Merge branch 'for_linus' of git://cavan.codon.org.uk/platform-drivers-x86

Pull x86 platform drivers update from Matthew Garrett:
 "Nothing amazingly special here.  Some cleanups, a new driver to
  support a single button on some new HPs, a tiny amount of hardware
  enablement"

* 'for_linus' of git://cavan.codon.org.uk/platform-drivers-x86:
  ipc: add intel-mid's pci id macros
  hp-wireless: new driver for hp wireless button for Windows 8
  toshiba_acpi: Support RFKILL hotkey scancode
  hp_accel: Add a new PnP ID HPQ6007 for new HP laptops
  sony-laptop: remove unnecessary assigment of len
  fujitsu-laptop: fix error return code
  dell-laptop: Only install the i8042 filter when rfkill is active
  X86 platform: New BayTrail IOSF-SB MBI driver
  drivers: platform: Include appropriate header file in mxm-wmi.c
  drivers: platform: Mark functions as static in hp_accel.c
  dell-laptop: rkill whitelist Precision models
  ipc: simplify platform data approach
  asus-wmi: Convert to use devm_hwmon_device_register_with_groups
  compal-laptop: Use devm_hwmon_device_register_with_groups
  compal-laptop: Replace SENSOR_DEVICE_ATTR with DEVICE_ATTR
  eeepc-laptop: Convert to use devm_hwmon_device_register_with_groups
  compal-laptop: Use devm_kzalloc to allocate local data structure
  dell-laptop: fix to return error code in dell_send_intensity()

drivers/platform/x86/Kconfig

@@ -197,6 +197,17 @@ config HP_ACCEL
 	  To compile this driver as a module, choose M here: the module will
 	  be called hp_accel.
 
+config HP_WIRELESS
+	tristate "HP WIRELESS"
+	depends on ACPI
+	depends on INPUT
+	help
+	 This driver provides supports for new HP wireless button for Windows 8.
+	 On such systems the driver should load automatically (via ACPI alias).
+
+	 To compile this driver as a module, choose M here: the module will
+	 be called hp-wireless.
+
 config HP_WMI
 	tristate "HP WMI extras"
 	depends on ACPI_WMI
@@ -808,4 +819,12 @@ config PVPANIC
 	  a paravirtualized device provided by QEMU; it lets a virtual machine
 	  (guest) communicate panic events to the host.
 
+config INTEL_BAYTRAIL_MBI
+	tristate
+	depends on PCI
+	---help---
+	  Needed on Baytrail platforms for access to the IOSF Sideband Mailbox
+	  Interface. This is a requirement for systems that need to configure
+	  the PUNIT for power management features such as RAPL.
+
 endif # X86_PLATFORM_DEVICES

drivers/platform/x86/Makefile

@@ -16,6 +16,7 @@ obj-$(CONFIG_DELL_WMI_AIO)	+= dell-wmi-aio.o
 obj-$(CONFIG_ACER_WMI)		+= acer-wmi.o
 obj-$(CONFIG_ACERHDF)		+= acerhdf.o
 obj-$(CONFIG_HP_ACCEL)		+= hp_accel.o
+obj-$(CONFIG_HP_WIRELESS)	+= hp-wireless.o
 obj-$(CONFIG_HP_WMI)		+= hp-wmi.o
 obj-$(CONFIG_AMILO_RFKILL)	+= amilo-rfkill.o
 obj-$(CONFIG_TC1100_WMI)	+= tc1100-wmi.o
@@ -54,3 +55,4 @@ obj-$(CONFIG_INTEL_RST)		+= intel-rst.o
 obj-$(CONFIG_INTEL_SMARTCONNECT)	+= intel-smartconnect.o
 
 obj-$(CONFIG_PVPANIC)           += pvpanic.o
+obj-$(CONFIG_INTEL_BAYTRAIL_MBI)	+= intel_baytrail.o

drivers/platform/x86/asus-wmi.c

@@ -183,7 +183,6 @@ struct asus_wmi {
 
 	struct input_dev *inputdev;
 	struct backlight_device *backlight_device;
-	struct device *hwmon_device;
 	struct platform_device *platform_device;
 
 	struct led_classdev wlan_led;
@@ -1072,20 +1071,12 @@ static ssize_t asus_hwmon_temp1(struct device *dev,
 	return sprintf(buf, "%d\n", value);
 }
 
-static SENSOR_DEVICE_ATTR(pwm1, S_IRUGO, asus_hwmon_pwm1, NULL, 0);
-static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, asus_hwmon_temp1, NULL, 0);
-
-static ssize_t
-show_name(struct device *dev, struct device_attribute *attr, char *buf)
-{
-	return sprintf(buf, "asus\n");
-}
-static SENSOR_DEVICE_ATTR(name, S_IRUGO, show_name, NULL, 0);
+static DEVICE_ATTR(pwm1, S_IRUGO, asus_hwmon_pwm1, NULL);
+static DEVICE_ATTR(temp1_input, S_IRUGO, asus_hwmon_temp1, NULL);
 
 static struct attribute *hwmon_attributes[] = {
-	&sensor_dev_attr_pwm1.dev_attr.attr,
-	&sensor_dev_attr_temp1_input.dev_attr.attr,
-	&sensor_dev_attr_name.dev_attr.attr,
+	&dev_attr_pwm1.attr,
+	&dev_attr_temp1_input.attr,
 	NULL
 };
 
@@ -1099,9 +1090,9 @@ static umode_t asus_hwmon_sysfs_is_visible(struct kobject *kobj,
 	int dev_id = -1;
 	u32 value = ASUS_WMI_UNSUPPORTED_METHOD;
 
-	if (attr == &sensor_dev_attr_pwm1.dev_attr.attr)
+	if (attr == &dev_attr_pwm1.attr)
 		dev_id = ASUS_WMI_DEVID_FAN_CTRL;
-	else if (attr == &sensor_dev_attr_temp1_input.dev_attr.attr)
+	else if (attr == &dev_attr_temp1_input.attr)
 		dev_id = ASUS_WMI_DEVID_THERMAL_CTRL;
 
 	if (dev_id != -1) {
@@ -1136,35 +1127,20 @@ static struct attribute_group hwmon_attribute_group = {
 	.is_visible = asus_hwmon_sysfs_is_visible,
 	.attrs = hwmon_attributes
 };
-
-static void asus_wmi_hwmon_exit(struct asus_wmi *asus)
-{
-	struct device *hwmon;
-
-	hwmon = asus->hwmon_device;
-	if (!hwmon)
-		return;
-	sysfs_remove_group(&hwmon->kobj, &hwmon_attribute_group);
-	hwmon_device_unregister(hwmon);
-	asus->hwmon_device = NULL;
-}
+__ATTRIBUTE_GROUPS(hwmon_attribute);
 
 static int asus_wmi_hwmon_init(struct asus_wmi *asus)
 {
 	struct device *hwmon;
-	int result;
 
-	hwmon = hwmon_device_register(&asus->platform_device->dev);
+	hwmon = hwmon_device_register_with_groups(&asus->platform_device->dev,
+						  "asus", asus,
+						  hwmon_attribute_groups);
 	if (IS_ERR(hwmon)) {
 		pr_err("Could not register asus hwmon device\n");
 		return PTR_ERR(hwmon);
 	}
-	dev_set_drvdata(hwmon, asus);
-	asus->hwmon_device = hwmon;
-	result = sysfs_create_group(&hwmon->kobj, &hwmon_attribute_group);
-	if (result)
-		asus_wmi_hwmon_exit(asus);
-	return result;
+	return 0;
 }
 
 /*
@@ -1835,7 +1811,6 @@ static int asus_wmi_add(struct platform_device *pdev)
 fail_rfkill:
 	asus_wmi_led_exit(asus);
 fail_leds:
-	asus_wmi_hwmon_exit(asus);
 fail_hwmon:
 	asus_wmi_input_exit(asus);
 fail_input:
@@ -1853,7 +1828,6 @@ static int asus_wmi_remove(struct platform_device *device)
 	wmi_remove_notify_handler(asus->driver->event_guid);
 	asus_wmi_backlight_exit(asus);
 	asus_wmi_input_exit(asus);
-	asus_wmi_hwmon_exit(asus);
 	asus_wmi_led_exit(asus);
 	asus_wmi_rfkill_exit(asus);
 	asus_wmi_debugfs_exit(asus);

drivers/platform/x86/compal-laptop.c

@@ -173,8 +173,7 @@
 /* ======= */
 struct compal_data{
 	/* Fan control */
-	struct device *hwmon_dev;
-	int pwm_enable; /* 0:full on, 1:set by pwm1, 2:control by moterboard */
+	int pwm_enable; /* 0:full on, 1:set by pwm1, 2:control by motherboard */
 	unsigned char curr_pwm;
 
 	/* Power supply */
@@ -402,15 +401,6 @@ SIMPLE_MASKED_STORE_SHOW(wake_up_wlan,	WAKE_UP_ADDR, WAKE_UP_WLAN)
 SIMPLE_MASKED_STORE_SHOW(wake_up_key,	WAKE_UP_ADDR, WAKE_UP_KEY)
 SIMPLE_MASKED_STORE_SHOW(wake_up_mouse,	WAKE_UP_ADDR, WAKE_UP_MOUSE)
 
-
-/* General hwmon interface */
-static ssize_t hwmon_name_show(struct device *dev,
-		struct device_attribute *attr, char *buf)
-{
-	return sprintf(buf, "%s\n", DRIVER_NAME);
-}
-
-
 /* Fan control interface */
 static ssize_t pwm_enable_show(struct device *dev,
 		struct device_attribute *attr, char *buf)
@@ -665,55 +655,55 @@ static DEVICE_ATTR(wake_up_key,
 static DEVICE_ATTR(wake_up_mouse,
 		0644, wake_up_mouse_show,	wake_up_mouse_store);
 
-static SENSOR_DEVICE_ATTR(name,        S_IRUGO, hwmon_name_show,   NULL, 1);
-static SENSOR_DEVICE_ATTR(fan1_input,  S_IRUGO, fan_show,          NULL, 1);
-static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, temp_cpu,          NULL, 1);
-static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, temp_cpu_local,    NULL, 1);
-static SENSOR_DEVICE_ATTR(temp3_input, S_IRUGO, temp_cpu_DTS,      NULL, 1);
-static SENSOR_DEVICE_ATTR(temp4_input, S_IRUGO, temp_northbridge,  NULL, 1);
-static SENSOR_DEVICE_ATTR(temp5_input, S_IRUGO, temp_vga,          NULL, 1);
-static SENSOR_DEVICE_ATTR(temp6_input, S_IRUGO, temp_SKIN,         NULL, 1);
-static SENSOR_DEVICE_ATTR(temp1_label, S_IRUGO, label_cpu,         NULL, 1);
-static SENSOR_DEVICE_ATTR(temp2_label, S_IRUGO, label_cpu_local,   NULL, 1);
-static SENSOR_DEVICE_ATTR(temp3_label, S_IRUGO, label_cpu_DTS,     NULL, 1);
-static SENSOR_DEVICE_ATTR(temp4_label, S_IRUGO, label_northbridge, NULL, 1);
-static SENSOR_DEVICE_ATTR(temp5_label, S_IRUGO, label_vga,         NULL, 1);
-static SENSOR_DEVICE_ATTR(temp6_label, S_IRUGO, label_SKIN,        NULL, 1);
-static SENSOR_DEVICE_ATTR(pwm1, S_IRUGO | S_IWUSR, pwm_show, pwm_store, 1);
-static SENSOR_DEVICE_ATTR(pwm1_enable,
-		S_IRUGO | S_IWUSR, pwm_enable_show, pwm_enable_store, 0);
-
-static struct attribute *compal_attributes[] = {
+static DEVICE_ATTR(fan1_input,  S_IRUGO, fan_show,          NULL);
+static DEVICE_ATTR(temp1_input, S_IRUGO, temp_cpu,          NULL);
+static DEVICE_ATTR(temp2_input, S_IRUGO, temp_cpu_local,    NULL);
+static DEVICE_ATTR(temp3_input, S_IRUGO, temp_cpu_DTS,      NULL);
+static DEVICE_ATTR(temp4_input, S_IRUGO, temp_northbridge,  NULL);
+static DEVICE_ATTR(temp5_input, S_IRUGO, temp_vga,          NULL);
+static DEVICE_ATTR(temp6_input, S_IRUGO, temp_SKIN,         NULL);
+static DEVICE_ATTR(temp1_label, S_IRUGO, label_cpu,         NULL);
+static DEVICE_ATTR(temp2_label, S_IRUGO, label_cpu_local,   NULL);
+static DEVICE_ATTR(temp3_label, S_IRUGO, label_cpu_DTS,     NULL);
+static DEVICE_ATTR(temp4_label, S_IRUGO, label_northbridge, NULL);
+static DEVICE_ATTR(temp5_label, S_IRUGO, label_vga,         NULL);
+static DEVICE_ATTR(temp6_label, S_IRUGO, label_SKIN,        NULL);
+static DEVICE_ATTR(pwm1, S_IRUGO | S_IWUSR, pwm_show, pwm_store);
+static DEVICE_ATTR(pwm1_enable,
+		   S_IRUGO | S_IWUSR, pwm_enable_show, pwm_enable_store);
+
+static struct attribute *compal_platform_attrs[] = {
 	&dev_attr_wake_up_pme.attr,
 	&dev_attr_wake_up_modem.attr,
 	&dev_attr_wake_up_lan.attr,
 	&dev_attr_wake_up_wlan.attr,
 	&dev_attr_wake_up_key.attr,
 	&dev_attr_wake_up_mouse.attr,
-	/* Maybe put the sensor-stuff in a separate hwmon-driver? That way,
-	 * the hwmon sysfs won't be cluttered with the above files. */
-	&sensor_dev_attr_name.dev_attr.attr,
-	&sensor_dev_attr_pwm1_enable.dev_attr.attr,
-	&sensor_dev_attr_pwm1.dev_attr.attr,
-	&sensor_dev_attr_fan1_input.dev_attr.attr,
-	&sensor_dev_attr_temp1_input.dev_attr.attr,
-	&sensor_dev_attr_temp2_input.dev_attr.attr,
-	&sensor_dev_attr_temp3_input.dev_attr.attr,
-	&sensor_dev_attr_temp4_input.dev_attr.attr,
-	&sensor_dev_attr_temp5_input.dev_attr.attr,
-	&sensor_dev_attr_temp6_input.dev_attr.attr,
-	&sensor_dev_attr_temp1_label.dev_attr.attr,
-	&sensor_dev_attr_temp2_label.dev_attr.attr,
-	&sensor_dev_attr_temp3_label.dev_attr.attr,
-	&sensor_dev_attr_temp4_label.dev_attr.attr,
-	&sensor_dev_attr_temp5_label.dev_attr.attr,
-	&sensor_dev_attr_temp6_label.dev_attr.attr,
 	NULL
 };
+static struct attribute_group compal_platform_attr_group = {
+	.attrs = compal_platform_attrs
+};
 
-static struct attribute_group compal_attribute_group = {
-	.attrs = compal_attributes
+static struct attribute *compal_hwmon_attrs[] = {
+	&dev_attr_pwm1_enable.attr,
+	&dev_attr_pwm1.attr,
+	&dev_attr_fan1_input.attr,
+	&dev_attr_temp1_input.attr,
+	&dev_attr_temp2_input.attr,
+	&dev_attr_temp3_input.attr,
+	&dev_attr_temp4_input.attr,
+	&dev_attr_temp5_input.attr,
+	&dev_attr_temp6_input.attr,
+	&dev_attr_temp1_label.attr,
+	&dev_attr_temp2_label.attr,
+	&dev_attr_temp3_label.attr,
+	&dev_attr_temp4_label.attr,
+	&dev_attr_temp5_label.attr,
+	&dev_attr_temp6_label.attr,
+	NULL
 };
+ATTRIBUTE_GROUPS(compal_hwmon);
 
 static int compal_probe(struct platform_device *);
 static int compal_remove(struct platform_device *);
@@ -1021,30 +1011,28 @@ static int compal_probe(struct platform_device *pdev)
 {
 	int err;
 	struct compal_data *data;
+	struct device *hwmon_dev;
 
 	if (!extra_features)
 		return 0;
 
 	/* Fan control */
-	data = kzalloc(sizeof(struct compal_data), GFP_KERNEL);
+	data = devm_kzalloc(&pdev->dev, sizeof(struct compal_data), GFP_KERNEL);
 	if (!data)
 		return -ENOMEM;
 
 	initialize_fan_control_data(data);
 
-	err = sysfs_create_group(&pdev->dev.kobj, &compal_attribute_group);
-	if (err) {
-		kfree(data);
+	err = sysfs_create_group(&pdev->dev.kobj, &compal_platform_attr_group);
+	if (err)
 		return err;
-	}
 
-	data->hwmon_dev = hwmon_device_register(&pdev->dev);
-	if (IS_ERR(data->hwmon_dev)) {
-		err = PTR_ERR(data->hwmon_dev);
-		sysfs_remove_group(&pdev->dev.kobj,
-				&compal_attribute_group);
-		kfree(data);
-		return err;
+	hwmon_dev = hwmon_device_register_with_groups(&pdev->dev,
+						      DRIVER_NAME, data,
+						      compal_hwmon_groups);
+	if (IS_ERR(hwmon_dev)) {
+		err = PTR_ERR(hwmon_dev);
+		goto remove;
 	}
 
 	/* Power supply */
@@ -1054,6 +1042,10 @@ static int compal_probe(struct platform_device *pdev)
 	platform_set_drvdata(pdev, data);
 
 	return 0;
+
+remove:
+	sysfs_remove_group(&pdev->dev.kobj, &compal_platform_attr_group);
+	return err;
 }
 
 static void __exit compal_cleanup(void)
@@ -1080,12 +1072,9 @@ static int compal_remove(struct platform_device *pdev)
 	pwm_disable_control();
 
 	data = platform_get_drvdata(pdev);
-	hwmon_device_unregister(data->hwmon_dev);
 	power_supply_unregister(&data->psy);
 
-	kfree(data);
-
-	sysfs_remove_group(&pdev->dev.kobj, &compal_attribute_group);
+	sysfs_remove_group(&pdev->dev.kobj, &compal_platform_attr_group);
 
 	return 0;
 }

drivers/platform/x86/dell-laptop.c

@@ -559,19 +559,45 @@ static void dell_update_rfkill(struct work_struct *ignored)
 }
 static DECLARE_DELAYED_WORK(dell_rfkill_work, dell_update_rfkill);
 
+static bool dell_laptop_i8042_filter(unsigned char data, unsigned char str,
+			      struct serio *port)
+{
+	static bool extended;
+
+	if (str & 0x20)
+		return false;
+
+	if (unlikely(data == 0xe0)) {
+		extended = true;
+		return false;
+	} else if (unlikely(extended)) {
+		switch (data) {
+		case 0x8:
+			schedule_delayed_work(&dell_rfkill_work,
+					      round_jiffies_relative(HZ / 4));
+			break;
+		}
+		extended = false;
+	}
+
+	return false;
+}
 
 static int __init dell_setup_rfkill(void)
 {
-	int status;
-	int ret;
+	int status, ret, whitelisted;
 	const char *product;
 
 	/*
-	 * rfkill causes trouble on various non Latitudes, according to Dell
-	 * actually testing the rfkill functionality is only done on Latitudes.
+	 * rfkill support causes trouble on various models, mostly Inspirons.
+	 * So we whitelist certain series, and don't support rfkill on others.
 	 */
+	whitelisted = 0;
 	product = dmi_get_system_info(DMI_PRODUCT_NAME);
-	if (!force_rfkill && (!product || strncmp(product, "Latitude", 8)))
+	if (product &&  (strncmp(product, "Latitude", 8) == 0 ||
+			 strncmp(product, "Precision", 9) == 0))
+		whitelisted = 1;
+	if (!force_rfkill && !whitelisted)
 		return 0;
 
 	get_buffer();
@@ -633,7 +659,16 @@ static int __init dell_setup_rfkill(void)
 			goto err_wwan;
 	}
 
+	ret = i8042_install_filter(dell_laptop_i8042_filter);
+	if (ret) {
+		pr_warn("Unable to install key filter\n");
+		goto err_filter;
+	}
+
 	return 0;
+err_filter:
+	if (wwan_rfkill)
+		rfkill_unregister(wwan_rfkill);
 err_wwan:
 	rfkill_destroy(wwan_rfkill);
 	if (bluetooth_rfkill)
@@ -684,7 +719,7 @@ static int dell_send_intensity(struct backlight_device *bd)
 
 out:
 	release_buffer();
-	return 0;
+	return ret;
 }
 
 static int dell_get_intensity(struct backlight_device *bd)
@@ -755,30 +790,6 @@ static void touchpad_led_exit(void)
 	led_classdev_unregister(&touchpad_led);
 }
 
-static bool dell_laptop_i8042_filter(unsigned char data, unsigned char str,
-			      struct serio *port)
-{
-	static bool extended;
-
-	if (str & 0x20)
-		return false;
-
-	if (unlikely(data == 0xe0)) {
-		extended = true;
-		return false;
-	} else if (unlikely(extended)) {
-		switch (data) {
-		case 0x8:
-			schedule_delayed_work(&dell_rfkill_work,
-					      round_jiffies_relative(HZ / 4));
-			break;
-		}
-		extended = false;
-	}
-
-	return false;
-}
-
 static int __init dell_init(void)
 {
 	int max_intensity = 0;
@@ -828,12 +839,6 @@ static int __init dell_init(void)
 		goto fail_rfkill;
 	}
 
-	ret = i8042_install_filter(dell_laptop_i8042_filter);
-	if (ret) {
-		pr_warn("Unable to install key filter\n");
-		goto fail_filter;
-	}
-
 	if (quirks && quirks->touchpad_led)
 		touchpad_led_init(&platform_device->dev);
 
@@ -885,7 +890,6 @@ static int __init dell_init(void)
 fail_backlight:
 	i8042_remove_filter(dell_laptop_i8042_filter);
 	cancel_delayed_work_sync(&dell_rfkill_work);
-fail_filter:
 	dell_cleanup_rfkill();
 fail_rfkill:
 	free_page((unsigned long)bufferpage);

drivers/platform/x86/eeepc-laptop.c

@@ -165,7 +165,6 @@ struct eeepc_laptop {
 
 	struct platform_device *platform_device;
 	struct acpi_device *device;		/* the device we are in */
-	struct device *hwmon_device;
 	struct backlight_device *backlight_device;
 
 	struct input_dev *inputdev;
@@ -1068,7 +1067,7 @@ static ssize_t show_sys_hwmon(int (*get)(void), char *buf)
 	{								\
 		return store_sys_hwmon(_get, buf, count);		\
 	}								\
-	static SENSOR_DEVICE_ATTR(_name, _mode, show_##_name, store_##_name, 0);
+	static DEVICE_ATTR(_name, _mode, show_##_name, store_##_name);
 
 EEEPC_CREATE_SENSOR_ATTR(fan1_input, S_IRUGO, eeepc_get_fan_rpm, NULL);
 EEEPC_CREATE_SENSOR_ATTR(pwm1, S_IRUGO | S_IWUSR,
@@ -1076,55 +1075,26 @@ EEEPC_CREATE_SENSOR_ATTR(pwm1, S_IRUGO | S_IWUSR,
 EEEPC_CREATE_SENSOR_ATTR(pwm1_enable, S_IRUGO | S_IWUSR,
 			 eeepc_get_fan_ctrl, eeepc_set_fan_ctrl);
 
-static ssize_t
-show_name(struct device *dev, struct device_attribute *attr, char *buf)
-{
-	return sprintf(buf, "eeepc\n");
-}
-static SENSOR_DEVICE_ATTR(name, S_IRUGO, show_name, NULL, 0);
-
-static struct attribute *hwmon_attributes[] = {
-	&sensor_dev_attr_pwm1.dev_attr.attr,
-	&sensor_dev_attr_fan1_input.dev_attr.attr,
-	&sensor_dev_attr_pwm1_enable.dev_attr.attr,
-	&sensor_dev_attr_name.dev_attr.attr,
+static struct attribute *hwmon_attrs[] = {
+	&dev_attr_pwm1.attr,
+	&dev_attr_fan1_input.attr,
+	&dev_attr_pwm1_enable.attr,
 	NULL
 };
-
-static struct attribute_group hwmon_attribute_group = {
-	.attrs = hwmon_attributes
-};
-
-static void eeepc_hwmon_exit(struct eeepc_laptop *eeepc)
-{
-	struct device *hwmon;
-
-	hwmon = eeepc->hwmon_device;
-	if (!hwmon)
-		return;
-	sysfs_remove_group(&hwmon->kobj,
-			   &hwmon_attribute_group);
-	hwmon_device_unregister(hwmon);
-	eeepc->hwmon_device = NULL;
-}
+ATTRIBUTE_GROUPS(hwmon);
 
 static int eeepc_hwmon_init(struct eeepc_laptop *eeepc)
 {
+	struct device *dev = &eeepc->platform_device->dev;
 	struct device *hwmon;
-	int result;
 
-	hwmon = hwmon_device_register(&eeepc->platform_device->dev);
+	hwmon = devm_hwmon_device_register_with_groups(dev, "eeepc", NULL,
+						       hwmon_groups);
 	if (IS_ERR(hwmon)) {
 		pr_err("Could not register eeepc hwmon device\n");
-		eeepc->hwmon_device = NULL;
 		return PTR_ERR(hwmon);
 	}
-	eeepc->hwmon_device = hwmon;
-	result = sysfs_create_group(&hwmon->kobj,
-				    &hwmon_attribute_group);
-	if (result)
-		eeepc_hwmon_exit(eeepc);
-	return result;
+	return 0;
 }
 
 /*
@@ -1480,7 +1450,6 @@ static int eeepc_acpi_add(struct acpi_device *device)
 fail_rfkill:
 	eeepc_led_exit(eeepc);
 fail_led:
-	eeepc_hwmon_exit(eeepc);
 fail_hwmon:
 	eeepc_input_exit(eeepc);
 fail_input:
@@ -1500,7 +1469,6 @@ static int eeepc_acpi_remove(struct acpi_device *device)
 	eeepc_backlight_exit(eeepc);
 	eeepc_rfkill_exit(eeepc);
 	eeepc_input_exit(eeepc);
-	eeepc_hwmon_exit(eeepc);
 	eeepc_led_exit(eeepc);
 	eeepc_platform_exit(eeepc);
 

drivers/platform/x86/fujitsu-laptop.c

@@ -633,7 +633,6 @@ static struct dmi_system_id fujitsu_dmi_table[] = {
 
 static int acpi_fujitsu_add(struct acpi_device *device)
 {
-	int result = 0;
 	int state = 0;
 	struct input_dev *input;
 	int error;
@@ -669,8 +668,8 @@ static int acpi_fujitsu_add(struct acpi_device *device)
 	if (error)
 		goto err_free_input_dev;
 
-	result = acpi_bus_update_power(fujitsu->acpi_handle, &state);
-	if (result) {
+	error = acpi_bus_update_power(fujitsu->acpi_handle, &state);
+	if (error) {
 		pr_err("Error reading power state\n");
 		goto err_unregister_input_dev;
 	}
@@ -700,7 +699,7 @@ static int acpi_fujitsu_add(struct acpi_device *device)
 		fujitsu->max_brightness = FUJITSU_LCD_N_LEVELS;
 	get_lcd_level();
 
-	return result;
+	return 0;
 
 err_unregister_input_dev:
 	input_unregister_device(input);
@@ -708,7 +707,7 @@ static int acpi_fujitsu_add(struct acpi_device *device)
 err_free_input_dev:
 	input_free_device(input);
 err_stop:
-	return result;
+	return error;
 }
 
 static int acpi_fujitsu_remove(struct acpi_device *device)
@@ -831,8 +830,8 @@ static int acpi_fujitsu_hotkey_add(struct acpi_device *device)
 	if (error)
 		goto err_free_input_dev;
 
-	result = acpi_bus_update_power(fujitsu_hotkey->acpi_handle, &state);
-	if (result) {
+	error = acpi_bus_update_power(fujitsu_hotkey->acpi_handle, &state);
+	if (error) {
 		pr_err("Error reading power state\n");
 		goto err_unregister_input_dev;
 	}
@@ -907,7 +906,7 @@ static int acpi_fujitsu_hotkey_add(struct acpi_device *device)
 err_free_fifo:
 	kfifo_free(&fujitsu_hotkey->fifo);
 err_stop:
-	return result;
+	return error;
 }
 
 static int acpi_fujitsu_hotkey_remove(struct acpi_device *device)

drivers/platform/x86/hp-wireless.c

+/*
+ *  hp-wireless button for Windows 8
+ *
+ *  Copyright (C) 2014 Alex Hung <alex.hung@canonical.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/input.h>
+#include <linux/platform_device.h>
+#include <linux/acpi.h>
+#include <acpi/acpi_bus.h>
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Alex Hung");
+MODULE_ALIAS("acpi*:HPQ6001:*");
+
+static struct input_dev *hpwl_input_dev;
+
+static const struct acpi_device_id hpwl_ids[] = {
+	{"HPQ6001", 0},
+	{"", 0},
+};
+
+static int hp_wireless_input_setup(void)
+{
+	int err;
+
+	hpwl_input_dev = input_allocate_device();
+	if (!hpwl_input_dev)
+		return -ENOMEM;
+
+	hpwl_input_dev->name = "HP Wireless hotkeys";
+	hpwl_input_dev->phys = "hpq6001/input0";
+	hpwl_input_dev->id.bustype = BUS_HOST;
+	hpwl_input_dev->evbit[0] = BIT(EV_KEY);
+	set_bit(KEY_RFKILL, hpwl_input_dev->keybit);
+
+	err = input_register_device(hpwl_input_dev);
+	if (err)
+		goto err_free_dev;
+
+	return 0;
+
+err_free_dev:
+	input_free_device(hpwl_input_dev);
+	return err;
+}
+
+static void hp_wireless_input_destroy(void)
+{
+	input_unregister_device(hpwl_input_dev);
+}
+
+static void hpwl_notify(struct acpi_device *acpi_dev, u32 event)
+{
+	if (event != 0x80) {
+		pr_info("Received unknown event (0x%x)\n", event);
+		return;
+	}
+
+	input_report_key(hpwl_input_dev, KEY_RFKILL, 1);
+	input_sync(hpwl_input_dev);
+	input_report_key(hpwl_input_dev, KEY_RFKILL, 0);
+	input_sync(hpwl_input_dev);
+}
+
+static int hpwl_add(struct acpi_device *device)
+{
+	int err;
+
+	err = hp_wireless_input_setup();
+	return err;
+}
+
+static int hpwl_remove(struct acpi_device *device)
+{
+	hp_wireless_input_destroy();
+	return 0;
+}
+
+static struct acpi_driver hpwl_driver = {
+	.name	= "hp-wireless",
+	.owner	= THIS_MODULE,
+	.ids	= hpwl_ids,
+	.ops	= {
+		.add	= hpwl_add,
+		.remove	= hpwl_remove,
+		.notify	= hpwl_notify,
+	},
+};
+
+static int __init hpwl_init(void)
+{
+	int err;
+
+	pr_info("Initializing HPQ6001 module\n");
+	err = acpi_bus_register_driver(&hpwl_driver);
+	if (err) {
+		pr_err("Unable to register HP wireless control driver.\n");
+		goto error_acpi_register;
+	}
+
+	return 0;
+
+error_acpi_register:
+	return err;
+}
+
+static void __exit hpwl_exit(void)
+{
+	pr_info("Exiting HPQ6001 module\n");
+	acpi_bus_unregister_driver(&hpwl_driver);
+}
+
+module_init(hpwl_init);
+module_exit(hpwl_exit);

drivers/platform/x86/hp_accel.c

@@ -77,6 +77,7 @@ static inline void delayed_sysfs_set(struct led_classdev *led_cdev,
 static struct acpi_device_id lis3lv02d_device_ids[] = {
 	{"HPQ0004", 0}, /* HP Mobile Data Protection System PNP */
 	{"HPQ6000", 0}, /* HP Mobile Data Protection System PNP */
+	{"HPQ6007", 0}, /* HP Mobile Data Protection System PNP */
 	{"", 0},
 };
 MODULE_DEVICE_TABLE(acpi, lis3lv02d_device_ids);
@@ -88,7 +89,7 @@ MODULE_DEVICE_TABLE(acpi, lis3lv02d_device_ids);
  *
  * Returns 0 on success.
  */
-int lis3lv02d_acpi_init(struct lis3lv02d *lis3)
+static int lis3lv02d_acpi_init(struct lis3lv02d *lis3)
 {
 	struct acpi_device *dev = lis3->bus_priv;
 	if (acpi_evaluate_object(dev->handle, METHOD_NAME__INI,
@@ -106,7 +107,7 @@ int lis3lv02d_acpi_init(struct lis3lv02d *lis3)
  *
  * Returns 0 on success.
  */
-int lis3lv02d_acpi_read(struct lis3lv02d *lis3, int reg, u8 *ret)
+static int lis3lv02d_acpi_read(struct lis3lv02d *lis3, int reg, u8 *ret)
 {
 	struct acpi_device *dev = lis3->bus_priv;
 	union acpi_object arg0 = { ACPI_TYPE_INTEGER };
@@ -129,7 +130,7 @@ int lis3lv02d_acpi_read(struct lis3lv02d *lis3, int reg, u8 *ret)
  *
  * Returns 0 on success.
  */
-int lis3lv02d_acpi_write(struct lis3lv02d *lis3, int reg, u8 val)
+static int lis3lv02d_acpi_write(struct lis3lv02d *lis3, int reg, u8 val)
 {
 	struct acpi_device *dev = lis3->bus_priv;
 	unsigned long long ret; /* Not used when writting */

drivers/platform/x86/intel_baytrail.c

+/*
+ * Baytrail IOSF-SB MailBox Interface Driver
+ * Copyright (c) 2013, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ *
+ * The IOSF-SB is a fabric bus available on Atom based SOC's that uses a
+ * mailbox interface (MBI) to communicate with mutiple devices. This
+ * driver implements BayTrail-specific access to this interface.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/spinlock.h>
+#include <linux/pci.h>
+
+#include "intel_baytrail.h"
+
+static DEFINE_SPINLOCK(iosf_mbi_lock);
+
+static inline u32 iosf_mbi_form_mcr(u8 op, u8 port, u8 offset)
+{
+	return (op << 24) | (port << 16) | (offset << 8) | BT_MBI_ENABLE;
+}
+
+static struct pci_dev *mbi_pdev;	/* one mbi device */
+
+/* Hold lock before calling */
+static int iosf_mbi_pci_read_mdr(u32 mcrx, u32 mcr, u32 *mdr)
+{
+	int result;
+
+	if (!mbi_pdev)
+		return -ENODEV;
+
+	if (mcrx) {
+		result = pci_write_config_dword(mbi_pdev,
+						BT_MBI_MCRX_OFFSET, mcrx);
+		if (result < 0)
+			goto iosf_mbi_read_err;
+	}
+
+	result = pci_write_config_dword(mbi_pdev,
+					BT_MBI_MCR_OFFSET, mcr);
+	if (result < 0)
+		goto iosf_mbi_read_err;
+
+	result = pci_read_config_dword(mbi_pdev,
+				       BT_MBI_MDR_OFFSET, mdr);
+	if (result < 0)
+		goto iosf_mbi_read_err;
+
+	return 0;
+
+iosf_mbi_read_err:
+	dev_err(&mbi_pdev->dev, "error: PCI config operation returned %d\n",
+		result);
+	return result;
+}
+
+/* Hold lock before calling */
+static int iosf_mbi_pci_write_mdr(u32 mcrx, u32 mcr, u32 mdr)
+{
+	int result;
+
+	if (!mbi_pdev)
+		return -ENODEV;
+
+	result = pci_write_config_dword(mbi_pdev,
+					BT_MBI_MDR_OFFSET, mdr);
+	if (result < 0)
+		goto iosf_mbi_write_err;
+
+	if (mcrx) {
+		result = pci_write_config_dword(mbi_pdev,
+			 BT_MBI_MCRX_OFFSET, mcrx);
+		if (result < 0)
+			goto iosf_mbi_write_err;
+	}
+
+	result = pci_write_config_dword(mbi_pdev,
+					BT_MBI_MCR_OFFSET, mcr);
+	if (result < 0)
+		goto iosf_mbi_write_err;
+
+	return 0;
+
+iosf_mbi_write_err:
+	dev_err(&mbi_pdev->dev, "error: PCI config operation returned %d\n",
+		result);
+	return result;
+}
+
+int bt_mbi_read(u8 port, u8 opcode, u32 offset, u32 *mdr)
+{
+	u32 mcr, mcrx;
+	unsigned long flags;
+	int ret;
+
+	/*Access to the GFX unit is handled by GPU code */
+	BUG_ON(port == BT_MBI_UNIT_GFX);
+
+	mcr = iosf_mbi_form_mcr(opcode, port, offset & BT_MBI_MASK_LO);
+	mcrx = offset & BT_MBI_MASK_HI;
+
+	spin_lock_irqsave(&iosf_mbi_lock, flags);
+	ret = iosf_mbi_pci_read_mdr(mcrx, mcr, mdr);
+	spin_unlock_irqrestore(&iosf_mbi_lock, flags);
+
+	return ret;
+}
+EXPORT_SYMBOL(bt_mbi_read);
+
+int bt_mbi_write(u8 port, u8 opcode, u32 offset, u32 mdr)
+{
+	u32 mcr, mcrx;
+	unsigned long flags;
+	int ret;
+
+	/*Access to the GFX unit is handled by GPU code */
+	BUG_ON(port == BT_MBI_UNIT_GFX);
+
+	mcr = iosf_mbi_form_mcr(opcode, port, offset & BT_MBI_MASK_LO);
+	mcrx = offset & BT_MBI_MASK_HI;
+
+	spin_lock_irqsave(&iosf_mbi_lock, flags);
+	ret = iosf_mbi_pci_write_mdr(mcrx, mcr, mdr);
+	spin_unlock_irqrestore(&iosf_mbi_lock, flags);
+
+	return ret;
+}
+EXPORT_SYMBOL(bt_mbi_write);
+
+int bt_mbi_modify(u8 port, u8 opcode, u32 offset, u32 mdr, u32 mask)
+{
+	u32 mcr, mcrx;
+	u32 value;
+	unsigned long flags;
+	int ret;
+
+	/*Access to the GFX unit is handled by GPU code */
+	BUG_ON(port == BT_MBI_UNIT_GFX);
+
+	mcr = iosf_mbi_form_mcr(opcode, port, offset & BT_MBI_MASK_LO);
+	mcrx = offset & BT_MBI_MASK_HI;
+
+	spin_lock_irqsave(&iosf_mbi_lock, flags);
+
+	/* Read current mdr value */
+	ret = iosf_mbi_pci_read_mdr(mcrx, mcr & BT_MBI_RD_MASK, &value);
+	if (ret < 0) {
+		spin_unlock_irqrestore(&iosf_mbi_lock, flags);
+		return ret;
+	}
+
+	/* Apply mask */
+	value &= ~mask;
+	mdr &= mask;
+	value |= mdr;
+
+	/* Write back */
+	ret = iosf_mbi_pci_write_mdr(mcrx, mcr | BT_MBI_WR_MASK, value);
+
+	spin_unlock_irqrestore(&iosf_mbi_lock, flags);
+
+	return ret;
+}
+EXPORT_SYMBOL(bt_mbi_modify);
+
+static int iosf_mbi_probe(struct pci_dev *pdev,
+			  const struct pci_device_id *unused)
+{
+	int ret;
+
+	ret = pci_enable_device(pdev);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "error: could not enable device\n");
+		return ret;
+	}
+
+	mbi_pdev = pci_dev_get(pdev);
+	return 0;
+}
+
+static DEFINE_PCI_DEVICE_TABLE(iosf_mbi_pci_ids) = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x0F00) },
+	{ 0, },
+};
+MODULE_DEVICE_TABLE(pci, iosf_mbi_pci_ids);
+
+static struct pci_driver iosf_mbi_pci_driver = {
+	.name		= "iosf_mbi_pci",
+	.probe		= iosf_mbi_probe,
+	.id_table	= iosf_mbi_pci_ids,
+};
+
+static int __init bt_mbi_init(void)
+{
+	return pci_register_driver(&iosf_mbi_pci_driver);
+}
+
+static void __exit bt_mbi_exit(void)
+{
+	pci_unregister_driver(&iosf_mbi_pci_driver);
+	if (mbi_pdev) {
+		pci_dev_put(mbi_pdev);
+		mbi_pdev = NULL;
+	}
+}
+
+module_init(bt_mbi_init);
+module_exit(bt_mbi_exit);
+
+MODULE_AUTHOR("David E. Box <david.e.box@linux.intel.com>");
+MODULE_DESCRIPTION("BayTrail Mailbox Interface accessor");
+MODULE_LICENSE("GPL v2");

drivers/platform/x86/intel_baytrail.h

+/*
+ * intel_baytrail.h: MailBox access support for Intel BayTrail platforms
+ */
+
+#ifndef INTEL_BAYTRAIL_MBI_SYMS_H
+#define INTEL_BAYTRAIL_MBI_SYMS_H
+
+#define BT_MBI_MCR_OFFSET	0xD0
+#define BT_MBI_MDR_OFFSET	0xD4
+#define BT_MBI_MCRX_OFFSET	0xD8
+
+#define BT_MBI_RD_MASK		0xFEFFFFFF
+#define BT_MBI_WR_MASK		0X01000000
+
+#define BT_MBI_MASK_HI		0xFFFFFF00
+#define BT_MBI_MASK_LO		0x000000FF
+#define BT_MBI_ENABLE		0xF0
+
+/* BT-SB unit access methods */
+#define BT_MBI_UNIT_AUNIT	0x00
+#define BT_MBI_UNIT_SMC		0x01
+#define BT_MBI_UNIT_CPU		0x02
+#define BT_MBI_UNIT_BUNIT	0x03
+#define BT_MBI_UNIT_PMC		0x04
+#define BT_MBI_UNIT_GFX		0x06
+#define BT_MBI_UNIT_SMI		0x0C
+#define BT_MBI_UNIT_USB		0x43
+#define BT_MBI_UNIT_SATA	0xA3
+#define BT_MBI_UNIT_PCIE	0xA6
+
+/* Read/write opcodes */
+#define BT_MBI_AUNIT_READ	0x10
+#define BT_MBI_AUNIT_WRITE	0x11
+#define BT_MBI_SMC_READ		0x10
+#define BT_MBI_SMC_WRITE	0x11
+#define BT_MBI_CPU_READ		0x10
+#define BT_MBI_CPU_WRITE	0x11
+#define BT_MBI_BUNIT_READ	0x10
+#define BT_MBI_BUNIT_WRITE	0x11
+#define BT_MBI_PMC_READ		0x06
+#define BT_MBI_PMC_WRITE	0x07
+#define BT_MBI_GFX_READ		0x00
+#define BT_MBI_GFX_WRITE	0x01
+#define BT_MBI_SMIO_READ	0x06
+#define BT_MBI_SMIO_WRITE	0x07
+#define BT_MBI_USB_READ		0x06
+#define BT_MBI_USB_WRITE	0x07
+#define BT_MBI_SATA_READ	0x00
+#define BT_MBI_SATA_WRITE	0x01
+#define BT_MBI_PCIE_READ	0x00
+#define BT_MBI_PCIE_WRITE	0x01
+
+/**
+ * bt_mbi_read() - MailBox Interface read command
+ * @port:	port indicating subunit being accessed
+ * @opcode:	port specific read or write opcode
+ * @offset:	register address offset
+ * @mdr:	register data to be read
+ *
+ * Locking is handled by spinlock - cannot sleep.
+ * Return: Nonzero on error
+ */
+int bt_mbi_read(u8 port, u8 opcode, u32 offset, u32 *mdr);
+
+/**
+ * bt_mbi_write() - MailBox unmasked write command
+ * @port:	port indicating subunit being accessed
+ * @opcode:	port specific read or write opcode
+ * @offset:	register address offset
+ * @mdr:	register data to be written
+ *
+ * Locking is handled by spinlock - cannot sleep.
+ * Return: Nonzero on error
+ */
+int bt_mbi_write(u8 port, u8 opcode, u32 offset, u32 mdr);
+
+/**
+ * bt_mbi_modify() - MailBox masked write command
+ * @port:	port indicating subunit being accessed
+ * @opcode:	port specific read or write opcode
+ * @offset:	register address offset
+ * @mdr:	register data being modified
+ * @mask:	mask indicating bits in mdr to be modified
+ *
+ * Locking is handled by spinlock - cannot sleep.
+ * Return: Nonzero on error
+ */
+int bt_mbi_modify(u8 port, u8 opcode, u32 offset, u32 mdr, u32 mask);
+
+#endif /* INTEL_BAYTRAIL_MBI_SYMS_H */

drivers/platform/x86/intel_scu_ipc.c

@@ -62,12 +62,10 @@
 #define IPC_RWBUF_SIZE    20		/* IPC Read buffer Size */
 #define IPC_IOC	          0x100		/* IPC command register IOC bit */
 
-enum {
-	SCU_IPC_LINCROFT,
-	SCU_IPC_PENWELL,
-	SCU_IPC_CLOVERVIEW,
-	SCU_IPC_TANGIER,
-};
+#define PCI_DEVICE_ID_LINCROFT		0x082a
+#define PCI_DEVICE_ID_PENWELL		0x080e
+#define PCI_DEVICE_ID_CLOVERVIEW	0x08ea
+#define PCI_DEVICE_ID_TANGIER		0x11a0
 
 /* intel scu ipc driver data*/
 struct intel_scu_ipc_pdata_t {
@@ -78,35 +76,29 @@ struct intel_scu_ipc_pdata_t {
 	u8 irq_mode;
 };
 
-static struct intel_scu_ipc_pdata_t intel_scu_ipc_pdata[] = {
-	[SCU_IPC_LINCROFT] = {
+static struct intel_scu_ipc_pdata_t intel_scu_ipc_lincroft_pdata = {
 	.ipc_base = 0xff11c000,
 	.i2c_base = 0xff12b000,
 	.ipc_len = 0x100,
 	.i2c_len = 0x10,
 	.irq_mode = 0,
-	},
-	[SCU_IPC_PENWELL] = {
-		.ipc_base = 0xff11c000,
-		.i2c_base = 0xff12b000,
-		.ipc_len = 0x100,
-		.i2c_len = 0x10,
-		.irq_mode = 1,
-	},
-	[SCU_IPC_CLOVERVIEW] = {
+};
+
+/* Penwell and Cloverview */
+static struct intel_scu_ipc_pdata_t intel_scu_ipc_penwell_pdata = {
 	.ipc_base = 0xff11c000,
 	.i2c_base = 0xff12b000,
 	.ipc_len = 0x100,
 	.i2c_len = 0x10,
 	.irq_mode = 1,
-	},
-	[SCU_IPC_TANGIER] = {
+};
+
+static struct intel_scu_ipc_pdata_t intel_scu_ipc_tangier_pdata = {
 	.ipc_base = 0xff009000,
 	.i2c_base  = 0xff00d000,
 	.ipc_len  = 0x100,
 	.i2c_len = 0x10,
 	.irq_mode = 0,
-	},
 };
 
 static int ipc_probe(struct pci_dev *dev, const struct pci_device_id *id);
@@ -583,15 +575,14 @@ static irqreturn_t ioc(int irq, void *dev_id)
  */
 static int ipc_probe(struct pci_dev *dev, const struct pci_device_id *id)
 {
-	int err, pid;
+	int err;
 	struct intel_scu_ipc_pdata_t *pdata;
 	resource_size_t pci_resource;
 
 	if (ipcdev.pdev)		/* We support only one SCU */
 		return -EBUSY;
 
-	pid = id->driver_data;
-	pdata = &intel_scu_ipc_pdata[pid];
+	pdata = (struct intel_scu_ipc_pdata_t *)id->driver_data;
 
 	ipcdev.pdev = pci_dev_get(dev);
 	ipcdev.irq_mode = pdata->irq_mode;
@@ -650,11 +641,21 @@ static void ipc_remove(struct pci_dev *pdev)
 }
 
 static DEFINE_PCI_DEVICE_TABLE(pci_ids) = {
-	{PCI_VDEVICE(INTEL, 0x082a), SCU_IPC_LINCROFT},
-	{PCI_VDEVICE(INTEL, 0x080e), SCU_IPC_PENWELL},
-	{PCI_VDEVICE(INTEL, 0x08ea), SCU_IPC_CLOVERVIEW},
-	{PCI_VDEVICE(INTEL, 0x11a0), SCU_IPC_TANGIER},
-	{ 0,}
+	{
+		PCI_VDEVICE(INTEL, PCI_DEVICE_ID_LINCROFT),
+		(kernel_ulong_t)&intel_scu_ipc_lincroft_pdata,
+	}, {
+		PCI_VDEVICE(INTEL, PCI_DEVICE_ID_PENWELL),
+		(kernel_ulong_t)&intel_scu_ipc_penwell_pdata,
+	}, {
+		PCI_VDEVICE(INTEL, PCI_DEVICE_ID_CLOVERVIEW),
+		(kernel_ulong_t)&intel_scu_ipc_penwell_pdata,
+	}, {
+		PCI_VDEVICE(INTEL, PCI_DEVICE_ID_TANGIER),
+		(kernel_ulong_t)&intel_scu_ipc_tangier_pdata,
+	}, {
+		0,
+	}
 };
 MODULE_DEVICE_TABLE(pci, pci_ids);
 

drivers/platform/x86/mxm-wmi.c

@@ -20,6 +20,7 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/init.h>
+#include <linux/mxm-wmi.h>
 #include <linux/acpi.h>
 
 MODULE_AUTHOR("Dave Airlie");

drivers/platform/x86/sony-laptop.c

@@ -789,7 +789,7 @@ static int sony_nc_buffer_call(acpi_handle handle, char *name, u64 *value,
 		void *buffer, size_t buflen)
 {
 	int ret = 0;
-	size_t len = len;
+	size_t len;
 	union acpi_object *object = __call_snc_method(handle, name, value);
 
 	if (!object)

drivers/platform/x86/toshiba_acpi.c

@@ -149,6 +149,7 @@ static const struct acpi_device_id toshiba_device_ids[] = {
 MODULE_DEVICE_TABLE(acpi, toshiba_device_ids);
 
 static const struct key_entry toshiba_acpi_keymap[] = {
+	{ KE_KEY, 0x9e, { KEY_RFKILL } },
 	{ KE_KEY, 0x101, { KEY_MUTE } },
 	{ KE_KEY, 0x102, { KEY_ZOOMOUT } },
 	{ KE_KEY, 0x103, { KEY_ZOOMIN } },