MIPS: Sibyte: Fix bus watcher build for BCM1x55 and BCM1x80.

  CC      arch/mips/sibyte/bcm1480/bus_watcher.o
  CHK     kernel/config_data.h
arch/mips/sibyte/bcm1480/bus_watcher.c: In function ‘check_bus_watcher’:
arch/mips/sibyte/bcm1480/bus_watcher.c:86:82: error: ‘A_SCD_BUS_ERR_STATUS_DEBUG’ undeclared (first use in this function)
arch/mips/sibyte/bcm1480/bus_watcher.c:86:82: note: each undeclared identifier is reported only once for each function it appears in
make[3]: *** [arch/mips/sibyte/bcm1480/bus_watcher.o] Error 1
make[2]: *** [arch/mips/sibyte/bcm1480] Error 2
make[1]: *** [arch/mips/sibyte] Error 2
make: *** [arch/mips] Error 2

The register moved around though it's otherwise the same but because of
the changed address it now also has a different name.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Patchwork: https://patchwork.linux-mips.org/patch/5514/Reported-by: Markos Chandras <markos.chandras@imgtec.com>

arch/mips/sibyte/common/Makefile

 obj-y := cfe.o
+obj-$(CONFIG_SIBYTE_BUS_WATCHER)	+= bus_watcher.o
 obj-$(CONFIG_SIBYTE_CFE_CONSOLE)	+= cfe_console.o
 obj-$(CONFIG_SIBYTE_TBPROF)		+= sb_tbprof.o

arch/mips/sibyte/sb1250/bus_watcher.c → arch/mips/sibyte/common/bus_watcher.c

@@ -37,6 +37,9 @@
 #include <asm/sibyte/sb1250_regs.h>
 #include <asm/sibyte/sb1250_int.h>
 #include <asm/sibyte/sb1250_scd.h>
+#if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80)
+#include <asm/sibyte/bcm1480_regs.h>
+#endif
 
 
 struct bw_stats_struct {
@@ -81,9 +84,15 @@ void check_bus_watcher(void)
 #ifdef CONFIG_SB1_PASS_1_WORKAROUNDS
 	/* Destructive read, clears register and interrupt */
 	status = csr_in32(IOADDR(A_SCD_BUS_ERR_STATUS));
-#else
+#elif defined(CONFIG_SIBYTE_BCM112X) || defined(CONFIG_SIBYTE_SB1250)
 	/* Use non-destructive register */
 	status = csr_in32(IOADDR(A_SCD_BUS_ERR_STATUS_DEBUG));
+#elif defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80)
+	/* Use non-destructive register */
+	/* Same as 1250 except BUS_ERR_STATUS_DEBUG is in a different place. */
+	status = csr_in32(IOADDR(A_BCM1480_BUS_ERR_STATUS_DEBUG));
+#else
+#error bus watcher being built for unknown Sibyte SOC!
 #endif
 	if (!(status & 0x7fffffff)) {
 		printk("Using last values reaped by bus watcher driver\n");

arch/mips/sibyte/sb1250/Makefile

 obj-y := setup.o irq.o time.o
 
 obj-$(CONFIG_SMP)			+= smp.o
-obj-$(CONFIG_SIBYTE_BUS_WATCHER)	+= bus_watcher.o