Merge branch 'for-4.11-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata

Pull libata fixes from Tejun Heo:
 "Two libata fixes.

  One to disable hotplug on VT6420 which never worked properly. The
  other reverts an earlier patch which disabled the second port on
  SB600/700. There were some confusions due to earlier datasheets which
  incorrectly indicated that the second port is not implemented on both
  SB600 and 700"

* 'for-4.11-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
  sata_via: Enable hotplug only on VT6421
  Revert "pata_atiixp: Don't use unconnected secondary port on SB600/SB700"

drivers/ata/pata_atiixp.c

@@ -278,11 +278,6 @@ static int atiixp_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 	};
 	const struct ata_port_info *ppi[] = { &info, &info };
 
-	/* SB600/700 don't have secondary port wired */
-	if ((pdev->device == PCI_DEVICE_ID_ATI_IXP600_IDE) ||
-		(pdev->device == PCI_DEVICE_ID_ATI_IXP700_IDE))
-		ppi[1] = &ata_dummy_port_info;
-
 	return ata_pci_bmdma_init_one(pdev, ppi, &atiixp_sht, NULL,
 				      ATA_HOST_PARALLEL_SCAN);
 }

drivers/ata/sata_via.c

@@ -644,6 +644,7 @@ static void svia_configure(struct pci_dev *pdev, int board_id,
 		pci_write_config_byte(pdev, SATA_NATIVE_MODE, tmp8);
 	}
 
+	if (board_id == vt6421) {
 		/* enable IRQ on hotplug */
 		pci_read_config_byte(pdev, SVIA_MISC_3, &tmp8);
 		if ((tmp8 & SATA_HOTPLUG) != SATA_HOTPLUG) {
@@ -653,6 +654,7 @@ static void svia_configure(struct pci_dev *pdev, int board_id,
 			tmp8 |= SATA_HOTPLUG;
 			pci_write_config_byte(pdev, SVIA_MISC_3, tmp8);
 		}
+	}
 
 	/*
 	 * vt6420/1 has problems talking to some drives.  The following