r8152: sync ocp base

There are some chances that the actual base of hardware is different
from the value recorded by driver, so we have to reset the variable
of ocp_base to sync it.

Set ocp_base to -1. Then, it would be updated and the new base would be
set to the hardware next time.
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

drivers/net/usb/r8152.c

@@ -32,7 +32,7 @@
 #define NETNEXT_VERSION		"12"
 
 /* Information for net */
-#define NET_VERSION		"11"
+#define NET_VERSION		"12"
 
 #define DRIVER_VERSION		"v1." NETNEXT_VERSION "." NET_VERSION
 #define DRIVER_AUTHOR "Realtek linux nic maintainers <nic_swsd@realtek.com>"
@@ -4016,6 +4016,11 @@ static void rtl_clear_bp(struct r8152 *tp, u16 type)
 	ocp_write_word(tp, type, PLA_BP_BA, 0);
 }
 
+static inline void rtl_reset_ocp_base(struct r8152 *tp)
+{
+	tp->ocp_base = -1;
+}
+
 static int rtl_phy_patch_request(struct r8152 *tp, bool request, bool wait)
 {
 	u16 data, check;
@@ -4087,8 +4092,6 @@ static int rtl_post_ram_code(struct r8152 *tp, u16 key_addr, bool wait)
 
 	rtl_phy_patch_request(tp, false, wait);
 
-	ocp_write_word(tp, MCU_TYPE_PLA, PLA_OCP_GPHY_BASE, tp->ocp_base);
-
 	return 0;
 }
 
@@ -4800,6 +4803,8 @@ static void rtl_ram_code_speed_up(struct r8152 *tp, struct fw_phy_speed_up *phy,
 	u32 len;
 	u8 *data;
 
+	rtl_reset_ocp_base(tp);
+
 	if (sram_read(tp, SRAM_GPHY_FW_VER) >= __le16_to_cpu(phy->version)) {
 		dev_dbg(&tp->intf->dev, "PHY firmware has been the newest\n");
 		return;
@@ -4845,7 +4850,8 @@ static void rtl_ram_code_speed_up(struct r8152 *tp, struct fw_phy_speed_up *phy,
 		}
 	}
 
-	ocp_write_word(tp, MCU_TYPE_PLA, PLA_OCP_GPHY_BASE, tp->ocp_base);
+	rtl_reset_ocp_base(tp);
+
 	rtl_phy_patch_request(tp, false, wait);
 
 	if (sram_read(tp, SRAM_GPHY_FW_VER) == __le16_to_cpu(phy->version))
@@ -4861,6 +4867,8 @@ static int rtl8152_fw_phy_ver(struct r8152 *tp, struct fw_phy_ver *phy_ver)
 	ver_addr = __le16_to_cpu(phy_ver->ver.addr);
 	ver = __le16_to_cpu(phy_ver->ver.data);
 
+	rtl_reset_ocp_base(tp);
+
 	if (sram_read(tp, ver_addr) >= ver) {
 		dev_dbg(&tp->intf->dev, "PHY firmware has been the newest\n");
 		return 0;
@@ -4877,6 +4885,8 @@ static void rtl8152_fw_phy_fixup(struct r8152 *tp, struct fw_phy_fixup *fix)
 {
 	u16 addr, data;
 
+	rtl_reset_ocp_base(tp);
+
 	addr = __le16_to_cpu(fix->setting.addr);
 	data = ocp_reg_read(tp, addr);
 
@@ -4908,6 +4918,8 @@ static void rtl8152_fw_phy_union_apply(struct r8152 *tp, struct fw_phy_union *ph
 	u32 length;
 	int i, num;
 
+	rtl_reset_ocp_base(tp);
+
 	num = phy->pre_num;
 	for (i = 0; i < num; i++)
 		sram_write(tp, __le16_to_cpu(phy->pre_set[i].addr),
@@ -4938,6 +4950,8 @@ static void rtl8152_fw_phy_nc_apply(struct r8152 *tp, struct fw_phy_nc *phy)
 	u32 length, i, num;
 	__le16 *data;
 
+	rtl_reset_ocp_base(tp);
+
 	mode_reg = __le16_to_cpu(phy->mode_reg);
 	sram_write(tp, mode_reg, __le16_to_cpu(phy->mode_pre));
 	sram_write(tp, __le16_to_cpu(phy->ba_reg),
@@ -5107,6 +5121,7 @@ static void rtl8152_apply_firmware(struct r8152 *tp, bool power_cut)
 	if (rtl_fw->post_fw)
 		rtl_fw->post_fw(tp);
 
+	rtl_reset_ocp_base(tp);
 	strscpy(rtl_fw->version, fw_hdr->version, RTL_VER_SIZE);
 	dev_info(&tp->intf->dev, "load %s successfully\n", rtl_fw->version);
 }
@@ -8484,6 +8499,8 @@ static int rtl8152_resume(struct usb_interface *intf)
 
 	mutex_lock(&tp->control);
 
+	rtl_reset_ocp_base(tp);
+
 	if (test_bit(SELECTIVE_SUSPEND, &tp->flags))
 		ret = rtl8152_runtime_resume(tp);
 	else
@@ -8499,6 +8516,7 @@ static int rtl8152_reset_resume(struct usb_interface *intf)
 	struct r8152 *tp = usb_get_intfdata(intf);
 
 	clear_bit(SELECTIVE_SUSPEND, &tp->flags);
+	rtl_reset_ocp_base(tp);
 	tp->rtl_ops.init(tp);
 	queue_delayed_work(system_long_wq, &tp->hw_phy_work, 0);
 	set_ethernet_addr(tp, true);