Commit b11a25aa authored by amit salecha's avatar amit salecha Committed by David S. Miller

qlcnic: change module parameter permissions

o Updating module parameter after driver load is not supported
  except auto_fw_reset parameter. Changing these parameter after
  driver load, can have weird result.

o Update driver version to 5.0.15.
Signed-off-by: default avatarAmit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 13b93ed9
...@@ -34,8 +34,8 @@ ...@@ -34,8 +34,8 @@
#define _QLCNIC_LINUX_MAJOR 5 #define _QLCNIC_LINUX_MAJOR 5
#define _QLCNIC_LINUX_MINOR 0 #define _QLCNIC_LINUX_MINOR 0
#define _QLCNIC_LINUX_SUBVERSION 14 #define _QLCNIC_LINUX_SUBVERSION 15
#define QLCNIC_LINUX_VERSIONID "5.0.14" #define QLCNIC_LINUX_VERSIONID "5.0.15"
#define QLCNIC_DRV_IDC_VER 0x01 #define QLCNIC_DRV_IDC_VER 0x01
#define QLCNIC_DRIVER_VERSION ((_QLCNIC_LINUX_MAJOR << 16) |\ #define QLCNIC_DRIVER_VERSION ((_QLCNIC_LINUX_MAJOR << 16) |\
(_QLCNIC_LINUX_MINOR << 8) | (_QLCNIC_LINUX_SUBVERSION)) (_QLCNIC_LINUX_MINOR << 8) | (_QLCNIC_LINUX_SUBVERSION))
......
...@@ -31,15 +31,15 @@ static const char qlcnic_driver_string[] = "QLogic 1/10 GbE " ...@@ -31,15 +31,15 @@ static const char qlcnic_driver_string[] = "QLogic 1/10 GbE "
static struct workqueue_struct *qlcnic_wq; static struct workqueue_struct *qlcnic_wq;
static int qlcnic_mac_learn; static int qlcnic_mac_learn;
module_param(qlcnic_mac_learn, int, 0644); module_param(qlcnic_mac_learn, int, 0444);
MODULE_PARM_DESC(qlcnic_mac_learn, "Mac Filter (0=disabled, 1=enabled)"); MODULE_PARM_DESC(qlcnic_mac_learn, "Mac Filter (0=disabled, 1=enabled)");
static int use_msi = 1; static int use_msi = 1;
module_param(use_msi, int, 0644); module_param(use_msi, int, 0444);
MODULE_PARM_DESC(use_msi, "MSI interrupt (0=disabled, 1=enabled"); MODULE_PARM_DESC(use_msi, "MSI interrupt (0=disabled, 1=enabled");
static int use_msi_x = 1; static int use_msi_x = 1;
module_param(use_msi_x, int, 0644); module_param(use_msi_x, int, 0444);
MODULE_PARM_DESC(use_msi_x, "MSI-X interrupt (0=disabled, 1=enabled"); MODULE_PARM_DESC(use_msi_x, "MSI-X interrupt (0=disabled, 1=enabled");
static int auto_fw_reset = AUTO_FW_RESET_ENABLED; static int auto_fw_reset = AUTO_FW_RESET_ENABLED;
...@@ -47,11 +47,11 @@ module_param(auto_fw_reset, int, 0644); ...@@ -47,11 +47,11 @@ module_param(auto_fw_reset, int, 0644);
MODULE_PARM_DESC(auto_fw_reset, "Auto firmware reset (0=disabled, 1=enabled"); MODULE_PARM_DESC(auto_fw_reset, "Auto firmware reset (0=disabled, 1=enabled");
static int load_fw_file; static int load_fw_file;
module_param(load_fw_file, int, 0644); module_param(load_fw_file, int, 0444);
MODULE_PARM_DESC(load_fw_file, "Load firmware from (0=flash, 1=file"); MODULE_PARM_DESC(load_fw_file, "Load firmware from (0=flash, 1=file");
static int qlcnic_config_npars; static int qlcnic_config_npars;
module_param(qlcnic_config_npars, int, 0644); module_param(qlcnic_config_npars, int, 0444);
MODULE_PARM_DESC(qlcnic_config_npars, "Configure NPARs (0=disabled, 1=enabled"); MODULE_PARM_DESC(qlcnic_config_npars, "Configure NPARs (0=disabled, 1=enabled");
static int __devinit qlcnic_probe(struct pci_dev *pdev, static int __devinit qlcnic_probe(struct pci_dev *pdev,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment