V4L/DVB (12413): radio-si470x: separate common and usb code

This patch is a preceding work to add the i2c interface of si470x.
The si470x directory includes a common file and usb specific file and
header file.
The part unrelated with usb interface and i2c interface exists in
radio-si470x-common.c file, and The usb specific part exists in
radio-si470x-usb.c file.
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
[tobias.lorenz@gmx.net: Small changes, due to new include "linux/smp_lock.h"]
Signed-off-by: Tobias Lorenz <tobias.lorenz@gmx.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

drivers/media/radio/Kconfig

@@ -351,29 +351,11 @@ config USB_DSBR
 	  To compile this driver as a module, choose M here: the
 	  module will be called dsbr100.
 
-config USB_SI470X
-	tristate "Silicon Labs Si470x FM Radio Receiver support"
-	depends on USB && VIDEO_V4L2
-	---help---
-	  This is a driver for USB devices with the Silicon Labs SI470x
-	  chip. Currently these devices are known to work:
-	  - 10c4:818a: Silicon Labs USB FM Radio Reference Design
-	  - 06e1:a155: ADS/Tech FM Radio Receiver (formerly Instant FM Music)
-	  - 1b80:d700: KWorld USB FM Radio SnapMusic Mobile 700 (FM700)
-
-	  Sound is provided by the ALSA USB Audio/MIDI driver. Therefore
-	  if you don't want to use the device solely for RDS receiving,
-	  it is recommended to also select SND_USB_AUDIO.
-
-	  Please have a look at the documentation, especially on how
-	  to redirect the audio stream from the radio to your sound device:
-	  Documentation/video4linux/si470x.txt
-
-	  Say Y here if you want to connect this type of radio to your
-	  computer's USB port.
+config RADIO_SI470X
+	bool "Silicon Labs Si470x FM Radio Receiver support"
+	depends on VIDEO_V4L2
 
-	  To compile this driver as a module, choose M here: the
-	  module will be called radio-si470x.
+source "drivers/media/radio/si470x/Kconfig"
 
 config USB_MR800
 	tristate "AverMedia MR 800 USB FM radio support"

drivers/media/radio/Makefile

@@ -17,7 +17,7 @@ obj-$(CONFIG_RADIO_GEMTEK_PCI) += radio-gemtek-pci.o
 obj-$(CONFIG_RADIO_TRUST) += radio-trust.o
 obj-$(CONFIG_RADIO_MAESTRO) += radio-maestro.o
 obj-$(CONFIG_USB_DSBR) += dsbr100.o
-obj-$(CONFIG_USB_SI470X) += radio-si470x.o
+obj-$(CONFIG_RADIO_SI470X) += si470x/
 obj-$(CONFIG_USB_MR800) += radio-mr800.o
 obj-$(CONFIG_RADIO_TEA5764) += radio-tea5764.o
 

drivers/media/radio/si470x/Kconfig

+config USB_SI470X
+	tristate "Silicon Labs Si470x FM Radio Receiver support with USB"
+	depends on USB && RADIO_SI470X
+	---help---
+	  This is a driver for USB devices with the Silicon Labs SI470x
+	  chip. Currently these devices are known to work:
+	  - 10c4:818a: Silicon Labs USB FM Radio Reference Design
+	  - 06e1:a155: ADS/Tech FM Radio Receiver (formerly Instant FM Music)
+	  - 1b80:d700: KWorld USB FM Radio SnapMusic Mobile 700 (FM700)
+	  - 10c5:819a: Sanei Electric FM USB Radio (aka DealExtreme.com PCear)
+
+	  Sound is provided by the ALSA USB Audio/MIDI driver. Therefore
+	  if you don't want to use the device solely for RDS receiving,
+	  it is recommended to also select SND_USB_AUDIO.
+
+	  Please have a look at the documentation, especially on how
+	  to redirect the audio stream from the radio to your sound device:
+	  Documentation/video4linux/si470x.txt
+
+	  Say Y here if you want to connect this type of radio to your
+	  computer's USB port.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called radio-usb-si470x.

drivers/media/radio/si470x/Makefile

+#
+# Makefile for radios with Silicon Labs Si470x FM Radio Receivers
+#
+
+radio-usb-si470x-objs	:= radio-si470x-usb.o radio-si470x-common.o
+
+obj-$(CONFIG_USB_SI470X) += radio-usb-si470x.o

drivers/media/radio/si470x/radio-si470x.h

+/*
+ *  drivers/media/radio/si470x/radio-si470x.h
+ *
+ *  Driver for radios with Silicon Labs Si470x FM Radio Receivers
+ *
+ *  Copyright (c) 2009 Tobias Lorenz <tobias.lorenz@gmx.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+
+/* driver definitions */
+#define DRIVER_NAME "radio-si470x"
+
+
+/* kernel includes */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/smp_lock.h>
+#include <linux/input.h>
+#include <linux/version.h>
+#include <linux/videodev2.h>
+#include <linux/mutex.h>
+#include <media/v4l2-common.h>
+#include <media/v4l2-ioctl.h>
+#include <media/rds.h>
+#include <asm/unaligned.h>
+
+
+/**************************************************************************
+ * Register Definitions
+ **************************************************************************/
+#define RADIO_REGISTER_SIZE	2	/* 16 register bit width */
+#define RADIO_REGISTER_NUM	16	/* DEVICEID   ... RDSD */
+#define RDS_REGISTER_NUM	6	/* STATUSRSSI ... RDSD */
+
+#define DEVICEID		0	/* Device ID */
+#define DEVICEID_PN		0xf000	/* bits 15..12: Part Number */
+#define DEVICEID_MFGID		0x0fff	/* bits 11..00: Manufacturer ID */
+
+#define CHIPID			1	/* Chip ID */
+#define CHIPID_REV		0xfc00	/* bits 15..10: Chip Version */
+#define CHIPID_DEV		0x0200	/* bits 09..09: Device */
+#define CHIPID_FIRMWARE		0x01ff	/* bits 08..00: Firmware Version */
+
+#define POWERCFG		2	/* Power Configuration */
+#define POWERCFG_DSMUTE		0x8000	/* bits 15..15: Softmute Disable */
+#define POWERCFG_DMUTE		0x4000	/* bits 14..14: Mute Disable */
+#define POWERCFG_MONO		0x2000	/* bits 13..13: Mono Select */
+#define POWERCFG_RDSM		0x0800	/* bits 11..11: RDS Mode (Si4701 only) */
+#define POWERCFG_SKMODE		0x0400	/* bits 10..10: Seek Mode */
+#define POWERCFG_SEEKUP		0x0200	/* bits 09..09: Seek Direction */
+#define POWERCFG_SEEK		0x0100	/* bits 08..08: Seek */
+#define POWERCFG_DISABLE	0x0040	/* bits 06..06: Powerup Disable */
+#define POWERCFG_ENABLE		0x0001	/* bits 00..00: Powerup Enable */
+
+#define CHANNEL			3	/* Channel */
+#define CHANNEL_TUNE		0x8000	/* bits 15..15: Tune */
+#define CHANNEL_CHAN		0x03ff	/* bits 09..00: Channel Select */
+
+#define SYSCONFIG1		4	/* System Configuration 1 */
+#define SYSCONFIG1_RDSIEN	0x8000	/* bits 15..15: RDS Interrupt Enable (Si4701 only) */
+#define SYSCONFIG1_STCIEN	0x4000	/* bits 14..14: Seek/Tune Complete Interrupt Enable */
+#define SYSCONFIG1_RDS		0x1000	/* bits 12..12: RDS Enable (Si4701 only) */
+#define SYSCONFIG1_DE		0x0800	/* bits 11..11: De-emphasis (0=75us 1=50us) */
+#define SYSCONFIG1_AGCD		0x0400	/* bits 10..10: AGC Disable */
+#define SYSCONFIG1_BLNDADJ	0x00c0	/* bits 07..06: Stereo/Mono Blend Level Adjustment */
+#define SYSCONFIG1_GPIO3	0x0030	/* bits 05..04: General Purpose I/O 3 */
+#define SYSCONFIG1_GPIO2	0x000c	/* bits 03..02: General Purpose I/O 2 */
+#define SYSCONFIG1_GPIO1	0x0003	/* bits 01..00: General Purpose I/O 1 */
+
+#define SYSCONFIG2		5	/* System Configuration 2 */
+#define SYSCONFIG2_SEEKTH	0xff00	/* bits 15..08: RSSI Seek Threshold */
+#define SYSCONFIG2_BAND		0x0080	/* bits 07..06: Band Select */
+#define SYSCONFIG2_SPACE	0x0030	/* bits 05..04: Channel Spacing */
+#define SYSCONFIG2_VOLUME	0x000f	/* bits 03..00: Volume */
+
+#define SYSCONFIG3		6	/* System Configuration 3 */
+#define SYSCONFIG3_SMUTER	0xc000	/* bits 15..14: Softmute Attack/Recover Rate */
+#define SYSCONFIG3_SMUTEA	0x3000	/* bits 13..12: Softmute Attenuation */
+#define SYSCONFIG3_SKSNR	0x00f0	/* bits 07..04: Seek SNR Threshold */
+#define SYSCONFIG3_SKCNT	0x000f	/* bits 03..00: Seek FM Impulse Detection Threshold */
+
+#define TEST1			7	/* Test 1 */
+#define TEST1_AHIZEN		0x4000	/* bits 14..14: Audio High-Z Enable */
+
+#define TEST2			8	/* Test 2 */
+/* TEST2 only contains reserved bits */
+
+#define BOOTCONFIG		9	/* Boot Configuration */
+/* BOOTCONFIG only contains reserved bits */
+
+#define STATUSRSSI		10	/* Status RSSI */
+#define STATUSRSSI_RDSR		0x8000	/* bits 15..15: RDS Ready (Si4701 only) */
+#define STATUSRSSI_STC		0x4000	/* bits 14..14: Seek/Tune Complete */
+#define STATUSRSSI_SF		0x2000	/* bits 13..13: Seek Fail/Band Limit */
+#define STATUSRSSI_AFCRL	0x1000	/* bits 12..12: AFC Rail */
+#define STATUSRSSI_RDSS		0x0800	/* bits 11..11: RDS Synchronized (Si4701 only) */
+#define STATUSRSSI_BLERA	0x0600	/* bits 10..09: RDS Block A Errors (Si4701 only) */
+#define STATUSRSSI_ST		0x0100	/* bits 08..08: Stereo Indicator */
+#define STATUSRSSI_RSSI		0x00ff	/* bits 07..00: RSSI (Received Signal Strength Indicator) */
+
+#define READCHAN		11	/* Read Channel */
+#define READCHAN_BLERB		0xc000	/* bits 15..14: RDS Block D Errors (Si4701 only) */
+#define READCHAN_BLERC		0x3000	/* bits 13..12: RDS Block C Errors (Si4701 only) */
+#define READCHAN_BLERD		0x0c00	/* bits 11..10: RDS Block B Errors (Si4701 only) */
+#define READCHAN_READCHAN	0x03ff	/* bits 09..00: Read Channel */
+
+#define RDSA			12	/* RDSA */
+#define RDSA_RDSA		0xffff	/* bits 15..00: RDS Block A Data (Si4701 only) */
+
+#define RDSB			13	/* RDSB */
+#define RDSB_RDSB		0xffff	/* bits 15..00: RDS Block B Data (Si4701 only) */
+
+#define RDSC			14	/* RDSC */
+#define RDSC_RDSC		0xffff	/* bits 15..00: RDS Block C Data (Si4701 only) */
+
+#define RDSD			15	/* RDSD */
+#define RDSD_RDSD		0xffff	/* bits 15..00: RDS Block D Data (Si4701 only) */
+
+
+/**************************************************************************
+ * General Driver Definitions
+ **************************************************************************/
+
+/*
+ * si470x_device - private data
+ */
+struct si470x_device {
+	struct video_device *videodev;
+
+	/* reference to USB and video device */
+	struct usb_device *usbdev;
+	struct usb_interface *intf;
+
+	/* Interrupt endpoint handling */
+	char *int_in_buffer;
+	struct usb_endpoint_descriptor *int_in_endpoint;
+	struct urb *int_in_urb;
+	int int_in_running;
+
+	/* scratch page */
+	unsigned char software_version;
+	unsigned char hardware_version;
+
+	/* driver management */
+	unsigned char disconnected;
+	struct mutex disconnect_lock;
+	unsigned int users;
+
+	/* Silabs internal registers (0..15) */
+	unsigned short registers[RADIO_REGISTER_NUM];
+
+	/* RDS receive buffer */
+	wait_queue_head_t read_queue;
+	struct mutex lock;		/* buffer locking */
+	unsigned char *buffer;		/* size is always multiple of three */
+	unsigned int buf_size;
+	unsigned int rd_index;
+	unsigned int wr_index;
+};
+
+
+/*
+ * The frequency is set in units of 62.5 Hz when using V4L2_TUNER_CAP_LOW,
+ * 62.5 kHz otherwise.
+ * The tuner is able to have a channel spacing of 50, 100 or 200 kHz.
+ * tuner->capability is therefore set to V4L2_TUNER_CAP_LOW
+ * The FREQ_MUL is then: 1 MHz / 62.5 Hz = 16000
+ */
+#define FREQ_MUL (1000000 / 62.5)
+
+
+
+/**************************************************************************
+ * Common Functions
+ **************************************************************************/
+extern const struct v4l2_file_operations si470x_fops;
+extern struct video_device si470x_viddev_template;
+int si470x_get_register(struct si470x_device *radio, int regnr);
+int si470x_set_register(struct si470x_device *radio, int regnr);
+int si470x_set_freq(struct si470x_device *radio, unsigned int freq);
+int si470x_start(struct si470x_device *radio);
+int si470x_stop(struct si470x_device *radio);
+int si470x_rds_on(struct si470x_device *radio);
+int si470x_vidioc_querycap(struct file *file, void *priv,
+		struct v4l2_capability *capability);