Merge tag 'hwmon-for-linus-v4.19-rc1' of...

Merge tag 'hwmon-for-linus-v4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull hwmon updates from Guenter Roeck:

 - new driver for NPCM7xx PWM and Fan controller

 - new driver for Mellanox FAN controller

 - add support for MAX34451 to max34440 driver

 - add support for new Threadripper variants to k10temp driver

 - add error handling to adt7475 driver

 - cleanup nct6775 and nct7904 drivers

 - document sensor enable ABI attributes

* tag 'hwmon-for-linus-v4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hwmon: (adt7475) Change show functions to return error data correctly
  hwmon: (adt7475) Change update functions to add error handling
  hwmon: (adt7475) Change valid parameter to bool type
  hwmon: (adt7475) Split device update function to measure and limits
  hwmon: k10temp: Support Threadripper 2920X, 2970WX; simplify offset table
  hwmon: (k10temp) 27C Offset needed for Threadripper2
  hwmon: (iio_hwmon) Use devm functions
  hwmon: Add NPCM7xx PWM and Fan driver
  dt-binding: hwmon: Add NPCM7xx PWM and Fan controller documentation
  hwmon: (pmbus/max34440) Add support for MAX34451.
  hwmon: Document the sensor enable attribute
  hwmon: (mlxreg-fan) Add support for Mellanox FAN driver
  hwmon: Mark expected switch fall-throughs
  hwmon: (nct6775) Fix comment in the description of pwm_mode
  hwmon: (nct7904) Fix UNSPECIFIED_INT warning
  hwmon: (nct7904) Fix CODE_INDENT error
  hwmon: (nct7904) Fix SPACING errors

Documentation/devicetree/bindings/hwmon/npcm750-pwm-fan.txt

+Nuvoton NPCM7xx PWM and Fan Tacho controller device
+
+The Nuvoton BMC NPCM7XX supports 8 Pulse-width modulation (PWM)
+controller outputs and 16 Fan tachometer controller inputs.
+
+Required properties for pwm-fan node
+- #address-cells : should be 1.
+- #size-cells	: should be 0.
+- compatible	: "nuvoton,npcm750-pwm-fan" for Poleg NPCM7XX.
+- reg			: specifies physical base address and size of the registers.
+- reg-names	: must contain:
+					* "pwm" for the PWM registers.
+					* "fan" for the Fan registers.
+- clocks		: phandle of reference clocks.
+- clock-names	: must contain
+					* "pwm" for PWM controller operating clock.
+					* "fan" for Fan controller operating clock.
+- interrupts	: contain the Fan interrupts with flags for falling edge.
+- pinctrl-names	: a pinctrl state named "default" must be defined.
+- pinctrl-0	: phandle referencing pin configuration of the PWM and Fan
+					controller ports.
+
+fan subnode format:
+===================
+Under fan subnode can be upto 8 child nodes, each child node representing a fan.
+Each fan subnode must have one PWM channel and atleast one Fan tach channel.
+
+For PWM channel can be configured cooling-levels to create cooling device.
+Cooling device could be bound to a thermal zone for the thermal control.
+
+Required properties for each child node:
+- reg : specify the PWM output channel.
+	integer value in the range 0 through 7, that represent
+	the PWM channel number that used.
+
+- fan-tach-ch : specify the Fan tach input channel.
+		integer value in the range 0 through 15, that represent
+		the fan tach channel number that used.
+
+		At least one Fan tach input channel is required
+
+Optional property for each child node:
+- cooling-levels: PWM duty cycle values in a range from 0 to 255
+                  which correspond to thermal cooling states.
+
+Examples:
+
+pwm_fan:pwm-fan-controller@103000 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	compatible = "nuvoton,npcm750-pwm-fan";
+	reg = <0x103000 0x2000>,
+		<0x180000 0x8000>;
+	reg-names = "pwm", "fan";
+	clocks = <&clk NPCM7XX_CLK_APB3>,
+		<&clk NPCM7XX_CLK_APB4>;
+	clock-names = "pwm","fan";
+	interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_pins &pwm1_pins &pwm2_pins
+			&fanin0_pins &fanin1_pins &fanin2_pins
+			&fanin3_pins &fanin4_pins>;
+	fan@0 {
+		reg = <0x00>;
+		fan-tach-ch = /bits/ 8 <0x00 0x01>;
+		cooling-levels = <127 255>;
+	};
+	fan@1 {
+		reg = <0x01>;
+		fan-tach-ch = /bits/ 8 <0x02 0x03>;
+	};
+	fan@2 {
+		reg = <0x02>;
+		fan-tach-ch = /bits/ 8 <0x04>;
+	};
+
+};

Documentation/hwmon/max34440

@@ -16,6 +16,11 @@ Supported chips:
     Prefixes: 'max34446'
     Addresses scanned: -
     Datasheet: http://datasheets.maximintegrated.com/en/ds/MAX34446.pdf
+  * Maxim MAX34451
+    PMBus 16-Channel V/I Monitor and 12-Channel Sequencer/Marginer
+    Prefixes: 'max34451'
+    Addresses scanned: -
+    Datasheet: http://datasheets.maximintegrated.com/en/ds/MAX34451.pdf
   * Maxim MAX34460
     PMBus 12-Channel Voltage Monitor & Sequencer
     Prefix: 'max34460'
@@ -36,9 +41,10 @@ Description
 This driver supports hardware monitoring for Maxim MAX34440 PMBus 6-Channel
 Power-Supply Manager, MAX34441 PMBus 5-Channel Power-Supply Manager
 and Intelligent Fan Controller, and MAX34446 PMBus Power-Supply Data Logger.
-It also supports the MAX34460 and MAX34461 PMBus Voltage Monitor & Sequencers.
-The MAX34460 supports 12 voltage channels, and the MAX34461 supports 16 voltage
-channels.
+It also supports the MAX34451, MAX34460, and MAX34461 PMBus Voltage Monitor &
+Sequencers. The MAX34451 supports monitoring voltage or current of 12 channels
+based on GIN pins. The MAX34460 supports 12 voltage channels, and the MAX34461
+supports 16 voltage channels.
 
 The driver is a client driver to the core PMBus driver. Please see
 Documentation/hwmon/pmbus for details on PMBus client drivers.
@@ -93,7 +99,7 @@ curr[1-6]_max		Maximum current. From IOUT_OC_WARN_LIMIT register.
 curr[1-6]_crit		Critical maximum current. From IOUT_OC_FAULT_LIMIT register.
 curr[1-6]_max_alarm	Current high alarm. From IOUT_OC_WARNING status.
 curr[1-6]_crit_alarm	Current critical high alarm. From IOUT_OC_FAULT status.
-curr[1-4]_average	Historical average current (MAX34446 only).
+curr[1-4]_average	Historical average current (MAX34446/34451 only).
 curr[1-6]_highest	Historical maximum current.
 curr[1-6]_reset_history	Write any value to reset history.
 
@@ -123,5 +129,7 @@ temp[1-8]_reset_history	Write any value to reset history.
 			temp7 and temp8 attributes only exist for MAX34440.
 			MAX34446 only supports temp[1-3].
 
+MAX34451 supports attribute groups in[1-16] (or curr[1-16] based on input pins)
+and temp[1-5].
 MAX34460 supports attribute groups in[1-12] and temp[1-5].
 MAX34461 supports attribute groups in[1-16] and temp[1-5].

Documentation/hwmon/mlxreg-fan

+Kernel driver mlxreg-fan
+========================
+
+Provides FAN control for the next Mellanox systems:
+QMB700, equipped with 40x200GbE InfiniBand ports;
+MSN3700, equipped with 32x200GbE or 16x400GbE Ethernet ports;
+MSN3410, equipped with 6x400GbE plus 48x50GbE Ethernet ports;
+MSN3800, equipped with 64x1000GbE Ethernet ports;
+These are the Top of the Rack systems, equipped with Mellanox switch
+board with Mellanox Quantum or Spectrume-2 devices.
+FAN controller is implemented by the programmable device logic.
+
+The default registers offsets set within the programmable device is as
+following:
+- pwm1			0xe3
+- fan1 (tacho1)		0xe4
+- fan2 (tacho2)		0xe5
+- fan3 (tacho3)		0xe6
+- fan4 (tacho4)		0xe7
+- fan5 (tacho5)		0xe8
+- fan6 (tacho6)		0xe9
+- fan7 (tacho7)		0xea
+- fan8 (tacho8)		0xeb
+- fan9 (tacho9)		0xec
+- fan10 (tacho10)	0xed
+- fan11 (tacho11)	0xee
+- fan12 (tacho12)	0xef
+This setup can be re-programmed with other registers.
+
+Author: Vadim Pasternak <vadimp@mellanox.com>
+
+Description
+-----------
+
+The driver implements a simple interface for driving a fan connected to
+a PWM output and tachometer inputs.
+This driver obtains PWM and tachometers registers location according to
+the system configuration and creates FAN/PWM hwmon objects and a cooling
+device. PWM and tachometers are sensed through the on-board programmable
+device, which exports its register map. This device could be attached to
+any bus type, for which register mapping is supported.
+Single instance is created with one PWM control, up to 12 tachometers and
+one cooling device. It could be as many instances as programmable device
+supports.
+The driver exposes the fan to the user space through the hwmon's and
+thermal's sysfs interfaces.
+
+/sys files in hwmon subsystem
+-----------------------------
+
+fan[1-12]_fault - RO files for tachometers TACH1-TACH12 fault indication
+fan[1-12]_input - RO files for tachometers TACH1-TACH12 input (in RPM)
+pwm1		- RW file for fan[1-12] target duty cycle (0..255)
+
+/sys files in thermal subsystem
+-------------------------------
+
+cur_state	- RW file for current cooling state of the cooling device
+		  (0..max_state)
+max_state	- RO file for maximum cooling state of the cooling device

Documentation/hwmon/npcm750-pwm-fan

+Kernel driver npcm750-pwm-fan
+=============================
+
+Supported chips:
+	NUVOTON NPCM750/730/715/705
+
+Authors:
+	<tomer.maimon@nuvoton.com>
+
+Description:
+------------
+This driver implements support for NUVOTON NPCM7XX PWM and Fan Tacho
+controller. The PWM controller supports up to 8 PWM outputs. The Fan tacho
+controller supports up to 16 tachometer inputs.
+
+The driver provides the following sensor accesses in sysfs:
+
+fanX_input	ro	provide current fan rotation value in RPM as reported
+			by the fan to the device.
+
+pwmX		rw	get or set PWM fan control value. This is an integer
+			value between 0(off) and 255(full speed).

Documentation/hwmon/sysfs-interface

@@ -171,6 +171,13 @@ in[0-*]_label	Suggested voltage channel label.
 		user-space.
 		RO
 
+in[0-*]_enable
+		Enable or disable the sensors.
+		When disabled the sensor read will return -ENODATA.
+		1: Enable
+		0: Disable
+		RW
+
 cpu[0-*]_vid	CPU core reference voltage.
 		Unit: millivolt
 		RO
@@ -236,6 +243,13 @@ fan[1-*]_label	Suggested fan channel label.
 		In all other cases, the label is provided by user-space.
 		RO
 
+fan[1-*]_enable
+		Enable or disable the sensors.
+		When disabled the sensor read will return -ENODATA.
+		1: Enable
+		0: Disable
+		RW
+
 Also see the Alarms section for status flags associated with fans.
 
 
@@ -409,6 +423,13 @@ temp_reset_history
 		Reset temp_lowest and temp_highest for all sensors
 		WO
 
+temp[1-*]_enable
+		Enable or disable the sensors.
+		When disabled the sensor read will return -ENODATA.
+		1: Enable
+		0: Disable
+		RW
+
 Some chips measure temperature using external thermistors and an ADC, and
 report the temperature measurement as a voltage. Converting this voltage
 back to a temperature (or the other way around for limits) requires
@@ -468,6 +489,13 @@ curr_reset_history
 		Reset currX_lowest and currX_highest for all sensors
 		WO
 
+curr[1-*]_enable
+		Enable or disable the sensors.
+		When disabled the sensor read will return -ENODATA.
+		1: Enable
+		0: Disable
+		RW
+
 Also see the Alarms section for status flags associated with currents.
 
 *********
@@ -566,6 +594,13 @@ power[1-*]_crit			Critical maximum power.
 				Unit: microWatt
 				RW
 
+power[1-*]_enable		Enable or disable the sensors.
+				When disabled the sensor read will return
+				-ENODATA.
+				1: Enable
+				0: Disable
+				RW
+
 Also see the Alarms section for status flags associated with power readings.
 
 **********
@@ -576,6 +611,12 @@ energy[1-*]_input		Cumulative energy use
 				Unit: microJoule
 				RO
 
+energy[1-*]_enable		Enable or disable the sensors.
+				When disabled the sensor read will return
+				-ENODATA.
+				1: Enable
+				0: Disable
+				RW
 
 ************
 * Humidity *
@@ -586,6 +627,13 @@ humidity[1-*]_input		Humidity
 				RO
 
 
+humidity[1-*]_enable		Enable or disable the sensors
+				When disabled the sensor read will return
+				-ENODATA.
+				1: Enable
+				0: Disable
+				RW
+
 **********
 * Alarms *
 **********

drivers/hwmon/Kconfig

@@ -937,6 +937,18 @@ config SENSORS_MCP3021
 	  This driver can also be built as a module.  If so, the module
 	  will be called mcp3021.
 
+config SENSORS_MLXREG_FAN
+	tristate "Mellanox Mellanox FAN driver"
+	depends on MELLANOX_PLATFORM
+	imply THERMAL
+	select REGMAP
+	help
+	  This option enables support for the FAN control on the Mellanox
+	  Ethernet and InfiniBand switches. The driver can be activated by the
+	  platform device add call. Say Y to enable these. To compile this
+	  driver as a module, choose 'M' here: the module will be called
+	  mlxreg-fan.
+
 config SENSORS_TC654
 	tristate "Microchip TC654/TC655 and compatibles"
 	depends on I2C
@@ -1256,6 +1268,16 @@ config SENSORS_NCT7904
 	  This driver can also be built as a module.  If so, the module
 	  will be called nct7904.
 
+config SENSORS_NPCM7XX
+	tristate "Nuvoton NPCM750 and compatible PWM and Fan controllers"
+	imply THERMAL
+	help
+	  This driver provides support for Nuvoton NPCM750/730/715/705 PWM
+          and Fan controllers.
+
+          This driver can also be built as a module. If so, the module
+          will be called npcm750-pwm-fan.
+
 config SENSORS_NSA320
 	tristate "ZyXEL NSA320 and compatible fan speed and temperature sensors"
 	depends on GPIOLIB && OF

drivers/hwmon/Makefile

@@ -129,11 +129,13 @@ obj-$(CONFIG_SENSORS_MAX31790)	+= max31790.o
 obj-$(CONFIG_SENSORS_MC13783_ADC)+= mc13783-adc.o
 obj-$(CONFIG_SENSORS_MCP3021)	+= mcp3021.o
 obj-$(CONFIG_SENSORS_TC654)	+= tc654.o
+obj-$(CONFIG_SENSORS_MLXREG_FAN) += mlxreg-fan.o
 obj-$(CONFIG_SENSORS_MENF21BMC_HWMON) += menf21bmc_hwmon.o
 obj-$(CONFIG_SENSORS_NCT6683)	+= nct6683.o
 obj-$(CONFIG_SENSORS_NCT6775)	+= nct6775.o
 obj-$(CONFIG_SENSORS_NCT7802)	+= nct7802.o
 obj-$(CONFIG_SENSORS_NCT7904)	+= nct7904.o
+obj-$(CONFIG_SENSORS_NPCM7XX)	+= npcm750-pwm-fan.o
 obj-$(CONFIG_SENSORS_NSA320)	+= nsa320-hwmon.o
 obj-$(CONFIG_SENSORS_NTC_THERMISTOR)	+= ntc_thermistor.o
 obj-$(CONFIG_SENSORS_PC87360)	+= pc87360.o

drivers/hwmon/emc1403.c

@@ -443,8 +443,10 @@ static int emc1403_probe(struct i2c_client *client,
 	switch (id->driver_data) {
 	case emc1404:
 		data->groups[2] = &emc1404_group;
+		/* fall through */
 	case emc1403:
 		data->groups[1] = &emc1403_group;
+		/* fall through */
 	case emc1402:
 		data->groups[0] = &emc1402_group;
 	}

drivers/hwmon/iio_hwmon.c

@@ -22,7 +22,6 @@
  * struct iio_hwmon_state - device instance state
  * @channels:		filled with array of channels from iio
  * @num_channels:	number of channels in channels (saves counting twice)
- * @hwmon_dev:		associated hwmon device
  * @attr_group:		the group of attributes
  * @groups:		null terminated array of attribute groups
  * @attrs:		null terminated array of attribute pointers.
@@ -30,7 +29,6 @@
 struct iio_hwmon_state {
 	struct iio_channel *channels;
 	int num_channels;
-	struct device *hwmon_dev;
 	struct attribute_group attr_group;
 	const struct attribute_group *groups[2];
 	struct attribute **attrs;
@@ -68,12 +66,13 @@ static int iio_hwmon_probe(struct platform_device *pdev)
 	enum iio_chan_type type;
 	struct iio_channel *channels;
 	const char *name = "iio_hwmon";
+	struct device *hwmon_dev;
 	char *sname;
 
 	if (dev->of_node && dev->of_node->name)
 		name = dev->of_node->name;
 
-	channels = iio_channel_get_all(dev);
+	channels = devm_iio_channel_get_all(dev);
 	if (IS_ERR(channels)) {
 		if (PTR_ERR(channels) == -ENODEV)
 			return -EPROBE_DEFER;
@@ -81,10 +80,8 @@ static int iio_hwmon_probe(struct platform_device *pdev)
 	}
 
 	st = devm_kzalloc(dev, sizeof(*st), GFP_KERNEL);
-	if (st == NULL) {
-		ret = -ENOMEM;
-		goto error_release_channels;
-	}
+	if (st == NULL)
+		return -ENOMEM;
 
 	st->channels = channels;
 
@@ -95,22 +92,18 @@ static int iio_hwmon_probe(struct platform_device *pdev)
 	st->attrs = devm_kcalloc(dev,
 				 st->num_channels + 1, sizeof(*st->attrs),
 				 GFP_KERNEL);
-	if (st->attrs == NULL) {
-		ret = -ENOMEM;
-		goto error_release_channels;
-	}
+	if (st->attrs == NULL)
+		return -ENOMEM;
 
 	for (i = 0; i < st->num_channels; i++) {
 		a = devm_kzalloc(dev, sizeof(*a), GFP_KERNEL);
-		if (a == NULL) {
-			ret = -ENOMEM;
-			goto error_release_channels;
-		}
+		if (a == NULL)
+			return -ENOMEM;
 
 		sysfs_attr_init(&a->dev_attr.attr);
 		ret = iio_get_channel_type(&st->channels[i], &type);
 		if (ret < 0)
-			goto error_release_channels;
+			return ret;
 
 		switch (type) {
 		case IIO_VOLTAGE:
@@ -134,13 +127,11 @@ static int iio_hwmon_probe(struct platform_device *pdev)
 							       humidity_i++);
 			break;
 		default:
-			ret = -EINVAL;
-			goto error_release_channels;
-		}
-		if (a->dev_attr.attr.name == NULL) {
-			ret = -ENOMEM;
-			goto error_release_channels;
+			return -EINVAL;
 		}
+		if (a->dev_attr.attr.name == NULL)
+			return -ENOMEM;
+
 		a->dev_attr.show = iio_hwmon_read_val;
 		a->dev_attr.attr.mode = S_IRUGO;
 		a->index = i;
@@ -151,34 +142,13 @@ static int iio_hwmon_probe(struct platform_device *pdev)
 	st->groups[0] = &st->attr_group;
 
 	sname = devm_kstrdup(dev, name, GFP_KERNEL);
-	if (!sname) {
-		ret = -ENOMEM;
-		goto error_release_channels;
-	}
+	if (!sname)
+		return -ENOMEM;
 
 	strreplace(sname, '-', '_');
-	st->hwmon_dev = hwmon_device_register_with_groups(dev, sname, st,
+	hwmon_dev = devm_hwmon_device_register_with_groups(dev, sname, st,
 							   st->groups);
-	if (IS_ERR(st->hwmon_dev)) {
-		ret = PTR_ERR(st->hwmon_dev);
-		goto error_release_channels;
-	}
-	platform_set_drvdata(pdev, st);
-	return 0;
-
-error_release_channels:
-	iio_channel_release_all(channels);
-	return ret;
-}
-
-static int iio_hwmon_remove(struct platform_device *pdev)
-{
-	struct iio_hwmon_state *st = platform_get_drvdata(pdev);
-
-	hwmon_device_unregister(st->hwmon_dev);
-	iio_channel_release_all(st->channels);
-
-	return 0;
+	return PTR_ERR_OR_ZERO(hwmon_dev);
 }
 
 static const struct of_device_id iio_hwmon_of_match[] = {
@@ -193,7 +163,6 @@ static struct platform_driver __refdata iio_hwmon_driver = {
 		.of_match_table = iio_hwmon_of_match,
 	},
 	.probe = iio_hwmon_probe,
-	.remove = iio_hwmon_remove,
 };
 
 module_platform_driver(iio_hwmon_driver);

drivers/hwmon/k10temp.c

@@ -99,12 +99,8 @@ static const struct tctl_offset tctl_offset_table[] = {
 	{ 0x17, "AMD Ryzen 7 1700X", 20000 },
 	{ 0x17, "AMD Ryzen 7 1800X", 20000 },
 	{ 0x17, "AMD Ryzen 7 2700X", 10000 },
-	{ 0x17, "AMD Ryzen Threadripper 1950X", 27000 },
-	{ 0x17, "AMD Ryzen Threadripper 1920X", 27000 },
-	{ 0x17, "AMD Ryzen Threadripper 1900X", 27000 },
-	{ 0x17, "AMD Ryzen Threadripper 1950", 10000 },
-	{ 0x17, "AMD Ryzen Threadripper 1920", 10000 },
-	{ 0x17, "AMD Ryzen Threadripper 1910", 10000 },
+	{ 0x17, "AMD Ryzen Threadripper 19", 27000 }, /* 19{00,20,50}X */
+	{ 0x17, "AMD Ryzen Threadripper 29", 27000 }, /* 29{20,50,70,90}[W]X */
 };
 
 static void read_htcreg_pci(struct pci_dev *pdev, u32 *regval)

drivers/hwmon/nct6775.c

@@ -1050,8 +1050,8 @@ struct nct6775_data {
 	u64 beeps;
 
 	u8 pwm_num;	/* number of pwm */
-	u8 pwm_mode[NUM_FAN];	/* 1->DC variable voltage,
-				 * 0->PWM variable duty cycle
+	u8 pwm_mode[NUM_FAN];	/* 0->DC variable voltage,
+				 * 1->PWM variable duty cycle
 				 */
 	enum pwm_enable pwm_enable[NUM_FAN];
 			/* 0->off
@@ -2541,7 +2541,7 @@ static void pwm_update_registers(struct nct6775_data *data, int nr)
 	case thermal_cruise:
 		nct6775_write_value(data, data->REG_TARGET[nr],
 				    data->target_temp[nr]);
-		/* intentional */
+		/* fall through  */
 	default:
 		reg = nct6775_read_value(data, data->REG_FAN_MODE[nr]);
 		reg = (reg & ~data->tolerance_mask) |

drivers/hwmon/nct7904.c

@@ -77,7 +77,7 @@ struct nct7904_data {
 };
 
 /* Access functions */
-static int nct7904_bank_lock(struct nct7904_data *data, unsigned bank)
+static int nct7904_bank_lock(struct nct7904_data *data, unsigned int bank)
 {
 	int ret;
 
@@ -99,7 +99,7 @@ static inline void nct7904_bank_release(struct nct7904_data *data)
 
 /* Read 1-byte register. Returns unsigned reg or -ERRNO on error. */
 static int nct7904_read_reg(struct nct7904_data *data,
-			    unsigned bank, unsigned reg)
+			    unsigned int bank, unsigned int reg)
 {
 	struct i2c_client *client = data->client;
 	int ret;
@@ -117,7 +117,7 @@ static int nct7904_read_reg(struct nct7904_data *data,
  * -ERRNO on error.
  */
 static int nct7904_read_reg16(struct nct7904_data *data,
-			      unsigned bank, unsigned reg)
+			      unsigned int bank, unsigned int reg)
 {
 	struct i2c_client *client = data->client;
 	int ret, hi;
@@ -139,7 +139,7 @@ static int nct7904_read_reg16(struct nct7904_data *data,
 
 /* Write 1-byte register. Returns 0 or -ERRNO on error. */
 static int nct7904_write_reg(struct nct7904_data *data,
-			     unsigned bank, unsigned reg, u8 val)
+			     unsigned int bank, unsigned int reg, u8 val)
 {
 	struct i2c_client *client = data->client;
 	int ret;
@@ -159,7 +159,7 @@ static int nct7904_read_fan(struct device *dev, u32 attr, int channel,
 	unsigned int cnt, rpm;
 	int ret;
 
-	switch(attr) {
+	switch (attr) {
 	case hwmon_fan_input:
 		ret = nct7904_read_reg16(data, BANK_0,
 					 FANIN1_HV_REG + channel * 2);
@@ -200,7 +200,7 @@ static int nct7904_read_in(struct device *dev, u32 attr, int channel,
 
 	index = nct7904_chan_to_index[channel];
 
-	switch(attr) {
+	switch (attr) {
 	case hwmon_in_input:
 		ret = nct7904_read_reg16(data, BANK_0,
 					 VSEN1_HV_REG + index * 2);
@@ -236,7 +236,7 @@ static int nct7904_read_temp(struct device *dev, u32 attr, int channel,
 	struct nct7904_data *data = dev_get_drvdata(dev);
 	int ret, temp;
 
-	switch(attr) {
+	switch (attr) {
 	case hwmon_temp_input:
 		if (channel == 0)
 			ret = nct7904_read_reg16(data, BANK_0, LTD_HV_REG);
@@ -276,7 +276,7 @@ static int nct7904_read_pwm(struct device *dev, u32 attr, int channel,
 	struct nct7904_data *data = dev_get_drvdata(dev);
 	int ret;
 
-	switch(attr) {
+	switch (attr) {
 	case hwmon_pwm_input:
 		ret = nct7904_read_reg(data, BANK_3, FANCTL1_OUT_REG + channel);
 		if (ret < 0)
@@ -301,7 +301,7 @@ static int nct7904_write_pwm(struct device *dev, u32 attr, int channel,
 	struct nct7904_data *data = dev_get_drvdata(dev);
 	int ret;
 
-	switch(attr) {
+	switch (attr) {
 	case hwmon_pwm_input:
 		if (val < 0 || val > 255)
 			return -EINVAL;
@@ -322,7 +322,7 @@ static int nct7904_write_pwm(struct device *dev, u32 attr, int channel,
 
 static umode_t nct7904_pwm_is_visible(const void *_data, u32 attr, int channel)
 {
-	switch(attr) {
+	switch (attr) {
 	case hwmon_pwm_input:
 	case hwmon_pwm_enable:
 		return S_IRUGO | S_IWUSR;

drivers/hwmon/pmbus/Kconfig

@@ -130,7 +130,7 @@ config SENSORS_MAX34440
 	default n
 	help
 	  If you say yes here you get hardware monitoring support for Maxim
-	  MAX34440, MAX34441, MAX34446, MAX34460, and MAX34461.
+	  MAX34440, MAX34441, MAX34446, MAX34451, MAX34460, and MAX34461.
 
 	  This driver can also be built as a module. If so, the module will
 	  be called max34440.

drivers/hwmon/pmbus/max34440.c

@@ -27,7 +27,7 @@
 #include <linux/i2c.h>
 #include "pmbus.h"
 
-enum chips { max34440, max34441, max34446, max34460, max34461 };
+enum chips { max34440, max34441, max34446, max34451, max34460, max34461 };
 
 #define MAX34440_MFR_VOUT_PEAK		0xd4
 #define MAX34440_MFR_IOUT_PEAK		0xd5
@@ -44,6 +44,9 @@ enum chips { max34440, max34441, max34446, max34460, max34461 };
 #define MAX34440_STATUS_OT_FAULT	BIT(5)
 #define MAX34440_STATUS_OT_WARN		BIT(6)
 
+#define MAX34451_MFR_CHANNEL_CONFIG	0xe4
+#define MAX34451_MFR_CHANNEL_CONFIG_SEL_MASK	0x3f
+
 struct max34440_data {
 	int id;
 	struct pmbus_driver_info info;
@@ -67,7 +70,7 @@ static int max34440_read_word_data(struct i2c_client *client, int page, int reg)
 					   MAX34440_MFR_VOUT_PEAK);
 		break;
 	case PMBUS_VIRT_READ_IOUT_AVG:
-		if (data->id != max34446)
+		if (data->id != max34446 && data->id != max34451)
 			return -ENXIO;
 		ret = pmbus_read_word_data(client, page,
 					   MAX34446_MFR_IOUT_AVG);
@@ -143,7 +146,7 @@ static int max34440_write_word_data(struct i2c_client *client, int page,
 	case PMBUS_VIRT_RESET_IOUT_HISTORY:
 		ret = pmbus_write_word_data(client, page,
 					    MAX34440_MFR_IOUT_PEAK, 0);
-		if (!ret && data->id == max34446)
+		if (!ret && (data->id == max34446 || data->id == max34451))
 			ret = pmbus_write_word_data(client, page,
 					MAX34446_MFR_IOUT_AVG, 0);
 
@@ -202,6 +205,58 @@ static int max34440_read_byte_data(struct i2c_client *client, int page, int reg)
 	return ret;
 }
 
+static int max34451_set_supported_funcs(struct i2c_client *client,
+					 struct max34440_data *data)
+{
+	/*
+	 * Each of the channel 0-15 can be configured to monitor the following
+	 * functions based on MFR_CHANNEL_CONFIG[5:0]
+	 * 0x10: Sequencing + voltage monitoring (only valid for PAGES 0–11)
+	 * 0x20: Voltage monitoring (no sequencing)
+	 * 0x21: Voltage read only
+	 * 0x22: Current monitoring
+	 * 0x23: Current read only
+	 * 0x30: General-purpose input active low
+	 * 0x34: General-purpose input active high
+	 * 0x00:  Disabled
+	 */
+
+	int page, rv;
+
+	for (page = 0; page < 16; page++) {
+		rv = i2c_smbus_write_byte_data(client, PMBUS_PAGE, page);
+		if (rv < 0)
+			return rv;
+
+		rv = i2c_smbus_read_word_data(client,
+					      MAX34451_MFR_CHANNEL_CONFIG);
+		if (rv < 0)
+			return rv;
+
+		switch (rv & MAX34451_MFR_CHANNEL_CONFIG_SEL_MASK) {
+		case 0x10:
+		case 0x20:
+			data->info.func[page] = PMBUS_HAVE_VOUT |
+				PMBUS_HAVE_STATUS_VOUT;
+			break;
+		case 0x21:
+			data->info.func[page] = PMBUS_HAVE_VOUT;
+			break;
+		case 0x22:
+			data->info.func[page] = PMBUS_HAVE_IOUT |
+				PMBUS_HAVE_STATUS_IOUT;
+			break;
+		case 0x23:
+			data->info.func[page] = PMBUS_HAVE_IOUT;
+			break;
+		default:
+			break;
+		}
+	}
+
+	return 0;
+}
+
 static struct pmbus_driver_info max34440_info[] = {
 	[max34440] = {
 		.pages = 14,
@@ -325,6 +380,30 @@ static struct pmbus_driver_info max34440_info[] = {
 		.read_word_data = max34440_read_word_data,
 		.write_word_data = max34440_write_word_data,
 	},
+	[max34451] = {
+		.pages = 21,
+		.format[PSC_VOLTAGE_OUT] = direct,
+		.format[PSC_TEMPERATURE] = direct,
+		.format[PSC_CURRENT_OUT] = direct,
+		.m[PSC_VOLTAGE_OUT] = 1,
+		.b[PSC_VOLTAGE_OUT] = 0,
+		.R[PSC_VOLTAGE_OUT] = 3,
+		.m[PSC_CURRENT_OUT] = 1,
+		.b[PSC_CURRENT_OUT] = 0,
+		.R[PSC_CURRENT_OUT] = 2,
+		.m[PSC_TEMPERATURE] = 1,
+		.b[PSC_TEMPERATURE] = 0,
+		.R[PSC_TEMPERATURE] = 2,
+		/* func 0-15 is set dynamically before probing */
+		.func[16] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
+		.func[17] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
+		.func[18] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
+		.func[19] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
+		.func[20] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
+		.read_byte_data = max34440_read_byte_data,
+		.read_word_data = max34440_read_word_data,
+		.write_word_data = max34440_write_word_data,
+	},
 	[max34460] = {
 		.pages = 18,
 		.format[PSC_VOLTAGE_OUT] = direct,
@@ -398,6 +477,7 @@ static int max34440_probe(struct i2c_client *client,
 			  const struct i2c_device_id *id)
 {
 	struct max34440_data *data;
+	int rv;
 
 	data = devm_kzalloc(&client->dev, sizeof(struct max34440_data),
 			    GFP_KERNEL);
@@ -406,6 +486,12 @@ static int max34440_probe(struct i2c_client *client,
 	data->id = id->driver_data;
 	data->info = max34440_info[id->driver_data];
 
+	if (data->id == max34451) {
+		rv = max34451_set_supported_funcs(client, data);
+		if (rv)
+			return rv;
+	}
+
 	return pmbus_do_probe(client, id, &data->info);
 }
 
@@ -413,6 +499,7 @@ static const struct i2c_device_id max34440_id[] = {
 	{"max34440", max34440},
 	{"max34441", max34441},
 	{"max34446", max34446},
+	{"max34451", max34451},
 	{"max34460", max34460},
 	{"max34461", max34461},
 	{}