Commit b0488c45 authored by Lorenzo Bianconi's avatar Lorenzo Bianconi Committed by Paolo Abeni

net: ethernet: mtk_wed: return status value in mtk_wdma_rx_reset

Move MTK_WDMA_RESET_IDX configuration in mtk_wdma_rx_reset routine.
Increase poll timeout to 10ms in order to be aligned with vendor sdk.
This is a preliminary patch to add Wireless Ethernet Dispatcher reset
support.
Co-developed-by: default avatarSujuan Chen <sujuan.chen@mediatek.com>
Signed-off-by: default avatarSujuan Chen <sujuan.chen@mediatek.com>
Signed-off-by: default avatarLorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: default avatarPaolo Abeni <pabeni@redhat.com>
parent 4f5ed7fb
......@@ -101,17 +101,21 @@ mtk_wdma_read_reset(struct mtk_wed_device *dev)
return wdma_r32(dev, MTK_WDMA_GLO_CFG);
}
static void
static int
mtk_wdma_rx_reset(struct mtk_wed_device *dev)
{
u32 status, mask = MTK_WDMA_GLO_CFG_RX_DMA_BUSY;
int i;
int i, ret;
wdma_clr(dev, MTK_WDMA_GLO_CFG, MTK_WDMA_GLO_CFG_RX_DMA_EN);
if (readx_poll_timeout(mtk_wdma_read_reset, dev, status,
!(status & mask), 0, 1000))
ret = readx_poll_timeout(mtk_wdma_read_reset, dev, status,
!(status & mask), 0, 10000);
if (ret)
dev_err(dev->hw->dev, "rx reset failed\n");
wdma_w32(dev, MTK_WDMA_RESET_IDX, MTK_WDMA_RESET_IDX_RX);
wdma_w32(dev, MTK_WDMA_RESET_IDX, 0);
for (i = 0; i < ARRAY_SIZE(dev->rx_wdma); i++) {
if (dev->rx_wdma[i].desc)
continue;
......@@ -119,6 +123,8 @@ mtk_wdma_rx_reset(struct mtk_wed_device *dev)
wdma_w32(dev,
MTK_WDMA_RING_RX(i) + MTK_WED_RING_OFS_CPU_IDX, 0);
}
return ret;
}
static void
......@@ -565,9 +571,7 @@ mtk_wed_detach(struct mtk_wed_device *dev)
mtk_wed_stop(dev);
wdma_w32(dev, MTK_WDMA_RESET_IDX, MTK_WDMA_RESET_IDX_RX);
wdma_w32(dev, MTK_WDMA_RESET_IDX, 0);
mtk_wdma_rx_reset(dev);
mtk_wed_reset(dev, MTK_WED_RESET_WED);
if (mtk_wed_get_rx_capa(dev)) {
wdma_clr(dev, MTK_WDMA_GLO_CFG, MTK_WDMA_GLO_CFG_TX_DMA_EN);
......@@ -582,7 +586,6 @@ mtk_wed_detach(struct mtk_wed_device *dev)
mtk_wed_wo_reset(dev);
mtk_wed_free_rx_rings(dev);
mtk_wed_wo_deinit(hw);
mtk_wdma_rx_reset(dev);
}
if (dev->wlan.bus_type == MTK_WED_BUS_PCIE) {
......@@ -999,10 +1002,6 @@ mtk_wed_reset_dma(struct mtk_wed_device *dev)
wed_w32(dev, MTK_WED_RESET_IDX, 0);
}
wdma_w32(dev, MTK_WDMA_RESET_IDX, MTK_WDMA_RESET_IDX_RX);
wdma_w32(dev, MTK_WDMA_RESET_IDX, 0);
if (mtk_wed_get_rx_capa(dev))
mtk_wdma_rx_reset(dev);
if (busy) {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment