CAN and GPIO controllers.
This driver can also be built as a module. If so, the module
will be called tps65010.
config TPS6507X config MFD_JZ4740_ADC
tristate "TPS6507x Power Management / Touch Screen chips" bool "Janz JZ4740 ADC core"
select MFD_CORE select MFD_CORE
depends on I2C && GENERIC_HARDIRQS select GENERIC_IRQ_CHIP
depends on MACH_JZ4740
help help
If you say yes here you get support for the TPS6507x series of Say yes here if you want support for the ADC unit in the JZ4740 SoC.
Power Management / Touch Screen chips. These include voltage This driver is necessary for jz4740-battery and jz4740-hwmon driver.
regulators, lithium ion/polymer battery charging, touch screen
and other features that are often used in portable devices.
This driver can also be built as a module. If so, the module
will be called tps6507x.
config MFD_TPS65217 config MFD_88PM800
tristate "TPS65217 Power Management / White LED chips" tristate "Marvell 88PM800"
depends on I2C && GENERIC_HARDIRQS depends on I2C=y && GENERIC_HARDIRQS
select MFD_CORE
select REGMAP_I2C select REGMAP_I2C
select REGMAP_IRQ
select MFD_CORE
help help
If you say yes here you get support for the TPS65217 series of This supports for Marvell 88PM800 Power Management IC.
Power Management / White LED chips. This includes the I2C driver and the core APIs _only_, you have to
These include voltage regulators, lithium ion/polymer battery select individual components like voltage regulators, RTC and
charger, wled and other features that are often used in portable battery-charger under the corresponding menus.
devices.
This driver can also be built as a module. If so, the module
will be called tps65217.
config MFD_TPS6586X config MFD_88PM805
bool "TPS6586x Power Management chips" tristate "Marvell 88PM805"
depends on I2C=y && GENERIC_HARDIRQS depends on I2C=y && GENERIC_HARDIRQS
select MFD_CORE
select REGMAP_I2C select REGMAP_I2C
select REGMAP_IRQ
select MFD_CORE
help help
If you say yes here you get support for the TPS6586X series of This supports for Marvell 88PM805 Power Management IC. This includes
Power Management chips. the I2C driver and the core APIs _only_, you have to select individual
This driver provides common support for accessing the device, components like codec device, headset/Mic device under the
additional drivers must be enabled in order to use the corresponding menus.
functionality of the device.
This driver can also be built as a module. If so, the module config MFD_88PM860X
will be called tps6586x. bool "Marvell 88PM8606/88PM8607"
depends on I2C=y && GENERIC_HARDIRQS
select REGMAP_I2C
select MFD_CORE
help
This supports for Marvell 88PM8606/88PM8607 Power Management IC.
This includes the I2C driver and the core APIs _only_, you have to
select individual components like voltage regulators, RTC and
battery-charger under the corresponding menus.
config MFD_TPS65910 config MFD_MAX77686
bool "TPS65910 Power Management chip" bool "Maxim Semiconductor MAX77686 PMIC Support"
depends on I2C=y && GPIOLIB && GENERIC_HARDIRQS depends on I2C=y && GENERIC_HARDIRQS
select MFD_CORE select MFD_CORE
select REGMAP_I2C select REGMAP_I2C
select REGMAP_IRQ
select IRQ_DOMAIN select IRQ_DOMAIN
help help
if you say yes here you get support for the TPS65910 series of Say yes here to support for Maxim Semiconductor MAX77686.
Power Management chips. This is a Power Management IC with RTC on chip.
This driver provides common support for accessing the device;
config MFD_TPS65912 additional drivers must be enabled in order to use the functionality
bool of the device.
depends on GPIOLIB
config MFD_TPS65912_I2C config MFD_MAX77693
bool "TPS65912 Power Management chip with I2C" bool "Maxim Semiconductor MAX77693 PMIC Support"
depends on I2C=y && GENERIC_HARDIRQS
select MFD_CORE select MFD_CORE
select MFD_TPS65912 select REGMAP_I2C
depends on I2C=y && GPIOLIB && GENERIC_HARDIRQS
help help
If you say yes here you get support for the TPS65912 series of Say yes here to support for Maxim Semiconductor MAX77693.
PM chips with I2C interface. This is a companion Power Management IC with Flash, Haptic, Charger,
and MUIC(Micro USB Interface Controller) controls on chip.
This driver provides common support for accessing the device;
additional drivers must be enabled in order to use the functionality
of the device.
config MFD_TPS65912_SPI config MFD_MAX8907
bool "TPS65912 Power Management chip with SPI" tristate "Maxim Semiconductor MAX8907 PMIC Support"
select MFD_CORE select MFD_CORE
select MFD_TPS65912
depends on SPI_MASTER && GPIOLIB && GENERIC_HARDIRQS
help
If you say yes here you get support for the TPS65912 series of
PM chips with SPI interface.
config MFD_TPS80031
bool "TI TPS80031/TPS80032 Power Management chips"
depends on I2C=y && GENERIC_HARDIRQS depends on I2C=y && GENERIC_HARDIRQS
select MFD_CORE
select REGMAP_I2C select REGMAP_I2C
select REGMAP_IRQ select REGMAP_IRQ
help help
If you say yes here you get support for the Texas Instruments Say yes here to support for Maxim Semiconductor MAX8907. This is
TPS80031/ TPS80032 Fully Integrated Power Management with Power a Power Management IC. This driver provides common support for
Path and Battery Charger. The device provides five configurable accessing the device; additional drivers must be enabled in order
step-down converters, 11 general purpose LDOs, USB OTG Module, to use the functionality of the device.
ADC, RTC, 2 PWM, System Voltage Regulator/Battery Charger with
Power Path from USB, 32K clock generator.
config MENELAUS config MFD_MAX8925
bool "Texas Instruments TWL92330/Menelaus PM chip" bool "Maxim Semiconductor MAX8925 PMIC Support"
depends on I2C=y && ARCH_OMAP2 depends on I2C=y && GENERIC_HARDIRQS
select MFD_CORE
help help
If you say yes here you get support for the Texas Instruments Say yes here to support for Maxim Semiconductor MAX8925. This is
TWL92330/Menelaus Power Management chip. This include voltage a Power Management IC. This driver provides common support for
regulators, Dual slot memory card transceivers, real-time clock accessing the device, additional drivers must be enabled in order
and other features that are often used in portable devices like to use the functionality of the device.
cell phones and PDAs.
config TWL4030_CORE config MFD_MAX8997
bool "Texas Instruments TWL4030/TWL5030/TWL6030/TPS659x0 Support" bool "Maxim Semiconductor MAX8997/8966 PMIC Support"
depends on I2C=y && GENERIC_HARDIRQS depends on I2C=y && GENERIC_HARDIRQS
select MFD_CORE
select IRQ_DOMAIN select IRQ_DOMAIN
select REGMAP_I2C
help help
Say yes here if you have TWL4030 / TWL6030 family chip on your board. Say yes here to support for Maxim Semiconductor MAX8997/8966.
This core driver provides register access and IRQ handling This is a Power Management IC with RTC, Flash, Fuel Gauge, Haptic,
facilities, and registers devices for the various functions MUIC controls on chip.
so that function-specific drivers can bind to them. This driver provides common support for accessing the device;
additional drivers must be enabled in order to use the functionality
These multi-function chips are found on many OMAP2 and OMAP3 of the device.
boards, providing power management, RTC, GPIO, keypad, a
high speed USB OTG transceiver, an audio codec (on most
versions) and many other features.
config TWL4030_MADC config MFD_MAX8998
tristate "Texas Instruments TWL4030 MADC" bool "Maxim Semiconductor MAX8998/National LP3974 PMIC Support"
depends on TWL4030_CORE depends on I2C=y && GENERIC_HARDIRQS
select MFD_CORE
help help
This driver provides support for triton TWL4030-MADC. The Say yes here to support for Maxim Semiconductor MAX8998 and
driver supports both RT and SW conversion methods. National Semiconductor LP3974. This is a Power Management IC.
This driver provides common support for accessing the device,
This driver can be built as a module. If so it will be additional drivers must be enabled in order to use the functionality
named twl4030-madc of the device.
config TWL4030_POWER config EZX_PCAP
bool "Support power resources on TWL4030 family chips" bool "Motorola EZXPCAP Support"
depends on TWL4030_CORE && ARM depends on GENERIC_HARDIRQS && SPI_MASTER
help help
Say yes here if you want to use the power resources on the This enables the PCAP ASIC present on EZX Phones. This is
TWL4030 family chips. Most of these resources are regulators, needed for MMC, TouchScreen, Sound, USB, etc..
which have a separate driver; some are control signals, such
as clock request handshaking.
This driver uses board-specific data to initialize the resources
and load scripts controlling which resources are switched off/on
or reset when a sleep, wakeup or warm reset event occurs.
config MFD_TWL4030_AUDIO config MFD_VIPERBOARD
bool tristate "Nano River Technologies Viperboard"
depends on TWL4030_CORE && GENERIC_HARDIRQS
select MFD_CORE select MFD_CORE
depends on USB && GENERIC_HARDIRQS
default n default n
help
Say yes here if you want support for Nano River Technologies
Viperboard.
There are mfd cell drivers available for i2c master, adc and
both gpios found on the board. The spi part does not yet
have a driver.
You need to select the mfd cell drivers separately.
The drivers do not support all features the board exposes.
config TWL6040_CORE config MFD_RETU
bool "Support for TWL6040 audio codec" tristate "Nokia Retu multi-function device"
depends on I2C=y && GENERIC_HARDIRQS
select MFD_CORE select MFD_CORE
select REGMAP_I2C depends on I2C && GENERIC_HARDIRQS
select REGMAP_IRQ select REGMAP_IRQ
default n
help help
Say yes here if you want support for Texas Instruments TWL6040 audio Retu is a multi-function device found on Nokia Internet Tablets
codec. (770, N800 and N810).
This driver provides common support for accessing the device,
additional drivers must be enabled in order to use the
functionality of the device (audio, vibra).
config MFD_STMPE config MFD_PCF50633
bool "Support STMicroelectronics STMPE" tristate "NXP PCF50633"
depends on (I2C=y || SPI_MASTER=y) && GENERIC_HARDIRQS depends on I2C
select MFD_CORE select REGMAP_I2C
help help
Support for the STMPE family of I/O Expanders from Say yes here if you have NXP PCF50633 chip on your board.
STMicroelectronics. This core driver provides register access and IRQ handling
facilities, and registers devices for the various functions
Currently supported devices are: so that function-specific drivers can bind to them.
STMPE811: GPIO, Touchscreen
STMPE1601: GPIO, Keypad
STMPE1801: GPIO, Keypad
STMPE2401: GPIO, Keypad
STMPE2403: GPIO, Keypad
This driver provides common support for accessing the device,
additional drivers must be enabled in order to use the functionality
of the device. Currently available sub drivers are:
GPIO: stmpe-gpio
Keypad: stmpe-keypad
Touchscreen: stmpe-ts
menu "STMPE Interface Drivers"
depends on MFD_STMPE
config STMPE_I2C config PCF50633_ADC
bool "STMPE I2C Inteface" tristate "NXP PCF50633 ADC"
depends on I2C=y depends on MFD_PCF50633
default y
help help
This is used to enable I2C interface of STMPE Say yes here if you want to include support for ADC in the
NXP PCF50633 chip.
config STMPE_SPI config PCF50633_GPIO
bool "STMPE SPI Inteface" tristate "NXP PCF50633 GPIO"
depends on SPI_MASTER depends on MFD_PCF50633
help help
This is used to enable SPI interface of STMPE Say yes here if you want to include support GPIO for pins on
endmenu the PCF50633 chip.
config MFD_TC3589X config UCB1400_CORE
bool "Support Toshiba TC35892 and variants" tristate "Philips UCB1400 Core driver"
depends on I2C=y && GENERIC_HARDIRQS depends on AC97_BUS
select MFD_CORE depends on GPIOLIB
help help
Support for the Toshiba TC35892 and variants I/O Expander. This enables support for the Philips UCB1400 core functions.
The UCB1400 is an AC97 audio codec.
This driver provides common support for accessing the device, To compile this driver as a module, choose M here: the
additional drivers must be enabled in order to use the module will be called ucb1400_core.
functionality of the device.
config MFD_TMIO config MFD_PM8XXX
bool tristate
default n
config MFD_T7L66XB config MFD_PM8921_CORE
bool "Support Toshiba T7L66XB" tristate "Qualcomm PM8921 PMIC chip"
depends on ARM && HAVE_CLK && GENERIC_HARDIRQS depends on MSM_SSBI
select MFD_CORE select MFD_CORE
select MFD_TMIO select MFD_PM8XXX
help help
Support for Toshiba Mobile IO Controller T7L66XB If you say yes to this option, support will be included for the
built-in PM8921 PMIC chip.
This is required if your board has a PM8921 and uses its features,
such as: MPPs, GPIOs, regulators, interrupts, and PWM.
Say M here if you want to include support for PM8921 chip as a module.
This will build a module called "pm8921-core".
config MFD_PM8XXX_IRQ
bool "Qualcomm PM8xxx IRQ features"
depends on MFD_PM8XXX
default y if MFD_PM8XXX
help
This is the IRQ driver for Qualcomm PM 8xxx PMIC chips.
This is required to use certain other PM 8xxx features, such as GPIO
and MPP.
config MFD_RDC321X
tristate "RDC R-321x southbridge"
select MFD_CORE
depends on PCI && GENERIC_HARDIRQS
help
Say yes here if you want to have support for the RDC R-321x SoC
southbridge which provides access to GPIOs and Watchdog using the
southbridge PCI device configuration space.
config MFD_RTSX_PCI
tristate "Realtek PCI-E card reader"
depends on PCI && GENERIC_HARDIRQS
select MFD_CORE
help
This supports for Realtek PCI-Express card reader including rts5209,
rts5229, rtl8411, etc. Realtek card reader supports access to many
types of memory cards, such as Memory Stick, Memory Stick Pro,
Secure Digital and MultiMediaCard.
config MFD_RC5T583
bool "Ricoh RC5T583 Power Management system device"
depends on I2C=y && GENERIC_HARDIRQS
select MFD_CORE
select REGMAP_I2C
help
Select this option to get support for the RICOH583 Power
Management system device.
This driver provides common support for accessing the device
through i2c interface. The device supports multiple sub-devices
like GPIO, interrupts, RTC, LDO and DCDC regulators, onkey.
Additional drivers must be enabled in order to use the
different functionality of the device.
config MFD_SEC_CORE
bool "SAMSUNG Electronics PMIC Series Support"
depends on I2C=y && GENERIC_HARDIRQS
select MFD_CORE
select REGMAP_I2C
select REGMAP_IRQ
help
Support for the Samsung Electronics MFD series.
This driver provides common support for accessing the device,
additional drivers must be enabled in order to use the functionality
of the device
config MFD_SM501
tristate "Silicon Motion SM501"
---help---
This is the core driver for the Silicon Motion SM501 multimedia
companion chip. This device is a multifunction device which may
provide numerous interfaces including USB host controller, USB gadget,
asynchronous serial ports, audio functions, and a dual display video
interface. The device may be connected by PCI or local bus with
varying functions enabled.
config MFD_SM501_GPIO
bool "Export GPIO via GPIO layer"
depends on MFD_SM501 && GPIOLIB
---help---
This option uses the gpio library layer to export the 64 GPIO
lines on the SM501. The platform data is used to supply the
base number for the first GPIO line to register.
config MFD_SMSC config MFD_SMSC
bool "Support for the SMSC ECE1099 series chips" bool "SMSC ECE1099 series chips"
depends on I2C=y && GENERIC_HARDIRQS depends on I2C=y && GENERIC_HARDIRQS
select MFD_CORE select MFD_CORE
select REGMAP_I2C select REGMAP_I2C
...@@ -457,433 +517,425 @@ config MFD_SMSC ...@@ -457,433 +517,425 @@ config MFD_SMSC
To compile this driver as a module, choose M here: the To compile this driver as a module, choose M here: the
module will be called smsc. module will be called smsc.
config MFD_TC6387XB config ABX500_CORE
bool "Support Toshiba TC6387XB" bool "ST-Ericsson ABX500 Mixed Signal Circuit register functions"
depends on ARM && HAVE_CLK default y if ARCH_U300 || ARCH_U8500
select MFD_CORE
select MFD_TMIO
help help
Support for Toshiba Mobile IO Controller TC6387XB Say yes here if you have the ABX500 Mixed Signal IC family
chips. This core driver expose register access functions.
Functionality specific drivers using these functions can
remain unchanged when IC changes. Binding of the functions to
actual register access is done by the IC core driver.
config MFD_TC6393XB config AB3100_CORE
bool "Support Toshiba TC6393XB" bool "ST-Ericsson AB3100 Mixed Signal Circuit core functions"
depends on ARM && HAVE_CLK depends on I2C=y && ABX500_CORE && GENERIC_HARDIRQS
select GPIOLIB
select MFD_CORE select MFD_CORE
select MFD_TMIO default y if ARCH_U300
help help
Support for Toshiba Mobile IO Controller TC6393XB Select this to enable the AB3100 Mixed Signal IC core
functionality. This connects to a AB3100 on the I2C bus
and expose a number of symbols needed for dependent devices
to read and write registers and subscribe to events from
this multi-functional IC. This is needed to use other features
of the AB3100 such as battery-backed RTC, charging control,
LEDs, vibrator, system power and temperature, power management
and ALSA sound.
config PMIC_DA903X config AB3100_OTP
bool "Dialog Semiconductor DA9030/DA9034 PMIC Support" tristate "ST-Ericsson AB3100 OTP functions"
depends on I2C=y depends on AB3100_CORE
default y if AB3100_CORE
help help
Say yes here to support for Dialog Semiconductor DA9030 (a.k.a Select this to enable the AB3100 Mixed Signal IC OTP (one-time
ARAVA) and DA9034 (a.k.a MICCO), these are Power Management IC programmable memory) support. This exposes a sysfs file to read
usually found on PXA processors-based platforms. This includes out OTP values.
the I2C driver and the core APIs _only_, you have to select
individual components like LCD backlight, voltage regulators,
LEDs and battery-charger under the corresponding menus.
config PMIC_DA9052 config AB8500_CORE
bool bool "ST-Ericsson AB8500 Mixed Signal Power Management chip"
depends on GENERIC_HARDIRQS && ABX500_CORE && MFD_DB8500_PRCMU
select POWER_SUPPLY
select MFD_CORE select MFD_CORE
select IRQ_DOMAIN
help
Select this option to enable access to AB8500 power management
chip. This connects to U8500 either on the SSP/SPI bus (deprecated
since hardware version v1.0) or the I2C bus via PRCMU. It also adds
the irq_chip parts for handling the Mixed Signal chip events.
This chip embeds various other multimedia funtionalities as well.
config MFD_DA9052_SPI config AB8500_DEBUG
bool "Support Dialog Semiconductor DA9052/53 PMIC variants with SPI" bool "Enable debug info via debugfs"
select REGMAP_SPI depends on AB8500_CORE && DEBUG_FS
select REGMAP_IRQ default y if DEBUG_FS
select PMIC_DA9052 help
depends on SPI_MASTER=y && GENERIC_HARDIRQS Select this option if you want debug information using the debug
filesystem, debugfs.
config AB8500_GPADC
bool "ST-Ericsson AB8500 GPADC driver"
depends on AB8500_CORE && REGULATOR_AB8500
default y
help help
Support for the Dialog Semiconductor DA9052 PMIC AB8500 GPADC driver used to convert Acc and battery/ac/usb voltage
when controlled using SPI. This driver provides common support
for accessing the device, additional drivers must be enabled in
order to use the functionality of the device.
config MFD_DA9052_I2C config MFD_DB8500_PRCMU
bool "Support Dialog Semiconductor DA9052/53 PMIC variants with I2C" bool "ST-Ericsson DB8500 Power Reset Control Management Unit"
select REGMAP_I2C depends on UX500_SOC_DB8500
select REGMAP_IRQ select MFD_CORE
select PMIC_DA9052
depends on I2C=y && GENERIC_HARDIRQS
help help
Support for the Dialog Semiconductor DA9052 PMIC Select this option to enable support for the DB8500 Power Reset
when controlled using I2C. This driver provides common support and Control Management Unit. This is basically an autonomous
for accessing the device, additional drivers must be enabled in system controller running an XP70 microprocessor, which is accessed
order to use the functionality of the device. through a register map.
config MFD_DA9055 config MFD_STMPE
bool "Dialog Semiconductor DA9055 PMIC Support" bool "STMicroelectronics STMPE"
select REGMAP_I2C depends on (I2C=y || SPI_MASTER=y) && GENERIC_HARDIRQS
select REGMAP_IRQ
select MFD_CORE select MFD_CORE
depends on I2C=y && GENERIC_HARDIRQS
help help
Say yes here for support of Dialog Semiconductor DA9055. This is Support for the STMPE family of I/O Expanders from
a Power Management IC. This driver provides common support for STMicroelectronics.
accessing the device as well as the I2C interface to the chip itself.
Additional drivers must be enabled in order to use the functionality
of the device.
This driver can be built as a module. If built as a module it will be Currently supported devices are:
called "da9055"
config PMIC_ADP5520 STMPE811: GPIO, Touchscreen
bool "Analog Devices ADP5520/01 MFD PMIC Core Support" STMPE1601: GPIO, Keypad
STMPE1801: GPIO, Keypad
STMPE2401: GPIO, Keypad
STMPE2403: GPIO, Keypad
This driver provides common support for accessing the device,
additional drivers must be enabled in order to use the functionality
of the device. Currently available sub drivers are:
GPIO: stmpe-gpio
Keypad: stmpe-keypad
Touchscreen: stmpe-ts
menu "STMicroelectronics STMPE Interface Drivers"
depends on MFD_STMPE
config STMPE_I2C
bool "STMicroelectronics STMPE I2C Inteface"
depends on I2C=y depends on I2C=y
default y
help help
Say yes here to add support for Analog Devices AD5520 and ADP5501, This is used to enable I2C interface of STMPE
Multifunction Power Management IC. This includes
the I2C driver and the core APIs _only_, you have to select
individual components like LCD backlight, LEDs, GPIOs and Kepad
under the corresponding menus.
config MFD_LP8788 config STMPE_SPI
bool "Texas Instruments LP8788 Power Management Unit Driver" bool "STMicroelectronics STMPE SPI Inteface"
depends on I2C=y && GENERIC_HARDIRQS depends on SPI_MASTER
select MFD_CORE
select REGMAP_I2C
select IRQ_DOMAIN
help help
TI LP8788 PMU supports regulators, battery charger, RTC, This is used to enable SPI interface of STMPE
ADC, backlight driver and current sinks. endmenu
config MFD_MAX77686 config MFD_STA2X11
bool "Maxim Semiconductor MAX77686 PMIC Support" bool "STMicroelectronics STA2X11"
depends on I2C=y && GENERIC_HARDIRQS depends on STA2X11 && GENERIC_HARDIRQS
select MFD_CORE select MFD_CORE
select REGMAP_I2C select REGMAP_MMIO
select IRQ_DOMAIN
config MFD_SYSCON
bool "System Controller Register R/W Based on Regmap"
select REGMAP_MMIO
help help
Say yes here to support for Maxim Semiconductor MAX77686. Select this option to enable accessing system control registers
This is a Power Management IC with RTC on chip. via regmap.
This driver provides common support for accessing the device;
additional drivers must be enabled in order to use the functionality
of the device.
config MFD_MAX77693 config MFD_DAVINCI_VOICECODEC
bool "Maxim Semiconductor MAX77693 PMIC Support" tristate
depends on I2C=y && GENERIC_HARDIRQS
select MFD_CORE select MFD_CORE
select REGMAP_I2C
help
Say yes here to support for Maxim Semiconductor MAX77693.
This is a companion Power Management IC with Flash, Haptic, Charger,
and MUIC(Micro USB Interface Controller) controls on chip.
This driver provides common support for accessing the device;
additional drivers must be enabled in order to use the functionality
of the device.
config MFD_MAX8907 config MFD_TI_AM335X_TSCADC
tristate "Maxim Semiconductor MAX8907 PMIC Support" tristate "TI ADC / Touch Screen chip support"
select MFD_CORE select MFD_CORE
depends on I2C=y && GENERIC_HARDIRQS select REGMAP
select REGMAP_I2C select REGMAP_MMIO
select REGMAP_IRQ depends on GENERIC_HARDIRQS
help help
Say yes here to support for Maxim Semiconductor MAX8907. This is If you say yes here you get support for Texas Instruments series
a Power Management IC. This driver provides common support for of Touch Screen /ADC chips.
accessing the device; additional drivers must be enabled in order To compile this driver as a module, choose M here: the
to use the functionality of the device. module will be called ti_am335x_tscadc.
config MFD_MAX8925 config MFD_DM355EVM_MSP
bool "Maxim Semiconductor MAX8925 PMIC Support" bool "TI DaVinci DM355 EVM microcontroller"
depends on I2C=y && GENERIC_HARDIRQS depends on I2C=y && MACH_DAVINCI_DM355_EVM
select MFD_CORE
help help
Say yes here to support for Maxim Semiconductor MAX8925. This is This driver supports the MSP430 microcontroller used on these
a Power Management IC. This driver provides common support for boards. MSP430 firmware manages resets and power sequencing,
accessing the device, additional drivers must be enabled in order inputs from buttons and the IR remote, LEDs, an RTC, and more.
to use the functionality of the device.
config MFD_MAX8997 config MFD_LP8788
bool "Maxim Semiconductor MAX8997/8966 PMIC Support" bool "TI LP8788 Power Management Unit Driver"
depends on I2C=y && GENERIC_HARDIRQS depends on I2C=y && GENERIC_HARDIRQS
select MFD_CORE select MFD_CORE
select REGMAP_I2C
select IRQ_DOMAIN select IRQ_DOMAIN
help help
Say yes here to support for Maxim Semiconductor MAX8997/8966. TI LP8788 PMU supports regulators, battery charger, RTC,
This is a Power Management IC with RTC, Flash, Fuel Gauge, Haptic, ADC, backlight driver and current sinks.
MUIC controls on chip.
This driver provides common support for accessing the device;
additional drivers must be enabled in order to use the functionality
of the device.
config MFD_MAX8998 config MFD_OMAP_USB_HOST
bool "Maxim Semiconductor MAX8998/National LP3974 PMIC Support" bool "TI OMAP USBHS core and TLL driver"
depends on I2C=y && GENERIC_HARDIRQS depends on USB_EHCI_HCD_OMAP || USB_OHCI_HCD_OMAP3
select MFD_CORE default y
help help
Say yes here to support for Maxim Semiconductor MAX8998 and This is the core driver for the OAMP EHCI and OHCI drivers.
National Semiconductor LP3974. This is a Power Management IC. This MFD driver does the required setup functionalities for
This driver provides common support for accessing the device, OMAP USB Host drivers.
additional drivers must be enabled in order to use the functionality
of the device.
config MFD_SEC_CORE config MFD_PALMAS
bool "SAMSUNG Electronics PMIC Series Support" bool "TI Palmas series chips"
depends on I2C=y && GENERIC_HARDIRQS
select MFD_CORE select MFD_CORE
select REGMAP_I2C select REGMAP_I2C
select REGMAP_IRQ select REGMAP_IRQ
depends on I2C=y && GENERIC_HARDIRQS
help help
Support for the Samsung Electronics MFD series. If you say yes here you get support for the Palmas
This driver provides common support for accessing the device, series of PMIC chips from Texas Instruments.
additional drivers must be enabled in order to use the functionality
of the device
config MFD_ARIZONA config MFD_TI_SSP
select REGMAP tristate "TI Sequencer Serial Port support"
select REGMAP_IRQ depends on ARCH_DAVINCI_TNETV107X && GENERIC_HARDIRQS
select MFD_CORE select MFD_CORE
bool ---help---
Say Y here if you want support for the Sequencer Serial Port
in a Texas Instruments TNETV107X SoC.
config MFD_ARIZONA_I2C To compile this driver as a module, choose M here: the
tristate "Support Wolfson Microelectronics Arizona platform with I2C" module will be called ti-ssp.
select MFD_ARIZONA
config TPS6105X
tristate "TI TPS61050/61052 Boost Converters"
depends on I2C
select REGULATOR
select MFD_CORE
select REGULATOR_FIXED_VOLTAGE
depends on GENERIC_HARDIRQS
help
This option enables a driver for the TP61050/TPS61052
high-power "white LED driver". This boost converter is
sometimes used for other things than white LEDs, and
also contains a GPIO pin.
config TPS65010
tristate "TI TPS6501x Power Management chips"
depends on I2C && GPIOLIB
default y if MACH_OMAP_H2 || MACH_OMAP_H3 || MACH_OMAP_OSK
help
If you say yes here you get support for the TPS6501x series of
Power Management chips. These include voltage regulators,
lithium ion/polymer battery charging, and other features that
are often used in portable devices like cell phones and cameras.
This driver can also be built as a module. If so, the module
will be called tps65010.
config TPS6507X
tristate "TI TPS6507x Power Management / Touch Screen chips"
select MFD_CORE select MFD_CORE
select REGMAP_I2C
depends on I2C && GENERIC_HARDIRQS depends on I2C && GENERIC_HARDIRQS
help help
Support for the Wolfson Microelectronics Arizona platform audio SoC If you say yes here you get support for the TPS6507x series of
core functionality controlled via I2C. Power Management / Touch Screen chips. These include voltage
regulators, lithium ion/polymer battery charging, touch screen
and other features that are often used in portable devices.
This driver can also be built as a module. If so, the module
will be called tps6507x.
config MFD_ARIZONA_SPI config TPS65911_COMPARATOR
tristate "Support Wolfson Microelectronics Arizona platform with SPI" tristate
select MFD_ARIZONA
config MFD_TPS65090
bool "TI TPS65090 Power Management chips"
depends on I2C=y && GENERIC_HARDIRQS
select MFD_CORE select MFD_CORE
select REGMAP_SPI select REGMAP_I2C
depends on SPI_MASTER && GENERIC_HARDIRQS select REGMAP_IRQ
help help
Support for the Wolfson Microelectronics Arizona platform audio SoC If you say yes here you get support for the TPS65090 series of
core functionality controlled via I2C. Power Management chips.
This driver provides common support for accessing the device,
additional drivers must be enabled in order to use the
functionality of the device.
config MFD_WM5102 config MFD_TPS65217
bool "Support Wolfson Microelectronics WM5102" tristate "TI TPS65217 Power Management / White LED chips"
depends on MFD_ARIZONA depends on I2C && GENERIC_HARDIRQS
select MFD_CORE
select REGMAP_I2C
help help
Support for Wolfson Microelectronics WM5102 low power audio SoC If you say yes here you get support for the TPS65217 series of
Power Management / White LED chips.
These include voltage regulators, lithium ion/polymer battery
charger, wled and other features that are often used in portable
devices.
config MFD_WM5110 This driver can also be built as a module. If so, the module
bool "Support Wolfson Microelectronics WM5110" will be called tps65217.
depends on MFD_ARIZONA
help
Support for Wolfson Microelectronics WM5110 low power audio SoC
config MFD_WM8400 config MFD_TPS6586X
bool "Support Wolfson Microelectronics WM8400" bool "TI TPS6586x Power Management chips"
select MFD_CORE
depends on I2C=y && GENERIC_HARDIRQS depends on I2C=y && GENERIC_HARDIRQS
select MFD_CORE
select REGMAP_I2C select REGMAP_I2C
help help
Support for the Wolfson Microelecronics WM8400 PMIC and audio If you say yes here you get support for the TPS6586X series of
CODEC. This driver provides common support for accessing Power Management chips.
the device, additional drivers must be enabled in order to use This driver provides common support for accessing the device,
the functionality of the device. additional drivers must be enabled in order to use the
functionality of the device.
config MFD_WM831X This driver can also be built as a module. If so, the module
bool will be called tps6586x.
depends on GENERIC_HARDIRQS
config MFD_WM831X_I2C config MFD_TPS65910
bool "Support Wolfson Microelectronics WM831x/2x PMICs with I2C" bool "TI TPS65910 Power Management chip"
depends on I2C=y && GPIOLIB && GENERIC_HARDIRQS
select MFD_CORE select MFD_CORE
select MFD_WM831X
select REGMAP_I2C select REGMAP_I2C
select REGMAP_IRQ
select IRQ_DOMAIN select IRQ_DOMAIN
depends on I2C=y && GENERIC_HARDIRQS
help help
Support for the Wolfson Microelecronics WM831x and WM832x PMICs if you say yes here you get support for the TPS65910 series of
when controlled using I2C. This driver provides common support Power Management chips.
for accessing the device, additional drivers must be enabled in
order to use the functionality of the device.
config MFD_WM831X_SPI config MFD_TPS65912
bool "Support Wolfson Microelectronics WM831x/2x PMICs with SPI" bool "TI TPS65912 Power Management chip"
select MFD_CORE depends on GPIOLIB
select MFD_WM831X
select REGMAP_SPI
select IRQ_DOMAIN
depends on SPI_MASTER && GENERIC_HARDIRQS
help help
Support for the Wolfson Microelecronics WM831x and WM832x PMICs If you say yes here you get support for the TPS65912 series of
when controlled using SPI. This driver provides common support PM chips.
for accessing the device, additional drivers must be enabled in
order to use the functionality of the device.
config MFD_WM8350 config MFD_TPS65912_I2C
bool bool "TI TPS65912 Power Management chip with I2C"
depends on GENERIC_HARDIRQS select MFD_CORE
select MFD_TPS65912
depends on I2C=y && GPIOLIB && GENERIC_HARDIRQS
help
If you say yes here you get support for the TPS65912 series of
PM chips with I2C interface.
config MFD_WM8350_I2C config MFD_TPS65912_SPI
bool "Support Wolfson Microelectronics WM8350 with I2C" bool "TI TPS65912 Power Management chip with SPI"
select MFD_WM8350 select MFD_CORE
depends on I2C=y && GENERIC_HARDIRQS select MFD_TPS65912
depends on SPI_MASTER && GPIOLIB && GENERIC_HARDIRQS
help help
The WM8350 is an integrated audio and power management If you say yes here you get support for the TPS65912 series of
subsystem with watchdog and RTC functionality for embedded PM chips with SPI interface.
systems. This option enables core support for the WM8350 with
I2C as the control interface. Additional options must be
selected to enable support for the functionality of the chip.
config MFD_WM8994 config MFD_TPS80031
bool "Support Wolfson Microelectronics WM8994" bool "TI TPS80031/TPS80032 Power Management chips"
depends on I2C=y && GENERIC_HARDIRQS
select MFD_CORE select MFD_CORE
select REGMAP_I2C select REGMAP_I2C
select REGMAP_IRQ select REGMAP_IRQ
depends on I2C=y && GENERIC_HARDIRQS
help help
The WM8994 is a highly integrated hi-fi CODEC designed for If you say yes here you get support for the Texas Instruments
smartphone applicatiosn. As well as audio functionality it TPS80031/ TPS80032 Fully Integrated Power Management with Power
has on board GPIO and regulator functionality which is Path and Battery Charger. The device provides five configurable
supported via the relevant subsystems. This driver provides step-down converters, 11 general purpose LDOs, USB OTG Module,
core support for the WM8994, in order to use the actual ADC, RTC, 2 PWM, System Voltage Regulator/Battery Charger with
functionaltiy of the device other drivers must be enabled. Power Path from USB, 32K clock generator.
config MFD_PCF50633 config TWL4030_CORE
tristate "Support for NXP PCF50633" bool "TI TWL4030/TWL5030/TWL6030/TPS659x0 Support"
depends on I2C depends on I2C=y && GENERIC_HARDIRQS
select IRQ_DOMAIN
select REGMAP_I2C select REGMAP_I2C
help help
Say yes here if you have NXP PCF50633 chip on your board. Say yes here if you have TWL4030 / TWL6030 family chip on your board.
This core driver provides register access and IRQ handling This core driver provides register access and IRQ handling
facilities, and registers devices for the various functions facilities, and registers devices for the various functions
so that function-specific drivers can bind to them. so that function-specific drivers can bind to them.
config PCF50633_ADC These multi-function chips are found on many OMAP2 and OMAP3
tristate "Support for NXP PCF50633 ADC" boards, providing power management, RTC, GPIO, keypad, a
depends on MFD_PCF50633 high speed USB OTG transceiver, an audio codec (on most
help versions) and many other features.
Say yes here if you want to include support for ADC in the
NXP PCF50633 chip.
config PCF50633_GPIO
tristate "Support for NXP PCF50633 GPIO"
depends on MFD_PCF50633
help
Say yes here if you want to include support GPIO for pins on
the PCF50633 chip.
config MFD_MC13783
tristate
config MFD_MC13XXX config TWL4030_MADC
tristate tristate "TI TWL4030 MADC"
depends on (SPI_MASTER || I2C) && GENERIC_HARDIRQS depends on TWL4030_CORE
select MFD_CORE
select MFD_MC13783
help help
Enable support for the Freescale MC13783 and MC13892 PMICs. This driver provides support for triton TWL4030-MADC. The
This driver provides common support for accessing the device, driver supports both RT and SW conversion methods.
additional drivers must be enabled in order to use the
functionality of the device.
config MFD_MC13XXX_SPI This driver can be built as a module. If so it will be
tristate "Freescale MC13783 and MC13892 SPI interface" named twl4030-madc
depends on SPI_MASTER && GENERIC_HARDIRQS
select REGMAP_SPI
select MFD_MC13XXX
help
Select this if your MC13xxx is connected via an SPI bus.
config MFD_MC13XXX_I2C config TWL4030_POWER
tristate "Freescale MC13892 I2C interface" bool "TI TWL4030 power resources"
depends on I2C && GENERIC_HARDIRQS depends on TWL4030_CORE && ARM
select REGMAP_I2C
select MFD_MC13XXX
help help
Select this if your MC13xxx is connected via an I2C bus. Say yes here if you want to use the power resources on the
TWL4030 family chips. Most of these resources are regulators,
which have a separate driver; some are control signals, such
as clock request handshaking.
config ABX500_CORE This driver uses board-specific data to initialize the resources
bool "ST-Ericsson ABX500 Mixed Signal Circuit register functions" and load scripts controlling which resources are switched off/on
default y if ARCH_U300 || ARCH_U8500 or reset when a sleep, wakeup or warm reset event occurs.
help
Say yes here if you have the ABX500 Mixed Signal IC family
chips. This core driver expose register access functions.
Functionality specific drivers using these functions can
remain unchanged when IC changes. Binding of the functions to
actual register access is done by the IC core driver.
config AB3100_CORE config MFD_TWL4030_AUDIO
bool "ST-Ericsson AB3100 Mixed Signal Circuit core functions" bool "TI TWL4030 Audio"
depends on I2C=y && ABX500_CORE && GENERIC_HARDIRQS depends on TWL4030_CORE && GENERIC_HARDIRQS
select MFD_CORE select MFD_CORE
default y if ARCH_U300 default n
help
Select this to enable the AB3100 Mixed Signal IC core
functionality. This connects to a AB3100 on the I2C bus
and expose a number of symbols needed for dependent devices
to read and write registers and subscribe to events from
this multi-functional IC. This is needed to use other features
of the AB3100 such as battery-backed RTC, charging control,
LEDs, vibrator, system power and temperature, power management
and ALSA sound.
config AB3100_OTP
tristate "ST-Ericsson AB3100 OTP functions"
depends on AB3100_CORE
default y if AB3100_CORE
help
Select this to enable the AB3100 Mixed Signal IC OTP (one-time
programmable memory) support. This exposes a sysfs file to read
out OTP values.
config AB8500_CORE config TWL6040_CORE
bool "ST-Ericsson AB8500 Mixed Signal Power Management chip" bool "TI TWL6040 audio codec"
depends on GENERIC_HARDIRQS && ABX500_CORE && MFD_DB8500_PRCMU depends on I2C=y && GENERIC_HARDIRQS
select POWER_SUPPLY
select MFD_CORE select MFD_CORE
select IRQ_DOMAIN select REGMAP_I2C
help select REGMAP_IRQ
Select this option to enable access to AB8500 power management default n
chip. This connects to U8500 either on the SSP/SPI bus (deprecated
since hardware version v1.0) or the I2C bus via PRCMU. It also adds
the irq_chip parts for handling the Mixed Signal chip events.
This chip embeds various other multimedia funtionalities as well.
config AB8500_DEBUG
bool "Enable debug info via debugfs"
depends on AB8500_CORE && DEBUG_FS
default y if DEBUG_FS
help
Select this option if you want debug information using the debug
filesystem, debugfs.
config AB8500_GPADC
bool "AB8500 GPADC driver"
depends on AB8500_CORE && REGULATOR_AB8500
default y
help help
AB8500 GPADC driver used to convert Acc and battery/ac/usb voltage Say yes here if you want support for Texas Instruments TWL6040 audio
codec.
This driver provides common support for accessing the device,
additional drivers must be enabled in order to use the
functionality of the device (audio, vibra).
config EZX_PCAP config MENELAUS
bool "PCAP Support" bool "TI TWL92330/Menelaus PM chip"
depends on GENERIC_HARDIRQS && SPI_MASTER depends on I2C=y && ARCH_OMAP2
help help
This enables the PCAP ASIC present on EZX Phones. This is If you say yes here you get support for the Texas Instruments
needed for MMC, TouchScreen, Sound, USB, etc.. TWL92330/Menelaus Power Management chip. This include voltage
regulators, Dual slot memory card transceivers, real-time clock
and other features that are often used in portable devices like
cell phones and PDAs.
config MFD_DB8500_PRCMU config MFD_WL1273_CORE
bool "ST-Ericsson DB8500 Power Reset Control Management Unit" tristate "TI WL1273 FM radio"
depends on UX500_SOC_DB8500 depends on I2C && GENERIC_HARDIRQS
select MFD_CORE select MFD_CORE
default n
help help
Select this option to enable support for the DB8500 Power Reset This is the core driver for the TI WL1273 FM radio. This MFD
and Control Management Unit. This is basically an autonomous driver connects the radio-wl1273 V4L2 module and the wl1273
system controller running an XP70 microprocessor, which is accessed audio codec.
through a register map.
config MFD_CS5535 config MFD_LM3533
tristate "Support for CS5535 and CS5536 southbridge core functions" tristate "TI/National Semiconductor LM3533 Lighting Power chip"
depends on I2C
select MFD_CORE select MFD_CORE
depends on PCI && X86 select REGMAP_I2C
---help--- depends on GENERIC_HARDIRQS
This is the core driver for CS5535/CS5536 MFD functions. This is help
necessary for using the board's GPIO and MFGPT functionality. Say yes here to enable support for National Semiconductor / TI
LM3533 Lighting Power chips.
This driver provides common support for accessing the device;
additional drivers must be enabled in order to use the LED,
backlight or ambient-light-sensor functionality of the device.
config MFD_TIMBERDALE config MFD_TIMBERDALE
tristate "Support for the Timberdale FPGA" tristate "Timberdale FPGA"
select MFD_CORE select MFD_CORE
depends on PCI && GPIOLIB depends on PCI && GPIOLIB
---help--- ---help---
...@@ -893,54 +945,48 @@ config MFD_TIMBERDALE ...@@ -893,54 +945,48 @@ config MFD_TIMBERDALE
The timberdale FPGA can be found on the Intel Atom development board The timberdale FPGA can be found on the Intel Atom development board
for in-vehicle infontainment, called Russellville. for in-vehicle infontainment, called Russellville.
config LPC_SCH config MFD_TC3589X
tristate "Intel SCH LPC" bool "Toshiba TC35892 and variants"
depends on PCI && GENERIC_HARDIRQS depends on I2C=y && GENERIC_HARDIRQS
select MFD_CORE select MFD_CORE
help help
LPC bridge function of the Intel SCH provides support for Support for the Toshiba TC35892 and variants I/O Expander.
System Management Bus and General Purpose I/O.
config LPC_ICH This driver provides common support for accessing the device,
tristate "Intel ICH LPC" additional drivers must be enabled in order to use the
depends on PCI && GENERIC_HARDIRQS functionality of the device.
select MFD_CORE
help
The LPC bridge function of the Intel ICH provides support for
many functional units. This driver provides needed support for
other drivers to control these functions, currently GPIO and
watchdog.
config MFD_RDC321X config MFD_TMIO
tristate "Support for RDC-R321x southbridge" bool
default n
config MFD_T7L66XB
bool "Toshiba T7L66XB"
depends on ARM && HAVE_CLK && GENERIC_HARDIRQS
select MFD_CORE select MFD_CORE
depends on PCI && GENERIC_HARDIRQS select MFD_TMIO
help help
Say yes here if you want to have support for the RDC R-321x SoC Support for Toshiba Mobile IO Controller T7L66XB
southbridge which provides access to GPIOs and Watchdog using the
southbridge PCI device configuration space.
config MFD_JANZ_CMODIO config MFD_TC6387XB
tristate "Support for Janz CMOD-IO PCI MODULbus Carrier Board" bool "Toshiba TC6387XB"
depends on ARM && HAVE_CLK
select MFD_CORE select MFD_CORE
depends on PCI && GENERIC_HARDIRQS select MFD_TMIO
help help
This is the core driver for the Janz CMOD-IO PCI MODULbus Support for Toshiba Mobile IO Controller TC6387XB
carrier board. This device is a PCI to MODULbus bridge which may
host many different types of MODULbus daughterboards, including
CAN and GPIO controllers.
config MFD_JZ4740_ADC config MFD_TC6393XB
bool "Support for the JZ4740 SoC ADC core" bool "Toshiba TC6393XB"
depends on ARM && HAVE_CLK
select GPIOLIB
select MFD_CORE select MFD_CORE
select GENERIC_IRQ_CHIP select MFD_TMIO
depends on MACH_JZ4740
help help
Say yes here if you want support for the ADC unit in the JZ4740 SoC. Support for Toshiba Mobile IO Controller TC6393XB
This driver is necessary for jz4740-battery and jz4740-hwmon driver.
config MFD_VX855 config MFD_VX855
tristate "Support for VIA VX855/VX875 integrated south bridge" tristate "VIA VX855/VX875 integrated south bridge"
depends on PCI && GENERIC_HARDIRQS depends on PCI && GENERIC_HARDIRQS
select MFD_CORE select MFD_CORE
help help
...@@ -948,156 +994,113 @@ config MFD_VX855 ...@@ -948,156 +994,113 @@ config MFD_VX855
VIA VX855/VX875 south bridge. You will need to enable the vx855_spi VIA VX855/VX875 south bridge. You will need to enable the vx855_spi
and/or vx855_gpio drivers for this to do anything useful. and/or vx855_gpio drivers for this to do anything useful.
config MFD_WL1273_CORE config MFD_ARIZONA
tristate "Support for TI WL1273 FM radio." select REGMAP
depends on I2C && GENERIC_HARDIRQS select REGMAP_IRQ
select MFD_CORE select MFD_CORE
default n bool
help
This is the core driver for the TI WL1273 FM radio. This MFD
driver connects the radio-wl1273 V4L2 module and the wl1273
audio codec.
config MFD_OMAP_USB_HOST
bool "Support OMAP USBHS core and TLL driver"
depends on USB_EHCI_HCD_OMAP || USB_OHCI_HCD_OMAP3
default y
help
This is the core driver for the OAMP EHCI and OHCI drivers.
This MFD driver does the required setup functionalities for
OMAP USB Host drivers.
config MFD_PM8XXX
tristate
config MFD_PM8921_CORE config MFD_ARIZONA_I2C
tristate "Qualcomm PM8921 PMIC chip" tristate "Wolfson Microelectronics Arizona platform with I2C"
depends on MSM_SSBI select MFD_ARIZONA
select MFD_CORE select MFD_CORE
select MFD_PM8XXX select REGMAP_I2C
help depends on I2C && GENERIC_HARDIRQS
If you say yes to this option, support will be included for the
built-in PM8921 PMIC chip.
This is required if your board has a PM8921 and uses its features,
such as: MPPs, GPIOs, regulators, interrupts, and PWM.
Say M here if you want to include support for PM8921 chip as a module.
This will build a module called "pm8921-core".
config MFD_PM8XXX_IRQ
bool "Support for Qualcomm PM8xxx IRQ features"
depends on MFD_PM8XXX
default y if MFD_PM8XXX
help help
This is the IRQ driver for Qualcomm PM 8xxx PMIC chips. Support for the Wolfson Microelectronics Arizona platform audio SoC
core functionality controlled via I2C.
This is required to use certain other PM 8xxx features, such as GPIO
and MPP.
config TPS65911_COMPARATOR
tristate
config MFD_TPS65090 config MFD_ARIZONA_SPI
bool "TPS65090 Power Management chips" tristate "Wolfson Microelectronics Arizona platform with SPI"
depends on I2C=y && GENERIC_HARDIRQS select MFD_ARIZONA
select MFD_CORE select MFD_CORE
select REGMAP_I2C select REGMAP_SPI
select REGMAP_IRQ depends on SPI_MASTER && GENERIC_HARDIRQS
help help
If you say yes here you get support for the TPS65090 series of Support for the Wolfson Microelectronics Arizona platform audio SoC
Power Management chips. core functionality controlled via I2C.
This driver provides common support for accessing the device,
additional drivers must be enabled in order to use the
functionality of the device.
config MFD_AAT2870_CORE config MFD_WM5102
bool "Support for the AnalogicTech AAT2870" bool "Wolfson Microelectronics WM5102"
select MFD_CORE depends on MFD_ARIZONA
depends on I2C=y && GPIOLIB && GENERIC_HARDIRQS
help help
If you say yes here you get support for the AAT2870. Support for Wolfson Microelectronics WM5102 low power audio SoC
This driver provides common support for accessing the device,
additional drivers must be enabled in order to use the
functionality of the device.
config MFD_INTEL_MSIC config MFD_WM5110
bool "Support for Intel MSIC" bool "Wolfson Microelectronics WM5110"
depends on INTEL_SCU_IPC depends on MFD_ARIZONA
select MFD_CORE
help help
Select this option to enable access to Intel MSIC (Avatele Support for Wolfson Microelectronics WM5110 low power audio SoC
Passage) chip. This chip embeds audio, battery, GPIO, etc.
devices used in Intel Medfield platforms.
config MFD_RC5T583 config MFD_WM8400
bool "Ricoh RC5T583 Power Management system device" bool "Wolfson Microelectronics WM8400"
depends on I2C=y && GENERIC_HARDIRQS
select MFD_CORE select MFD_CORE
depends on I2C=y && GENERIC_HARDIRQS
select REGMAP_I2C select REGMAP_I2C
help help
Select this option to get support for the RICOH583 Power Support for the Wolfson Microelecronics WM8400 PMIC and audio
Management system device. CODEC. This driver provides common support for accessing
This driver provides common support for accessing the device the device, additional drivers must be enabled in order to use
through i2c interface. The device supports multiple sub-devices the functionality of the device.
like GPIO, interrupts, RTC, LDO and DCDC regulators, onkey.
Additional drivers must be enabled in order to use the
different functionality of the device.
config MFD_STA2X11
bool "STA2X11 multi function device support"
depends on STA2X11 && GENERIC_HARDIRQS
select MFD_CORE
select REGMAP_MMIO
config MFD_SYSCON config MFD_WM831X
bool "System Controller Register R/W Based on Regmap" bool
select REGMAP_MMIO depends on GENERIC_HARDIRQS
help
Select this option to enable accessing system control registers
via regmap.
config MFD_PALMAS config MFD_WM831X_I2C
bool "Support for the TI Palmas series chips" bool "Wolfson Microelectronics WM831x/2x PMICs with I2C"
select MFD_CORE select MFD_CORE
select MFD_WM831X
select REGMAP_I2C select REGMAP_I2C
select REGMAP_IRQ select IRQ_DOMAIN
depends on I2C=y && GENERIC_HARDIRQS depends on I2C=y && GENERIC_HARDIRQS
help help
If you say yes here you get support for the Palmas Support for the Wolfson Microelecronics WM831x and WM832x PMICs
series of PMIC chips from Texas Instruments. when controlled using I2C. This driver provides common support
for accessing the device, additional drivers must be enabled in
order to use the functionality of the device.
config MFD_VIPERBOARD config MFD_WM831X_SPI
tristate "Support for Nano River Technologies Viperboard" bool "Wolfson Microelectronics WM831x/2x PMICs with SPI"
select MFD_CORE select MFD_CORE
depends on USB && GENERIC_HARDIRQS select MFD_WM831X
default n select REGMAP_SPI
select IRQ_DOMAIN
depends on SPI_MASTER && GENERIC_HARDIRQS
help help
Say yes here if you want support for Nano River Technologies Support for the Wolfson Microelecronics WM831x and WM832x PMICs
Viperboard. when controlled using SPI. This driver provides common support
There are mfd cell drivers available for i2c master, adc and for accessing the device, additional drivers must be enabled in
both gpios found on the board. The spi part does not yet order to use the functionality of the device.
have a driver.
You need to select the mfd cell drivers separately.
The drivers do not support all features the board exposes.
config MFD_RETU config MFD_WM8350
tristate "Support for Retu multi-function device" bool
select MFD_CORE depends on GENERIC_HARDIRQS
depends on I2C && GENERIC_HARDIRQS
select REGMAP_IRQ config MFD_WM8350_I2C
bool "Wolfson Microelectronics WM8350 with I2C"
select MFD_WM8350
depends on I2C=y && GENERIC_HARDIRQS
help help
Retu is a multi-function device found on Nokia Internet Tablets The WM8350 is an integrated audio and power management
(770, N800 and N810). subsystem with watchdog and RTC functionality for embedded
systems. This option enables core support for the WM8350 with
I2C as the control interface. Additional options must be
selected to enable support for the functionality of the chip.
config MFD_AS3711 config MFD_WM8994
bool "Support for AS3711" bool "Wolfson Microelectronics WM8994"
select MFD_CORE select MFD_CORE
select REGMAP_I2C select REGMAP_I2C
select REGMAP_IRQ select REGMAP_IRQ
depends on I2C=y && GENERIC_HARDIRQS depends on I2C=y && GENERIC_HARDIRQS
help help
Support for the AS3711 PMIC from AMS The WM8994 is a highly integrated hi-fi CODEC designed for
smartphone applicatiosn. As well as audio functionality it
has on board GPIO and regulator functionality which is
supported via the relevant subsystems. This driver provides
core support for the WM8994, in order to use the actual
functionaltiy of the device other drivers must be enabled.
endmenu endmenu
endif endif
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7