Commit b11d282d authored by Tomi Valkeinen's avatar Tomi Valkeinen Committed by Mike Turquette

clk: divider: fix rate calculation for fractional rates

clk-divider.c does not calculate the rates consistently at the moment.

As an example, on OMAP3 we have a clock divider with a source clock of
864000000 Hz. With dividers 6, 7 and 8 the theoretical rates are:

6: 144000000
7: 123428571.428571...
8: 108000000

Calling clk_round_rate() with the rate in the first column will give the
rate in the second column:

144000000 -> 144000000
143999999 -> 123428571
123428572 -> 123428571
123428571 -> 108000000

Note how clk_round_rate() returns 123428571 for rates from 123428572 to
143999999, which is mathematically correct, but when clk_round_rate() is
called with 123428571, the returned value is surprisingly 108000000.

This means that the following code works a bit oddly:

rate = clk_round_rate(clk, 123428572);
clk_set_rate(clk, rate);

As clk_set_rate() also does clock rate rounding, the result is that the
clock is set to the rate of 108000000, not 123428571 returned by the
clk_round_rate.

This patch changes the clk-divider.c to use DIV_ROUND_UP when
calculating the rate. This gives the following behavior which fixes the
inconsistency:

144000000 -> 144000000
143999999 -> 123428572
123428572 -> 123428572
123428571 -> 108000000
Signed-off-by: default avatarTomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: default avatarMike Turquette <mturquette@linaro.org>
parent 1887c3a6
...@@ -24,7 +24,7 @@ ...@@ -24,7 +24,7 @@
* Traits of this clock: * Traits of this clock:
* prepare - clk_prepare only ensures that parents are prepared * prepare - clk_prepare only ensures that parents are prepared
* enable - clk_enable only ensures that parents are enabled * enable - clk_enable only ensures that parents are enabled
* rate - rate is adjustable. clk->rate = parent->rate / divisor * rate - rate is adjustable. clk->rate = DIV_ROUND_UP(parent->rate / divisor)
* parent - fixed parent. No clk_set_parent support * parent - fixed parent. No clk_set_parent support
*/ */
...@@ -115,7 +115,7 @@ static unsigned long clk_divider_recalc_rate(struct clk_hw *hw, ...@@ -115,7 +115,7 @@ static unsigned long clk_divider_recalc_rate(struct clk_hw *hw,
return parent_rate; return parent_rate;
} }
return parent_rate / div; return DIV_ROUND_UP(parent_rate, div);
} }
/* /*
...@@ -185,7 +185,7 @@ static int clk_divider_bestdiv(struct clk_hw *hw, unsigned long rate, ...@@ -185,7 +185,7 @@ static int clk_divider_bestdiv(struct clk_hw *hw, unsigned long rate,
} }
parent_rate = __clk_round_rate(__clk_get_parent(hw->clk), parent_rate = __clk_round_rate(__clk_get_parent(hw->clk),
MULT_ROUND_UP(rate, i)); MULT_ROUND_UP(rate, i));
now = parent_rate / i; now = DIV_ROUND_UP(parent_rate, i);
if (now <= rate && now > best) { if (now <= rate && now > best) {
bestdiv = i; bestdiv = i;
best = now; best = now;
...@@ -207,7 +207,7 @@ static long clk_divider_round_rate(struct clk_hw *hw, unsigned long rate, ...@@ -207,7 +207,7 @@ static long clk_divider_round_rate(struct clk_hw *hw, unsigned long rate,
int div; int div;
div = clk_divider_bestdiv(hw, rate, prate); div = clk_divider_bestdiv(hw, rate, prate);
return *prate / div; return DIV_ROUND_UP(*prate, div);
} }
static int clk_divider_set_rate(struct clk_hw *hw, unsigned long rate, static int clk_divider_set_rate(struct clk_hw *hw, unsigned long rate,
...@@ -218,7 +218,7 @@ static int clk_divider_set_rate(struct clk_hw *hw, unsigned long rate, ...@@ -218,7 +218,7 @@ static int clk_divider_set_rate(struct clk_hw *hw, unsigned long rate,
unsigned long flags = 0; unsigned long flags = 0;
u32 val; u32 val;
div = parent_rate / rate; div = DIV_ROUND_UP(parent_rate, rate);
value = _get_val(divider, div); value = _get_val(divider, div);
if (value > div_mask(divider)) if (value > div_mask(divider))
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment