Merge branches 'clk-unisoc', 'clk-trivial', 'clk-bcm', 'clk-st' and 'clk-ast2600' into clk-next

* clk-unisoc:
  clk: sprd: add mipi_csi_xx gate clocks
  clk: sprd: add dt-bindings include for mipi_csi_xx clocks
  dt-bindings: clk: sprd: add mipi_csi_xx clocks for SC9863A
  clk: sprd: check its parent status before reading gate clock
  clk: sprd: return correct type of value for _sprd_pll_recalc_rate
  clk: sprd: mark the local clock symbols static

* clk-trivial:
  clk: versatile: remove redundant assignment to pointer clk
  clk: clk-xgene: Fix a typo in Kconfig
  clk: Remove unused inline function clk_debug_reparent

* clk-bcm:
  clk: bcm2835: Constify struct debugfs_reg32
  clk: bcm2835: Remove casting to bcm2835_clk_register
  clk: bcm2835: Fix return type of bcm2835_register_gate

* clk-st:
  clk: clk-flexgen: fix clock-critical handling

* clk-ast2600:
  clk: ast2600: Fix AHB clock divider for A1

Documentation/devicetree/bindings/clock/sprd,sc9863a-clk.yaml

@@ -28,6 +28,7 @@ properties:
       - sprd,sc9863a-rpll
       - sprd,sc9863a-dpll
       - sprd,sc9863a-mm-gate
+      - sprd,sc9863a-mm-clk
       - sprd,sc9863a-apapb-gate
 
   clocks:

drivers/clk/Kconfig

@@ -267,7 +267,7 @@ config COMMON_CLK_XGENE
 	default ARCH_XGENE
 	depends on ARM64 || COMPILE_TEST
 	---help---
-	  Sypport for the APM X-Gene SoC reference, PLL, and device clocks.
+	  Support for the APM X-Gene SoC reference, PLL, and device clocks.
 
 config COMMON_CLK_LOCHNAGAR
 	tristate "Cirrus Logic Lochnagar clock driver"

drivers/clk/bcm/clk-bcm2835.c

@@ -396,8 +396,8 @@ static unsigned long bcm2835_measure_tcnt_mux(struct bcm2835_cprman *cprman,
 }
 
 static void bcm2835_debugfs_regset(struct bcm2835_cprman *cprman, u32 base,
-				  struct debugfs_reg32 *regs, size_t nregs,
-				  struct dentry *dentry)
+				   const struct debugfs_reg32 *regs,
+				   size_t nregs, struct dentry *dentry)
 {
 	struct debugfs_regset32 *regset;
 
@@ -1240,7 +1240,7 @@ static u8 bcm2835_clock_get_parent(struct clk_hw *hw)
 	return (src & CM_SRC_MASK) >> CM_SRC_SHIFT;
 }
 
-static struct debugfs_reg32 bcm2835_debugfs_clock_reg32[] = {
+static const struct debugfs_reg32 bcm2835_debugfs_clock_reg32[] = {
 	{
 		.name = "ctl",
 		.offset = 0,
@@ -1296,8 +1296,9 @@ static const struct clk_ops bcm2835_vpu_clock_clk_ops = {
 };
 
 static struct clk_hw *bcm2835_register_pll(struct bcm2835_cprman *cprman,
-					   const struct bcm2835_pll_data *data)
+					   const void *data)
 {
+	const struct bcm2835_pll_data *pll_data = data;
 	struct bcm2835_pll *pll;
 	struct clk_init_data init;
 	int ret;
@@ -1307,7 +1308,7 @@ static struct clk_hw *bcm2835_register_pll(struct bcm2835_cprman *cprman,
 	/* All of the PLLs derive from the external oscillator. */
 	init.parent_names = &cprman->real_parent_names[0];
 	init.num_parents = 1;
-	init.name = data->name;
+	init.name = pll_data->name;
 	init.ops = &bcm2835_pll_clk_ops;
 	init.flags = CLK_IGNORE_UNUSED;
 
@@ -1316,7 +1317,7 @@ static struct clk_hw *bcm2835_register_pll(struct bcm2835_cprman *cprman,
 		return NULL;
 
 	pll->cprman = cprman;
-	pll->data = data;
+	pll->data = pll_data;
 	pll->hw.init = &init;
 
 	ret = devm_clk_hw_register(cprman->dev, &pll->hw);
@@ -1327,35 +1328,36 @@ static struct clk_hw *bcm2835_register_pll(struct bcm2835_cprman *cprman,
 
 static struct clk_hw *
 bcm2835_register_pll_divider(struct bcm2835_cprman *cprman,
-			     const struct bcm2835_pll_divider_data *data)
+			     const void *data)
 {
+	const struct bcm2835_pll_divider_data *divider_data = data;
 	struct bcm2835_pll_divider *divider;
 	struct clk_init_data init;
 	const char *divider_name;
 	int ret;
 
-	if (data->fixed_divider != 1) {
+	if (divider_data->fixed_divider != 1) {
 		divider_name = devm_kasprintf(cprman->dev, GFP_KERNEL,
-					      "%s_prediv", data->name);
+					      "%s_prediv", divider_data->name);
 		if (!divider_name)
 			return NULL;
 	} else {
-		divider_name = data->name;
+		divider_name = divider_data->name;
 	}
 
 	memset(&init, 0, sizeof(init));
 
-	init.parent_names = &data->source_pll;
+	init.parent_names = &divider_data->source_pll;
 	init.num_parents = 1;
 	init.name = divider_name;
 	init.ops = &bcm2835_pll_divider_clk_ops;
-	init.flags = data->flags | CLK_IGNORE_UNUSED;
+	init.flags = divider_data->flags | CLK_IGNORE_UNUSED;
 
 	divider = devm_kzalloc(cprman->dev, sizeof(*divider), GFP_KERNEL);
 	if (!divider)
 		return NULL;
 
-	divider->div.reg = cprman->regs + data->a2w_reg;
+	divider->div.reg = cprman->regs + divider_data->a2w_reg;
 	divider->div.shift = A2W_PLL_DIV_SHIFT;
 	divider->div.width = A2W_PLL_DIV_BITS;
 	divider->div.flags = CLK_DIVIDER_MAX_AT_ZERO;
@@ -1364,7 +1366,7 @@ bcm2835_register_pll_divider(struct bcm2835_cprman *cprman,
 	divider->div.table = NULL;
 
 	divider->cprman = cprman;
-	divider->data = data;
+	divider->data = divider_data;
 
 	ret = devm_clk_hw_register(cprman->dev, &divider->div.hw);
 	if (ret)
@@ -1374,20 +1376,22 @@ bcm2835_register_pll_divider(struct bcm2835_cprman *cprman,
 	 * PLLH's channels have a fixed divide by 10 afterwards, which
 	 * is what our consumers are actually using.
 	 */
-	if (data->fixed_divider != 1) {
-		return clk_hw_register_fixed_factor(cprman->dev, data->name,
+	if (divider_data->fixed_divider != 1) {
+		return clk_hw_register_fixed_factor(cprman->dev,
+						    divider_data->name,
 						    divider_name,
 						    CLK_SET_RATE_PARENT,
 						    1,
-						    data->fixed_divider);
+						    divider_data->fixed_divider);
 	}
 
 	return &divider->div.hw;
 }
 
 static struct clk_hw *bcm2835_register_clock(struct bcm2835_cprman *cprman,
-					  const struct bcm2835_clock_data *data)
+					     const void *data)
 {
+	const struct bcm2835_clock_data *clock_data = data;
 	struct bcm2835_clock *clock;
 	struct clk_init_data init;
 	const char *parents[1 << CM_SRC_BITS];
@@ -1398,8 +1402,8 @@ static struct clk_hw *bcm2835_register_clock(struct bcm2835_cprman *cprman,
 	 * Replace our strings referencing parent clocks with the
 	 * actual clock-output-name of the parent.
 	 */
-	for (i = 0; i < data->num_mux_parents; i++) {
-		parents[i] = data->parents[i];
+	for (i = 0; i < clock_data->num_mux_parents; i++) {
+		parents[i] = clock_data->parents[i];
 
 		ret = match_string(cprman_parent_names,
 				   ARRAY_SIZE(cprman_parent_names),
@@ -1410,18 +1414,18 @@ static struct clk_hw *bcm2835_register_clock(struct bcm2835_cprman *cprman,
 
 	memset(&init, 0, sizeof(init));
 	init.parent_names = parents;
-	init.num_parents = data->num_mux_parents;
-	init.name = data->name;
-	init.flags = data->flags | CLK_IGNORE_UNUSED;
+	init.num_parents = clock_data->num_mux_parents;
+	init.name = clock_data->name;
+	init.flags = clock_data->flags | CLK_IGNORE_UNUSED;
 
 	/*
 	 * Pass the CLK_SET_RATE_PARENT flag if we are allowed to propagate
 	 * rate changes on at least of the parents.
 	 */
-	if (data->set_rate_parent)
+	if (clock_data->set_rate_parent)
 		init.flags |= CLK_SET_RATE_PARENT;
 
-	if (data->is_vpu_clock) {
+	if (clock_data->is_vpu_clock) {
 		init.ops = &bcm2835_vpu_clock_clk_ops;
 	} else {
 		init.ops = &bcm2835_clock_clk_ops;
@@ -1430,7 +1434,7 @@ static struct clk_hw *bcm2835_register_clock(struct bcm2835_cprman *cprman,
 		/* If the clock wasn't actually enabled at boot, it's not
 		 * critical.
 		 */
-		if (!(cprman_read(cprman, data->ctl_reg) & CM_ENABLE))
+		if (!(cprman_read(cprman, clock_data->ctl_reg) & CM_ENABLE))
 			init.flags &= ~CLK_IS_CRITICAL;
 	}
 
@@ -1439,7 +1443,7 @@ static struct clk_hw *bcm2835_register_clock(struct bcm2835_cprman *cprman,
 		return NULL;
 
 	clock->cprman = cprman;
-	clock->data = data;
+	clock->data = clock_data;
 	clock->hw.init = &init;
 
 	ret = devm_clk_hw_register(cprman->dev, &clock->hw);
@@ -1448,25 +1452,27 @@ static struct clk_hw *bcm2835_register_clock(struct bcm2835_cprman *cprman,
 	return &clock->hw;
 }
 
-static struct clk *bcm2835_register_gate(struct bcm2835_cprman *cprman,
-					 const struct bcm2835_gate_data *data)
+static struct clk_hw *bcm2835_register_gate(struct bcm2835_cprman *cprman,
+					    const void *data)
 {
-	return clk_register_gate(cprman->dev, data->name, data->parent,
+	const struct bcm2835_gate_data *gate_data = data;
+
+	return clk_hw_register_gate(cprman->dev, gate_data->name,
+				    gate_data->parent,
 				    CLK_IGNORE_UNUSED | CLK_SET_RATE_GATE,
-				 cprman->regs + data->ctl_reg,
+				    cprman->regs + gate_data->ctl_reg,
 				    CM_GATE_BIT, 0, &cprman->regs_lock);
 }
 
-typedef struct clk_hw *(*bcm2835_clk_register)(struct bcm2835_cprman *cprman,
-					       const void *data);
 struct bcm2835_clk_desc {
-	bcm2835_clk_register clk_register;
+	struct clk_hw *(*clk_register)(struct bcm2835_cprman *cprman,
+				       const void *data);
 	unsigned int supported;
 	const void *data;
 };
 
 /* assignment helper macros for different clock types */
-#define _REGISTER(f, s, ...) { .clk_register = (bcm2835_clk_register)f, \
+#define _REGISTER(f, s, ...) { .clk_register = f, \
 			       .supported = s,				\
 			       .data = __VA_ARGS__ }
 #define REGISTER_PLL(s, ...)	_REGISTER(&bcm2835_register_pll,	\

drivers/clk/clk-ast2600.c

@@ -642,14 +642,22 @@ static const u32 ast2600_a0_axi_ahb_div_table[] = {
 	2, 2, 3, 5,
 };
 
-static const u32 ast2600_a1_axi_ahb_div_table[] = {
-	4, 6, 2, 4,
+static const u32 ast2600_a1_axi_ahb_div0_tbl[] = {
+	3, 2, 3, 4,
+};
+
+static const u32 ast2600_a1_axi_ahb_div1_tbl[] = {
+	3, 4, 6, 8,
+};
+
+static const u32 ast2600_a1_axi_ahb200_tbl[] = {
+	3, 4, 3, 4, 2, 2, 2, 2,
 };
 
 static void __init aspeed_g6_cc(struct regmap *map)
 {
 	struct clk_hw *hw;
-	u32 val, div, chip_id, axi_div, ahb_div;
+	u32 val, div, divbits, chip_id, axi_div, ahb_div;
 
 	clk_hw_register_fixed_rate(NULL, "clkin", NULL, 0, 25000000);
 
@@ -679,11 +687,22 @@ static void __init aspeed_g6_cc(struct regmap *map)
 	else
 		axi_div = 2;
 
+	divbits = (val >> 11) & 0x3;
 	regmap_read(map, ASPEED_G6_SILICON_REV, &chip_id);
-	if (chip_id & BIT(16))
-		ahb_div = ast2600_a1_axi_ahb_div_table[(val >> 11) & 0x3];
+	if (chip_id & BIT(16)) {
+		if (!divbits) {
+			ahb_div = ast2600_a1_axi_ahb200_tbl[(val >> 8) & 0x3];
+			if (val & BIT(16))
+				ahb_div *= 2;
+		} else {
+			if (val & BIT(16))
+				ahb_div = ast2600_a1_axi_ahb_div1_tbl[divbits];
 			else
+				ahb_div = ast2600_a1_axi_ahb_div0_tbl[divbits];
+		}
+	} else {
 		ahb_div = ast2600_a0_axi_ahb_div_table[(val >> 11) & 0x3];
+	}
 
 	hw = clk_hw_register_fixed_factor(NULL, "ahb", "hpll", 0, 1, axi_div * ahb_div);
 	aspeed_g6_clk_data->hws[ASPEED_CLK_AHB] = hw;

drivers/clk/clk.c

@@ -3295,10 +3295,6 @@ static int __init clk_debug_init(void)
 late_initcall(clk_debug_init);
 #else
 static inline void clk_debug_register(struct clk_core *core) { }
-static inline void clk_debug_reparent(struct clk_core *core,
-				      struct clk_core *new_parent)
-{
-}
 static inline void clk_debug_unregister(struct clk_core *core)
 {
 }

drivers/clk/sprd/gate.c

@@ -94,8 +94,15 @@ static int sprd_gate_is_enabled(struct clk_hw *hw)
 {
 	struct sprd_gate *sg = hw_to_sprd_gate(hw);
 	struct sprd_clk_common *common = &sg->common;
+	struct clk_hw *parent;
 	unsigned int reg;
 
+	if (sg->flags & SPRD_GATE_NON_AON) {
+		parent = clk_hw_get_parent(hw);
+		if (!parent || !clk_hw_is_enabled(parent))
+			return 0;
+	}
+
 	regmap_read(common->regmap, common->reg, &reg);
 
 	if (sg->flags & CLK_GATE_SET_TO_DISABLE)

drivers/clk/sprd/gate.h

@@ -19,6 +19,15 @@ struct sprd_gate {
 	struct sprd_clk_common	common;
 };
 
+/*
+ * sprd_gate->flags is used for:
+ * CLK_GATE_SET_TO_DISABLE	BIT(0)
+ * CLK_GATE_HIWORD_MASK		BIT(1)
+ * CLK_GATE_BIG_ENDIAN		BIT(2)
+ * so we define new flags from	BIT(3)
+ */
+#define SPRD_GATE_NON_AON BIT(3) /* not alway powered on, check before read */
+
 #define SPRD_SC_GATE_CLK_HW_INIT_FN(_struct, _name, _parent, _reg,	\
 				    _sc_offset, _enable_mask, _flags,	\
 				    _gate_flags, _udelay, _ops, _fn)	\

drivers/clk/sprd/pll.c

@@ -106,7 +106,7 @@ static unsigned long _sprd_pll_recalc_rate(const struct sprd_pll *pll,
 
 	cfg = kcalloc(regs_num, sizeof(*cfg), GFP_KERNEL);
 	if (!cfg)
-		return -ENOMEM;
+		return parent_rate;
 
 	for (i = 0; i < regs_num; i++)
 		cfg[i] = sprd_pll_read(pll, i);

drivers/clk/sprd/sc9863a-clk.c

@@ -23,22 +23,22 @@
 #include "pll.h"
 
 /* mpll*_gate clocks control cpu cores, they were enabled by default */
-SPRD_PLL_SC_GATE_CLK_FW_NAME(mpll0_gate, "mpll0-gate", "ext-26m", 0x94,
+static SPRD_PLL_SC_GATE_CLK_FW_NAME(mpll0_gate, "mpll0-gate", "ext-26m", 0x94,
 				    0x1000, BIT(0), CLK_IGNORE_UNUSED, 0, 240);
-SPRD_PLL_SC_GATE_CLK_FW_NAME(dpll0_gate, "dpll0-gate", "ext-26m", 0x98,
+static SPRD_PLL_SC_GATE_CLK_FW_NAME(dpll0_gate, "dpll0-gate", "ext-26m", 0x98,
 				    0x1000, BIT(0), 0, 0, 240);
-SPRD_PLL_SC_GATE_CLK_FW_NAME(lpll_gate, "lpll-gate", "ext-26m", 0x9c,
+static SPRD_PLL_SC_GATE_CLK_FW_NAME(lpll_gate, "lpll-gate", "ext-26m", 0x9c,
 				    0x1000, BIT(0), 0, 0, 240);
-SPRD_PLL_SC_GATE_CLK_FW_NAME(gpll_gate, "gpll-gate", "ext-26m", 0xa8,
+static SPRD_PLL_SC_GATE_CLK_FW_NAME(gpll_gate, "gpll-gate", "ext-26m", 0xa8,
 				    0x1000, BIT(0), 0, 0, 240);
-SPRD_PLL_SC_GATE_CLK_FW_NAME(dpll1_gate, "dpll1-gate", "ext-26m", 0x1dc,
+static SPRD_PLL_SC_GATE_CLK_FW_NAME(dpll1_gate, "dpll1-gate", "ext-26m", 0x1dc,
 				    0x1000, BIT(0), 0, 0, 240);
-SPRD_PLL_SC_GATE_CLK_FW_NAME(mpll1_gate, "mpll1-gate", "ext-26m", 0x1e0,
+static SPRD_PLL_SC_GATE_CLK_FW_NAME(mpll1_gate, "mpll1-gate", "ext-26m", 0x1e0,
 				    0x1000, BIT(0), CLK_IGNORE_UNUSED, 0, 240);
-SPRD_PLL_SC_GATE_CLK_FW_NAME(mpll2_gate, "mpll2-gate", "ext-26m", 0x1e4,
+static SPRD_PLL_SC_GATE_CLK_FW_NAME(mpll2_gate, "mpll2-gate", "ext-26m", 0x1e4,
 				    0x1000, BIT(0), CLK_IGNORE_UNUSED, 0, 240);
-SPRD_PLL_SC_GATE_CLK_FW_NAME(isppll_gate, "isppll-gate", "ext-26m", 0x1e8,
-			     0x1000, BIT(0), 0, 0, 240);
+static SPRD_PLL_SC_GATE_CLK_FW_NAME(isppll_gate, "isppll-gate", "ext-26m",
+				    0x1e8, 0x1000, BIT(0), 0, 0, 240);
 
 static struct sprd_clk_common *sc9863a_pmu_gate_clks[] = {
 	/* address base is 0x402b0000 */
@@ -1615,6 +1615,36 @@ static const struct sprd_clk_desc sc9863a_mm_gate_desc = {
 	.hw_clks	= &sc9863a_mm_gate_hws,
 };
 
+/* camera sensor clocks */
+static SPRD_GATE_CLK_HW(mipi_csi_clk, "mipi-csi-clk", &mahb_ckg_eb.common.hw,
+			0x20, BIT(16), 0, SPRD_GATE_NON_AON);
+static SPRD_GATE_CLK_HW(mipi_csi_s_clk, "mipi-csi-s-clk", &mahb_ckg_eb.common.hw,
+			0x24, BIT(16), 0, SPRD_GATE_NON_AON);
+static SPRD_GATE_CLK_HW(mipi_csi_m_clk, "mipi-csi-m-clk", &mahb_ckg_eb.common.hw,
+			0x28, BIT(16), 0, SPRD_GATE_NON_AON);
+
+static struct sprd_clk_common *sc9863a_mm_clk_clks[] = {
+	/* address base is 0x60900000 */
+	&mipi_csi_clk.common,
+	&mipi_csi_s_clk.common,
+	&mipi_csi_m_clk.common,
+};
+
+static struct clk_hw_onecell_data sc9863a_mm_clk_hws = {
+	.hws	= {
+		[CLK_MIPI_CSI]		= &mipi_csi_clk.common.hw,
+		[CLK_MIPI_CSI_S]	= &mipi_csi_s_clk.common.hw,
+		[CLK_MIPI_CSI_M]	= &mipi_csi_m_clk.common.hw,
+	},
+	.num	= CLK_MM_CLK_NUM,
+};
+
+static const struct sprd_clk_desc sc9863a_mm_clk_desc = {
+	.clk_clks	= sc9863a_mm_clk_clks,
+	.num_clk_clks	= ARRAY_SIZE(sc9863a_mm_clk_clks),
+	.hw_clks	= &sc9863a_mm_clk_hws,
+};
+
 static SPRD_SC_GATE_CLK_FW_NAME(sim0_eb,	"sim0-eb",	"ext-26m", 0x0,
 				0x1000, BIT(0), 0, 0);
 static SPRD_SC_GATE_CLK_FW_NAME(iis0_eb,	"iis0-eb",	"ext-26m", 0x0,
@@ -1737,6 +1767,8 @@ static const struct of_device_id sprd_sc9863a_clk_ids[] = {
 	  .data = &sc9863a_aonapb_gate_desc },
 	{ .compatible = "sprd,sc9863a-mm-gate",	/* 0x60800000 */
 	  .data = &sc9863a_mm_gate_desc },
+	{ .compatible = "sprd,sc9863a-mm-clk",	/* 0x60900000 */
+	  .data = &sc9863a_mm_clk_desc },
 	{ .compatible = "sprd,sc9863a-apapb-gate",	/* 0x71300000 */
 	  .data = &sc9863a_apapb_gate_desc },
 	{ }

drivers/clk/st/clk-flexgen.c

@@ -375,6 +375,7 @@ static void __init st_of_flexgen_setup(struct device_node *np)
 			break;
 		}
 
+		flex_flags &= ~CLK_IS_CRITICAL;
 		of_clk_detect_critical(np, i, &flex_flags);
 
 		/*

drivers/clk/versatile/clk-versatile.c

@@ -56,7 +56,7 @@ static const struct clk_icst_desc versatile_auxosc_desc __initconst = {
 static void __init cm_osc_setup(struct device_node *np,
 				const struct clk_icst_desc *desc)
 {
-	struct clk *clk = ERR_PTR(-EINVAL);
+	struct clk *clk;
 	const char *clk_name = np->name;
 	const char *parent_name;
 

include/dt-bindings/clock/sprd,sc9863a-clk.h

@@ -308,6 +308,11 @@
 #define CLK_MCPHY_CFG_EB	14
 #define CLK_MM_GATE_NUM		(CLK_MCPHY_CFG_EB + 1)
 
+#define CLK_MIPI_CSI		0
+#define CLK_MIPI_CSI_S		1
+#define CLK_MIPI_CSI_M		2
+#define CLK_MM_CLK_NUM		(CLK_MIPI_CSI_M + 1)
+
 #define CLK_SIM0_EB		0
 #define CLK_IIS0_EB		1
 #define CLK_IIS1_EB		2