Merge tag 'docs-5.9-3' of git://git.lwn.net/linux

Pull documentation fixes from Jonathan Corbet:
 "A handful of documentation fixes for 5.9"

* tag 'docs-5.9-3' of git://git.lwn.net/linux:
  Documentation: laptops: thinkpad-acpi: fix underline length build warning
  Documentation: fix typo for abituguru documentation
  docs: Fix function name trailing double-()s
  devices.txt: fix typo of "ubd" as "udb"
  Documentation: add riscv entry in list of existing profiles
  MAINTAINERS: mention documentation maintainer entry profile
  Fpga: Documentation: Replace deprecated :c:func: Usage
  IIO: Documentation: Replace deprecated :c:func: Usage
  Documentation/locking/locktypes: fix local_locks documentation

Documentation/RCU/lockdep.rst

@@ -49,7 +49,7 @@ checking of rcu_dereference() primitives:
 		is invoked by both RCU-sched readers and updaters.
 	srcu_dereference_check(p, c):
 		Use explicit check expression "c" along with
-		srcu_read_lock_held()().  This is useful in code that
+		srcu_read_lock_held().  This is useful in code that
 		is invoked by both SRCU readers and updaters.
 	rcu_dereference_raw(p):
 		Don't check.  (Use sparingly, if at all.)

Documentation/admin-guide/devices.txt

@@ -1662,7 +1662,7 @@
 
   98 block	User-mode virtual block device
 		  0 = /dev/ubda		First user-mode block device
-		 16 = /dev/udbb		Second user-mode block device
+		 16 = /dev/ubdb		Second user-mode block device
 		    ...
 
 		Partitions are handled in the same way as for IDE

Documentation/admin-guide/laptops/thinkpad-acpi.rst

@@ -1434,7 +1434,7 @@ on the feature, restricting the viewing angles.
 
 
 DYTC Lapmode sensor
-------------------
+-------------------
 
 sysfs: dytc_lapmode
 

Documentation/driver-api/fpga/fpga-bridge.rst

@@ -6,9 +6,9 @@ API to implement a new FPGA bridge
 
 * struct :c:type:`fpga_bridge` — The FPGA Bridge structure
 * struct :c:type:`fpga_bridge_ops` — Low level Bridge driver ops
-* :c:func:`devm_fpga_bridge_create()` — Allocate and init a bridge struct
-* :c:func:`fpga_bridge_register()` — Register a bridge
-* :c:func:`fpga_bridge_unregister()` — Unregister a bridge
+* devm_fpga_bridge_create() — Allocate and init a bridge struct
+* fpga_bridge_register() — Register a bridge
+* fpga_bridge_unregister() — Unregister a bridge
 
 .. kernel-doc:: include/linux/fpga/fpga-bridge.h
    :functions: fpga_bridge

Documentation/driver-api/fpga/fpga-mgr.rst

@@ -104,9 +104,9 @@ API for implementing a new FPGA Manager driver
 * ``fpga_mgr_states`` —  Values for :c:member:`fpga_manager->state`.
 * struct :c:type:`fpga_manager` —  the FPGA manager struct
 * struct :c:type:`fpga_manager_ops` —  Low level FPGA manager driver ops
-* :c:func:`devm_fpga_mgr_create` —  Allocate and init a manager struct
-* :c:func:`fpga_mgr_register` —  Register an FPGA manager
-* :c:func:`fpga_mgr_unregister` —  Unregister an FPGA manager
+* devm_fpga_mgr_create() —  Allocate and init a manager struct
+* fpga_mgr_register() —  Register an FPGA manager
+* fpga_mgr_unregister() —  Unregister an FPGA manager
 
 .. kernel-doc:: include/linux/fpga/fpga-mgr.h
    :functions: fpga_mgr_states

Documentation/driver-api/fpga/fpga-programming.rst

@@ -6,9 +6,9 @@ Overview
 
 The in-kernel API for FPGA programming is a combination of APIs from
 FPGA manager, bridge, and regions.  The actual function used to
-trigger FPGA programming is :c:func:`fpga_region_program_fpga()`.
+trigger FPGA programming is fpga_region_program_fpga().
 
-:c:func:`fpga_region_program_fpga()` uses functionality supplied by
+fpga_region_program_fpga() uses functionality supplied by
 the FPGA manager and bridges.  It will:
 
  * lock the region's mutex
@@ -20,8 +20,8 @@ the FPGA manager and bridges.  It will:
  * release the locks
 
 The struct fpga_image_info specifies what FPGA image to program.  It is
-allocated/freed by :c:func:`fpga_image_info_alloc()` and freed with
-:c:func:`fpga_image_info_free()`
+allocated/freed by fpga_image_info_alloc() and freed with
+fpga_image_info_free()
 
 How to program an FPGA using a region
 -------------------------------------
@@ -84,10 +84,10 @@ will generate that list.  Here's some sample code of what to do next::
 API for programming an FPGA
 ---------------------------
 
-* :c:func:`fpga_region_program_fpga` —  Program an FPGA
-* :c:type:`fpga_image_info` —  Specifies what FPGA image to program
-* :c:func:`fpga_image_info_alloc()` —  Allocate an FPGA image info struct
-* :c:func:`fpga_image_info_free()` —  Free an FPGA image info struct
+* fpga_region_program_fpga() —  Program an FPGA
+* fpga_image_info() —  Specifies what FPGA image to program
+* fpga_image_info_alloc() —  Allocate an FPGA image info struct
+* fpga_image_info_free() —  Free an FPGA image info struct
 
 .. kernel-doc:: drivers/fpga/fpga-region.c
    :functions: fpga_region_program_fpga

Documentation/driver-api/fpga/fpga-region.rst

@@ -46,18 +46,18 @@ API to add a new FPGA region
 ----------------------------
 
 * struct :c:type:`fpga_region` — The FPGA region struct
-* :c:func:`devm_fpga_region_create` — Allocate and init a region struct
-* :c:func:`fpga_region_register` —  Register an FPGA region
-* :c:func:`fpga_region_unregister` —  Unregister an FPGA region
+* devm_fpga_region_create() — Allocate and init a region struct
+* fpga_region_register() —  Register an FPGA region
+* fpga_region_unregister() —  Unregister an FPGA region
 
 The FPGA region's probe function will need to get a reference to the FPGA
 Manager it will be using to do the programming.  This usually would happen
 during the region's probe function.
 
-* :c:func:`fpga_mgr_get` — Get a reference to an FPGA manager, raise ref count
-* :c:func:`of_fpga_mgr_get` —  Get a reference to an FPGA manager, raise ref count,
+* fpga_mgr_get() — Get a reference to an FPGA manager, raise ref count
+* of_fpga_mgr_get() —  Get a reference to an FPGA manager, raise ref count,
   given a device node.
-* :c:func:`fpga_mgr_put` — Put an FPGA manager
+* fpga_mgr_put() — Put an FPGA manager
 
 The FPGA region will need to specify which bridges to control while programming
 the FPGA.  The region driver can build a list of bridges during probe time
@@ -66,11 +66,11 @@ the list of bridges to program just before programming
 (:c:member:`fpga_region->get_bridges`).  The FPGA bridge framework supplies the
 following APIs to handle building or tearing down that list.
 
-* :c:func:`fpga_bridge_get_to_list` — Get a ref of an FPGA bridge, add it to a
+* fpga_bridge_get_to_list() — Get a ref of an FPGA bridge, add it to a
   list
-* :c:func:`of_fpga_bridge_get_to_list` — Get a ref of an FPGA bridge, add it to a
+* of_fpga_bridge_get_to_list() — Get a ref of an FPGA bridge, add it to a
   list, given a device node
-* :c:func:`fpga_bridges_put` — Given a list of bridges, put them
+* fpga_bridges_put() — Given a list of bridges, put them
 
 .. kernel-doc:: include/linux/fpga/fpga-region.h
    :functions: fpga_region

Documentation/driver-api/iio/core.rst

@@ -11,10 +11,10 @@ Industrial I/O Devices
 ----------------------
 
 * struct :c:type:`iio_dev` - industrial I/O device
-* :c:func:`iio_device_alloc()` - allocate an :c:type:`iio_dev` from a driver
-* :c:func:`iio_device_free()` - free an :c:type:`iio_dev` from a driver
-* :c:func:`iio_device_register()` - register a device with the IIO subsystem
-* :c:func:`iio_device_unregister()` - unregister a device from the IIO
+* iio_device_alloc() - allocate an :c:type:`iio_dev` from a driver
+* iio_device_free() - free an :c:type:`iio_dev` from a driver
+* iio_device_register() - register a device with the IIO subsystem
+* iio_device_unregister() - unregister a device from the IIO
   subsystem
 
 An IIO device usually corresponds to a single hardware sensor and it
@@ -34,17 +34,17 @@ A typical IIO driver will register itself as an :doc:`I2C <../i2c>` or
 
 At probe:
 
-1. Call :c:func:`iio_device_alloc()`, which allocates memory for an IIO device.
+1. Call iio_device_alloc(), which allocates memory for an IIO device.
 2. Initialize IIO device fields with driver specific information (e.g.
    device name, device channels).
-3. Call :c:func:`iio_device_register()`, this registers the device with the
+3. Call iio_device_register(), this registers the device with the
    IIO core. After this call the device is ready to accept requests from user
    space applications.
 
 At remove, we free the resources allocated in probe in reverse order:
 
-1. :c:func:`iio_device_unregister()`, unregister the device from the IIO core.
-2. :c:func:`iio_device_free()`, free the memory allocated for the IIO device.
+1. iio_device_unregister(), unregister the device from the IIO core.
+2. iio_device_free(), free the memory allocated for the IIO device.
 
 IIO device sysfs interface
 ==========================

Documentation/hwmon/abituguru-datasheet.rst

@@ -68,7 +68,7 @@ See below for all known bank addresses, numbers of sensors in that bank,
 number of bytes data per sensor and contents/meaning of those bytes.
 
 Although both this document and the kernel driver have kept the sensor
-terminoligy for the addressing within a bank this is not 100% correct, in
+terminology for the addressing within a bank this is not 100% correct, in
 bank 0x24 for example the addressing within the bank selects a PWM output not
 a sensor.
 
@@ -155,7 +155,7 @@ After wider testing of the Linux kernel driver some variants of the uGuru have
 turned up which do not hold 0x08 at DATA within 250 reads after writing the
 bank address. With these versions this happens quite frequent, using larger
 timeouts doesn't help, they just go offline for a second or 2, doing some
-internal callibration or whatever. Your code should be prepared to handle
+internal calibration or whatever. Your code should be prepared to handle
 this and in case of no response in this specific case just goto sleep for a
 while and then retry.
 
@@ -331,6 +331,6 @@ the voltage / clock programming out, I tried reading and only reading banks
 0-0x30 with the reading code used for the sensor banks (0x20-0x28) and this
 resulted in a _permanent_ reprogramming of the voltages, luckily I had the
 sensors part configured so that it would shutdown my system on any out of spec
-voltages which proprably safed my computer (after a reboot I managed to
+voltages which probably safed my computer (after a reboot I managed to
 immediately enter the bios and reload the defaults). This probably means that
 the read/write cycle for the non sensor part is different from the sensor part.

Documentation/hwmon/abituguru.rst

@@ -17,7 +17,7 @@ Supported chips:
     Note:
 	The uGuru is a microcontroller with onboard firmware which programs
 	it to behave as a hwmon IC. There are many different revisions of the
-	firmware and thus effectivly many different revisions of the uGuru.
+	firmware and thus effectively many different revisions of the uGuru.
 	Below is an incomplete list with which revisions are used for which
 	Motherboards:
 
@@ -33,7 +33,7 @@ Supported chips:
 	sensortype (Volt or Temp) for bank1 sensors, for revision 1 uGuru's
 	this does not always work. For these uGuru's the autodetection can
 	be overridden with the bank1_types module param. For all 3 known
-	revison 1 motherboards the correct use of this param is:
+	revision 1 motherboards the correct use of this param is:
 	bank1_types=1,1,0,0,0,0,0,2,0,0,0,0,2,0,0,1
 	You may also need to specify the fan_sensors option for these boards
 	fan_sensors=5

Documentation/hwmon/abituguru3.rst

@@ -13,7 +13,7 @@ Supported chips:
     Note:
 	The uGuru is a microcontroller with onboard firmware which programs
 	it to behave as a hwmon IC. There are many different revisions of the
-	firmware and thus effectivly many different revisions of the uGuru.
+	firmware and thus effectively many different revisions of the uGuru.
 	Below is an incomplete list with which revisions are used for which
 	Motherboards:
 
@@ -24,7 +24,7 @@ Supported chips:
 	- uGuru 3.0.0.0 ~ 3.0.x.x (AW8, AL8, AT8, NI8 SLI, AT8 32X, AN8 32X,
 	  AW9D-MAX)
 
-	The abituguru3 driver is only for revison 3.0.x.x motherboards,
+	The abituguru3 driver is only for revision 3.0.x.x motherboards,
 	this driver will not work on older motherboards. For older
 	motherboards use the abituguru (without the 3 !) driver.
 

Documentation/locking/locktypes.rst

@@ -164,14 +164,14 @@ by disabling preemption or interrupts.
 On non-PREEMPT_RT kernels local_lock operations map to the preemption and
 interrupt disabling and enabling primitives:
 
- =========================== ======================
+ ===============================  ======================
  local_lock(&llock)               preempt_disable()
  local_unlock(&llock)             preempt_enable()
  local_lock_irq(&llock)           local_irq_disable()
  local_unlock_irq(&llock)         local_irq_enable()
- local_lock_save(&llock)     local_irq_save()
- local_lock_restore(&llock)  local_irq_save()
- =========================== ======================
+ local_lock_irqsave(&llock)       local_irq_save()
+ local_unlock_irqrestore(&llock)  local_irq_restore()
+ ===============================  ======================
 
 The named scope of local_lock has two advantages over the regular
 primitives:
@@ -353,14 +353,14 @@ protection scope. So the following substitution is wrong::
   {
     local_irq_save(flags);    -> local_lock_irqsave(&local_lock_1, flags);
     func3();
-    local_irq_restore(flags); -> local_lock_irqrestore(&local_lock_1, flags);
+    local_irq_restore(flags); -> local_unlock_irqrestore(&local_lock_1, flags);
   }
 
   func2()
   {
     local_irq_save(flags);    -> local_lock_irqsave(&local_lock_2, flags);
     func3();
-    local_irq_restore(flags); -> local_lock_irqrestore(&local_lock_2, flags);
+    local_irq_restore(flags); -> local_unlock_irqrestore(&local_lock_2, flags);
   }
 
   func3()
@@ -379,14 +379,14 @@ PREEMPT_RT-specific semantics of spinlock_t. The correct substitution is::
   {
     local_irq_save(flags);    -> local_lock_irqsave(&local_lock, flags);
     func3();
-    local_irq_restore(flags); -> local_lock_irqrestore(&local_lock, flags);
+    local_irq_restore(flags); -> local_unlock_irqrestore(&local_lock, flags);
   }
 
   func2()
   {
     local_irq_save(flags);    -> local_lock_irqsave(&local_lock, flags);
     func3();
-    local_irq_restore(flags); -> local_lock_irqrestore(&local_lock, flags);
+    local_irq_restore(flags); -> local_unlock_irqrestore(&local_lock, flags);
   }
 
   func3()

Documentation/maintainer/maintainer-entry-profile.rst

@@ -101,3 +101,4 @@ to do something different in the near future.
 
    ../doc-guide/maintainer-profile
    ../nvdimm/maintainer-entry-profile
+   ../riscv/patch-acceptance

Documentation/process/deprecated.rst

@@ -142,7 +142,7 @@ only NUL-terminated strings. The safe replacement is strscpy().
 (Users of strscpy() still needing NUL-padding should instead
 use strscpy_pad().)
 
-If a caller is using non-NUL-terminated strings, strncpy()() can
+If a caller is using non-NUL-terminated strings, strncpy() can
 still be used, but destinations should be marked with the `__nonstring
 <https://gcc.gnu.org/onlinedocs/gcc/Common-Variable-Attributes.html>`_
 attribute to avoid future compiler warnings.

Documentation/translations/it_IT/process/deprecated.rst

@@ -130,7 +130,7 @@ chi usa solo stringe terminate. La versione sicura da usare è
 strscpy(). (chi usa strscpy() e necessita di estendere la
 terminazione con NUL deve aggiungere una chiamata a memset())
 
-Se il chiamate no usa stringhe terminate con NUL, allore strncpy()()
+Se il chiamate no usa stringhe terminate con NUL, allore strncpy()
 può continuare ad essere usata, ma i buffer di destinazione devono essere
 marchiati con l'attributo `__nonstring <https://gcc.gnu.org/onlinedocs/gcc/Common-Variable-Attributes.html>`_
 per evitare avvisi durante la compilazione.

MAINTAINERS

@@ -5240,6 +5240,7 @@ DOCUMENTATION
 M:	Jonathan Corbet <corbet@lwn.net>
 L:	linux-doc@vger.kernel.org
 S:	Maintained
+P:	Documentation/doc-guide/maintainer-profile.rst
 T:	git git://git.lwn.net/linux.git docs-next
 F:	Documentation/
 F:	scripts/documentation-file-ref-check