Commit abc9d91a authored by Krzysztof Hałasa's avatar Krzysztof Hałasa

WAN: convert HD64572-based drivers to NAPI.

Signed-off-by: default avatarKrzysztof Hałasa <khc@pm.waw.pl>
parent 30224392
/*
* Hitachi (now Renesas) SCA-II HD64572 driver for Linux
*
* Copyright (C) 1998-2003 Krzysztof Halasa <khc@pm.waw.pl>
* Copyright (C) 1998-2008 Krzysztof Halasa <khc@pm.waw.pl>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of version 2 of the GNU General Public License
......@@ -45,6 +45,8 @@
#include <asm/uaccess.h>
#include "hd64572.h"
#define NAPI_WEIGHT 16
#define get_msci(port) (phy_node(port) ? MSCI1_OFFSET : MSCI0_OFFSET)
#define get_dmac_rx(port) (phy_node(port) ? DMAC1RX_OFFSET : DMAC0RX_OFFSET)
#define get_dmac_tx(port) (phy_node(port) ? DMAC1TX_OFFSET : DMAC0TX_OFFSET)
......@@ -53,6 +55,7 @@
#define SCA_INTR_DMAC_RX(node) (node ? 0x20 : 0x02)
#define SCA_INTR_DMAC_TX(node) (node ? 0x40 : 0x04)
static int sca_poll(struct napi_struct *napi, int budget);
static inline struct net_device *port_to_dev(port_t *port)
{
......@@ -86,6 +89,20 @@ static inline port_t* dev_to_port(struct net_device *dev)
return dev_to_hdlc(dev)->priv;
}
static inline void enable_intr(port_t *port)
{
/* DMA & MSCI IRQ enable */
/* IR0_TXINT | IR0_RXINTA | IR0_DMIB* | IR0_DMIA* */
sca_outl(sca_inl(IER0, port->card) |
(phy_node(port) ? 0x0A006600 : 0x000A0066), IER0, port->card);
}
static inline void disable_intr(port_t *port)
{
sca_outl(sca_inl(IER0, port->card) &
(phy_node(port) ? 0x00FF00FF : 0xFF00FF00), IER0, port->card);
}
static inline u16 next_desc(port_t *port, u16 desc, int transmit)
{
return (desc + 1) % (transmit ? port_to_card(port)->tx_ring_buffers
......@@ -206,6 +223,7 @@ static void sca_init_port(port_t *port)
}
}
sca_set_carrier(port);
netif_napi_add(port_to_dev(port), &port->napi, sca_poll, NAPI_WEIGHT);
}
......@@ -256,17 +274,18 @@ static inline void sca_rx(card_t *card, port_t *port, pkt_desc __iomem *desc,
dev->stats.rx_packets++;
dev->stats.rx_bytes += skb->len;
skb->protocol = hdlc_type_trans(skb, dev);
netif_rx(skb);
netif_receive_skb(skb);
}
/* Receive DMA interrupt service */
static inline void sca_rx_intr(port_t *port)
/* Receive DMA service */
static inline int sca_rx_done(port_t *port, int budget)
{
struct net_device *dev = port_to_dev(port);
u16 dmac = get_dmac_rx(port);
card_t *card = port_to_card(port);
u8 stat = sca_in(DSR_RX(phy_node(port)), card); /* read DMA Status */
int received = 0;
/* Reset DSR status bits */
sca_out((stat & (DSR_EOT | DSR_EOM | DSR_BOF | DSR_COF)) | DSR_DWE,
......@@ -276,7 +295,7 @@ static inline void sca_rx_intr(port_t *port)
/* Dropped one or more frames */
dev->stats.rx_over_errors++;
while (1) {
while (received < budget) {
u32 desc_off = desc_offset(port, port->rxin, 0);
pkt_desc __iomem *desc;
u32 cda = sca_inl(dmac + CDAL, card);
......@@ -299,8 +318,10 @@ static inline void sca_rx_intr(port_t *port)
dev->stats.rx_crc_errors++;
if (stat & ST_RX_EOM)
port->rxpart = 0; /* received last fragment */
} else
} else {
sca_rx(card, port, desc, port->rxin);
received++;
}
/* Set new error descriptor address */
sca_outl(desc_off, dmac + EDAL, card);
......@@ -309,11 +330,12 @@ static inline void sca_rx_intr(port_t *port)
/* make sure RX DMA is enabled */
sca_out(DSR_DE, DSR_RX(phy_node(port)), card);
return received;
}
/* Transmit DMA interrupt service */
static inline void sca_tx_intr(port_t *port)
/* Transmit DMA service */
static inline void sca_tx_done(port_t *port)
{
struct net_device *dev = port_to_dev(port);
u16 dmac = get_dmac_tx(port);
......@@ -348,27 +370,43 @@ static inline void sca_tx_intr(port_t *port)
}
static int sca_poll(struct napi_struct *napi, int budget)
{
port_t *port = container_of(napi, port_t, napi);
u8 stat = sca_intr_status(port->card);
int received = 0;
if (stat & SCA_INTR_MSCI(port->phy_node))
sca_msci_intr(port);
if (stat & SCA_INTR_DMAC_TX(port->phy_node))
sca_tx_done(port);
if (stat & SCA_INTR_DMAC_RX(port->phy_node))
received = sca_rx_done(port, budget);
if (received < budget) {
netif_rx_complete(port->dev, napi);
enable_intr(port);
}
return received;
}
static irqreturn_t sca_intr(int irq, void* dev_id)
{
card_t *card = dev_id;
int i;
u8 stat;
u8 stat = sca_intr_status(card);
int handled = 0;
while((stat = sca_intr_status(card)) != 0) {
handled = 1;
for (i = 0; i < 2; i++) {
port_t *port = get_port(card, i);
if (port) {
if (stat & SCA_INTR_MSCI(i))
sca_msci_intr(port);
if (stat & SCA_INTR_DMAC_RX(i))
sca_rx_intr(port);
if (stat & SCA_INTR_DMAC_TX(i))
sca_tx_intr(port);
}
if (port && (stat & (SCA_INTR_MSCI(i) | SCA_INTR_DMAC_RX(i) |
SCA_INTR_DMAC_TX(i)))) {
handled = 1;
disable_intr(port);
netif_rx_schedule(port->dev, &port->napi);
}
}
......@@ -470,18 +508,12 @@ static void sca_open(struct net_device *dev)
sca_out(0x3F, msci + TNR1, card); /* +1=TX DMA deactivation condition*/
/* We're using the following interrupts:
- TXINT (DMAC completed all transmisions, underrun or DCD change)
- TXINT (DMAC completed all transmissions, underrun or DCD change)
- all DMA interrupts
*/
sca_set_carrier(port);
/* MSCI TXINT and RXINTA interrupt enable */
sca_outl(IE0_TXINT | IE0_RXINTA | IE0_UDRN | IE0_CDCD, msci + IE0,
card);
/* DMA & MSCI IRQ enable */
sca_outl(sca_inl(IER0, card) |
(phy_node(port) ? 0x0A006600 : 0x000A0066), IER0, card);
sca_out(port->tmc, msci + TMCR, card);
sca_out(port->tmc, msci + TMCT, card);
......@@ -490,6 +522,9 @@ static void sca_open(struct net_device *dev)
sca_out(CMD_TX_ENABLE, msci + CMD, card);
sca_out(CMD_RX_ENABLE, msci + CMD, card);
sca_set_carrier(port);
enable_intr(port);
napi_enable(&port->napi);
netif_start_queue(dev);
}
......@@ -497,14 +532,11 @@ static void sca_open(struct net_device *dev)
static void sca_close(struct net_device *dev)
{
port_t *port = dev_to_port(dev);
card_t* card = port_to_card(port);
/* reset channel */
sca_out(CMD_RESET, get_msci(port) + CMD, port_to_card(port));
/* disable DMA & MSCI IRQ */
sca_outl(sca_inl(IER0, card) &
(phy_node(port) ? 0x00FF00FF : 0xFF00FF00), IER0, card);
disable_intr(port);
napi_disable(&port->napi);
netif_stop_queue(dev);
}
......
......@@ -78,6 +78,7 @@ typedef struct {
typedef struct port_s {
struct napi_struct napi;
struct net_device *dev;
struct card_s *card;
spinlock_t lock; /* TX lock */
......@@ -481,6 +482,7 @@ static int __devinit pc300_pci_init_one(struct pci_dev *pdev,
else
port->iface = IF_IFACE_V35;
sca_init_port(port);
if (register_hdlc_device(dev)) {
printk(KERN_ERR "pc300: unable to register hdlc "
"device\n");
......@@ -488,7 +490,6 @@ static int __devinit pc300_pci_init_one(struct pci_dev *pdev,
pc300_pci_remove_one(pdev);
return -ENOBUFS;
}
sca_init_port(port); /* Set up SCA memory */
printk(KERN_INFO "%s: PC300 node %d\n",
dev->name, port->phy_node);
......
......@@ -65,6 +65,7 @@ typedef struct {
typedef struct port_s {
struct napi_struct napi;
struct net_device *dev;
struct card_s *card;
spinlock_t lock; /* TX lock */
......@@ -423,6 +424,7 @@ static int __devinit pci200_pci_init_one(struct pci_dev *pdev,
hdlc->xmit = sca_xmit;
port->settings.clock_type = CLOCK_EXT;
port->card = card;
sca_init_port(port);
if (register_hdlc_device(dev)) {
printk(KERN_ERR "pci200syn: unable to register hdlc "
"device\n");
......@@ -430,7 +432,6 @@ static int __devinit pci200_pci_init_one(struct pci_dev *pdev,
pci200_pci_remove_one(pdev);
return -ENOBUFS;
}
sca_init_port(port); /* Set up SCA memory */
printk(KERN_INFO "%s: PCI200SYN node %d\n",
dev->name, port->phy_node);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment