Commit b445e26c authored by David S. Miller's avatar David S. Miller

[SPARC64]: Avoid membar instructions in delay slots.

In particular, avoid membar instructions in the delay
slot of a jmpl instruction.

UltraSPARC-I, II, IIi, and IIe have a bug, documented in
the UltraSPARC-IIi User's Manual, Appendix K, Erratum 51

The long and short of it is that if the IMU unit misses
on a branch or jmpl, and there is a store buffer synchronizing
membar in the delay slot, the chip can stop fetching instructions.

If interrupts are enabled or some other trap is enabled, the
chip will unwedge itself, but performance will suffer.

We already had a workaround for this bug in a few spots, but
it's better to have the entire tree sanitized for this rule.
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 020f46a3
......@@ -271,8 +271,9 @@ cplus_fptrap_insn_1:
fmuld %f0, %f2, %f26
faddd %f0, %f2, %f28
fmuld %f0, %f2, %f30
b,pt %xcc, fpdis_exit
membar #Sync
b,pt %xcc, fpdis_exit
nop
2: andcc %g5, FPRS_DU, %g0
bne,pt %icc, 3f
fzero %f32
......@@ -301,8 +302,9 @@ cplus_fptrap_insn_2:
fmuld %f32, %f34, %f58
faddd %f32, %f34, %f60
fmuld %f32, %f34, %f62
ba,pt %xcc, fpdis_exit
membar #Sync
ba,pt %xcc, fpdis_exit
nop
3: mov SECONDARY_CONTEXT, %g3
add %g6, TI_FPREGS, %g1
ldxa [%g3] ASI_DMMU, %g5
......
......@@ -32,8 +32,9 @@ static __inline__ int __sem_update_count(struct semaphore *sem, int incr)
" add %1, %4, %1\n"
" cas [%3], %0, %1\n"
" cmp %0, %1\n"
" bne,pn %%icc, 1b\n"
" membar #StoreLoad | #StoreStore\n"
" bne,pn %%icc, 1b\n"
" nop\n"
: "=&r" (old_count), "=&r" (tmp), "=m" (sem->count)
: "r" (&sem->count), "r" (incr), "m" (sem->count)
: "cc");
......@@ -71,8 +72,9 @@ void up(struct semaphore *sem)
" cmp %%g1, %%g7\n"
" bne,pn %%icc, 1b\n"
" addcc %%g7, 1, %%g0\n"
" ble,pn %%icc, 3f\n"
" membar #StoreLoad | #StoreStore\n"
" ble,pn %%icc, 3f\n"
" nop\n"
"2:\n"
" .subsection 2\n"
"3: mov %0, %%g1\n"
......@@ -128,8 +130,9 @@ void __sched down(struct semaphore *sem)
" cmp %%g1, %%g7\n"
" bne,pn %%icc, 1b\n"
" cmp %%g7, 1\n"
" bl,pn %%icc, 3f\n"
" membar #StoreLoad | #StoreStore\n"
" bl,pn %%icc, 3f\n"
" nop\n"
"2:\n"
" .subsection 2\n"
"3: mov %0, %%g1\n"
......@@ -233,8 +236,9 @@ int __sched down_interruptible(struct semaphore *sem)
" cmp %%g1, %%g7\n"
" bne,pn %%icc, 1b\n"
" cmp %%g7, 1\n"
" bl,pn %%icc, 3f\n"
" membar #StoreLoad | #StoreStore\n"
" bl,pn %%icc, 3f\n"
" nop\n"
"2:\n"
" .subsection 2\n"
"3: mov %2, %%g1\n"
......
......@@ -98,8 +98,9 @@ startup_continue:
sethi %hi(prom_entry_lock), %g2
1: ldstub [%g2 + %lo(prom_entry_lock)], %g1
brnz,pn %g1, 1b
membar #StoreLoad | #StoreStore
brnz,pn %g1, 1b
nop
sethi %hi(p1275buf), %g2
or %g2, %lo(p1275buf), %g2
......
......@@ -87,14 +87,17 @@
#define LOOP_CHUNK3(src, dest, len, branch_dest) \
MAIN_LOOP_CHUNK(src, dest, f32, f48, len, branch_dest)
#define DO_SYNC membar #Sync;
#define STORE_SYNC(dest, fsrc) \
EX_ST(STORE_BLK(%fsrc, %dest)); \
add %dest, 0x40, %dest;
add %dest, 0x40, %dest; \
DO_SYNC
#define STORE_JUMP(dest, fsrc, target) \
EX_ST(STORE_BLK(%fsrc, %dest)); \
add %dest, 0x40, %dest; \
ba,pt %xcc, target;
ba,pt %xcc, target; \
nop;
#define FINISH_VISCHUNK(dest, f0, f1, left) \
subcc %left, 8, %left;\
......@@ -239,17 +242,17 @@ FUNC_NAME: /* %o0=dst, %o1=src, %o2=len */
ba,pt %xcc, 1b+4
faligndata %f0, %f2, %f48
1: FREG_FROB(f16,f18,f20,f22,f24,f26,f28,f30,f32)
STORE_SYNC(o0, f48) membar #Sync
STORE_SYNC(o0, f48)
FREG_FROB(f32,f34,f36,f38,f40,f42,f44,f46,f0)
STORE_JUMP(o0, f48, 40f) membar #Sync
STORE_JUMP(o0, f48, 40f)
2: FREG_FROB(f32,f34,f36,f38,f40,f42,f44,f46,f0)
STORE_SYNC(o0, f48) membar #Sync
STORE_SYNC(o0, f48)
FREG_FROB(f0, f2, f4, f6, f8, f10,f12,f14,f16)
STORE_JUMP(o0, f48, 48f) membar #Sync
STORE_JUMP(o0, f48, 48f)
3: FREG_FROB(f0, f2, f4, f6, f8, f10,f12,f14,f16)
STORE_SYNC(o0, f48) membar #Sync
STORE_SYNC(o0, f48)
FREG_FROB(f16,f18,f20,f22,f24,f26,f28,f30,f32)
STORE_JUMP(o0, f48, 56f) membar #Sync
STORE_JUMP(o0, f48, 56f)
1: FREG_FROB(f2, f4, f6, f8, f10,f12,f14,f16,f18)
LOOP_CHUNK1(o1, o0, GLOBAL_SPARE, 1f)
......@@ -260,17 +263,17 @@ FUNC_NAME: /* %o0=dst, %o1=src, %o2=len */
ba,pt %xcc, 1b+4
faligndata %f2, %f4, %f48
1: FREG_FROB(f18,f20,f22,f24,f26,f28,f30,f32,f34)
STORE_SYNC(o0, f48) membar #Sync
STORE_SYNC(o0, f48)
FREG_FROB(f34,f36,f38,f40,f42,f44,f46,f0, f2)
STORE_JUMP(o0, f48, 41f) membar #Sync
STORE_JUMP(o0, f48, 41f)
2: FREG_FROB(f34,f36,f38,f40,f42,f44,f46,f0, f2)
STORE_SYNC(o0, f48) membar #Sync
STORE_SYNC(o0, f48)
FREG_FROB(f2, f4, f6, f8, f10,f12,f14,f16,f18)
STORE_JUMP(o0, f48, 49f) membar #Sync
STORE_JUMP(o0, f48, 49f)
3: FREG_FROB(f2, f4, f6, f8, f10,f12,f14,f16,f18)
STORE_SYNC(o0, f48) membar #Sync
STORE_SYNC(o0, f48)
FREG_FROB(f18,f20,f22,f24,f26,f28,f30,f32,f34)
STORE_JUMP(o0, f48, 57f) membar #Sync
STORE_JUMP(o0, f48, 57f)
1: FREG_FROB(f4, f6, f8, f10,f12,f14,f16,f18,f20)
LOOP_CHUNK1(o1, o0, GLOBAL_SPARE, 1f)
......@@ -281,17 +284,17 @@ FUNC_NAME: /* %o0=dst, %o1=src, %o2=len */
ba,pt %xcc, 1b+4
faligndata %f4, %f6, %f48
1: FREG_FROB(f20,f22,f24,f26,f28,f30,f32,f34,f36)
STORE_SYNC(o0, f48) membar #Sync
STORE_SYNC(o0, f48)
FREG_FROB(f36,f38,f40,f42,f44,f46,f0, f2, f4)
STORE_JUMP(o0, f48, 42f) membar #Sync
STORE_JUMP(o0, f48, 42f)
2: FREG_FROB(f36,f38,f40,f42,f44,f46,f0, f2, f4)
STORE_SYNC(o0, f48) membar #Sync
STORE_SYNC(o0, f48)
FREG_FROB(f4, f6, f8, f10,f12,f14,f16,f18,f20)
STORE_JUMP(o0, f48, 50f) membar #Sync
STORE_JUMP(o0, f48, 50f)
3: FREG_FROB(f4, f6, f8, f10,f12,f14,f16,f18,f20)
STORE_SYNC(o0, f48) membar #Sync
STORE_SYNC(o0, f48)
FREG_FROB(f20,f22,f24,f26,f28,f30,f32,f34,f36)
STORE_JUMP(o0, f48, 58f) membar #Sync
STORE_JUMP(o0, f48, 58f)
1: FREG_FROB(f6, f8, f10,f12,f14,f16,f18,f20,f22)
LOOP_CHUNK1(o1, o0, GLOBAL_SPARE, 1f)
......@@ -302,17 +305,17 @@ FUNC_NAME: /* %o0=dst, %o1=src, %o2=len */
ba,pt %xcc, 1b+4
faligndata %f6, %f8, %f48
1: FREG_FROB(f22,f24,f26,f28,f30,f32,f34,f36,f38)
STORE_SYNC(o0, f48) membar #Sync
STORE_SYNC(o0, f48)
FREG_FROB(f38,f40,f42,f44,f46,f0, f2, f4, f6)
STORE_JUMP(o0, f48, 43f) membar #Sync
STORE_JUMP(o0, f48, 43f)
2: FREG_FROB(f38,f40,f42,f44,f46,f0, f2, f4, f6)
STORE_SYNC(o0, f48) membar #Sync
STORE_SYNC(o0, f48)
FREG_FROB(f6, f8, f10,f12,f14,f16,f18,f20,f22)
STORE_JUMP(o0, f48, 51f) membar #Sync
STORE_JUMP(o0, f48, 51f)
3: FREG_FROB(f6, f8, f10,f12,f14,f16,f18,f20,f22)
STORE_SYNC(o0, f48) membar #Sync
STORE_SYNC(o0, f48)
FREG_FROB(f22,f24,f26,f28,f30,f32,f34,f36,f38)
STORE_JUMP(o0, f48, 59f) membar #Sync
STORE_JUMP(o0, f48, 59f)
1: FREG_FROB(f8, f10,f12,f14,f16,f18,f20,f22,f24)
LOOP_CHUNK1(o1, o0, GLOBAL_SPARE, 1f)
......@@ -323,17 +326,17 @@ FUNC_NAME: /* %o0=dst, %o1=src, %o2=len */
ba,pt %xcc, 1b+4
faligndata %f8, %f10, %f48
1: FREG_FROB(f24,f26,f28,f30,f32,f34,f36,f38,f40)
STORE_SYNC(o0, f48) membar #Sync
STORE_SYNC(o0, f48)
FREG_FROB(f40,f42,f44,f46,f0, f2, f4, f6, f8)
STORE_JUMP(o0, f48, 44f) membar #Sync
STORE_JUMP(o0, f48, 44f)
2: FREG_FROB(f40,f42,f44,f46,f0, f2, f4, f6, f8)
STORE_SYNC(o0, f48) membar #Sync
STORE_SYNC(o0, f48)
FREG_FROB(f8, f10,f12,f14,f16,f18,f20,f22,f24)
STORE_JUMP(o0, f48, 52f) membar #Sync
STORE_JUMP(o0, f48, 52f)
3: FREG_FROB(f8, f10,f12,f14,f16,f18,f20,f22,f24)
STORE_SYNC(o0, f48) membar #Sync
STORE_SYNC(o0, f48)
FREG_FROB(f24,f26,f28,f30,f32,f34,f36,f38,f40)
STORE_JUMP(o0, f48, 60f) membar #Sync
STORE_JUMP(o0, f48, 60f)
1: FREG_FROB(f10,f12,f14,f16,f18,f20,f22,f24,f26)
LOOP_CHUNK1(o1, o0, GLOBAL_SPARE, 1f)
......@@ -344,17 +347,17 @@ FUNC_NAME: /* %o0=dst, %o1=src, %o2=len */
ba,pt %xcc, 1b+4
faligndata %f10, %f12, %f48
1: FREG_FROB(f26,f28,f30,f32,f34,f36,f38,f40,f42)
STORE_SYNC(o0, f48) membar #Sync
STORE_SYNC(o0, f48)
FREG_FROB(f42,f44,f46,f0, f2, f4, f6, f8, f10)
STORE_JUMP(o0, f48, 45f) membar #Sync
STORE_JUMP(o0, f48, 45f)
2: FREG_FROB(f42,f44,f46,f0, f2, f4, f6, f8, f10)
STORE_SYNC(o0, f48) membar #Sync
STORE_SYNC(o0, f48)
FREG_FROB(f10,f12,f14,f16,f18,f20,f22,f24,f26)
STORE_JUMP(o0, f48, 53f) membar #Sync
STORE_JUMP(o0, f48, 53f)
3: FREG_FROB(f10,f12,f14,f16,f18,f20,f22,f24,f26)
STORE_SYNC(o0, f48) membar #Sync
STORE_SYNC(o0, f48)
FREG_FROB(f26,f28,f30,f32,f34,f36,f38,f40,f42)
STORE_JUMP(o0, f48, 61f) membar #Sync
STORE_JUMP(o0, f48, 61f)
1: FREG_FROB(f12,f14,f16,f18,f20,f22,f24,f26,f28)
LOOP_CHUNK1(o1, o0, GLOBAL_SPARE, 1f)
......@@ -365,17 +368,17 @@ FUNC_NAME: /* %o0=dst, %o1=src, %o2=len */
ba,pt %xcc, 1b+4
faligndata %f12, %f14, %f48
1: FREG_FROB(f28,f30,f32,f34,f36,f38,f40,f42,f44)
STORE_SYNC(o0, f48) membar #Sync
STORE_SYNC(o0, f48)
FREG_FROB(f44,f46,f0, f2, f4, f6, f8, f10,f12)
STORE_JUMP(o0, f48, 46f) membar #Sync
STORE_JUMP(o0, f48, 46f)
2: FREG_FROB(f44,f46,f0, f2, f4, f6, f8, f10,f12)
STORE_SYNC(o0, f48) membar #Sync
STORE_SYNC(o0, f48)
FREG_FROB(f12,f14,f16,f18,f20,f22,f24,f26,f28)
STORE_JUMP(o0, f48, 54f) membar #Sync
STORE_JUMP(o0, f48, 54f)
3: FREG_FROB(f12,f14,f16,f18,f20,f22,f24,f26,f28)
STORE_SYNC(o0, f48) membar #Sync
STORE_SYNC(o0, f48)
FREG_FROB(f28,f30,f32,f34,f36,f38,f40,f42,f44)
STORE_JUMP(o0, f48, 62f) membar #Sync
STORE_JUMP(o0, f48, 62f)
1: FREG_FROB(f14,f16,f18,f20,f22,f24,f26,f28,f30)
LOOP_CHUNK1(o1, o0, GLOBAL_SPARE, 1f)
......@@ -386,17 +389,17 @@ FUNC_NAME: /* %o0=dst, %o1=src, %o2=len */
ba,pt %xcc, 1b+4
faligndata %f14, %f16, %f48
1: FREG_FROB(f30,f32,f34,f36,f38,f40,f42,f44,f46)
STORE_SYNC(o0, f48) membar #Sync
STORE_SYNC(o0, f48)
FREG_FROB(f46,f0, f2, f4, f6, f8, f10,f12,f14)
STORE_JUMP(o0, f48, 47f) membar #Sync
STORE_JUMP(o0, f48, 47f)
2: FREG_FROB(f46,f0, f2, f4, f6, f8, f10,f12,f14)
STORE_SYNC(o0, f48) membar #Sync
STORE_SYNC(o0, f48)
FREG_FROB(f14,f16,f18,f20,f22,f24,f26,f28,f30)
STORE_JUMP(o0, f48, 55f) membar #Sync
STORE_JUMP(o0, f48, 55f)
3: FREG_FROB(f14,f16,f18,f20,f22,f24,f26,f28,f30)
STORE_SYNC(o0, f48) membar #Sync
STORE_SYNC(o0, f48)
FREG_FROB(f30,f32,f34,f36,f38,f40,f42,f44,f46)
STORE_JUMP(o0, f48, 63f) membar #Sync
STORE_JUMP(o0, f48, 63f)
40: FINISH_VISCHUNK(o0, f0, f2, g3)
41: FINISH_VISCHUNK(o0, f2, f4, g3)
......
......@@ -72,7 +72,11 @@ vis1: ldub [%g6 + TI_FPSAVED], %g3
stda %f48, [%g3 + %g1] ASI_BLK_P
5: membar #Sync
jmpl %g7 + %g0, %g0
ba,pt %xcc, 80f
nop
.align 32
80: jmpl %g7 + %g0, %g0
nop
6: ldub [%g3 + TI_FPSAVED], %o5
......@@ -87,8 +91,11 @@ vis1: ldub [%g6 + TI_FPSAVED], %g3
stda %f32, [%g2 + %g1] ASI_BLK_P
stda %f48, [%g3 + %g1] ASI_BLK_P
membar #Sync
jmpl %g7 + %g0, %g0
ba,pt %xcc, 80f
nop
.align 32
80: jmpl %g7 + %g0, %g0
nop
.align 32
......@@ -126,6 +133,10 @@ VISenterhalf:
stda %f0, [%g2 + %g1] ASI_BLK_P
stda %f16, [%g3 + %g1] ASI_BLK_P
membar #Sync
ba,pt %xcc, 4f
nop
.align 32
4: and %o5, FPRS_DU, %o5
jmpl %g7 + %g0, %g0
wr %o5, FPRS_FEF, %fprs
......@@ -7,18 +7,6 @@
#include <linux/config.h>
#include <asm/asi.h>
/* On SMP we need to use memory barriers to ensure
* correct memory operation ordering, nop these out
* for uniprocessor.
*/
#ifdef CONFIG_SMP
#define ATOMIC_PRE_BARRIER membar #StoreLoad | #LoadLoad
#define ATOMIC_POST_BARRIER membar #StoreLoad | #StoreStore
#else
#define ATOMIC_PRE_BARRIER nop
#define ATOMIC_POST_BARRIER nop
#endif
.text
/* Two versions of the atomic routines, one that
......@@ -52,6 +40,24 @@ atomic_sub: /* %o0 = decrement, %o1 = atomic_ptr */
nop
.size atomic_sub, .-atomic_sub
/* On SMP we need to use memory barriers to ensure
* correct memory operation ordering, nop these out
* for uniprocessor.
*/
#ifdef CONFIG_SMP
#define ATOMIC_PRE_BARRIER membar #StoreLoad | #LoadLoad;
#define ATOMIC_POST_BARRIER \
ba,pt %xcc, 80b; \
membar #StoreLoad | #StoreStore
80: retl
nop
#else
#define ATOMIC_PRE_BARRIER
#define ATOMIC_POST_BARRIER
#endif
.globl atomic_add_ret
.type atomic_add_ret,#function
atomic_add_ret: /* %o0 = increment, %o1 = atomic_ptr */
......@@ -62,9 +68,10 @@ atomic_add_ret: /* %o0 = increment, %o1 = atomic_ptr */
cmp %g1, %g7
bne,pn %icc, 1b
add %g7, %o0, %g7
sra %g7, 0, %o0
ATOMIC_POST_BARRIER
retl
sra %g7, 0, %o0
nop
.size atomic_add_ret, .-atomic_add_ret
.globl atomic_sub_ret
......@@ -77,9 +84,10 @@ atomic_sub_ret: /* %o0 = decrement, %o1 = atomic_ptr */
cmp %g1, %g7
bne,pn %icc, 1b
sub %g7, %o0, %g7
sra %g7, 0, %o0
ATOMIC_POST_BARRIER
retl
sra %g7, 0, %o0
nop
.size atomic_sub_ret, .-atomic_sub_ret
.globl atomic64_add
......@@ -118,9 +126,10 @@ atomic64_add_ret: /* %o0 = increment, %o1 = atomic_ptr */
cmp %g1, %g7
bne,pn %xcc, 1b
add %g7, %o0, %g7
mov %g7, %o0
ATOMIC_POST_BARRIER
retl
mov %g7, %o0
nop
.size atomic64_add_ret, .-atomic64_add_ret
.globl atomic64_sub_ret
......@@ -133,7 +142,8 @@ atomic64_sub_ret: /* %o0 = decrement, %o1 = atomic_ptr */
cmp %g1, %g7
bne,pn %xcc, 1b
sub %g7, %o0, %g7
mov %g7, %o0
ATOMIC_POST_BARRIER
retl
mov %g7, %o0
nop
.size atomic64_sub_ret, .-atomic64_sub_ret
......@@ -7,20 +7,26 @@
#include <linux/config.h>
#include <asm/asi.h>
.text
/* On SMP we need to use memory barriers to ensure
* correct memory operation ordering, nop these out
* for uniprocessor.
*/
#ifdef CONFIG_SMP
#define BITOP_PRE_BARRIER membar #StoreLoad | #LoadLoad
#define BITOP_POST_BARRIER membar #StoreLoad | #StoreStore
#define BITOP_POST_BARRIER \
ba,pt %xcc, 80b; \
membar #StoreLoad | #StoreStore
80: retl
nop
#else
#define BITOP_PRE_BARRIER nop
#define BITOP_POST_BARRIER nop
#define BITOP_PRE_BARRIER
#define BITOP_POST_BARRIER
#endif
.text
.globl test_and_set_bit
.type test_and_set_bit,#function
test_and_set_bit: /* %o0=nr, %o1=addr */
......@@ -37,10 +43,11 @@ test_and_set_bit: /* %o0=nr, %o1=addr */
cmp %g7, %g1
bne,pn %xcc, 1b
and %g7, %o2, %g2
BITOP_POST_BARRIER
clr %o0
retl
movrne %g2, 1, %o0
BITOP_POST_BARRIER
retl
nop
.size test_and_set_bit, .-test_and_set_bit
.globl test_and_clear_bit
......@@ -59,10 +66,11 @@ test_and_clear_bit: /* %o0=nr, %o1=addr */
cmp %g7, %g1
bne,pn %xcc, 1b
and %g7, %o2, %g2
BITOP_POST_BARRIER
clr %o0
retl
movrne %g2, 1, %o0
BITOP_POST_BARRIER
retl
nop
.size test_and_clear_bit, .-test_and_clear_bit
.globl test_and_change_bit
......@@ -81,10 +89,11 @@ test_and_change_bit: /* %o0=nr, %o1=addr */
cmp %g7, %g1
bne,pn %xcc, 1b
and %g7, %o2, %g2
BITOP_POST_BARRIER
clr %o0
retl
movrne %g2, 1, %o0
BITOP_POST_BARRIER
retl
nop
.size test_and_change_bit, .-test_and_change_bit
.globl set_bit
......
......@@ -252,8 +252,9 @@ void _do_write_lock (rwlock_t *rw, char *str)
" andn %%g1, %%g3, %%g7\n"
" casx [%0], %%g1, %%g7\n"
" cmp %%g1, %%g7\n"
" membar #StoreLoad | #StoreStore\n"
" bne,pn %%xcc, 1b\n"
" membar #StoreLoad | #StoreStore"
" nop"
: /* no outputs */
: "r" (&(rw->lock))
: "g3", "g1", "g7", "cc", "memory");
......@@ -351,8 +352,9 @@ int _do_write_trylock (rwlock_t *rw, char *str)
" andn %%g1, %%g3, %%g7\n"
" casx [%0], %%g1, %%g7\n"
" cmp %%g1, %%g7\n"
" membar #StoreLoad | #StoreStore\n"
" bne,pn %%xcc, 1b\n"
" membar #StoreLoad | #StoreStore"
" nop"
: /* no outputs */
: "r" (&(rw->lock))
: "g3", "g1", "g7", "cc", "memory");
......
......@@ -48,8 +48,9 @@ start_to_zero:
#endif
to_zero:
ldstub [%o1], %g3
brnz,pn %g3, spin_on_lock
membar #StoreLoad | #StoreStore
brnz,pn %g3, spin_on_lock
nop
loop2: cas [%o0], %g2, %g7 /* ASSERT(g7 == 0) */
cmp %g2, %g7
......@@ -71,8 +72,9 @@ loop2: cas [%o0], %g2, %g7 /* ASSERT(g7 == 0) */
nop
spin_on_lock:
ldub [%o1], %g3
brnz,pt %g3, spin_on_lock
membar #LoadLoad
brnz,pt %g3, spin_on_lock
nop
ba,pt %xcc, to_zero
nop
nop
......@@ -17,8 +17,9 @@ __down_read:
bne,pn %icc, 1b
add %g7, 1, %g7
cmp %g7, 0
bl,pn %icc, 3f
membar #StoreLoad | #StoreStore
bl,pn %icc, 3f
nop
2:
retl
nop
......@@ -57,8 +58,9 @@ __down_write:
cmp %g3, %g7
bne,pn %icc, 1b
cmp %g7, 0
bne,pn %icc, 3f
membar #StoreLoad | #StoreStore
bne,pn %icc, 3f
nop
2: retl
nop
3:
......@@ -97,8 +99,9 @@ __up_read:
cmp %g1, %g7
bne,pn %icc, 1b
cmp %g7, 0
bl,pn %icc, 3f
membar #StoreLoad | #StoreStore
bl,pn %icc, 3f
nop
2: retl
nop
3: sethi %hi(RWSEM_ACTIVE_MASK), %g1
......@@ -126,8 +129,9 @@ __up_write:
bne,pn %icc, 1b
sub %g7, %g1, %g7
cmp %g7, 0
bl,pn %icc, 3f
membar #StoreLoad | #StoreStore
bl,pn %icc, 3f
nop
2:
retl
nop
......@@ -151,8 +155,9 @@ __downgrade_write:
bne,pn %icc, 1b
sub %g7, %g1, %g7
cmp %g7, 0
bl,pn %icc, 3f
membar #StoreLoad | #StoreStore
bl,pn %icc, 3f
nop
2:
retl
nop
......
......@@ -136,8 +136,9 @@ static __inline__ void set_dcache_dirty(struct page *page, int this_cpu)
"or %%g1, %0, %%g1\n\t"
"casx [%2], %%g7, %%g1\n\t"
"cmp %%g7, %%g1\n\t"
"membar #StoreLoad | #StoreStore\n\t"
"bne,pn %%xcc, 1b\n\t"
" membar #StoreLoad | #StoreStore"
" nop"
: /* no outputs */
: "r" (mask), "r" (non_cpu_bits), "r" (&page->flags)
: "g1", "g7");
......@@ -157,8 +158,9 @@ static __inline__ void clear_dcache_dirty_cpu(struct page *page, unsigned long c
" andn %%g7, %1, %%g1\n\t"
"casx [%2], %%g7, %%g1\n\t"
"cmp %%g7, %%g1\n\t"
"membar #StoreLoad | #StoreStore\n\t"
"bne,pn %%xcc, 1b\n\t"
" membar #StoreLoad | #StoreStore\n"
" nop\n"
"2:"
: /* no outputs */
: "r" (cpu), "r" (mask), "r" (&page->flags),
......
......@@ -266,8 +266,9 @@ __cheetah_flush_tlb_pending: /* 22 insns */
andn %o3, 1, %o3
stxa %g0, [%o3] ASI_IMMU_DEMAP
2: stxa %g0, [%o3] ASI_DMMU_DEMAP
brnz,pt %o1, 1b
membar #Sync
brnz,pt %o1, 1b
nop
stxa %g2, [%o4] ASI_DMMU
flush %g6
wrpr %g0, 0, %tl
......
......@@ -55,8 +55,9 @@ static __inline__ int rwsem_atomic_update(int delta, struct rw_semaphore *sem)
"add %%g1, %1, %%g7\n\t"
"cas [%2], %%g1, %%g7\n\t"
"cmp %%g1, %%g7\n\t"
"membar #StoreLoad | #StoreStore\n\t"
"bne,pn %%icc, 1b\n\t"
" membar #StoreLoad | #StoreStore\n\t"
" nop\n\t"
"mov %%g7, %0\n\t"
: "=&r" (tmp)
: "0" (tmp), "r" (sem)
......
......@@ -52,12 +52,14 @@ static inline void _raw_spin_lock(spinlock_t *lock)
__asm__ __volatile__(
"1: ldstub [%1], %0\n"
" brnz,pn %0, 2f\n"
" membar #StoreLoad | #StoreStore\n"
" brnz,pn %0, 2f\n"
" nop\n"
" .subsection 2\n"
"2: ldub [%1], %0\n"
" brnz,pt %0, 2b\n"
" membar #LoadLoad\n"
" brnz,pt %0, 2b\n"
" nop\n"
" ba,a,pt %%xcc, 1b\n"
" .previous"
: "=&r" (tmp)
......@@ -95,14 +97,16 @@ static inline void _raw_spin_lock_flags(spinlock_t *lock, unsigned long flags)
__asm__ __volatile__(
"1: ldstub [%2], %0\n"
" brnz,pn %0, 2f\n"
" membar #StoreLoad | #StoreStore\n"
" brnz,pn %0, 2f\n"
" nop\n"
" .subsection 2\n"
"2: rdpr %%pil, %1\n"
" wrpr %3, %%pil\n"
"3: ldub [%2], %0\n"
" brnz,pt %0, 3b\n"
" membar #LoadLoad\n"
" brnz,pt %0, 3b\n"
" nop\n"
" ba,pt %%xcc, 1b\n"
" wrpr %1, %%pil\n"
" .previous"
......@@ -162,12 +166,14 @@ static void inline __read_lock(rwlock_t *lock)
"4: add %0, 1, %1\n"
" cas [%2], %0, %1\n"
" cmp %0, %1\n"
" bne,pn %%icc, 1b\n"
" membar #StoreLoad | #StoreStore\n"
" bne,pn %%icc, 1b\n"
" nop\n"
" .subsection 2\n"
"2: ldsw [%2], %0\n"
" brlz,pt %0, 2b\n"
" membar #LoadLoad\n"
" brlz,pt %0, 2b\n"
" nop\n"
" ba,a,pt %%xcc, 4b\n"
" .previous"
: "=&r" (tmp1), "=&r" (tmp2)
......@@ -204,12 +210,14 @@ static void inline __write_lock(rwlock_t *lock)
"4: or %0, %3, %1\n"
" cas [%2], %0, %1\n"
" cmp %0, %1\n"
" bne,pn %%icc, 1b\n"
" membar #StoreLoad | #StoreStore\n"
" bne,pn %%icc, 1b\n"
" nop\n"
" .subsection 2\n"
"2: lduw [%2], %0\n"
" brnz,pt %0, 2b\n"
" membar #LoadLoad\n"
" brnz,pt %0, 2b\n"
" nop\n"
" ba,a,pt %%xcc, 4b\n"
" .previous"
: "=&r" (tmp1), "=&r" (tmp2)
......@@ -240,8 +248,9 @@ static int inline __write_trylock(rwlock_t *lock)
" or %0, %4, %1\n"
" cas [%3], %0, %1\n"
" cmp %0, %1\n"
" bne,pn %%icc, 1b\n"
" membar #StoreLoad | #StoreStore\n"
" bne,pn %%icc, 1b\n"
" nop\n"
" mov 1, %2\n"
"2:"
: "=&r" (tmp1), "=&r" (tmp2), "=&r" (result)
......
......@@ -111,7 +111,6 @@ static __inline__ void spitfire_put_dcache_tag(unsigned long addr, unsigned long
"membar #Sync"
: /* No outputs */
: "r" (tag), "r" (addr), "i" (ASI_DCACHE_TAG));
__asm__ __volatile__ ("membar #Sync" : : : "memory");
}
/* The instruction cache lines are flushed with this, but note that
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment