Commit abbd3f8e authored by Ben Skeggs's avatar Ben Skeggs

drm/nv04/disp: handle dual-link spwg panels without needing quirks

Signed-off-by: default avatarBen Skeggs <bskeggs@redhat.com>
parent d4c2c99b
...@@ -4304,18 +4304,6 @@ int nouveau_bios_parse_lvds_table(struct drm_device *dev, int pxclk, bool *dl, b ...@@ -4304,18 +4304,6 @@ int nouveau_bios_parse_lvds_table(struct drm_device *dev, int pxclk, bool *dl, b
break; break;
} }
/* Dell Latitude D620 reports a too-high value for the dual-link
* transition freq, causing us to program the panel incorrectly.
*
* It doesn't appear the VBIOS actually uses its transition freq
* (90000kHz), instead it uses the "Number of LVDS channels" field
* out of the panel ID structure (http://www.spwg.org/).
*
* For the moment, a quirk will do :)
*/
if (nv_match_device(dev, 0x01d7, 0x1028, 0x01c2))
bios->fp.duallink_transition_clk = 80000;
/* set dual_link flag for EDID case */ /* set dual_link flag for EDID case */
if (pxclk && (chip_version < 0x25 || chip_version > 0x28)) if (pxclk && (chip_version < 0x25 || chip_version > 0x28))
bios->fp.dual_link = (pxclk >= bios->fp.duallink_transition_clk); bios->fp.dual_link = (pxclk >= bios->fp.duallink_transition_clk);
......
...@@ -341,10 +341,15 @@ static void nv04_dfp_mode_set(struct drm_encoder *encoder, ...@@ -341,10 +341,15 @@ static void nv04_dfp_mode_set(struct drm_encoder *encoder,
output_mode->clock > 165000) output_mode->clock > 165000)
regp->fp_control |= (2 << 24); regp->fp_control |= (2 << 24);
if (nv_encoder->dcb->type == OUTPUT_LVDS) { if (nv_encoder->dcb->type == OUTPUT_LVDS) {
bool duallink, dummy; bool duallink = false, dummy;
if (nv_connector->edid &&
nv_connector->type == DCB_CONNECTOR_LVDS_SPWG) {
duallink = (((u8 *)nv_connector->edid)[121] == 2);
} else {
nouveau_bios_parse_lvds_table(dev, output_mode->clock, nouveau_bios_parse_lvds_table(dev, output_mode->clock,
&duallink, &dummy); &duallink, &dummy);
}
if (duallink) if (duallink)
regp->fp_control |= (8 << 28); regp->fp_control |= (8 << 28);
} else } else
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment