Merge tag 'rtc-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux

Pull RTC updates from Alexandre Belloni:
  "Subsystem:
   - non-modular drivers are now explicitly non-modular

  New driver:
    - Epson Toyocom rtc-7301sf/dg

  Drivers:
   - cmos: reject unsupported alarm values wrt the RTC capabilities
   - ds1307: ACPI support
   - jz4740: DT support, jz4780 handling, can now be used as a system
     power controller
   - mcp795: many fixes, in particular proper month handling
   - twl: driver is now DT only"

* tag 'rtc-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (31 commits)
  rtc: mcp795: Fix whitespace and indentation.
  rtc: mcp795: Prefer using the BIT() macro.
  rtc: mcp795: fix month write resetting date to 1.
  rtc: mcp795: fix time range difference between linux and RTC chip.
  rtc: mcp795: fix bitmask value for leap year (LP).
  rtc: mcp795: use bcd2bin/bin2bcd.
  rtc: add support for EPSON TOYOCOM RTC-7301SF/DG
  rtc: ds1307: Add ACPI support
  rtc: imxdi: (trivial) fix a typo
  rtc: ds1374: Merge conditional + WARN_ON()
  rtc: twl: make driver DT only
  rtc: twl: kill static variables
  rtc: fix typos in Kconfig
  rtc: jz4740: make the driver builtin only
  rtc: jz4740: remove unused EXPORT_SYMBOL
  Documentation: bindings: fix twl-rtc documentation
  rtc: Enable compile testing for Maxim and Samsung drivers
  MIPS: jz4740: Remove obsolete code
  MIPS: qi_lb60: Probe RTC driver from DT and use it as power controller
  MIPS: jz4740: DTS: Probe the jz4740-rtc driver from devicetree
  ...

Documentation/ABI/testing/sysfs-class-rtc-rtc0-device-rtc_calibration

-What:           Attribute for calibrating ST-Ericsson AB8500 Real Time Clock
+What:           /sys/class/rtc/rtc0/device/rtc_calibration
 Date:           Oct 2011
 KernelVersion:  3.0
 Contact:        Mark Godfrey <mark.godfrey@stericsson.com>
-Description:    The rtc_calibration attribute allows the userspace to
+Description:    Attribute for calibrating ST-Ericsson AB8500 Real Time Clock
+		The rtc_calibration attribute allows the userspace to
                 calibrate the AB8500.s 32KHz Real Time Clock.
                 Every 60 seconds the AB8500 will correct the RTC's value
                 by adding to it the value of this attribute.

Documentation/devicetree/bindings/rtc/epson,rtc7301.txt

+EPSON TOYOCOM RTC-7301SF/DG
+
+Required properties:
+
+- compatible: Should be "epson,rtc7301sf" or "epson,rtc7301dg"
+- reg: Specifies base physical address and size of the registers.
+- interrupts: A single interrupt specifier.
+
+Example:
+
+rtc: rtc@44a00000 {
+	compatible = "epson,rtc7301dg";
+	reg = <0x44a00000 0x10000>;
+	interrupt-parent = <&axi_intc_0>;
+	interrupts = <3 2>;
+};

Documentation/devicetree/bindings/rtc/ingenic,jz4740-rtc.txt

+JZ4740 and similar SoCs real-time clock driver
+
+Required properties:
+
+- compatible: One of:
+  - "ingenic,jz4740-rtc" - for use with the JZ4740 SoC
+  - "ingenic,jz4780-rtc" - for use with the JZ4780 SoC
+- reg: Address range of rtc register set
+- interrupts: IRQ number for the alarm interrupt
+- clocks: phandle to the "rtc" clock
+- clock-names: must be "rtc"
+
+Optional properties:
+- system-power-controller: To use this component as the
+  system power controller
+- reset-pin-assert-time-ms: Reset pin low-level assertion
+  time after wakeup (default 60ms; range 0-125ms if RTC clock
+  at 32 kHz)
+- min-wakeup-pin-assert-time-ms: Minimum wakeup pin assertion
+  time (default 100ms; range 0-2s if RTC clock at 32 kHz)
+
+Example:
+
+rtc@10003000 {
+	compatible = "ingenic,jz4740-rtc";
+	reg = <0x10003000 0x40>;
+
+	interrupt-parent = <&intc>;
+	interrupts = <32>;
+
+	clocks = <&rtc_clock>;
+	clock-names = "rtc";
+
+	system-power-controller;
+	reset-pin-assert-time-ms = <60>;
+	min-wakeup-pin-assert-time-ms = <100>;
+};

Documentation/devicetree/bindings/rtc/twl-rtc.txt

-* TI twl RTC
-
-The TWL family (twl4030/6030) contains a RTC.
+* Texas Instruments TWL4030/6030 RTC
 
 Required properties:
-- compatible : Should be twl4030-rtc
-
-Examples:
+- compatible : Should be "ti,twl4030-rtc"
+- interrupts : Should be the interrupt number.
 
-rtc@0 {
+Example:
+	rtc {
 		compatible = "ti,twl4030-rtc";
-};
+		interrupts = <11>;
+	};

arch/mips/boot/dts/ingenic/jz4740.dtsi

@@ -44,6 +44,17 @@ cgu: jz4740-cgu@10000000 {
 		#clock-cells = <1>;
 	};
 
+	rtc_dev: rtc@10003000 {
+		compatible = "ingenic,jz4740-rtc";
+		reg = <0x10003000 0x40>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <15>;
+
+		clocks = <&cgu JZ4740_CLK_RTC>;
+		clock-names = "rtc";
+	};
+
 	uart0: serial@10030000 {
 		compatible = "ingenic,jz4740-uart";
 		reg = <0x10030000 0x100>;

arch/mips/boot/dts/ingenic/qi_lb60.dts

@@ -13,3 +13,7 @@ chosen {
 &ext {
 	clock-frequency = <12000000>;
 };
+
+&rtc_dev {
+	system-power-controller;
+};

arch/mips/include/asm/mach-jz4740/platform.h

@@ -22,7 +22,6 @@
 extern struct platform_device jz4740_udc_device;
 extern struct platform_device jz4740_udc_xceiv_device;
 extern struct platform_device jz4740_mmc_device;
-extern struct platform_device jz4740_rtc_device;
 extern struct platform_device jz4740_i2c_device;
 extern struct platform_device jz4740_nand_device;
 extern struct platform_device jz4740_framebuffer_device;

arch/mips/jz4740/board-qi_lb60.c

@@ -438,7 +438,6 @@ static struct platform_device *jz_platform_devices[] __initdata = {
 	&jz4740_pcm_device,
 	&jz4740_i2s_device,
 	&jz4740_codec_device,
-	&jz4740_rtc_device,
 	&jz4740_adc_device,
 	&jz4740_pwm_device,
 	&jz4740_dma_device,

arch/mips/jz4740/platform.c

@@ -88,27 +88,6 @@ struct platform_device jz4740_mmc_device = {
 	.resource	= jz4740_mmc_resources,
 };
 
-/* RTC controller */
-static struct resource jz4740_rtc_resources[] = {
-	{
-		.start	= JZ4740_RTC_BASE_ADDR,
-		.end	= JZ4740_RTC_BASE_ADDR + 0x38 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= JZ4740_IRQ_RTC,
-		.end	= JZ4740_IRQ_RTC,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device jz4740_rtc_device = {
-	.name		= "jz4740-rtc",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(jz4740_rtc_resources),
-	.resource	= jz4740_rtc_resources,
-};
-
 /* I2C controller */
 static struct resource jz4740_i2c_resources[] = {
 	{

arch/mips/jz4740/reset.c

@@ -57,71 +57,8 @@ static void jz4740_restart(char *command)
 	jz4740_halt();
 }
 
-#define JZ_REG_RTC_CTRL			0x00
-#define JZ_REG_RTC_HIBERNATE		0x20
-#define JZ_REG_RTC_WAKEUP_FILTER	0x24
-#define JZ_REG_RTC_RESET_COUNTER	0x28
-
-#define JZ_RTC_CTRL_WRDY		BIT(7)
-#define JZ_RTC_WAKEUP_FILTER_MASK	0x0000FFE0
-#define JZ_RTC_RESET_COUNTER_MASK	0x00000FE0
-
-static inline void jz4740_rtc_wait_ready(void __iomem *rtc_base)
-{
-	uint32_t ctrl;
-
-	do {
-		ctrl = readl(rtc_base + JZ_REG_RTC_CTRL);
-	} while (!(ctrl & JZ_RTC_CTRL_WRDY));
-}
-
-static void jz4740_power_off(void)
-{
-	void __iomem *rtc_base = ioremap(JZ4740_RTC_BASE_ADDR, 0x38);
-	unsigned long wakeup_filter_ticks;
-	unsigned long reset_counter_ticks;
-	struct clk *rtc_clk;
-	unsigned long rtc_rate;
-
-	rtc_clk = clk_get(NULL, "rtc");
-	if (IS_ERR(rtc_clk))
-		panic("unable to get RTC clock");
-	rtc_rate = clk_get_rate(rtc_clk);
-	clk_put(rtc_clk);
-
-	/*
-	 * Set minimum wakeup pin assertion time: 100 ms.
-	 * Range is 0 to 2 sec if RTC is clocked at 32 kHz.
-	 */
-	wakeup_filter_ticks = (100 * rtc_rate) / 1000;
-	if (wakeup_filter_ticks < JZ_RTC_WAKEUP_FILTER_MASK)
-		wakeup_filter_ticks &= JZ_RTC_WAKEUP_FILTER_MASK;
-	else
-		wakeup_filter_ticks = JZ_RTC_WAKEUP_FILTER_MASK;
-	jz4740_rtc_wait_ready(rtc_base);
-	writel(wakeup_filter_ticks, rtc_base + JZ_REG_RTC_WAKEUP_FILTER);
-
-	/*
-	 * Set reset pin low-level assertion time after wakeup: 60 ms.
-	 * Range is 0 to 125 ms if RTC is clocked at 32 kHz.
-	 */
-	reset_counter_ticks = (60 * rtc_rate) / 1000;
-	if (reset_counter_ticks < JZ_RTC_RESET_COUNTER_MASK)
-		reset_counter_ticks &= JZ_RTC_RESET_COUNTER_MASK;
-	else
-		reset_counter_ticks = JZ_RTC_RESET_COUNTER_MASK;
-	jz4740_rtc_wait_ready(rtc_base);
-	writel(reset_counter_ticks, rtc_base + JZ_REG_RTC_RESET_COUNTER);
-
-	jz4740_rtc_wait_ready(rtc_base);
-	writel(1, rtc_base + JZ_REG_RTC_HIBERNATE);
-
-	jz4740_halt();
-}
-
 void jz4740_reset_init(void)
 {
 	_machine_restart = jz4740_restart;
 	_machine_halt = jz4740_halt;
-	pm_power_off = jz4740_power_off;
 }

drivers/rtc/Kconfig

@@ -303,7 +303,7 @@ config RTC_DRV_MAX6900
 
 config RTC_DRV_MAX8907
 	tristate "Maxim MAX8907"
-	depends on MFD_MAX8907
+	depends on MFD_MAX8907 || COMPILE_TEST
 	help
 	  If you say yes here you will get support for the
 	  RTC of Maxim MAX8907 PMIC.
@@ -343,7 +343,7 @@ config RTC_DRV_MAX8997
 
 config RTC_DRV_MAX77686
 	tristate "Maxim MAX77686"
-	depends on MFD_MAX77686 || MFD_MAX77620
+	depends on MFD_MAX77686 || MFD_MAX77620 || COMPILE_TEST
 	help
 	  If you say yes here you will get support for the
 	  RTC of Maxim MAX77686/MAX77620/MAX77802 PMIC.
@@ -481,6 +481,7 @@ config RTC_DRV_TWL92330
 config RTC_DRV_TWL4030
 	tristate "TI TWL4030/TWL5030/TWL6030/TPS659x0"
 	depends on TWL4030_CORE
+	depends on OF
 	help
 	  If you say yes here you get support for the RTC on the
 	  TWL4030/TWL5030/TWL6030 family chips, used mostly with OMAP3 platforms.
@@ -602,7 +603,8 @@ config RTC_DRV_RV8803
 
 config RTC_DRV_S5M
 	tristate "Samsung S2M/S5M series"
-	depends on MFD_SEC_CORE
+	depends on MFD_SEC_CORE || COMPILE_TEST
+	select REGMAP_IRQ
 	help
 	  If you say yes here you will get support for the
 	  RTC of Samsung S2MPS14 and S5M PMIC series.
@@ -820,8 +822,8 @@ config RTC_DRV_RV3029_HWMON
 
 comment "Platform RTC drivers"
 
-# this 'CMOS' RTC driver is arch dependent because <asm-generic/rtc.h>
-# requires <asm/mc146818rtc.h> defining CMOS_READ/CMOS_WRITE, and a
+# this 'CMOS' RTC driver is arch dependent because it requires
+# <asm/mc146818rtc.h> defining CMOS_READ/CMOS_WRITE, and a
 # global rtc_lock ... it's not yet just another platform_device.
 
 config RTC_DRV_CMOS
@@ -1549,14 +1551,11 @@ config RTC_DRV_MPC5121
 	  will be called rtc-mpc5121.
 
 config RTC_DRV_JZ4740
-	tristate "Ingenic JZ4740 SoC"
-	depends on MACH_JZ4740 || COMPILE_TEST
+	bool "Ingenic JZ4740 SoC"
+	depends on MACH_INGENIC || COMPILE_TEST
 	help
-	  If you say yes here you get support for the Ingenic JZ4740 SoC RTC
-	  controller.
-
-	  This driver can also be buillt as a module. If so, the module
-	  will be called rtc-jz4740.
+	  If you say yes here you get support for the Ingenic JZ47xx SoCs RTC
+	  controllers.
 
 config RTC_DRV_LPC24XX
 	tristate "NXP RTC for LPC178x/18xx/408x/43xx"
@@ -1567,7 +1566,7 @@ config RTC_DRV_LPC24XX
 	  NXP LPC178x/18xx/408x/43xx devices.
 
 	  If you have one of the devices above enable this driver to use
-	  the hardware RTC. This driver can also be buillt as a module. If
+	  the hardware RTC. This driver can also be built as a module. If
 	  so, the module will be called rtc-lpc24xx.
 
 config RTC_DRV_LPC32XX
@@ -1576,7 +1575,7 @@ config RTC_DRV_LPC32XX
 	help
 	  This enables support for the NXP RTC in the LPC32XX
 
-	  This driver can also be buillt as a module. If so, the module
+	  This driver can also be built as a module. If so, the module
 	  will be called rtc-lpc32xx.
 
 config RTC_DRV_PM8XXX
@@ -1706,6 +1705,17 @@ config RTC_DRV_PIC32
 	   This driver can also be built as a module. If so, the module
 	   will be called rtc-pic32
 
+config RTC_DRV_R7301
+	tristate "EPSON TOYOCOM RTC-7301SF/DG"
+	select REGMAP_MMIO
+	depends on OF && HAS_IOMEM
+	help
+	   If you say yes here you get support for the EPSON TOYOCOM
+	   RTC-7301SF/DG chips.
+
+	   This driver can also be built as a module. If so, the module
+	   will be called rtc-r7301.
+
 comment "HID Sensor RTC drivers"
 
 config RTC_DRV_HID_SENSOR_TIME

drivers/rtc/Makefile

@@ -120,6 +120,7 @@ obj-$(CONFIG_RTC_DRV_PM8XXX)	+= rtc-pm8xxx.o
 obj-$(CONFIG_RTC_DRV_PS3)	+= rtc-ps3.o
 obj-$(CONFIG_RTC_DRV_PUV3)	+= rtc-puv3.o
 obj-$(CONFIG_RTC_DRV_PXA)	+= rtc-pxa.o
+obj-$(CONFIG_RTC_DRV_R7301)	+= rtc-r7301.o
 obj-$(CONFIG_RTC_DRV_R9701)	+= rtc-r9701.o
 obj-$(CONFIG_RTC_DRV_RC5T583)	+= rtc-rc5t583.o
 obj-$(CONFIG_RTC_DRV_RK808)	+= rtc-rk808.o

drivers/rtc/rtc-cmos.c

@@ -332,14 +332,86 @@ static void cmos_irq_disable(struct cmos_rtc *cmos, unsigned char mask)
 	cmos_checkintr(cmos, rtc_control);
 }
 
+static int cmos_validate_alarm(struct device *dev, struct rtc_wkalrm *t)
+{
+	struct cmos_rtc *cmos = dev_get_drvdata(dev);
+	struct rtc_time now;
+
+	cmos_read_time(dev, &now);
+
+	if (!cmos->day_alrm) {
+		time64_t t_max_date;
+		time64_t t_alrm;
+
+		t_max_date = rtc_tm_to_time64(&now);
+		t_max_date += 24 * 60 * 60 - 1;
+		t_alrm = rtc_tm_to_time64(&t->time);
+		if (t_alrm > t_max_date) {
+			dev_err(dev,
+				"Alarms can be up to one day in the future\n");
+			return -EINVAL;
+		}
+	} else if (!cmos->mon_alrm) {
+		struct rtc_time max_date = now;
+		time64_t t_max_date;
+		time64_t t_alrm;
+		int max_mday;
+
+		if (max_date.tm_mon == 11) {
+			max_date.tm_mon = 0;
+			max_date.tm_year += 1;
+		} else {
+			max_date.tm_mon += 1;
+		}
+		max_mday = rtc_month_days(max_date.tm_mon, max_date.tm_year);
+		if (max_date.tm_mday > max_mday)
+			max_date.tm_mday = max_mday;
+
+		t_max_date = rtc_tm_to_time64(&max_date);
+		t_max_date -= 1;
+		t_alrm = rtc_tm_to_time64(&t->time);
+		if (t_alrm > t_max_date) {
+			dev_err(dev,
+				"Alarms can be up to one month in the future\n");
+			return -EINVAL;
+		}
+	} else {
+		struct rtc_time max_date = now;
+		time64_t t_max_date;
+		time64_t t_alrm;
+		int max_mday;
+
+		max_date.tm_year += 1;
+		max_mday = rtc_month_days(max_date.tm_mon, max_date.tm_year);
+		if (max_date.tm_mday > max_mday)
+			max_date.tm_mday = max_mday;
+
+		t_max_date = rtc_tm_to_time64(&max_date);
+		t_max_date -= 1;
+		t_alrm = rtc_tm_to_time64(&t->time);
+		if (t_alrm > t_max_date) {
+			dev_err(dev,
+				"Alarms can be up to one year in the future\n");
+			return -EINVAL;
+		}
+	}
+
+	return 0;
+}
+
 static int cmos_set_alarm(struct device *dev, struct rtc_wkalrm *t)
 {
 	struct cmos_rtc	*cmos = dev_get_drvdata(dev);
 	unsigned char mon, mday, hrs, min, sec, rtc_control;
+	int ret;
 
 	if (!is_valid_irq(cmos->irq))
 		return -EIO;
 
+	ret = cmos_validate_alarm(dev, t);
+	if (ret < 0)
+		return ret;
+
 	mon = t->time.tm_mon + 1;
 	mday = t->time.tm_mday;
 	hrs = t->time.tm_hour;
@@ -707,9 +779,6 @@ cmos_do_probe(struct device *dev, struct resource *ports, int rtc_irq)
 
 	spin_unlock_irq(&rtc_lock);
 
-	/* FIXME:
-	 * <asm-generic/rtc.h> doesn't know 12-hour mode either.
-	 */
 	if (is_valid_irq(rtc_irq) && !(rtc_control & RTC_24H)) {
 		dev_warn(dev, "only 24-hr supported\n");
 		retval = -ENXIO;

drivers/rtc/rtc-ds1307.c

@@ -11,6 +11,7 @@
  * published by the Free Software Foundation.
  */
 
+#include <linux/acpi.h>
 #include <linux/bcd.h>
 #include <linux/i2c.h>
 #include <linux/init.h>
@@ -191,6 +192,26 @@ static const struct i2c_device_id ds1307_id[] = {
 };
 MODULE_DEVICE_TABLE(i2c, ds1307_id);
 
+#ifdef CONFIG_ACPI
+static const struct acpi_device_id ds1307_acpi_ids[] = {
+	{ .id = "DS1307", .driver_data = ds_1307 },
+	{ .id = "DS1337", .driver_data = ds_1337 },
+	{ .id = "DS1338", .driver_data = ds_1338 },
+	{ .id = "DS1339", .driver_data = ds_1339 },
+	{ .id = "DS1388", .driver_data = ds_1388 },
+	{ .id = "DS1340", .driver_data = ds_1340 },
+	{ .id = "DS3231", .driver_data = ds_3231 },
+	{ .id = "M41T00", .driver_data = m41t00 },
+	{ .id = "MCP7940X", .driver_data = mcp794xx },
+	{ .id = "MCP7941X", .driver_data = mcp794xx },
+	{ .id = "PT7C4338", .driver_data = ds_1307 },
+	{ .id = "RX8025", .driver_data = rx_8025 },
+	{ .id = "ISL12057", .driver_data = ds_1337 },
+	{ }
+};
+MODULE_DEVICE_TABLE(acpi, ds1307_acpi_ids);
+#endif
+
 /*----------------------------------------------------------------------*/
 
 #define BLOCK_DATA_MAX_TRIES 10
@@ -874,7 +895,7 @@ static u8 do_trickle_setup_ds1339(struct i2c_client *client,
 	return setup;
 }
 
-static void ds1307_trickle_of_init(struct i2c_client *client,
+static void ds1307_trickle_init(struct i2c_client *client,
 				struct chip_desc *chip)
 {
 	uint32_t ohms = 0;
@@ -882,9 +903,9 @@ static void ds1307_trickle_of_init(struct i2c_client *client,
 
 	if (!chip->do_trickle_setup)
 		goto out;
-	if (of_property_read_u32(client->dev.of_node, "trickle-resistor-ohms" , &ohms))
+	if (device_property_read_u32(&client->dev, "trickle-resistor-ohms", &ohms))
 		goto out;
-	if (of_property_read_bool(client->dev.of_node, "trickle-diode-disable"))
+	if (device_property_read_bool(&client->dev, "trickle-diode-disable"))
 		diode = false;
 	chip->trickle_charger_setup = chip->do_trickle_setup(client,
 							     ohms, diode);
@@ -1268,7 +1289,7 @@ static int ds1307_probe(struct i2c_client *client,
 	struct ds1307		*ds1307;
 	int			err = -ENODEV;
 	int			tmp, wday;
-	struct chip_desc	*chip = &chips[id->driver_data];
+	struct chip_desc	*chip;
 	struct i2c_adapter	*adapter = to_i2c_adapter(client->dev.parent);
 	bool			want_irq = false;
 	bool			ds1307_can_wakeup_device = false;
@@ -1297,11 +1318,23 @@ static int ds1307_probe(struct i2c_client *client,
 	i2c_set_clientdata(client, ds1307);
 
 	ds1307->client	= client;
+	if (id) {
+		chip = &chips[id->driver_data];
 		ds1307->type = id->driver_data;
+	} else {
+		const struct acpi_device_id *acpi_id;
+
+		acpi_id = acpi_match_device(ACPI_PTR(ds1307_acpi_ids),
+					    &client->dev);
+		if (!acpi_id)
+			return -ENODEV;
+		chip = &chips[acpi_id->driver_data];
+		ds1307->type = acpi_id->driver_data;
+	}
 
-	if (!pdata && client->dev.of_node)
-		ds1307_trickle_of_init(client, chip);
-	else if (pdata && pdata->trickle_charger_setup)
+	if (!pdata)
+		ds1307_trickle_init(client, chip);
+	else if (pdata->trickle_charger_setup)
 		chip->trickle_charger_setup = pdata->trickle_charger_setup;
 
 	if (chip->trickle_charger_setup && chip->trickle_charger_reg) {
@@ -1678,6 +1711,7 @@ static int ds1307_remove(struct i2c_client *client)
 static struct i2c_driver ds1307_driver = {
 	.driver = {
 		.name	= "rtc-ds1307",
+		.acpi_match_table = ACPI_PTR(ds1307_acpi_ids),
 	},
 	.probe		= ds1307_probe,
 	.remove		= ds1307_remove,

drivers/rtc/rtc-ds1374.c

@@ -89,10 +89,8 @@ static int ds1374_read_rtc(struct i2c_client *client, u32 *time,
 	int ret;
 	int i;
 
-	if (nbytes > 4) {
-		WARN_ON(1);
+	if (WARN_ON(nbytes > 4))
 		return -EINVAL;
-	}
 
 	ret = i2c_smbus_read_i2c_block_data(client, reg, nbytes, buf);
 

drivers/rtc/rtc-imxdi.c

@@ -67,7 +67,7 @@
 #define DSR_ETAD  (1 << 21)      /* External tamper A detected */
 #define DSR_EBD   (1 << 20)      /* External boot detected */
 #define DSR_SAD   (1 << 19)      /* SCC alarm detected */
-#define DSR_TTD   (1 << 18)      /* Temperatur tamper detected */
+#define DSR_TTD   (1 << 18)      /* Temperature tamper detected */
 #define DSR_CTD   (1 << 17)      /* Clock tamper detected */
 #define DSR_VTD   (1 << 16)      /* Voltage tamper detected */
 #define DSR_WBF   (1 << 10)      /* Write Busy Flag (synchronous) */

drivers/rtc/rtc-jz4740.c

@@ -14,10 +14,12 @@
  *
  */
 
+#include <linux/clk.h>
 #include <linux/io.h>
 #include <linux/kernel.h>
-#include <linux/module.h>
+#include <linux/of_device.h>
 #include <linux/platform_device.h>
+#include <linux/reboot.h>
 #include <linux/rtc.h>
 #include <linux/slab.h>
 #include <linux/spinlock.h>
@@ -27,8 +29,14 @@
 #define JZ_REG_RTC_SEC_ALARM	0x08
 #define JZ_REG_RTC_REGULATOR	0x0C
 #define JZ_REG_RTC_HIBERNATE	0x20
+#define JZ_REG_RTC_WAKEUP_FILTER	0x24
+#define JZ_REG_RTC_RESET_COUNTER	0x28
 #define JZ_REG_RTC_SCRATCHPAD	0x34
 
+/* The following are present on the jz4780 */
+#define JZ_REG_RTC_WENR	0x3C
+#define JZ_RTC_WENR_WEN	BIT(31)
+
 #define JZ_RTC_CTRL_WRDY	BIT(7)
 #define JZ_RTC_CTRL_1HZ		BIT(6)
 #define JZ_RTC_CTRL_1HZ_IRQ	BIT(5)
@@ -37,16 +45,34 @@
 #define JZ_RTC_CTRL_AE		BIT(2)
 #define JZ_RTC_CTRL_ENABLE	BIT(0)
 
+/* Magic value to enable writes on jz4780 */
+#define JZ_RTC_WENR_MAGIC	0xA55A
+
+#define JZ_RTC_WAKEUP_FILTER_MASK	0x0000FFE0
+#define JZ_RTC_RESET_COUNTER_MASK	0x00000FE0
+
+enum jz4740_rtc_type {
+	ID_JZ4740,
+	ID_JZ4780,
+};
+
 struct jz4740_rtc {
 	void __iomem *base;
+	enum jz4740_rtc_type type;
 
 	struct rtc_device *rtc;
+	struct clk *clk;
 
 	int irq;
 
 	spinlock_t lock;
+
+	unsigned int min_wakeup_pin_assert_time;
+	unsigned int reset_pin_assert_time;
 };
 
+static struct device *dev_for_power_off;
+
 static inline uint32_t jz4740_rtc_reg_read(struct jz4740_rtc *rtc, size_t reg)
 {
 	return readl(rtc->base + reg);
@@ -64,10 +90,32 @@ static int jz4740_rtc_wait_write_ready(struct jz4740_rtc *rtc)
 	return timeout ? 0 : -EIO;
 }
 
+static inline int jz4780_rtc_enable_write(struct jz4740_rtc *rtc)
+{
+	uint32_t ctrl;
+	int ret, timeout = 1000;
+
+	ret = jz4740_rtc_wait_write_ready(rtc);
+	if (ret != 0)
+		return ret;
+
+	writel(JZ_RTC_WENR_MAGIC, rtc->base + JZ_REG_RTC_WENR);
+
+	do {
+		ctrl = readl(rtc->base + JZ_REG_RTC_WENR);
+	} while (!(ctrl & JZ_RTC_WENR_WEN) && --timeout);
+
+	return timeout ? 0 : -EIO;
+}
+
 static inline int jz4740_rtc_reg_write(struct jz4740_rtc *rtc, size_t reg,
 	uint32_t val)
 {
-	int ret;
+	int ret = 0;
+
+	if (rtc->type >= ID_JZ4780)
+		ret = jz4780_rtc_enable_write(rtc);
+	if (ret == 0)
 		ret = jz4740_rtc_wait_write_ready(rtc);
 	if (ret == 0)
 		writel(val, rtc->base + reg);
@@ -203,12 +251,57 @@ static irqreturn_t jz4740_rtc_irq(int irq, void *data)
 	return IRQ_HANDLED;
 }
 
-void jz4740_rtc_poweroff(struct device *dev)
+static void jz4740_rtc_poweroff(struct device *dev)
 {
 	struct jz4740_rtc *rtc = dev_get_drvdata(dev);
 	jz4740_rtc_reg_write(rtc, JZ_REG_RTC_HIBERNATE, 1);
 }
-EXPORT_SYMBOL_GPL(jz4740_rtc_poweroff);
+
+static void jz4740_rtc_power_off(void)
+{
+	struct jz4740_rtc *rtc = dev_get_drvdata(dev_for_power_off);
+	unsigned long rtc_rate;
+	unsigned long wakeup_filter_ticks;
+	unsigned long reset_counter_ticks;
+
+	clk_prepare_enable(rtc->clk);
+
+	rtc_rate = clk_get_rate(rtc->clk);
+
+	/*
+	 * Set minimum wakeup pin assertion time: 100 ms.
+	 * Range is 0 to 2 sec if RTC is clocked at 32 kHz.
+	 */
+	wakeup_filter_ticks =
+		(rtc->min_wakeup_pin_assert_time * rtc_rate) / 1000;
+	if (wakeup_filter_ticks < JZ_RTC_WAKEUP_FILTER_MASK)
+		wakeup_filter_ticks &= JZ_RTC_WAKEUP_FILTER_MASK;
+	else
+		wakeup_filter_ticks = JZ_RTC_WAKEUP_FILTER_MASK;
+	jz4740_rtc_reg_write(rtc,
+			     JZ_REG_RTC_WAKEUP_FILTER, wakeup_filter_ticks);
+
+	/*
+	 * Set reset pin low-level assertion time after wakeup: 60 ms.
+	 * Range is 0 to 125 ms if RTC is clocked at 32 kHz.
+	 */
+	reset_counter_ticks = (rtc->reset_pin_assert_time * rtc_rate) / 1000;
+	if (reset_counter_ticks < JZ_RTC_RESET_COUNTER_MASK)
+		reset_counter_ticks &= JZ_RTC_RESET_COUNTER_MASK;
+	else
+		reset_counter_ticks = JZ_RTC_RESET_COUNTER_MASK;
+	jz4740_rtc_reg_write(rtc,
+			     JZ_REG_RTC_RESET_COUNTER, reset_counter_ticks);
+
+	jz4740_rtc_poweroff(dev_for_power_off);
+	machine_halt();
+}
+
+static const struct of_device_id jz4740_rtc_of_match[] = {
+	{ .compatible = "ingenic,jz4740-rtc", .data = (void *)ID_JZ4740 },
+	{ .compatible = "ingenic,jz4780-rtc", .data = (void *)ID_JZ4780 },
+	{},
+};
 
 static int jz4740_rtc_probe(struct platform_device *pdev)
 {
@@ -216,11 +309,20 @@ static int jz4740_rtc_probe(struct platform_device *pdev)
 	struct jz4740_rtc *rtc;
 	uint32_t scratchpad;
 	struct resource *mem;
+	const struct platform_device_id *id = platform_get_device_id(pdev);
+	const struct of_device_id *of_id = of_match_device(
+			jz4740_rtc_of_match, &pdev->dev);
+	struct device_node *np = pdev->dev.of_node;
 
 	rtc = devm_kzalloc(&pdev->dev, sizeof(*rtc), GFP_KERNEL);
 	if (!rtc)
 		return -ENOMEM;
 
+	if (of_id)
+		rtc->type = (enum jz4740_rtc_type)of_id->data;
+	else
+		rtc->type = id->driver_data;
+
 	rtc->irq = platform_get_irq(pdev, 0);
 	if (rtc->irq < 0) {
 		dev_err(&pdev->dev, "Failed to get platform irq\n");
@@ -232,6 +334,12 @@ static int jz4740_rtc_probe(struct platform_device *pdev)
 	if (IS_ERR(rtc->base))
 		return PTR_ERR(rtc->base);
 
+	rtc->clk = devm_clk_get(&pdev->dev, "rtc");
+	if (IS_ERR(rtc->clk)) {
+		dev_err(&pdev->dev, "Failed to get RTC clock\n");
+		return PTR_ERR(rtc->clk);
+	}
+
 	spin_lock_init(&rtc->lock);
 
 	platform_set_drvdata(pdev, rtc);
@@ -263,6 +371,27 @@ static int jz4740_rtc_probe(struct platform_device *pdev)
 		}
 	}
 
+	if (np && of_device_is_system_power_controller(np)) {
+		if (!pm_power_off) {
+			/* Default: 60ms */
+			rtc->reset_pin_assert_time = 60;
+			of_property_read_u32(np, "reset-pin-assert-time-ms",
+					     &rtc->reset_pin_assert_time);
+
+			/* Default: 100ms */
+			rtc->min_wakeup_pin_assert_time = 100;
+			of_property_read_u32(np,
+					     "min-wakeup-pin-assert-time-ms",
+					     &rtc->min_wakeup_pin_assert_time);
+
+			dev_for_power_off = &pdev->dev;
+			pm_power_off = jz4740_rtc_power_off;
+		} else {
+			dev_warn(&pdev->dev,
+				 "Poweroff handler already present!\n");
+		}
+	}
+
 	return 0;
 }
 
@@ -295,17 +424,20 @@ static const struct dev_pm_ops jz4740_pm_ops = {
 #define JZ4740_RTC_PM_OPS NULL
 #endif  /* CONFIG_PM */
 
+static const struct platform_device_id jz4740_rtc_ids[] = {
+	{ "jz4740-rtc", ID_JZ4740 },
+	{ "jz4780-rtc", ID_JZ4780 },
+	{}
+};
+
 static struct platform_driver jz4740_rtc_driver = {
 	.probe	 = jz4740_rtc_probe,
 	.driver	 = {
 		.name  = "jz4740-rtc",
 		.pm    = JZ4740_RTC_PM_OPS,
+		.of_match_table = of_match_ptr(jz4740_rtc_of_match),
 	},
+	.id_table = jz4740_rtc_ids,
 };
 
-module_platform_driver(jz4740_rtc_driver);
-
-MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>");
-MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("RTC driver for the JZ4740 SoC\n");
-MODULE_ALIAS("platform:jz4740-rtc");
+builtin_platform_driver(jz4740_rtc_driver);

drivers/rtc/rtc-lib.c

@@ -11,7 +11,7 @@
  * published by the Free Software Foundation.
 */
 
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/rtc.h>
 
 static const unsigned char rtc_days_in_month[] = {
@@ -148,5 +148,3 @@ struct rtc_time rtc_ktime_to_tm(ktime_t kt)
 	return ret;
 }
 EXPORT_SYMBOL_GPL(rtc_ktime_to_tm);
-
-MODULE_LICENSE("GPL");

drivers/rtc/rtc-mcp795.c

@@ -12,7 +12,7 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  *
- * */
+ */
 
 #include <linux/module.h>
 #include <linux/kernel.h>
@@ -21,6 +21,8 @@
 #include <linux/spi/spi.h>
 #include <linux/rtc.h>
 #include <linux/of.h>
+#include <linux/bcd.h>
+#include <linux/delay.h>
 
 /* MCP795 Instructions, see datasheet table 3-1 */
 #define MCP795_EEREAD	0x03
@@ -37,8 +39,17 @@
 #define MCP795_CLRWDT	0x44
 #define MCP795_CLRRAM	0x54
 
-#define MCP795_ST_BIT	0x80
-#define MCP795_24_BIT	0x40
+/* MCP795 RTCC registers, see datasheet table 4-1 */
+#define MCP795_REG_SECONDS	0x01
+#define MCP795_REG_DAY		0x04
+#define MCP795_REG_MONTH	0x06
+#define MCP795_REG_CONTROL	0x08
+
+#define MCP795_ST_BIT		BIT(7)
+#define MCP795_24_BIT		BIT(6)
+#define MCP795_LP_BIT		BIT(5)
+#define MCP795_EXTOSC_BIT	BIT(3)
+#define MCP795_OSCON_BIT	BIT(5)
 
 static int mcp795_rtcc_read(struct device *dev, u8 addr, u8 *buf, u8 count)
 {
@@ -93,30 +104,97 @@ static int mcp795_rtcc_set_bits(struct device *dev, u8 addr, u8 mask, u8 state)
 	return ret;
 }
 
+static int mcp795_stop_oscillator(struct device *dev, bool *extosc)
+{
+	int retries = 5;
+	int ret;
+	u8 data;
+
+	ret = mcp795_rtcc_set_bits(dev, MCP795_REG_SECONDS, MCP795_ST_BIT, 0);
+	if (ret)
+		return ret;
+	ret = mcp795_rtcc_read(dev, MCP795_REG_CONTROL, &data, 1);
+	if (ret)
+		return ret;
+	*extosc = !!(data & MCP795_EXTOSC_BIT);
+	ret = mcp795_rtcc_set_bits(
+				dev, MCP795_REG_CONTROL, MCP795_EXTOSC_BIT, 0);
+	if (ret)
+		return ret;
+	/* wait for the OSCON bit to clear */
+	do {
+		usleep_range(700, 800);
+		ret = mcp795_rtcc_read(dev, MCP795_REG_DAY, &data, 1);
+		if (ret)
+			break;
+		if (!(data & MCP795_OSCON_BIT))
+			break;
+
+	} while (--retries);
+
+	return !retries ? -EIO : ret;
+}
+
+static int mcp795_start_oscillator(struct device *dev, bool *extosc)
+{
+	if (extosc) {
+		u8 data = *extosc ? MCP795_EXTOSC_BIT : 0;
+		int ret;
+
+		ret = mcp795_rtcc_set_bits(
+			dev, MCP795_REG_CONTROL, MCP795_EXTOSC_BIT, data);
+		if (ret)
+			return ret;
+	}
+	return mcp795_rtcc_set_bits(
+			dev, MCP795_REG_SECONDS, MCP795_ST_BIT, MCP795_ST_BIT);
+}
+
 static int mcp795_set_time(struct device *dev, struct rtc_time *tim)
 {
 	int ret;
 	u8 data[7];
+	bool extosc;
+
+	/* Stop RTC and store current value of EXTOSC bit */
+	ret = mcp795_stop_oscillator(dev, &extosc);
+	if (ret)
+		return ret;
 
 	/* Read first, so we can leave config bits untouched */
-	ret = mcp795_rtcc_read(dev, 0x01, data, sizeof(data));
+	ret = mcp795_rtcc_read(dev, MCP795_REG_SECONDS, data, sizeof(data));
 
 	if (ret)
 		return ret;
 
-	data[0] = (data[0] & 0x80) | ((tim->tm_sec / 10) << 4) | (tim->tm_sec % 10);
-	data[1] = (data[1] & 0x80) | ((tim->tm_min / 10) << 4) | (tim->tm_min % 10);
-	data[2] = ((tim->tm_hour / 10) << 4) | (tim->tm_hour % 10);
-	data[4] = ((tim->tm_mday / 10) << 4) | ((tim->tm_mday) % 10);
-	data[5] = (data[5] & 0x10) | (tim->tm_mon / 10) | (tim->tm_mon % 10);
+	data[0] = (data[0] & 0x80) | bin2bcd(tim->tm_sec);
+	data[1] = (data[1] & 0x80) | bin2bcd(tim->tm_min);
+	data[2] = bin2bcd(tim->tm_hour);
+	data[4] = bin2bcd(tim->tm_mday);
+	data[5] = (data[5] & MCP795_LP_BIT) | bin2bcd(tim->tm_mon + 1);
 
 	if (tim->tm_year > 100)
 		tim->tm_year -= 100;
 
-	data[6] = ((tim->tm_year / 10) << 4) | (tim->tm_year % 10);
+	data[6] = bin2bcd(tim->tm_year);
 
-	ret = mcp795_rtcc_write(dev, 0x01, data, sizeof(data));
+	/* Always write the date and month using a separate Write command.
+	 * This is a workaround for a know silicon issue that some combinations
+	 * of date and month values may result in the date being reset to 1.
+	 */
+	ret = mcp795_rtcc_write(dev, MCP795_REG_SECONDS, data, 5);
+	if (ret)
+		return ret;
+
+	ret = mcp795_rtcc_write(dev, MCP795_REG_MONTH, &data[5], 2);
+	if (ret)
+		return ret;
 
+	/* Start back RTC and restore previous value of EXTOSC bit.
+	 * There is no need to clear EXTOSC bit when the previous value was 0
+	 * because it was already cleared when stopping the RTC oscillator.
+	 */
+	ret = mcp795_start_oscillator(dev, extosc ? &extosc : NULL);
 	if (ret)
 		return ret;
 
@@ -132,17 +210,17 @@ static int mcp795_read_time(struct device *dev, struct rtc_time *tim)
 	int ret;
 	u8 data[7];
 
-	ret = mcp795_rtcc_read(dev, 0x01, data, sizeof(data));
+	ret = mcp795_rtcc_read(dev, MCP795_REG_SECONDS, data, sizeof(data));
 
 	if (ret)
 		return ret;
 
-	tim->tm_sec		= ((data[0] & 0x70) >> 4) * 10 + (data[0] & 0x0f);
-	tim->tm_min		= ((data[1] & 0x70) >> 4) * 10 + (data[1] & 0x0f);
-	tim->tm_hour	= ((data[2] & 0x30) >> 4) * 10 + (data[2] & 0x0f);
-	tim->tm_mday	= ((data[4] & 0x30) >> 4) * 10 + (data[4] & 0x0f);
-	tim->tm_mon		= ((data[5] & 0x10) >> 4) * 10 + (data[5] & 0x0f);
-	tim->tm_year	= ((data[6] & 0xf0) >> 4) * 10 + (data[6] & 0x0f) + 100; /* Assume we are in 20xx */
+	tim->tm_sec	= bcd2bin(data[0] & 0x7F);
+	tim->tm_min	= bcd2bin(data[1] & 0x7F);
+	tim->tm_hour	= bcd2bin(data[2] & 0x3F);
+	tim->tm_mday	= bcd2bin(data[4] & 0x3F);
+	tim->tm_mon	= bcd2bin(data[5] & 0x1F) - 1;
+	tim->tm_year	= bcd2bin(data[6]) + 100; /* Assume we are in 20xx */
 
 	dev_dbg(dev, "Read from mcp795: %04d-%02d-%02d %02d:%02d:%02d\n",
 				tim->tm_year + 1900, tim->tm_mon, tim->tm_mday,
@@ -169,8 +247,8 @@ static int mcp795_probe(struct spi_device *spi)
 		return ret;
 	}
 
-	/* Start the oscillator */
-	mcp795_rtcc_set_bits(&spi->dev, 0x01, MCP795_ST_BIT, MCP795_ST_BIT);
+	/* Start the oscillator but don't set the value of EXTOSC bit */
+	mcp795_start_oscillator(&spi->dev, NULL);
 	/* Clear the 12 hour mode flag*/
 	mcp795_rtcc_set_bits(&spi->dev, 0x03, MCP795_24_BIT, 0);
 

drivers/rtc/rtc-pcf85063.c

@@ -191,12 +191,19 @@ static int pcf85063_probe(struct i2c_client *client,
 				const struct i2c_device_id *id)
 {
 	struct rtc_device *rtc;
+	int err;
 
 	dev_dbg(&client->dev, "%s\n", __func__);
 
 	if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C))
 		return -ENODEV;
 
+	err = i2c_smbus_read_byte_data(client, PCF85063_REG_CTRL1);
+	if (err < 0) {
+		dev_err(&client->dev, "RTC chip is not present\n");
+		return err;
+	}
+
 	rtc = devm_rtc_device_register(&client->dev,
 				       pcf85063_driver.driver.name,
 				       &pcf85063_rtc_ops, THIS_MODULE);

drivers/rtc/rtc-starfire.c

 /* rtc-starfire.c: Starfire platform RTC driver.
+ *
+ * Author: David S. Miller
+ * License: GPL
  *
  * Copyright (C) 2008 David S. Miller <davem@davemloft.net>
  */
 
 #include <linux/kernel.h>
-#include <linux/module.h>
 #include <linux/init.h>
 #include <linux/rtc.h>
 #include <linux/platform_device.h>
 
 #include <asm/oplib.h>
 
-MODULE_AUTHOR("David S. Miller <davem@davemloft.net>");
-MODULE_DESCRIPTION("Starfire RTC driver");
-MODULE_LICENSE("GPL");
-
 static u32 starfire_get_time(void)
 {
 	static char obp_gettod[32];
@@ -57,4 +55,4 @@ static struct platform_driver starfire_rtc_driver = {
 	},
 };
 
-module_platform_driver_probe(starfire_rtc_driver, starfire_rtc_probe);
+builtin_platform_driver_probe(starfire_rtc_driver, starfire_rtc_probe);

drivers/rtc/rtc-sun4v.c

 /* rtc-sun4v.c: Hypervisor based RTC for SUN4V systems.
+ *
+ * Author: David S. Miller
+ * License: GPL
  *
  * Copyright (C) 2008 David S. Miller <davem@davemloft.net>
  */
@@ -6,7 +9,6 @@
 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
 
 #include <linux/kernel.h>
-#include <linux/module.h>
 #include <linux/delay.h>
 #include <linux/init.h>
 #include <linux/rtc.h>
@@ -98,8 +100,4 @@ static struct platform_driver sun4v_rtc_driver = {
 	},
 };
 
-module_platform_driver_probe(sun4v_rtc_driver, sun4v_rtc_probe);
-
-MODULE_AUTHOR("David S. Miller <davem@davemloft.net>");
-MODULE_DESCRIPTION("SUN4V RTC driver");
-MODULE_LICENSE("GPL");
+builtin_platform_driver_probe(sun4v_rtc_driver, sun4v_rtc_probe);