Merge tag 'staging-3.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

Staging tree patches for 3.3-rc3

Big things here is the deletion of the Android pmem driver, as it's
obsolete and no one uses it, the gma500 driver as it's already in the
drm portion of the kernel tree, and the pohmelfs filesystem as it's
obsolete and a rewritten version is being proposed for the fs/ section
of the kernel.

Other than that, a smattering of different bugfixes and regressions, and
some omap drm api merge fixups that were needed due to api changes in
the main portion of the drm tree, allowing this code to build properly
again.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

* tag 'staging-3.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (28 commits)
  staging: pohmelfs: remove drivers/staging/pohmelfs
  staging: android/ram_console: Don't build on arches w/o ioremap
  staging: r8712u: Use asynchronous firmware loading
  staging: usbip: fix to prevent potentially using uninitialized spinlock
  staging: r8712u: Fix problem when CONFIG_R8712_AP is set
  staging: tidspbridge: fix incorrect free to drv_datap
  staging: tidspbridge: fix bridge_open memory leaks
  staging: android: lowmemorykiller: Don't wait more than one second for a process to die
  MAINTAINERS: staging: iio: add iio information
  staging: zcache: fix serialization bug in zv stats
  staging: fix go7007-usb license
  Staging: android: binder: Fix crashes when sharing a binder file between processes
  Staging: android: Remove pmem driver
  Staging: asus_oled: fix NULL-ptr crash on unloading
  Staging: asus_oled: fix image processing
  Staging: android: binder: Don't call dump_stack in binder_vma_open
  staging: r8712u: Add new Sitecom UsB ID
  zcache: Set SWIZ_BITS to 8 to reduce tmem bucket lock contention.
  zcache: fix deadlock condition
  staging: drm/omap: fix locking issue
  ...

MAINTAINERS

@@ -3318,6 +3318,12 @@ S:	Maintained
 F:	net/ieee802154/
 F:	drivers/ieee802154/
 
+IIO SUBSYSTEM AND DRIVERS
+M:	Jonathan Cameron <jic23@cam.ac.uk>
+L:	linux-iio@vger.kernel.org
+S:	Maintained
+F:	drivers/staging/iio/
+
 IKANOS/ADI EAGLE ADSL USB DRIVER
 M:	Matthieu Castet <castet.matthieu@free.fr>
 M:	Stanislaw Gruszka <stf_xl@wp.pl>

drivers/staging/Kconfig

@@ -60,8 +60,6 @@ source "drivers/staging/rts5139/Kconfig"
 
 source "drivers/staging/frontier/Kconfig"
 
-source "drivers/staging/pohmelfs/Kconfig"
-
 source "drivers/staging/phison/Kconfig"
 
 source "drivers/staging/line6/Kconfig"
@@ -120,8 +118,6 @@ source "drivers/staging/cptm1217/Kconfig"
 
 source "drivers/staging/ste_rmi4/Kconfig"
 
-source "drivers/staging/gma500/Kconfig"
-
 source "drivers/staging/mei/Kconfig"
 
 source "drivers/staging/nvec/Kconfig"

drivers/staging/Makefile

@@ -22,7 +22,6 @@ obj-$(CONFIG_R8712U)		+= rtl8712/
 obj-$(CONFIG_RTS_PSTOR)		+= rts_pstor/
 obj-$(CONFIG_RTS5139)		+= rts5139/
 obj-$(CONFIG_TRANZPORT)		+= frontier/
-obj-$(CONFIG_POHMELFS)		+= pohmelfs/
 obj-$(CONFIG_IDE_PHISON)	+= phison/
 obj-$(CONFIG_LINE6_USB)		+= line6/
 obj-$(CONFIG_USB_SERIAL_QUATECH2)	+= serqt_usb2/
@@ -52,7 +51,6 @@ obj-$(CONFIG_FT1000)		+= ft1000/
 obj-$(CONFIG_SPEAKUP)		+= speakup/
 obj-$(CONFIG_TOUCHSCREEN_CLEARPAD_TM1217)	+= cptm1217/
 obj-$(CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4)	+= ste_rmi4/
-obj-$(CONFIG_DRM_PSB)		+= gma500/
 obj-$(CONFIG_INTEL_MEI)		+= mei/
 obj-$(CONFIG_MFD_NVEC)		+= nvec/
 obj-$(CONFIG_DRM_OMAP)		+= omapdrm/

drivers/staging/android/Kconfig

@@ -27,6 +27,7 @@ config ANDROID_LOGGER
 
 config ANDROID_RAM_CONSOLE
 	bool "Android RAM buffer console"
+	depends on !S390 && !UML
 	default n
 
 config ANDROID_RAM_CONSOLE_ENABLE_VERBOSE
@@ -99,10 +100,6 @@ config ANDROID_LOW_MEMORY_KILLER
 	---help---
 	  Register processes to be killed when memory is low
 
-config ANDROID_PMEM
-	bool "Android pmem allocator"
-	depends on ARM
-
 source "drivers/staging/android/switch/Kconfig"
 
 endif # if ANDROID

drivers/staging/android/Makefile

@@ -5,5 +5,4 @@ obj-$(CONFIG_ANDROID_RAM_CONSOLE)	+= ram_console.o
 obj-$(CONFIG_ANDROID_TIMED_OUTPUT)	+= timed_output.o
 obj-$(CONFIG_ANDROID_TIMED_GPIO)	+= timed_gpio.o
 obj-$(CONFIG_ANDROID_LOW_MEMORY_KILLER)	+= lowmemorykiller.o
-obj-$(CONFIG_ANDROID_PMEM)		+= pmem.o
 obj-$(CONFIG_ANDROID_SWITCH)		+= switch/

drivers/staging/android/android_pmem.h

-/* include/linux/android_pmem.h
- *
- * Copyright (C) 2007 Google, Inc.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of 
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef _ANDROID_PMEM_H_
-#define _ANDROID_PMEM_H_
-
-#define PMEM_IOCTL_MAGIC 'p'
-#define PMEM_GET_PHYS		_IOW(PMEM_IOCTL_MAGIC, 1, unsigned int)
-#define PMEM_MAP		_IOW(PMEM_IOCTL_MAGIC, 2, unsigned int)
-#define PMEM_GET_SIZE		_IOW(PMEM_IOCTL_MAGIC, 3, unsigned int)
-#define PMEM_UNMAP		_IOW(PMEM_IOCTL_MAGIC, 4, unsigned int)
-/* This ioctl will allocate pmem space, backing the file, it will fail
- * if the file already has an allocation, pass it the len as the argument
- * to the ioctl */
-#define PMEM_ALLOCATE		_IOW(PMEM_IOCTL_MAGIC, 5, unsigned int)
-/* This will connect a one pmem file to another, pass the file that is already
- * backed in memory as the argument to the ioctl
- */
-#define PMEM_CONNECT		_IOW(PMEM_IOCTL_MAGIC, 6, unsigned int)
-/* Returns the total size of the pmem region it is sent to as a pmem_region
- * struct (with offset set to 0). 
- */
-#define PMEM_GET_TOTAL_SIZE	_IOW(PMEM_IOCTL_MAGIC, 7, unsigned int)
-#define PMEM_CACHE_FLUSH	_IOW(PMEM_IOCTL_MAGIC, 8, unsigned int)
-
-struct android_pmem_platform_data
-{
-	const char* name;
-	/* starting physical address of memory region */
-	unsigned long start;
-	/* size of memory region */
-	unsigned long size;
-	/* set to indicate the region should not be managed with an allocator */
-	unsigned no_allocator;
-	/* set to indicate maps of this region should be cached, if a mix of
-	 * cached and uncached is desired, set this and open the device with
-	 * O_SYNC to get an uncached region */
-	unsigned cached;
-	/* The MSM7k has bits to enable a write buffer in the bus controller*/
-	unsigned buffered;
-};
-
-struct pmem_region {
-	unsigned long offset;
-	unsigned long len;
-};
-
-#ifdef CONFIG_ANDROID_PMEM
-int is_pmem_file(struct file *file);
-int get_pmem_file(int fd, unsigned long *start, unsigned long *vstart,
-		  unsigned long *end, struct file **filp);
-int get_pmem_user_addr(struct file *file, unsigned long *start,
-		       unsigned long *end);
-void put_pmem_file(struct file* file);
-void flush_pmem_file(struct file *file, unsigned long start, unsigned long len);
-int pmem_setup(struct android_pmem_platform_data *pdata,
-	       long (*ioctl)(struct file *, unsigned int, unsigned long),
-	       int (*release)(struct inode *, struct file *));
-int pmem_remap(struct pmem_region *region, struct file *file,
-	       unsigned operation);
-
-#else
-static inline int is_pmem_file(struct file *file) { return 0; }
-static inline int get_pmem_file(int fd, unsigned long *start,
-				unsigned long *vstart, unsigned long *end,
-				struct file **filp) { return -ENOSYS; }
-static inline int get_pmem_user_addr(struct file *file, unsigned long *start,
-				     unsigned long *end) { return -ENOSYS; }
-static inline void put_pmem_file(struct file* file) { return; }
-static inline void flush_pmem_file(struct file *file, unsigned long start,
-				   unsigned long len) { return; }
-static inline int pmem_setup(struct android_pmem_platform_data *pdata,
-	      long (*ioctl)(struct file *, unsigned int, unsigned long),
-	      int (*release)(struct inode *, struct file *)) { return -ENOSYS; }
-
-static inline int pmem_remap(struct pmem_region *region, struct file *file,
-			     unsigned operation) { return -ENOSYS; }
-#endif
-
-#endif //_ANDROID_PPP_H_
-

drivers/staging/android/binder.c

@@ -38,6 +38,7 @@
 
 static DEFINE_MUTEX(binder_lock);
 static DEFINE_MUTEX(binder_deferred_lock);
+static DEFINE_MUTEX(binder_mmap_lock);
 
 static HLIST_HEAD(binder_procs);
 static HLIST_HEAD(binder_deferred_list);
@@ -632,6 +633,11 @@ static int binder_update_page_range(struct binder_proc *proc, int allocate,
 	if (mm) {
 		down_write(&mm->mmap_sem);
 		vma = proc->vma;
+		if (vma && mm != vma->vm_mm) {
+			pr_err("binder: %d: vma mm and task mm mismatch\n",
+				proc->pid);
+			vma = NULL;
+		}
 	}
 
 	if (allocate == 0)
@@ -2759,7 +2765,6 @@ static void binder_vma_open(struct vm_area_struct *vma)
 		     proc->pid, vma->vm_start, vma->vm_end,
 		     (vma->vm_end - vma->vm_start) / SZ_1K, vma->vm_flags,
 		     (unsigned long)pgprot_val(vma->vm_page_prot));
-	dump_stack();
 }
 
 static void binder_vma_close(struct vm_area_struct *vma)
@@ -2803,6 +2808,7 @@ static int binder_mmap(struct file *filp, struct vm_area_struct *vma)
 	}
 	vma->vm_flags = (vma->vm_flags | VM_DONTCOPY) & ~VM_MAYWRITE;
 
+	mutex_lock(&binder_mmap_lock);
 	if (proc->buffer) {
 		ret = -EBUSY;
 		failure_string = "already mapped";
@@ -2817,6 +2823,7 @@ static int binder_mmap(struct file *filp, struct vm_area_struct *vma)
 	}
 	proc->buffer = area->addr;
 	proc->user_buffer_offset = vma->vm_start - (uintptr_t)proc->buffer;
+	mutex_unlock(&binder_mmap_lock);
 
 #ifdef CONFIG_CPU_CACHE_VIPT
 	if (cache_is_vipt_aliasing()) {
@@ -2849,7 +2856,7 @@ static int binder_mmap(struct file *filp, struct vm_area_struct *vma)
 	binder_insert_free_buffer(proc, buffer);
 	proc->free_async_space = proc->buffer_size / 2;
 	barrier();
-	proc->files = get_files_struct(current);
+	proc->files = get_files_struct(proc->tsk);
 	proc->vma = vma;
 
 	/*printk(KERN_INFO "binder_mmap: %d %lx-%lx maps %p\n",
@@ -2860,10 +2867,12 @@ static int binder_mmap(struct file *filp, struct vm_area_struct *vma)
 	kfree(proc->pages);
 	proc->pages = NULL;
 err_alloc_pages_failed:
+	mutex_lock(&binder_mmap_lock);
 	vfree(proc->buffer);
 	proc->buffer = NULL;
 err_get_vm_area_failed:
 err_already_mapped:
+	mutex_unlock(&binder_mmap_lock);
 err_bad_arg:
 	printk(KERN_ERR "binder_mmap: %d %lx-%lx %s failed %d\n",
 	       proc->pid, vma->vm_start, vma->vm_end, failure_string, ret);

drivers/staging/android/lowmemorykiller.c

@@ -54,6 +54,7 @@ static size_t lowmem_minfree[6] = {
 static int lowmem_minfree_size = 4;
 
 static struct task_struct *lowmem_deathpending;
+static unsigned long lowmem_deathpending_timeout;
 
 #define lowmem_print(level, x...)			\
 	do {						\
@@ -103,7 +104,8 @@ static int lowmem_shrink(struct shrinker *s, struct shrink_control *sc)
 	 * Note: Currently you need CONFIG_PROFILING
 	 * for this to work correctly.
 	 */
-	if (lowmem_deathpending)
+	if (lowmem_deathpending &&
+	    time_before_eq(jiffies, lowmem_deathpending_timeout))
 		return 0;
 
 	if (lowmem_adj_size < array_size)
@@ -178,6 +180,7 @@ static int lowmem_shrink(struct shrinker *s, struct shrink_control *sc)
 		 */
 #ifdef CONFIG_PROFILING
 		lowmem_deathpending = selected;
+		lowmem_deathpending_timeout = jiffies + HZ;
 		task_handoff_register(&task_nb);
 #endif
 		force_sig(SIGKILL, selected);

drivers/staging/asus_oled/asus_oled.c

@@ -355,7 +355,14 @@ static void send_data(struct asus_oled_dev *odev)
 
 static int append_values(struct asus_oled_dev *odev, uint8_t val, size_t count)
 {
-	while (count-- > 0 && val) {
+	odev->last_val = val;
+
+	if (val == 0) {
+		odev->buf_offs += count;
+		return 0;
+	}
+
+	while (count-- > 0) {
 		size_t x = odev->buf_offs % odev->width;
 		size_t y = odev->buf_offs / odev->width;
 		size_t i;
@@ -406,7 +413,6 @@ static int append_values(struct asus_oled_dev *odev, uint8_t val, size_t count)
 			;
 		}
 
-		odev->last_val = val;
 		odev->buf_offs++;
 	}
 
@@ -805,10 +811,9 @@ static int __init asus_oled_init(void)
 
 static void __exit asus_oled_exit(void)
 {
+	usb_deregister(&oled_driver);
 	class_remove_file(oled_class, &class_attr_version.attr);
 	class_destroy(oled_class);
-
-	usb_deregister(&oled_driver);
 }
 
 module_init(asus_oled_init);

drivers/staging/gma500/Kconfig

-config DRM_PSB
-	tristate "Intel GMA5/600 KMS Framebuffer"
-	depends on DRM && PCI && X86 && BROKEN
-	select FB_CFB_COPYAREA
-        select FB_CFB_FILLRECT
-        select FB_CFB_IMAGEBLIT
-        select DRM_KMS_HELPER
-        select DRM_TTM
-	help
-	  Say yes for an experimental 2D KMS framebuffer driver for the
-	  Intel GMA500 ('Poulsbo') and other Intel IMG based graphics
-	  devices.
-
-config DRM_PSB_MRST
-	bool "Intel GMA600 support (Experimental)"
-	depends on DRM_PSB
-	help
-	  Say yes to include support for GMA600 (Intel Moorestown/Oaktrail)
-	  platforms with LVDS ports. HDMI and MIPI are not currently
-	  supported.
-
-config DRM_PSB_MFLD
-	bool "Intel Medfield support (Experimental)"
-	depends on DRM_PSB
-	help
-	  Say yes to include support for Intel Medfield platforms with MIPI
-	  interfaces.
-	
-config DRM_PSB_CDV
-	bool "Intel Cedarview support (Experimental)"
-	depends on DRM_PSB
-	help
-	  Say yes to include support for Intel Cedarview platforms

drivers/staging/gma500/Makefile

-#
-#	KMS driver for the GMA500
-#
-ccflags-y += -Iinclude/drm
-
-psb_gfx-y += gem_glue.o \
-	  accel_2d.o \
-	  backlight.o \
-	  framebuffer.o \
-	  gem.o \
-	  gtt.o \
-	  intel_bios.o \
-	  intel_i2c.o \
-	  intel_opregion.o \
-	  mmu.o \
-	  power.o \
-	  psb_drv.o \
-	  psb_intel_display.o \
-	  psb_intel_lvds.o \
-	  psb_intel_modes.o \
-	  psb_intel_sdvo.o \
-	  psb_lid.o \
-	  psb_irq.o \
-	  psb_device.o \
-	  mid_bios.o
-
-psb_gfx-$(CONFIG_DRM_PSB_CDV) +=  cdv_device.o \
-	  cdv_intel_crt.o \
-	  cdv_intel_display.o \
-	  cdv_intel_hdmi.o \
-	  cdv_intel_lvds.o
-
-psb_gfx-$(CONFIG_DRM_PSB_MRST) += mrst_device.o \
-	  mrst_crtc.o \
-	  mrst_lvds.o \
-	  mrst_hdmi.o \
-	  mrst_hdmi_i2c.o
-
-psb_gfx-$(CONFIG_DRM_PSB_MFLD) += mdfld_device.o \
-	  mdfld_output.o \
-	  mdfld_pyr_cmd.o \
-	  mdfld_tmd_vid.o \
-	  mdfld_tpo_cmd.o \
-	  mdfld_tpo_vid.o \
-	  mdfld_dsi_pkg_sender.o \
-	  mdfld_dsi_dpi.o \
-	  mdfld_dsi_output.o \
-	  mdfld_dsi_dbi.o \
-	  mdfld_dsi_dbi_dpu.o \
-	  mdfld_intel_display.o
-
-obj-$(CONFIG_DRM_PSB) += psb_gfx.o

drivers/staging/gma500/TODO

--	Sort out the power management side. Not important for Poulsbo but
-	matters for Moorestown/Medfield
--	Debug Oaktrail/Moorestown support (single pipe, no BIOS on mrst,
-					some other differences)
--	Add 2D acceleration via console and DRM
--	Add scrolling acceleration using the GTT to do remapping on the main
-	framebuffer.
--	HDMI testing
--	Oaktrail HDMI and other features
--	Oaktrail MIPI
--	Medfield needs a lot of further love
-
-As per kernel policy and the in the interest of the safety of various
-kittens there is no support or plans to add hooks for the closed user space
-stuff.

drivers/staging/gma500/backlight.c

-/*
- * GMA500 Backlight Interface
- *
- * Copyright (c) 2009-2011, Intel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
- *
- * Authors: Eric Knopp
- *
- */
-
-#include "psb_drv.h"
-#include "psb_intel_reg.h"
-#include "psb_intel_drv.h"
-#include "intel_bios.h"
-#include "power.h"
-
-int gma_backlight_init(struct drm_device *dev)
-{
-#ifdef CONFIG_BACKLIGHT_CLASS_DEVICE
-	struct drm_psb_private *dev_priv = dev->dev_private;
-	return dev_priv->ops->backlight_init(dev);
-#else
-	return 0;
-#endif
-}
-
-void gma_backlight_exit(struct drm_device *dev)
-{
-#ifdef CONFIG_BACKLIGHT_CLASS_DEVICE
-	struct drm_psb_private *dev_priv = dev->dev_private;
-	if (dev_priv->backlight_device) {
-		dev_priv->backlight_device->props.brightness = 0;
-		backlight_update_status(dev_priv->backlight_device);
-		backlight_device_unregister(dev_priv->backlight_device);
-	}
-#endif
-}

drivers/staging/gma500/cdv_device.c

-/**************************************************************************
- * Copyright (c) 2011, Intel Corporation.
- * All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
- *
- **************************************************************************/
-
-#include <linux/backlight.h>
-#include <drm/drmP.h>
-#include <drm/drm.h>
-#include "psb_drm.h"
-#include "psb_drv.h"
-#include "psb_reg.h"
-#include "psb_intel_reg.h"
-#include "intel_bios.h"
-#include "cdv_device.h"
-
-#define VGA_SR_INDEX		0x3c4
-#define VGA_SR_DATA		0x3c5
-
-static void cdv_disable_vga(struct drm_device *dev)
-{
-	u8 sr1;
-	u32 vga_reg;
-
-	vga_reg = VGACNTRL;
-
-	outb(1, VGA_SR_INDEX);
-	sr1 = inb(VGA_SR_DATA);
-	outb(sr1 | 1<<5, VGA_SR_DATA);
-	udelay(300);
-
-	REG_WRITE(vga_reg, VGA_DISP_DISABLE);
-	REG_READ(vga_reg);
-}
-
-static int cdv_output_init(struct drm_device *dev)
-{
-	struct drm_psb_private *dev_priv = dev->dev_private;
-	cdv_disable_vga(dev);
-
-	cdv_intel_crt_init(dev, &dev_priv->mode_dev);
-	cdv_intel_lvds_init(dev, &dev_priv->mode_dev);
-
-	/* These bits indicate HDMI not SDVO on CDV, but we don't yet support
-	   the HDMI interface */
-	if (REG_READ(SDVOB) & SDVO_DETECTED)
-		cdv_hdmi_init(dev, &dev_priv->mode_dev, SDVOB);
-	if (REG_READ(SDVOC) & SDVO_DETECTED)
-		cdv_hdmi_init(dev, &dev_priv->mode_dev, SDVOC);
-	return 0;
-}
-
-#ifdef CONFIG_BACKLIGHT_CLASS_DEVICE
-
-/*
- *	Poulsbo Backlight Interfaces
- */
-
-#define BLC_PWM_PRECISION_FACTOR 100	/* 10000000 */
-#define BLC_PWM_FREQ_CALC_CONSTANT 32
-#define MHz 1000000
-
-#define PSB_BLC_PWM_PRECISION_FACTOR    10
-#define PSB_BLC_MAX_PWM_REG_FREQ        0xFFFE
-#define PSB_BLC_MIN_PWM_REG_FREQ        0x2
-
-#define PSB_BACKLIGHT_PWM_POLARITY_BIT_CLEAR (0xFFFE)
-#define PSB_BACKLIGHT_PWM_CTL_SHIFT	(16)
-
-static int cdv_brightness;
-static struct backlight_device *cdv_backlight_device;
-
-static int cdv_get_brightness(struct backlight_device *bd)
-{
-	/* return locally cached var instead of HW read (due to DPST etc.) */
-	/* FIXME: ideally return actual value in case firmware fiddled with
-	   it */
-	return cdv_brightness;
-}
-
-
-static int cdv_backlight_setup(struct drm_device *dev)
-{
-	struct drm_psb_private *dev_priv = dev->dev_private;
-	unsigned long core_clock;
-	/* u32 bl_max_freq; */
-	/* unsigned long value; */
-	u16 bl_max_freq;
-	uint32_t value;
-	uint32_t blc_pwm_precision_factor;
-
-	/* get bl_max_freq and pol from dev_priv*/
-	if (!dev_priv->lvds_bl) {
-		dev_err(dev->dev, "Has no valid LVDS backlight info\n");
-		return -ENOENT;
-	}
-	bl_max_freq = dev_priv->lvds_bl->freq;
-	blc_pwm_precision_factor = PSB_BLC_PWM_PRECISION_FACTOR;
-
-	core_clock = dev_priv->core_freq;
-
-	value = (core_clock * MHz) / BLC_PWM_FREQ_CALC_CONSTANT;
-	value *= blc_pwm_precision_factor;
-	value /= bl_max_freq;
-	value /= blc_pwm_precision_factor;
-
-	if (value > (unsigned long long)PSB_BLC_MAX_PWM_REG_FREQ ||
-		 value < (unsigned long long)PSB_BLC_MIN_PWM_REG_FREQ)
-				return -ERANGE;
-	else {
-		/* FIXME */
-	}
-	return 0;
-}
-
-static int cdv_set_brightness(struct backlight_device *bd)
-{
-	int level = bd->props.brightness;
-
-	/* Percentage 1-100% being valid */
-	if (level < 1)
-		level = 1;
-
-	/*cdv_intel_lvds_set_brightness(dev, level); FIXME */
-	cdv_brightness = level;
-	return 0;
-}
-
-static const struct backlight_ops cdv_ops = {
-	.get_brightness = cdv_get_brightness,
-	.update_status  = cdv_set_brightness,
-};
-
-static int cdv_backlight_init(struct drm_device *dev)
-{
-	struct drm_psb_private *dev_priv = dev->dev_private;
-	int ret;
-	struct backlight_properties props;
-
-	memset(&props, 0, sizeof(struct backlight_properties));
-	props.max_brightness = 100;
-	props.type = BACKLIGHT_PLATFORM;
-
-	cdv_backlight_device = backlight_device_register("psb-bl",
-					NULL, (void *)dev, &cdv_ops, &props);
-	if (IS_ERR(cdv_backlight_device))
-		return PTR_ERR(cdv_backlight_device);
-
-	ret = cdv_backlight_setup(dev);
-	if (ret < 0) {
-		backlight_device_unregister(cdv_backlight_device);
-		cdv_backlight_device = NULL;
-		return ret;
-	}
-	cdv_backlight_device->props.brightness = 100;
-	cdv_backlight_device->props.max_brightness = 100;
-	backlight_update_status(cdv_backlight_device);
-	dev_priv->backlight_device = cdv_backlight_device;
-	return 0;
-}
-
-#endif
-
-/*
- *	Provide the Cedarview specific chip logic and low level methods
- *	for power management
- *
- *	FIXME: we need to implement the apm/ospm base management bits
- *	for this and the MID devices.
- */
-
-static inline u32 CDV_MSG_READ32(uint port, uint offset)
-{
-	int mcr = (0x10<<24) | (port << 16) | (offset << 8);
-	uint32_t ret_val = 0;
-	struct pci_dev *pci_root = pci_get_bus_and_slot(0, 0);
-	pci_write_config_dword(pci_root, 0xD0, mcr);
-	pci_read_config_dword(pci_root, 0xD4, &ret_val);
-	pci_dev_put(pci_root);
-	return ret_val;
-}
-
-static inline void CDV_MSG_WRITE32(uint port, uint offset, u32 value)
-{
-	int mcr = (0x11<<24) | (port << 16) | (offset << 8) | 0xF0;
-	struct pci_dev *pci_root = pci_get_bus_and_slot(0, 0);
-	pci_write_config_dword(pci_root, 0xD4, value);
-	pci_write_config_dword(pci_root, 0xD0, mcr);
-	pci_dev_put(pci_root);
-}
-
-#define PSB_APM_CMD			0x0
-#define PSB_APM_STS			0x04
-#define PSB_PM_SSC			0x20
-#define PSB_PM_SSS			0x30
-#define PSB_PWRGT_GFX_MASK		0x3
-#define CDV_PWRGT_DISPLAY_CNTR		0x000fc00c
-#define CDV_PWRGT_DISPLAY_STS		0x000fc00c
-
-static void cdv_init_pm(struct drm_device *dev)
-{
-	struct drm_psb_private *dev_priv = dev->dev_private;
-	u32 pwr_cnt;
-	int i;
-
-	dev_priv->apm_base = CDV_MSG_READ32(PSB_PUNIT_PORT,
-							PSB_APMBA) & 0xFFFF;
-	dev_priv->ospm_base = CDV_MSG_READ32(PSB_PUNIT_PORT,
-							PSB_OSPMBA) & 0xFFFF;
-
-	/* Force power on for now */
-	pwr_cnt = inl(dev_priv->apm_base + PSB_APM_CMD);
-	pwr_cnt &= ~PSB_PWRGT_GFX_MASK;
-
-	outl(pwr_cnt, dev_priv->apm_base + PSB_APM_CMD);
-	for (i = 0; i < 5; i++) {
-		u32 pwr_sts = inl(dev_priv->apm_base + PSB_APM_STS);
-		if ((pwr_sts & PSB_PWRGT_GFX_MASK) == 0)
-			break;
-		udelay(10);
-	}
-	pwr_cnt = inl(dev_priv->ospm_base + PSB_PM_SSC);
-	pwr_cnt &= ~CDV_PWRGT_DISPLAY_CNTR;
-	outl(pwr_cnt, dev_priv->ospm_base + PSB_PM_SSC);
-	for (i = 0; i < 5; i++) {
-		u32 pwr_sts = inl(dev_priv->ospm_base + PSB_PM_SSS);
-		if ((pwr_sts & CDV_PWRGT_DISPLAY_STS) == 0)
-			break;
-		udelay(10);
-	}
-}
-
-/**
- *	cdv_save_display_registers	-	save registers lost on suspend
- *	@dev: our DRM device
- *
- *	Save the state we need in order to be able to restore the interface
- *	upon resume from suspend
- *
- *	FIXME: review
- */
-static int cdv_save_display_registers(struct drm_device *dev)
-{
-	return 0;
-}
-
-/**
- *	cdv_restore_display_registers	-	restore lost register state
- *	@dev: our DRM device
- *
- *	Restore register state that was lost during suspend and resume.
- *
- *	FIXME: review
- */
-static int cdv_restore_display_registers(struct drm_device *dev)
-{
-	return 0;
-}
-
-static int cdv_power_down(struct drm_device *dev)
-{
-	return 0;
-}
-
-static int cdv_power_up(struct drm_device *dev)
-{
-	return 0;
-}
-
-/* FIXME ? - shared with Poulsbo */
-static void cdv_get_core_freq(struct drm_device *dev)
-{
-	uint32_t clock;
-	struct pci_dev *pci_root = pci_get_bus_and_slot(0, 0);
-	struct drm_psb_private *dev_priv = dev->dev_private;
-
-	pci_write_config_dword(pci_root, 0xD0, 0xD0050300);
-	pci_read_config_dword(pci_root, 0xD4, &clock);
-	pci_dev_put(pci_root);
-
-	switch (clock & 0x07) {
-	case 0:
-		dev_priv->core_freq = 100;
-		break;
-	case 1:
-		dev_priv->core_freq = 133;
-		break;
-	case 2:
-		dev_priv->core_freq = 150;
-		break;
-	case 3:
-		dev_priv->core_freq = 178;
-		break;
-	case 4:
-		dev_priv->core_freq = 200;
-		break;
-	case 5:
-	case 6:
-	case 7:
-		dev_priv->core_freq = 266;
-	default:
-		dev_priv->core_freq = 0;
-	}
-}
-
-static int cdv_chip_setup(struct drm_device *dev)
-{
-	cdv_get_core_freq(dev);
-	gma_intel_opregion_init(dev);
-	psb_intel_init_bios(dev);
-	return 0;
-}
-
-/* CDV is much like Poulsbo but has MID like SGX offsets and PM */
-
-const struct psb_ops cdv_chip_ops = {
-	.name = "Cedartrail",
-	.accel_2d = 0,
-	.pipes = 2,
-	.sgx_offset = MRST_SGX_OFFSET,
-	.chip_setup = cdv_chip_setup,
-
-	.crtc_helper = &cdv_intel_helper_funcs,
-	.crtc_funcs = &cdv_intel_crtc_funcs,
-
-	.output_init = cdv_output_init,
-
-#ifdef CONFIG_BACKLIGHT_CLASS_DEVICE
-	.backlight_init = cdv_backlight_init,
-#endif
-
-	.init_pm = cdv_init_pm,
-	.save_regs = cdv_save_display_registers,
-	.restore_regs = cdv_restore_display_registers,
-	.power_down = cdv_power_down,
-	.power_up = cdv_power_up,
-};

drivers/staging/gma500/cdv_device.h

-/*
- * Copyright © 2011 Intel Corporation
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc., 
- * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-extern const struct drm_crtc_helper_funcs cdv_intel_helper_funcs;
-extern const struct drm_crtc_funcs cdv_intel_crtc_funcs;
-extern void cdv_intel_crt_init(struct drm_device *dev,
-			struct psb_intel_mode_device *mode_dev);
-extern void cdv_intel_lvds_init(struct drm_device *dev,
-			struct psb_intel_mode_device *mode_dev);
-extern void cdv_hdmi_init(struct drm_device *dev, struct psb_intel_mode_device *mode_dev,
-			int reg);
-extern struct drm_display_mode *cdv_intel_crtc_mode_get(struct drm_device *dev,
-					     struct drm_crtc *crtc);
-
-extern inline void cdv_intel_wait_for_vblank(struct drm_device *dev)
-{
-	/* Wait for 20ms, i.e. one cycle at 50hz. */
-        /* FIXME: msleep ?? */
-	mdelay(20);
-}
-
-

drivers/staging/gma500/cdv_intel_crt.c

-/*
- * Copyright © 2006-2007 Intel Corporation
- *
- * Permission is hereby granted, free of charge, to any person obtaining a
- * copy of this software and associated documentation files (the "Software"),
- * to deal in the Software without restriction, including without limitation
- * the rights to use, copy, modify, merge, publish, distribute, sublicense,
- * and/or sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice (including the next
- * paragraph) shall be included in all copies or substantial portions of the
- * Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
- * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
- * DEALINGS IN THE SOFTWARE.
- *
- * Authors:
- *	Eric Anholt <eric@anholt.net>
- */
-
-#include <linux/i2c.h>
-#include <drm/drmP.h>
-
-#include "intel_bios.h"
-#include "psb_drv.h"
-#include "psb_intel_drv.h"
-#include "psb_intel_reg.h"
-#include "power.h"
-#include <linux/pm_runtime.h>
-
-
-static void cdv_intel_crt_dpms(struct drm_encoder *encoder, int mode)
-{
-	struct drm_device *dev = encoder->dev;
-	u32 temp, reg;
-	reg = ADPA;
-
-	temp = REG_READ(reg);
-	temp &= ~(ADPA_HSYNC_CNTL_DISABLE | ADPA_VSYNC_CNTL_DISABLE);
-	temp &= ~ADPA_DAC_ENABLE;
-
-	switch (mode) {
-	case DRM_MODE_DPMS_ON:
-		temp |= ADPA_DAC_ENABLE;
-		break;
-	case DRM_MODE_DPMS_STANDBY:
-		temp |= ADPA_DAC_ENABLE | ADPA_HSYNC_CNTL_DISABLE;
-		break;
-	case DRM_MODE_DPMS_SUSPEND:
-		temp |= ADPA_DAC_ENABLE | ADPA_VSYNC_CNTL_DISABLE;
-		break;
-	case DRM_MODE_DPMS_OFF:
-		temp |= ADPA_HSYNC_CNTL_DISABLE | ADPA_VSYNC_CNTL_DISABLE;
-		break;
-	}
-
-	REG_WRITE(reg, temp);
-}
-
-static int cdv_intel_crt_mode_valid(struct drm_connector *connector,
-				struct drm_display_mode *mode)
-{
-	int max_clock = 0;
-	if (mode->flags & DRM_MODE_FLAG_DBLSCAN)
-		return MODE_NO_DBLESCAN;
-
-	/* The lowest clock for CDV is 20000KHz */
-	if (mode->clock < 20000)
-		return MODE_CLOCK_LOW;
-
-	/* The max clock for CDV is 355 instead of 400 */
-	max_clock = 355000;
-	if (mode->clock > max_clock)
-		return MODE_CLOCK_HIGH;
-
-	if (mode->hdisplay > 1680 || mode->vdisplay > 1050)
-		return MODE_PANEL;
-
-	return MODE_OK;
-}
-
-static bool cdv_intel_crt_mode_fixup(struct drm_encoder *encoder,
-				 struct drm_display_mode *mode,
-				 struct drm_display_mode *adjusted_mode)
-{
-	return true;
-}
-
-static void cdv_intel_crt_mode_set(struct drm_encoder *encoder,
-			       struct drm_display_mode *mode,
-			       struct drm_display_mode *adjusted_mode)
-{
-
-	struct drm_device *dev = encoder->dev;
-	struct drm_crtc *crtc = encoder->crtc;
-	struct psb_intel_crtc *psb_intel_crtc =
-					to_psb_intel_crtc(crtc);
-	int dpll_md_reg;
-	u32 adpa, dpll_md;
-	u32 adpa_reg;
-
-	if (psb_intel_crtc->pipe == 0)
-		dpll_md_reg = DPLL_A_MD;
-	else
-		dpll_md_reg = DPLL_B_MD;
-
-	adpa_reg = ADPA;
-
-	/*
-	 * Disable separate mode multiplier used when cloning SDVO to CRT
-	 * XXX this needs to be adjusted when we really are cloning
-	 */
-	{
-		dpll_md = REG_READ(dpll_md_reg);
-		REG_WRITE(dpll_md_reg,
-			   dpll_md & ~DPLL_MD_UDI_MULTIPLIER_MASK);
-	}
-
-	adpa = 0;
-	if (adjusted_mode->flags & DRM_MODE_FLAG_PHSYNC)
-		adpa |= ADPA_HSYNC_ACTIVE_HIGH;
-	if (adjusted_mode->flags & DRM_MODE_FLAG_PVSYNC)
-		adpa |= ADPA_VSYNC_ACTIVE_HIGH;
-
-	if (psb_intel_crtc->pipe == 0)
-		adpa |= ADPA_PIPE_A_SELECT;
-	else
-		adpa |= ADPA_PIPE_B_SELECT;
-
-	REG_WRITE(adpa_reg, adpa);
-}
-
-
-/**
- * Uses CRT_HOTPLUG_EN and CRT_HOTPLUG_STAT to detect CRT presence.
- *
- * \return true if CRT is connected.
- * \return false if CRT is disconnected.
- */
-static bool cdv_intel_crt_detect_hotplug(struct drm_connector *connector,
-								bool force)
-{
-	struct drm_device *dev = connector->dev;
-	u32 hotplug_en;
-	int i, tries = 0, ret = false;
-	u32 adpa_orig;
-
-	/* disable the DAC when doing the hotplug detection */
-
-	adpa_orig = REG_READ(ADPA);
-
-	REG_WRITE(ADPA, adpa_orig & ~(ADPA_DAC_ENABLE));
-
-	/*
-	 * On a CDV thep, CRT detect sequence need to be done twice
-	 * to get a reliable result.
-	 */
-	tries = 2;
-
-	hotplug_en = REG_READ(PORT_HOTPLUG_EN);
-	hotplug_en &= ~(CRT_HOTPLUG_DETECT_MASK);
-	hotplug_en |= CRT_HOTPLUG_FORCE_DETECT;
-
-	hotplug_en |= CRT_HOTPLUG_ACTIVATION_PERIOD_64;
-	hotplug_en |= CRT_HOTPLUG_VOLTAGE_COMPARE_50;
-
-	for (i = 0; i < tries ; i++) {
-		unsigned long timeout;
-		/* turn on the FORCE_DETECT */
-		REG_WRITE(PORT_HOTPLUG_EN, hotplug_en);
-		timeout = jiffies + msecs_to_jiffies(1000);
-		/* wait for FORCE_DETECT to go off */
-		do {
-			if (!(REG_READ(PORT_HOTPLUG_EN) &
-					CRT_HOTPLUG_FORCE_DETECT))
-				break;
-			msleep(1);
-		} while (time_after(timeout, jiffies));
-	}
-
-	if ((REG_READ(PORT_HOTPLUG_STAT) & CRT_HOTPLUG_MONITOR_MASK) !=
-	    CRT_HOTPLUG_MONITOR_NONE)
-		ret = true;
-
-	/* Restore the saved ADPA */
-	REG_WRITE(ADPA, adpa_orig);
-	return ret;
-}
-
-static enum drm_connector_status cdv_intel_crt_detect(
-				struct drm_connector *connector, bool force)
-{
-	if (cdv_intel_crt_detect_hotplug(connector, force))
-		return connector_status_connected;
-	else
-		return connector_status_disconnected;
-}
-
-static void cdv_intel_crt_destroy(struct drm_connector *connector)
-{
-	struct psb_intel_output *intel_output = to_psb_intel_output(connector);
-
-	psb_intel_i2c_destroy(intel_output->ddc_bus);
-	drm_sysfs_connector_remove(connector);
-	drm_connector_cleanup(connector);
-	kfree(connector);
-}
-
-static int cdv_intel_crt_get_modes(struct drm_connector *connector)
-{
-	struct psb_intel_output *intel_output =
-				to_psb_intel_output(connector);
-	return psb_intel_ddc_get_modes(intel_output);
-}
-
-static int cdv_intel_crt_set_property(struct drm_connector *connector,
-				  struct drm_property *property,
-				  uint64_t value)
-{
-	return 0;
-}
-
-/*
- * Routines for controlling stuff on the analog port
- */
-
-static const struct drm_encoder_helper_funcs cdv_intel_crt_helper_funcs = {
-	.dpms = cdv_intel_crt_dpms,
-	.mode_fixup = cdv_intel_crt_mode_fixup,
-	.prepare = psb_intel_encoder_prepare,
-	.commit = psb_intel_encoder_commit,
-	.mode_set = cdv_intel_crt_mode_set,
-};
-
-static const struct drm_connector_funcs cdv_intel_crt_connector_funcs = {
-	.dpms = drm_helper_connector_dpms,
-	.detect = cdv_intel_crt_detect,
-	.fill_modes = drm_helper_probe_single_connector_modes,
-	.destroy = cdv_intel_crt_destroy,
-	.set_property = cdv_intel_crt_set_property,
-};
-
-static const struct drm_connector_helper_funcs
-				cdv_intel_crt_connector_helper_funcs = {
-	.mode_valid = cdv_intel_crt_mode_valid,
-	.get_modes = cdv_intel_crt_get_modes,
-	.best_encoder = psb_intel_best_encoder,
-};
-
-static void cdv_intel_crt_enc_destroy(struct drm_encoder *encoder)
-{
-	drm_encoder_cleanup(encoder);
-}
-
-static const struct drm_encoder_funcs cdv_intel_crt_enc_funcs = {
-	.destroy = cdv_intel_crt_enc_destroy,
-};
-
-void cdv_intel_crt_init(struct drm_device *dev,
-			struct psb_intel_mode_device *mode_dev)
-{
-
-	struct psb_intel_output *psb_intel_output;
-	struct drm_connector *connector;
-	struct drm_encoder *encoder;
-
-	u32 i2c_reg;
-
-	psb_intel_output = kzalloc(sizeof(struct psb_intel_output), GFP_KERNEL);
-	if (!psb_intel_output)
-		return;
-
-	psb_intel_output->mode_dev = mode_dev;
-	connector = &psb_intel_output->base;
-	drm_connector_init(dev, connector,
-		&cdv_intel_crt_connector_funcs, DRM_MODE_CONNECTOR_VGA);
-
-	encoder = &psb_intel_output->enc;
-	drm_encoder_init(dev, encoder,
-		&cdv_intel_crt_enc_funcs, DRM_MODE_ENCODER_DAC);
-
-	drm_mode_connector_attach_encoder(&psb_intel_output->base,
-					  &psb_intel_output->enc);
-
-	/* Set up the DDC bus. */
-	i2c_reg = GPIOA;
-	/* Remove the following code for CDV */
-	/*
-	if (dev_priv->crt_ddc_bus != 0)
-		i2c_reg = dev_priv->crt_ddc_bus;
-	}*/
-	psb_intel_output->ddc_bus = psb_intel_i2c_create(dev,
-						i2c_reg, "CRTDDC_A");
-	if (!psb_intel_output->ddc_bus) {
-		dev_printk(KERN_ERR, &dev->pdev->dev, "DDC bus registration "
-			   "failed.\n");
-		goto failed_ddc;
-	}
-
-	psb_intel_output->type = INTEL_OUTPUT_ANALOG;
-	/*
-	psb_intel_output->clone_mask = (1 << INTEL_ANALOG_CLONE_BIT);
-	psb_intel_output->crtc_mask = (1 << 0) | (1 << 1);
-	*/
-	connector->interlace_allowed = 0;
-	connector->doublescan_allowed = 0;
-
-	drm_encoder_helper_add(encoder, &cdv_intel_crt_helper_funcs);
-	drm_connector_helper_add(connector,
-					&cdv_intel_crt_connector_helper_funcs);
-
-	drm_sysfs_connector_add(connector);
-
-	return;
-failed_ddc:
-	drm_encoder_cleanup(&psb_intel_output->enc);
-	drm_connector_cleanup(&psb_intel_output->base);
-	kfree(psb_intel_output);
-	return;
-}

drivers/staging/gma500/displays/hdmi.h

-/*
- * Copyright (c)  2010 Intel Corporation
- *
- * Permission is hereby granted, free of charge, to any person obtaining a
- * copy of this software and associated documentation files (the "Software"),
- * to deal in the Software without restriction, including without limitation
- * the rights to use, copy, modify, merge, publish, distribute, sublicense,
- * and/or sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice (including the next
- * paragraph) shall be included in all copies or substantial portions of the
- * Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
- * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
- * DEALINGS IN THE SOFTWARE.
- *
- * Authors:
- * Thomas Eaton <thomas.g.eaton@intel.com>
- * Scott Rowe <scott.m.rowe@intel.com>
- */
-
-#ifndef HDMI_H
-#define HDMI_H
-
-extern void hdmi_init(struct drm_device *dev);
-
-#endif

drivers/staging/gma500/displays/pyr_cmd.h

-/*
- * Copyright (c)  2010 Intel Corporation
- *
- * Permission is hereby granted, free of charge, to any person obtaining a
- * copy of this software and associated documentation files (the "Software"),
- * to deal in the Software without restriction, including without limitation
- * the rights to use, copy, modify, merge, publish, distribute, sublicensen
- * and/or sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice (including the next
- * paragraph) shall be included in all copies or substantial portions of the
- * Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
- * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
- * DEALINGS IN THE SOFTWARE.
- *
- * Authors:
- * Thomas Eaton <thomas.g.eaton@intel.com>
- * Scott Rowe <scott.m.rowe@intel.com>
- */
-
-#ifndef PYR_CMD_H
-#define PYR_CMD_H
-
-extern void pyr_cmd_init(struct drm_device *dev, struct panel_funcs *p_funcs);
-
-#endif
-

drivers/staging/gma500/displays/pyr_vid.h

-/*
- * Copyright (c)  2010 Intel Corporation
- *
- * Permission is hereby granted, free of charge, to any person obtaining a
- * copy of this software and associated documentation files (the "Software"),
- * to deal in the Software without restriction, including without limitation
- * the rights to use, copy, modify, merge, publish, distribute, sublicensen
- * and/or sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice (including the next
- * paragraph) shall be included in all copies or substantial portions of the
- * Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
- * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
- * DEALINGS IN THE SOFTWARE.
- *
- * Authors:
- * Thomas Eaton <thomas.g.eaton@intel.com>
- * Scott Rowe <scott.m.rowe@intel.com>
-*/
-
-#ifndef PYR_VID_H
-#define PYR_VID_H
-
-extern void pyr_vid_init(struct drm_device *dev, struct panel_funcs *p_funcs);
-extern struct drm_display_mode *pyr_vid_get_config_mode(struct drm_device* dev);
-
-#endif

drivers/staging/gma500/displays/tmd_cmd.h

-/*
- * Copyright (c)  2010 Intel Corporation
- *
- * Permission is hereby granted, free of charge, to any person obtaining a
- * copy of this software and associated documentation files (the "Software"),
- * to deal in the Software without restriction, including without limitation
- * the rights to use, copy, modify, merge, publish, distribute, sublicensen
- * and/or sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice (including the next
- * paragraph) shall be included in all copies or substantial portions of the
- * Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
- * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
- * DEALINGS IN THE SOFTWARE.
- *
- * Authors:
- * Thomas Eaton <thomas.g.eaton@intel.com>
- * Scott Rowe <scott.m.rowe@intel.com>
- */
-
-#ifndef TMD_CMD_H
-#define TMD_CMD_H
-
-extern void tmd_cmd_init(struct drm_device *dev, struct panel_funcs *p_funcs);
-extern struct drm_display_mode *tmd_cmd_get_config_mode(struct drm_device *dev);
-
-#endif

drivers/staging/gma500/displays/tmd_vid.h

-/*
- * Copyright (c)  2010 Intel Corporation
- *
- * Permission is hereby granted, free of charge, to any person obtaining a
- * copy of this software and associated documentation files (the "Software"),
- * to deal in the Software without restriction, including without limitation
- * the rights to use, copy, modify, merge, publish, distribute, sublicensen
- * and/or sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice (including the next
- * paragraph) shall be included in all copies or substantial portions of the
- * Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
- * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
- * DEALINGS IN THE SOFTWARE.
- *
- * Authors:
- * Thomas Eaton <thomas.g.eaton@intel.com>
- * Scott Rowe <scott.m.rowe@intel.com>
-*/
-
-#ifndef TMD_VID_H
-#define TMD_VID_H
-
-extern void tmd_vid_init(struct drm_device *dev, struct panel_funcs *p_funcs);
-extern struct drm_display_mode *tmd_vid_get_config_mode(struct drm_device *dev);
-
-#endif

drivers/staging/gma500/displays/tpo_cmd.h

-/*
- * Copyright (c)  2010 Intel Corporation
- *
- * Permission is hereby granted, free of charge, to any person obtaining a
- * copy of this software and associated documentation files (the "Software"),
- * to deal in the Software without restriction, including without limitation
- * the rights to use, copy, modify, merge, publish, distribute, sublicensen
- * and/or sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice (including the next
- * paragraph) shall be included in all copies or substantial portions of the
- * Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
- * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
- * DEALINGS IN THE SOFTWARE.
- *
- * Authors:
- * Thomas Eaton <thomas.g.eaton@intel.com>
- * Scott Rowe <scott.m.rowe@intel.com>
-*/
-
-#ifndef TPO_CMD_H
-#define TPO_CMD_H
-
-extern void tpo_cmd_init(struct drm_device *dev, struct panel_funcs *p_funcs);
-/* extern struct drm_display_mode * */
-/* tpo_cmd_get_config_mode(struct drm_device *dev); */
-
-#endif

drivers/staging/gma500/gem_glue.h

-extern void drm_gem_object_release_wrap(struct drm_gem_object *obj);
-extern int gem_create_mmap_offset(struct drm_gem_object *obj);

drivers/staging/omapdrm/Makefile

@@ -7,6 +7,7 @@ ccflags-y := -Iinclude/drm -Werror
 omapdrm-y := omap_drv.o \
 	omap_debugfs.o \
 	omap_crtc.o \
+	omap_plane.o \
 	omap_encoder.o \
 	omap_connector.o \
 	omap_fb.o \

drivers/staging/pohmelfs/Makefile

-obj-$(CONFIG_POHMELFS)	+= pohmelfs.o
-
-pohmelfs-y := inode.o config.o dir.o net.o path_entry.o trans.o crypto.o lock.o mcache.o