Commit acceba59 authored by Linus Torvalds's avatar Linus Torvalds

Merge branch 'i2c/for-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux

Pull i2c updates from Wolfram Sang:
 "Features:

   - new drivers: Renesas EMEV2, register based MUX, NXP LPC2xxx
   - core: scans DT and assigns wakeup interrupts.  no driver changes needed.
   - core: some refcouting issues fixed and better API for that
   - core: new helper function for best effort block read emulation
   - slave framework: proper DT bindings and userspace instantiation
   - some bigger work for xiic, pxa, omap drivers

  .. and quite a number of smaller driver fixes, cleanups, improvements"

* 'i2c/for-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (65 commits)
  i2c: mux: reg Change ioread endianness for readback
  i2c: mux: reg: fix compilation warnings
  i2c: mux: reg: simplify register size checking
  i2c: muxes: fix leaked i2c adapter device node references
  i2c: allow specifying separate wakeup interrupt in device tree
  of/irq: export of_get_irq_byname()
  i2c: xgene-slimpro: dma_mapping_error() doesn't return an error code
  i2c: Replace I2C_CROS_EC_TUNNEL dependency
  eeprom: at24: use i2c_smbus_read_i2c_block_data_or_emulated
  i2c: core: Add support for best effort block read emulation
  i2c: lpc2k: add driver
  i2c: mux: Add register-based mux i2c-mux-reg
  i2c: dt: describe generic bindings
  i2c: slave: print warning if slave flag not set
  i2c: support 10 bit and slave addresses in sysfs 'new_device'
  i2c: take address space into account when checking for used addresses
  i2c: apply DT flags when probing
  i2c: make address check indpendent from client struct
  i2c: rename address check functions
  i2c: apply address offset for slaves, too
  ...
parents c1917615 5a73882f
......@@ -2,7 +2,11 @@ Binding for the Cadence I2C controller
Required properties:
- reg: Physical base address and size of the controller's register area.
- compatible: Compatibility string. Must be 'cdns,i2c-r1p10'.
- compatible: Should contain one of:
* "cdns,i2c-r1p10"
Note: Use this when cadence i2c controller version 1.0 is used.
* "cdns,i2c-r1p14"
Note: Use this when cadence i2c controller version 1.4 is used.
- clocks: Input clock specifier. Refer to common clock bindings.
- interrupts: Interrupt specifier. Refer to interrupt bindings.
- #address-cells: Should be 1.
......
Device tree configuration for Renesas EMEV2 IIC controller
Required properties:
- compatible : "renesas,iic-emev2"
- reg : address start and address range size of device
- interrupts : specifier for the IIC controller interrupt
- clocks : phandle to the IP core SCLK
- clock-names : must be "sclk"
- #address-cells : should be <1>
- #size-cells : should be <0>
Example:
iic0: i2c@e0070000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "renesas,iic-emev2";
reg = <0xe0070000 0x28>;
interrupts = <0 32 IRQ_TYPE_EDGE_RISING>;
clocks = <&iic0_sclk>;
clock-names = "sclk";
};
NXP I2C controller for LPC2xxx/178x/18xx/43xx
Required properties:
- compatible: must be "nxp,lpc1788-i2c"
- reg: physical address and length of the device registers
- interrupts: a single interrupt specifier
- clocks: clock for the device
- #address-cells: should be <1>
- #size-cells: should be <0>
Optional properties:
- clock-frequency: the desired I2C bus clock frequency in Hz; in
absence of this property the default value is used (100 kHz).
Example:
i2c0: i2c@400a1000 {
compatible = "nxp,lpc1788-i2c";
reg = <0x400a1000 0x1000>;
interrupts = <18>;
clocks = <&ccu1 CLK_APB1_I2C0>;
#address-cells = <1>;
#size-cells = <0>;
};
&i2c0 {
clock-frequency = <400000>;
lm75@48 {
compatible = "nxp,lm75";
reg = <0x48>;
};
};
Register-based I2C Bus Mux
This binding describes an I2C bus multiplexer that uses a single register
to route the I2C signals.
Required properties:
- compatible: i2c-mux-reg
- i2c-parent: The phandle of the I2C bus that this multiplexer's master-side
port is connected to.
* Standard I2C mux properties. See mux.txt in this directory.
* I2C child bus nodes. See mux.txt in this directory.
Optional properties:
- reg: this pair of <offset size> specifies the register to control the mux.
The <offset size> depends on its parent node. It can be any memory-mapped
address. The size must be either 1, 2, or 4 bytes. If reg is omitted, the
resource of this device will be used.
- little-endian: The existence indicates the register is in little endian.
- big-endian: The existence indicates the register is in big endian.
If both little-endian and big-endian are omitted, the endianness of the
CPU will be used.
- write-only: The existence indicates the register is write-only.
- idle-state: value to set the muxer to when idle. When no value is
given, it defaults to the last value used.
Whenever an access is made to a device on a child bus, the value set
in the revelant node's reg property will be output to the register.
If an idle state is defined, using the idle-state (optional) property,
whenever an access is not being made to a device on a child bus, the
register will be set according to the idle value.
If an idle state is not defined, the most recently used value will be
left programmed into the register.
Example of a mux on PCIe card, the host is a powerpc SoC (big endian):
i2c-mux {
/* the <offset size> depends on the address translation
* of the parent device. If omitted, device resource
* will be used instead. The size is to determine
* whether iowrite32, iowrite16, or iowrite8 will be used.
*/
reg = <0x6028 0x4>;
little-endian; /* little endian register on PCIe */
compatible = "i2c-mux-reg";
#address-cells = <1>;
#size-cells = <0>;
i2c-parent = <&i2c1>;
i2c@0 {
reg = <0>;
#address-cells = <1>;
#size-cells = <0>;
si5338: clock-generator@70 {
compatible = "silabs,si5338";
reg = <0x70>;
/* other stuff */
};
};
i2c@1 {
/* data is written using iowrite32 */
reg = <1>;
#address-cells = <1>;
#size-cells = <0>;
si5338: clock-generator@70 {
compatible = "silabs,si5338";
reg = <0x70>;
/* other stuff */
};
};
};
Generic device tree bindings for I2C busses
===========================================
This document describes generic bindings which can be used to describe I2C
busses in a device tree.
Required properties
-------------------
- #address-cells - should be <1>. Read more about addresses below.
- #size-cells - should be <0>.
- compatible - name of I2C bus controller following generic names
recommended practice.
For other required properties e.g. to describe register sets,
clocks, etc. check the binding documentation of the specific driver.
The cells properties above define that an address of children of an I2C bus
are described by a single value. This is usually a 7 bit address. However,
flags can be attached to the address. I2C_TEN_BIT_ADDRESS is used to mark a 10
bit address. It is needed to avoid the ambiguity between e.g. a 7 bit address
of 0x50 and a 10 bit address of 0x050 which, in theory, can be on the same bus.
Another flag is I2C_OWN_SLAVE_ADDRESS to mark addresses on which we listen to
be devices ourselves.
Optional properties
-------------------
These properties may not be supported by all drivers. However, if a driver
wants to support one of the below features, it should adapt the bindings below.
- clock-frequency - frequency of bus clock in Hz.
- wakeup-source - device can be used as a wakeup source.
- interrupts - interrupts used by the device.
- interrupt-names - "irq" and "wakeup" names are recognized by I2C core,
other names are left to individual drivers.
Binding may contain optional "interrupts" property, describing interrupts
used by the device. I2C core will assign "irq" interrupt (or the very first
interrupt if not using interrupt names) as primary interrupt for the slave.
Also, if device is marked as a wakeup source, I2C core will set up "wakeup"
interrupt for the device. If "wakeup" interrupt name is not present in the
binding, then primary interrupt will be used as wakeup interrupt.
......@@ -95,6 +95,8 @@ stm,m41t00 Serial Access TIMEKEEPER
stm,m41t62 Serial real-time clock (RTC) with alarm
stm,m41t80 M41T80 - SERIAL ACCESS RTC WITH ALARMS
taos,tsl2550 Ambient Light Sensor with SMBUS/Two Wire Serial Interface
ti,ads7828 8-Channels, 12-bit ADC
ti,ads7830 8-Channels, 8-bit ADC
ti,tsc2003 I2C Touch-Screen Controller
ti,tmp102 Low Power Digital Temperature Sensor with SMBUS/Two Wire Serial Interface
ti,tmp103 Low Power Digital Temperature Sensor with SMBUS/Two Wire Serial Interface
......
......@@ -20,6 +20,7 @@ It currently supports the following devices:
* (type=5) Analog Devices evaluation boards: ADM1025, ADM1030, ADM1031
* (type=6) Barco LPT->DVI (K5800236) adapter
* (type=7) One For All JP1 parallel port adapter
* (type=8) VCT-jig
These devices use different pinout configurations, so you have to tell
the driver what you have, using the type module parameter. There is no
......
......@@ -31,10 +31,13 @@ User manual
===========
I2C slave backends behave like standard I2C clients. So, you can instantiate
them as described in the document 'instantiating-devices'. A quick example for
instantiating the slave-eeprom driver from userspace at address 0x64 on bus 1:
them as described in the document 'instantiating-devices'. The only difference
is that i2c slave backends have their own address space. So, you have to add
0x1000 to the address you would originally request. An example for
instantiating the slave-eeprom driver from userspace at the 7 bit address 0x64
on bus 1:
# echo slave-24c02 0x64 > /sys/bus/i2c/devices/i2c-1/new_device
# echo slave-24c02 0x1064 > /sys/bus/i2c/devices/i2c-1/new_device
Each backend should come with separate documentation to describe its specific
behaviour and setup.
......
......@@ -2,6 +2,10 @@ The I2C protocol knows about two kinds of device addresses: normal 7 bit
addresses, and an extended set of 10 bit addresses. The sets of addresses
do not intersect: the 7 bit address 0x10 is not the same as the 10 bit
address 0x10 (though a single device could respond to both of them).
To avoid ambiguity, the user sees 10 bit addresses mapped to a different
address space, namely 0xa000-0xa3ff. The leading 0xa (= 10) represents the
10 bit mode. This is used for creating device names in sysfs. It is also
needed when instantiating 10 bit devices via the new_device file in sysfs.
I2C messages to and from 10-bit address devices have a different format.
See the I2C specification for the details.
......
......@@ -28,6 +28,8 @@
#define USIBU1_RSTCTRL 0x0ac
#define USIBU2_RSTCTRL 0x0b0
#define USIBU3_RSTCTRL 0x0b4
#define IIC0_RSTCTRL 0x0dc
#define IIC1_RSTCTRL 0x0e0
#define STI_RSTCTRL 0x124
#define STI_CLKSEL 0x688
......@@ -66,6 +68,10 @@ static void __init emev2_smu_init(void)
emev2_smu_write(2, USIBU1_RSTCTRL);
emev2_smu_write(2, USIBU2_RSTCTRL);
emev2_smu_write(2, USIBU3_RSTCTRL);
/* deassert reset for IIC0->IIC1 */
emev2_smu_write(1, IIC0_RSTCTRL);
emev2_smu_write(1, IIC1_RSTCTRL);
}
static void __init emev2_smu_clkdiv_init(struct device_node *np)
......
......@@ -526,6 +526,13 @@ config I2C_EG20T
ML7213/ML7223/ML7831 is companion chip for Intel Atom E6xx series.
ML7213/ML7223/ML7831 is completely compatible for Intel EG20T PCH.
config I2C_EMEV2
tristate "EMMA Mobile series I2C adapter"
depends on HAVE_CLK
help
If you say yes to this option, support will be included for the
I2C interface on the Renesas Electronics EM/EV family of processors.
config I2C_EXYNOS5
tristate "Exynos5 high-speed I2C driver"
depends on ARCH_EXYNOS && OF
......@@ -612,6 +619,16 @@ config I2C_KEMPLD
This driver can also be built as a module. If so, the module
will be called i2c-kempld.
config I2C_LPC2K
tristate "I2C bus support for NXP LPC2K/LPC178x/18xx/43xx"
depends on OF && (ARCH_LPC18XX || COMPILE_TEST)
help
This driver supports the I2C interface found several NXP
devices including LPC2xxx, LPC178x/7x and LPC18xx/43xx.
This driver can also be built as a module. If so, the module
will be called i2c-lpc2k.
config I2C_MESON
tristate "Amlogic Meson I2C controller"
depends on ARCH_MESON
......@@ -1123,7 +1140,7 @@ config I2C_SIBYTE
config I2C_CROS_EC_TUNNEL
tristate "ChromeOS EC tunnel I2C bus"
depends on CROS_EC_PROTO
depends on MFD_CROS_EC
help
If you say yes here you get an I2C bus that will tunnel i2c commands
through to the other side of the ChromeOS EC to the i2c bus
......
......@@ -48,6 +48,7 @@ i2c-designware-pci-objs := i2c-designware-pcidrv.o
obj-$(CONFIG_I2C_DIGICOLOR) += i2c-digicolor.o
obj-$(CONFIG_I2C_EFM32) += i2c-efm32.o
obj-$(CONFIG_I2C_EG20T) += i2c-eg20t.o
obj-$(CONFIG_I2C_EMEV2) += i2c-emev2.o
obj-$(CONFIG_I2C_EXYNOS5) += i2c-exynos5.o
obj-$(CONFIG_I2C_GPIO) += i2c-gpio.o
obj-$(CONFIG_I2C_HIGHLANDER) += i2c-highlander.o
......@@ -58,6 +59,7 @@ obj-$(CONFIG_I2C_IMX) += i2c-imx.o
obj-$(CONFIG_I2C_IOP3XX) += i2c-iop3xx.o
obj-$(CONFIG_I2C_JZ4780) += i2c-jz4780.o
obj-$(CONFIG_I2C_KEMPLD) += i2c-kempld.o
obj-$(CONFIG_I2C_LPC2K) += i2c-lpc2k.o
obj-$(CONFIG_I2C_MESON) += i2c-meson.o
obj-$(CONFIG_I2C_MPC) += i2c-mpc.o
obj-$(CONFIG_I2C_MT65XX) += i2c-mt65xx.o
......
......@@ -17,6 +17,7 @@
#include <linux/io.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/of.h>
/* Register offsets for the I2C device. */
#define CDNS_I2C_CR_OFFSET 0x00 /* Control Register, RW */
......@@ -113,6 +114,8 @@
#define CDNS_I2C_TIMEOUT_MAX 0xFF
#define CDNS_I2C_BROKEN_HOLD_BIT BIT(0)
#define cdns_i2c_readreg(offset) readl_relaxed(id->membase + offset)
#define cdns_i2c_writereg(val, offset) writel_relaxed(val, id->membase + offset)
......@@ -135,6 +138,7 @@
* @bus_hold_flag: Flag used in repeated start for clearing HOLD bit
* @clk: Pointer to struct clk
* @clk_rate_change_nb: Notifier block for clock rate changes
* @quirks: flag for broken hold bit usage in r1p10
*/
struct cdns_i2c {
void __iomem *membase;
......@@ -154,6 +158,11 @@ struct cdns_i2c {
unsigned int bus_hold_flag;
struct clk *clk;
struct notifier_block clk_rate_change_nb;
u32 quirks;
};
struct cdns_platform_data {
u32 quirks;
};
#define to_cdns_i2c(_nb) container_of(_nb, struct cdns_i2c, \
......@@ -172,6 +181,12 @@ static void cdns_i2c_clear_bus_hold(struct cdns_i2c *id)
cdns_i2c_writereg(reg & ~CDNS_I2C_CR_HOLD, CDNS_I2C_CR_OFFSET);
}
static inline bool cdns_is_holdquirk(struct cdns_i2c *id, bool hold_wrkaround)
{
return (hold_wrkaround &&
(id->curr_recv_count == CDNS_I2C_FIFO_DEPTH + 1));
}
/**
* cdns_i2c_isr - Interrupt handler for the I2C device
* @irq: irq number for the I2C device
......@@ -186,6 +201,7 @@ static irqreturn_t cdns_i2c_isr(int irq, void *ptr)
{
unsigned int isr_status, avail_bytes, updatetx;
unsigned int bytes_to_send;
bool hold_quirk;
struct cdns_i2c *id = ptr;
/* Signal completion only after everything is updated */
int done_flag = 0;
......@@ -208,6 +224,8 @@ static irqreturn_t cdns_i2c_isr(int irq, void *ptr)
if (id->recv_count > id->curr_recv_count)
updatetx = 1;
hold_quirk = (id->quirks & CDNS_I2C_BROKEN_HOLD_BIT) && updatetx;
/* When receiving, handle data interrupt and completion interrupt */
if (id->p_recv_buf &&
((isr_status & CDNS_I2C_IXR_COMP) ||
......@@ -229,8 +247,7 @@ static irqreturn_t cdns_i2c_isr(int irq, void *ptr)
id->recv_count--;
id->curr_recv_count--;
if (updatetx &&
(id->curr_recv_count == CDNS_I2C_FIFO_DEPTH + 1))
if (cdns_is_holdquirk(id, hold_quirk))
break;
}
......@@ -241,8 +258,7 @@ static irqreturn_t cdns_i2c_isr(int irq, void *ptr)
* maintain transfer size non-zero while performing a large
* receive operation.
*/
if (updatetx &&
(id->curr_recv_count == CDNS_I2C_FIFO_DEPTH + 1)) {
if (cdns_is_holdquirk(id, hold_quirk)) {
/* wait while fifo is full */
while (cdns_i2c_readreg(CDNS_I2C_XFER_SIZE_OFFSET) !=
(id->curr_recv_count - CDNS_I2C_FIFO_DEPTH))
......@@ -264,6 +280,22 @@ static irqreturn_t cdns_i2c_isr(int irq, void *ptr)
CDNS_I2C_XFER_SIZE_OFFSET);
id->curr_recv_count = id->recv_count;
}
} else if (id->recv_count && !hold_quirk &&
!id->curr_recv_count) {
/* Set the slave address in address register*/
cdns_i2c_writereg(id->p_msg->addr & CDNS_I2C_ADDR_MASK,
CDNS_I2C_ADDR_OFFSET);
if (id->recv_count > CDNS_I2C_TRANSFER_SIZE) {
cdns_i2c_writereg(CDNS_I2C_TRANSFER_SIZE,
CDNS_I2C_XFER_SIZE_OFFSET);
id->curr_recv_count = CDNS_I2C_TRANSFER_SIZE;
} else {
cdns_i2c_writereg(id->recv_count,
CDNS_I2C_XFER_SIZE_OFFSET);
id->curr_recv_count = id->recv_count;
}
}
/* Clear hold (if not repeated start) and signal completion */
......@@ -535,11 +567,13 @@ static int cdns_i2c_master_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
int ret, count;
u32 reg;
struct cdns_i2c *id = adap->algo_data;
bool hold_quirk;
/* Check if the bus is free */
if (cdns_i2c_readreg(CDNS_I2C_SR_OFFSET) & CDNS_I2C_SR_BA)
return -EAGAIN;
hold_quirk = !!(id->quirks & CDNS_I2C_BROKEN_HOLD_BIT);
/*
* Set the flag to one when multiple messages are to be
* processed with a repeated start.
......@@ -552,7 +586,7 @@ static int cdns_i2c_master_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
* followed by any other message, an error is returned
* indicating that this sequence is not supported.
*/
for (count = 0; count < num - 1; count++) {
for (count = 0; (count < num - 1 && hold_quirk); count++) {
if (msgs[count].flags & I2C_M_RD) {
dev_warn(adap->dev.parent,
"Can't do repeated start after a receive message\n");
......@@ -815,6 +849,17 @@ static int __maybe_unused cdns_i2c_resume(struct device *_dev)
static SIMPLE_DEV_PM_OPS(cdns_i2c_dev_pm_ops, cdns_i2c_suspend,
cdns_i2c_resume);
static const struct cdns_platform_data r1p10_i2c_def = {
.quirks = CDNS_I2C_BROKEN_HOLD_BIT,
};
static const struct of_device_id cdns_i2c_of_match[] = {
{ .compatible = "cdns,i2c-r1p10", .data = &r1p10_i2c_def },
{ .compatible = "cdns,i2c-r1p14",},
{ /* end of table */ }
};
MODULE_DEVICE_TABLE(of, cdns_i2c_of_match);
/**
* cdns_i2c_probe - Platform registration call
* @pdev: Handle to the platform device structure
......@@ -830,6 +875,7 @@ static int cdns_i2c_probe(struct platform_device *pdev)
struct resource *r_mem;
struct cdns_i2c *id;
int ret;
const struct of_device_id *match;
id = devm_kzalloc(&pdev->dev, sizeof(*id), GFP_KERNEL);
if (!id)
......@@ -837,6 +883,12 @@ static int cdns_i2c_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, id);
match = of_match_node(cdns_i2c_of_match, pdev->dev.of_node);
if (match && match->data) {
const struct cdns_platform_data *data = match->data;
id->quirks = data->quirks;
}
r_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
id->membase = devm_ioremap_resource(&pdev->dev, r_mem);
if (IS_ERR(id->membase))
......@@ -844,6 +896,7 @@ static int cdns_i2c_probe(struct platform_device *pdev)
id->irq = platform_get_irq(pdev, 0);
id->adap.owner = THIS_MODULE;
id->adap.dev.of_node = pdev->dev.of_node;
id->adap.algo = &cdns_i2c_algo;
id->adap.timeout = CDNS_I2C_TIMEOUT;
......@@ -935,12 +988,6 @@ static int cdns_i2c_remove(struct platform_device *pdev)
return 0;
}
static const struct of_device_id cdns_i2c_of_match[] = {
{ .compatible = "cdns,i2c-r1p10", },
{ /* end of table */ }
};
MODULE_DEVICE_TABLE(of, cdns_i2c_of_match);
static struct platform_driver cdns_i2c_drv = {
.driver = {
.name = DRIVER_NAME,
......
......@@ -777,8 +777,7 @@ irqreturn_t i2c_dw_isr(int this_irq, void *dev_id)
enabled = dw_readl(dev, DW_IC_ENABLE);
stat = dw_readl(dev, DW_IC_RAW_INTR_STAT);
dev_dbg(dev->dev, "%s: %s enabled= 0x%x stat=0x%x\n", __func__,
dev->adapter.name, enabled, stat);
dev_dbg(dev->dev, "%s: enabled=%#x stat=%#x\n", __func__, enabled, stat);
if (!enabled || !(stat & ~DW_IC_INTR_ACTIVITY))
return IRQ_NONE;
......
......@@ -260,8 +260,8 @@ static int i2c_dw_pci_probe(struct pci_dev *pdev,
snprintf(adap->name, sizeof(adap->name), "i2c-designware-pci");
r = devm_request_irq(&pdev->dev, pdev->irq, i2c_dw_isr, IRQF_SHARED,
adap->name, dev);
r = devm_request_irq(&pdev->dev, pdev->irq, i2c_dw_isr,
IRQF_SHARED | IRQF_COND_SUSPEND, adap->name, dev);
if (r) {
dev_err(&pdev->dev, "failure requesting irq %i\n", dev->irq);
return r;
......
/*
* I2C driver for the Renesas EMEV2 SoC
*
* Copyright (C) 2015 Wolfram Sang <wsa@sang-engineering.com>
* Copyright 2013 Codethink Ltd.
* Copyright 2010-2015 Renesas Electronics Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2
* as published by the Free Software Foundation.
*/
#include <linux/clk.h>
#include <linux/completion.h>
#include <linux/device.h>
#include <linux/i2c.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/of_device.h>
#include <linux/platform_device.h>
#include <linux/sched.h>
/* I2C Registers */
#define I2C_OFS_IICACT0 0x00 /* start */
#define I2C_OFS_IIC0 0x04 /* shift */
#define I2C_OFS_IICC0 0x08 /* control */
#define I2C_OFS_SVA0 0x0c /* slave address */
#define I2C_OFS_IICCL0 0x10 /* clock select */
#define I2C_OFS_IICX0 0x14 /* extension */
#define I2C_OFS_IICS0 0x18 /* status */
#define I2C_OFS_IICSE0 0x1c /* status For emulation */
#define I2C_OFS_IICF0 0x20 /* IIC flag */
/* I2C IICACT0 Masks */
#define I2C_BIT_IICE0 0x0001
/* I2C IICC0 Masks */
#define I2C_BIT_LREL0 0x0040
#define I2C_BIT_WREL0 0x0020
#define I2C_BIT_SPIE0 0x0010
#define I2C_BIT_WTIM0 0x0008
#define I2C_BIT_ACKE0 0x0004
#define I2C_BIT_STT0 0x0002
#define I2C_BIT_SPT0 0x0001
/* I2C IICCL0 Masks */
#define I2C_BIT_SMC0 0x0008
#define I2C_BIT_DFC0 0x0004
/* I2C IICSE0 Masks */
#define I2C_BIT_MSTS0 0x0080
#define I2C_BIT_ALD0 0x0040
#define I2C_BIT_EXC0 0x0020
#define I2C_BIT_COI0 0x0010
#define I2C_BIT_TRC0 0x0008
#define I2C_BIT_ACKD0 0x0004
#define I2C_BIT_STD0 0x0002
#define I2C_BIT_SPD0 0x0001
/* I2C IICF0 Masks */
#define I2C_BIT_STCF 0x0080
#define I2C_BIT_IICBSY 0x0040
#define I2C_BIT_STCEN 0x0002
#define I2C_BIT_IICRSV 0x0001
struct em_i2c_device {
void __iomem *base;
struct i2c_adapter adap;
struct completion msg_done;
struct clk *sclk;
};
static inline void em_clear_set_bit(struct em_i2c_device *priv, u8 clear, u8 set, u8 reg)
{
writeb((readb(priv->base + reg) & ~clear) | set, priv->base + reg);
}
static int em_i2c_wait_for_event(struct em_i2c_device *priv)
{
unsigned long time_left;
int status;
reinit_completion(&priv->msg_done);
time_left = wait_for_completion_timeout(&priv->msg_done, priv->adap.timeout);
if (!time_left)
return -ETIMEDOUT;
status = readb(priv->base + I2C_OFS_IICSE0);
return status & I2C_BIT_ALD0 ? -EAGAIN : status;
}
static void em_i2c_stop(struct em_i2c_device *priv)
{
/* Send Stop condition */
em_clear_set_bit(priv, 0, I2C_BIT_SPT0 | I2C_BIT_SPIE0, I2C_OFS_IICC0);
/* Wait for stop condition */
em_i2c_wait_for_event(priv);
}
static void em_i2c_reset(struct i2c_adapter *adap)
{
struct em_i2c_device *priv = i2c_get_adapdata(adap);
int retr;
/* If I2C active */
if (readb(priv->base + I2C_OFS_IICACT0) & I2C_BIT_IICE0) {
/* Disable I2C operation */
writeb(0, priv->base + I2C_OFS_IICACT0);
retr = 1000;
while (readb(priv->base + I2C_OFS_IICACT0) == 1 && retr)
retr--;
WARN_ON(retr == 0);
}
/* Transfer mode set */
writeb(I2C_BIT_DFC0, priv->base + I2C_OFS_IICCL0);
/* Can Issue start without detecting a stop, Reservation disabled. */
writeb(I2C_BIT_STCEN | I2C_BIT_IICRSV, priv->base + I2C_OFS_IICF0);
/* I2C enable, 9 bit interrupt mode */
writeb(I2C_BIT_WTIM0, priv->base + I2C_OFS_IICC0);
/* Enable I2C operation */
writeb(I2C_BIT_IICE0, priv->base + I2C_OFS_IICACT0);
retr = 1000;
while (readb(priv->base + I2C_OFS_IICACT0) == 0 && retr)
retr--;
WARN_ON(retr == 0);
}
static int __em_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msg,
int stop)
{
struct em_i2c_device *priv = i2c_get_adapdata(adap);
int count, status, read = !!(msg->flags & I2C_M_RD);
/* Send start condition */
em_clear_set_bit(priv, 0, I2C_BIT_ACKE0 | I2C_BIT_WTIM0, I2C_OFS_IICC0);
em_clear_set_bit(priv, 0, I2C_BIT_STT0, I2C_OFS_IICC0);
/* Send slave address and R/W type */
writeb((msg->addr << 1) | read, priv->base + I2C_OFS_IIC0);
/* Wait for transaction */
status = em_i2c_wait_for_event(priv);
if (status < 0)
goto out_reset;
/* Received NACK (result of setting slave address and R/W) */
if (!(status & I2C_BIT_ACKD0)) {
em_i2c_stop(priv);
goto out;
}
/* Extra setup for read transactions */
if (read) {
/* 8 bit interrupt mode */
em_clear_set_bit(priv, I2C_BIT_WTIM0, I2C_BIT_ACKE0, I2C_OFS_IICC0);
em_clear_set_bit(priv, I2C_BIT_WTIM0, I2C_BIT_WREL0, I2C_OFS_IICC0);
/* Wait for transaction */
status = em_i2c_wait_for_event(priv);
if (status < 0)
goto out_reset;
}
/* Send / receive data */
for (count = 0; count < msg->len; count++) {
if (read) { /* Read transaction */
msg->buf[count] = readb(priv->base + I2C_OFS_IIC0);
em_clear_set_bit(priv, 0, I2C_BIT_WREL0, I2C_OFS_IICC0);
} else { /* Write transaction */
/* Received NACK */
if (!(status & I2C_BIT_ACKD0)) {
em_i2c_stop(priv);
goto out;
}
/* Write data */
writeb(msg->buf[count], priv->base + I2C_OFS_IIC0);
}
/* Wait for R/W transaction */
status = em_i2c_wait_for_event(priv);
if (status < 0)
goto out_reset;
}
if (stop)
em_i2c_stop(priv);
return count;
out_reset:
em_i2c_reset(adap);
out:
return status < 0 ? status : -ENXIO;
}
static int em_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
int num)
{
struct em_i2c_device *priv = i2c_get_adapdata(adap);
int ret, i;
if (readb(priv->base + I2C_OFS_IICF0) & I2C_BIT_IICBSY)
return -EAGAIN;
for (i = 0; i < num; i++) {
ret = __em_i2c_xfer(adap, &msgs[i], (i == (num - 1)));
if (ret < 0)
return ret;
}
/* I2C transfer completed */
return num;
}
static irqreturn_t em_i2c_irq_handler(int this_irq, void *dev_id)
{
struct em_i2c_device *priv = dev_id;
complete(&priv->msg_done);
return IRQ_HANDLED;
}
static u32 em_i2c_func(struct i2c_adapter *adap)
{
return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
}
static struct i2c_algorithm em_i2c_algo = {
.master_xfer = em_i2c_xfer,
.functionality = em_i2c_func,
};
static int em_i2c_probe(struct platform_device *pdev)
{
struct em_i2c_device *priv;
struct resource *r;
int irq, ret;
priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
if (!priv)
return -ENOMEM;
r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
priv->base = devm_ioremap_resource(&pdev->dev, r);
if (IS_ERR(priv->base))
return PTR_ERR(priv->base);
strlcpy(priv->adap.name, "EMEV2 I2C", sizeof(priv->adap.name));
priv->sclk = devm_clk_get(&pdev->dev, "sclk");
if (IS_ERR(priv->sclk))
return PTR_ERR(priv->sclk);
clk_prepare_enable(priv->sclk);
priv->adap.timeout = msecs_to_jiffies(100);
priv->adap.retries = 5;
priv->adap.dev.parent = &pdev->dev;
priv->adap.algo = &em_i2c_algo;
priv->adap.owner = THIS_MODULE;
priv->adap.dev.of_node = pdev->dev.of_node;
init_completion(&priv->msg_done);
platform_set_drvdata(pdev, priv);
i2c_set_adapdata(&priv->adap, priv);
em_i2c_reset(&priv->adap);
irq = platform_get_irq(pdev, 0);
ret = devm_request_irq(&pdev->dev, irq, em_i2c_irq_handler, 0,
"em_i2c", priv);
if (ret)
goto err_clk;
ret = i2c_add_adapter(&priv->adap);
if (ret)
goto err_clk;
dev_info(&pdev->dev, "Added i2c controller %d, irq %d\n", priv->adap.nr, irq);
return 0;
err_clk:
clk_disable_unprepare(priv->sclk);
return ret;
}
static int em_i2c_remove(struct platform_device *dev)
{
struct em_i2c_device *priv = platform_get_drvdata(dev);
i2c_del_adapter(&priv->adap);
clk_disable_unprepare(priv->sclk);
return 0;
}
static const struct of_device_id em_i2c_ids[] = {
{ .compatible = "renesas,iic-emev2", },
{ }
};
static struct platform_driver em_i2c_driver = {
.probe = em_i2c_probe,
.remove = em_i2c_remove,
.driver = {
.name = "em-i2c",
.of_match_table = em_i2c_ids,
}
};
module_platform_driver(em_i2c_driver);
MODULE_DESCRIPTION("EMEV2 I2C bus driver");
MODULE_AUTHOR("Ian Molton and Wolfram Sang <wsa@sang-engineering.com>");
MODULE_LICENSE("GPL v2");
MODULE_DEVICE_TABLE(of, em_i2c_ids);
This diff is collapsed.
......@@ -59,6 +59,7 @@
#define I2C_DMA_START_EN 0x0001
#define I2C_DMA_INT_FLAG_NONE 0x0000
#define I2C_DMA_CLR_FLAG 0x0000
#define I2C_DMA_HARD_RST 0x0002
#define I2C_DEFAULT_SPEED 100000 /* hz */
#define MAX_FS_MODE_SPEED 400000
......@@ -81,6 +82,7 @@ enum DMA_REGS_OFFSET {
OFFSET_INT_FLAG = 0x0,
OFFSET_INT_EN = 0x04,
OFFSET_EN = 0x08,
OFFSET_RST = 0x0c,
OFFSET_CON = 0x18,
OFFSET_TX_MEM_ADDR = 0x1c,
OFFSET_RX_MEM_ADDR = 0x20,
......@@ -262,6 +264,10 @@ static void mtk_i2c_init_hw(struct mtk_i2c *i2c)
I2C_CONTROL_CLK_EXT_EN | I2C_CONTROL_DMA_EN;
writew(control_reg, i2c->base + OFFSET_CONTROL);
writew(I2C_DELAY_LEN, i2c->base + OFFSET_DELAY_LEN);
writel(I2C_DMA_HARD_RST, i2c->pdmabase + OFFSET_RST);
udelay(50);
writel(I2C_DMA_CLR_FLAG, i2c->pdmabase + OFFSET_RST);
}
/*
......@@ -551,14 +557,21 @@ static irqreturn_t mtk_i2c_irq(int irqno, void *dev_id)
{
struct mtk_i2c *i2c = dev_id;
u16 restart_flag = 0;
u16 intr_stat;
if (i2c->dev_comp->auto_restart)
restart_flag = I2C_RS_TRANSFER;
i2c->irq_stat = readw(i2c->base + OFFSET_INTR_STAT);
writew(restart_flag | I2C_HS_NACKERR | I2C_ACKERR
| I2C_TRANSAC_COMP, i2c->base + OFFSET_INTR_STAT);
intr_stat = readw(i2c->base + OFFSET_INTR_STAT);
writew(intr_stat, i2c->base + OFFSET_INTR_STAT);
/*
* when occurs ack error, i2c controller generate two interrupts
* first is the ack error interrupt, then the complete interrupt
* i2c->irq_stat need keep the two interrupt value.
*/
i2c->irq_stat |= intr_stat;
if (i2c->irq_stat & (I2C_TRANSAC_COMP | restart_flag))
complete(&i2c->msg_complete);
return IRQ_HANDLED;
......
This diff is collapsed.
......@@ -20,6 +20,8 @@
GNU General Public License for more details.
* ------------------------------------------------------------------------ */
#define pr_fmt(fmt) "i2c-parport: " fmt
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
......@@ -176,26 +178,24 @@ static void i2c_parport_attach(struct parport *port)
break;
}
if (i == MAX_DEVICE) {
pr_debug("i2c-parport: Not using parport%d.\n", port->number);
pr_debug("Not using parport%d.\n", port->number);
return;
}
adapter = kzalloc(sizeof(struct i2c_par), GFP_KERNEL);
if (adapter == NULL) {
printk(KERN_ERR "i2c-parport: Failed to kzalloc\n");
if (!adapter)
return;
}
memset(&i2c_parport_cb, 0, sizeof(i2c_parport_cb));
i2c_parport_cb.flags = PARPORT_FLAG_EXCL;
i2c_parport_cb.irq_func = i2c_parport_irq;
i2c_parport_cb.private = adapter;
pr_debug("i2c-parport: attaching to %s\n", port->name);
pr_debug("attaching to %s\n", port->name);
parport_disable_irq(port);
adapter->pdev = parport_register_dev_model(port, "i2c-parport",
&i2c_parport_cb, i);
if (!adapter->pdev) {
printk(KERN_ERR "i2c-parport: Unable to register with parport\n");
pr_err("Unable to register with parport\n");
goto err_free;
}
......@@ -215,7 +215,8 @@ static void i2c_parport_attach(struct parport *port)
adapter->adapter.dev.parent = port->physport->dev;
if (parport_claim_or_block(adapter->pdev) < 0) {
printk(KERN_ERR "i2c-parport: Could not claim parallel port\n");
dev_err(&adapter->pdev->dev,
"Could not claim parallel port\n");
goto err_unregister;
}
......@@ -230,7 +231,7 @@ static void i2c_parport_attach(struct parport *port)
}
if (i2c_bit_add_bus(&adapter->adapter) < 0) {
printk(KERN_ERR "i2c-parport: Unable to register with I2C\n");
dev_err(&adapter->pdev->dev, "Unable to register with I2C\n");
goto err_unregister;
}
......@@ -242,8 +243,8 @@ static void i2c_parport_attach(struct parport *port)
if (adapter->ara)
parport_enable_irq(port);
else
printk(KERN_WARNING "i2c-parport: Failed to register "
"ARA client\n");
dev_warn(&adapter->pdev->dev,
"Failed to register ARA client\n");
}
/* Add the new adapter to the list */
......@@ -298,12 +299,12 @@ static struct parport_driver i2c_parport_driver = {
static int __init i2c_parport_init(void)
{
if (type < 0) {
printk(KERN_WARNING "i2c-parport: adapter type unspecified\n");
pr_warn("adapter type unspecified\n");
return -ENODEV;
}
if (type >= ARRAY_SIZE(adapter_parm)) {
printk(KERN_WARNING "i2c-parport: invalid type (%d)\n", type);
pr_warn("invalid type (%d)\n", type);
return -ENODEV;
}
......
......@@ -89,6 +89,13 @@ static const struct adapter_parm adapter_parm[] = {
.getsda = { 0x80, PORT_STAT, 1 },
.init = { 0x04, PORT_DATA, 1 },
},
/* type 8: VCT-jig */
{
.setsda = { 0x04, PORT_DATA, 1 },
.setscl = { 0x01, PORT_DATA, 1 },
.getsda = { 0x40, PORT_STAT, 0 },
.getscl = { 0x80, PORT_STAT, 1 },
},
};
static int type = -1;
......@@ -103,4 +110,5 @@ MODULE_PARM_DESC(type,
" 5 = ADM1025, ADM1030 and ADM1031 evaluation boards\n"
" 6 = Barco LPT->DVI (K5800236) adapter\n"
" 7 = One For All JP1 parallel port adapter\n"
" 8 = VCT-jig\n"
);
......@@ -132,6 +132,7 @@ struct pxa_i2c {
unsigned int msg_idx;
unsigned int msg_ptr;
unsigned int slave_addr;
unsigned int req_slave_addr;
struct i2c_adapter adap;
struct clk *clk;
......@@ -253,15 +254,20 @@ static void i2c_pxa_show_state(struct pxa_i2c *i2c, int lno, const char *fname)
static void i2c_pxa_scream_blue_murder(struct pxa_i2c *i2c, const char *why)
{
unsigned int i;
printk(KERN_ERR "i2c: error: %s\n", why);
printk(KERN_ERR "i2c: msg_num: %d msg_idx: %d msg_ptr: %d\n",
struct device *dev = &i2c->adap.dev;
dev_err(dev, "slave_0x%x error: %s\n",
i2c->req_slave_addr >> 1, why);
dev_err(dev, "msg_num: %d msg_idx: %d msg_ptr: %d\n",
i2c->msg_num, i2c->msg_idx, i2c->msg_ptr);
printk(KERN_ERR "i2c: ICR: %08x ISR: %08x\n",
readl(_ICR(i2c)), readl(_ISR(i2c)));
printk(KERN_DEBUG "i2c: log: ");
dev_err(dev, "IBMR: %08x IDBR: %08x ICR: %08x ISR: %08x\n",
readl(_IBMR(i2c)), readl(_IDBR(i2c)), readl(_ICR(i2c)),
readl(_ISR(i2c)));
dev_dbg(dev, "log: ");
for (i = 0; i < i2c->irqlogidx; i++)
printk("[%08x:%08x] ", i2c->isrlog[i], i2c->icrlog[i]);
printk("\n");
pr_debug("[%08x:%08x] ", i2c->isrlog[i], i2c->icrlog[i]);
pr_debug("\n");
}
#else /* ifdef DEBUG */
......@@ -459,7 +465,7 @@ static void i2c_pxa_reset(struct pxa_i2c *i2c)
writel(I2C_ISR_INIT, _ISR(i2c));
writel(readl(_ICR(i2c)) & ~ICR_UR, _ICR(i2c));
if (i2c->reg_isar)
if (i2c->reg_isar && IS_ENABLED(CONFIG_I2C_PXA_SLAVE))
writel(i2c->slave_addr, _ISAR(i2c));
/* set control register values */
......@@ -638,6 +644,7 @@ static inline void i2c_pxa_start_message(struct pxa_i2c *i2c)
* Step 1: target slave address into IDBR
*/
writel(i2c_pxa_addr_byte(i2c->msg), _IDBR(i2c));
i2c->req_slave_addr = i2c_pxa_addr_byte(i2c->msg);
/*
* Step 2: initiate the write.
......@@ -745,8 +752,10 @@ static int i2c_pxa_do_pio_xfer(struct pxa_i2c *i2c,
ret = i2c->msg_idx;
out:
if (timeout == 0)
if (timeout == 0) {
i2c_pxa_scream_blue_murder(i2c, "timeout");
ret = I2C_RETRY;
}
return ret;
}
......@@ -949,6 +958,7 @@ static void i2c_pxa_irq_txempty(struct pxa_i2c *i2c, u32 isr)
* Write the next address.
*/
writel(i2c_pxa_addr_byte(i2c->msg), _IDBR(i2c));
i2c->req_slave_addr = i2c_pxa_addr_byte(i2c->msg);
/*
* And trigger a repeated start, and send the byte.
......@@ -1114,7 +1124,9 @@ static int i2c_pxa_probe_dt(struct platform_device *pdev, struct pxa_i2c *i2c,
i2c->use_pio = 1;
if (of_get_property(np, "mrvl,i2c-fast-mode", NULL))
i2c->fast_mode = 1;
*i2c_types = (u32)(of_id->data);
*i2c_types = (enum pxa_i2c_types)(of_id->data);
return 0;
}
......@@ -1146,10 +1158,19 @@ static int i2c_pxa_probe(struct platform_device *dev)
struct resource *res = NULL;
int ret, irq;
i2c = kzalloc(sizeof(struct pxa_i2c), GFP_KERNEL);
if (!i2c) {
ret = -ENOMEM;
goto emalloc;
i2c = devm_kzalloc(&dev->dev, sizeof(struct pxa_i2c), GFP_KERNEL);
if (!i2c)
return -ENOMEM;
res = platform_get_resource(dev, IORESOURCE_MEM, 0);
i2c->reg_base = devm_ioremap_resource(&dev->dev, res);
if (IS_ERR(i2c->reg_base))
return PTR_ERR(i2c->reg_base);
irq = platform_get_irq(dev, 0);
if (irq < 0) {
dev_err(&dev->dev, "no irq resource: %d\n", irq);
return irq;
}
/* Default adapter num to device id; i2c_pxa_probe_dt can override. */
......@@ -1159,19 +1180,7 @@ static int i2c_pxa_probe(struct platform_device *dev)
if (ret > 0)
ret = i2c_pxa_probe_pdata(dev, i2c, &i2c_type);
if (ret < 0)
goto eclk;
res = platform_get_resource(dev, IORESOURCE_MEM, 0);
irq = platform_get_irq(dev, 0);
if (res == NULL || irq < 0) {
ret = -ENODEV;
goto eclk;
}
if (!request_mem_region(res->start, resource_size(res), res->name)) {
ret = -ENOMEM;
goto eclk;
}
return ret;
i2c->adap.owner = THIS_MODULE;
i2c->adap.retries = 5;
......@@ -1181,16 +1190,10 @@ static int i2c_pxa_probe(struct platform_device *dev)
strlcpy(i2c->adap.name, "pxa_i2c-i2c", sizeof(i2c->adap.name));
i2c->clk = clk_get(&dev->dev, NULL);
i2c->clk = devm_clk_get(&dev->dev, NULL);
if (IS_ERR(i2c->clk)) {
ret = PTR_ERR(i2c->clk);
goto eclk;
}
i2c->reg_base = ioremap(res->start, resource_size(res));
if (!i2c->reg_base) {
ret = -EIO;
goto eremap;
dev_err(&dev->dev, "failed to get the clk: %ld\n", PTR_ERR(i2c->clk));
return PTR_ERR(i2c->clk);
}
i2c->reg_ibmr = i2c->reg_base + pxa_reg_layout[i2c_type].ibmr;
......@@ -1232,11 +1235,14 @@ static int i2c_pxa_probe(struct platform_device *dev)
i2c->adap.algo = &i2c_pxa_pio_algorithm;
} else {
i2c->adap.algo = &i2c_pxa_algorithm;
ret = request_irq(irq, i2c_pxa_handler, IRQF_SHARED,
ret = devm_request_irq(&dev->dev, irq, i2c_pxa_handler,
IRQF_SHARED | IRQF_NO_SUSPEND,
dev_name(&dev->dev), i2c);
if (ret)
if (ret) {
dev_err(&dev->dev, "failed to request irq: %d\n", ret);
goto ereqirq;
}
}
i2c_pxa_reset(i2c);
......@@ -1248,33 +1254,22 @@ static int i2c_pxa_probe(struct platform_device *dev)
ret = i2c_add_numbered_adapter(&i2c->adap);
if (ret < 0) {
printk(KERN_INFO "I2C: Failed to add bus\n");
goto eadapt;
dev_err(&dev->dev, "failed to add bus: %d\n", ret);
goto ereqirq;
}
platform_set_drvdata(dev, i2c);
#ifdef CONFIG_I2C_PXA_SLAVE
printk(KERN_INFO "I2C: %s: PXA I2C adapter, slave address %d\n",
dev_name(&i2c->adap.dev), i2c->slave_addr);
dev_info(&i2c->adap.dev, " PXA I2C adapter, slave address %d\n",
i2c->slave_addr);
#else
printk(KERN_INFO "I2C: %s: PXA I2C adapter\n",
dev_name(&i2c->adap.dev));
dev_info(&i2c->adap.dev, " PXA I2C adapter\n");
#endif
return 0;
eadapt:
if (!i2c->use_pio)
free_irq(irq, i2c);
ereqirq:
clk_disable_unprepare(i2c->clk);
iounmap(i2c->reg_base);
eremap:
clk_put(i2c->clk);
eclk:
kfree(i2c);
emalloc:
release_mem_region(res->start, resource_size(res));
return ret;
}
......@@ -1283,15 +1278,8 @@ static int i2c_pxa_remove(struct platform_device *dev)
struct pxa_i2c *i2c = platform_get_drvdata(dev);
i2c_del_adapter(&i2c->adap);
if (!i2c->use_pio)
free_irq(i2c->irq, i2c);
clk_disable_unprepare(i2c->clk);
clk_put(i2c->clk);
iounmap(i2c->reg_base);
release_mem_region(i2c->iobase, i2c->iosize);
kfree(i2c);
return 0;
}
......
......@@ -100,6 +100,12 @@
#define I2C_HEADER_CONTINUE_XFER (1<<15)
#define I2C_HEADER_MASTER_ADDR_SHIFT 12
#define I2C_HEADER_SLAVE_ADDR_SHIFT 1
#define I2C_CONFIG_LOAD 0x08C
#define I2C_MSTR_CONFIG_LOAD (1 << 0)
#define I2C_SLV_CONFIG_LOAD (1 << 1)
#define I2C_TIMEOUT_CONFIG_LOAD (1 << 2)
/*
* msg_end_type: The bus control which need to be send at end of transfer.
* @MSG_END_STOP: Send stop pulse at end of transfer.
......@@ -121,6 +127,8 @@ enum msg_end_type {
* @has_single_clk_source: The i2c controller has single clock source. Tegra30
* and earlier Socs has two clock sources i.e. div-clk and
* fast-clk.
* @has_config_load_reg: Has the config load register to load the new
* configuration.
* @clk_divisor_hs_mode: Clock divisor in HS mode.
* @clk_divisor_std_fast_mode: Clock divisor in standard/fast mode. It is
* applicable if there is no fast clock source i.e. single clock
......@@ -131,8 +139,10 @@ struct tegra_i2c_hw_feature {
bool has_continue_xfer_support;
bool has_per_pkt_xfer_complete_irq;
bool has_single_clk_source;
bool has_config_load_reg;
int clk_divisor_hs_mode;
int clk_divisor_std_fast_mode;
u16 clk_divisor_fast_plus_mode;
};
/**
......@@ -172,6 +182,7 @@ struct tegra_i2c_dev {
size_t msg_buf_remaining;
int msg_read;
u32 bus_clk_rate;
u16 clk_divisor_non_hs_mode;
bool is_suspended;
};
......@@ -410,6 +421,7 @@ static int tegra_i2c_init(struct tegra_i2c_dev *i2c_dev)
u32 val;
int err = 0;
u32 clk_divisor;
unsigned long timeout = jiffies + HZ;
err = tegra_i2c_clock_enable(i2c_dev);
if (err < 0) {
......@@ -431,7 +443,7 @@ static int tegra_i2c_init(struct tegra_i2c_dev *i2c_dev)
/* Make sure clock divisor programmed correctly */
clk_divisor = i2c_dev->hw->clk_divisor_hs_mode;
clk_divisor |= i2c_dev->hw->clk_divisor_std_fast_mode <<
clk_divisor |= i2c_dev->clk_divisor_non_hs_mode <<
I2C_CLK_DIVISOR_STD_FAST_MODE_SHIFT;
i2c_writel(i2c_dev, clk_divisor, I2C_CLK_DIVISOR);
......@@ -451,6 +463,18 @@ static int tegra_i2c_init(struct tegra_i2c_dev *i2c_dev)
if (tegra_i2c_flush_fifos(i2c_dev))
err = -ETIMEDOUT;
if (i2c_dev->hw->has_config_load_reg) {
i2c_writel(i2c_dev, I2C_MSTR_CONFIG_LOAD, I2C_CONFIG_LOAD);
while (i2c_readl(i2c_dev, I2C_CONFIG_LOAD) != 0) {
if (time_after(jiffies, timeout)) {
dev_warn(i2c_dev->dev,
"timeout waiting for config load\n");
return -ETIMEDOUT;
}
msleep(1);
}
}
tegra_i2c_clock_disable(i2c_dev);
if (i2c_dev->irq_disabled) {
......@@ -681,6 +705,8 @@ static const struct tegra_i2c_hw_feature tegra20_i2c_hw = {
.has_single_clk_source = false,
.clk_divisor_hs_mode = 3,
.clk_divisor_std_fast_mode = 0,
.clk_divisor_fast_plus_mode = 0,
.has_config_load_reg = false,
};
static const struct tegra_i2c_hw_feature tegra30_i2c_hw = {
......@@ -689,6 +715,8 @@ static const struct tegra_i2c_hw_feature tegra30_i2c_hw = {
.has_single_clk_source = false,
.clk_divisor_hs_mode = 3,
.clk_divisor_std_fast_mode = 0,
.clk_divisor_fast_plus_mode = 0,
.has_config_load_reg = false,
};
static const struct tegra_i2c_hw_feature tegra114_i2c_hw = {
......@@ -697,10 +725,23 @@ static const struct tegra_i2c_hw_feature tegra114_i2c_hw = {
.has_single_clk_source = true,
.clk_divisor_hs_mode = 1,
.clk_divisor_std_fast_mode = 0x19,
.clk_divisor_fast_plus_mode = 0x10,
.has_config_load_reg = false,
};
static const struct tegra_i2c_hw_feature tegra124_i2c_hw = {
.has_continue_xfer_support = true,
.has_per_pkt_xfer_complete_irq = true,
.has_single_clk_source = true,
.clk_divisor_hs_mode = 1,
.clk_divisor_std_fast_mode = 0x19,
.clk_divisor_fast_plus_mode = 0x10,
.has_config_load_reg = true,
};
/* Match table for of_platform binding */
static const struct of_device_id tegra_i2c_of_match[] = {
{ .compatible = "nvidia,tegra124-i2c", .data = &tegra124_i2c_hw, },
{ .compatible = "nvidia,tegra114-i2c", .data = &tegra114_i2c_hw, },
{ .compatible = "nvidia,tegra30-i2c", .data = &tegra30_i2c_hw, },
{ .compatible = "nvidia,tegra20-i2c", .data = &tegra20_i2c_hw, },
......@@ -793,7 +834,14 @@ static int tegra_i2c_probe(struct platform_device *pdev)
}
}
clk_multiplier *= (i2c_dev->hw->clk_divisor_std_fast_mode + 1);
i2c_dev->clk_divisor_non_hs_mode =
i2c_dev->hw->clk_divisor_std_fast_mode;
if (i2c_dev->hw->clk_divisor_fast_plus_mode &&
(i2c_dev->bus_clk_rate == 1000000))
i2c_dev->clk_divisor_non_hs_mode =
i2c_dev->hw->clk_divisor_fast_plus_mode;
clk_multiplier *= (i2c_dev->clk_divisor_non_hs_mode + 1);
ret = clk_set_rate(i2c_dev->div_clk,
i2c_dev->bus_clk_rate * clk_multiplier);
if (ret) {
......
......@@ -392,8 +392,8 @@ static int vprbrd_i2c_probe(struct platform_device *pdev)
0x0000, 0x0000, &vb_i2c->bus_freq_param, 1,
VPRBRD_USB_TIMEOUT_MS);
if (ret != 1) {
dev_err(&pdev->dev,
"failure setting i2c_bus_freq to %d\n", i2c_bus_freq);
dev_err(&pdev->dev, "failure setting i2c_bus_freq to %d\n",
i2c_bus_freq);
return -EIO;
}
} else {
......
......@@ -198,10 +198,10 @@ static int slimpro_i2c_blkrd(struct slimpro_i2c_dev *ctx, u32 chip, u32 addr,
int rc;
paddr = dma_map_single(ctx->dev, ctx->dma_buffer, readlen, DMA_FROM_DEVICE);
rc = dma_mapping_error(ctx->dev, paddr);
if (rc) {
if (dma_mapping_error(ctx->dev, paddr)) {
dev_err(&ctx->adapter.dev, "Error in mapping dma buffer %p\n",
ctx->dma_buffer);
rc = -ENOMEM;
goto err;
}
......@@ -241,10 +241,10 @@ static int slimpro_i2c_blkwr(struct slimpro_i2c_dev *ctx, u32 chip,
memcpy(ctx->dma_buffer, data, writelen);
paddr = dma_map_single(ctx->dev, ctx->dma_buffer, writelen,
DMA_TO_DEVICE);
rc = dma_mapping_error(ctx->dev, paddr);
if (rc) {
if (dma_mapping_error(ctx->dev, paddr)) {
dev_err(&ctx->adapter.dev, "Error in mapping dma buffer %p\n",
ctx->dma_buffer);
rc = -ENOMEM;
goto err;
}
......
......@@ -283,7 +283,7 @@ static void xiic_reinit(struct xiic_i2c *i2c)
/* Enable interrupts */
xiic_setreg32(i2c, XIIC_DGIER_OFFSET, XIIC_GINTR_ENABLE_MASK);
xiic_irq_clr_en(i2c, XIIC_INTR_AAS_MASK | XIIC_INTR_ARB_LOST_MASK);
xiic_irq_clr_en(i2c, XIIC_INTR_ARB_LOST_MASK);
}
static void xiic_deinit(struct xiic_i2c *i2c)
......@@ -358,8 +358,9 @@ static void xiic_wakeup(struct xiic_i2c *i2c, int code)
wake_up(&i2c->wait);
}
static void xiic_process(struct xiic_i2c *i2c)
static irqreturn_t xiic_process(int irq, void *dev_id)
{
struct xiic_i2c *i2c = dev_id;
u32 pend, isr, ier;
u32 clr = 0;
......@@ -368,6 +369,7 @@ static void xiic_process(struct xiic_i2c *i2c)
* To find which interrupts are pending; AND interrupts pending with
* interrupts masked.
*/
spin_lock(&i2c->lock);
isr = xiic_getreg32(i2c, XIIC_IISR_OFFSET);
ier = xiic_getreg32(i2c, XIIC_IIER_OFFSET);
pend = isr & ier;
......@@ -378,11 +380,6 @@ static void xiic_process(struct xiic_i2c *i2c)
__func__, xiic_getreg8(i2c, XIIC_SR_REG_OFFSET),
i2c->tx_msg, i2c->nmsgs);
/* Do not processes a devices interrupts if the device has no
* interrupts pending
*/
if (!pend)
return;
/* Service requesting interrupt */
if ((pend & XIIC_INTR_ARB_LOST_MASK) ||
......@@ -402,13 +399,15 @@ static void xiic_process(struct xiic_i2c *i2c)
*/
xiic_reinit(i2c);
if (i2c->rx_msg)
xiic_wakeup(i2c, STATE_ERROR);
if (i2c->tx_msg)
xiic_wakeup(i2c, STATE_ERROR);
} else if (pend & XIIC_INTR_RX_FULL_MASK) {
}
if (pend & XIIC_INTR_RX_FULL_MASK) {
/* Receive register/FIFO is full */
clr = XIIC_INTR_RX_FULL_MASK;
clr |= XIIC_INTR_RX_FULL_MASK;
if (!i2c->rx_msg) {
dev_dbg(i2c->adap.dev.parent,
"%s unexpexted RX IRQ\n", __func__);
......@@ -441,9 +440,10 @@ static void xiic_process(struct xiic_i2c *i2c)
__xiic_start_xfer(i2c);
}
}
} else if (pend & XIIC_INTR_BNB_MASK) {
}
if (pend & XIIC_INTR_BNB_MASK) {
/* IIC bus has transitioned to not busy */
clr = XIIC_INTR_BNB_MASK;
clr |= XIIC_INTR_BNB_MASK;
/* The bus is not busy, disable BusNotBusy interrupt */
xiic_irq_dis(i2c, XIIC_INTR_BNB_MASK);
......@@ -456,12 +456,12 @@ static void xiic_process(struct xiic_i2c *i2c)
xiic_wakeup(i2c, STATE_DONE);
else
xiic_wakeup(i2c, STATE_ERROR);
} else if (pend & (XIIC_INTR_TX_EMPTY_MASK | XIIC_INTR_TX_HALF_MASK)) {
}
if (pend & (XIIC_INTR_TX_EMPTY_MASK | XIIC_INTR_TX_HALF_MASK)) {
/* Transmit register/FIFO is empty or ½ empty */
clr = pend &
(XIIC_INTR_TX_EMPTY_MASK | XIIC_INTR_TX_HALF_MASK);
clr |= (pend &
(XIIC_INTR_TX_EMPTY_MASK | XIIC_INTR_TX_HALF_MASK));
if (!i2c->tx_msg) {
dev_dbg(i2c->adap.dev.parent,
......@@ -492,16 +492,13 @@ static void xiic_process(struct xiic_i2c *i2c)
* make sure to disable tx half
*/
xiic_irq_dis(i2c, XIIC_INTR_TX_HALF_MASK);
} else {
/* got IRQ which is not acked */
dev_err(i2c->adap.dev.parent, "%s Got unexpected IRQ\n",
__func__);
clr = pend;
}
out:
dev_dbg(i2c->adap.dev.parent, "%s clr: 0x%x\n", __func__, clr);
xiic_setreg32(i2c, XIIC_IISR_OFFSET, clr);
spin_unlock(&i2c->lock);
return IRQ_HANDLED;
}
static int xiic_bus_busy(struct xiic_i2c *i2c)
......@@ -525,7 +522,7 @@ static int xiic_busy(struct xiic_i2c *i2c)
*/
err = xiic_bus_busy(i2c);
while (err && tries--) {
mdelay(1);
msleep(1);
err = xiic_bus_busy(i2c);
}
......@@ -602,19 +599,21 @@ static void xiic_start_send(struct xiic_i2c *i2c)
static irqreturn_t xiic_isr(int irq, void *dev_id)
{
struct xiic_i2c *i2c = dev_id;
spin_lock(&i2c->lock);
/* disable interrupts globally */
xiic_setreg32(i2c, XIIC_DGIER_OFFSET, 0);
u32 pend, isr, ier;
irqreturn_t ret = IRQ_NONE;
/* Do not processes a devices interrupts if the device has no
* interrupts pending
*/
dev_dbg(i2c->adap.dev.parent, "%s entry\n", __func__);
xiic_process(i2c);
xiic_setreg32(i2c, XIIC_DGIER_OFFSET, XIIC_GINTR_ENABLE_MASK);
spin_unlock(&i2c->lock);
isr = xiic_getreg32(i2c, XIIC_IISR_OFFSET);
ier = xiic_getreg32(i2c, XIIC_IIER_OFFSET);
pend = isr & ier;
if (pend)
ret = IRQ_WAKE_THREAD;
return IRQ_HANDLED;
return ret;
}
static void __xiic_start_xfer(struct xiic_i2c *i2c)
......@@ -663,16 +662,8 @@ static void __xiic_start_xfer(struct xiic_i2c *i2c)
static void xiic_start_xfer(struct xiic_i2c *i2c)
{
unsigned long flags;
spin_lock_irqsave(&i2c->lock, flags);
xiic_reinit(i2c);
/* disable interrupts globally */
xiic_setreg32(i2c, XIIC_DGIER_OFFSET, 0);
spin_unlock_irqrestore(&i2c->lock, flags);
__xiic_start_xfer(i2c);
xiic_setreg32(i2c, XIIC_DGIER_OFFSET, XIIC_GINTR_ENABLE_MASK);
}
static int xiic_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
......@@ -755,7 +746,10 @@ static int xiic_i2c_probe(struct platform_device *pdev)
spin_lock_init(&i2c->lock);
init_waitqueue_head(&i2c->wait);
ret = devm_request_irq(&pdev->dev, irq, xiic_isr, 0, pdev->name, i2c);
ret = devm_request_threaded_irq(&pdev->dev, irq, xiic_isr,
xiic_process, IRQF_ONESHOT,
pdev->name, i2c);
if (ret < 0) {
dev_err(&pdev->dev, "Cannot claim IRQ\n");
return ret;
......
This diff is collapsed.
......@@ -157,7 +157,6 @@ MODULE_DEVICE_TABLE(i2c, i2c_slave_eeprom_id);
static struct i2c_driver i2c_slave_eeprom_driver = {
.driver = {
.name = "i2c-slave-eeprom",
.owner = THIS_MODULE,
},
.probe = i2c_slave_eeprom_probe,
.remove = i2c_slave_eeprom_remove,
......
......@@ -61,4 +61,15 @@ config I2C_MUX_PINCTRL
This driver can also be built as a module. If so, the module will be
called pinctrl-i2cmux.
config I2C_MUX_REG
tristate "Register-based I2C multiplexer"
help
If you say yes to this option, support will be included for a
register based I2C multiplexer. This driver provides access to
I2C busses connected through a MUX, which is controlled
by a single register.
This driver can also be built as a module. If so, the module
will be called i2c-mux-reg.
endmenu
......@@ -7,5 +7,6 @@ obj-$(CONFIG_I2C_MUX_GPIO) += i2c-mux-gpio.o
obj-$(CONFIG_I2C_MUX_PCA9541) += i2c-mux-pca9541.o
obj-$(CONFIG_I2C_MUX_PCA954x) += i2c-mux-pca954x.o
obj-$(CONFIG_I2C_MUX_PINCTRL) += i2c-mux-pinctrl.o
obj-$(CONFIG_I2C_MUX_REG) += i2c-mux-reg.o
ccflags-$(CONFIG_I2C_DEBUG_BUS) := -DDEBUG
......@@ -196,7 +196,8 @@ static int i2c_arbitrator_probe(struct platform_device *pdev)
dev_err(dev, "Cannot parse i2c-parent\n");
return -EINVAL;
}
arb->parent = of_find_i2c_adapter_by_node(parent_np);
arb->parent = of_get_i2c_adapter_by_node(parent_np);
of_node_put(parent_np);
if (!arb->parent) {
dev_err(dev, "Cannot find parent bus\n");
return -EPROBE_DEFER;
......
......@@ -76,6 +76,7 @@ static int i2c_mux_gpio_probe_dt(struct gpiomux *mux,
return -ENODEV;
}
adapter = of_find_i2c_adapter_by_node(adapter_np);
of_node_put(adapter_np);
if (!adapter)
return -EPROBE_DEFER;
......
......@@ -386,7 +386,6 @@ static int pca9541_remove(struct i2c_client *client)
static struct i2c_driver pca9541_driver = {
.driver = {
.name = "pca9541",
.owner = THIS_MODULE,
},
.probe = pca9541_probe,
.remove = pca9541_remove,
......
......@@ -300,7 +300,6 @@ static struct i2c_driver pca954x_driver = {
.driver = {
.name = "pca954x",
.pm = &pca954x_pm,
.owner = THIS_MODULE,
},
.probe = pca954x_probe,
.remove = pca954x_remove,
......
......@@ -111,6 +111,7 @@ static int i2c_mux_pinctrl_parse_dt(struct i2c_mux_pinctrl *mux,
return -ENODEV;
}
adapter = of_find_i2c_adapter_by_node(adapter_np);
of_node_put(adapter_np);
if (!adapter) {
dev_err(mux->dev, "Cannot find parent bus\n");
return -EPROBE_DEFER;
......
/*
* I2C multiplexer using a single register
*
* Copyright 2015 Freescale Semiconductor
* York Sun <yorksun@freescale.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#include <linux/i2c.h>
#include <linux/i2c-mux.h>
#include <linux/init.h>
#include <linux/io.h>
#include <linux/module.h>
#include <linux/of_address.h>
#include <linux/platform_data/i2c-mux-reg.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
struct regmux {
struct i2c_adapter *parent;
struct i2c_adapter **adap; /* child busses */
struct i2c_mux_reg_platform_data data;
};
static int i2c_mux_reg_set(const struct regmux *mux, unsigned int chan_id)
{
if (!mux->data.reg)
return -EINVAL;
/*
* Write to the register, followed by a read to ensure the write is
* completed on a "posted" bus, for example PCI or write buffers.
* The endianness of reading doesn't matter and the return data
* is not used.
*/
switch (mux->data.reg_size) {
case 4:
if (mux->data.little_endian)
iowrite32(chan_id, mux->data.reg);
else
iowrite32be(chan_id, mux->data.reg);
if (!mux->data.write_only)
ioread32(mux->data.reg);
break;
case 2:
if (mux->data.little_endian)
iowrite16(chan_id, mux->data.reg);
else
iowrite16be(chan_id, mux->data.reg);
if (!mux->data.write_only)
ioread16(mux->data.reg);
break;
case 1:
iowrite8(chan_id, mux->data.reg);
if (!mux->data.write_only)
ioread8(mux->data.reg);
break;
}
return 0;
}
static int i2c_mux_reg_select(struct i2c_adapter *adap, void *data,
unsigned int chan)
{
struct regmux *mux = data;
return i2c_mux_reg_set(mux, chan);
}
static int i2c_mux_reg_deselect(struct i2c_adapter *adap, void *data,
unsigned int chan)
{
struct regmux *mux = data;
if (mux->data.idle_in_use)
return i2c_mux_reg_set(mux, mux->data.idle);
return 0;
}
#ifdef CONFIG_OF
static int i2c_mux_reg_probe_dt(struct regmux *mux,
struct platform_device *pdev)
{
struct device_node *np = pdev->dev.of_node;
struct device_node *adapter_np, *child;
struct i2c_adapter *adapter;
struct resource res;
unsigned *values;
int i = 0;
if (!np)
return -ENODEV;
adapter_np = of_parse_phandle(np, "i2c-parent", 0);
if (!adapter_np) {
dev_err(&pdev->dev, "Cannot parse i2c-parent\n");
return -ENODEV;
}
adapter = of_find_i2c_adapter_by_node(adapter_np);
of_node_put(adapter_np);
if (!adapter)
return -EPROBE_DEFER;
mux->parent = adapter;
mux->data.parent = i2c_adapter_id(adapter);
put_device(&adapter->dev);
mux->data.n_values = of_get_child_count(np);
if (of_find_property(np, "little-endian", NULL)) {
mux->data.little_endian = true;
} else if (of_find_property(np, "big-endian", NULL)) {
mux->data.little_endian = false;
} else {
#if defined(__BYTE_ORDER) ? __BYTE_ORDER == __LITTLE_ENDIAN : \
defined(__LITTLE_ENDIAN)
mux->data.little_endian = true;
#elif defined(__BYTE_ORDER) ? __BYTE_ORDER == __BIG_ENDIAN : \
defined(__BIG_ENDIAN)
mux->data.little_endian = false;
#else
#error Endianness not defined?
#endif
}
if (of_find_property(np, "write-only", NULL))
mux->data.write_only = true;
else
mux->data.write_only = false;
values = devm_kzalloc(&pdev->dev,
sizeof(*mux->data.values) * mux->data.n_values,
GFP_KERNEL);
if (!values) {
dev_err(&pdev->dev, "Cannot allocate values array");
return -ENOMEM;
}
for_each_child_of_node(np, child) {
of_property_read_u32(child, "reg", values + i);
i++;
}
mux->data.values = values;
if (!of_property_read_u32(np, "idle-state", &mux->data.idle))
mux->data.idle_in_use = true;
/* map address from "reg" if exists */
if (of_address_to_resource(np, 0, &res)) {
mux->data.reg_size = resource_size(&res);
mux->data.reg = devm_ioremap_resource(&pdev->dev, &res);
if (IS_ERR(mux->data.reg))
return PTR_ERR(mux->data.reg);
}
return 0;
}
#else
static int i2c_mux_reg_probe_dt(struct regmux *mux,
struct platform_device *pdev)
{
return 0;
}
#endif
static int i2c_mux_reg_probe(struct platform_device *pdev)
{
struct regmux *mux;
struct i2c_adapter *parent;
struct resource *res;
int (*deselect)(struct i2c_adapter *, void *, u32);
unsigned int class;
int i, ret, nr;
mux = devm_kzalloc(&pdev->dev, sizeof(*mux), GFP_KERNEL);
if (!mux)
return -ENOMEM;
platform_set_drvdata(pdev, mux);
if (dev_get_platdata(&pdev->dev)) {
memcpy(&mux->data, dev_get_platdata(&pdev->dev),
sizeof(mux->data));
parent = i2c_get_adapter(mux->data.parent);
if (!parent)
return -EPROBE_DEFER;
mux->parent = parent;
} else {
ret = i2c_mux_reg_probe_dt(mux, pdev);
if (ret < 0) {
dev_err(&pdev->dev, "Error parsing device tree");
return ret;
}
}
if (!mux->data.reg) {
dev_info(&pdev->dev,
"Register not set, using platform resource\n");
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
mux->data.reg_size = resource_size(res);
mux->data.reg = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(mux->data.reg))
return PTR_ERR(mux->data.reg);
}
if (mux->data.reg_size != 4 && mux->data.reg_size != 2 &&
mux->data.reg_size != 1) {
dev_err(&pdev->dev, "Invalid register size\n");
return -EINVAL;
}
mux->adap = devm_kzalloc(&pdev->dev,
sizeof(*mux->adap) * mux->data.n_values,
GFP_KERNEL);
if (!mux->adap) {
dev_err(&pdev->dev, "Cannot allocate i2c_adapter structure");
return -ENOMEM;
}
if (mux->data.idle_in_use)
deselect = i2c_mux_reg_deselect;
else
deselect = NULL;
for (i = 0; i < mux->data.n_values; i++) {
nr = mux->data.base_nr ? (mux->data.base_nr + i) : 0;
class = mux->data.classes ? mux->data.classes[i] : 0;
mux->adap[i] = i2c_add_mux_adapter(mux->parent, &pdev->dev, mux,
nr, mux->data.values[i],
class, i2c_mux_reg_select,
deselect);
if (!mux->adap[i]) {
ret = -ENODEV;
dev_err(&pdev->dev, "Failed to add adapter %d\n", i);
goto add_adapter_failed;
}
}
dev_dbg(&pdev->dev, "%d port mux on %s adapter\n",
mux->data.n_values, mux->parent->name);
return 0;
add_adapter_failed:
for (; i > 0; i--)
i2c_del_mux_adapter(mux->adap[i - 1]);
return ret;
}
static int i2c_mux_reg_remove(struct platform_device *pdev)
{
struct regmux *mux = platform_get_drvdata(pdev);
int i;
for (i = 0; i < mux->data.n_values; i++)
i2c_del_mux_adapter(mux->adap[i]);
i2c_put_adapter(mux->parent);
return 0;
}
static const struct of_device_id i2c_mux_reg_of_match[] = {
{ .compatible = "i2c-mux-reg", },
{},
};
MODULE_DEVICE_TABLE(of, i2c_mux_reg_of_match);
static struct platform_driver i2c_mux_reg_driver = {
.probe = i2c_mux_reg_probe,
.remove = i2c_mux_reg_remove,
.driver = {
.name = "i2c-mux-reg",
},
};
module_platform_driver(i2c_mux_reg_driver);
MODULE_DESCRIPTION("Register-based I2C multiplexer driver");
MODULE_AUTHOR("York Sun <yorksun@freescale.com>");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:i2c-mux-reg");
......@@ -186,19 +186,11 @@ static ssize_t at24_eeprom_read(struct at24_data *at24, char *buf,
if (count > io_limit)
count = io_limit;
switch (at24->use_smbus) {
case I2C_SMBUS_I2C_BLOCK_DATA:
if (at24->use_smbus) {
/* Smaller eeproms can work given some SMBus extension calls */
if (count > I2C_SMBUS_BLOCK_MAX)
count = I2C_SMBUS_BLOCK_MAX;
break;
case I2C_SMBUS_WORD_DATA:
count = 2;
break;
case I2C_SMBUS_BYTE_DATA:
count = 1;
break;
default:
} else {
/*
* When we have a better choice than SMBus calls, use a
* combined I2C message. Write address; then read up to
......@@ -229,27 +221,10 @@ static ssize_t at24_eeprom_read(struct at24_data *at24, char *buf,
timeout = jiffies + msecs_to_jiffies(write_timeout);
do {
read_time = jiffies;
switch (at24->use_smbus) {
case I2C_SMBUS_I2C_BLOCK_DATA:
status = i2c_smbus_read_i2c_block_data(client, offset,
if (at24->use_smbus) {
status = i2c_smbus_read_i2c_block_data_or_emulated(client, offset,
count, buf);
break;
case I2C_SMBUS_WORD_DATA:
status = i2c_smbus_read_word_data(client, offset);
if (status >= 0) {
buf[0] = status & 0xff;
buf[1] = status >> 8;
status = count;
}
break;
case I2C_SMBUS_BYTE_DATA:
status = i2c_smbus_read_byte_data(client, offset);
if (status >= 0) {
buf[0] = status;
status = count;
}
break;
default:
} else {
status = i2c_transfer(client->adapter, msg, 2);
if (status == 2)
status = count;
......
......@@ -191,6 +191,7 @@ static const struct i2c_device_id max6875_id[] = {
{ "max6875", 0 },
{ }
};
MODULE_DEVICE_TABLE(i2c, max6875_id);
static struct i2c_driver max6875_driver = {
.driver = {
......
......@@ -432,6 +432,7 @@ int of_irq_get_byname(struct device_node *dev, const char *name)
return of_irq_get(dev, index);
}
EXPORT_SYMBOL_GPL(of_irq_get_byname);
/**
* of_irq_count - Count the number of IRQs a node uses
......
/*
* This header provides constants for I2C bindings
*
* Copyright (C) 2015 by Sang Engineering
* Copyright (C) 2015 by Renesas Electronics Corporation
*
* Wolfram Sang <wsa@sang-engineering.com>
*
* GPLv2 only
*/
#ifndef _DT_BINDINGS_I2C_I2C_H
#define _DT_BINDINGS_I2C_I2C_H
#define I2C_TEN_BIT_ADDRESS (1 << 31)
#define I2C_OWN_SLAVE_ADDRESS (1 << 30)
#endif
......@@ -121,6 +121,9 @@ extern s32 i2c_smbus_read_i2c_block_data(const struct i2c_client *client,
extern s32 i2c_smbus_write_i2c_block_data(const struct i2c_client *client,
u8 command, u8 length,
const u8 *values);
extern s32
i2c_smbus_read_i2c_block_data_or_emulated(const struct i2c_client *client,
u8 command, u8 length, u8 *values);
#endif /* I2C */
/**
......@@ -553,6 +556,7 @@ void i2c_unlock_adapter(struct i2c_adapter *);
#define I2C_CLIENT_PEC 0x04 /* Use Packet Error Checking */
#define I2C_CLIENT_TEN 0x10 /* we have a ten bit chip address */
/* Must equal I2C_M_TEN below */
#define I2C_CLIENT_SLAVE 0x20 /* we are the slave */
#define I2C_CLIENT_WAKE 0x80 /* for board_info; true iff can wake */
#define I2C_CLIENT_SCCB 0x9000 /* Use Omnivision SCCB protocol */
/* Must match I2C_M_STOP|IGNORE_NAK */
......@@ -638,6 +642,8 @@ extern struct i2c_client *of_find_i2c_device_by_node(struct device_node *node);
/* must call put_device() when done with returned i2c_adapter device */
extern struct i2c_adapter *of_find_i2c_adapter_by_node(struct device_node *node);
/* must call i2c_put_adapter() when done with returned i2c_adapter device */
struct i2c_adapter *of_get_i2c_adapter_by_node(struct device_node *node);
#else
static inline struct i2c_client *of_find_i2c_device_by_node(struct device_node *node)
......@@ -649,6 +655,11 @@ static inline struct i2c_adapter *of_find_i2c_adapter_by_node(struct device_node
{
return NULL;
}
static inline struct i2c_adapter *of_get_i2c_adapter_by_node(struct device_node *node)
{
return NULL;
}
#endif /* CONFIG_OF */
#endif /* _LINUX_I2C_H */
/*
* I2C multiplexer using a single register
*
* Copyright 2015 Freescale Semiconductor
* York Sun <yorksun@freescale.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#ifndef __LINUX_PLATFORM_DATA_I2C_MUX_REG_H
#define __LINUX_PLATFORM_DATA_I2C_MUX_REG_H
/**
* struct i2c_mux_reg_platform_data - Platform-dependent data for i2c-mux-reg
* @parent: Parent I2C bus adapter number
* @base_nr: Base I2C bus number to number adapters from or zero for dynamic
* @values: Array of value for each channel
* @n_values: Number of multiplexer channels
* @little_endian: Indicating if the register is in little endian
* @write_only: Reading the register is not allowed by hardware
* @classes: Optional I2C auto-detection classes
* @idle: Value to write to mux when idle
* @idle_in_use: indicate if idle value is in use
* @reg: Virtual address of the register to switch channel
* @reg_size: register size in bytes
*/
struct i2c_mux_reg_platform_data {
int parent;
int base_nr;
const unsigned int *values;
int n_values;
bool little_endian;
bool write_only;
const unsigned int *classes;
u32 idle;
bool idle_in_use;
void __iomem *reg;
resource_size_t reg_size;
};
#endif /* __LINUX_PLATFORM_DATA_I2C_MUX_REG_H */
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment