Merge branch 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6

* 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6: (28 commits)
  [S390] rework of channel measurement facility.
  [S390] appldata enhancements.
  [S390] Add vmpanic parameter.
  [S390] add PAV support to the dasd driver.
  [S390] remove export of sys_call_table
  [S390] remove unused macros from binfmt_elf32.c
  [S390] fix duplicate export of overflow{ug}id
  [S390] cio chpid offline.
  [S390] avenrun export in appdata_base.c
  Convert s390_collect_crw_info() in s390mach.c from being started
  [S390] dasd eer data format.
  [S390] preempt_count initialization.
  [S390] head.S code moving.
  [S390] dasd whitespace and other cosmetics.
  [S390] virtual cpu accounting vs. machine checks.
  [S390] add __cpuinit to appldata cpu hotplug notifier.
  [S390] dasd_eckd_dump_sense bug.
  [S390] missing check in dasd_eer_open.
  [S390] modular 3270 driver.
  [S390] console_unblank woes.
  ...

Documentation/kernel-parameters.txt

@@ -1689,9 +1689,14 @@ running once the system is up.
 			decrease the size and leave more room for directly
 			mapped kernel RAM.
 
-	vmhalt=		[KNL,S390]
+	vmhalt=		[KNL,S390] Perform z/VM CP command after system halt.
+			Format: <command>
 
-	vmpoff=		[KNL,S390]
+	vmpanic=	[KNL,S390] Perform z/VM CP command after kernel panic.
+			Format: <command>
+
+	vmpoff=		[KNL,S390] Perform z/VM CP command after power off.
+			Format: <command>
 
 	waveartist=	[HW,OSS]
 			Format: <io>,<irq>,<dma>,<dma2>

arch/s390/appldata/appldata.h

@@ -3,9 +3,9 @@
  *
  * Definitions and interface for Linux - z/VM Monitor Stream.
  *
- * Copyright (C) 2003 IBM Corporation, IBM Deutschland Entwicklung GmbH.
+ * Copyright (C) 2003,2006 IBM Corporation, IBM Deutschland Entwicklung GmbH.
  *
- * Author: Gerald Schaefer <geraldsc@de.ibm.com>
+ * Author: Gerald Schaefer <gerald.schaefer@de.ibm.com>
  */
 
 //#define APPLDATA_DEBUG			/* Debug messages on/off */
@@ -29,6 +29,22 @@
 #define CTL_APPLDATA_NET_SUM	2125
 #define CTL_APPLDATA_PROC	2126
 
+#ifndef CONFIG_64BIT
+
+#define APPLDATA_START_INTERVAL_REC 0x00	/* Function codes for */
+#define APPLDATA_STOP_REC	    0x01	/* DIAG 0xDC	  */
+#define APPLDATA_GEN_EVENT_RECORD   0x02
+#define APPLDATA_START_CONFIG_REC   0x03
+
+#else
+
+#define APPLDATA_START_INTERVAL_REC 0x80
+#define APPLDATA_STOP_REC	    0x81
+#define APPLDATA_GEN_EVENT_RECORD   0x82
+#define APPLDATA_START_CONFIG_REC   0x83
+
+#endif /* CONFIG_64BIT */
+
 #define P_INFO(x...)	printk(KERN_INFO MY_PRINT_NAME " info: " x)
 #define P_ERROR(x...)	printk(KERN_ERR MY_PRINT_NAME " error: " x)
 #define P_WARNING(x...)	printk(KERN_WARNING MY_PRINT_NAME " status: " x)
@@ -53,7 +69,11 @@ struct appldata_ops {
 	void *data;				/* record data */
 	unsigned int size;			/* size of record */
 	struct module *owner;			/* THIS_MODULE */
+	char mod_lvl[2];			/* modification level, EBCDIC */
 };
 
 extern int appldata_register_ops(struct appldata_ops *ops);
 extern void appldata_unregister_ops(struct appldata_ops *ops);
+extern int appldata_diag(char record_nr, u16 function, unsigned long buffer,
+			 u16 length, char *mod_lvl);
+

arch/s390/appldata/appldata_base.c

@@ -5,9 +5,9 @@
  * Exports appldata_register_ops() and appldata_unregister_ops() for the
  * data gathering modules.
  *
- * Copyright (C) 2003 IBM Corporation, IBM Deutschland Entwicklung GmbH.
+ * Copyright (C) 2003,2006 IBM Corporation, IBM Deutschland Entwicklung GmbH.
  *
- * Author: Gerald Schaefer <geraldsc@de.ibm.com>
+ * Author: Gerald Schaefer <gerald.schaefer@de.ibm.com>
  */
 
 #include <linux/config.h>
@@ -40,22 +40,6 @@
 
 #define TOD_MICRO	0x01000			/* nr. of TOD clock units
 						   for 1 microsecond */
-#ifndef CONFIG_64BIT
-
-#define APPLDATA_START_INTERVAL_REC 0x00   	/* Function codes for */
-#define APPLDATA_STOP_REC	    0x01	/* DIAG 0xDC	  */
-#define APPLDATA_GEN_EVENT_RECORD   0x02
-#define APPLDATA_START_CONFIG_REC   0x03
-
-#else
-
-#define APPLDATA_START_INTERVAL_REC 0x80
-#define APPLDATA_STOP_REC   	    0x81
-#define APPLDATA_GEN_EVENT_RECORD   0x82
-#define APPLDATA_START_CONFIG_REC   0x83
-
-#endif /* CONFIG_64BIT */
-
 
 /*
  * Parameter list for DIAGNOSE X'DC'
@@ -195,8 +179,8 @@ static void appldata_work_fn(void *data)
  *
  * prepare parameter list, issue DIAG 0xDC
  */
-static int appldata_diag(char record_nr, u16 function, unsigned long buffer,
-			u16 length)
+int appldata_diag(char record_nr, u16 function, unsigned long buffer,
+			u16 length, char *mod_lvl)
 {
 	unsigned long ry;
 	struct appldata_product_id {
@@ -214,7 +198,7 @@ static int appldata_diag(char record_nr, u16 function, unsigned long buffer,
 		.record_nr  = record_nr,
 		.version_nr = {0xF2, 0xF6},		/* "26" */
 		.release_nr = {0xF0, 0xF1},		/* "01" */
-		.mod_lvl    = {0xF0, 0xF0},		/* "00" */
+		.mod_lvl    = {mod_lvl[0], mod_lvl[1]},
 	};
 	struct appldata_parameter_list appldata_parameter_list = {
 				.diag = 0xDC,
@@ -467,24 +451,25 @@ appldata_generic_handler(ctl_table *ctl, int write, struct file *filp,
 			module_put(ops->owner);
 			return -ENODEV;
 		}
-		ops->active = 1;
 		ops->callback(ops->data);	// init record
 		rc = appldata_diag(ops->record_nr,
 					APPLDATA_START_INTERVAL_REC,
-					(unsigned long) ops->data, ops->size);
+					(unsigned long) ops->data, ops->size,
+					ops->mod_lvl);
 		if (rc != 0) {
 			P_ERROR("START DIAG 0xDC for %s failed, "
 				"return code: %d\n", ops->name, rc);
 			module_put(ops->owner);
-			ops->active = 0;
 		} else {
 			P_INFO("Monitoring %s data enabled, "
 				"DIAG 0xDC started.\n", ops->name);
+			ops->active = 1;
 		}
 	} else if ((buf[0] == '0') && (ops->active == 1)) {
 		ops->active = 0;
 		rc = appldata_diag(ops->record_nr, APPLDATA_STOP_REC,
-				(unsigned long) ops->data, ops->size);
+				(unsigned long) ops->data, ops->size,
+				ops->mod_lvl);
 		if (rc != 0) {
 			P_ERROR("STOP DIAG 0xDC for %s failed, "
 				"return code: %d\n", ops->name, rc);
@@ -633,7 +618,7 @@ appldata_offline_cpu(int cpu)
 	spin_unlock(&appldata_timer_lock);
 }
 
-static int
+static int __cpuinit
 appldata_cpu_notify(struct notifier_block *self,
 		    unsigned long action, void *hcpu)
 {
@@ -710,7 +695,8 @@ static void __exit appldata_exit(void)
 	list_for_each(lh, &appldata_ops_list) {
 		ops = list_entry(lh, struct appldata_ops, list);
 		rc = appldata_diag(ops->record_nr, APPLDATA_STOP_REC,
-				(unsigned long) ops->data, ops->size);
+				(unsigned long) ops->data, ops->size,
+				ops->mod_lvl);
 		if (rc != 0) {
 			P_ERROR("STOP DIAG 0xDC for %s failed, "
 				"return code: %d\n", ops->name, rc);
@@ -739,6 +725,7 @@ MODULE_DESCRIPTION("Linux-VM Monitor Stream, base infrastructure");
 
 EXPORT_SYMBOL_GPL(appldata_register_ops);
 EXPORT_SYMBOL_GPL(appldata_unregister_ops);
+EXPORT_SYMBOL_GPL(appldata_diag);
 
 #ifdef MODULE
 /*
@@ -779,7 +766,6 @@ unsigned long nr_iowait(void)
 #endif /* MODULE */
 EXPORT_SYMBOL_GPL(si_swapinfo);
 EXPORT_SYMBOL_GPL(nr_threads);
-EXPORT_SYMBOL_GPL(avenrun);
 EXPORT_SYMBOL_GPL(get_full_page_state);
 EXPORT_SYMBOL_GPL(nr_running);
 EXPORT_SYMBOL_GPL(nr_iowait);

arch/s390/appldata/appldata_mem.c

@@ -4,9 +4,9 @@
  * Data gathering module for Linux-VM Monitor Stream, Stage 1.
  * Collects data related to memory management.
  *
- * Copyright (C) 2003 IBM Corporation, IBM Deutschland Entwicklung GmbH.
+ * Copyright (C) 2003,2006 IBM Corporation, IBM Deutschland Entwicklung GmbH.
  *
- * Author: Gerald Schaefer <geraldsc@de.ibm.com>
+ * Author: Gerald Schaefer <gerald.schaefer@de.ibm.com>
  */
 
 #include <linux/config.h>
@@ -152,6 +152,7 @@ static struct appldata_ops ops = {
 	.callback  = &appldata_get_mem_data,
 	.data      = &appldata_mem_data,
 	.owner     = THIS_MODULE,
+	.mod_lvl   = {0xF0, 0xF0},		/* EBCDIC "00" */
 };
 
 

arch/s390/appldata/appldata_net_sum.c

@@ -5,9 +5,9 @@
  * Collects accumulated network statistics (Packets received/transmitted,
  * dropped, errors, ...).
  *
- * Copyright (C) 2003 IBM Corporation, IBM Deutschland Entwicklung GmbH.
+ * Copyright (C) 2003,2006 IBM Corporation, IBM Deutschland Entwicklung GmbH.
  *
- * Author: Gerald Schaefer <geraldsc@de.ibm.com>
+ * Author: Gerald Schaefer <gerald.schaefer@de.ibm.com>
  */
 
 #include <linux/config.h>
@@ -152,6 +152,7 @@ static struct appldata_ops ops = {
 	.callback  = &appldata_get_net_sum_data,
 	.data      = &appldata_net_sum_data,
 	.owner     = THIS_MODULE,
+	.mod_lvl   = {0xF0, 0xF0},		/* EBCDIC "00" */
 };
 
 

arch/s390/appldata/appldata_os.c

@@ -4,9 +4,9 @@
  * Data gathering module for Linux-VM Monitor Stream, Stage 1.
  * Collects misc. OS related data (CPU utilization, running processes).
  *
- * Copyright (C) 2003 IBM Corporation, IBM Deutschland Entwicklung GmbH.
+ * Copyright (C) 2003,2006 IBM Corporation, IBM Deutschland Entwicklung GmbH.
  *
- * Author: Gerald Schaefer <geraldsc@de.ibm.com>
+ * Author: Gerald Schaefer <gerald.schaefer@de.ibm.com>
  */
 
 #include <linux/config.h>
@@ -44,11 +44,14 @@ struct appldata_os_per_cpu {
 	u32 per_cpu_system;	/* ... spent in kernel mode         */
 	u32 per_cpu_idle;	/* ... spent in idle mode           */
 
-// New in 2.6 -->
+	/* New in 2.6 */
 	u32 per_cpu_irq;	/* ... spent in interrupts          */
 	u32 per_cpu_softirq;	/* ... spent in softirqs            */
 	u32 per_cpu_iowait;	/* ... spent while waiting for I/O  */
-// <-- New in 2.6
+
+	/* New in modification level 01 */
+	u32 per_cpu_steal;	/* ... stolen by hypervisor	    */
+	u32 cpu_id;		/* number of this CPU		    */
 } __attribute__((packed));
 
 struct appldata_os_data {
@@ -68,10 +71,9 @@ struct appldata_os_data {
 	u32 avenrun[3];		/* average nr. of running processes during */
 				/* the last 1, 5 and 15 minutes */
 
-// New in 2.6 -->
+	/* New in 2.6 */
 	u32 nr_iowait;		/* number of blocked threads
 				   (waiting for I/O)               */
-// <-- New in 2.6
 
 	/* per cpu data */
 	struct appldata_os_per_cpu os_cpu[0];
@@ -79,6 +81,14 @@ struct appldata_os_data {
 
 static struct appldata_os_data *appldata_os_data;
 
+static struct appldata_ops ops = {
+	.ctl_nr    = CTL_APPLDATA_OS,
+	.name	   = "os",
+	.record_nr = APPLDATA_RECORD_OS_ID,
+	.owner	   = THIS_MODULE,
+	.mod_lvl   = {0xF0, 0xF1},		/* EBCDIC "01" */
+};
+
 
 static inline void appldata_print_debug(struct appldata_os_data *os_data)
 {
@@ -100,15 +110,17 @@ static inline void appldata_print_debug(struct appldata_os_data *os_data)
 	P_DEBUG("nr_cpus = %u\n", os_data->nr_cpus);
 	for (i = 0; i < os_data->nr_cpus; i++) {
 		P_DEBUG("cpu%u : user = %u, nice = %u, system = %u, "
-			"idle = %u, irq = %u, softirq = %u, iowait = %u\n",
-				i,
+			"idle = %u, irq = %u, softirq = %u, iowait = %u, "
+			"steal = %u\n",
+				os_data->os_cpu[i].cpu_id,
 				os_data->os_cpu[i].per_cpu_user,
 				os_data->os_cpu[i].per_cpu_nice,
 				os_data->os_cpu[i].per_cpu_system,
 				os_data->os_cpu[i].per_cpu_idle,
 				os_data->os_cpu[i].per_cpu_irq,
 				os_data->os_cpu[i].per_cpu_softirq,
-				os_data->os_cpu[i].per_cpu_iowait);
+				os_data->os_cpu[i].per_cpu_iowait,
+				os_data->os_cpu[i].per_cpu_steal);
 	}
 
 	P_DEBUG("sync_count_1 = %u\n", os_data->sync_count_1);
@@ -123,14 +135,13 @@ static inline void appldata_print_debug(struct appldata_os_data *os_data)
  */
 static void appldata_get_os_data(void *data)
 {
-	int i, j;
+	int i, j, rc;
 	struct appldata_os_data *os_data;
+	unsigned int new_size;
 
 	os_data = data;
 	os_data->sync_count_1++;
 
-	os_data->nr_cpus = num_online_cpus();
-
 	os_data->nr_threads = nr_threads;
 	os_data->nr_running = nr_running();
 	os_data->nr_iowait  = nr_iowait();
@@ -154,9 +165,44 @@ static void appldata_get_os_data(void *data)
 			cputime_to_jiffies(kstat_cpu(i).cpustat.softirq);
 		os_data->os_cpu[j].per_cpu_iowait =
 			cputime_to_jiffies(kstat_cpu(i).cpustat.iowait);
+		os_data->os_cpu[j].per_cpu_steal =
+			cputime_to_jiffies(kstat_cpu(i).cpustat.steal);
+		os_data->os_cpu[j].cpu_id = i;
 		j++;
 	}
 
+	os_data->nr_cpus = j;
+
+	new_size = sizeof(struct appldata_os_data) +
+		   (os_data->nr_cpus * sizeof(struct appldata_os_per_cpu));
+	if (ops.size != new_size) {
+		if (ops.active) {
+			rc = appldata_diag(APPLDATA_RECORD_OS_ID,
+					   APPLDATA_START_INTERVAL_REC,
+					   (unsigned long) ops.data, new_size,
+					   ops.mod_lvl);
+			if (rc != 0) {
+				P_ERROR("os: START NEW DIAG 0xDC failed, "
+					"return code: %d, new size = %i\n", rc,
+					new_size);
+				P_INFO("os: stopping old record now\n");
+			} else
+				P_INFO("os: new record size = %i\n", new_size);
+
+			rc = appldata_diag(APPLDATA_RECORD_OS_ID,
+					   APPLDATA_STOP_REC,
+					   (unsigned long) ops.data, ops.size,
+					   ops.mod_lvl);
+			if (rc != 0)
+				P_ERROR("os: STOP OLD DIAG 0xDC failed, "
+					"return code: %d, old size = %i\n", rc,
+					ops.size);
+			else
+				P_INFO("os: old record size = %i stopped\n",
+					ops.size);
+		}
+		ops.size = new_size;
+	}
 	os_data->timestamp = get_clock();
 	os_data->sync_count_2++;
 #ifdef APPLDATA_DEBUG
@@ -165,15 +211,6 @@ static void appldata_get_os_data(void *data)
 }
 
 
-static struct appldata_ops ops = {
-	.ctl_nr    = CTL_APPLDATA_OS,
-	.name	   = "os",
-	.record_nr = APPLDATA_RECORD_OS_ID,
-	.callback  = &appldata_get_os_data,
-	.owner     = THIS_MODULE,
-};
-
-
 /*
  * appldata_os_init()
  *
@@ -181,26 +218,25 @@ static struct appldata_ops ops = {
  */
 static int __init appldata_os_init(void)
 {
-	int rc, size;
+	int rc, max_size;
 
-	size = sizeof(struct appldata_os_data) +
+	max_size = sizeof(struct appldata_os_data) +
 		   (NR_CPUS * sizeof(struct appldata_os_per_cpu));
-	if (size > APPLDATA_MAX_REC_SIZE) {
-		P_ERROR("Size of record = %i, bigger than maximum (%i)!\n",
-			size, APPLDATA_MAX_REC_SIZE);
+	if (max_size > APPLDATA_MAX_REC_SIZE) {
+		P_ERROR("Max. size of OS record = %i, bigger than maximum "
+			"record size (%i)\n", max_size, APPLDATA_MAX_REC_SIZE);
 		rc = -ENOMEM;
 		goto out;
 	}
-	P_DEBUG("sizeof(os) = %i, sizeof(os_cpu) = %lu\n", size,
+	P_DEBUG("max. sizeof(os) = %i, sizeof(os_cpu) = %lu\n", max_size,
 		sizeof(struct appldata_os_per_cpu));
 
-	appldata_os_data = kmalloc(size, GFP_DMA);
+	appldata_os_data = kzalloc(max_size, GFP_DMA);
 	if (appldata_os_data == NULL) {
 		P_ERROR("No memory for %s!\n", ops.name);
 		rc = -ENOMEM;
 		goto out;
 	}
-	memset(appldata_os_data, 0, size);
 
 	appldata_os_data->per_cpu_size = sizeof(struct appldata_os_per_cpu);
 	appldata_os_data->cpu_offset   = offsetof(struct appldata_os_data,
@@ -208,7 +244,7 @@ static int __init appldata_os_init(void)
 	P_DEBUG("cpu offset = %u\n", appldata_os_data->cpu_offset);
 
 	ops.data = appldata_os_data;
-	ops.size = size;
+	ops.callback  = &appldata_get_os_data;
 	rc = appldata_register_ops(&ops);
 	if (rc != 0) {
 		P_ERROR("Error registering ops, rc = %i\n", rc);

arch/s390/kernel/binfmt_elf32.c

@@ -177,11 +177,6 @@ struct elf_prpsinfo32
 
 #include <linux/highuid.h>
 
-#undef NEW_TO_OLD_UID
-#undef NEW_TO_OLD_GID
-#define NEW_TO_OLD_UID(uid) ((uid) > 65535) ? (u16)overflowuid : (u16)(uid)
-#define NEW_TO_OLD_GID(gid) ((gid) > 65535) ? (u16)overflowgid : (u16)(gid) 
-
 #define elf_addr_t	u32
 /*
 #define init_elf_binfmt init_elf32_binfmt

arch/s390/kernel/entry.S

@@ -93,13 +93,22 @@ STACK_SIZE  = 1 << STACK_SHIFT
 	l	%r13,__LC_SVC_NEW_PSW+4	# load &system_call to %r13
 	.endm
 
-	.macro	SAVE_ALL psworg,savearea,sync
+	.macro	SAVE_ALL_SYNC psworg,savearea
 	la	%r12,\psworg
-	.if	\sync
 	tm	\psworg+1,0x01		# test problem state bit
 	bz	BASED(2f)		# skip stack setup save
 	l	%r15,__LC_KERNEL_STACK	# problem state -> load ksp
-	.else
+#ifdef CONFIG_CHECK_STACK
+	b	BASED(3f)
+2:	tml	%r15,STACK_SIZE - CONFIG_STACK_GUARD
+	bz	BASED(stack_overflow)
+3:
+#endif
+2:
+	.endm
+
+	.macro	SAVE_ALL_ASYNC psworg,savearea
+	la	%r12,\psworg
 	tm	\psworg+1,0x01		# test problem state bit
 	bnz	BASED(1f)		# from user -> load async stack
 	clc	\psworg+4(4),BASED(.Lcritical_end)
@@ -115,7 +124,6 @@ STACK_SIZE  = 1 << STACK_SHIFT
 	sra	%r14,STACK_SHIFT
 	be	BASED(2f)
 1:	l	%r15,__LC_ASYNC_STACK
-	.endif
 #ifdef CONFIG_CHECK_STACK
 	b	BASED(3f)
 2:	tml	%r15,STACK_SIZE - CONFIG_STACK_GUARD
@@ -196,7 +204,7 @@ system_call:
 	STORE_TIMER __LC_SYNC_ENTER_TIMER
 sysc_saveall:
 	SAVE_ALL_BASE __LC_SAVE_AREA
-        SAVE_ALL __LC_SVC_OLD_PSW,__LC_SAVE_AREA,1
+	SAVE_ALL_SYNC __LC_SVC_OLD_PSW,__LC_SAVE_AREA
 	CREATE_STACK_FRAME __LC_SVC_OLD_PSW,__LC_SAVE_AREA
 	lh	%r7,0x8a	  # get svc number from lowcore
 #ifdef CONFIG_VIRT_CPU_ACCOUNTING
@@ -425,7 +433,7 @@ pgm_check_handler:
 	SAVE_ALL_BASE __LC_SAVE_AREA
         tm      __LC_PGM_INT_CODE+1,0x80 # check whether we got a per exception
         bnz     BASED(pgm_per)           # got per exception -> special case
-	SAVE_ALL __LC_PGM_OLD_PSW,__LC_SAVE_AREA,1
+	SAVE_ALL_SYNC __LC_PGM_OLD_PSW,__LC_SAVE_AREA
 	CREATE_STACK_FRAME __LC_PGM_OLD_PSW,__LC_SAVE_AREA
 #ifdef CONFIG_VIRT_CPU_ACCOUNTING
 	tm	SP_PSW+1(%r15),0x01	# interrupting from user ?
@@ -464,7 +472,7 @@ pgm_per:
 # Normal per exception
 #
 pgm_per_std:
-	SAVE_ALL __LC_PGM_OLD_PSW,__LC_SAVE_AREA,1
+	SAVE_ALL_SYNC __LC_PGM_OLD_PSW,__LC_SAVE_AREA
 	CREATE_STACK_FRAME __LC_PGM_OLD_PSW,__LC_SAVE_AREA
 #ifdef CONFIG_VIRT_CPU_ACCOUNTING
 	tm	SP_PSW+1(%r15),0x01	# interrupting from user ?
@@ -490,7 +498,7 @@ pgm_no_vtime2:
 # it was a single stepped SVC that is causing all the trouble
 #
 pgm_svcper:
-	SAVE_ALL __LC_SVC_OLD_PSW,__LC_SAVE_AREA,1
+	SAVE_ALL_SYNC __LC_SVC_OLD_PSW,__LC_SAVE_AREA
 	CREATE_STACK_FRAME __LC_SVC_OLD_PSW,__LC_SAVE_AREA
 #ifdef CONFIG_VIRT_CPU_ACCOUNTING
 	tm	SP_PSW+1(%r15),0x01	# interrupting from user ?
@@ -519,7 +527,7 @@ io_int_handler:
 	STORE_TIMER __LC_ASYNC_ENTER_TIMER
 	stck	__LC_INT_CLOCK
 	SAVE_ALL_BASE __LC_SAVE_AREA+16
-        SAVE_ALL __LC_IO_OLD_PSW,__LC_SAVE_AREA+16,0
+	SAVE_ALL_ASYNC __LC_IO_OLD_PSW,__LC_SAVE_AREA+16
 	CREATE_STACK_FRAME __LC_IO_OLD_PSW,__LC_SAVE_AREA+16
 #ifdef CONFIG_VIRT_CPU_ACCOUNTING
 	tm	SP_PSW+1(%r15),0x01	# interrupting from user ?
@@ -631,7 +639,7 @@ ext_int_handler:
 	STORE_TIMER __LC_ASYNC_ENTER_TIMER
 	stck	__LC_INT_CLOCK
 	SAVE_ALL_BASE __LC_SAVE_AREA+16
-        SAVE_ALL __LC_EXT_OLD_PSW,__LC_SAVE_AREA+16,0
+	SAVE_ALL_ASYNC __LC_EXT_OLD_PSW,__LC_SAVE_AREA+16
 	CREATE_STACK_FRAME __LC_EXT_OLD_PSW,__LC_SAVE_AREA+16
 #ifdef CONFIG_VIRT_CPU_ACCOUNTING
 	tm	SP_PSW+1(%r15),0x01	# interrupting from user ?
@@ -657,21 +665,31 @@ __critical_end:
         .globl mcck_int_handler
 mcck_int_handler:
 	spt	__LC_CPU_TIMER_SAVE_AREA	# revalidate cpu timer
-	mvc	__LC_ASYNC_ENTER_TIMER(8),__LC_CPU_TIMER_SAVE_AREA
 	lm	%r0,%r15,__LC_GPREGS_SAVE_AREA	# revalidate gprs
 	SAVE_ALL_BASE __LC_SAVE_AREA+32
 	la	%r12,__LC_MCK_OLD_PSW
 	tm	__LC_MCCK_CODE,0x80     # system damage?
 	bo	BASED(mcck_int_main)	# yes -> rest of mcck code invalid
-	tm	__LC_MCCK_CODE+5,0x02   # stored cpu timer value valid?
-	bo	BASED(0f)
-	spt	__LC_LAST_UPDATE_TIMER	# revalidate cpu timer
 #ifdef CONFIG_VIRT_CPU_ACCOUNTING
-	mvc	__LC_ASYNC_ENTER_TIMER(8),__LC_LAST_UPDATE_TIMER
-	mvc	__LC_SYNC_ENTER_TIMER(8),__LC_LAST_UPDATE_TIMER
-	mvc	__LC_EXIT_TIMER(8),__LC_LAST_UPDATE_TIMER
+	mvc	__LC_SAVE_AREA+52(8),__LC_ASYNC_ENTER_TIMER
+	mvc	__LC_ASYNC_ENTER_TIMER(8),__LC_CPU_TIMER_SAVE_AREA
+	tm	__LC_MCCK_CODE+5,0x02	# stored cpu timer value valid?
+	bo	BASED(1f)
+	la	%r14,__LC_SYNC_ENTER_TIMER
+	clc	0(8,%r14),__LC_ASYNC_ENTER_TIMER
+	bl	BASED(0f)
+	la	%r14,__LC_ASYNC_ENTER_TIMER
+0:	clc	0(8,%r14),__LC_EXIT_TIMER
+	bl	BASED(0f)
+	la	%r14,__LC_EXIT_TIMER
+0:	clc	0(8,%r14),__LC_LAST_UPDATE_TIMER
+	bl	BASED(0f)
+	la	%r14,__LC_LAST_UPDATE_TIMER
+0:	spt	0(%r14)
+	mvc	__LC_ASYNC_ENTER_TIMER(8),0(%r14)
+1:
 #endif
-0:	tm	__LC_MCCK_CODE+2,0x09   # mwp + ia of old psw valid?
+	tm	__LC_MCCK_CODE+2,0x09	# mwp + ia of old psw valid?
 	bno	BASED(mcck_int_main)	# no -> skip cleanup critical
 	tm	__LC_MCK_OLD_PSW+1,0x01	# test problem state bit
 	bnz	BASED(mcck_int_main)	# from user -> load async stack
@@ -691,7 +709,7 @@ mcck_int_main:
 #ifdef CONFIG_VIRT_CPU_ACCOUNTING
 	tm	__LC_MCCK_CODE+2,0x08   # mwp of old psw valid?
 	bno	BASED(mcck_no_vtime)	# no -> skip cleanup critical
-	tm	__LC_MCK_OLD_PSW+1,0x01 # interrupting from user ?
+	tm	SP_PSW+1(%r15),0x01	# interrupting from user ?
 	bz	BASED(mcck_no_vtime)
 	UPDATE_VTIME __LC_EXIT_TIMER,__LC_ASYNC_ENTER_TIMER,__LC_USER_TIMER
 	UPDATE_VTIME __LC_LAST_UPDATE_TIMER,__LC_EXIT_TIMER,__LC_SYSTEM_TIMER
@@ -715,6 +733,20 @@ mcck_no_vtime:
 	l	%r1,BASED(.Ls390_handle_mcck)
 	basr	%r14,%r1		# call machine check handler
 mcck_return:
+	mvc	__LC_RETURN_MCCK_PSW(8),SP_PSW(%r15) # move return PSW
+	ni	__LC_RETURN_MCCK_PSW+1,0xfd # clear wait state bit
+#ifdef CONFIG_VIRT_CPU_ACCOUNTING
+	mvc	__LC_ASYNC_ENTER_TIMER(8),__LC_SAVE_AREA+52
+	tm	__LC_RETURN_MCCK_PSW+1,0x01 # returning to user ?
+	bno	BASED(0f)
+	lm	%r0,%r15,SP_R0(%r15)	# load gprs 0-15
+	stpt	__LC_EXIT_TIMER
+	lpsw	__LC_RETURN_MCCK_PSW	# back to caller
+0:
+#endif
+	lm	%r0,%r15,SP_R0(%r15)	# load gprs 0-15
+	lpsw	__LC_RETURN_MCCK_PSW	# back to caller
+
         RESTORE_ALL __LC_RETURN_MCCK_PSW,0
 
 #ifdef CONFIG_SMP
@@ -781,6 +813,8 @@ cleanup_table_sysc_leave:
 	.long	sysc_leave + 0x80000000, sysc_work_loop + 0x80000000
 cleanup_table_sysc_work_loop:
 	.long	sysc_work_loop + 0x80000000, sysc_reschedule + 0x80000000
+cleanup_table_io_return:
+	.long	io_return + 0x80000000, io_leave + 0x80000000
 cleanup_table_io_leave:
 	.long	io_leave + 0x80000000, io_done + 0x80000000
 cleanup_table_io_work_loop:
@@ -806,6 +840,11 @@ cleanup_critical:
 	bl	BASED(0f)
 	clc	4(4,%r12),BASED(cleanup_table_sysc_work_loop+4)
 	bl	BASED(cleanup_sysc_return)
+0:
+	clc	4(4,%r12),BASED(cleanup_table_io_return)
+	bl	BASED(0f)
+	clc	4(4,%r12),BASED(cleanup_table_io_return+4)
+	bl	BASED(cleanup_io_return)
 0:
 	clc	4(4,%r12),BASED(cleanup_table_io_leave)
 	bl	BASED(0f)
@@ -839,7 +878,7 @@ cleanup_system_call:
 	mvc	__LC_SAVE_AREA(16),0(%r12)
 0:	st	%r13,4(%r12)
 	st	%r12,__LC_SAVE_AREA+48	# argh
-	SAVE_ALL __LC_SVC_OLD_PSW,__LC_SAVE_AREA,1
+	SAVE_ALL_SYNC __LC_SVC_OLD_PSW,__LC_SAVE_AREA
 	CREATE_STACK_FRAME __LC_SVC_OLD_PSW,__LC_SAVE_AREA
 	l	%r12,__LC_SAVE_AREA+48	# argh
 	st	%r15,12(%r12)
@@ -980,7 +1019,6 @@ cleanup_io_leave_insn:
                .long  cleanup_critical
 
 #define SYSCALL(esa,esame,emu)	.long esa
-	.globl  sys_call_table
 sys_call_table:
 #include "syscalls.S"
 #undef SYSCALL

arch/s390/kernel/entry64.S

@@ -87,13 +87,22 @@ _TIF_WORK_INT = (_TIF_SIGPENDING | _TIF_RESTORE_SIGMASK | _TIF_NEED_RESCHED | \
 	larl	%r13,system_call
 	.endm
 
-        .macro  SAVE_ALL psworg,savearea,sync
+	.macro	SAVE_ALL_SYNC psworg,savearea
 	la	%r12,\psworg
-	.if	\sync
 	tm	\psworg+1,0x01		# test problem state bit
 	jz	2f			# skip stack setup save
 	lg	%r15,__LC_KERNEL_STACK	# problem state -> load ksp
-	.else
+#ifdef CONFIG_CHECK_STACK
+	j	3f
+2:	tml	%r15,STACK_SIZE - CONFIG_STACK_GUARD
+	jz	stack_overflow
+3:
+#endif
+2:
+	.endm
+
+	.macro	SAVE_ALL_ASYNC psworg,savearea
+	la	%r12,\psworg
 	tm	\psworg+1,0x01		# test problem state bit
 	jnz	1f			# from user -> load kernel stack
 	clc	\psworg+8(8),BASED(.Lcritical_end)
@@ -108,7 +117,6 @@ _TIF_WORK_INT = (_TIF_SIGPENDING | _TIF_RESTORE_SIGMASK | _TIF_NEED_RESCHED | \
 	srag	%r14,%r14,STACK_SHIFT
 	jz	2f
 1:	lg	%r15,__LC_ASYNC_STACK	# load async stack
-	.endif
 #ifdef CONFIG_CHECK_STACK
 	j	3f
 2:	tml	%r15,STACK_SIZE - CONFIG_STACK_GUARD
@@ -187,7 +195,7 @@ system_call:
 	STORE_TIMER __LC_SYNC_ENTER_TIMER
 sysc_saveall:
 	SAVE_ALL_BASE __LC_SAVE_AREA
-        SAVE_ALL __LC_SVC_OLD_PSW,__LC_SAVE_AREA,1
+	SAVE_ALL_SYNC __LC_SVC_OLD_PSW,__LC_SAVE_AREA
         CREATE_STACK_FRAME __LC_SVC_OLD_PSW,__LC_SAVE_AREA
 	llgh    %r7,__LC_SVC_INT_CODE # get svc number from lowcore
 #ifdef CONFIG_VIRT_CPU_ACCOUNTING
@@ -446,7 +454,7 @@ pgm_check_handler:
 	SAVE_ALL_BASE __LC_SAVE_AREA
         tm      __LC_PGM_INT_CODE+1,0x80 # check whether we got a per exception
         jnz     pgm_per                  # got per exception -> special case
-	SAVE_ALL __LC_PGM_OLD_PSW,__LC_SAVE_AREA,1
+	SAVE_ALL_SYNC __LC_PGM_OLD_PSW,__LC_SAVE_AREA
 	CREATE_STACK_FRAME __LC_PGM_OLD_PSW,__LC_SAVE_AREA
 #ifdef CONFIG_VIRT_CPU_ACCOUNTING
 	tm	SP_PSW+1(%r15),0x01	# interrupting from user ?
@@ -485,7 +493,7 @@ pgm_per:
 # Normal per exception
 #
 pgm_per_std:
-	SAVE_ALL __LC_PGM_OLD_PSW,__LC_SAVE_AREA,1
+	SAVE_ALL_SYNC __LC_PGM_OLD_PSW,__LC_SAVE_AREA
 	CREATE_STACK_FRAME __LC_PGM_OLD_PSW,__LC_SAVE_AREA
 #ifdef CONFIG_VIRT_CPU_ACCOUNTING
 	tm	SP_PSW+1(%r15),0x01	# interrupting from user ?
@@ -511,7 +519,7 @@ pgm_no_vtime2:
 # it was a single stepped SVC that is causing all the trouble
 #
 pgm_svcper:
-	SAVE_ALL __LC_SVC_OLD_PSW,__LC_SAVE_AREA,1
+	SAVE_ALL_SYNC __LC_SVC_OLD_PSW,__LC_SAVE_AREA
 	CREATE_STACK_FRAME __LC_SVC_OLD_PSW,__LC_SAVE_AREA
 #ifdef CONFIG_VIRT_CPU_ACCOUNTING
 	tm	SP_PSW+1(%r15),0x01	# interrupting from user ?
@@ -539,7 +547,7 @@ io_int_handler:
 	STORE_TIMER __LC_ASYNC_ENTER_TIMER
 	stck	__LC_INT_CLOCK
 	SAVE_ALL_BASE __LC_SAVE_AREA+32
-        SAVE_ALL __LC_IO_OLD_PSW,__LC_SAVE_AREA+32,0
+	SAVE_ALL_ASYNC __LC_IO_OLD_PSW,__LC_SAVE_AREA+32
 	CREATE_STACK_FRAME __LC_IO_OLD_PSW,__LC_SAVE_AREA+32
 #ifdef CONFIG_VIRT_CPU_ACCOUNTING
 	tm	SP_PSW+1(%r15),0x01	# interrupting from user ?
@@ -647,7 +655,7 @@ ext_int_handler:
 	STORE_TIMER __LC_ASYNC_ENTER_TIMER
 	stck	__LC_INT_CLOCK
 	SAVE_ALL_BASE __LC_SAVE_AREA+32
-        SAVE_ALL __LC_EXT_OLD_PSW,__LC_SAVE_AREA+32,0
+	SAVE_ALL_ASYNC __LC_EXT_OLD_PSW,__LC_SAVE_AREA+32
 	CREATE_STACK_FRAME __LC_EXT_OLD_PSW,__LC_SAVE_AREA+32
 #ifdef CONFIG_VIRT_CPU_ACCOUNTING
 	tm	SP_PSW+1(%r15),0x01	# interrupting from user ?
@@ -672,21 +680,32 @@ __critical_end:
 mcck_int_handler:
 	la	%r1,4095		# revalidate r1
 	spt	__LC_CPU_TIMER_SAVE_AREA-4095(%r1)	# revalidate cpu timer
-	mvc	__LC_ASYNC_ENTER_TIMER(8),__LC_CPU_TIMER_SAVE_AREA-4095(%r1)
   	lmg     %r0,%r15,__LC_GPREGS_SAVE_AREA-4095(%r1)# revalidate gprs
 	SAVE_ALL_BASE __LC_SAVE_AREA+64
 	la	%r12,__LC_MCK_OLD_PSW
 	tm	__LC_MCCK_CODE,0x80     # system damage?
 	jo	mcck_int_main		# yes -> rest of mcck code invalid
-	tm	__LC_MCCK_CODE+5,0x02   # stored cpu timer value valid?
-	jo	0f
-	spt	__LC_LAST_UPDATE_TIMER
 #ifdef CONFIG_VIRT_CPU_ACCOUNTING
-	mvc	__LC_ASYNC_ENTER_TIMER(8),__LC_LAST_UPDATE_TIMER
-	mvc	__LC_SYNC_ENTER_TIMER(8),__LC_LAST_UPDATE_TIMER
-	mvc	__LC_EXIT_TIMER(8),__LC_LAST_UPDATE_TIMER
+	la	%r14,4095
+	mvc	__LC_SAVE_AREA+104(8),__LC_ASYNC_ENTER_TIMER
+	mvc	__LC_ASYNC_ENTER_TIMER(8),__LC_CPU_TIMER_SAVE_AREA-4095(%r14)
+	tm	__LC_MCCK_CODE+5,0x02	# stored cpu timer value valid?
+	jo	1f
+	la	%r14,__LC_SYNC_ENTER_TIMER
+	clc	0(8,%r14),__LC_ASYNC_ENTER_TIMER
+	jl	0f
+	la	%r14,__LC_ASYNC_ENTER_TIMER
+0:	clc	0(8,%r14),__LC_EXIT_TIMER
+	jl	0f
+	la	%r14,__LC_EXIT_TIMER
+0:	clc	0(8,%r14),__LC_LAST_UPDATE_TIMER
+	jl	0f
+	la	%r14,__LC_LAST_UPDATE_TIMER
+0:	spt	0(%r14)
+	mvc	__LC_ASYNC_ENTER_TIMER(8),0(%r14)
+1:
 #endif
-0:	tm	__LC_MCCK_CODE+2,0x09   # mwp + ia of old psw valid?
+	tm	__LC_MCCK_CODE+2,0x09	# mwp + ia of old psw valid?
 	jno	mcck_int_main		# no -> skip cleanup critical
 	tm      __LC_MCK_OLD_PSW+1,0x01 # test problem state bit
 	jnz	mcck_int_main		# from user -> load kernel stack
@@ -705,7 +724,7 @@ mcck_int_main:
 #ifdef CONFIG_VIRT_CPU_ACCOUNTING
 	tm	__LC_MCCK_CODE+2,0x08	# mwp of old psw valid?
 	jno	mcck_no_vtime		# no -> no timer update
-	tm      __LC_MCK_OLD_PSW+1,0x01 # interrupting from user ?
+	tm	SP_PSW+1(%r15),0x01	# interrupting from user ?
 	jz	mcck_no_vtime
 	UPDATE_VTIME __LC_EXIT_TIMER,__LC_ASYNC_ENTER_TIMER,__LC_USER_TIMER
 	UPDATE_VTIME __LC_LAST_UPDATE_TIMER,__LC_EXIT_TIMER,__LC_SYSTEM_TIMER
@@ -727,7 +746,17 @@ mcck_no_vtime:
 	jno	mcck_return
 	brasl	%r14,s390_handle_mcck
 mcck_return:
-        RESTORE_ALL __LC_RETURN_MCCK_PSW,0
+	mvc	__LC_RETURN_MCCK_PSW(16),SP_PSW(%r15) # move return PSW
+	ni	__LC_RETURN_MCCK_PSW+1,0xfd # clear wait state bit
+	lmg	%r0,%r15,SP_R0(%r15)	# load gprs 0-15
+#ifdef CONFIG_VIRT_CPU_ACCOUNTING
+	mvc	__LC_ASYNC_ENTER_TIMER(8),__LC_SAVE_AREA+104
+	tm	__LC_RETURN_MCCK_PSW+1,0x01 # returning to user ?
+	jno	0f
+	stpt	__LC_EXIT_TIMER
+0:
+#endif
+	lpswe	__LC_RETURN_MCCK_PSW	# back to caller
 
 #ifdef CONFIG_SMP
 /*
@@ -789,6 +818,8 @@ cleanup_table_sysc_leave:
 	.quad	sysc_leave, sysc_work_loop
 cleanup_table_sysc_work_loop:
 	.quad	sysc_work_loop, sysc_reschedule
+cleanup_table_io_return:
+	.quad	io_return, io_leave
 cleanup_table_io_leave:
 	.quad	io_leave, io_done
 cleanup_table_io_work_loop:
@@ -814,6 +845,11 @@ cleanup_critical:
 	jl	0f
 	clc	8(8,%r12),BASED(cleanup_table_sysc_work_loop+8)
 	jl	cleanup_sysc_return
+0:
+	clc	8(8,%r12),BASED(cleanup_table_io_return)
+	jl	0f
+	clc	8(8,%r12),BASED(cleanup_table_io_return+8)
+	jl	cleanup_io_return
 0:
 	clc	8(8,%r12),BASED(cleanup_table_io_leave)
 	jl	0f
@@ -847,7 +883,7 @@ cleanup_system_call:
 	mvc	__LC_SAVE_AREA(32),0(%r12)
 0:	stg	%r13,8(%r12)
 	stg	%r12,__LC_SAVE_AREA+96	# argh
-	SAVE_ALL __LC_SVC_OLD_PSW,__LC_SAVE_AREA,1
+	SAVE_ALL_SYNC __LC_SVC_OLD_PSW,__LC_SAVE_AREA
 	CREATE_STACK_FRAME __LC_SVC_OLD_PSW,__LC_SAVE_AREA
 	lg	%r12,__LC_SAVE_AREA+96	# argh
 	stg	%r15,24(%r12)
@@ -957,7 +993,6 @@ cleanup_io_leave_insn:
                .quad  __critical_end
 
 #define SYSCALL(esa,esame,emu)	.long esame
-	.globl  sys_call_table
 sys_call_table:
 #include "syscalls.S"
 #undef SYSCALL
@@ -965,7 +1000,6 @@ sys_call_table:
 #ifdef CONFIG_COMPAT
 
 #define SYSCALL(esa,esame,emu)	.long emu
-	.globl  sys_call_table_emu
 sys_call_table_emu:
 #include "syscalls.S"
 #undef SYSCALL

arch/s390/kernel/head.S

 /*
  *  arch/s390/kernel/head.S
  *
- * (C) Copyright IBM Corp. 1999, 2005
+ * Copyright (C) IBM Corp. 1999,2006
  *
  *    Author(s): Hartmut Penner <hp@de.ibm.com>
  *		 Martin Schwidefsky <schwidefsky@de.ibm.com>
@@ -482,24 +482,23 @@ start:
 
 .macro GET_IPL_DEVICE
 .Lget_ipl_device:
-	basr  %r12,0
-.LGID:	l     %r1,0xb8			# get sid
+	l     %r1,0xb8			# get sid
 	sll   %r1,15			# test if subchannel is enabled
 	srl   %r1,31
 	ltr   %r1,%r1
-	bz    0(%r14)			# subchannel disabled
+	bz    2f-.LPG1(%r13)		# subchannel disabled
 	l     %r1,0xb8
-	la    %r5,.Lipl_schib-.LGID(%r12)
+	la    %r5,.Lipl_schib-.LPG1(%r13)
 	stsch 0(%r5)		        # get schib of subchannel
-	bnz   0(%r14)			# schib not available
+	bnz   2f-.LPG1(%r13)		# schib not available
 	tm    5(%r5),0x01		# devno valid?
-	bno   0(%r14)
-	la    %r6,ipl_parameter_flags-.LGID(%r12)
+	bno   2f-.LPG1(%r13)
+	la    %r6,ipl_parameter_flags-.LPG1(%r13)
 	oi    3(%r6),0x01		# set flag
-	la    %r2,ipl_devno-.LGID(%r12)
+	la    %r2,ipl_devno-.LPG1(%r13)
 	mvc   0(2,%r2),6(%r5)		# store devno
 	tm    4(%r5),0x80		# qdio capable device?
-	bno   0(%r14)
+	bno   2f-.LPG1(%r13)
 	oi    3(%r6),0x02		# set flag
 
 	# copy ipl parameters
@@ -523,7 +522,7 @@ start:
 	ar    %r2,%r1
 	sr    %r0,%r4
 	jne   1b
-	b     0(%r14)
+	b     2f-.LPG1(%r13)
 
 	.align 4
 .Lipl_schib:
@@ -537,6 +536,7 @@ ipl_parameter_flags:
 	.globl ipl_devno
 ipl_devno:
 	.word 0
+2:
 .endm
 
 #ifdef CONFIG_64BIT

arch/s390/kernel/head31.S

 /*
  * arch/s390/kernel/head31.S
  *
- * (C) Copyright IBM Corp. 2005
+ * Copyright (C) IBM Corp. 2005,2006
  *
  *   Author(s):	Hartmut Penner <hp@de.ibm.com>
  *		Martin Schwidefsky <schwidefsky@de.ibm.com>
@@ -17,10 +17,29 @@
 #
 	.org	0x10000
 startup:basr	%r13,0			# get base
-.LPG1:	l	%r1, .Lget_ipl_device_addr-.LPG1(%r13)
-	basr	%r14, %r1
+.LPG0:	l	%r13,0f-.LPG0(%r13)
+	b	0(%r13)
+0:	.long	startup_continue
+
+#
+# params at 10400 (setup.h)
+#
+	.org	PARMAREA
+	.long	0,0			# IPL_DEVICE
+	.long	0,RAMDISK_ORIGIN	# INITRD_START
+	.long	0,RAMDISK_SIZE		# INITRD_SIZE
+
+	.org	COMMAND_LINE
+	.byte	"root=/dev/ram0 ro"
+	.byte	0
+
+	.org	0x11000
+
+startup_continue:
+	basr	%r13,0			# get base
+.LPG1:	GET_IPL_DEVICE
 	lctl	%c0,%c15,.Lctl-.LPG1(%r13) # load control registers
-	la	%r12,_pstart-.LPG1(%r13) # pointer to parameter area
+	l	%r12,.Lparmaddr-.LPG1(%r13) # pointer to parameter area
 					# move IPL device to lowcore
 	mvc	__LC_IPLDEV(4),IPL_DEVICE-PARMAREA(%r12)
 
@@ -51,8 +70,8 @@ startup:basr	%r13,0			 # get base
 	a	%r1,__LC_EXT_NEW_PSW+4	# set handler
 	st	%r1,__LC_EXT_NEW_PSW+4
 
-	la	%r4,_pstart-.LPG1(%r13)	# %r4 is our index for sccb stuff
-	la	%r1, .Lsccb-PARMAREA(%r4)	# our sccb
+	l	%r4,.Lsccbaddr-.LPG1(%r13) # %r4 is our index for sccb stuff
+	lr	%r1,%r4			# our sccb
 	.insn	rre,0xb2200000,%r2,%r1	# service call
 	ipm	%r1
 	srl	%r1,28			# get cc code
@@ -63,7 +82,7 @@ startup:basr	%r13,0			 # get base
 	be	.Lservicecall-.LPG1(%r13)
 	lpsw	.Lwaitsclp-.LPG1(%r13)
 .Lsclph:
-	lh	%r1,.Lsccbr-PARMAREA(%r4)
+	lh	%r1,.Lsccbr-.Lsccb(%r4)
 	chi	%r1,0x10		# 0x0010 is the sucess code
 	je	.Lprocsccb		# let's process the sccb
 	chi	%r1,0x1f0
@@ -74,7 +93,7 @@ startup:basr	%r13,0			 # get base
 	b	.Lservicecall-.LPG1(%r13)
 .Lprocsccb:
 	lhi	%r1,0
-	icm	%r1,3,.Lscpincr1-PARMAREA(%r4) # use this one if != 0
+	icm	%r1,3,.Lscpincr1-.Lsccb(%r4) # use this one if != 0
 	jnz	.Lscnd
 	lhi	%r1,0x800		# otherwise report 2GB
 .Lscnd:
@@ -84,10 +103,10 @@ startup:basr	%r13,0			 # get base
 	lr	%r1,%r3
 .Lno2gb:
 	xr	%r3,%r3			# same logic
-	ic	%r3,.Lscpa1-PARMAREA(%r4)
+	ic	%r3,.Lscpa1-.Lsccb(%r4)
 	chi	%r3,0x00
 	jne	.Lcompmem
-	l	%r3,.Lscpa2-PARMAREA(%r13)
+	l	%r3,.Lscpa2-.Lsccb(%r4)
 .Lcompmem:
 	mr	%r2,%r1			# mem in MB on 128-bit
 	l	%r1,.Lonemb-.LPG1(%r13)
@@ -95,8 +114,6 @@ startup:basr	%r13,0			 # get base
 	b	.Lfchunk-.LPG1(%r13)
 
 	.align 4
-.Lget_ipl_device_addr:
-	.long	.Lget_ipl_device
 .Lpmask:
 	.byte	0
 .align 8
@@ -242,6 +259,8 @@ startup:basr	%r13,0			 # get base
 	.long	0			# cr13: home space segment table
 	.long	0xc0000000		# cr14: machine check handling off
 	.long	0			# cr15: linkage stack operations
+.Lduct:	.long	0,0,0,0,0,0,0,0
+	.long	0,0,0,0,0,0,0,0
 .Lpcmem:.long	0x00080000,0x80000000 + .Lchkmem
 .Lpcfpu:.long	0x00080000,0x80000000 + .Lchkfpu
 .Lpccsp:.long	0x00080000,0x80000000 + .Lchkcsp
@@ -252,25 +271,9 @@ startup:basr	%r13,0			 # get base
 .Lmflags:.long	machine_flags
 .Lbss_bgn:  .long __bss_start
 .Lbss_end:  .long _end
-
-	.org	PARMAREA-64
-.Lduct:	.long	0,0,0,0,0,0,0,0
-	.long	0,0,0,0,0,0,0,0
-
-#
-# params at 10400 (setup.h)
-#
-	.org	PARMAREA
-	.global _pstart
-_pstart:
-	.long	0,0			# IPL_DEVICE
-	.long	0,RAMDISK_ORIGIN	# INITRD_START
-	.long	0,RAMDISK_SIZE		# INITRD_SIZE
-
-	.org	COMMAND_LINE
-	.byte	"root=/dev/ram0 ro"
-	.byte	0
-	.org	0x11000
+.Lparmaddr: .long PARMAREA
+.Lsccbaddr: .long .Lsccb
+	.align	4096
 .Lsccb:
 	.hword	0x1000			# length, one page
 	.byte	0x00,0x00,0x00
@@ -287,18 +290,14 @@ _pstart:
 .Lscpincr2:
 	.quad	0x00
 	.fill	3984,1,0
-	.org	0x12000
-	.global	_pend
-_pend:
-
-	GET_IPL_DEVICE
+	.align	4096
 
 #ifdef CONFIG_SHARED_KERNEL
 	.org	0x100000
 #endif
 
 #
-# startup-code, running in virtual mode
+# startup-code, running in absolute addressing mode
 #
 	.globl	_stext
 _stext:	basr	%r13,0			# get base

arch/s390/kernel/head64.S

 /*
  * arch/s390/kernel/head64.S
  *
- * (C) Copyright IBM Corp. 1999,2005
+ * Copyright (C) IBM Corp. 1999,2006
  *
  *   Author(s):	Hartmut Penner <hp@de.ibm.com>
  *		Martin Schwidefsky <schwidefsky@de.ibm.com>
@@ -17,16 +17,35 @@
 #
 	.org  0x10000
 startup:basr  %r13,0			 # get base
+.LPG0:	l     %r13,0f-.LPG0(%r13)
+	b     0(%r13)
+0:	.long startup_continue
+
+#
+# params at 10400 (setup.h)
+#
+	.org   PARMAREA
+	.quad  0			# IPL_DEVICE
+	.quad  RAMDISK_ORIGIN		# INITRD_START
+	.quad  RAMDISK_SIZE		# INITRD_SIZE
+
+	.org   COMMAND_LINE
+	.byte  "root=/dev/ram0 ro"
+	.byte  0
+
+	.org   0x11000
+
+startup_continue:
+	basr  %r13,0			 # get base
 .LPG1:  sll   %r13,1                     # remove high order bit
         srl   %r13,1
-	l     %r1,.Lget_ipl_device_addr-.LPG1(%r13)
-	basr  %r14,%r1
+	GET_IPL_DEVICE
         lhi   %r1,1                      # mode 1 = esame
         slr   %r0,%r0                    # set cpuid to zero
         sigp  %r1,%r0,0x12               # switch to esame mode
 	sam64				 # switch to 64 bit mode
 	lctlg %c0,%c15,.Lctl-.LPG1(%r13) # load control registers
-	larl  %r12,_pstart               # pointer to parameter area
+	lg    %r12,.Lparmaddr-.LPG1(%r13)# pointer to parameter area
 					 # move IPL device to lowcore
         mvc   __LC_IPLDEV(4),IPL_DEVICE+4-PARMAREA(%r12)
 
@@ -55,8 +74,8 @@ startup:basr  %r13,0                     # get base
 	larl  %r1,.Lsclph
 	stg   %r1,__LC_EXT_NEW_PSW+8	# set handler
 
-	larl  %r4,_pstart		# %r4 is our index for sccb stuff
-	la    %r1,.Lsccb-PARMAREA(%r4)	# our sccb
+	larl  %r4,.Lsccb		# %r4 is our index for sccb stuff
+	lgr   %r1,%r4			# our sccb
 	.insn rre,0xb2200000,%r2,%r1	# service call
 	ipm   %r1
 	srl   %r1,28			# get cc code
@@ -67,7 +86,7 @@ startup:basr  %r13,0                     # get base
 	be    .Lservicecall-.LPG1(%r13)
 	lpswe .Lwaitsclp-.LPG1(%r13)
 .Lsclph:
-	lh    %r1,.Lsccbr-PARMAREA(%r4)
+	lh    %r1,.Lsccbr-.Lsccb(%r4)
 	chi   %r1,0x10			# 0x0010 is the sucess code
 	je    .Lprocsccb		# let's process the sccb
 	chi   %r1,0x1f0
@@ -78,15 +97,15 @@ startup:basr  %r13,0                     # get base
 	b     .Lservicecall-.LPG1(%r13)
 .Lprocsccb:
 	lghi  %r1,0
-	icm   %r1,3,.Lscpincr1-PARMAREA(%r4) # use this one if != 0
+	icm   %r1,3,.Lscpincr1-.Lsccb(%r4) # use this one if != 0
 	jnz   .Lscnd
-	lg    %r1,.Lscpincr2-PARMAREA(%r4) # otherwise use this one
+	lg    %r1,.Lscpincr2-.Lsccb(%r4) # otherwise use this one
 .Lscnd:
 	xr    %r3,%r3			# same logic
-	ic    %r3,.Lscpa1-PARMAREA(%r4)
+	ic    %r3,.Lscpa1-.Lsccb(%r4)
 	chi   %r3,0x00
 	jne   .Lcompmem
-	l     %r3,.Lscpa2-PARMAREA(%r13)
+	l     %r3,.Lscpa2-.Lsccb(%r4)
 .Lcompmem:
 	mlgr  %r2,%r1			# mem in MB on 128-bit
 	l     %r1,.Lonemb-.LPG1(%r13)
@@ -94,8 +113,6 @@ startup:basr  %r13,0                     # get base
 	b     .Lfchunk-.LPG1(%r13)
 
 	.align 4
-.Lget_ipl_device_addr:
-	.long .Lget_ipl_device
 .Lpmask:
 	.byte 0
 	.align 8
@@ -242,29 +259,16 @@ startup:basr  %r13,0                     # get base
         .quad  0                        # cr13: home space segment table
         .quad  0xc0000000               # cr14: machine check handling off
         .quad  0                        # cr15: linkage stack operations
+.Lduct: .long 0,0,0,0,0,0,0,0
+	.long 0,0,0,0,0,0,0,0
 .Lpcmsk:.quad  0x0000000180000000
 .L4malign:.quad 0xffffffffffc00000
 .Lscan2g:.quad 0x80000000 + 0x20000 - 8 # 2GB + 128K - 8
 .Lnop:	.long  0x07000700
+.Lparmaddr:
+	.quad	PARMAREA
 
-	.org PARMAREA-64
-.Lduct:	.long 0,0,0,0,0,0,0,0
-	.long 0,0,0,0,0,0,0,0
-
-#
-# params at 10400 (setup.h)
-#
-	.org   PARMAREA
-	.global _pstart
-_pstart:
-	.quad  0                        # IPL_DEVICE
-        .quad  RAMDISK_ORIGIN           # INITRD_START
-        .quad  RAMDISK_SIZE             # INITRD_SIZE
-
-        .org   COMMAND_LINE
-    	.byte  "root=/dev/ram0 ro"
-        .byte  0
-	.org   0x11000
+	.align 4096
 .Lsccb:
 	.hword 0x1000			# length, one page
 	.byte 0x00,0x00,0x00
@@ -281,18 +285,14 @@ _pstart:
 .Lscpincr2:
 	.quad 0x00
 	.fill 3984,1,0
-	.org 0x12000
-	.global _pend
-_pend:	
-
-	GET_IPL_DEVICE
+	.align 4096
 
 #ifdef CONFIG_SHARED_KERNEL
 	.org   0x100000
 #endif
 	
 #
-# startup-code, running in virtual mode
+# startup-code, running in absolute addressing mode
 #
         .globl _stext
 _stext:	basr  %r13,0                    # get base
@@ -326,4 +326,3 @@ _stext:	basr  %r13,0                    # get base
             .align 8
 .Ldw:       .quad  0x0002000180000000,0x0000000000000000
 .Laregs:    .long  0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
-

arch/s390/kernel/s390_ksyms.c

@@ -46,8 +46,6 @@ EXPORT_SYMBOL(__down_interruptible);
  */
 extern int dump_fpu (struct pt_regs * regs, s390_fp_regs *fpregs);
 EXPORT_SYMBOL(dump_fpu);
-EXPORT_SYMBOL(overflowuid);
-EXPORT_SYMBOL(overflowgid);
 EXPORT_SYMBOL(empty_zero_page);
 
 /*

arch/s390/kernel/setup.c

@@ -37,6 +37,7 @@
 #include <linux/seq_file.h>
 #include <linux/kernel_stat.h>
 #include <linux/device.h>
+#include <linux/notifier.h>
 
 #include <asm/uaccess.h>
 #include <asm/system.h>
@@ -115,6 +116,7 @@ void __devinit cpu_init (void)
  */
 char vmhalt_cmd[128] = "";
 char vmpoff_cmd[128] = "";
+char vmpanic_cmd[128] = "";
 
 static inline void strncpy_skip_quote(char *dst, char *src, int n)
 {
@@ -146,6 +148,38 @@ static int __init vmpoff_setup(char *str)
 
 __setup("vmpoff=", vmpoff_setup);
 
+static int vmpanic_notify(struct notifier_block *self, unsigned long event,
+			  void *data)
+{
+	if (MACHINE_IS_VM && strlen(vmpanic_cmd) > 0)
+		cpcmd(vmpanic_cmd, NULL, 0, NULL);
+
+	return NOTIFY_OK;
+}
+
+#define PANIC_PRI_VMPANIC	0
+
+static struct notifier_block vmpanic_nb = {
+	.notifier_call = vmpanic_notify,
+	.priority = PANIC_PRI_VMPANIC
+};
+
+static int __init vmpanic_setup(char *str)
+{
+	static int register_done __initdata = 0;
+
+	strncpy_skip_quote(vmpanic_cmd, str, 127);
+	vmpanic_cmd[127] = 0;
+	if (!register_done) {
+		register_done = 1;
+		atomic_notifier_chain_register(&panic_notifier_list,
+					       &vmpanic_nb);
+	}
+	return 1;
+}
+
+__setup("vmpanic=", vmpanic_setup);
+
 /*
  * condev= and conmode= setup parameter.
  */
@@ -289,18 +323,33 @@ void (*_machine_power_off)(void) = do_machine_power_off_nonsmp;
 
 void machine_restart(char *command)
 {
+	if (!in_interrupt() || oops_in_progress)
+		/*
+		 * Only unblank the console if we are called in enabled
+		 * context or a bust_spinlocks cleared the way for us.
+		 */
 		console_unblank();
 	_machine_restart(command);
 }
 
 void machine_halt(void)
 {
+	if (!in_interrupt() || oops_in_progress)
+		/*
+		 * Only unblank the console if we are called in enabled
+		 * context or a bust_spinlocks cleared the way for us.
+		 */
 		console_unblank();
 	_machine_halt();
 }
 
 void machine_power_off(void)
 {
+	if (!in_interrupt() || oops_in_progress)
+		/*
+		 * Only unblank the console if we are called in enabled
+		 * context or a bust_spinlocks cleared the way for us.
+		 */
 		console_unblank();
 	_machine_power_off();
 }

arch/s390/kernel/traps.c

@@ -150,13 +150,11 @@ void show_stack(struct task_struct *task, unsigned long *sp)
 	unsigned long *stack;
 	int i;
 
-	// debugging aid: "show_stack(NULL);" prints the
-	// back trace for this cpu.
-
 	if (!sp)
-		sp = task ? (unsigned long *) task->thread.ksp : __r15;
-
+		stack = task ? (unsigned long *) task->thread.ksp : __r15;
+	else
 		stack = sp;
+
 	for (i = 0; i < kstack_depth_to_print; i++) {
 		if (((addr_t) stack & (THREAD_SIZE-1)) == 0)
 			break;

drivers/s390/block/dasd.c

@@ -1855,15 +1855,34 @@ dasd_generic_probe (struct ccw_device *cdev,
 {
 	int ret;
 
+	ret = ccw_device_set_options(cdev, CCWDEV_DO_PATHGROUP);
+	if (ret) {
+		printk(KERN_WARNING
+		       "dasd_generic_probe: could not set ccw-device options "
+		       "for %s\n", cdev->dev.bus_id);
+		return ret;
+	}
 	ret = dasd_add_sysfs_files(cdev);
 	if (ret) {
 		printk(KERN_WARNING
 		       "dasd_generic_probe: could not add sysfs entries "
 		       "for %s\n", cdev->dev.bus_id);
-	} else {
-		cdev->handler = &dasd_int_handler;
+		return ret;
 	}
+	cdev->handler = &dasd_int_handler;
 
+	/*
+	 * Automatically online either all dasd devices (dasd_autodetect)
+	 * or all devices specified with dasd= parameters during
+	 * initial probe.
+	 */
+	if ((dasd_get_feature(cdev, DASD_FEATURE_INITIAL_ONLINE) > 0 ) ||
+	    (dasd_autodetect && dasd_busid_known(cdev->dev.bus_id) != 0))
+		ret = ccw_device_set_online(cdev);
+	if (ret)
+		printk(KERN_WARNING
+		       "dasd_generic_probe: could not initially online "
+		       "ccw-device %s\n", cdev->dev.bus_id);
 	return ret;
 }
 
@@ -1911,6 +1930,8 @@ dasd_generic_set_online (struct ccw_device *cdev,
 	struct dasd_device *device;
 	int rc;
 
+	/* first online clears initial online feature flag */
+	dasd_set_feature(cdev, DASD_FEATURE_INITIAL_ONLINE, 0);
 	device = dasd_create_device(cdev);
 	if (IS_ERR(device))
 		return PTR_ERR(device);
@@ -2065,31 +2086,6 @@ dasd_generic_notify(struct ccw_device *cdev, int event)
 	return ret;
 }
 
-/*
- * Automatically online either all dasd devices (dasd_autodetect) or
- * all devices specified with dasd= parameters.
- */
-static int
-__dasd_auto_online(struct device *dev, void *data)
-{
-	struct ccw_device *cdev;
-
-	cdev = to_ccwdev(dev);
-	if (dasd_autodetect || dasd_busid_known(cdev->dev.bus_id) == 0)
-		ccw_device_set_online(cdev);
-	return 0;
-}
-
-void
-dasd_generic_auto_online (struct ccw_driver *dasd_discipline_driver)
-{
-	struct device_driver *drv;
-
-	drv = get_driver(&dasd_discipline_driver->driver);
-	driver_for_each_device(drv, NULL, NULL, __dasd_auto_online);
-	put_driver(drv);
-}
-
 
 static int __init
 dasd_init(void)
@@ -2170,23 +2166,4 @@ EXPORT_SYMBOL_GPL(dasd_generic_remove);
 EXPORT_SYMBOL_GPL(dasd_generic_notify);
 EXPORT_SYMBOL_GPL(dasd_generic_set_online);
 EXPORT_SYMBOL_GPL(dasd_generic_set_offline);
-EXPORT_SYMBOL_GPL(dasd_generic_auto_online);
 
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only.  This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-indent-level: 4
- * c-brace-imaginary-offset: 0
- * c-brace-offset: -4
- * c-argdecl-indent: 4
- * c-label-offset: -4
- * c-continued-statement-offset: 4
- * c-continued-brace-offset: 0
- * indent-tabs-mode: 1
- * tab-width: 8
- * End:
- */

drivers/s390/block/dasd_3370_erp.c

@@ -82,22 +82,3 @@ dasd_3370_erp_examine(struct dasd_ccw_req * cqr, struct irb * irb)
 	return dasd_era_recover;
 
 }				/* END dasd_3370_erp_examine */
-
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only.  This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-indent-level: 4 
- * c-brace-imaginary-offset: 0
- * c-brace-offset: -4
- * c-argdecl-indent: 4
- * c-label-offset: -4
- * c-continued-statement-offset: 4
- * c-continued-brace-offset: 0
- * indent-tabs-mode: 1
- * tab-width: 8
- * End:
- */

drivers/s390/block/dasd_3990_erp.c

@@ -2723,22 +2723,3 @@ dasd_3990_erp_action(struct dasd_ccw_req * cqr)
 	return erp;
 
 }				/* end dasd_3990_erp_action */
-
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only.  This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-indent-level: 4 
- * c-brace-imaginary-offset: 0
- * c-brace-offset: -4
- * c-argdecl-indent: 4
- * c-label-offset: -4
- * c-continued-statement-offset: 4
- * c-continued-brace-offset: 0
- * indent-tabs-mode: 1
- * tab-width: 8
- * End:
- */

drivers/s390/block/dasd_9336_erp.c

@@ -39,22 +39,3 @@ dasd_9336_erp_examine(struct dasd_ccw_req * cqr, struct irb * irb)
 	return dasd_era_recover;
 
 }				/* END dasd_9336_erp_examine */
-
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only.  This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-indent-level: 4 
- * c-brace-imaginary-offset: 0
- * c-brace-offset: -4
- * c-argdecl-indent: 4
- * c-label-offset: -4
- * c-continued-statement-offset: 4
- * c-continued-brace-offset: 0
- * indent-tabs-mode: 1
- * tab-width: 8
- * End:
- */

drivers/s390/block/dasd_devmap.c

@@ -27,7 +27,7 @@
 #include "dasd_int.h"
 
 kmem_cache_t *dasd_page_cache;
-EXPORT_SYMBOL(dasd_page_cache);
+EXPORT_SYMBOL_GPL(dasd_page_cache);
 
 /*
  * dasd_devmap_t is used to store the features and the relation
@@ -48,6 +48,20 @@ struct dasd_devmap {
 	struct dasd_uid uid;
 };
 
+/*
+ * dasd_servermap is used to store the server_id of all storage servers
+ * accessed by DASD device driver.
+ */
+struct dasd_servermap {
+	struct list_head list;
+	struct server_id {
+		char vendor[4];
+		char serial[15];
+	} sid;
+};
+
+static struct list_head dasd_serverlist;
+
 /*
  * Parameter parsing functions for dasd= parameter. The syntax is:
  *   <devno>		: (0x)?[0-9a-fA-F]+
@@ -64,6 +78,8 @@ struct dasd_devmap {
 
 int dasd_probeonly =  0;	/* is true, when probeonly mode is active */
 int dasd_autodetect = 0;	/* is true, when autodetection is active */
+int dasd_nopav = 0;		/* is true, when PAV is disabled */
+EXPORT_SYMBOL_GPL(dasd_nopav);
 
 /*
  * char *dasd[] is intended to hold the ranges supplied by the dasd= statement
@@ -228,19 +244,24 @@ dasd_parse_keyword( char *parsestring ) {
 		length = strlen(parsestring);
 		residual_str = parsestring + length;
         }
-	if (strncmp ("autodetect", parsestring, length) == 0) {
+	if (strncmp("autodetect", parsestring, length) == 0) {
 		dasd_autodetect = 1;
 		MESSAGE (KERN_INFO, "%s",
 			 "turning to autodetection mode");
                 return residual_str;
         }
-        if (strncmp ("probeonly", parsestring, length) == 0) {
+	if (strncmp("probeonly", parsestring, length) == 0) {
 		dasd_probeonly = 1;
 		MESSAGE(KERN_INFO, "%s",
 			"turning to probeonly mode");
                 return residual_str;
         }
-        if (strncmp ("fixedbuffers", parsestring, length) == 0) {
+	if (strncmp("nopav", parsestring, length) == 0) {
+		dasd_nopav = 1;
+		MESSAGE(KERN_INFO, "%s", "disable PAV mode");
+		return residual_str;
+	}
+	if (strncmp("fixedbuffers", parsestring, length) == 0) {
 		if (dasd_page_cache)
 			return residual_str;
 		dasd_page_cache =
@@ -294,6 +315,8 @@ dasd_parse_range( char *parsestring ) {
 	features = dasd_feature_list(str, &str);
 	if (features < 0)
 		return ERR_PTR(-EINVAL);
+	/* each device in dasd= parameter should be set initially online */
+	features |= DASD_FEATURE_INITIAL_ONLINE;
 	while (from <= to) {
 		sprintf(bus_id, "%01x.%01x.%04x",
 			from_id0, from_id1, from++);
@@ -368,7 +391,7 @@ dasd_add_busid(char *bus_id, int features)
 	int hash;
 
 	new = (struct dasd_devmap *)
-		kmalloc(sizeof(struct dasd_devmap), GFP_KERNEL);
+		kzalloc(sizeof(struct dasd_devmap), GFP_KERNEL);
 	if (!new)
 		return ERR_PTR(-ENOMEM);
 	spin_lock(&dasd_devmap_lock);
@@ -630,7 +653,8 @@ dasd_ro_show(struct device *dev, struct device_attribute *attr, char *buf)
 }
 
 static ssize_t
-dasd_ro_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
+dasd_ro_store(struct device *dev, struct device_attribute *attr,
+	      const char *buf, size_t count)
 {
 	struct dasd_devmap *devmap;
 	int ro_flag;
@@ -673,7 +697,8 @@ dasd_use_diag_show(struct device *dev, struct device_attribute *attr, char *buf)
 }
 
 static ssize_t
-dasd_use_diag_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
+dasd_use_diag_store(struct device *dev, struct device_attribute *attr,
+		    const char *buf, size_t count)
 {
 	struct dasd_devmap *devmap;
 	ssize_t rc;
@@ -697,11 +722,11 @@ dasd_use_diag_store(struct device *dev, struct device_attribute *attr, const cha
 	return rc;
 }
 
-static
-DEVICE_ATTR(use_diag, 0644, dasd_use_diag_show, dasd_use_diag_store);
+static DEVICE_ATTR(use_diag, 0644, dasd_use_diag_show, dasd_use_diag_store);
 
 static ssize_t
-dasd_discipline_show(struct device *dev, struct device_attribute *attr, char *buf)
+dasd_discipline_show(struct device *dev, struct device_attribute *attr,
+		     char *buf)
 {
 	struct dasd_devmap *devmap;
 	char *dname;
@@ -834,6 +859,38 @@ static struct attribute_group dasd_attr_group = {
 	.attrs = dasd_attrs,
 };
 
+/*
+ * Check if the related storage server is already contained in the
+ * dasd_serverlist. If server is not contained, create new entry.
+ * Return 0 if server was already in serverlist,
+ *	  1 if the server was added successfully
+ *	 <0 in case of error.
+ */
+static int
+dasd_add_server(struct dasd_uid *uid)
+{
+	struct dasd_servermap *new, *tmp;
+
+	/* check if server is already contained */
+	list_for_each_entry(tmp, &dasd_serverlist, list)
+	  // normale cmp?
+		if (strncmp(tmp->sid.vendor, uid->vendor,
+			    sizeof(tmp->sid.vendor)) == 0
+		    && strncmp(tmp->sid.serial, uid->serial,
+			       sizeof(tmp->sid.serial)) == 0)
+			return 0;
+
+	new = (struct dasd_servermap *)
+		kzalloc(sizeof(struct dasd_servermap), GFP_KERNEL);
+	if (!new)
+		return -ENOMEM;
+
+	strncpy(new->sid.vendor, uid->vendor, sizeof(new->sid.vendor));
+	strncpy(new->sid.serial, uid->serial, sizeof(new->sid.serial));
+	list_add(&new->list, &dasd_serverlist);
+	return 1;
+}
+
 
 /*
  * Return copy of the device unique identifier.
@@ -854,21 +911,26 @@ dasd_get_uid(struct ccw_device *cdev, struct dasd_uid *uid)
 
 /*
  * Register the given device unique identifier into devmap struct.
+ * Return 0 if server was already in serverlist,
+ *	  1 if the server was added successful
+ *	 <0 in case of error.
  */
 int
 dasd_set_uid(struct ccw_device *cdev, struct dasd_uid *uid)
 {
 	struct dasd_devmap *devmap;
+	int rc;
 
 	devmap = dasd_find_busid(cdev->dev.bus_id);
 	if (IS_ERR(devmap))
 		return PTR_ERR(devmap);
 	spin_lock(&dasd_devmap_lock);
 	devmap->uid = *uid;
+	rc = dasd_add_server(uid);
 	spin_unlock(&dasd_devmap_lock);
-	return 0;
+	return rc;
 }
-EXPORT_SYMBOL(dasd_set_uid);
+EXPORT_SYMBOL_GPL(dasd_set_uid);
 
 /*
  * Return value of the specified feature.
@@ -880,7 +942,7 @@ dasd_get_feature(struct ccw_device *cdev, int feature)
 
 	devmap = dasd_find_busid(cdev->dev.bus_id);
 	if (IS_ERR(devmap))
-		return (int) PTR_ERR(devmap);
+		return PTR_ERR(devmap);
 
 	return ((devmap->features & feature) != 0);
 }
@@ -896,7 +958,7 @@ dasd_set_feature(struct ccw_device *cdev, int feature, int flag)
 
 	devmap = dasd_find_busid(cdev->dev.bus_id);
 	if (IS_ERR(devmap))
-		return (int) PTR_ERR(devmap);
+		return PTR_ERR(devmap);
 
 	spin_lock(&dasd_devmap_lock);
 	if (flag)
@@ -932,8 +994,10 @@ dasd_devmap_init(void)
 	dasd_max_devindex = 0;
 	for (i = 0; i < 256; i++)
 		INIT_LIST_HEAD(&dasd_hashlists[i]);
-	return 0;
 
+	/* Initialize servermap structure. */
+	INIT_LIST_HEAD(&dasd_serverlist);
+	return 0;
 }
 
 void

drivers/s390/block/dasd_diag.c

@@ -336,7 +336,7 @@ dasd_diag_check_device(struct dasd_device *device)
 
 	private = (struct dasd_diag_private *) device->private;
 	if (private == NULL) {
-		private = kmalloc(sizeof(struct dasd_diag_private),GFP_KERNEL);
+		private = kzalloc(sizeof(struct dasd_diag_private),GFP_KERNEL);
 		if (private == NULL) {
 			DEV_MESSAGE(KERN_WARNING, device, "%s",
 				"memory allocation failed for private data");

drivers/s390/block/dasd_eckd.h

@@ -41,9 +41,10 @@
 #define DASD_ECKD_CCW_RESERVE		 0xB4
 
 /*
- *Perform Subsystem Function / Sub-Orders
+ * Perform Subsystem Function / Sub-Orders
  */
 #define PSF_ORDER_PRSSD 0x18
+#define PSF_ORDER_SSC	0x1D
 
 /*****************************************************************************
  * SECTION: Type Definitions
@@ -353,4 +354,15 @@ struct dasd_psf_prssd_data {
 	unsigned char varies[9];
 } __attribute__ ((packed));
 
+/*
+ * Perform Subsystem Function - Set Subsystem Characteristics
+ */
+struct dasd_psf_ssc_data {
+	unsigned char order;
+	unsigned char flags;
+	unsigned char cu_type[4];
+	unsigned char suborder;
+	unsigned char reserved[59];
+} __attribute__((packed));
+
 #endif				/* DASD_ECKD_H */

drivers/s390/block/dasd_eer.c

@@ -276,7 +276,7 @@ struct dasd_eer_header {
 	__u64 tv_sec;
 	__u64 tv_usec;
 	char busid[DASD_EER_BUSID_SIZE];
-};
+} __attribute__ ((packed));
 
 /*
  * The following function can be used for those triggers that have
@@ -521,6 +521,8 @@ static int dasd_eer_open(struct inode *inp, struct file *filp)
 	unsigned long flags;
 
 	eerb = kzalloc(sizeof(struct eerbuffer), GFP_KERNEL);
+	if (!eerb)
+		return -ENOMEM;
 	eerb->buffer_page_count = eer_pages;
 	if (eerb->buffer_page_count < 1 ||
 	    eerb->buffer_page_count > INT_MAX / PAGE_SIZE) {

drivers/s390/block/dasd_fba.c

@@ -56,19 +56,13 @@ static struct ccw_driver dasd_fba_driver; /* see below */
 static int
 dasd_fba_probe(struct ccw_device *cdev)
 {
-	int ret;
-
-	ret = dasd_generic_probe (cdev, &dasd_fba_discipline);
-	if (ret)
-		return ret;
-	ccw_device_set_options(cdev, CCWDEV_DO_PATHGROUP);
-	return 0;
+	return dasd_generic_probe(cdev, &dasd_fba_discipline);
 }
 
 static int
 dasd_fba_set_online(struct ccw_device *cdev)
 {
-	return dasd_generic_set_online (cdev, &dasd_fba_discipline);
+	return dasd_generic_set_online(cdev, &dasd_fba_discipline);
 }
 
 static struct ccw_driver dasd_fba_driver = {
@@ -131,7 +125,7 @@ dasd_fba_check_characteristics(struct dasd_device *device)
 
 	private = (struct dasd_fba_private *) device->private;
 	if (private == NULL) {
-		private = kmalloc(sizeof(struct dasd_fba_private), GFP_KERNEL);
+		private = kzalloc(sizeof(struct dasd_fba_private), GFP_KERNEL);
 		if (private == NULL) {
 			DEV_MESSAGE(KERN_WARNING, device, "%s",
 				    "memory allocation failed for private "
@@ -569,16 +563,8 @@ static struct dasd_discipline dasd_fba_discipline = {
 static int __init
 dasd_fba_init(void)
 {
-	int ret;
-
 	ASCEBC(dasd_fba_discipline.ebcname, 4);
-
-	ret = ccw_driver_register(&dasd_fba_driver);
-	if (ret)
-		return ret;
-
-	dasd_generic_auto_online(&dasd_fba_driver);
-	return 0;
+	return ccw_driver_register(&dasd_fba_driver);
 }
 
 static void __exit
@@ -589,22 +575,3 @@ dasd_fba_cleanup(void)
 
 module_init(dasd_fba_init);
 module_exit(dasd_fba_cleanup);
-
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only.  This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-indent-level: 4 
- * c-brace-imaginary-offset: 0
- * c-brace-offset: -4
- * c-argdecl-indent: 4
- * c-label-offset: -4
- * c-continued-statement-offset: 4
- * c-continued-brace-offset: 0
- * indent-tabs-mode: 1
- * tab-width: 8
- * End:
- */

drivers/s390/block/dasd_int.h

@@ -513,12 +513,12 @@ void dasd_generic_remove (struct ccw_device *cdev);
 int dasd_generic_set_online(struct ccw_device *, struct dasd_discipline *);
 int dasd_generic_set_offline (struct ccw_device *cdev);
 int dasd_generic_notify(struct ccw_device *, int);
-void dasd_generic_auto_online (struct ccw_driver *);
 
 /* externals in dasd_devmap.c */
 extern int dasd_max_devindex;
 extern int dasd_probeonly;
 extern int dasd_autodetect;
+extern int dasd_nopav;
 
 int dasd_devmap_init(void);
 void dasd_devmap_exit(void);
@@ -606,22 +606,3 @@ static inline int dasd_eer_enabled(struct dasd_device *device)
 #endif				/* __KERNEL__ */
 
 #endif				/* DASD_H */
-
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only.  This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-indent-level: 4 
- * c-brace-imaginary-offset: 0
- * c-brace-offset: -4
- * c-argdecl-indent: 4
- * c-label-offset: -4
- * c-continued-statement-offset: 4
- * c-continued-brace-offset: 0
- * indent-tabs-mode: 1
- * tab-width: 8
- * End:
- */

drivers/s390/char/raw3270.c

@@ -50,6 +50,9 @@ struct raw3270 {
 	unsigned char *ascebc;		/* ascii -> ebcdic table */
 	struct class_device *clttydev;	/* 3270-class tty device ptr */
 	struct class_device *cltubdev;	/* 3270-class tub device ptr */
+
+	struct raw3270_request init_request;
+	unsigned char init_data[256];
 };
 
 /* raw3270->flags */
@@ -484,8 +487,6 @@ struct raw3270_ua {	/* Query Reply structure for Usable Area */
 	} __attribute__ ((packed)) aua;
 } __attribute__ ((packed));
 
-static unsigned char raw3270_init_data[256];
-static struct raw3270_request raw3270_init_request;
 static struct diag210 raw3270_init_diag210;
 static DECLARE_MUTEX(raw3270_init_sem);
 
@@ -644,17 +645,17 @@ __raw3270_size_device(struct raw3270 *rp)
 	 * required (3270 device switched to 'stand-by') and command
 	 * rejects (old devices that can't do 'read partition').
 	 */
-	memset(&raw3270_init_request, 0, sizeof(raw3270_init_request));
-	memset(raw3270_init_data, 0, sizeof(raw3270_init_data));
-	/* Store 'read partition' data stream to raw3270_init_data */
-	memcpy(raw3270_init_data, wbuf, sizeof(wbuf));
-	INIT_LIST_HEAD(&raw3270_init_request.list);
-	raw3270_init_request.ccw.cmd_code = TC_WRITESF;
-	raw3270_init_request.ccw.flags = CCW_FLAG_SLI;
-	raw3270_init_request.ccw.count = sizeof(wbuf);
-	raw3270_init_request.ccw.cda = (__u32) __pa(raw3270_init_data);
-
-	rc = raw3270_start_init(rp, &raw3270_init_view, &raw3270_init_request);
+	memset(&rp->init_request, 0, sizeof(rp->init_request));
+	memset(&rp->init_data, 0, 256);
+	/* Store 'read partition' data stream to init_data */
+	memcpy(&rp->init_data, wbuf, sizeof(wbuf));
+	INIT_LIST_HEAD(&rp->init_request.list);
+	rp->init_request.ccw.cmd_code = TC_WRITESF;
+	rp->init_request.ccw.flags = CCW_FLAG_SLI;
+	rp->init_request.ccw.count = sizeof(wbuf);
+	rp->init_request.ccw.cda = (__u32) __pa(&rp->init_data);
+
+	rc = raw3270_start_init(rp, &raw3270_init_view, &rp->init_request);
 	if (rc)
 		/* Check error cases: -ERESTARTSYS, -EIO and -EOPNOTSUPP */
 		return rc;
@@ -679,18 +680,18 @@ __raw3270_size_device(struct raw3270 *rp)
 	 * The device accepted the 'read partition' command. Now
 	 * set up a read ccw and issue it.
 	 */
-	raw3270_init_request.ccw.cmd_code = TC_READMOD;
-	raw3270_init_request.ccw.flags = CCW_FLAG_SLI;
-	raw3270_init_request.ccw.count = sizeof(raw3270_init_data);
-	raw3270_init_request.ccw.cda = (__u32) __pa(raw3270_init_data);
-	rc = raw3270_start_init(rp, &raw3270_init_view, &raw3270_init_request);
+	rp->init_request.ccw.cmd_code = TC_READMOD;
+	rp->init_request.ccw.flags = CCW_FLAG_SLI;
+	rp->init_request.ccw.count = sizeof(rp->init_data);
+	rp->init_request.ccw.cda = (__u32) __pa(rp->init_data);
+	rc = raw3270_start_init(rp, &raw3270_init_view, &rp->init_request);
 	if (rc)
 		return rc;
 	/* Got a Query Reply */
-	count = sizeof(raw3270_init_data) - raw3270_init_request.rescnt;
-	uap = (struct raw3270_ua *) (raw3270_init_data + 1);
+	count = sizeof(rp->init_data) - rp->init_request.rescnt;
+	uap = (struct raw3270_ua *) (rp->init_data + 1);
 	/* Paranoia check. */
-	if (raw3270_init_data[0] != 0x88 || uap->uab.qcode != 0x81)
+	if (rp->init_data[0] != 0x88 || uap->uab.qcode != 0x81)
 		return -EOPNOTSUPP;
 	/* Copy rows/columns of default Usable Area */
 	rp->rows = uap->uab.h;
@@ -749,18 +750,18 @@ raw3270_reset_device(struct raw3270 *rp)
 	int rc;
 
 	down(&raw3270_init_sem);
-	memset(&raw3270_init_request, 0, sizeof(raw3270_init_request));
-	memset(raw3270_init_data, 0, sizeof(raw3270_init_data));
-	/* Store reset data stream to raw3270_init_data/raw3270_init_request */
-	raw3270_init_data[0] = TW_KR;
-	INIT_LIST_HEAD(&raw3270_init_request.list);
-	raw3270_init_request.ccw.cmd_code = TC_EWRITEA;
-	raw3270_init_request.ccw.flags = CCW_FLAG_SLI;
-	raw3270_init_request.ccw.count = 1;
-	raw3270_init_request.ccw.cda = (__u32) __pa(raw3270_init_data);
+	memset(&rp->init_request, 0, sizeof(rp->init_request));
+	memset(&rp->init_data, 0, sizeof(rp->init_data));
+	/* Store reset data stream to init_data/init_request */
+	rp->init_data[0] = TW_KR;
+	INIT_LIST_HEAD(&rp->init_request.list);
+	rp->init_request.ccw.cmd_code = TC_EWRITEA;
+	rp->init_request.ccw.flags = CCW_FLAG_SLI;
+	rp->init_request.ccw.count = 1;
+	rp->init_request.ccw.cda = (__u32) __pa(rp->init_data);
 	rp->view = &raw3270_init_view;
 	raw3270_init_view.dev = rp;
-	rc = raw3270_start_init(rp, &raw3270_init_view, &raw3270_init_request);
+	rc = raw3270_start_init(rp, &raw3270_init_view, &rp->init_request);
 	raw3270_init_view.dev = 0;
 	rp->view = 0;
 	up(&raw3270_init_sem);
@@ -854,7 +855,7 @@ raw3270_setup_console(struct ccw_device *cdev)
 	char *ascebc;
 	int rc;
 
-	rp = (struct raw3270 *) alloc_bootmem(sizeof(struct raw3270));
+	rp = (struct raw3270 *) alloc_bootmem_low(sizeof(struct raw3270));
 	ascebc = (char *) alloc_bootmem(256);
 	rc = raw3270_setup_device(cdev, rp, ascebc);
 	if (rc)
@@ -895,7 +896,7 @@ raw3270_create_device(struct ccw_device *cdev)
 	char *ascebc;
 	int rc;
 
-	rp = kmalloc(sizeof(struct raw3270), GFP_KERNEL);
+	rp = kmalloc(sizeof(struct raw3270), GFP_KERNEL | GFP_DMA);
 	if (!rp)
 		return ERR_PTR(-ENOMEM);
 	ascebc = kmalloc(256, GFP_KERNEL);

drivers/s390/cio/blacklist.c

@@ -224,39 +224,6 @@ is_blacklisted (int ssid, int devno)
 }
 
 #ifdef CONFIG_PROC_FS
-static int
-__s390_redo_validation(struct subchannel_id schid, void *data)
-{
-	int ret;
-	struct subchannel *sch;
-
-	sch = get_subchannel_by_schid(schid);
-	if (sch) {
-		/* Already known. */
-		put_device(&sch->dev);
-		return 0;
-	}
-	ret = css_probe_device(schid);
-	if (ret == -ENXIO)
-		return ret; /* We're through. */
-	if (ret == -ENOMEM)
-		/* Stop validation for now. Bad, but no need for a panic. */
-		return ret;
-	return 0;
-}
-
-/*
- * Function: s390_redo_validation
- * Look for no longer blacklisted devices
- * FIXME: there must be a better way to do this */
-static inline void
-s390_redo_validation (void)
-{
-	CIO_TRACE_EVENT (0, "redoval");
-
-	for_each_subchannel(__s390_redo_validation, NULL);
-}
-
 /*
  * Function: blacklist_parse_proc_parameters
  * parse the stuff which is piped to /proc/cio_ignore
@@ -281,7 +248,7 @@ blacklist_parse_proc_parameters (char *buf)
 		return;
 	}
 
-	s390_redo_validation ();
+	css_schedule_reprobe();
 }
 
 /* Iterator struct for all devices. */

drivers/s390/cio/ccwgroup.c

@@ -404,21 +404,24 @@ ccwgroup_driver_register (struct ccwgroup_driver *cdriver)
 }
 
 static int
-__ccwgroup_driver_unregister_device(struct device *dev, void *data)
+__ccwgroup_match_all(struct device *dev, void *data)
 {
-	__ccwgroup_remove_symlinks(to_ccwgroupdev(dev));
-	device_unregister(dev);
-	put_device(dev);
-	return 0;
+	return 1;
 }
 
 void
 ccwgroup_driver_unregister (struct ccwgroup_driver *cdriver)
 {
+	struct device *dev;
+
 	/* We don't want ccwgroup devices to live longer than their driver. */
 	get_driver(&cdriver->driver);
-	driver_for_each_device(&cdriver->driver, NULL, NULL,
-			       __ccwgroup_driver_unregister_device);
+	while ((dev = driver_find_device(&cdriver->driver, NULL, NULL,
+					 __ccwgroup_match_all))) {
+		__ccwgroup_remove_symlinks(to_ccwgroupdev(dev));
+		device_unregister(dev);
+		put_device(dev);
+	}
 	put_driver(&cdriver->driver);
 	driver_unregister(&cdriver->driver);
 }

drivers/s390/cio/chsc.c

@@ -244,8 +244,7 @@ s390_subchannel_remove_chpid(struct device *dev, void *data)
 
 	if ((sch->schib.scsw.actl & SCSW_ACTL_DEVACT) &&
 	    (sch->schib.scsw.actl & SCSW_ACTL_SCHACT) &&
-	    (sch->schib.pmcw.lpum == mask) &&
-	    (sch->vpm == 0)) {
+	    (sch->schib.pmcw.lpum == mask)) {
 		int cc;
 
 		cc = cio_clear(sch);
@@ -918,12 +917,13 @@ chp_measurement_read(struct kobject *kobj, char *buf, loff_t off, size_t count)
 	chp = to_channelpath(container_of(kobj, struct device, kobj));
 	css = to_css(chp->dev.parent);
 
-	size = sizeof(struct cmg_chars);
+	size = sizeof(struct cmg_entry);
 
 	/* Only allow single reads. */
 	if (off || count < size)
 		return 0;
 	chp_measurement_copy_block((struct cmg_entry *)buf, css, chp->id);
+	count = size;
 	return count;
 }
 

drivers/s390/cio/css.c

@@ -19,9 +19,11 @@
 #include "cio_debug.h"
 #include "ioasm.h"
 #include "chsc.h"
+#include "device.h"
 
 int need_rescan = 0;
 int css_init_done = 0;
+static int need_reprobe = 0;
 static int max_ssid = 0;
 
 struct channel_subsystem *css[__MAX_CSSID + 1];
@@ -339,6 +341,67 @@ typedef void (*workfunc)(void *);
 DECLARE_WORK(slow_path_work, (workfunc)css_trigger_slow_path, NULL);
 struct workqueue_struct *slow_path_wq;
 
+/* Reprobe subchannel if unregistered. */
+static int reprobe_subchannel(struct subchannel_id schid, void *data)
+{
+	struct subchannel *sch;
+	int ret;
+
+	CIO_DEBUG(KERN_INFO, 6, "cio: reprobe 0.%x.%04x\n",
+		  schid.ssid, schid.sch_no);
+	if (need_reprobe)
+		return -EAGAIN;
+
+	sch = get_subchannel_by_schid(schid);
+	if (sch) {
+		/* Already known. */
+		put_device(&sch->dev);
+		return 0;
+	}
+
+	ret = css_probe_device(schid);
+	switch (ret) {
+	case 0:
+		break;
+	case -ENXIO:
+	case -ENOMEM:
+		/* These should abort looping */
+		break;
+	default:
+		ret = 0;
+	}
+
+	return ret;
+}
+
+/* Work function used to reprobe all unregistered subchannels. */
+static void reprobe_all(void *data)
+{
+	int ret;
+
+	CIO_MSG_EVENT(2, "reprobe start\n");
+
+	need_reprobe = 0;
+	/* Make sure initial subchannel scan is done. */
+	wait_event(ccw_device_init_wq,
+		   atomic_read(&ccw_device_init_count) == 0);
+	ret = for_each_subchannel(reprobe_subchannel, NULL);
+
+	CIO_MSG_EVENT(2, "reprobe done (rc=%d, need_reprobe=%d)\n", ret,
+		      need_reprobe);
+}
+
+DECLARE_WORK(css_reprobe_work, reprobe_all, NULL);
+
+/* Schedule reprobing of all unregistered subchannels. */
+void css_schedule_reprobe(void)
+{
+	need_reprobe = 1;
+	queue_work(ccw_device_work, &css_reprobe_work);
+}
+
+EXPORT_SYMBOL_GPL(css_schedule_reprobe);
+
 /*
  * Rescan for new devices. FIXME: This is slow.
  * This function is called when we have lost CRWs due to overflows and we have

drivers/s390/cio/device.c

@@ -133,8 +133,8 @@ struct css_driver io_subchannel_driver = {
 
 struct workqueue_struct *ccw_device_work;
 struct workqueue_struct *ccw_device_notify_work;
-static wait_queue_head_t ccw_device_init_wq;
-static atomic_t ccw_device_init_count;
+wait_queue_head_t ccw_device_init_wq;
+atomic_t ccw_device_init_count;
 
 static int __init
 init_ccw_bus_type (void)

drivers/s390/cio/device.h

 #ifndef S390_DEVICE_H
 #define S390_DEVICE_H
 
+#include <asm/ccwdev.h>
+#include <asm/atomic.h>
+#include <linux/wait.h>
+
 /*
  * states of the device statemachine
  */
@@ -23,6 +27,7 @@ enum dev_state {
 	DEV_STATE_DISCONNECTED,
 	DEV_STATE_DISCONNECTED_SENSE_ID,
 	DEV_STATE_CMFCHANGE,
+	DEV_STATE_CMFUPDATE,
 	/* last element! */
 	NR_DEV_STATES
 };
@@ -67,6 +72,8 @@ dev_fsm_final_state(struct ccw_device *cdev)
 
 extern struct workqueue_struct *ccw_device_work;
 extern struct workqueue_struct *ccw_device_notify_work;
+extern wait_queue_head_t ccw_device_init_wq;
+extern atomic_t ccw_device_init_count;
 
 void io_subchannel_recog_done(struct ccw_device *cdev);
 
@@ -112,5 +119,8 @@ int ccw_device_stlck(struct ccw_device *);
 void ccw_device_set_timeout(struct ccw_device *, int);
 extern struct subchannel_id ccw_device_get_subchannel_id(struct ccw_device *);
 
+/* Channel measurement facility related */
 void retry_set_schib(struct ccw_device *cdev);
+void cmf_retry_copy_block(struct ccw_device *);
+int cmf_reenable(struct ccw_device *);
 #endif

drivers/s390/cio/device_fsm.c

@@ -336,8 +336,11 @@ ccw_device_oper_notify(void *data)
 	if (!ret)
 		/* Driver doesn't want device back. */
 		ccw_device_do_unreg_rereg((void *)cdev);
-	else
+	else {
+		/* Reenable channel measurements, if needed. */
+		cmf_reenable(cdev);
 		wake_up(&cdev->private->wait_q);
+	}
 }
 
 /*
@@ -861,6 +864,8 @@ ccw_device_clear_verify(struct ccw_device *cdev, enum dev_event dev_event)
 	irb = (struct irb *) __LC_IRB;
 	/* Accumulate status. We don't do basic sense. */
 	ccw_device_accumulate_irb(cdev, irb);
+	/* Remember to clear irb to avoid residuals. */
+	memset(&cdev->private->irb, 0, sizeof(struct irb));
 	/* Try to start delayed device verification. */
 	ccw_device_online_verify(cdev, 0);
 	/* Note: Don't call handler for cio initiated clear! */
@@ -1093,6 +1098,13 @@ ccw_device_change_cmfstate(struct ccw_device *cdev, enum dev_event dev_event)
 	dev_fsm_event(cdev, dev_event);
 }
 
+static void ccw_device_update_cmfblock(struct ccw_device *cdev,
+				       enum dev_event dev_event)
+{
+	cmf_retry_copy_block(cdev);
+	cdev->private->state = DEV_STATE_ONLINE;
+	dev_fsm_event(cdev, dev_event);
+}
 
 static void
 ccw_device_quiesce_done(struct ccw_device *cdev, enum dev_event dev_event)
@@ -1247,6 +1259,12 @@ fsm_func_t *dev_jumptable[NR_DEV_STATES][NR_DEV_EVENTS] = {
 		[DEV_EVENT_TIMEOUT]	= ccw_device_change_cmfstate,
 		[DEV_EVENT_VERIFY]	= ccw_device_change_cmfstate,
 	},
+	[DEV_STATE_CMFUPDATE] = {
+		[DEV_EVENT_NOTOPER]	= ccw_device_update_cmfblock,
+		[DEV_EVENT_INTERRUPT]	= ccw_device_update_cmfblock,
+		[DEV_EVENT_TIMEOUT]	= ccw_device_update_cmfblock,
+		[DEV_EVENT_VERIFY]	= ccw_device_update_cmfblock,
+	},
 };
 
 /*

drivers/s390/cio/device_ops.c

@@ -78,7 +78,8 @@ ccw_device_start_key(struct ccw_device *cdev, struct ccw1 *cpa,
 		return -ENODEV;
 	if (cdev->private->state == DEV_STATE_NOT_OPER)
 		return -ENODEV;
-	if (cdev->private->state == DEV_STATE_VERIFY) {
+	if (cdev->private->state == DEV_STATE_VERIFY ||
+	    cdev->private->state == DEV_STATE_CLEAR_VERIFY) {
 		/* Remember to fake irb when finished. */
 		if (!cdev->private->flags.fake_irb) {
 			cdev->private->flags.fake_irb = 1;
@@ -270,7 +271,8 @@ ccw_device_wake_up(struct ccw_device *cdev, unsigned long ip, struct irb *irb)
 		 * We didn't get channel end / device end. Check if path
 		 * verification has been started; we can retry after it has
 		 * finished. We also retry unit checks except for command reject
-		 * or intervention required.
+		 * or intervention required. Also check for long busy
+		 * conditions.
 		 */
 		 if (cdev->private->flags.doverify ||
 			 cdev->private->state == DEV_STATE_VERIFY)
@@ -279,6 +281,10 @@ ccw_device_wake_up(struct ccw_device *cdev, unsigned long ip, struct irb *irb)
 		     !(irb->ecw[0] &
 		       (SNS0_CMD_REJECT | SNS0_INTERVENTION_REQ)))
 			 cdev->private->intparm = -EAGAIN;
+		else if ((irb->scsw.dstat & DEV_STAT_ATTENTION) &&
+			 (irb->scsw.dstat & DEV_STAT_DEV_END) &&
+			 (irb->scsw.dstat & DEV_STAT_UNIT_EXCEP))
+			cdev->private->intparm = -EAGAIN;
 		 else
 			 cdev->private->intparm = -EIO;
 			 

drivers/s390/s390mach.c

@@ -14,6 +14,7 @@
 #include <linux/errno.h>
 #include <linux/workqueue.h>
 #include <linux/time.h>
+#include <linux/kthread.h>
 
 #include <asm/lowcore.h>
 
@@ -56,8 +57,6 @@ s390_collect_crw_info(void *param)
 	unsigned int chain;
 
 	sem = (struct semaphore *)param;
-	/* Set a nice name. */
-	daemonize("kmcheck");
 repeat:
 	down_interruptible(sem);
 	slow = 0;
@@ -516,7 +515,7 @@ arch_initcall(machine_check_init);
 static int __init
 machine_check_crw_init (void)
 {
-	kernel_thread(s390_collect_crw_info, &m_sem, CLONE_FS|CLONE_FILES);
+	kthread_run(s390_collect_crw_info, &m_sem, "kmcheck");
 	ctl_set_bit(14, 28);	/* enable channel report MCH */
 	return 0;
 }

include/asm-s390/bitops.h

@@ -12,6 +12,9 @@
  *    Copyright (C) 1992, Linus Torvalds
  *
  */
+
+#ifdef __KERNEL__
+
 #include <linux/compiler.h>
 
 /*
@@ -50,19 +53,6 @@
  * with operation of the form "set_bit(bitnr, flags)".
  */
 
-/* set ALIGN_CS to 1 if the SMP safe bit operations should
- * align the address to 4 byte boundary. It seems to work
- * without the alignment. 
- */
-#ifdef __KERNEL__
-#define ALIGN_CS 0
-#else
-#define ALIGN_CS 1
-#ifndef CONFIG_SMP
-#error "bitops won't work without CONFIG_SMP"
-#endif
-#endif
-
 /* bitmap tables from arch/S390/kernel/bitmap.S */
 extern const char _oi_bitmap[];
 extern const char _ni_bitmap[];
@@ -121,10 +111,6 @@ static inline void set_bit_cs(unsigned long nr, volatile unsigned long *ptr)
         unsigned long addr, old, new, mask;
 
 	addr = (unsigned long) ptr;
-#if ALIGN_CS == 1
-	nr += (addr & __BITOPS_ALIGN) << 3;    /* add alignment to bit number */
-	addr ^= addr & __BITOPS_ALIGN;	       /* align address to 8 */
-#endif
 	/* calculate address for CS */
 	addr += (nr ^ (nr & (__BITOPS_WORDSIZE - 1))) >> 3;
 	/* make OR mask */
@@ -141,10 +127,6 @@ static inline void clear_bit_cs(unsigned long nr, volatile unsigned long *ptr)
         unsigned long addr, old, new, mask;
 
 	addr = (unsigned long) ptr;
-#if ALIGN_CS == 1
-	nr += (addr & __BITOPS_ALIGN) << 3;    /* add alignment to bit number */
-	addr ^= addr & __BITOPS_ALIGN;	       /* align address to 8 */
-#endif
 	/* calculate address for CS */
 	addr += (nr ^ (nr & (__BITOPS_WORDSIZE - 1))) >> 3;
 	/* make AND mask */
@@ -161,10 +143,6 @@ static inline void change_bit_cs(unsigned long nr, volatile unsigned long *ptr)
         unsigned long addr, old, new, mask;
 
 	addr = (unsigned long) ptr;
-#if ALIGN_CS == 1
-	nr += (addr & __BITOPS_ALIGN) << 3;    /* add alignment to bit number */
-	addr ^= addr & __BITOPS_ALIGN;	       /* align address to 8 */
-#endif
 	/* calculate address for CS */
 	addr += (nr ^ (nr & (__BITOPS_WORDSIZE - 1))) >> 3;
 	/* make XOR mask */
@@ -182,10 +160,6 @@ test_and_set_bit_cs(unsigned long nr, volatile unsigned long *ptr)
         unsigned long addr, old, new, mask;
 
 	addr = (unsigned long) ptr;
-#if ALIGN_CS == 1
-	nr += (addr & __BITOPS_ALIGN) << 3;    /* add alignment to bit number */
-	addr ^= addr & __BITOPS_ALIGN;	       /* align address to 8 */
-#endif
 	/* calculate address for CS */
 	addr += (nr ^ (nr & (__BITOPS_WORDSIZE - 1))) >> 3;
 	/* make OR/test mask */
@@ -205,10 +179,6 @@ test_and_clear_bit_cs(unsigned long nr, volatile unsigned long *ptr)
         unsigned long addr, old, new, mask;
 
 	addr = (unsigned long) ptr;
-#if ALIGN_CS == 1
-	nr += (addr & __BITOPS_ALIGN) << 3;    /* add alignment to bit number */
-	addr ^= addr & __BITOPS_ALIGN;	       /* align address to 8 */
-#endif
 	/* calculate address for CS */
 	addr += (nr ^ (nr & (__BITOPS_WORDSIZE - 1))) >> 3;
 	/* make AND/test mask */
@@ -228,10 +198,6 @@ test_and_change_bit_cs(unsigned long nr, volatile unsigned long *ptr)
         unsigned long addr, old, new, mask;
 
 	addr = (unsigned long) ptr;
-#if ALIGN_CS == 1
-	nr += (addr & __BITOPS_ALIGN) << 3;  /* add alignment to bit number */
-	addr ^= addr & __BITOPS_ALIGN;	     /* align address to 8 */
-#endif
 	/* calculate address for CS */
 	addr += (nr ^ (nr & (__BITOPS_WORDSIZE - 1))) >> 3;
 	/* make XOR/test mask */
@@ -834,8 +800,6 @@ static inline int sched_find_first_bit(unsigned long *b)
 
 #include <asm-generic/bitops/hweight.h>
 
-#ifdef __KERNEL__
-
 /*
  * ATTENTION: intel byte ordering convention for ext2 and minix !!
  * bit 0 is the LSB of addr; bit 31 is the MSB of addr;

include/asm-s390/cio.h

@@ -276,6 +276,8 @@ extern void wait_cons_dev(void);
 
 extern void clear_all_subchannels(void);
 
+extern void css_schedule_reprobe(void);
+
 #endif
 
 #endif

include/asm-s390/cmb.h

@@ -44,10 +44,6 @@ struct cmbdata {
 #define BIODASDCMFENABLE	_IO(DASD_IOCTL_LETTER,32)
 /* enable channel measurement */
 #define BIODASDCMFDISABLE	_IO(DASD_IOCTL_LETTER,33)
-/* reset channel measurement block */
-#define BIODASDRESETCMB		_IO(DASD_IOCTL_LETTER,34)
-/* read channel measurement data */
-#define BIODASDREADCMB		_IOWR(DASD_IOCTL_LETTER,32,__u64)
 /* read channel measurement data */
 #define BIODASDREADALLCMB	_IOWR(DASD_IOCTL_LETTER,33,struct cmbdata)
 

include/asm-s390/dasd.h

@@ -68,10 +68,12 @@ typedef struct dasd_information2_t {
  * 0x00: default features
  * 0x01: readonly (ro)
  * 0x02: use diag discipline (diag)
+ * 0x04: set the device initially online (internal use only)
  */
-#define DASD_FEATURE_DEFAULT  0
-#define DASD_FEATURE_READONLY 1
-#define DASD_FEATURE_USEDIAG  2
+#define DASD_FEATURE_DEFAULT	     0x00
+#define DASD_FEATURE_READONLY	     0x01
+#define DASD_FEATURE_USEDIAG	     0x02
+#define DASD_FEATURE_INITIAL_ONLINE  0x04
 
 #define DASD_PARTN_BITS 2
 

include/asm-s390/thread_info.h

@@ -63,6 +63,7 @@ struct thread_info {
 	.exec_domain	= &default_exec_domain,	\
 	.flags		= 0,			\
 	.cpu		= 0,			\
+	.preempt_count	= 1,			\
 	.restart_block	= {			\
 		.fn = do_no_restart_syscall,	\
 	},					\

include/asm-s390/unistd.h

@@ -394,11 +394,9 @@
 
 #ifdef __KERNEL__
 
-/* user-visible error numbers are in the range -1 - -122: see <asm-s390/errno.h> */
-
 #define __syscall_return(type, res)			     \
 do {							     \
-	if ((unsigned long)(res) >= (unsigned long)(-125)) { \
+	if ((unsigned long)(res) >= (unsigned long)(-4095)) {\
 		errno = -(res);				     \
 		res = -1;				     \
 	}						     \