drm/bridge: tc358767: Split tc_set_video_mode() into common and (e)DP part

The tc_set_video_mode() sets up both common and (e)DP video mode settings of
the bridge chip. Split the function into tc_set_common_video_mode() to set
the common settings and tc_set_edp_video_mode() to set the (e)DP specific
settings. No functional change.
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Tested-by: Lucas Stach <l.stach@pengutronix.de> # In both DPI to eDP and DSI to DPI mode.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Maxime Ripard <maxime@cerno.tech>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220329085015.39159-11-marex@denx.de

drivers/gpu/drm/bridge/tc358767.c

@@ -734,33 +734,16 @@ static int tc_get_display_props(struct tc_data *tc)
 	return ret;
 }
 
-static int tc_set_video_mode(struct tc_data *tc,
+static int tc_set_common_video_mode(struct tc_data *tc,
 				    const struct drm_display_mode *mode)
 {
-	int ret;
-	int vid_sync_dly;
-	int max_tu_symbol;
-
 	int left_margin = mode->htotal - mode->hsync_end;
 	int right_margin = mode->hsync_start - mode->hdisplay;
 	int hsync_len = mode->hsync_end - mode->hsync_start;
 	int upper_margin = mode->vtotal - mode->vsync_end;
 	int lower_margin = mode->vsync_start - mode->vdisplay;
 	int vsync_len = mode->vsync_end - mode->vsync_start;
-	u32 dp0_syncval;
-	u32 bits_per_pixel = 24;
-	u32 in_bw, out_bw;
-
-	/*
-	 * Recommended maximum number of symbols transferred in a transfer unit:
-	 * DIV_ROUND_UP((input active video bandwidth in bytes) * tu_size,
-	 *              (output active video bandwidth in bytes))
-	 * Must be less than tu_size.
-	 */
-
-	in_bw = mode->clock * bits_per_pixel / 8;
-	out_bw = tc->link.num_lanes * tc->link.rate;
-	max_tu_symbol = DIV_ROUND_UP(in_bw * TU_SIZE_RECOMMENDED, out_bw);
+	int ret;
 
 	dev_dbg(tc->dev, "set mode %dx%d\n",
 		mode->hdisplay, mode->vdisplay);
@@ -818,8 +801,35 @@ static int tc_set_video_mode(struct tc_data *tc,
 			   FIELD_PREP(COLOR_B, 99) |
 			   ENI2CFILTER |
 			   FIELD_PREP(COLOR_BAR_MODE, COLOR_BAR_MODE_BARS));
-	if (ret)
+
 	return ret;
+}
+
+static int tc_set_edp_video_mode(struct tc_data *tc,
+				 const struct drm_display_mode *mode)
+{
+	int ret;
+	int vid_sync_dly;
+	int max_tu_symbol;
+
+	int left_margin = mode->htotal - mode->hsync_end;
+	int hsync_len = mode->hsync_end - mode->hsync_start;
+	int upper_margin = mode->vtotal - mode->vsync_end;
+	int vsync_len = mode->vsync_end - mode->vsync_start;
+	u32 dp0_syncval;
+	u32 bits_per_pixel = 24;
+	u32 in_bw, out_bw;
+
+	/*
+	 * Recommended maximum number of symbols transferred in a transfer unit:
+	 * DIV_ROUND_UP((input active video bandwidth in bytes) * tu_size,
+	 *              (output active video bandwidth in bytes))
+	 * Must be less than tu_size.
+	 */
+
+	in_bw = mode->clock * bits_per_pixel / 8;
+	out_bw = tc->link.num_lanes * tc->link.rate;
+	max_tu_symbol = DIV_ROUND_UP(in_bw * TU_SIZE_RECOMMENDED, out_bw);
 
 	/* DP Main Stream Attributes */
 	vid_sync_dly = hsync_len + left_margin + mode->hdisplay;
@@ -869,10 +879,7 @@ static int tc_set_video_mode(struct tc_data *tc,
 			   FIELD_PREP(MAX_TU_SYMBOL, max_tu_symbol) |
 			   FIELD_PREP(TU_SIZE, TU_SIZE_RECOMMENDED) |
 			   BPC_8);
-	if (ret)
 	return ret;
-
-	return 0;
 }
 
 static int tc_wait_link_training(struct tc_data *tc)
@@ -1185,7 +1192,11 @@ static int tc_edp_stream_enable(struct tc_data *tc)
 			return ret;
 	}
 
-	ret = tc_set_video_mode(tc, &tc->mode);
+	ret = tc_set_common_video_mode(tc, &tc->mode);
+	if (ret)
+		return ret;
+
+	ret = tc_set_edp_video_mode(tc, &tc->mode);
 	if (ret)
 		return ret;