Commit b14f7fb5 authored by Linus Torvalds's avatar Linus Torvalds

Merge git://git.infradead.org/battery-2.6

* git://git.infradead.org/battery-2.6:
  power_supply: Sharp SL-6000 (tosa) batteries support
  power_supply: fix up CHARGE_COUNTER output to be more precise
  power_supply: add CHARGE_COUNTER property and olpc_battery support for it
  power_supply: bump EC version check that we refuse to run with in olpc_battery
  power_supply: cleanup of the OLPC battery driver
  power_supply: add eeprom dump file to olpc_battery's sysfs
  power_supply: Support serial number in olpc_battery
parents 00e9028a 9fec6060
......@@ -101,6 +101,10 @@ of charge when battery became full/empty". It also could mean "value of
charge when battery considered full/empty at given conditions (temperature,
age)". I.e. these attributes represents real thresholds, not design values.
CHARGE_COUNTER - the current charge counter (in µAh). This could easily
be negative; there is no empty or full value. It is only useful for
relative, time-based measurements.
ENERGY_FULL, ENERGY_EMPTY - same as above but for energy.
CAPACITY - capacity in percents.
......
......@@ -49,6 +49,13 @@ config BATTERY_OLPC
help
Say Y to enable support for the battery on the OLPC laptop.
config BATTERY_TOSA
tristate "Sharp SL-6000 (tosa) battery"
depends on MACH_TOSA && MFD_TC6393XB
help
Say Y to enable support for the battery on the Sharp Zaurus
SL-6000 (tosa) models.
config BATTERY_PALMTX
tristate "Palm T|X battery"
depends on MACH_PALMTX
......
......@@ -20,4 +20,5 @@ obj-$(CONFIG_APM_POWER) += apm_power.o
obj-$(CONFIG_BATTERY_DS2760) += ds2760_battery.o
obj-$(CONFIG_BATTERY_PMU) += pmu_battery.o
obj-$(CONFIG_BATTERY_OLPC) += olpc_battery.o
obj-$(CONFIG_BATTERY_TOSA) += tosa_battery.o
obj-$(CONFIG_BATTERY_PALMTX) += palmtx_battery.o
......@@ -19,7 +19,7 @@
#define EC_BAT_VOLTAGE 0x10 /* uint16_t, *9.76/32, mV */
#define EC_BAT_CURRENT 0x11 /* int16_t, *15.625/120, mA */
#define EC_BAT_ACR 0x12
#define EC_BAT_ACR 0x12 /* int16_t, *6250/15, µAh */
#define EC_BAT_TEMP 0x13 /* uint16_t, *100/256, °C */
#define EC_AMB_TEMP 0x14 /* uint16_t, *100/256, °C */
#define EC_BAT_STATUS 0x15 /* uint8_t, bitmask */
......@@ -84,6 +84,119 @@ static struct power_supply olpc_ac = {
.get_property = olpc_ac_get_prop,
};
static char bat_serial[17]; /* Ick */
static int olpc_bat_get_status(union power_supply_propval *val, uint8_t ec_byte)
{
if (olpc_platform_info.ecver > 0x44) {
if (ec_byte & BAT_STAT_CHARGING)
val->intval = POWER_SUPPLY_STATUS_CHARGING;
else if (ec_byte & BAT_STAT_DISCHARGING)
val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
else if (ec_byte & BAT_STAT_FULL)
val->intval = POWER_SUPPLY_STATUS_FULL;
else /* er,... */
val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
} else {
/* Older EC didn't report charge/discharge bits */
if (!(ec_byte & BAT_STAT_AC)) /* No AC means discharging */
val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
else if (ec_byte & BAT_STAT_FULL)
val->intval = POWER_SUPPLY_STATUS_FULL;
else /* Not _necessarily_ true but EC doesn't tell all yet */
val->intval = POWER_SUPPLY_STATUS_CHARGING;
}
return 0;
}
static int olpc_bat_get_health(union power_supply_propval *val)
{
uint8_t ec_byte;
int ret;
ret = olpc_ec_cmd(EC_BAT_ERRCODE, NULL, 0, &ec_byte, 1);
if (ret)
return ret;
switch (ec_byte) {
case 0:
val->intval = POWER_SUPPLY_HEALTH_GOOD;
break;
case BAT_ERR_OVERTEMP:
val->intval = POWER_SUPPLY_HEALTH_OVERHEAT;
break;
case BAT_ERR_OVERVOLTAGE:
val->intval = POWER_SUPPLY_HEALTH_OVERVOLTAGE;
break;
case BAT_ERR_INFOFAIL:
case BAT_ERR_OUT_OF_CONTROL:
case BAT_ERR_ID_FAIL:
case BAT_ERR_ACR_FAIL:
val->intval = POWER_SUPPLY_HEALTH_UNSPEC_FAILURE;
break;
default:
/* Eep. We don't know this failure code */
ret = -EIO;
}
return ret;
}
static int olpc_bat_get_mfr(union power_supply_propval *val)
{
uint8_t ec_byte;
int ret;
ec_byte = BAT_ADDR_MFR_TYPE;
ret = olpc_ec_cmd(EC_BAT_EEPROM, &ec_byte, 1, &ec_byte, 1);
if (ret)
return ret;
switch (ec_byte >> 4) {
case 1:
val->strval = "Gold Peak";
break;
case 2:
val->strval = "BYD";
break;
default:
val->strval = "Unknown";
break;
}
return ret;
}
static int olpc_bat_get_tech(union power_supply_propval *val)
{
uint8_t ec_byte;
int ret;
ec_byte = BAT_ADDR_MFR_TYPE;
ret = olpc_ec_cmd(EC_BAT_EEPROM, &ec_byte, 1, &ec_byte, 1);
if (ret)
return ret;
switch (ec_byte & 0xf) {
case 1:
val->intval = POWER_SUPPLY_TECHNOLOGY_NiMH;
break;
case 2:
val->intval = POWER_SUPPLY_TECHNOLOGY_LiFe;
break;
default:
val->intval = POWER_SUPPLY_TECHNOLOGY_UNKNOWN;
break;
}
return ret;
}
/*********************************************************************
* Battery properties
*********************************************************************/
......@@ -94,6 +207,7 @@ static int olpc_bat_get_property(struct power_supply *psy,
int ret = 0;
int16_t ec_word;
uint8_t ec_byte;
uint64_t ser_buf;
ret = olpc_ec_cmd(EC_BAT_STATUS, NULL, 0, &ec_byte, 1);
if (ret)
......@@ -110,25 +224,10 @@ static int olpc_bat_get_property(struct power_supply *psy,
switch (psp) {
case POWER_SUPPLY_PROP_STATUS:
if (olpc_platform_info.ecver > 0x44) {
if (ec_byte & BAT_STAT_CHARGING)
val->intval = POWER_SUPPLY_STATUS_CHARGING;
else if (ec_byte & BAT_STAT_DISCHARGING)
val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
else if (ec_byte & BAT_STAT_FULL)
val->intval = POWER_SUPPLY_STATUS_FULL;
else /* er,... */
val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
} else {
/* Older EC didn't report charge/discharge bits */
if (!(ec_byte & BAT_STAT_AC)) /* No AC means discharging */
val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
else if (ec_byte & BAT_STAT_FULL)
val->intval = POWER_SUPPLY_STATUS_FULL;
else /* Not _necessarily_ true but EC doesn't tell all yet */
val->intval = POWER_SUPPLY_STATUS_CHARGING;
break;
}
ret = olpc_bat_get_status(val, ec_byte);
if (ret)
return ret;
break;
case POWER_SUPPLY_PROP_PRESENT:
val->intval = !!(ec_byte & BAT_STAT_PRESENT);
break;
......@@ -137,72 +236,21 @@ static int olpc_bat_get_property(struct power_supply *psy,
if (ec_byte & BAT_STAT_DESTROY)
val->intval = POWER_SUPPLY_HEALTH_DEAD;
else {
ret = olpc_ec_cmd(EC_BAT_ERRCODE, NULL, 0, &ec_byte, 1);
ret = olpc_bat_get_health(val);
if (ret)
return ret;
switch (ec_byte) {
case 0:
val->intval = POWER_SUPPLY_HEALTH_GOOD;
break;
case BAT_ERR_OVERTEMP:
val->intval = POWER_SUPPLY_HEALTH_OVERHEAT;
break;
case BAT_ERR_OVERVOLTAGE:
val->intval = POWER_SUPPLY_HEALTH_OVERVOLTAGE;
break;
case BAT_ERR_INFOFAIL:
case BAT_ERR_OUT_OF_CONTROL:
case BAT_ERR_ID_FAIL:
case BAT_ERR_ACR_FAIL:
val->intval = POWER_SUPPLY_HEALTH_UNSPEC_FAILURE;
break;
default:
/* Eep. We don't know this failure code */
return -EIO;
}
}
break;
case POWER_SUPPLY_PROP_MANUFACTURER:
ec_byte = BAT_ADDR_MFR_TYPE;
ret = olpc_ec_cmd(EC_BAT_EEPROM, &ec_byte, 1, &ec_byte, 1);
ret = olpc_bat_get_mfr(val);
if (ret)
return ret;
switch (ec_byte >> 4) {
case 1:
val->strval = "Gold Peak";
break;
case 2:
val->strval = "BYD";
break;
default:
val->strval = "Unknown";
break;
}
break;
case POWER_SUPPLY_PROP_TECHNOLOGY:
ec_byte = BAT_ADDR_MFR_TYPE;
ret = olpc_ec_cmd(EC_BAT_EEPROM, &ec_byte, 1, &ec_byte, 1);
ret = olpc_bat_get_tech(val);
if (ret)
return ret;
switch (ec_byte & 0xf) {
case 1:
val->intval = POWER_SUPPLY_TECHNOLOGY_NiMH;
break;
case 2:
val->intval = POWER_SUPPLY_TECHNOLOGY_LiFe;
break;
default:
val->intval = POWER_SUPPLY_TECHNOLOGY_UNKNOWN;
break;
}
break;
case POWER_SUPPLY_PROP_VOLTAGE_AVG:
ret = olpc_ec_cmd(EC_BAT_VOLTAGE, NULL, 0, (void *)&ec_word, 2);
......@@ -241,6 +289,22 @@ static int olpc_bat_get_property(struct power_supply *psy,
ec_word = be16_to_cpu(ec_word);
val->intval = ec_word * 100 / 256;
break;
case POWER_SUPPLY_PROP_CHARGE_COUNTER:
ret = olpc_ec_cmd(EC_BAT_ACR, NULL, 0, (void *)&ec_word, 2);
if (ret)
return ret;
ec_word = be16_to_cpu(ec_word);
val->intval = ec_word * 6250 / 15;
break;
case POWER_SUPPLY_PROP_SERIAL_NUMBER:
ret = olpc_ec_cmd(EC_BAT_SERIAL, NULL, 0, (void *)&ser_buf, 8);
if (ret)
return ret;
sprintf(bat_serial, "%016llx", (long long)be64_to_cpu(ser_buf));
val->strval = bat_serial;
break;
default:
ret = -EINVAL;
break;
......@@ -260,6 +324,50 @@ static enum power_supply_property olpc_bat_props[] = {
POWER_SUPPLY_PROP_TEMP,
POWER_SUPPLY_PROP_TEMP_AMBIENT,
POWER_SUPPLY_PROP_MANUFACTURER,
POWER_SUPPLY_PROP_SERIAL_NUMBER,
POWER_SUPPLY_PROP_CHARGE_COUNTER,
};
/* EEPROM reading goes completely around the power_supply API, sadly */
#define EEPROM_START 0x20
#define EEPROM_END 0x80
#define EEPROM_SIZE (EEPROM_END - EEPROM_START)
static ssize_t olpc_bat_eeprom_read(struct kobject *kobj,
struct bin_attribute *attr, char *buf, loff_t off, size_t count)
{
uint8_t ec_byte;
int ret, end;
if (off >= EEPROM_SIZE)
return 0;
if (off + count > EEPROM_SIZE)
count = EEPROM_SIZE - off;
end = EEPROM_START + off + count;
for (ec_byte = EEPROM_START + off; ec_byte < end; ec_byte++) {
ret = olpc_ec_cmd(EC_BAT_EEPROM, &ec_byte, 1,
&buf[ec_byte - EEPROM_START], 1);
if (ret) {
printk(KERN_ERR "olpc-battery: EC command "
"EC_BAT_EEPROM @ 0x%x failed -"
" %d!\n", ec_byte, ret);
return -EIO;
}
}
return count;
}
static struct bin_attribute olpc_bat_eeprom = {
.attr = {
.name = "eeprom",
.mode = S_IRUGO,
.owner = THIS_MODULE,
},
.size = 0,
.read = olpc_bat_eeprom_read,
};
/*********************************************************************
......@@ -290,8 +398,14 @@ static int __init olpc_bat_init(void)
if (!olpc_platform_info.ecver)
return -ENXIO;
if (olpc_platform_info.ecver < 0x43) {
printk(KERN_NOTICE "OLPC EC version 0x%02x too old for battery driver.\n", olpc_platform_info.ecver);
/*
* We've seen a number of EC protocol changes; this driver requires
* the latest EC protocol, supported by 0x44 and above.
*/
if (olpc_platform_info.ecver < 0x44) {
printk(KERN_NOTICE "OLPC EC version 0x%02x too old for "
"battery driver.\n", olpc_platform_info.ecver);
return -ENXIO;
}
......@@ -315,8 +429,14 @@ static int __init olpc_bat_init(void)
if (ret)
goto battery_failed;
ret = device_create_bin_file(olpc_bat.dev, &olpc_bat_eeprom);
if (ret)
goto eeprom_failed;
goto success;
eeprom_failed:
power_supply_unregister(&olpc_bat);
battery_failed:
power_supply_unregister(&olpc_ac);
ac_failed:
......@@ -327,6 +447,7 @@ static int __init olpc_bat_init(void)
static void __exit olpc_bat_exit(void)
{
device_remove_bin_file(olpc_bat.dev, &olpc_bat_eeprom);
power_supply_unregister(&olpc_bat);
power_supply_unregister(&olpc_ac);
platform_device_unregister(bat_pdev);
......
......@@ -99,6 +99,7 @@ static struct device_attribute power_supply_attrs[] = {
POWER_SUPPLY_ATTR(charge_empty),
POWER_SUPPLY_ATTR(charge_now),
POWER_SUPPLY_ATTR(charge_avg),
POWER_SUPPLY_ATTR(charge_counter),
POWER_SUPPLY_ATTR(energy_full_design),
POWER_SUPPLY_ATTR(energy_empty_design),
POWER_SUPPLY_ATTR(energy_full),
......
/*
* Battery and Power Management code for the Sharp SL-6000x
*
* Copyright (c) 2005 Dirk Opfer
* Copyright (c) 2008 Dmitry Baryshkov
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/power_supply.h>
#include <linux/wm97xx.h>
#include <linux/delay.h>
#include <linux/spinlock.h>
#include <linux/interrupt.h>
#include <linux/gpio.h>
#include <asm/mach-types.h>
#include <asm/arch/tosa.h>
static DEFINE_MUTEX(bat_lock); /* protects gpio pins */
static struct work_struct bat_work;
struct tosa_bat {
int status;
struct power_supply psy;
int full_chrg;
struct mutex work_lock; /* protects data */
bool (*is_present)(struct tosa_bat *bat);
int gpio_full;
int gpio_charge_off;
int technology;
int gpio_bat;
int adc_bat;
int adc_bat_divider;
int bat_max;
int bat_min;
int gpio_temp;
int adc_temp;
int adc_temp_divider;
};
static struct tosa_bat tosa_bat_main;
static struct tosa_bat tosa_bat_jacket;
static unsigned long tosa_read_bat(struct tosa_bat *bat)
{
unsigned long value = 0;
if (bat->gpio_bat < 0 || bat->adc_bat < 0)
return 0;
mutex_lock(&bat_lock);
gpio_set_value(bat->gpio_bat, 1);
msleep(5);
value = wm97xx_read_aux_adc(bat->psy.dev->parent->driver_data,
bat->adc_bat);
gpio_set_value(bat->gpio_bat, 0);
mutex_unlock(&bat_lock);
value = value * 1000000 / bat->adc_bat_divider;
return value;
}
static unsigned long tosa_read_temp(struct tosa_bat *bat)
{
unsigned long value = 0;
if (bat->gpio_temp < 0 || bat->adc_temp < 0)
return 0;
mutex_lock(&bat_lock);
gpio_set_value(bat->gpio_temp, 1);
msleep(5);
value = wm97xx_read_aux_adc(bat->psy.dev->parent->driver_data,
bat->adc_temp);
gpio_set_value(bat->gpio_temp, 0);
mutex_unlock(&bat_lock);
value = value * 10000 / bat->adc_temp_divider;
return value;
}
static int tosa_bat_get_property(struct power_supply *psy,
enum power_supply_property psp,
union power_supply_propval *val)
{
int ret = 0;
struct tosa_bat *bat = container_of(psy, struct tosa_bat, psy);
if (bat->is_present && !bat->is_present(bat)
&& psp != POWER_SUPPLY_PROP_PRESENT) {
return -ENODEV;
}
switch (psp) {
case POWER_SUPPLY_PROP_STATUS:
val->intval = bat->status;
break;
case POWER_SUPPLY_PROP_TECHNOLOGY:
val->intval = bat->technology;
break;
case POWER_SUPPLY_PROP_VOLTAGE_NOW:
val->intval = tosa_read_bat(bat);
break;
case POWER_SUPPLY_PROP_VOLTAGE_MAX:
if (bat->full_chrg == -1)
val->intval = bat->bat_max;
else
val->intval = bat->full_chrg;
break;
case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN:
val->intval = bat->bat_max;
break;
case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN:
val->intval = bat->bat_min;
break;
case POWER_SUPPLY_PROP_TEMP:
val->intval = tosa_read_temp(bat);
break;
case POWER_SUPPLY_PROP_PRESENT:
val->intval = bat->is_present ? bat->is_present(bat) : 1;
break;
default:
ret = -EINVAL;
break;
}
return ret;
}
static bool tosa_jacket_bat_is_present(struct tosa_bat *bat)
{
return gpio_get_value(TOSA_GPIO_JACKET_DETECT) == 0;
}
static void tosa_bat_external_power_changed(struct power_supply *psy)
{
schedule_work(&bat_work);
}
static irqreturn_t tosa_bat_gpio_isr(int irq, void *data)
{
pr_info("tosa_bat_gpio irq: %d\n", gpio_get_value(irq_to_gpio(irq)));
schedule_work(&bat_work);
return IRQ_HANDLED;
}
static void tosa_bat_update(struct tosa_bat *bat)
{
int old;
struct power_supply *psy = &bat->psy;
mutex_lock(&bat->work_lock);
old = bat->status;
if (bat->is_present && !bat->is_present(bat)) {
printk(KERN_NOTICE "%s not present\n", psy->name);
bat->status = POWER_SUPPLY_STATUS_UNKNOWN;
bat->full_chrg = -1;
} else if (power_supply_am_i_supplied(psy)) {
if (bat->status == POWER_SUPPLY_STATUS_DISCHARGING) {
gpio_set_value(bat->gpio_charge_off, 0);
mdelay(15);
}
if (gpio_get_value(bat->gpio_full)) {
if (old == POWER_SUPPLY_STATUS_CHARGING ||
bat->full_chrg == -1)
bat->full_chrg = tosa_read_bat(bat);
gpio_set_value(bat->gpio_charge_off, 1);
bat->status = POWER_SUPPLY_STATUS_FULL;
} else {
gpio_set_value(bat->gpio_charge_off, 0);
bat->status = POWER_SUPPLY_STATUS_CHARGING;
}
} else {
gpio_set_value(bat->gpio_charge_off, 1);
bat->status = POWER_SUPPLY_STATUS_DISCHARGING;
}
if (old != bat->status)
power_supply_changed(psy);
mutex_unlock(&bat->work_lock);
}
static void tosa_bat_work(struct work_struct *work)
{
tosa_bat_update(&tosa_bat_main);
tosa_bat_update(&tosa_bat_jacket);
}
static enum power_supply_property tosa_bat_main_props[] = {
POWER_SUPPLY_PROP_STATUS,
POWER_SUPPLY_PROP_TECHNOLOGY,
POWER_SUPPLY_PROP_VOLTAGE_NOW,
POWER_SUPPLY_PROP_VOLTAGE_MAX,
POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN,
POWER_SUPPLY_PROP_TEMP,
POWER_SUPPLY_PROP_PRESENT,
};
static enum power_supply_property tosa_bat_bu_props[] = {
POWER_SUPPLY_PROP_STATUS,
POWER_SUPPLY_PROP_TECHNOLOGY,
POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN,
POWER_SUPPLY_PROP_VOLTAGE_NOW,
POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN,
POWER_SUPPLY_PROP_PRESENT,
};
static struct tosa_bat tosa_bat_main = {
.status = POWER_SUPPLY_STATUS_DISCHARGING,
.full_chrg = -1,
.psy = {
.name = "main-battery",
.type = POWER_SUPPLY_TYPE_BATTERY,
.properties = tosa_bat_main_props,
.num_properties = ARRAY_SIZE(tosa_bat_main_props),
.get_property = tosa_bat_get_property,
.external_power_changed = tosa_bat_external_power_changed,
.use_for_apm = 1,
},
.gpio_full = TOSA_GPIO_BAT0_CRG,
.gpio_charge_off = TOSA_GPIO_CHARGE_OFF,
.technology = POWER_SUPPLY_TECHNOLOGY_LIPO,
.gpio_bat = TOSA_GPIO_BAT0_V_ON,
.adc_bat = WM97XX_AUX_ID3,
.adc_bat_divider = 414,
.bat_max = 4310000,
.bat_min = 1551 * 1000000 / 414,
.gpio_temp = TOSA_GPIO_BAT1_TH_ON,
.adc_temp = WM97XX_AUX_ID2,
.adc_temp_divider = 10000,
};
static struct tosa_bat tosa_bat_jacket = {
.status = POWER_SUPPLY_STATUS_DISCHARGING,
.full_chrg = -1,
.psy = {
.name = "jacket-battery",
.type = POWER_SUPPLY_TYPE_BATTERY,
.properties = tosa_bat_main_props,
.num_properties = ARRAY_SIZE(tosa_bat_main_props),
.get_property = tosa_bat_get_property,
.external_power_changed = tosa_bat_external_power_changed,
},
.is_present = tosa_jacket_bat_is_present,
.gpio_full = TOSA_GPIO_BAT1_CRG,
.gpio_charge_off = TOSA_GPIO_CHARGE_OFF_JC,
.technology = POWER_SUPPLY_TECHNOLOGY_LIPO,
.gpio_bat = TOSA_GPIO_BAT1_V_ON,
.adc_bat = WM97XX_AUX_ID3,
.adc_bat_divider = 414,
.bat_max = 4310000,
.bat_min = 1551 * 1000000 / 414,
.gpio_temp = TOSA_GPIO_BAT0_TH_ON,
.adc_temp = WM97XX_AUX_ID2,
.adc_temp_divider = 10000,
};
static struct tosa_bat tosa_bat_bu = {
.status = POWER_SUPPLY_STATUS_UNKNOWN,
.full_chrg = -1,
.psy = {
.name = "backup-battery",
.type = POWER_SUPPLY_TYPE_BATTERY,
.properties = tosa_bat_bu_props,
.num_properties = ARRAY_SIZE(tosa_bat_bu_props),
.get_property = tosa_bat_get_property,
.external_power_changed = tosa_bat_external_power_changed,
},
.gpio_full = -1,
.gpio_charge_off = -1,
.technology = POWER_SUPPLY_TECHNOLOGY_LiMn,
.gpio_bat = TOSA_GPIO_BU_CHRG_ON,
.adc_bat = WM97XX_AUX_ID4,
.adc_bat_divider = 1266,
.gpio_temp = -1,
.adc_temp = -1,
.adc_temp_divider = -1,
};
static struct {
int gpio;
char *name;
bool output;
int value;
} gpios[] = {
{ TOSA_GPIO_CHARGE_OFF, "main charge off", 1, 1 },
{ TOSA_GPIO_CHARGE_OFF_JC, "jacket charge off", 1, 1 },
{ TOSA_GPIO_BAT_SW_ON, "battery switch", 1, 0 },
{ TOSA_GPIO_BAT0_V_ON, "main battery", 1, 0 },
{ TOSA_GPIO_BAT1_V_ON, "jacket battery", 1, 0 },
{ TOSA_GPIO_BAT1_TH_ON, "main battery temp", 1, 0 },
{ TOSA_GPIO_BAT0_TH_ON, "jacket battery temp", 1, 0 },
{ TOSA_GPIO_BU_CHRG_ON, "backup battery", 1, 0 },
{ TOSA_GPIO_BAT0_CRG, "main battery full", 0, 0 },
{ TOSA_GPIO_BAT1_CRG, "jacket battery full", 0, 0 },
{ TOSA_GPIO_BAT0_LOW, "main battery low", 0, 0 },
{ TOSA_GPIO_BAT1_LOW, "jacket battery low", 0, 0 },
{ TOSA_GPIO_JACKET_DETECT, "jacket detect", 0, 0 },
};
#ifdef CONFIG_PM
static int tosa_bat_suspend(struct platform_device *dev, pm_message_t state)
{
/* flush all pending status updates */
flush_scheduled_work();
return 0;
}
static int tosa_bat_resume(struct platform_device *dev)
{
/* things may have changed while we were away */
schedule_work(&bat_work);
return 0;
}
#else
#define tosa_bat_suspend NULL
#define tosa_bat_resume NULL
#endif
static int __devinit tosa_bat_probe(struct platform_device *dev)
{
int ret;
int i;
if (!machine_is_tosa())
return -ENODEV;
for (i = 0; i < ARRAY_SIZE(gpios); i++) {
ret = gpio_request(gpios[i].gpio, gpios[i].name);
if (ret) {
i--;
goto err_gpio;
}
if (gpios[i].output)
ret = gpio_direction_output(gpios[i].gpio,
gpios[i].value);
else
ret = gpio_direction_input(gpios[i].gpio);
if (ret)
goto err_gpio;
}
mutex_init(&tosa_bat_main.work_lock);
mutex_init(&tosa_bat_jacket.work_lock);
INIT_WORK(&bat_work, tosa_bat_work);
ret = power_supply_register(&dev->dev, &tosa_bat_main.psy);
if (ret)
goto err_psy_reg_main;
ret = power_supply_register(&dev->dev, &tosa_bat_jacket.psy);
if (ret)
goto err_psy_reg_jacket;
ret = power_supply_register(&dev->dev, &tosa_bat_bu.psy);
if (ret)
goto err_psy_reg_bu;
ret = request_irq(gpio_to_irq(TOSA_GPIO_BAT0_CRG),
tosa_bat_gpio_isr,
IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
"main full", &tosa_bat_main);
if (ret)
goto err_req_main;
ret = request_irq(gpio_to_irq(TOSA_GPIO_BAT1_CRG),
tosa_bat_gpio_isr,
IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
"jacket full", &tosa_bat_jacket);
if (ret)
goto err_req_jacket;
ret = request_irq(gpio_to_irq(TOSA_GPIO_JACKET_DETECT),
tosa_bat_gpio_isr,
IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
"jacket detect", &tosa_bat_jacket);
if (!ret) {
schedule_work(&bat_work);
return 0;
}
free_irq(gpio_to_irq(TOSA_GPIO_BAT1_CRG), &tosa_bat_jacket);
err_req_jacket:
free_irq(gpio_to_irq(TOSA_GPIO_BAT0_CRG), &tosa_bat_main);
err_req_main:
power_supply_unregister(&tosa_bat_bu.psy);
err_psy_reg_bu:
power_supply_unregister(&tosa_bat_jacket.psy);
err_psy_reg_jacket:
power_supply_unregister(&tosa_bat_main.psy);
err_psy_reg_main:
/* see comment in tosa_bat_remove */
flush_scheduled_work();
i--;
err_gpio:
for (; i >= 0; i--)
gpio_free(gpios[i].gpio);
return ret;
}
static int __devexit tosa_bat_remove(struct platform_device *dev)
{
int i;
free_irq(gpio_to_irq(TOSA_GPIO_JACKET_DETECT), &tosa_bat_jacket);
free_irq(gpio_to_irq(TOSA_GPIO_BAT1_CRG), &tosa_bat_jacket);
free_irq(gpio_to_irq(TOSA_GPIO_BAT0_CRG), &tosa_bat_main);
power_supply_unregister(&tosa_bat_bu.psy);
power_supply_unregister(&tosa_bat_jacket.psy);
power_supply_unregister(&tosa_bat_main.psy);
/*
* now flush all pending work.
* we won't get any more schedules, since all
* sources (isr and external_power_changed)
* are unregistered now.
*/
flush_scheduled_work();
for (i = ARRAY_SIZE(gpios) - 1; i >= 0; i--)
gpio_free(gpios[i].gpio);
return 0;
}
static struct platform_driver tosa_bat_driver = {
.driver.name = "wm97xx-battery",
.driver.owner = THIS_MODULE,
.probe = tosa_bat_probe,
.remove = __devexit_p(tosa_bat_remove),
.suspend = tosa_bat_suspend,
.resume = tosa_bat_resume,
};
static int __init tosa_bat_init(void)
{
return platform_driver_register(&tosa_bat_driver);
}
static void __exit tosa_bat_exit(void)
{
platform_driver_unregister(&tosa_bat_driver);
}
module_init(tosa_bat_init);
module_exit(tosa_bat_exit);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Dmitry Baryshkov");
MODULE_DESCRIPTION("Tosa battery driver");
MODULE_ALIAS("platform:wm97xx-battery");
......@@ -78,6 +78,7 @@ enum power_supply_property {
POWER_SUPPLY_PROP_CHARGE_EMPTY,
POWER_SUPPLY_PROP_CHARGE_NOW,
POWER_SUPPLY_PROP_CHARGE_AVG,
POWER_SUPPLY_PROP_CHARGE_COUNTER,
POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN,
POWER_SUPPLY_PROP_ENERGY_EMPTY_DESIGN,
POWER_SUPPLY_PROP_ENERGY_FULL,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment