Commit b7a24a7d authored by Lucas Stach's avatar Lucas Stach Committed by Shawn Guo

dt-bindings: add multidomain support to i.MX GPC DT binding

This adds a new binding for the Freescale i.MX GPC block, which allows
to describe multiple power domains in a more natural way. The driver
will continue to support the old binding for existing DTBs, but new
features like the additional domains present on i.MX6SX will only be
usable with the new binding.
Signed-off-by: default avatarLucas Stach <l.stach@pengutronix.de>
Acked-by: default avatarRob Herring <robh@kernel.org>
Signed-off-by: default avatarShawn Guo <shawnguo@kernel.org>
parent c1ae3cfa
Freescale i.MX General Power Controller
=======================================
The i.MX6Q General Power Control (GPC) block contains DVFS load tracking
counters and Power Gating Control (PGC) for the CPU and PU (GPU/VPU) power
domains.
The i.MX6 General Power Control (GPC) block contains DVFS load tracking
counters and Power Gating Control (PGC).
Required properties:
- compatible: Should be "fsl,imx6q-gpc" or "fsl,imx6sl-gpc"
- reg: should be register base and length as documented in the
datasheet
- interrupts: Should contain GPC interrupt request 1
- pu-supply: Link to the LDO regulator powering the PU power domain
- clocks: Clock phandles to devices in the PU power domain that need
to be enabled during domain power-up for reset propagation.
- #power-domain-cells: Should be 1, see below:
- interrupts: Should contain one interrupt specifier for the GPC interrupt
- clocks: Must contain an entry for each entry in clock-names.
See Documentation/devicetree/bindings/clocks/clock-bindings.txt for details.
- clock-names: Must include the following entries:
- ipg
The gpc node is a power-controller as documented by the generic power domain
bindings in Documentation/devicetree/bindings/power/power_domain.txt.
The power domains are generic power domain providers as documented in
Documentation/devicetree/bindings/power/power_domain.txt. They are described as
subnodes of the power gating controller 'pgc' node of the GPC and should
contain the following:
Required properties:
- reg: the DOMAIN_INDEX as used by the client devices to refer to this
power domain
The following DOMAIN_INDEX values are valid for i.MX6Q:
ARM_DOMAIN 0
PU_DOMAIN 1
The following additional DOMAIN_INDEX value is valid for i.MX6SL:
DISPLAY_DOMAIN 2
- #power-domain-cells: Should be 0
Optional properties:
- clocks: a number of phandles to clocks that need to be enabled during domain
power-up sequencing to ensure reset propagation into devices located inside
this power domain
- power-supply: a phandle to the regulator powering this domain
Example:
......@@ -25,14 +43,29 @@ Example:
reg = <0x020dc000 0x4000>;
interrupts = <0 89 IRQ_TYPE_LEVEL_HIGH>,
<0 90 IRQ_TYPE_LEVEL_HIGH>;
pu-supply = <&reg_pu>;
clocks = <&clks IMX6QDL_CLK_IPG>;
clock-names = "ipg";
pgc {
#address-cells = <1>;
#size-cells = <0>;
power-domain@0 {
reg = <0>;
#power-domain-cells = <0>;
};
pd_pu: power-domain@1 {
reg = <1>;
#power-domain-cells = <0>;
power-supply = <&reg_pu>;
clocks = <&clks IMX6QDL_CLK_GPU3D_CORE>,
<&clks IMX6QDL_CLK_GPU3D_SHADER>,
<&clks IMX6QDL_CLK_GPU2D_CORE>,
<&clks IMX6QDL_CLK_GPU2D_AXI>,
<&clks IMX6QDL_CLK_OPENVG_AXI>,
<&clks IMX6QDL_CLK_VPU_AXI>;
#power-domain-cells = <1>;
};
};
};
......@@ -40,20 +73,13 @@ Specifying power domain for IP modules
======================================
IP cores belonging to a power domain should contain a 'power-domains' property
that is a phandle pointing to the gpc device node and a DOMAIN_INDEX specifying
the power domain the device belongs to.
that is a phandle pointing to the power domain the device belongs to.
Example of a device that is part of the PU power domain:
vpu: vpu@02040000 {
reg = <0x02040000 0x3c000>;
/* ... */
power-domains = <&gpc 1>;
power-domains = <&pd_pu>;
/* ... */
};
The following DOMAIN_INDEX values are valid for i.MX6Q:
ARM_DOMAIN 0
PU_DOMAIN 1
The following additional DOMAIN_INDEX value is valid for i.MX6SL:
DISPLAY_DOMAIN 2
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment