[POWERPC] CPM: Rename commproc to cpm1 and cpm2_common.c to cpm2.c

Rename commproc.[ch] to cpm1.[ch] to be more consistent with cpm2. Also
rename cpm2_common.c to cpm2.c as suggested by Scott Wood. Adjust the
includes accordingly.
Signed-off-by: Jochen Friedrich <jochen@scram.de>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

arch/powerpc/platforms/8xx/ep88xc.c

@@ -16,6 +16,7 @@
 #include <asm/io.h>
 #include <asm/udbg.h>
 #include <asm/commproc.h>
+#include <asm/cpm1.h>
 
 #include "mpc8xx.h"
 

arch/powerpc/platforms/8xx/mpc86xads_setup.c

@@ -22,7 +22,7 @@
 #include <asm/system.h>
 #include <asm/time.h>
 #include <asm/8xx_immap.h>
-#include <asm/commproc.h>
+#include <asm/cpm1.h>
 #include <asm/fs_pd.h>
 #include <asm/udbg.h>
 

arch/powerpc/platforms/8xx/mpc885ads_setup.c

@@ -36,7 +36,7 @@
 #include <asm/time.h>
 #include <asm/mpc8xx.h>
 #include <asm/8xx_immap.h>
-#include <asm/commproc.h>
+#include <asm/cpm1.h>
 #include <asm/fs_pd.h>
 #include <asm/udbg.h>
 

arch/powerpc/sysdev/Makefile

@@ -37,8 +37,8 @@ endif
 # Temporary hack until we have migrated to asm-powerpc
 ifeq ($(ARCH),powerpc)
 obj-$(CONFIG_CPM)		+= cpm_common.o
-obj-$(CONFIG_CPM2)		+= cpm2_common.o cpm2_pic.o
+obj-$(CONFIG_CPM2)		+= cpm2.o cpm2_pic.o
 obj-$(CONFIG_PPC_DCR)		+= dcr.o
-obj-$(CONFIG_8xx)		+= mpc8xx_pic.o commproc.o
+obj-$(CONFIG_8xx)		+= mpc8xx_pic.o cpm1.o
 obj-$(CONFIG_UCODE_PATCH)	+= micropatch.o
 endif

arch/powerpc/sysdev/commproc.c → arch/powerpc/sysdev/cpm1.c

@@ -33,7 +33,7 @@
 #include <asm/page.h>
 #include <asm/pgtable.h>
 #include <asm/8xx_immap.h>
-#include <asm/commproc.h>
+#include <asm/cpm1.h>
 #include <asm/io.h>
 #include <asm/tlbflush.h>
 #include <asm/rheap.h>

arch/powerpc/sysdev/cpm2_common.c → arch/powerpc/sysdev/cpm2.c

@@ -153,8 +153,7 @@ cpm2_fastbrg(uint brg, uint rate, int div16)
 
 	if (brg < 4) {
 		bp = cpm2_map_size(im_brgc1, 16);
-	}
-	else {
+	} else {
 		bp = cpm2_map_size(im_brgc5, 16);
 		brg -= 4;
 	}

arch/powerpc/sysdev/micropatch.c

@@ -16,7 +16,7 @@
 #include <asm/page.h>
 #include <asm/pgtable.h>
 #include <asm/8xx_immap.h>
-#include <asm/commproc.h>
+#include <asm/cpm1.h>
 
 /*
  * I2C/SPI relocation patch arrays.

arch/ppc/8260_io/enet.c

@@ -10,7 +10,7 @@
  * This version of the driver is somewhat selectable for the different
  * processor/board combinations.  It works for the boards I know about
  * now, and should be easily modified to include others.  Some of the
- * configuration information is contained in <asm/commproc.h> and the
+ * configuration information is contained in <asm/cpm1.h> and the
  * remainder is here.
  *
  * Buffer descriptors are kept in the CPM dual port RAM, and the frame

arch/ppc/8xx_io/commproc.c

@@ -34,7 +34,7 @@
 #include <asm/page.h>
 #include <asm/pgtable.h>
 #include <asm/8xx_immap.h>
-#include <asm/commproc.h>
+#include <asm/cpm1.h>
 #include <asm/io.h>
 #include <asm/tlbflush.h>
 #include <asm/rheap.h>

arch/ppc/8xx_io/enet.c

@@ -8,7 +8,7 @@
  * This version of the driver is somewhat selectable for the different
  * processor/board combinations.  It works for the boards I know about
  * now, and should be easily modified to include others.  Some of the
- * configuration information is contained in <asm/commproc.h> and the
+ * configuration information is contained in <asm/cpm1.h> and the
  * remainder is here.
  *
  * Buffer descriptors are kept in the CPM dual port RAM, and the frame
@@ -43,7 +43,7 @@
 #include <asm/pgtable.h>
 #include <asm/mpc8xx.h>
 #include <asm/uaccess.h>
-#include <asm/commproc.h>
+#include <asm/cpm1.h>
 #include <asm/cacheflush.h>
 
 /*
@@ -80,7 +80,7 @@
  * programming documents for details unique to your board.
  *
  * For the TQM8xx(L) modules, there is no control register interface.
- * All functions are directly controlled using I/O pins.  See <asm/commproc.h>.
+ * All functions are directly controlled using I/O pins.  See <asm/cpm1.h>.
  */
 
 /* The transmitter timeout

arch/ppc/8xx_io/fec.c

@@ -53,7 +53,7 @@
 #include <asm/mpc8xx.h>
 #include <asm/irq.h>
 #include <asm/uaccess.h>
-#include <asm/commproc.h>
+#include <asm/cpm1.h>
 
 #ifdef	CONFIG_USE_MDIO
 /* Forward declarations of some structures to support different PHYs

arch/ppc/8xx_io/micropatch.c

@@ -16,7 +16,7 @@
 #include <asm/page.h>
 #include <asm/pgtable.h>
 #include <asm/8xx_immap.h>
-#include <asm/commproc.h>
+#include <asm/cpm1.h>
 
 /*
  * I2C/SPI relocation patch arrays.

arch/ppc/boot/simple/iic.c

@@ -5,7 +5,7 @@
 #include <linux/types.h>
 #include <asm/uaccess.h>
 #include <asm/mpc8xx.h>
-#include <asm/commproc.h>
+#include <asm/cpm1.h>
 
 
 /* IIC functions.

arch/ppc/boot/simple/m8xx_tty.c

@@ -11,7 +11,7 @@
 #include <linux/types.h>
 #include <asm/uaccess.h>
 #include <asm/mpc8xx.h>
-#include <asm/commproc.h>
+#include <asm/cpm1.h>
 
 #ifdef CONFIG_MBX
 #define MBX_CSR1	((volatile u_char *)0xfa100000)

arch/ppc/kernel/ppc_ksyms.c

@@ -45,7 +45,7 @@
 #include <asm/dcr.h>
 
 #ifdef  CONFIG_8xx
-#include <asm/commproc.h>
+#include <asm/cpm1.h>
 #endif
 
 extern void transfer_to_handler(void);

arch/ppc/platforms/mpc866ads_setup.c

@@ -32,7 +32,7 @@
 #include <asm/time.h>
 #include <asm/ppcboot.h>
 #include <asm/8xx_immap.h>
-#include <asm/commproc.h>
+#include <asm/cpm1.h>
 #include <asm/ppc_sys.h>
 #include <asm/mpc8xx.h>
 

arch/ppc/platforms/mpc885ads_setup.c

@@ -31,7 +31,7 @@
 #include <asm/time.h>
 #include <asm/ppcboot.h>
 #include <asm/8xx_immap.h>
-#include <asm/commproc.h>
+#include <asm/cpm1.h>
 #include <asm/ppc_sys.h>
 
 extern unsigned char __res[];

arch/ppc/syslib/mpc8xx_devices.c

@@ -16,7 +16,7 @@
 #include <linux/device.h>
 #include <linux/serial_8250.h>
 #include <linux/mii.h>
-#include <asm/commproc.h>
+#include <asm/cpm1.h>
 #include <asm/mpc8xx.h>
 #include <asm/irq.h>
 #include <asm/ppc_sys.h>

arch/ppc/xmon/start_8xx.c

@@ -14,7 +14,7 @@
 #include <linux/kernel.h>
 #include <asm/8xx_immap.h>
 #include <asm/mpc8xx.h>
-#include <asm/commproc.h>
+#include <asm/cpm1.h>
 
 extern void xmon_printf(const char *fmt, ...);
 extern int xmon_8xx_write(char *str, int nb);

drivers/net/fec_8xx/fec_8xx-netta.c

@@ -26,7 +26,7 @@
 #include <asm/mpc8xx.h>
 #include <asm/irq.h>
 #include <asm/uaccess.h>
-#include <asm/commproc.h>
+#include <asm/cpm1.h>
 
 #include "fec_8xx.h"
 

drivers/net/fec_8xx/fec_main.c

@@ -35,7 +35,7 @@
 #include <asm/mpc8xx.h>
 #include <asm/irq.h>
 #include <asm/uaccess.h>
-#include <asm/commproc.h>
+#include <asm/cpm1.h>
 
 #include "fec_8xx.h"
 

drivers/net/fec_8xx/fec_mii.c

@@ -34,7 +34,7 @@
 #include <asm/mpc8xx.h>
 #include <asm/irq.h>
 #include <asm/uaccess.h>
-#include <asm/commproc.h>
+#include <asm/cpm1.h>
 
 /*************************************************/
 

drivers/net/fs_enet/fs_enet.h

@@ -12,7 +12,7 @@
 #include <asm/fs_pd.h>
 
 #ifdef CONFIG_CPM1
-#include <asm/commproc.h>
+#include <asm/cpm1.h>
 
 struct fec_info {
 	fec_t __iomem *fecp;

drivers/net/fs_enet/mac-fec.c

@@ -40,7 +40,7 @@
 #include <asm/8xx_immap.h>
 #include <asm/pgtable.h>
 #include <asm/mpc8xx.h>
-#include <asm/commproc.h>
+#include <asm/cpm1.h>
 #endif
 
 #ifdef CONFIG_PPC_CPM_NEW_BINDING

drivers/net/fs_enet/mac-scc.c

@@ -40,7 +40,7 @@
 #include <asm/8xx_immap.h>
 #include <asm/pgtable.h>
 #include <asm/mpc8xx.h>
-#include <asm/commproc.h>
+#include <asm/cpm1.h>
 #endif
 
 #ifdef CONFIG_PPC_CPM_NEW_BINDING

drivers/serial/cpm_uart/cpm_uart_cpm1.h

@@ -10,7 +10,7 @@
 #ifndef CPM_UART_CPM1_H
 #define CPM_UART_CPM1_H
 
-#include <asm/commproc.h>
+#include <asm/cpm1.h>
 
 /* defines for IRQs */
 #ifndef CONFIG_PPC_CPM_NEW_BINDING

include/asm-powerpc/commproc.h → include/asm-powerpc/cpm1.h

@@ -14,8 +14,8 @@
  * IDMA1 space.  The remaining DP RAM is available for buffer descriptors
  * or other use.
  */
-#ifndef __CPM_8XX__
-#define __CPM_8XX__
+#ifndef __CPM1__
+#define __CPM1__
 
 #include <asm/8xx_immap.h>
 #include <asm/ptrace.h>
@@ -82,7 +82,7 @@ extern int cpm_dpfree(unsigned long offset);
 extern unsigned long cpm_dpalloc_fixed(unsigned long offset, uint size, uint align);
 extern void cpm_dpdump(void);
 extern void *cpm_dpram_addr(unsigned long offset);
-extern uint cpm_dpram_phys(u8* addr);
+extern uint cpm_dpram_phys(u8 *addr);
 #endif
 
 extern void cpm_setbrg(uint brg, uint rate);
@@ -747,4 +747,4 @@ enum cpm_clk {
 
 int cpm1_clk_setup(enum cpm_clk_target target, int clock, int mode);
 
-#endif /* __CPM_8XX__ */
+#endif /* __CPM1__ */

include/asm-ppc/commproc.h → include/asm-ppc/cpm1.h

@@ -14,8 +14,8 @@
  * IDMA1 space.  The remaining DP RAM is available for buffer descriptors
  * or other use.
  */
-#ifndef __CPM_8XX__
-#define __CPM_8XX__
+#ifndef __CPM1__
+#define __CPM1__
 
 #include <asm/8xx_immap.h>
 #include <asm/ptrace.h>
@@ -72,7 +72,7 @@ extern int cpm_dpfree(unsigned long offset);
 extern unsigned long cpm_dpalloc_fixed(unsigned long offset, uint size, uint align);
 extern void cpm_dpdump(void);
 extern void *cpm_dpram_addr(unsigned long offset);
-extern uint cpm_dpram_phys(u8* addr);
+extern uint cpm_dpram_phys(u8 *addr);
 extern void cpm_setbrg(uint brg, uint rate);
 
 extern void cpm_load_patch(volatile immap_t *immr);
@@ -685,4 +685,4 @@ typedef struct risc_timer_pram {
 extern void cpm_install_handler(int vec, void (*handler)(void *), void *dev_id);
 extern void cpm_free_handler(int vec);
 
-#endif /* __CPM_8XX__ */
+#endif /* __CPM1__ */