Commit b33ecca8 authored by Hans de Goede's avatar Hans de Goede Committed by Kishon Vijay Abraham I

phy-sun4i-usb: Add support for peripheral-only mode

Use the new of_usb_get_dr_mode_by_phy() function to get the dr_mode
from the musb controller node instead of assuming that having an id_det
gpio means otg mode, and not having one means host mode.

Implement peripheral-only mode by adding a sun4i_usb_phy0_get_id_det
helper which looks at the dr_mode, always registering our extcon and
always monitoring vbus.

If dr_mode is not specified in the dts, do not register phy0 as we then
do not know how to treat it. This is actually a good thing as this means
we will not be registering phy0 on devices where the otg controller is
not enabled in the devicetree.
Signed-off-by: default avatarHans de Goede <hdegoede@redhat.com>
Acked-by: default avatarKishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: default avatarKishon Vijay Abraham I <kishon@ti.com>
parent 29b4817d
......@@ -40,6 +40,7 @@
#include <linux/power_supply.h>
#include <linux/regulator/consumer.h>
#include <linux/reset.h>
#include <linux/usb/of.h>
#include <linux/workqueue.h>
#define REG_ISCR 0x00
......@@ -110,6 +111,7 @@ struct sun4i_usb_phy_cfg {
struct sun4i_usb_phy_data {
void __iomem *base;
const struct sun4i_usb_phy_cfg *cfg;
enum usb_dr_mode dr_mode;
struct mutex mutex;
struct sun4i_usb_phy {
struct phy *phy;
......@@ -120,6 +122,7 @@ struct sun4i_usb_phy_data {
bool regulator_on;
int index;
} phys[MAX_PHYS];
int first_phy;
/* phy0 / otg related variables */
struct extcon_dev *extcon;
bool phy0_init;
......@@ -285,16 +288,10 @@ static int sun4i_usb_phy_init(struct phy *_phy)
sun4i_usb_phy0_update_iscr(_phy, 0, ISCR_DPDM_PULLUP_EN);
sun4i_usb_phy0_update_iscr(_phy, 0, ISCR_ID_PULLUP_EN);
if (data->id_det_gpio) {
/* OTG mode, force ISCR and cable state updates */
/* Force ISCR and cable state updates */
data->id_det = -1;
data->vbus_det = -1;
queue_delayed_work(system_wq, &data->detect, 0);
} else {
/* Host only mode */
sun4i_usb_phy0_set_id_detect(_phy, 0);
sun4i_usb_phy0_set_vbus_detect(_phy, 1);
}
}
return 0;
......@@ -319,6 +316,19 @@ static int sun4i_usb_phy_exit(struct phy *_phy)
return 0;
}
static int sun4i_usb_phy0_get_id_det(struct sun4i_usb_phy_data *data)
{
switch (data->dr_mode) {
case USB_DR_MODE_OTG:
return gpiod_get_value_cansleep(data->id_det_gpio);
case USB_DR_MODE_HOST:
return 0;
case USB_DR_MODE_PERIPHERAL:
default:
return 1;
}
}
static int sun4i_usb_phy0_get_vbus_det(struct sun4i_usb_phy_data *data)
{
if (data->vbus_det_gpio)
......@@ -432,7 +442,10 @@ static void sun4i_usb_phy0_id_vbus_det_scan(struct work_struct *work)
struct phy *phy0 = data->phys[0].phy;
int id_det, vbus_det, id_notify = 0, vbus_notify = 0;
id_det = gpiod_get_value_cansleep(data->id_det_gpio);
if (phy0 == NULL)
return;
id_det = sun4i_usb_phy0_get_id_det(data);
vbus_det = sun4i_usb_phy0_get_vbus_det(data);
mutex_lock(&phy0->mutex);
......@@ -448,7 +461,8 @@ static void sun4i_usb_phy0_id_vbus_det_scan(struct work_struct *work)
* without vbus detection report vbus low for long enough for
* the musb-ip to end the current device session.
*/
if (!sun4i_usb_phy0_have_vbus_det(data) && id_det == 0) {
if (data->dr_mode == USB_DR_MODE_OTG &&
!sun4i_usb_phy0_have_vbus_det(data) && id_det == 0) {
sun4i_usb_phy0_set_vbus_detect(phy0, 0);
msleep(200);
sun4i_usb_phy0_set_vbus_detect(phy0, 1);
......@@ -474,7 +488,8 @@ static void sun4i_usb_phy0_id_vbus_det_scan(struct work_struct *work)
* without vbus detection report vbus low for long enough to
* the musb-ip to end the current host session.
*/
if (!sun4i_usb_phy0_have_vbus_det(data) && id_det == 1) {
if (data->dr_mode == USB_DR_MODE_OTG &&
!sun4i_usb_phy0_have_vbus_det(data) && id_det == 1) {
mutex_lock(&phy0->mutex);
sun4i_usb_phy0_set_vbus_detect(phy0, 0);
msleep(1000);
......@@ -519,7 +534,8 @@ static struct phy *sun4i_usb_phy_xlate(struct device *dev,
{
struct sun4i_usb_phy_data *data = dev_get_drvdata(dev);
if (args->args[0] >= data->cfg->num_phys)
if (args->args[0] < data->first_phy ||
args->args[0] >= data->cfg->num_phys)
return ERR_PTR(-ENODEV);
return data->phys[args->args[0]].phy;
......@@ -593,13 +609,17 @@ static int sun4i_usb_phy_probe(struct platform_device *pdev)
return -EPROBE_DEFER;
}
/* vbus_det without id_det makes no sense, and is not supported */
if (sun4i_usb_phy0_have_vbus_det(data) && !data->id_det_gpio) {
data->dr_mode = of_usb_get_dr_mode_by_phy(np, 0);
switch (data->dr_mode) {
case USB_DR_MODE_OTG:
/* otg without id_det makes no sense, and is not supported */
if (!data->id_det_gpio) {
dev_err(dev, "usb0_id_det missing or invalid\n");
return -ENODEV;
}
if (data->id_det_gpio) {
/* fall through */
case USB_DR_MODE_HOST:
case USB_DR_MODE_PERIPHERAL:
data->extcon = devm_extcon_dev_allocate(dev,
sun4i_usb_phy0_cable);
if (IS_ERR(data->extcon))
......@@ -610,9 +630,13 @@ static int sun4i_usb_phy_probe(struct platform_device *pdev)
dev_err(dev, "failed to register extcon: %d\n", ret);
return ret;
}
break;
default:
dev_info(dev, "dr_mode unknown, not registering usb phy0\n");
data->first_phy = 1;
}
for (i = 0; i < data->cfg->num_phys; i++) {
for (i = data->first_phy; i < data->cfg->num_phys; i++) {
struct sun4i_usb_phy *phy = data->phys + i;
char name[16];
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment