ARM: dts: r7s72100: add soc node

Add soc node to represent the bus and move all nodes with a base address
into this node. This is consistent with handling of R-Car Gen3 and Gen2
SoCs in mainline. It is intended to migrate other Renesas ARM-based
SoCs to this scheme.

The ordering is derived from simply moving each node with an address up to
before any nodes without a base address that occur before the soc node.  To
improve maintainability follow-up patches will sort subnodes of both the
new soc node and the root node.

This patch should not introduce any functional change.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>

arch/arm/boot/dts/r7s72100.dtsi

@@ -15,7 +15,6 @@
 
 / {
 	compatible = "renesas,r7s72100";
-	interrupt-parent = <&gic>;
 	#address-cells = <1>;
 	#size-cells = <1>;
 
@@ -87,6 +86,29 @@ p0_clk: p0 {
 			clock-mult = <1>;
 			clock-div = <12>;
 		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0>;
+			clock-frequency = <400000000>;
+			clocks = <&cpg_clocks R7S72100_CLK_I>;
+			next-level-cache = <&L2>;
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
 
 		/* Special CPG clocks */
 		cpg_clocks: cpg_clocks@fcfe0000 {
@@ -192,21 +214,6 @@ R7S72100_CLK_SDHI10 R7S72100_CLK_SDHI11
 			>;
 			clock-output-names = "sdhi00", "sdhi01", "sdhi10", "sdhi11";
 		};
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <0>;
-			clock-frequency = <400000000>;
-			clocks = <&cpg_clocks R7S72100_CLK_I>;
-			next-level-cache = <&L2>;
-		};
-	};
 
 		pinctrl: pin-controller@fcfe3000 {
 			compatible = "renesas,r7s72100-ports";
@@ -687,4 +694,5 @@ usbhs1: usb@e8207000 {
 			power-domains = <&cpg_clocks>;
 			status = "disabled";
 		};
+	};
 };