Merge tag 'imx-dt64-6.1' of...

Merge tag 'imx-dt64-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt

i.MX arm64 device tree change for 6.1:

- New board support: i.MX8DXL EVK, Kontron SL/BL i.MX8MM OSM-S, i.MX8MM
  Gateworks GW7904, MSC SM2S-IMX8PLUS SoM and carrier board, NXP
  LS2081ARDB.
- Update i.MX8MQ device tree to use generic name 'dma-controller' for
  SDMA.
- A number of i.MX8ULP device tree improvements and updates: correct
  parent clock of LPI2C & LPSPI, increase the clock speed of LPSPI, add
  PMU and mailbox device, drop undocumented CGC property, enable FEC, etc.
- Add interconnect property for various i.MX8MP blk-ctrl devices.
- Enable VPU PGC, blk-ctrl and PCIe support for i.MX8MP SoC.
- A set of changes from Peng Fan to add various devices for i.MX93 SoC,
  including MU, blk-ctrl, PMU, LPI2C, LPSPI, SRC, etc.
- Two set of changes to update LS1043A and LS1046A device trees on
  various aspects, including USB3, PCIe, DMA, mdio-mux, QSPI Flash, etc.
- Board imx8mq-librem5 update: add USB role switching, add RGB PWM
  notification LEDs, add voice coil motor for focus control, fix MIPI_CSI
  description.
- A series from Frieder Schrempf to improve imx8mm-kontron device trees
  for VSELECT switch, DDRC operating point, SPI NOR partition layout etc.
- A set of display and PMIC related additions and improvements on
  imx8mm-verdin board.
- A number of i.MX8M Plus DHCOM PDK2 device tree improvments from Marek
  Vasut.
- A few imx8mp-venice device tree updates on USB, cpufreq and WiFi/BT.
- A series from Vladimir Oltean to enable multiple switch CPU ports
  support.
- Other small and random board specific updates.

* tag 'imx-dt64-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (90 commits)
  arm64: dts: ls1046a-qds: Modify the qspi flash frequency
  arm64: dts: ls1046a-qds: add mmio based mdio-mux nodes for FPGA
  arm64: dts: ls1046a: add gpios based i2c recovery information
  arm64: dts: ls1046a: use a pseudo-bus to constrain usb and sata dma size
  arm64: dts: ls1046a: make dma-coherent global to the SoC
  arm64: dts: ls1046a: add missing dma ranges property
  arm64: dts: ls1046a: Add big-endian property for PCIe nodes
  arm64: dts: ls1046a: Add the PME interrupt and big-endian to PCIe EP nodes
  arm64: dts: ls1046a: Enable usb3-lpm-capable for usb3 node
  arm64: dts: ls1043a-rdb: add pcf85263 rtc node
  arm64: dts: ls1043a-qds: add mmio based mdio-mux support
  arm64: dts: ls1043a: use a pseudo-bus to constrain usb and sata dma size
  arm64: dts: ls1043a: add gpio based i2c recovery information
  arm64: dts: ls1043a: make dma-coherent global to the SoC
  arm64: dts: ls1043a: add missing dma ranges property
  arm64: dts: ls1043a: Add big-endian property for PCIe nodes
  arm64: dts: ls1043a: Add SCFG phandle for PCIe nodes
  arm64: dts: ls1043a: use pcie aer/pme interrupts
  arm64: dts: ls1043a: Enable usb3-lpm-capable for usb3 node
  arm64: dts: ls1043a: fix the wrong size of dcfg space
  ...

Link: https://lore.kernel.org/r/20220918092806.2152700-4-shawnguo@kernel.orgSigned-off-by: Arnd Bergmann <arnd@arndb.de>

arch/arm64/boot/dts/freescale/Makefile

@@ -23,6 +23,7 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1088a-rdb.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1088a-ten64.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-qds.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-rdb.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2081a-rdb.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-simu.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2088a-qds.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2088a-rdb.dtb
@@ -48,6 +49,7 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds-85bb.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds-899b.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds-9999.dtb
 
+dtb-$(CONFIG_ARCH_MXC) += imx8dxl-evk.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-beacon-kit.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-data-modul-edm-sbc.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-ddr4-evk.dtb
@@ -55,7 +57,8 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mm-emcon-avari.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-evk.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-icore-mx8mm-ctouch2.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-icore-mx8mm-edimm2.2.dtb
-dtb-$(CONFIG_ARCH_MXC) += imx8mm-kontron-n801x-s.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-kontron-bl.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-kontron-bl-osm-s.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-mx8menlo.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-nitrogen-r2.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-phyboard-polis-rdk.dtb
@@ -67,6 +70,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw73xx-0x.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw7901.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw7902.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw7903.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw7904.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-verdin-nonwifi-dahlia.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-verdin-nonwifi-dev.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-verdin-wifi-dahlia.dtb
@@ -83,6 +87,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mn-venice-gw7902.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-dhcom-pdk2.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-evk.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-icore-mx8mp-edimm2.2.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-msc-sm2s-ep1.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-phyboard-pollux-rdk.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-tqma8mpql-mba8mpxl.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-venice-gw74xx.dtb

arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts

@@ -59,6 +59,10 @@ &enetc_port2 {
 	status = "okay";
 };
 
+&enetc_port3 {
+	status = "okay";
+};
+
 &i2c3 {
 	eeprom@57 {
 		compatible = "atmel,24c32";
@@ -104,7 +108,10 @@ &mscc_felix_port3 {
 };
 
 &mscc_felix_port4 {
-	ethernet = <&enetc_port2>;
+	status = "okay";
+};
+
+&mscc_felix_port5 {
 	status = "okay";
 };
 

arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var2.dts

@@ -39,6 +39,10 @@ &enetc_port2 {
 	status = "okay";
 };
 
+&enetc_port3 {
+	status = "okay";
+};
+
 &mscc_felix {
 	status = "okay";
 };
@@ -60,6 +64,9 @@ &mscc_felix_port1 {
 };
 
 &mscc_felix_port4 {
-	ethernet = <&enetc_port2>;
+	status = "okay";
+};
+
+&mscc_felix_port5 {
 	status = "okay";
 };

arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts

@@ -29,6 +29,9 @@ aliases {
 		ethernet3 = &mscc_felix_port1;
 		ethernet4 = &mscc_felix_port2;
 		ethernet5 = &mscc_felix_port3;
+		ethernet6 = &mscc_felix_port4;
+		ethernet7 = &mscc_felix_port5;
+		ethernet8 = &enetc_port3;
 	};
 
 	chosen {
@@ -151,6 +154,10 @@ &enetc_port2 {
 	status = "okay";
 };
 
+&enetc_port3 {
+	status = "okay";
+};
+
 &esdhc {
 	sd-uhs-sdr104;
 	sd-uhs-sdr50;
@@ -278,7 +285,10 @@ &mscc_felix_port3 {
 };
 
 &mscc_felix_port4 {
-	ethernet = <&enetc_port2>;
+	status = "okay";
+};
+
+&mscc_felix_port5 {
 	status = "okay";
 };
 

arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi

@@ -1156,6 +1156,7 @@ mscc_felix_port3: port@3 {
 					mscc_felix_port4: port@4 {
 						reg = <4>;
 						phy-mode = "internal";
+						ethernet = <&enetc_port2>;
 						status = "disabled";
 
 						fixed-link {
@@ -1168,6 +1169,7 @@ fixed-link {
 					mscc_felix_port5: port@5 {
 						reg = <5>;
 						phy-mode = "internal";
+						ethernet = <&enetc_port3>;
 						status = "disabled";
 
 						fixed-link {

arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts

@@ -3,7 +3,7 @@
  * Device Tree Include file for Freescale Layerscape-1043A family SoC.
  *
  * Copyright 2014-2015 Freescale Semiconductor, Inc.
- * Copyright 2018 NXP
+ * Copyright 2018-2021 NXP
  *
  * Mingkai Hu <Mingkai.hu@freescale.com>
  */
@@ -24,6 +24,22 @@ aliases {
 		serial1 = &duart1;
 		serial2 = &duart2;
 		serial3 = &duart3;
+		sgmii-riser-s1-p1 = &sgmii_phy_s1_p1;
+		sgmii-riser-s2-p1 = &sgmii_phy_s2_p1;
+		sgmii-riser-s3-p1 = &sgmii_phy_s3_p1;
+		sgmii-riser-s4-p1 = &sgmii_phy_s4_p1;
+		qsgmii-s1-p1 = &qsgmii_phy_s1_p1;
+		qsgmii-s1-p2 = &qsgmii_phy_s1_p2;
+		qsgmii-s1-p3 = &qsgmii_phy_s1_p3;
+		qsgmii-s1-p4 = &qsgmii_phy_s1_p4;
+		qsgmii-s2-p1 = &qsgmii_phy_s2_p1;
+		qsgmii-s2-p2 = &qsgmii_phy_s2_p2;
+		qsgmii-s2-p3 = &qsgmii_phy_s2_p3;
+		qsgmii-s2-p4 = &qsgmii_phy_s2_p4;
+		emi1-slot1 = &ls1043mdio_s1;
+		emi1-slot2 = &ls1043mdio_s2;
+		emi1-slot3 = &ls1043mdio_s3;
+		emi1-slot4 = &ls1043mdio_s4;
 	};
 
 	chosen {
@@ -62,8 +78,11 @@ nand@1,0 {
 	};
 
 	fpga: board-control@2,0 {
-		compatible = "fsl,ls1043aqds-fpga", "fsl,fpga-qixis";
+		compatible = "fsl,ls1043aqds-fpga", "fsl,fpga-qixis", "simple-mfd";
 		reg = <0x2 0x0 0x0000100>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 2 0 0x100>;
 	};
 };
 
@@ -153,3 +172,153 @@ &usb0 {
 };
 
 #include "fsl-ls1043-post.dtsi"
+
+&fman0 {
+	ethernet@e0000 {
+		phy-handle = <&qsgmii_phy_s2_p1>;
+		phy-connection-type = "sgmii";
+	};
+
+	ethernet@e2000 {
+		phy-handle = <&qsgmii_phy_s2_p2>;
+		phy-connection-type = "sgmii";
+	};
+
+	ethernet@e4000 {
+		phy-handle = <&rgmii_phy1>;
+		phy-connection-type = "rgmii";
+	};
+
+	ethernet@e6000 {
+		phy-handle = <&rgmii_phy2>;
+		phy-connection-type = "rgmii";
+	};
+
+	ethernet@e8000 {
+		phy-handle = <&qsgmii_phy_s2_p3>;
+		phy-connection-type = "sgmii";
+	};
+
+	ethernet@ea000 {
+		phy-handle = <&qsgmii_phy_s2_p4>;
+		phy-connection-type = "sgmii";
+	};
+
+	ethernet@f0000 { /* DTSEC9/10GEC1 */
+		fixed-link = <1 1 10000 0 0>;
+		phy-connection-type = "xgmii";
+	};
+};
+
+&fpga {
+	mdio-mux-emi1@54 {
+		compatible = "mdio-mux-mmioreg", "mdio-mux";
+		mdio-parent-bus = <&mdio0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x54 1>;    /* BRDCFG4 */
+		mux-mask = <0xe0>; /* EMI1 */
+
+		/* On-board RGMII1 PHY */
+		ls1043mdio0: mdio@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			rgmii_phy1: ethernet-phy@1 { /* MAC3 */
+				reg = <0x1>;
+			};
+		};
+
+		/* On-board RGMII2 PHY */
+		ls1043mdio1: mdio@20 {
+			reg = <0x20>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			rgmii_phy2: ethernet-phy@2 { /* MAC4 */
+				reg = <0x2>;
+			};
+		};
+
+		/* Slot 1 */
+		ls1043mdio_s1: mdio@40 {
+			reg = <0x40>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			qsgmii_phy_s1_p1: ethernet-phy@4 {
+				reg = <0x4>;
+			};
+
+			qsgmii_phy_s1_p2: ethernet-phy@5 {
+				reg = <0x5>;
+			};
+
+			qsgmii_phy_s1_p3: ethernet-phy@6 {
+				reg = <0x6>;
+			};
+
+			qsgmii_phy_s1_p4: ethernet-phy@7 {
+				reg = <0x7>;
+			};
+
+			sgmii_phy_s1_p1: ethernet-phy@1c {
+				reg = <0x1c>;
+			};
+		};
+
+		/* Slot 2 */
+		ls1043mdio_s2: mdio@60 {
+			reg = <0x60>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			qsgmii_phy_s2_p1: ethernet-phy@8 {
+				reg = <0x8>;
+			};
+
+			qsgmii_phy_s2_p2: ethernet-phy@9 {
+				reg = <0x9>;
+			};
+
+			qsgmii_phy_s2_p3: ethernet-phy@a {
+				reg = <0xa>;
+			};
+
+			qsgmii_phy_s2_p4: ethernet-phy@b {
+				reg = <0xb>;
+			};
+
+			sgmii_phy_s2_p1: ethernet-phy@1c {
+				reg = <0x1c>;
+			};
+		};
+
+		/* Slot 3 */
+		ls1043mdio_s3: mdio@80 {
+			reg = <0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			sgmii_phy_s3_p1: ethernet-phy@1c {
+				reg = <0x1c>;
+			};
+		};
+
+		/* Slot 4 */
+		ls1043mdio_s4: mdio@a0 {
+			reg = <0xa0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			sgmii_phy_s4_p1: ethernet-phy@1c {
+				reg = <0x1c>;
+			};
+		};
+	};
+};

arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts

@@ -29,23 +29,33 @@ chosen {
 
 &i2c0 {
 	status = "okay";
+
 	ina220@40 {
 		compatible = "ti,ina220";
 		reg = <0x40>;
 		shunt-resistor = <1000>;
 	};
+
 	adt7461a@4c {
 		compatible = "adi,adt7461";
 		reg = <0x4c>;
 	};
+
+	rtc@51 {
+		compatible = "nxp,pcf85263";
+		reg = <0x51>;
+	};
+
 	eeprom@52 {
 		compatible = "atmel,24c512";
 		reg = <0x52>;
 	};
+
 	eeprom@53 {
 		compatible = "atmel,24c512";
 		reg = <0x53>;
 	};
+
 	rtc@68 {
 		compatible = "pericom,pt7c4338";
 		reg = <0x68>;

arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi

@@ -11,6 +11,7 @@
 #include <dt-bindings/clock/fsl,qoriq-clockgen.h>
 #include <dt-bindings/thermal/thermal.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/gpio/gpio.h>
 
 / {
 	compatible = "fsl,ls1043a";
@@ -300,6 +301,8 @@ soc: soc {
 		#address-cells = <2>;
 		#size-cells = <2>;
 		ranges;
+		dma-ranges = <0x0 0x0 0x0 0x0 0x10000 0x00000000>;
+		dma-coherent;
 
 		clockgen: clocking@1ee1000 {
 			compatible = "fsl,ls1043a-clockgen";
@@ -393,7 +396,7 @@ sfp: efuse@1e80000 {
 
 		dcfg: dcfg@1ee0000 {
 			compatible = "fsl,ls1043a-dcfg", "syscon";
-			reg = <0x0 0x1ee0000 0x0 0x10000>;
+			reg = <0x0 0x1ee0000 0x0 0x1000>;
 			big-endian;
 		};
 
@@ -536,7 +539,7 @@ dspi1: spi@2110000 {
 		};
 
 		i2c0: i2c@2180000 {
-			compatible = "fsl,vf610-i2c";
+			compatible = "fsl,ls1043a-i2c", "fsl,vf610-i2c";
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0x0 0x2180000 0x0 0x10000>;
@@ -551,7 +554,7 @@ i2c0: i2c@2180000 {
 		};
 
 		i2c1: i2c@2190000 {
-			compatible = "fsl,vf610-i2c";
+			compatible = "fsl,ls1043a-i2c", "fsl,vf610-i2c";
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0x0 0x2190000 0x0 0x10000>;
@@ -559,11 +562,12 @@ i2c1: i2c@2190000 {
 			clock-names = "i2c";
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(1)>;
+			scl-gpios = <&gpio4 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 			status = "disabled";
 		};
 
 		i2c2: i2c@21a0000 {
-			compatible = "fsl,vf610-i2c";
+			compatible = "fsl,ls1043a-i2c", "fsl,vf610-i2c";
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0x0 0x21a0000 0x0 0x10000>;
@@ -571,11 +575,12 @@ i2c2: i2c@21a0000 {
 			clock-names = "i2c";
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(1)>;
+			scl-gpios = <&gpio4 10 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 			status = "disabled";
 		};
 
 		i2c3: i2c@21b0000 {
-			compatible = "fsl,vf610-i2c";
+			compatible = "fsl,ls1043a-i2c", "fsl,vf610-i2c";
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0x0 0x21b0000 0x0 0x10000>;
@@ -583,6 +588,7 @@ i2c3: i2c@21b0000 {
 			clock-names = "i2c";
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(1)>;
+			scl-gpios = <&gpio4 12 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 			status = "disabled";
 		};
 
@@ -810,48 +816,59 @@ QORIQ_CLK_PLL_DIV(1)>,
 					    QORIQ_CLK_PLL_DIV(1)>;
 		};
 
-		usb0: usb@2f00000 {
-			compatible = "snps,dwc3";
-			reg = <0x0 0x2f00000 0x0 0x10000>;
-			interrupts = <0 60 0x4>;
-			dr_mode = "host";
-			snps,quirk-frame-length-adjustment = <0x20>;
-			snps,dis_rxdet_inp3_quirk;
-			snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
-			status = "disabled";
-		};
+		aux_bus: aux_bus {
+			#address-cells = <2>;
+			#size-cells = <2>;
+			compatible = "simple-bus";
+			ranges;
+			dma-ranges = <0x0 0x0 0x0 0x0 0x100 0x00000000>;
+
+			usb0: usb@2f00000 {
+				compatible = "snps,dwc3";
+				reg = <0x0 0x2f00000 0x0 0x10000>;
+				interrupts = <0 60 IRQ_TYPE_LEVEL_HIGH>;
+				dr_mode = "host";
+				snps,quirk-frame-length-adjustment = <0x20>;
+				snps,dis_rxdet_inp3_quirk;
+				usb3-lpm-capable;
+				snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
+				status = "disabled";
+			};
 
-		usb1: usb@3000000 {
-			compatible = "snps,dwc3";
-			reg = <0x0 0x3000000 0x0 0x10000>;
-			interrupts = <0 61 0x4>;
-			dr_mode = "host";
-			snps,quirk-frame-length-adjustment = <0x20>;
-			snps,dis_rxdet_inp3_quirk;
-			snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
-			status = "disabled";
-		};
+			usb1: usb@3000000 {
+				compatible = "snps,dwc3";
+				reg = <0x0 0x3000000 0x0 0x10000>;
+				interrupts = <0 61 IRQ_TYPE_LEVEL_HIGH>;
+				dr_mode = "host";
+				snps,quirk-frame-length-adjustment = <0x20>;
+				snps,dis_rxdet_inp3_quirk;
+				usb3-lpm-capable;
+				snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
+				status = "disabled";
+			};
 
-		usb2: usb@3100000 {
-			compatible = "snps,dwc3";
-			reg = <0x0 0x3100000 0x0 0x10000>;
-			interrupts = <0 63 0x4>;
-			dr_mode = "host";
-			snps,quirk-frame-length-adjustment = <0x20>;
-			snps,dis_rxdet_inp3_quirk;
-			snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
-			status = "disabled";
-		};
+			usb2: usb@3100000 {
+				compatible = "snps,dwc3";
+				reg = <0x0 0x3100000 0x0 0x10000>;
+				interrupts = <0 63 IRQ_TYPE_LEVEL_HIGH>;
+				dr_mode = "host";
+				snps,quirk-frame-length-adjustment = <0x20>;
+				snps,dis_rxdet_inp3_quirk;
+				usb3-lpm-capable;
+				snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
+				status = "disabled";
+			};
 
-		sata: sata@3200000 {
-			compatible = "fsl,ls1043a-ahci";
-			reg = <0x0 0x3200000 0x0 0x10000>,
-				<0x0 0x20140520 0x0 0x4>;
-			reg-names = "ahci", "sata-ecc";
-			interrupts = <0 69 0x4>;
-			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
-					    QORIQ_CLK_PLL_DIV(1)>;
-			dma-coherent;
+			sata: sata@3200000 {
+				compatible = "fsl,ls1043a-ahci";
+				reg = <0x0 0x3200000 0x0 0x10000>,
+					<0x0 0x20140520 0x0 0x4>;
+				reg-names = "ahci", "sata-ecc";
+				interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+						    QORIQ_CLK_PLL_DIV(1)>;
+				dma-coherent;
+			};
 		};
 
 		msi1: msi-controller1@1571000 {
@@ -880,13 +897,12 @@ pcie1: pcie@3400000 {
 			reg = <0x00 0x03400000 0x0 0x00100000>, /* controller registers */
 			      <0x40 0x00000000 0x0 0x00002000>; /* configuration space */
 			reg-names = "regs", "config";
-			interrupts = <0 118 0x4>, /* controller interrupt */
-				     <0 117 0x4>; /* PME interrupt */
-			interrupt-names = "intr", "pme";
+			interrupts = <0 117 IRQ_TYPE_LEVEL_HIGH>,
+				     <0 118 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "pme", "aer";
 			#address-cells = <3>;
 			#size-cells = <2>;
 			device_type = "pci";
-			dma-coherent;
 			num-viewport = <6>;
 			bus-range = <0x0 0xff>;
 			ranges = <0x81000000 0x0 0x00000000 0x40 0x00010000 0x0 0x00010000   /* downstream I/O */
@@ -898,6 +914,8 @@ pcie1: pcie@3400000 {
 					<0000 0 0 2 &gic 0 111 0x4>,
 					<0000 0 0 3 &gic 0 112 0x4>,
 					<0000 0 0 4 &gic 0 113 0x4>;
+			fsl,pcie-scfg = <&scfg 0>;
+			big-endian;
 			status = "disabled";
 		};
 
@@ -906,13 +924,12 @@ pcie2: pcie@3500000 {
 			reg = <0x00 0x03500000 0x0 0x00100000>, /* controller registers */
 			      <0x48 0x00000000 0x0 0x00002000>; /* configuration space */
 			reg-names = "regs", "config";
-			interrupts = <0 128 0x4>,
-				     <0 127 0x4>;
-			interrupt-names = "intr", "pme";
+			interrupts = <0 127 IRQ_TYPE_LEVEL_HIGH>,
+				     <0 128 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "pme", "aer";
 			#address-cells = <3>;
 			#size-cells = <2>;
 			device_type = "pci";
-			dma-coherent;
 			num-viewport = <6>;
 			bus-range = <0x0 0xff>;
 			ranges = <0x81000000 0x0 0x00000000 0x48 0x00010000 0x0 0x00010000   /* downstream I/O */
@@ -924,6 +941,8 @@ pcie2: pcie@3500000 {
 					<0000 0 0 2 &gic 0 121 0x4>,
 					<0000 0 0 3 &gic 0 122 0x4>,
 					<0000 0 0 4 &gic 0 123 0x4>;
+			fsl,pcie-scfg = <&scfg 1>;
+			big-endian;
 			status = "disabled";
 		};
 
@@ -932,13 +951,12 @@ pcie3: pcie@3600000 {
 			reg = <0x00 0x03600000 0x0 0x00100000>, /* controller registers */
 			      <0x50 0x00000000 0x0 0x00002000>; /* configuration space */
 			reg-names = "regs", "config";
-			interrupts = <0 162 0x4>,
-				     <0 161 0x4>;
-			interrupt-names = "intr", "pme";
+			interrupts = <0 161 IRQ_TYPE_LEVEL_HIGH>,
+				     <0 162 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "pme", "aer";
 			#address-cells = <3>;
 			#size-cells = <2>;
 			device_type = "pci";
-			dma-coherent;
 			num-viewport = <6>;
 			bus-range = <0x0 0xff>;
 			ranges = <0x81000000 0x0 0x00000000 0x50 0x00010000 0x0 0x00010000   /* downstream I/O */
@@ -950,6 +968,8 @@ pcie3: pcie@3600000 {
 					<0000 0 0 2 &gic 0 155 0x4>,
 					<0000 0 0 3 &gic 0 156 0x4>,
 					<0000 0 0 4 &gic 0 157 0x4>;
+			fsl,pcie-scfg = <&scfg 2>;
+			big-endian;
 			status = "disabled";
 		};
 

arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts

@@ -3,7 +3,7 @@
  * Device Tree Include file for Freescale Layerscape-1046A family SoC.
  *
  * Copyright 2016 Freescale Semiconductor, Inc.
- * Copyright 2018 NXP
+ * Copyright 2018-2019 NXP
  *
  * Shaohui Xie <Shaohui.Xie@nxp.com>
  */
@@ -17,14 +17,26 @@ / {
 	compatible = "fsl,ls1046a-qds", "fsl,ls1046a";
 
 	aliases {
+		emi1-slot1 = &ls1046mdio_s1;
+		emi1-slot2 = &ls1046mdio_s2;
+		emi1-slot4 = &ls1046mdio_s4;
 		gpio0 = &gpio0;
 		gpio1 = &gpio1;
 		gpio2 = &gpio2;
 		gpio3 = &gpio3;
+		qsgmii-s2-p1 = &qsgmii_phy_s2_p1;
+		qsgmii-s2-p2 = &qsgmii_phy_s2_p2;
+		qsgmii-s2-p3 = &qsgmii_phy_s2_p3;
+		qsgmii-s2-p4 = &qsgmii_phy_s2_p4;
 		serial0 = &duart0;
 		serial1 = &duart1;
 		serial2 = &duart2;
 		serial3 = &duart3;
+		sgmii-s1-p1 = &sgmii_phy_s1_p1;
+		sgmii-s1-p2 = &sgmii_phy_s1_p2;
+		sgmii-s1-p3 = &sgmii_phy_s1_p3;
+		sgmii-s1-p4 = &sgmii_phy_s1_p4;
+		sgmii-s4-p1 = &sgmii_phy_s4_p1;
 	};
 
 	chosen {
@@ -153,8 +165,9 @@ nand@1,0 {
 	};
 
 	fpga: board-control@2,0 {
-		compatible = "fsl,ls1046aqds-fpga", "fsl,fpga-qixis";
+		compatible = "fsl,ls1046aqds-fpga", "fsl,fpga-qixis", "simple-mfd";
 		reg = <0x2 0x0 0x0000100>;
+		ranges = <0 2 0 0x100>;
 	};
 };
 
@@ -169,7 +182,7 @@ qflash0: flash@0 {
 		compatible = "spansion,m25p80";
 		#address-cells = <1>;
 		#size-cells = <1>;
-		spi-max-frequency = <20000000>;
+		spi-max-frequency = <50000000>;
 		spi-rx-bus-width = <4>;
 		spi-tx-bus-width = <4>;
 		reg = <0>;
@@ -177,3 +190,141 @@ qflash0: flash@0 {
 };
 
 #include "fsl-ls1046-post.dtsi"
+
+&fman0 {
+	ethernet@e0000 {
+		phy-handle = <&qsgmii_phy_s2_p1>;
+		phy-connection-type = "sgmii";
+	};
+
+	ethernet@e2000 {
+		phy-handle = <&sgmii_phy_s4_p1>;
+		phy-connection-type = "sgmii";
+	};
+
+	ethernet@e4000 {
+		phy-handle = <&rgmii_phy1>;
+		phy-connection-type = "rgmii";
+	};
+
+	ethernet@e6000 {
+		phy-handle = <&rgmii_phy2>;
+		phy-connection-type = "rgmii";
+	};
+
+	ethernet@e8000 {
+		phy-handle = <&sgmii_phy_s1_p3>;
+		phy-connection-type = "sgmii";
+	};
+
+	ethernet@ea000 {
+		phy-handle = <&sgmii_phy_s1_p4>;
+		phy-connection-type = "sgmii";
+	};
+
+	ethernet@f0000 { /* DTSEC9/10GEC1 */
+		phy-handle = <&sgmii_phy_s1_p1>;
+		phy-connection-type = "xgmii";
+	};
+
+	ethernet@f2000 { /* DTSEC10/10GEC2 */
+		phy-handle = <&sgmii_phy_s1_p2>;
+		phy-connection-type = "xgmii";
+	};
+};
+
+&fpga {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	mdio-mux-emi1 {
+		compatible = "mdio-mux-mmioreg", "mdio-mux";
+		mdio-parent-bus = <&mdio0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x54 1>;    /* BRDCFG4 */
+		mux-mask = <0xe0>; /* EMI1 */
+
+		/* On-board RGMII1 PHY */
+		ls1046mdio0: mdio@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			rgmii_phy1: ethernet-phy@1 { /* MAC3 */
+				reg = <0x1>;
+			};
+		};
+
+		/* On-board RGMII2 PHY */
+		ls1046mdio1: mdio@1 {
+			reg = <0x20>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			rgmii_phy2: ethernet-phy@2 { /* MAC4 */
+				reg = <0x2>;
+			};
+		};
+
+		/* Slot 1 */
+		ls1046mdio_s1: mdio@2 {
+			reg = <0x40>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			sgmii_phy_s1_p1: ethernet-phy@1c {
+				reg = <0x1c>;
+			};
+
+			sgmii_phy_s1_p2: ethernet-phy@1d {
+				reg = <0x1d>;
+			};
+
+			sgmii_phy_s1_p3: ethernet-phy@1e {
+				reg = <0x1e>;
+			};
+
+			sgmii_phy_s1_p4: ethernet-phy@1f {
+				reg = <0x1f>;
+			};
+		};
+
+		/* Slot 2 */
+		ls1046mdio_s2: mdio@3 {
+			reg = <0x60>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			qsgmii_phy_s2_p1: ethernet-phy@8 {
+				reg = <0x8>;
+			};
+
+			qsgmii_phy_s2_p2: ethernet-phy@9 {
+				reg = <0x9>;
+			};
+
+			qsgmii_phy_s2_p3: ethernet-phy@a {
+				reg = <0xa>;
+			};
+
+			qsgmii_phy_s2_p4: ethernet-phy@b {
+				reg = <0xb>;
+			};
+		};
+
+		/* Slot 4 */
+		ls1046mdio_s4: mdio@5 {
+			reg = <0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			sgmii_phy_s4_p1: ethernet-phy@1c {
+				reg = <0x1c>;
+			};
+		};
+	};
+};

arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi

@@ -11,6 +11,7 @@
 #include <dt-bindings/clock/fsl,qoriq-clockgen.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/thermal/thermal.h>
+#include <dt-bindings/gpio/gpio.h>
 
 / {
 	compatible = "fsl,ls1046a";
@@ -272,6 +273,8 @@ soc: soc {
 		#address-cells = <2>;
 		#size-cells = <2>;
 		ranges;
+		dma-ranges = <0x0 0x0 0x0 0x0 0x10000 0x00000000>;
+		dma-coherent;
 
 		ddr: memory-controller@1080000 {
 			compatible = "fsl,qoriq-memory-controller";
@@ -354,7 +357,6 @@ crypto: crypto@1700000 {
 			ranges = <0x0 0x00 0x1700000 0x100000>;
 			reg = <0x00 0x1700000 0x0 0x100000>;
 			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
-			dma-coherent;
 
 			sec_jr0: jr@10000 {
 				compatible = "fsl,sec-v5.4-job-ring",
@@ -500,7 +502,7 @@ dspi: spi@2100000 {
 		};
 
 		i2c0: i2c@2180000 {
-			compatible = "fsl,vf610-i2c";
+			compatible = "fsl,ls1046a-i2c", "fsl,vf610-i2c";
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0x0 0x2180000 0x0 0x10000>;
@@ -514,35 +516,38 @@ i2c0: i2c@2180000 {
 		};
 
 		i2c1: i2c@2190000 {
-			compatible = "fsl,vf610-i2c";
+			compatible = "fsl,ls1046a-i2c", "fsl,vf610-i2c";
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0x0 0x2190000 0x0 0x10000>;
 			interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(2)>;
+			scl-gpios = <&gpio3 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 			status = "disabled";
 		};
 
 		i2c2: i2c@21a0000 {
-			compatible = "fsl,vf610-i2c";
+			compatible = "fsl,ls1046a-i2c", "fsl,vf610-i2c";
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0x0 0x21a0000 0x0 0x10000>;
 			interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(2)>;
+			scl-gpios = <&gpio3 10 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 			status = "disabled";
 		};
 
 		i2c3: i2c@21b0000 {
-			compatible = "fsl,vf610-i2c";
+			compatible = "fsl,ls1046a-i2c", "fsl,vf610-i2c";
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0x0 0x21b0000 0x0 0x10000>;
 			interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(2)>;
+			scl-gpios = <&gpio3 12 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 			status = "disabled";
 		};
 
@@ -709,44 +714,55 @@ QORIQ_CLK_PLL_DIV(2)>,
 					    QORIQ_CLK_PLL_DIV(2)>;
 		};
 
-		usb0: usb@2f00000 {
-			compatible = "snps,dwc3";
-			reg = <0x0 0x2f00000 0x0 0x10000>;
-			interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
-			dr_mode = "host";
-			snps,quirk-frame-length-adjustment = <0x20>;
-			snps,dis_rxdet_inp3_quirk;
-			snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
-		};
-
-		usb1: usb@3000000 {
-			compatible = "snps,dwc3";
-			reg = <0x0 0x3000000 0x0 0x10000>;
-			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
-			dr_mode = "host";
-			snps,quirk-frame-length-adjustment = <0x20>;
-			snps,dis_rxdet_inp3_quirk;
-			snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
-		};
-
-		usb2: usb@3100000 {
-			compatible = "snps,dwc3";
-			reg = <0x0 0x3100000 0x0 0x10000>;
-			interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
-			dr_mode = "host";
-			snps,quirk-frame-length-adjustment = <0x20>;
-			snps,dis_rxdet_inp3_quirk;
-			snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
-		};
-
-		sata: sata@3200000 {
-			compatible = "fsl,ls1046a-ahci";
-			reg = <0x0 0x3200000 0x0 0x10000>,
-				<0x0 0x20140520 0x0 0x4>;
-			reg-names = "ahci", "sata-ecc";
-			interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
-					    QORIQ_CLK_PLL_DIV(2)>;
+		aux_bus: aux_bus {
+			#address-cells = <2>;
+			#size-cells = <2>;
+			compatible = "simple-bus";
+			ranges;
+			dma-ranges = <0x0 0x0 0x0 0x0 0x100 0x00000000>;
+
+			usb0: usb@2f00000 {
+				compatible = "snps,dwc3";
+				reg = <0x0 0x2f00000 0x0 0x10000>;
+				interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+				dr_mode = "host";
+				snps,quirk-frame-length-adjustment = <0x20>;
+				snps,dis_rxdet_inp3_quirk;
+				snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
+				usb3-lpm-capable;
+			};
+
+			usb1: usb@3000000 {
+				compatible = "snps,dwc3";
+				reg = <0x0 0x3000000 0x0 0x10000>;
+				interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+				dr_mode = "host";
+				snps,quirk-frame-length-adjustment = <0x20>;
+				snps,dis_rxdet_inp3_quirk;
+				snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
+				usb3-lpm-capable;
+			};
+
+			usb2: usb@3100000 {
+				compatible = "snps,dwc3";
+				reg = <0x0 0x3100000 0x0 0x10000>;
+				interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+				dr_mode = "host";
+				snps,quirk-frame-length-adjustment = <0x20>;
+				snps,dis_rxdet_inp3_quirk;
+				snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
+				usb3-lpm-capable;
+			};
+
+			sata: sata@3200000 {
+				compatible = "fsl,ls1046a-ahci";
+				reg = <0x0 0x3200000 0x0 0x10000>,
+					<0x0 0x20140520 0x0 0x4>;
+				reg-names = "ahci", "sata-ecc";
+				interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+						    QORIQ_CLK_PLL_DIV(2)>;
+			};
 		};
 
 		msi1: msi-controller@1580000 {
@@ -790,7 +806,6 @@ pcie1: pcie@3400000 {
 			#address-cells = <3>;
 			#size-cells = <2>;
 			device_type = "pci";
-			dma-coherent;
 			num-viewport = <8>;
 			bus-range = <0x0 0xff>;
 			ranges = <0x81000000 0x0 0x00000000 0x40 0x00010000 0x0 0x00010000   /* downstream I/O */
@@ -802,6 +817,7 @@ pcie1: pcie@3400000 {
 					<0000 0 0 2 &gic GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
 					<0000 0 0 3 &gic GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
 					<0000 0 0 4 &gic GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+			big-endian;
 			status = "disabled";
 		};
 
@@ -810,8 +826,11 @@ pcie_ep1: pcie_ep@3400000 {
 			reg = <0x00 0x03400000 0x0 0x00100000>,
 			      <0x40 0x00000000 0x8 0x00000000>;
 			reg-names = "regs", "addr_space";
+			interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "pme";
 			num-ib-windows = <6>;
 			num-ob-windows = <8>;
+			big-endian;
 			status = "disabled";
 		};
 
@@ -826,7 +845,6 @@ pcie2: pcie@3500000 {
 			#address-cells = <3>;
 			#size-cells = <2>;
 			device_type = "pci";
-			dma-coherent;
 			num-viewport = <8>;
 			bus-range = <0x0 0xff>;
 			ranges = <0x81000000 0x0 0x00000000 0x48 0x00010000 0x0 0x00010000   /* downstream I/O */
@@ -838,6 +856,7 @@ pcie2: pcie@3500000 {
 					<0000 0 0 2 &gic GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
 					<0000 0 0 3 &gic GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
 					<0000 0 0 4 &gic GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+			big-endian;
 			status = "disabled";
 		};
 
@@ -846,8 +865,11 @@ pcie_ep2: pcie_ep@3500000 {
 			reg = <0x00 0x03500000 0x0 0x00100000>,
 			      <0x48 0x00000000 0x8 0x00000000>;
 			reg-names = "regs", "addr_space";
+			interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "pme";
 			num-ib-windows = <6>;
 			num-ob-windows = <8>;
+			big-endian;
 			status = "disabled";
 		};
 
@@ -862,7 +884,6 @@ pcie3: pcie@3600000 {
 			#address-cells = <3>;
 			#size-cells = <2>;
 			device_type = "pci";
-			dma-coherent;
 			num-viewport = <8>;
 			bus-range = <0x0 0xff>;
 			ranges = <0x81000000 0x0 0x00000000 0x50 0x00010000 0x0 0x00010000   /* downstream I/O */
@@ -874,6 +895,7 @@ pcie3: pcie@3600000 {
 					<0000 0 0 2 &gic GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>,
 					<0000 0 0 3 &gic GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>,
 					<0000 0 0 4 &gic GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+			big-endian;
 			status = "disabled";
 		};
 
@@ -882,8 +904,11 @@ pcie_ep3: pcie_ep@3600000 {
 			reg = <0x00 0x03600000 0x0 0x00100000>,
 			      <0x50 0x00000000 0x8 0x00000000>;
 			reg-names = "regs", "addr_space";
+			interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "pme";
 			num-ib-windows = <6>;
 			num-ob-windows = <8>;
+			big-endian;
 			status = "disabled";
 		};
 

arch/arm64/boot/dts/freescale/fsl-ls2080a-rdb.dts

@@ -14,6 +14,7 @@
 
 #include "fsl-ls2080a.dtsi"
 #include "fsl-ls208xa-rdb.dtsi"
+#include <dt-bindings/interrupt-controller/arm-gic.h>
 
 / {
 	model = "Freescale Layerscape 2080a RDB Board";
@@ -23,3 +24,71 @@ chosen {
 		stdout-path = "serial1:115200n8";
 	};
 };
+
+&dpmac5 {
+	phy-handle = <&mdio2_phy1>;
+	phy-connection-type = "10gbase-r";
+};
+
+&dpmac6 {
+	phy-handle = <&mdio2_phy2>;
+	phy-connection-type = "10gbase-r";
+};
+
+&dpmac7 {
+	phy-handle = <&mdio2_phy3>;
+	phy-connection-type = "10gbase-r";
+};
+
+&dpmac8 {
+	phy-handle = <&mdio2_phy4>;
+	phy-connection-type = "10gbase-r";
+};
+
+&emdio1 {
+	status = "disabled";
+
+	/* CS4340 PHYs */
+	mdio1_phy1: emdio1-phy@10 {
+		reg = <0x10>;
+	};
+
+	mdio1_phy2: emdio1-phy@11 {
+		reg = <0x11>;
+	};
+
+	mdio1_phy3: emdio1-phy@12 {
+		reg = <0x12>;
+	};
+
+	mdio1_phy4: emdio1-phy@13 {
+		reg = <0x13>;
+	};
+};
+
+&emdio2 {
+	/* AQR405 PHYs */
+	mdio2_phy1: emdio2-phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c45";
+		interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+		reg = <0x0>;
+	};
+
+	mdio2_phy2: emdio2-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c45";
+		interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+		reg = <0x1>;
+	};
+
+	mdio2_phy3: emdio2-phy@2 {
+		compatible = "ethernet-phy-ieee802.3-c45";
+		interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+		reg = <0x2>;
+	};
+
+	mdio2_phy4: emdio2-phy@3 {
+		compatible = "ethernet-phy-ieee802.3-c45";
+		interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+		reg = <0x3>;
+	};
+};

arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi

@@ -150,3 +150,7 @@ &pcie4 {
 	ranges = <0x81000000 0x0 0x00000000 0x16 0x00010000 0x0 0x00010000   /* downstream I/O */
 		  0x82000000 0x0 0x40000000 0x16 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
 };
+
+&timer {
+	fsl,erratum-a008585;
+};

arch/arm64/boot/dts/freescale/fsl-ls2081a-rdb.dts

+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for NXP LS2081A RDB Board.
+ *
+ * Copyright 2017 NXP
+ *
+ * Priyanka Jain <priyanka.jain@nxp.com>
+ *
+ */
+
+/dts-v1/;
+
+#include "fsl-ls2088a.dtsi"
+
+/ {
+	model = "NXP Layerscape 2081A RDB Board";
+	compatible = "fsl,ls2081a-rdb", "fsl,ls2081a";
+
+	aliases {
+		serial0 = &serial0;
+		serial1 = &serial1;
+	};
+
+	chosen {
+		stdout-path = "serial1:115200n8";
+	};
+};
+
+&dspi {
+	status = "okay";
+
+	n25q512a: flash@0 {
+		compatible = "jedec,spi-nor";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <3000000>;
+		reg = <0>;
+	};
+};
+
+&esdhc {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	pca9547: mux@75 {
+		compatible = "nxp,pca9547";
+		reg = <0x75>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x1>;
+
+			rtc@51 {
+				compatible = "nxp,pcf2129";
+				reg = <0x51>;
+			};
+		};
+
+		i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x2>;
+
+			ina220@40 {
+				compatible = "ti,ina220";
+				reg = <0x40>;
+				shunt-resistor = <500>;
+			};
+		};
+
+		i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x3>;
+
+			adt7481@4c {
+				compatible = "adi,adt7461";
+				reg = <0x4c>;
+			};
+		};
+	};
+};
+
+&ifc {
+	status = "disabled";
+};
+
+&qspi {
+	status = "okay";
+
+	s25fs512s0: flash@0 {
+		compatible = "jedec,spi-nor";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <4>;
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+
+	s25fs512s1: flash@1 {
+		compatible = "jedec,spi-nor";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <4>;
+		spi-max-frequency = <20000000>;
+		reg = <1>;
+	};
+};
+
+&sata0 {
+	status = "okay";
+};
+
+&sata1 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};

arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi

@@ -9,6 +9,27 @@
  *
  */
 
+/* Update DPMAC connections to external PHYs, under SerDes 0x2a_0x49. */
+&dpmac9 {
+	phy-handle = <&mdio0_phy12>;
+	phy-connection-type = "sgmii";
+};
+
+&dpmac10 {
+	phy-handle = <&mdio0_phy13>;
+	phy-connection-type = "sgmii";
+};
+
+&dpmac11 {
+	phy-handle = <&mdio0_phy14>;
+	phy-connection-type = "sgmii";
+};
+
+&dpmac12 {
+	phy-handle = <&mdio0_phy15>;
+	phy-connection-type = "sgmii";
+};
+
 &esdhc {
 	mmc-hs200-1_8v;
 	status = "okay";
@@ -36,9 +57,47 @@ nand@2,0 {
 	     reg = <0x2 0x0 0x10000>;
 	};
 
-	cpld@3,0 {
-	     reg = <0x3 0x0 0x10000>;
-	     compatible = "fsl,ls2080aqds-fpga", "fsl,fpga-qixis";
+	boardctrl: board-control@3,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "fsl,ls208xaqds-fpga", "fsl,fpga-qixis", "simple-mfd";
+		reg = <3 0 0x1000>;
+		ranges = <0 3 0 0x1000>;
+
+		mdio-mux-emi1@54 {
+			compatible = "mdio-mux-mmioreg", "mdio-mux";
+			mdio-parent-bus = <&emdio1>;
+			reg = <0x54 1>;		/* BRDCFG4 */
+			mux-mask = <0xe0>;	/* EMI1_MDIO */
+			#address-cells=<1>;
+			#size-cells = <0>;
+
+			/* Child MDIO buses, one for each riser card:
+			 * reg = 0x0, 0x20, 0x40, 0x60, 0x80, 0xa0.
+			 * VSC8234 PHYs on the riser cards.
+			 */
+			mdio_mux3: mdio@60 {
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				mdio0_phy12: mdio-phy0@1c {
+					reg = <0x1c>;
+				};
+
+				mdio0_phy13: mdio-phy1@1d {
+					reg = <0x1d>;
+				};
+
+				mdio0_phy14: mdio-phy2@1e {
+					reg = <0x1e>;
+				};
+
+				mdio0_phy15: mdio-phy3@1f {
+					reg = <0x1f>;
+				};
+			};
+		};
 	};
 };
 

arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi

@@ -49,6 +49,8 @@ pca9547@75 {
 		reg = <0x75>;
 		#address-cells = <1>;
 		#size-cells = <0>;
+		idle-state = <0>;
+
 		i2c@1 {
 			#address-cells = <1>;
 			#size-cells = <0>;

arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi

@@ -239,13 +239,12 @@ map0 {
 		};
 	};
 
-	timer {
+	timer: timer {
 		compatible = "arm,armv8-timer";
 		interrupts = <1 13 4>, /* Physical Secure PPI, active-low */
 			     <1 14 4>, /* Physical Non-Secure PPI, active-low */
 			     <1 11 4>, /* Virtual PPI, active-low */
 			     <1 10 4>; /* Hypervisor PPI, active-low */
-		fsl,erratum-a008585;
 	};
 
 	pmu {

arch/arm64/boot/dts/freescale/imx8-ss-ddr.dtsi

@@ -10,7 +10,7 @@ ddr_subsys: bus@5c000000 {
 	#size-cells = <1>;
 	ranges = <0x5c000000 0x0 0x5c000000 0x1000000>;
 
-	ddr-pmu@5c020000 {
+	ddr_pmu0: ddr-pmu@5c020000 {
 		compatible = "fsl,imx8-ddr-pmu";
 		reg = <0x5c020000 0x10000>;
 		interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;

arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi

@@ -111,8 +111,9 @@ uart3_lpcg: clock-controller@5a490000 {
 	i2c0: i2c@5a800000 {
 		reg = <0x5a800000 0x4000>;
 		interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&i2c0_lpcg IMX_LPCG_CLK_0>;
-		clock-names = "per";
+		clocks = <&i2c0_lpcg IMX_LPCG_CLK_0>,
+			 <&i2c0_lpcg IMX_LPCG_CLK_4>;
+		clock-names = "per", "ipg";
 		assigned-clocks = <&clk IMX_SC_R_I2C_0 IMX_SC_PM_CLK_PER>;
 		assigned-clock-rates = <24000000>;
 		power-domains = <&pd IMX_SC_R_I2C_0>;
@@ -122,8 +123,9 @@ i2c0: i2c@5a800000 {
 	i2c1: i2c@5a810000 {
 		reg = <0x5a810000 0x4000>;
 		interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&i2c1_lpcg IMX_LPCG_CLK_0>;
-		clock-names = "per";
+		clocks = <&i2c1_lpcg IMX_LPCG_CLK_0>,
+			 <&i2c1_lpcg IMX_LPCG_CLK_4>;
+		clock-names = "per", "ipg";
 		assigned-clocks = <&clk IMX_SC_R_I2C_1 IMX_SC_PM_CLK_PER>;
 		assigned-clock-rates = <24000000>;
 		power-domains = <&pd IMX_SC_R_I2C_1>;
@@ -133,8 +135,9 @@ i2c1: i2c@5a810000 {
 	i2c2: i2c@5a820000 {
 		reg = <0x5a820000 0x4000>;
 		interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&i2c2_lpcg IMX_LPCG_CLK_0>;
-		clock-names = "per";
+		clocks = <&i2c2_lpcg IMX_LPCG_CLK_0>,
+			 <&i2c2_lpcg IMX_LPCG_CLK_4>;
+		clock-names = "per", "ipg";
 		assigned-clocks = <&clk IMX_SC_R_I2C_2 IMX_SC_PM_CLK_PER>;
 		assigned-clock-rates = <24000000>;
 		power-domains = <&pd IMX_SC_R_I2C_2>;
@@ -144,8 +147,9 @@ i2c2: i2c@5a820000 {
 	i2c3: i2c@5a830000 {
 		reg = <0x5a830000 0x4000>;
 		interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&i2c3_lpcg IMX_LPCG_CLK_0>;
-		clock-names = "per";
+		clocks = <&i2c3_lpcg IMX_LPCG_CLK_0>,
+			 <&i2c3_lpcg IMX_LPCG_CLK_4>;
+		clock-names = "per", "ipg";
 		assigned-clocks = <&clk IMX_SC_R_I2C_3 IMX_SC_PM_CLK_PER>;
 		assigned-clock-rates = <24000000>;
 		power-domains = <&pd IMX_SC_R_I2C_3>;

arch/arm64/boot/dts/freescale/imx8dxl-evk.dts

+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2019~2020, 2022 NXP
+ */
+
+/dts-v1/;
+
+#include "imx8dxl.dtsi"
+
+/ {
+	model = "Freescale i.MX8DXL EVK";
+	compatible = "fsl,imx8dxl-evk", "fsl,imx8dxl";
+
+	aliases {
+		i2c2 = &i2c2;
+		mmc0 = &usdhc1;
+		mmc1 = &usdhc2;
+		serial0 = &lpuart0;
+	};
+
+	chosen {
+		stdout-path = &lpuart0;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x00000000 0x80000000 0 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/*
+		 * Memory reserved for optee usage. Please do not use.
+		 * This will be automatically added to dtb if OP-TEE is installed.
+		 * optee@96000000 {
+		 *     reg = <0 0x96000000 0 0x2000000>;
+		 *     no-map;
+		 * };
+		 */
+
+		/* global autoconfigured region for contiguous allocations */
+		linux,cma {
+			compatible = "shared-dma-pool";
+			reusable;
+			size = <0 0x14000000>;
+			alloc-ranges = <0 0x98000000 0 0x14000000>;
+			linux,cma-default;
+		};
+	};
+
+	mux3_en: regulator-0 {
+		compatible = "regulator-fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "mux3_en";
+		gpio = <&pca6416_2 8 GPIO_ACTIVE_LOW>;
+		regulator-always-on;
+	};
+
+	reg_fec1_sel: regulator-1 {
+		compatible = "regulator-fixed";
+		regulator-name = "fec1_supply";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&pca6416_1 11 GPIO_ACTIVE_LOW>;
+		regulator-always-on;
+		status = "disabled";
+	};
+
+	reg_fec1_io: regulator-2 {
+		compatible = "regulator-fixed";
+		regulator-name = "fec1_io_supply";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&max7322 0 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+		status = "disabled";
+	};
+
+	reg_usdhc2_vmmc: regulator-3 {
+		compatible = "regulator-fixed";
+		regulator-name = "SD1_SPWR";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+		gpio = <&lsio_gpio4 30 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		off-on-delay-us = <3480>;
+	};
+};
+
+&eqos {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_eqos>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy0>;
+	nvmem-cells = <&fec_mac1>;
+	nvmem-cell-names = "mac-address";
+	snps,reset-gpios = <&pca6416_1 2 GPIO_ACTIVE_LOW>;
+	snps,reset-delays-us = <10 20 200000>;
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			eee-broken-1000t;
+			qca,disable-smarteee;
+			vddio-supply = <&vddio0>;
+
+			vddio0: vddio-regulator {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+		};
+	};
+};
+
+/*
+ * fec1 shares the some PINs with usdhc2.
+ * by default usdhc2 is enabled in this dts.
+ * Please disable usdhc2 to enable fec1
+ */
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	phy-mode = "rgmii-txid";
+	phy-handle = <&ethphy1>;
+	fsl,magic-packet;
+	rx-internal-delay-ps = <2000>;
+	nvmem-cells = <&fec_mac0>;
+	nvmem-cell-names = "mac-address";
+	status = "disabled";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy1: ethernet-phy@1 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <1>;
+			reset-gpios = <&pca6416_1 0 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <10000>;
+			qca,disable-smarteee;
+			vddio-supply = <&vddio1>;
+
+			vddio1: vddio-regulator {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+		};
+	};
+};
+
+&i2c2 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	pca6416_1: gpio@20 {
+		compatible = "ti,tca6416";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	pca6416_2: gpio@21 {
+		compatible = "ti,tca6416";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	pca9548_1: i2c-mux@70 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0>;
+
+			max7322: gpio@68 {
+				compatible = "maxim,max7322";
+				reg = <0x68>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				status = "disabled";
+			};
+		};
+
+		i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x4>;
+		};
+
+		i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x5>;
+		};
+
+		i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x6>;
+		};
+	};
+};
+
+&lpuart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpuart0>;
+	status = "okay";
+};
+
+&lsio_gpio4 {
+	status = "okay";
+};
+
+&lsio_gpio5 {
+	status = "okay";
+};
+
+&thermal_zones {
+	pmic-thermal0 {
+		polling-delay-passive = <250>;
+		polling-delay = <2000>;
+		thermal-sensors = <&tsens IMX_SC_R_PMIC_0>;
+
+		trips {
+			pmic_alert0: trip0 {
+				temperature = <110000>;
+				hysteresis = <2000>;
+				type = "passive";
+			};
+
+			pmic_crit0: trip1 {
+				temperature = <125000>;
+				hysteresis = <2000>;
+				type = "critical";
+			};
+		};
+
+		cooling-maps {
+			map0 {
+				trip = <&pmic_alert0>;
+				cooling-device =
+					<&A35_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&A35_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+			};
+		};
+	};
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	bus-width = <8>;
+	no-sd;
+	no-sdio;
+	non-removable;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	bus-width = <4>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	cd-gpios = <&lsio_gpio5 1 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&lsio_gpio5 0 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			IMX8DXL_COMP_CTL_GPIO_1V8_3V3_GPIORHB_PAD	0x000514a0
+			IMX8DXL_COMP_CTL_GPIO_1V8_3V3_GPIORHK_PAD	0x000014a0
+			IMX8DXL_SPI3_CS0_ADMA_ACM_MCLK_OUT1		0x0600004c
+			IMX8DXL_SNVS_TAMPER_OUT1_LSIO_GPIO2_IO05_IN	0x0600004c
+		>;
+	};
+
+	pinctrl_usbotg1: usbotg1grp {
+		fsl,pins = <
+			IMX8DXL_USB_SS3_TC0_CONN_USB_OTG1_PWR		0x00000021
+		>;
+	};
+
+	pinctrl_usbotg2: usbotg2grp {
+		fsl,pins = <
+			IMX8DXL_USB_SS3_TC1_CONN_USB_OTG2_PWR		0x00000021
+		>;
+	};
+
+	pinctrl_eqos: eqosgrp {
+		fsl,pins = <
+			IMX8DXL_ENET0_MDC_CONN_EQOS_MDC				0x06000020
+			IMX8DXL_ENET0_MDIO_CONN_EQOS_MDIO			0x06000020
+			IMX8DXL_ENET1_RGMII_RXC_CONN_EQOS_RGMII_RXC		0x06000020
+			IMX8DXL_ENET1_RGMII_RXD0_CONN_EQOS_RGMII_RXD0		0x06000020
+			IMX8DXL_ENET1_RGMII_RXD1_CONN_EQOS_RGMII_RXD1		0x06000020
+			IMX8DXL_ENET1_RGMII_RXD2_CONN_EQOS_RGMII_RXD2		0x06000020
+			IMX8DXL_ENET1_RGMII_RXD3_CONN_EQOS_RGMII_RXD3		0x06000020
+			IMX8DXL_ENET1_RGMII_RX_CTL_CONN_EQOS_RGMII_RX_CTL	0x06000020
+			IMX8DXL_ENET1_RGMII_TXC_CONN_EQOS_RGMII_TXC		0x06000020
+			IMX8DXL_ENET1_RGMII_TXD0_CONN_EQOS_RGMII_TXD0		0x06000020
+			IMX8DXL_ENET1_RGMII_TXD1_CONN_EQOS_RGMII_TXD1		0x06000020
+			IMX8DXL_ENET1_RGMII_TXD2_CONN_EQOS_RGMII_TXD2		0x06000020
+			IMX8DXL_ENET1_RGMII_TXD3_CONN_EQOS_RGMII_TXD3		0x06000020
+			IMX8DXL_ENET1_RGMII_TX_CTL_CONN_EQOS_RGMII_TX_CTL	0x06000020
+		>;
+	};
+
+	pinctrl_fec1: fec1grp {
+		fsl,pins = <
+			IMX8DXL_COMP_CTL_GPIO_1V8_3V3_ENET_ENETB0_PAD		0x000014a0
+			IMX8DXL_COMP_CTL_GPIO_1V8_3V3_ENET_ENETB1_PAD		0x000014a0
+			IMX8DXL_ENET0_MDC_CONN_ENET0_MDC			0x06000020
+			IMX8DXL_ENET0_MDIO_CONN_ENET0_MDIO			0x06000020
+			IMX8DXL_ENET0_RGMII_RXC_CONN_ENET0_RGMII_RXC		0x00000060
+			IMX8DXL_ENET0_RGMII_RXD0_CONN_ENET0_RGMII_RXD0		0x00000060
+			IMX8DXL_ENET0_RGMII_RXD1_CONN_ENET0_RGMII_RXD1		0x00000060
+			IMX8DXL_ENET0_RGMII_RXD2_CONN_ENET0_RGMII_RXD2		0x00000060
+			IMX8DXL_ENET0_RGMII_RXD3_CONN_ENET0_RGMII_RXD3		0x00000060
+			IMX8DXL_ENET0_RGMII_RX_CTL_CONN_ENET0_RGMII_RX_CTL	0x00000060
+			IMX8DXL_ENET0_RGMII_TXC_CONN_ENET0_RGMII_TXC		0x00000060
+			IMX8DXL_ENET0_RGMII_TXD0_CONN_ENET0_RGMII_TXD0		0x00000060
+			IMX8DXL_ENET0_RGMII_TXD1_CONN_ENET0_RGMII_TXD1		0x00000060
+			IMX8DXL_ENET0_RGMII_TXD2_CONN_ENET0_RGMII_TXD2		0x00000060
+			IMX8DXL_ENET0_RGMII_TXD3_CONN_ENET0_RGMII_TXD3		0x00000060
+			IMX8DXL_ENET0_RGMII_TX_CTL_CONN_ENET0_RGMII_TX_CTL	0x00000060
+		>;
+	};
+
+	pinctrl_lpspi3: lpspi3grp {
+		fsl,pins = <
+			IMX8DXL_SPI3_SCK_ADMA_SPI3_SCK		0x6000040
+			IMX8DXL_SPI3_SDO_ADMA_SPI3_SDO		0x6000040
+			IMX8DXL_SPI3_SDI_ADMA_SPI3_SDI		0x6000040
+			IMX8DXL_SPI3_CS1_ADMA_SPI3_CS1		0x6000040
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			IMX8DXL_SPI1_SCK_ADMA_I2C2_SDA		0x06000021
+			IMX8DXL_SPI1_SDO_ADMA_I2C2_SCL		0x06000021
+		>;
+	};
+
+	pinctrl_cm40_lpuart: cm40lpuartgrp {
+		fsl,pins = <
+			IMX8DXL_ADC_IN2_M40_UART0_RX		0x06000020
+			IMX8DXL_ADC_IN3_M40_UART0_TX		0x06000020
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			IMX8DXL_SPI1_CS0_ADMA_I2C3_SDA		0x06000021
+			IMX8DXL_SPI1_SDI_ADMA_I2C3_SCL		0x06000021
+		>;
+	};
+
+	pinctrl_lpuart0: lpuart0grp {
+		fsl,pins = <
+			IMX8DXL_UART0_RX_ADMA_UART0_RX		0x06000020
+			IMX8DXL_UART0_TX_ADMA_UART0_TX		0x06000020
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			IMX8DXL_EMMC0_CLK_CONN_EMMC0_CLK	0x06000041
+			IMX8DXL_EMMC0_CMD_CONN_EMMC0_CMD	0x00000021
+			IMX8DXL_EMMC0_DATA0_CONN_EMMC0_DATA0	0x00000021
+			IMX8DXL_EMMC0_DATA1_CONN_EMMC0_DATA1	0x00000021
+			IMX8DXL_EMMC0_DATA2_CONN_EMMC0_DATA2	0x00000021
+			IMX8DXL_EMMC0_DATA3_CONN_EMMC0_DATA3	0x00000021
+			IMX8DXL_EMMC0_DATA4_CONN_EMMC0_DATA4	0x00000021
+			IMX8DXL_EMMC0_DATA5_CONN_EMMC0_DATA5	0x00000021
+			IMX8DXL_EMMC0_DATA6_CONN_EMMC0_DATA6	0x00000021
+			IMX8DXL_EMMC0_DATA7_CONN_EMMC0_DATA7	0x00000021
+			IMX8DXL_EMMC0_STROBE_CONN_EMMC0_STROBE	0x00000041
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+		fsl,pins = <
+			IMX8DXL_ENET0_RGMII_TX_CTL_LSIO_GPIO4_IO30	0x00000040 /* RESET_B */
+			IMX8DXL_ENET0_RGMII_TXD1_LSIO_GPIO5_IO00	0x00000021 /* WP */
+			IMX8DXL_ENET0_RGMII_TXD2_LSIO_GPIO5_IO01	0x00000021 /* CD */
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			IMX8DXL_ENET0_RGMII_RXC_CONN_USDHC1_CLK		0x06000041
+			IMX8DXL_ENET0_RGMII_RX_CTL_CONN_USDHC1_CMD	0x00000021
+			IMX8DXL_ENET0_RGMII_RXD0_CONN_USDHC1_DATA0	0x00000021
+			IMX8DXL_ENET0_RGMII_RXD1_CONN_USDHC1_DATA1	0x00000021
+			IMX8DXL_ENET0_RGMII_RXD2_CONN_USDHC1_DATA2	0x00000021
+			IMX8DXL_ENET0_RGMII_RXD3_CONN_USDHC1_DATA3	0x00000021
+			IMX8DXL_ENET0_RGMII_TXD0_CONN_USDHC1_VSELECT	0x00000021
+		>;
+	};
+};

arch/arm64/boot/dts/freescale/imx8dxl-ss-adma.dtsi

+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2019~2020, 2022 NXP
+ */
+
+&audio_ipg_clk {
+	clock-frequency = <160000000>;
+};
+
+&dma_ipg_clk {
+	clock-frequency = <160000000>;
+};
+
+&i2c0 {
+	compatible = "fsl,imx8dxl-lpi2c", "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c";
+	interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&i2c1 {
+	compatible = "fsl,imx8dxl-lpi2c", "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c";
+	interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&i2c2 {
+	compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c";
+	interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&i2c3 {
+	compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c";
+	interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&lpuart0 {
+	compatible = "fsl,imx8qxp-lpuart", "fsl,imx7ulp-lpuart";
+	interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&lpuart1 {
+	compatible = "fsl,imx8qxp-lpuart", "fsl,imx7ulp-lpuart";
+	interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&lpuart2 {
+	compatible = "fsl,imx8qxp-lpuart", "fsl,imx7ulp-lpuart";
+	interrupts = <GIC_SPI 230 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&lpuart3 {
+	compatible = "fsl,imx8qxp-lpuart", "fsl,imx7ulp-lpuart";
+	interrupts = <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>;
+};

arch/arm64/boot/dts/freescale/imx8dxl-ss-conn.dtsi

+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2019~2020, 2022 NXP
+ */
+
+/delete-node/ &enet1_lpcg;
+/delete-node/ &fec2;
+
+&conn_subsys {
+	conn_enet0_root_clk: clock-conn-enet0-root {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <250000000>;
+		clock-output-names = "conn_enet0_root_clk";
+	};
+
+	eqos: ethernet@5b050000 {
+		compatible = "nxp,imx8dxl-dwmac-eqos", "snps,dwmac-5.10a";
+		reg = <0x5b050000 0x10000>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "eth_wake_irq", "macirq";
+		clocks = <&eqos_lpcg IMX_LPCG_CLK_4>,
+			 <&eqos_lpcg IMX_LPCG_CLK_6>,
+			 <&eqos_lpcg IMX_LPCG_CLK_0>,
+			 <&eqos_lpcg IMX_LPCG_CLK_5>,
+			 <&eqos_lpcg IMX_LPCG_CLK_2>;
+		clock-names = "stmmaceth", "pclk", "ptp_ref", "tx", "mem";
+		assigned-clocks = <&clk IMX_SC_R_ENET_1 IMX_SC_PM_CLK_PER>;
+		assigned-clock-rates = <125000000>;
+		power-domains = <&pd IMX_SC_R_ENET_1>;
+		status = "disabled";
+	};
+
+	usbotg2: usb@5b0e0000 {
+		compatible = "fsl,imx8dxl-usb", "fsl,imx7ulp-usb";
+		reg = <0x5b0e0000 0x200>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
+		fsl,usbphy = <&usbphy2>;
+		fsl,usbmisc = <&usbmisc2 0>;
+		/*
+		 * usbotg1 and usbotg2 share one clcok.
+		 * scu firmware disables the access to the clock and keeps
+		 * it always on in case other core (M4) uses one of these.
+		 */
+		clocks = <&clk_dummy>;
+		ahb-burst-config = <0x0>;
+		tx-burst-size-dword = <0x10>;
+		rx-burst-size-dword = <0x10>;
+		#stream-id-cells = <1>;
+		power-domains = <&pd IMX_SC_R_USB_1>;
+		status = "disabled";
+
+		clk_dummy: clock-dummy {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+			clock-output-names = "clk_dummy";
+		};
+	};
+
+	usbmisc2: usbmisc@5b0e0200 {
+		#index-cells = <1>;
+		compatible = "fsl,imx7ulp-usbmisc";
+		reg = <0x5b0e0200 0x200>;
+	};
+
+	usbphy2: usbphy@0x5b110000 {
+		compatible = "fsl,imx8dxl-usbphy", "fsl,imx7ulp-usbphy";
+		reg = <0x5b110000 0x1000>;
+		clocks = <&usb2_2_lpcg IMX_LPCG_CLK_7>;
+		power-domains = <&pd IMX_SC_R_USB_1_PHY>;
+		status = "disabled";
+	};
+
+	eqos_lpcg: clock-controller@5b240000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5b240000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&conn_enet0_root_clk>,
+			 <&conn_axi_clk>,
+			 <&conn_axi_clk>,
+			 <&clk IMX_SC_R_ENET_1 IMX_SC_PM_CLK_PER>,
+			 <&conn_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_2>,
+				<IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_5>,
+				<IMX_LPCG_CLK_6>;
+		clock-output-names = "eqos_ptp",
+				     "eqos_mem_clk",
+				     "eqos_aclk",
+				     "eqos_clk",
+				     "eqos_csr_clk";
+		power-domains = <&pd IMX_SC_R_ENET_1>;
+	};
+
+	usb2_2_lpcg: clock-controller@5b280000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5b280000 0x10000>;
+		#clock-cells = <1>;
+		clock-indices = <IMX_LPCG_CLK_7>;
+		clocks = <&conn_ipg_clk>;
+		clock-output-names = "usboh3_2_phy_ipg_clk";
+		power-domains = <&pd IMX_SC_R_USB_1_PHY>;
+	};
+
+};
+
+&enet0_lpcg {
+	clocks = <&conn_enet0_root_clk>,
+		 <&conn_enet0_root_clk>,
+		 <&conn_axi_clk>,
+		 <&clk IMX_SC_R_ENET_0 IMX_SC_C_TXCLK>,
+		 <&conn_ipg_clk>,
+		 <&conn_ipg_clk>;
+};
+
+&fec1 {
+	compatible = "fsl,imx8qm-fec";
+	interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
+	assigned-clocks = <&clk IMX_SC_R_ENET_0 IMX_SC_C_CLKDIV>;
+	assigned-clock-rates = <125000000>;
+};
+
+&usdhc1 {
+	compatible = "fsl,imx8dxl-usdhc", "fsl,imx8qxp-usdhc";
+	interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&usdhc2 {
+	compatible = "fsl,imx8dxl-usdhc", "fsl,imx8qxp-usdhc";
+	interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&usdhc3 {
+	compatible = "fsl,imx8dxl-usdhc", "fsl,imx8qxp-usdhc";
+	interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+};

arch/arm64/boot/dts/freescale/imx8dxl-ss-ddr.dtsi

+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2020 NXP
+ */
+
+&ddr_pmu0 {
+	compatible = "fsl,imx8-ddr-pmu";
+	interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+};

arch/arm64/boot/dts/freescale/imx8dxl-ss-lsio.dtsi

+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2019~2020, 2022 NXP
+ */
+
+&lsio_gpio0 {
+	compatible = "fsl,imx8dxl-gpio", "fsl,imx35-gpio";
+	interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&lsio_gpio1 {
+	compatible = "fsl,imx8dxl-gpio", "fsl,imx35-gpio";
+	interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&lsio_gpio2 {
+	compatible = "fsl,imx8dxl-gpio", "fsl,imx35-gpio";
+	interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&lsio_gpio3 {
+	compatible = "fsl,imx8dxl-gpio", "fsl,imx35-gpio";
+	interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&lsio_gpio4 {
+	compatible = "fsl,imx8dxl-gpio", "fsl,imx35-gpio";
+	interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&lsio_gpio5 {
+	compatible = "fsl,imx8dxl-gpio", "fsl,imx35-gpio";
+	interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&lsio_gpio6 {
+	compatible = "fsl,imx8dxl-gpio", "fsl,imx35-gpio";
+	interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&lsio_gpio7 {
+	compatible = "fsl,imx8dxl-gpio", "fsl,imx35-gpio";
+	interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&lsio_mu0 {
+	compatible = "fsl,imx8qxp-mu", "fsl,imx6sx-mu";
+	interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&lsio_mu1 {
+	compatible = "fsl,imx8-mu-scu", "fsl,imx8qxp-mu", "fsl,imx6sx-mu";
+	interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&lsio_mu2 {
+	compatible = "fsl,imx8-mu-scu", "fsl,imx8qxp-mu", "fsl,imx6sx-mu";
+	interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&lsio_mu3 {
+	compatible = "fsl,imx8-mu-scu", "fsl,imx8qxp-mu", "fsl,imx6sx-mu";
+	interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&lsio_mu4 {
+	compatible = "fsl,imx8-mu-scu", "fsl,imx8qxp-mu", "fsl,imx6sx-mu";
+	interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&lsio_mu5 {
+	compatible = "fsl,imx8qxp-mu", "fsl,imx6sx-mu";
+	interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+};

arch/arm64/boot/dts/freescale/imx8dxl.dtsi

+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2019~2020, 2022 NXP
+ */
+
+#include <dt-bindings/clock/imx8-clock.h>
+#include <dt-bindings/firmware/imx/rsrc.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/pads-imx8dxl.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		ethernet0 = &fec1;
+		ethernet1 = &eqos;
+		gpio0 = &lsio_gpio0;
+		gpio1 = &lsio_gpio1;
+		gpio2 = &lsio_gpio2;
+		gpio3 = &lsio_gpio3;
+		gpio4 = &lsio_gpio4;
+		gpio5 = &lsio_gpio5;
+		gpio6 = &lsio_gpio6;
+		gpio7 = &lsio_gpio7;
+		mu1 = &lsio_mu1;
+	};
+
+	cpus: cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		/* We have 1 clusters with 2 Cortex-A35 cores */
+		A35_0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a35";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+			next-level-cache = <&A35_L2>;
+			clocks = <&clk IMX_SC_R_A35 IMX_SC_PM_CLK_CPU>;
+			#cooling-cells = <2>;
+			operating-points-v2 = <&a35_opp_table>;
+		};
+
+		A35_1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a35";
+			reg = <0x0 0x1>;
+			enable-method = "psci";
+			next-level-cache = <&A35_L2>;
+			clocks = <&clk IMX_SC_R_A35 IMX_SC_PM_CLK_CPU>;
+			#cooling-cells = <2>;
+			operating-points-v2 = <&a35_opp_table>;
+		};
+
+		A35_L2: l2-cache0 {
+			compatible = "cache";
+		};
+	};
+
+	a35_opp_table: opp-table {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-900000000 {
+			opp-hz = /bits/ 64 <900000000>;
+			opp-microvolt = <1000000>;
+			clock-latency-ns = <150000>;
+		};
+
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <1100000>;
+			clock-latency-ns = <150000>;
+			opp-suspend;
+		};
+	};
+
+	gic: interrupt-controller@51a00000 {
+		compatible = "arm,gic-v3";
+		reg = <0x0 0x51a00000 0 0x10000>, /* GIC Dist */
+		      <0x0 0x51b00000 0 0xc0000>; /* GICR (RD_base + SGI_base) */
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		dsp_reserved: dsp@92400000 {
+			reg = <0 0x92400000 0 0x2000000>;
+			no-map;
+		};
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	system-controller {
+		compatible = "fsl,imx-scu";
+		mbox-names = "tx0",
+			     "rx0",
+			     "gip3";
+		mboxes = <&lsio_mu1 0 0
+			  &lsio_mu1 1 0
+			  &lsio_mu1 3 3>;
+
+		pd: power-controller {
+			compatible = "fsl,scu-pd";
+			#power-domain-cells = <1>;
+			wakeup-irq = <160 163 235 236 237 228 229 230 231 238
+				     239 240 166 169>;
+		};
+
+		clk: clock-controller {
+			compatible = "fsl,imx8dxl-clk", "fsl,scu-clk";
+			#clock-cells = <2>;
+			clocks = <&xtal32k &xtal24m>;
+			clock-names = "xtal_32KHz", "xtal_24Mhz";
+		};
+
+		iomuxc: pinctrl {
+			compatible = "fsl,imx8dxl-iomuxc";
+		};
+
+		ocotp: ocotp {
+			compatible = "fsl,imx8qxp-scu-ocotp";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			fec_mac0: mac@2c4 {
+				reg = <0x2c4 6>;
+			};
+
+			fec_mac1: mac@2c6 {
+				reg = <0x2c6 6>;
+			};
+		};
+
+		rtc: rtc {
+			compatible = "fsl,imx8qxp-sc-rtc";
+		};
+
+		sc_pwrkey: keys {
+			compatible = "fsl,imx8qxp-sc-key", "fsl,imx-sc-key";
+			linux,keycode = <KEY_POWER>;
+			wakeup-source;
+		};
+
+		watchdog {
+			compatible = "fsl,imx-sc-wdt";
+			timeout-sec = <60>;
+		};
+
+		tsens: thermal-sensor {
+			compatible = "fsl,imx-sc-thermal";
+			#thermal-sensor-cells = <1>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, /* Physical Secure */
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, /* Physical Non-Secure */
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, /* Virtual */
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; /* Hypervisor */
+	};
+
+	thermal_zones: thermal-zones {
+		cpu-thermal0 {
+			polling-delay-passive = <250>;
+			polling-delay = <2000>;
+			thermal-sensors = <&tsens IMX_SC_R_SYSTEM>;
+
+			trips {
+				cpu_alert0: trip0 {
+					temperature = <107000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu_crit0: trip1 {
+					temperature = <127000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert0>;
+					cooling-device =
+					<&A35_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&A35_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+
+	/* The two values below cannot be changed by the board */
+	xtal32k: clock-xtal32k {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "xtal_32KHz";
+	};
+
+	xtal24m: clock-xtal24m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		clock-output-names = "xtal_24MHz";
+	};
+
+	/* sorted in register address */
+	#include "imx8-ss-adma.dtsi"
+	#include "imx8-ss-conn.dtsi"
+	#include "imx8-ss-ddr.dtsi"
+	#include "imx8-ss-lsio.dtsi"
+};
+
+#include "imx8dxl-ss-adma.dtsi"
+#include "imx8dxl-ss-conn.dtsi"
+#include "imx8dxl-ss-lsio.dtsi"
+#include "imx8dxl-ss-ddr.dtsi"

arch/arm64/boot/dts/freescale/imx8mm-icore-mx8mm.dtsi

@@ -2,7 +2,7 @@
 /*
  * Copyright (c) 2018 NXP
  * Copyright (c) 2019 Engicam srl
- * Copyright (c) 2020 Amarula Solutons(India)
+ * Copyright (c) 2020 Amarula Solutions(India)
  */
 
 / {

arch/arm64/boot/dts/freescale/imx8mm-kontron-bl-osm-s.dts

+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright (C) 2022 Kontron Electronics GmbH
+ */
+
+/dts-v1/;
+
+#include "imx8mm-kontron-osm-s.dtsi"
+
+/ {
+	model = "Kontron BL i.MX8MM OSM-S (N802X S)";
+	compatible = "kontron,imx8mm-bl-osm-s", "kontron,imx8mm-osm-s", "fsl,imx8mm";
+
+	aliases {
+		ethernet1 = &usbnet;
+	};
+
+	/* fixed crystal dedicated to mcp2542fd */
+	osc_can: clock-osc-can {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <40000000>;
+		clock-output-names = "osc-can";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_led>;
+
+		led1 {
+			label = "led1";
+			gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led2 {
+			label = "led2";
+			gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
+		};
+
+		led3 {
+			label = "led3";
+			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	pwm-beeper {
+		compatible = "pwm-beeper";
+		pwms = <&pwm2 0 5000 0>;
+	};
+
+	reg_rst_eth2: regulator-rst-eth2 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usb_eth2>;
+		gpio = <&gpio3 2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+		regulator-name = "rst-usb-eth2";
+	};
+
+	reg_usb1_vbus: regulator-usb1-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usb1_vbus>;
+		gpio = <&gpio3 25 GPIO_ACTIVE_LOW>;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-name = "usb1-vbus";
+	};
+
+	reg_vdd_5v: regulator-5v {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-name = "vdd-5v";
+	};
+};
+
+&ecspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	can@0 {
+		compatible = "microchip,mcp251xfd";
+		reg = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_can>;
+		clocks = <&osc_can>;
+		interrupts-extended = <&gpio4 28 IRQ_TYPE_LEVEL_LOW>;
+		/*
+		 * Limit the SPI clock to 15 MHz to prevent issues
+		 * with corrupted data due to chip errata.
+		 */
+		spi-max-frequency = <15000000>;
+		vdd-supply = <&reg_vdd_3v3>;
+		xceiver-supply = <&reg_vdd_5v>;
+	};
+};
+
+&ecspi3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi3>;
+	cs-gpios = <&gpio5 25 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	eeram@0 {
+		compatible = "microchip,48l640";
+		reg = <0>;
+		spi-max-frequency = <20000000>;
+	};
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-connection-type = "rgmii-rxid";
+	phy-handle = <&ethphy>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy: ethernet-phy@0 {
+			reg = <0>;
+			reset-assert-us = <1>;
+			reset-deassert-us = <15000>;
+			reset-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&gpio1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio1>;
+	gpio-line-names = "", "", "", "dio1-out", "", "", "dio1-in", "dio2-out",
+			  "dio2-in", "dio3-out", "dio3-in", "dio4-out", "", "", "", "",
+			  "", "", "", "", "", "", "", "",
+			  "", "", "", "", "", "", "", "";
+};
+
+&gpio5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio5>;
+	gpio-line-names = "", "", "dio4-in", "", "", "", "", "",
+			  "", "", "", "", "", "", "", "",
+			  "", "", "", "", "", "", "", "",
+			  "", "", "", "", "", "", "", "";
+};
+
+&i2c4 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	status = "okay";
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	linux,rs485-enabled-at-boot-time;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usbotg1 {
+	dr_mode = "otg";
+	disable-over-current;
+	vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
+
+&usbotg2 {
+	dr_mode = "host";
+	disable-over-current;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	usb1@1 {
+		compatible = "usb424,9514";
+		reg = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		usbnet: ethernet@1 {
+			compatible = "usb424,ec00";
+			reg = <1>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+		};
+	};
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+	vmmc-supply = <&reg_vdd_3v3>;
+	vqmmc-supply = <&reg_nvcc_sd>;
+	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_can: cangrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI3_RXFS_GPIO4_IO28		0x19
+		>;
+	};
+
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_ECSPI2_MISO_ECSPI2_MISO		0x82
+			MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI		0x82
+			MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK		0x82
+			MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13		0x19
+		>;
+	};
+
+	pinctrl_ecspi3: ecspi3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART2_RXD_ECSPI3_MISO		0x82
+			MX8MM_IOMUXC_UART1_TXD_ECSPI3_MOSI		0x82
+			MX8MM_IOMUXC_UART1_RXD_ECSPI3_SCLK		0x82
+			MX8MM_IOMUXC_UART2_TXD_GPIO5_IO25		0x19
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_ENET_MDC_ENET1_MDC			0x3
+			MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO		0x3
+			MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3		0x1f
+			MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2		0x1f
+			MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1		0x1f
+			MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0		0x1f
+			MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3		0x91
+			MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2		0x91
+			MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1		0x91
+			MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0		0x91
+			MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC		0x1f
+			MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC		0x91
+			MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x91
+			MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x1f
+			MX8MM_IOMUXC_GPIO1_IO01_GPIO1_IO1		0x19 /* PHY RST */
+			MX8MM_IOMUXC_GPIO1_IO05_GPIO1_IO5		0x19 /* ETH IRQ */
+		>;
+	};
+
+	pinctrl_gpio_led: gpioledgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO12_GPIO1_IO12		0x19
+			MX8MM_IOMUXC_GPIO1_IO13_GPIO1_IO13		0x19
+			MX8MM_IOMUXC_GPIO1_IO14_GPIO1_IO14		0x19
+		>;
+	};
+
+	pinctrl_gpio1: gpio1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3		0x19
+			MX8MM_IOMUXC_GPIO1_IO07_GPIO1_IO7		0x19
+			MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9		0x19
+			MX8MM_IOMUXC_GPIO1_IO11_GPIO1_IO11		0x19
+			MX8MM_IOMUXC_GPIO1_IO06_GPIO1_IO6		0x19
+			MX8MM_IOMUXC_GPIO1_IO08_GPIO1_IO8		0x19
+			MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10		0x19
+		>;
+	};
+
+	pinctrl_gpio5: gpio5grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI3_MCLK_GPIO5_IO2		0x19
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL			0x400001c3
+			MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA			0x400001c3
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SPDIF_RX_PWM2_OUT			0x19
+		>;
+	};
+
+	pinctrl_reg_usb1_vbus: regusb1vbusgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI5_MCLK_GPIO3_IO25		0x19
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI2_RXC_UART1_DCE_RX		0x140
+			MX8MM_IOMUXC_SAI2_RXFS_UART1_DCE_TX		0x140
+			MX8MM_IOMUXC_SAI2_RXD0_UART1_DCE_RTS_B		0x140
+			MX8MM_IOMUXC_SAI2_TXFS_UART1_DCE_CTS_B		0x140
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI3_TXFS_UART2_DCE_RX		0x140
+			MX8MM_IOMUXC_SAI3_TXC_UART2_DCE_TX		0x140
+			MX8MM_IOMUXC_SAI3_RXD_UART2_DCE_RTS_B		0x140
+			MX8MM_IOMUXC_SAI3_RXC_UART2_DCE_CTS_B		0x140
+		>;
+	};
+
+	pinctrl_usb_eth2: usbeth2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_CE1_B_GPIO3_IO2		0x19
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK			0x190
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD			0x1d0
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x1d0
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d0
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d0
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d0
+			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12		0x019
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0x1d0
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK			0x194
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD			0x1d4
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x1d4
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d4
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d4
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d4
+			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12		0x019
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0x1d0
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK			0x196
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD			0x1d6
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x1d6
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d6
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d6
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d6
+			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12		0x019
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0x1d0
+		>;
+	};
+};

arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-s.dts → arch/arm64/boot/dts/freescale/imx8mm-kontron-bl.dts

@@ -5,11 +5,11 @@
 
 /dts-v1/;
 
-#include "imx8mm-kontron-n801x-som.dtsi"
+#include "imx8mm-kontron-sl.dtsi"
 
 / {
-	model = "Kontron i.MX8MM N801X S";
-	compatible = "kontron,imx8mm-n801x-s", "kontron,imx8mm-n801x-som", "fsl,imx8mm";
+	model = "Kontron BL i.MX8MM (N801X S)";
+	compatible = "kontron,imx8mm-bl", "kontron,imx8mm-sl", "fsl,imx8mm";
 
 	aliases {
 		ethernet1 = &usbnet;
@@ -321,6 +321,7 @@ MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d0
 			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d0
 			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d0
 			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12		0x019
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0x1d0
 		>;
 	};
 
@@ -333,6 +334,7 @@ MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d4
 			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d4
 			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d4
 			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12		0x019
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0x1d0
 		>;
 	};
 
@@ -345,6 +347,7 @@ MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d6
 			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d6
 			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d6
 			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12		0x019
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0x1d0
 		>;
 	};
 };

arch/arm64/boot/dts/freescale/imx8mm-kontron-osm-s.dtsi

+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright (C) 2022 Kontron Electronics GmbH
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "imx8mm.dtsi"
+
+/ {
+	model = "Kontron OSM-S i.MX8MM (N802X SOM)";
+	compatible = "kontron,imx8mm-osm-s", "fsl,imx8mm";
+
+	memory@40000000 {
+		device_type = "memory";
+		/*
+		 * There are multiple SoM flavors with different DDR sizes.
+		 * The smallest is 1GB. For larger sizes the bootloader will
+		 * update the reg property.
+		 */
+		reg = <0x0 0x40000000 0 0x80000000>;
+	};
+
+	chosen {
+		stdout-path = &uart3;
+	};
+};
+
+&A53_0 {
+	cpu-supply = <&reg_vdd_arm>;
+};
+
+&A53_1 {
+	cpu-supply = <&reg_vdd_arm>;
+};
+
+&A53_2 {
+	cpu-supply = <&reg_vdd_arm>;
+};
+
+&A53_3 {
+	cpu-supply = <&reg_vdd_arm>;
+};
+
+&ddrc {
+	operating-points-v2 = <&ddrc_opp_table>;
+
+	ddrc_opp_table: opp-table {
+		compatible = "operating-points-v2";
+
+		opp-100M {
+			opp-hz = /bits/ 64 <100000000>;
+		};
+
+		opp-750M {
+			opp-hz = /bits/ 64 <750000000>;
+		};
+	};
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "mxicy,mx25r1635f", "jedec,spi-nor";
+		spi-max-frequency = <80000000>;
+		reg = <0>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x0 0x1e0000>;
+			};
+
+			partition@1e0000 {
+				label = "env";
+				reg = <0x1e0000 0x10000>;
+			};
+
+			partition@1f0000 {
+				label = "env_redundant";
+				reg = <0x1f0000 0x10000>;
+			};
+		};
+	};
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	pca9450: pmic@25 {
+		compatible = "nxp,pca9450a";
+		reg = <0x25>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+
+		regulators {
+			reg_vdd_soc: BUCK1 {
+				regulator-name = "+0V8_VDD_SOC (BUCK1)";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <850000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+				nxp,dvs-run-voltage = <850000>;
+				nxp,dvs-standby-voltage = <800000>;
+			};
+
+			reg_vdd_arm: BUCK2 {
+				regulator-name = "+0V9_VDD_ARM (BUCK2)";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <950000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+				nxp,dvs-run-voltage = <950000>;
+				nxp,dvs-standby-voltage = <850000>;
+			};
+
+			reg_vdd_dram: BUCK3 {
+				regulator-name = "+0V9_VDD_DRAM&PU (BUCK3)";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <950000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_vdd_3v3: BUCK4 {
+				regulator-name = "+3V3 (BUCK4)";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_vdd_1v8: BUCK5 {
+				regulator-name = "+1V8 (BUCK5)";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_nvcc_dram: BUCK6 {
+				regulator-name = "+1V1_NVCC_DRAM (BUCK6)";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_nvcc_snvs: LDO1 {
+				regulator-name = "+1V8_NVCC_SNVS (LDO1)";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_vdd_snvs: LDO2 {
+				regulator-name = "+0V8_VDD_SNVS (LDO2)";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_vdda: LDO3 {
+				regulator-name = "+1V8_VDDA (LDO3)";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_vdd_phy: LDO4 {
+				regulator-name = "+0V9_VDD_PHY (LDO4)";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_nvcc_sd: LDO5 {
+				regulator-name = "NVCC_SD (LDO5)";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+		};
+	};
+
+	rtc@52 {
+		compatible = "microcrystal,rv3028";
+		reg = <0x52>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_rtc>;
+		interrupts-extended = <&gpio4 1 IRQ_TYPE_LEVEL_HIGH>;
+		trickle-diode-disable;
+	};
+};
+
+&uart3 { /* console */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	vmmc-supply = <&reg_vdd_3v3>;
+	vqmmc-supply = <&reg_vdd_1v8>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_ECSPI1_MISO_ECSPI1_MISO		0x82
+			MX8MM_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI		0x82
+			MX8MM_IOMUXC_ECSPI1_SCLK_ECSPI1_SCLK		0x82
+			MX8MM_IOMUXC_ECSPI1_SS0_GPIO5_IO9		0x19
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL			0x400001c3
+			MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA			0x400001c3
+		>;
+	};
+
+	pinctrl_pmic: pmicgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO00_GPIO1_IO0		0x141
+		>;
+	};
+
+	pinctrl_rtc: rtcgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI1_RXC_GPIO4_IO1			0x19
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART3_RXD_UART3_DCE_RX		0x140
+			MX8MM_IOMUXC_UART3_TXD_UART3_DCE_TX		0x140
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK			0x190
+			MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD			0x1d0
+			MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0		0x1d0
+			MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1		0x1d0
+			MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2		0x1d0
+			MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3		0x1d0
+			MX8MM_IOMUXC_SD1_DATA4_USDHC1_DATA4		0x1d0
+			MX8MM_IOMUXC_SD1_DATA5_USDHC1_DATA5		0x1d0
+			MX8MM_IOMUXC_SD1_DATA6_USDHC1_DATA6		0x1d0
+			MX8MM_IOMUXC_SD1_DATA7_USDHC1_DATA7		0x1d0
+			MX8MM_IOMUXC_SD1_RESET_B_USDHC1_RESET_B		0x019
+			MX8MM_IOMUXC_SD1_STROBE_USDHC1_STROBE		0x190
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK			0x194
+			MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD			0x1d4
+			MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0		0x1d4
+			MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1		0x1d4
+			MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2		0x1d4
+			MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3		0x1d4
+			MX8MM_IOMUXC_SD1_DATA4_USDHC1_DATA4		0x1d4
+			MX8MM_IOMUXC_SD1_DATA5_USDHC1_DATA5		0x1d4
+			MX8MM_IOMUXC_SD1_DATA6_USDHC1_DATA6		0x1d4
+			MX8MM_IOMUXC_SD1_DATA7_USDHC1_DATA7		0x1d4
+			MX8MM_IOMUXC_SD1_RESET_B_USDHC1_RESET_B		0x019
+			MX8MM_IOMUXC_SD1_STROBE_USDHC1_STROBE		0x194
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK			0x196
+			MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD			0x1d6
+			MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0		0x1d6
+			MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1		0x1d6
+			MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2		0x1d6
+			MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3		0x1d6
+			MX8MM_IOMUXC_SD1_DATA4_USDHC1_DATA4		0x1d6
+			MX8MM_IOMUXC_SD1_DATA5_USDHC1_DATA5		0x1d6
+			MX8MM_IOMUXC_SD1_DATA6_USDHC1_DATA6		0x1d6
+			MX8MM_IOMUXC_SD1_DATA7_USDHC1_DATA7		0x1d6
+			MX8MM_IOMUXC_SD1_RESET_B_USDHC1_RESET_B		0x019
+			MX8MM_IOMUXC_SD1_STROBE_USDHC1_STROBE		0x196
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B		0xc6
+		>;
+	};
+};

arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-som.dtsi → arch/arm64/boot/dts/freescale/imx8mm-kontron-sl.dtsi

@@ -6,8 +6,8 @@
 #include "imx8mm.dtsi"
 
 / {
-	model = "Kontron i.MX8MM N801X SoM";
-	compatible = "kontron,imx8mm-n801x-som", "fsl,imx8mm";
+	model = "Kontron SL i.MX8MM (N801X SOM)";
+	compatible = "kontron,imx8mm-sl", "fsl,imx8mm";
 
 	memory@40000000 {
 		device_type = "memory";
@@ -46,10 +46,6 @@ &ddrc {
 	ddrc_opp_table: opp-table {
 		compatible = "operating-points-v2";
 
-		opp-25M {
-			opp-hz = /bits/ 64 <25000000>;
-		};
-
 		opp-100M {
 			opp-hz = /bits/ 64 <100000000>;
 		};
@@ -70,6 +66,27 @@ flash@0 {
 		compatible = "mxicy,mx25r1635f", "jedec,spi-nor";
 		spi-max-frequency = <80000000>;
 		reg = <0>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x0 0x1e0000>;
+			};
+
+			partition@1e0000 {
+				label = "env";
+				reg = <0x1e0000 0x10000>;
+			};
+
+			partition@1f0000 {
+				label = "env_redundant";
+				reg = <0x1f0000 0x10000>;
+			};
+		};
 	};
 };
 
@@ -86,11 +103,10 @@ pca9450: pmic@25 {
 		pinctrl-0 = <&pinctrl_pmic>;
 		interrupt-parent = <&gpio1>;
 		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
-		sd-vsel-gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
 
 		regulators {
 			reg_vdd_soc: BUCK1 {
-				regulator-name = "buck1";
+				regulator-name = "+0V8_VDD_SOC (BUCK1)";
 				regulator-min-microvolt = <800000>;
 				regulator-max-microvolt = <850000>;
 				regulator-boot-on;
@@ -101,7 +117,7 @@ reg_vdd_soc: BUCK1 {
 			};
 
 			reg_vdd_arm: BUCK2 {
-				regulator-name = "buck2";
+				regulator-name = "+0V9_VDD_ARM (BUCK2)";
 				regulator-min-microvolt = <850000>;
 				regulator-max-microvolt = <950000>;
 				regulator-boot-on;
@@ -112,7 +128,7 @@ reg_vdd_arm: BUCK2 {
 			};
 
 			reg_vdd_dram: BUCK3 {
-				regulator-name = "buck3";
+				regulator-name = "+0V9_VDD_DRAM&PU (BUCK3)";
 				regulator-min-microvolt = <850000>;
 				regulator-max-microvolt = <950000>;
 				regulator-boot-on;
@@ -120,7 +136,7 @@ reg_vdd_dram: BUCK3 {
 			};
 
 			reg_vdd_3v3: BUCK4 {
-				regulator-name = "buck4";
+				regulator-name = "+3V3 (BUCK4)";
 				regulator-min-microvolt = <3300000>;
 				regulator-max-microvolt = <3300000>;
 				regulator-boot-on;
@@ -128,7 +144,7 @@ reg_vdd_3v3: BUCK4 {
 			};
 
 			reg_vdd_1v8: BUCK5 {
-				regulator-name = "buck5";
+				regulator-name = "+1V8 (BUCK5)";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
 				regulator-boot-on;
@@ -136,7 +152,7 @@ reg_vdd_1v8: BUCK5 {
 			};
 
 			reg_nvcc_dram: BUCK6 {
-				regulator-name = "buck6";
+				regulator-name = "+1V1_NVCC_DRAM (BUCK6)";
 				regulator-min-microvolt = <1100000>;
 				regulator-max-microvolt = <1100000>;
 				regulator-boot-on;
@@ -144,7 +160,7 @@ reg_nvcc_dram: BUCK6 {
 			};
 
 			reg_nvcc_snvs: LDO1 {
-				regulator-name = "ldo1";
+				regulator-name = "+1V8_NVCC_SNVS (LDO1)";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
 				regulator-boot-on;
@@ -152,7 +168,7 @@ reg_nvcc_snvs: LDO1 {
 			};
 
 			reg_vdd_snvs: LDO2 {
-				regulator-name = "ldo2";
+				regulator-name = "+0V8_VDD_SNVS (LDO2)";
 				regulator-min-microvolt = <800000>;
 				regulator-max-microvolt = <900000>;
 				regulator-boot-on;
@@ -160,7 +176,7 @@ reg_vdd_snvs: LDO2 {
 			};
 
 			reg_vdda: LDO3 {
-				regulator-name = "ldo3";
+				regulator-name = "+1V8_VDDA (LDO3)";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
 				regulator-boot-on;
@@ -168,7 +184,7 @@ reg_vdda: LDO3 {
 			};
 
 			reg_vdd_phy: LDO4 {
-				regulator-name = "ldo4";
+				regulator-name = "+0V9_VDD_PHY (LDO4)";
 				regulator-min-microvolt = <900000>;
 				regulator-max-microvolt = <900000>;
 				regulator-boot-on;
@@ -176,7 +192,7 @@ reg_vdd_phy: LDO4 {
 			};
 
 			reg_nvcc_sd: LDO5 {
-				regulator-name = "ldo5";
+				regulator-name = "NVCC_SD (LDO5)";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <3300000>;
 			};
@@ -229,7 +245,6 @@ MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA			0x400001c3
 	pinctrl_pmic: pmicgrp {
 		fsl,pins = <
 			MX8MM_IOMUXC_GPIO1_IO00_GPIO1_IO0		0x141
-			MX8MM_IOMUXC_GPIO1_IO04_GPIO1_IO4		0x141
 		>;
 	};
 

arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x.dts

@@ -17,4 +17,3 @@ chosen {
 		stdout-path = &uart2;
 	};
 };
-

arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts

@@ -222,7 +222,6 @@ can@0 {
 		compatible = "microchip,mcp2515";
 		reg = <0>;
 		clocks = <&can20m>;
-		oscillator-frequency = <20000000>;
 		interrupt-parent = <&gpio2>;
 		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
 		spi-max-frequency = <10000000>;

arch/arm64/boot/dts/freescale/imx8mm-venice-gw7903.dts

@@ -250,7 +250,7 @@ &gpio1 {
 };
 
 &gpio2 {
-	gpio-line-names = "dig2_in", "dig2_out#", "", "", "", "", "", "",
+	gpio-line-names = "dig2_in", "dig2_out#", "dig2_ctl", "", "", "", "dig1_ctl", "",
 		"dig1_out#", "dig1_in", "", "", "", "", "", "",
 		"", "", "", "", "", "", "", "",
 		"", "", "", "", "", "", "", "";
@@ -630,6 +630,8 @@ MX8MM_IOMUXC_GPIO1_IO11_GPIO1_IO11	0x40000041 /* RS485# */
 			MX8MM_IOMUXC_GPIO1_IO12_GPIO1_IO12	0x40000041 /* RS232# */
 			MX8MM_IOMUXC_SD1_DATA7_GPIO2_IO9	0x40000041 /* DIG1_IN */
 			MX8MM_IOMUXC_SD1_DATA6_GPIO2_IO8	0x40000041 /* DIG1_OUT */
+			MX8MM_IOMUXC_SD1_DATA4_GPIO2_IO6	0x40000041 /* DIG1_CTL */
+			MX8MM_IOMUXC_SD1_DATA0_GPIO2_IO2	0x40000041 /* DIG2_CTL */
 			MX8MM_IOMUXC_SD1_CLK_GPIO2_IO0		0x40000041 /* DIG2_IN */
 			MX8MM_IOMUXC_SD1_CMD_GPIO2_IO1		0x40000041 /* DIG2_OUT */
 			MX8MM_IOMUXC_ECSPI1_MOSI_GPIO5_IO7	0x40000041 /* SIM1DET# */

arch/arm64/boot/dts/freescale/imx8mm-venice-gw7904.dts

+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Gateworks Corporation
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/phy/phy-imx8-pcie.h>
+
+#include "imx8mm.dtsi"
+
+/ {
+	model = "Gateworks Venice GW7904 i.MX8MM board";
+	compatible = "gateworks,imx8mm-gw7904", "fsl,imx8mm";
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x0 0x40000000 0 0x80000000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-0 {
+			label = "user_pb";
+			gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_0>;
+		};
+
+		key-1 {
+			label = "user_pb1x";
+			linux,code = <BTN_1>;
+			interrupt-parent = <&gsc>;
+			interrupts = <0>;
+		};
+
+		key-2 {
+			label = "key_erased";
+			linux,code = <BTN_2>;
+			interrupt-parent = <&gsc>;
+			interrupts = <1>;
+		};
+
+		key-3 {
+			label = "eeprom_wp";
+			linux,code = <BTN_3>;
+			interrupt-parent = <&gsc>;
+			interrupts = <2>;
+		};
+
+		key-4 {
+			label = "switch_hold";
+			linux,code = <BTN_5>;
+			interrupt-parent = <&gsc>;
+			interrupts = <7>;
+		};
+	};
+
+	led-controller {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led-0 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			label = "led01_grn";
+			gpios = <&gpioled 0 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-1 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_YELLOW>;
+			label = "led01_yel";
+			gpios = <&gpioled 1 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-2 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			label = "led02_grn";
+			gpios = <&gpioled 2 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-3 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_YELLOW>;
+			label = "led02_yel";
+			gpios = <&gpioled 3 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-4 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			label = "led03_grn";
+			gpios = <&gpioled 4 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-5 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_YELLOW>;
+			label = "led03_yel";
+			gpios = <&gpioled 5 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-6 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			label = "led04_grn";
+			gpios = <&gpioled 6 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-7 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_YELLOW>;
+			label = "led04_yel";
+			gpios = <&gpioled 7 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-8 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			label = "led05_grn";
+			gpios = <&gpioled 8 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-9 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_YELLOW>;
+			label = "led05_yel";
+			gpios = <&gpioled 9 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-10 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			label = "led06_grn";
+			gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-11 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_RED>;
+			label = "led06_red";
+			gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-12 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			label = "led07_grn";
+			gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-13 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_RED>;
+			label = "led07_red";
+			gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-14 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			label = "led08_grn";
+			gpios = <&gpioled 10 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-15 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_YELLOW>;
+			label = "led08_yel";
+			gpios = <&gpioled 11 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-16 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			label = "led09_grn";
+			gpios = <&gpioled 12 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-17 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_YELLOW>;
+			label = "led09_yel";
+			gpios = <&gpioled 13 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-18 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			label = "led10_grn";
+			gpios = <&gpioled 14 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-19 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_YELLOW>;
+			label = "led10_yel";
+			gpios = <&gpioled 15 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+	};
+
+	pcie0_refclk: pcie0-refclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+};
+
+&A53_0 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_1 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_2 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_3 {
+	cpu-supply = <&buck2>;
+};
+
+&ddrc {
+	operating-points-v2 = <&ddrc_opp_table>;
+
+	ddrc_opp_table: opp-table {
+		compatible = "operating-points-v2";
+
+		opp-25M {
+			opp-hz = /bits/ 64 <25000000>;
+		};
+
+		opp-100M {
+			opp-hz = /bits/ 64 <100000000>;
+		};
+
+		opp-750M {
+			opp-hz = /bits/ 64 <750000000>;
+		};
+	};
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy0>;
+	local-mac-address = [00 00 00 00 00 00];
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+		};
+	};
+};
+
+&gpio1 {
+	gpio-line-names = "", "", "", "", "", "", "", "",
+		"", "", "", "", "rs232_en#", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&gpio5 {
+	gpio-line-names = "", "", "", "", "", "", "", "",
+		"", "", "", "", "pci_wdis#", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	gsc: gsc@20 {
+		compatible = "gw,gsc";
+		reg = <0x20>;
+		pinctrl-0 = <&pinctrl_gsc>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <26 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+
+		adc {
+			compatible = "gw,gsc-adc";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			channel@6 {
+				gw,mode = <0>;
+				reg = <0x06>;
+				label = "temp";
+			};
+
+			channel@82 {
+				gw,mode = <2>;
+				reg = <0x82>;
+				label = "vin";
+				gw,voltage-divider-ohms = <22100 1000>;
+				gw,voltage-offset-microvolt = <700000>;
+			};
+
+			channel@84 {
+				gw,mode = <2>;
+				reg = <0x84>;
+				label = "vdd_5p0";
+				gw,voltage-divider-ohms = <10000 10000>;
+			};
+
+			channel@86 {
+				gw,mode = <2>;
+				reg = <0x86>;
+				label = "vdd_3p3";
+				gw,voltage-divider-ohms = <10000 10000>;
+			};
+
+			channel@88 {
+				gw,mode = <2>;
+				reg = <0x88>;
+				label = "vdd_0p9";
+			};
+
+			channel@8c {
+				gw,mode = <2>;
+				reg = <0x8c>;
+				label = "vdd_soc";
+			};
+
+			channel@8e {
+				gw,mode = <2>;
+				reg = <0x8e>;
+				label = "vdd_arm";
+			};
+
+			channel@90 {
+				gw,mode = <2>;
+				reg = <0x90>;
+				label = "vdd_1p8";
+			};
+
+			channel@92 {
+				gw,mode = <2>;
+				reg = <0x92>;
+				label = "vdd_dram";
+			};
+
+			channel@a2 {
+				gw,mode = <2>;
+				reg = <0xa2>;
+				label = "vdd_gsc";
+				gw,voltage-divider-ohms = <10000 10000>;
+			};
+		};
+	};
+
+	gpio: gpio@23 {
+		compatible = "nxp,pca9555";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gsc>;
+		interrupts = <4>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c02";
+		reg = <0x51>;
+		pagesize = <16>;
+	};
+
+	eeprom@52 {
+		compatible = "atmel,24c02";
+		reg = <0x52>;
+		pagesize = <16>;
+	};
+
+	eeprom@53 {
+		compatible = "atmel,24c02";
+		reg = <0x53>;
+		pagesize = <16>;
+	};
+
+	rtc@68 {
+		compatible = "dallas,ds1672";
+		reg = <0x68>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	pmic@4b {
+		compatible = "rohm,bd71847";
+		reg = <0x4b>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+		rohm,reset-snvs-powered;
+		#clock-cells = <0>;
+		clocks = <&osc_32k 0>;
+		clock-output-names = "clk-32k-out";
+
+		regulators {
+			/* vdd_soc: 0.805-0.900V (typ=0.8V) */
+			BUCK1 {
+				regulator-name = "buck1";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <1250>;
+			};
+
+			/* vdd_arm: 0.805-1.0V (typ=0.9V) */
+			buck2: BUCK2 {
+				regulator-name = "buck2";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <1250>;
+				rohm,dvs-run-voltage = <1000000>;
+				rohm,dvs-idle-voltage = <900000>;
+			};
+
+			/* vdd_0p9: 0.805-1.0V (typ=0.9V) */
+			BUCK3 {
+				regulator-name = "buck3";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* vdd_3p3 */
+			BUCK4 {
+				regulator-name = "buck4";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* vdd_1p8 */
+			BUCK5 {
+				regulator-name = "buck5";
+				regulator-min-microvolt = <1605000>;
+				regulator-max-microvolt = <1995000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* vdd_dram */
+			BUCK6 {
+				regulator-name = "buck6";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* nvcc_snvs_1p8 */
+			LDO1 {
+				regulator-name = "ldo1";
+				regulator-min-microvolt = <1600000>;
+				regulator-max-microvolt = <1900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* vdd_snvs_0p8 */
+			LDO2 {
+				regulator-name = "ldo2";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* vdda_1p8 */
+			LDO3 {
+				regulator-name = "ldo3";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			LDO4 {
+				regulator-name = "ldo4";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			LDO6 {
+				regulator-name = "ldo6";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c3 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	accelerometer@19 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_accel>;
+		compatible = "st,lis2de12";
+		reg = <0x19>;
+		st,drdy-int-pin = <1>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "INT1";
+	};
+};
+
+&i2c4 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	status = "okay";
+
+	gpioled: gpio@27 {
+		compatible = "nxp,pca9555";
+		reg = <0x27>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+};
+
+&pcie_phy {
+	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
+	fsl,clkreq-unsupported;
+	clocks = <&pcie0_refclk>;
+	clock-names = "ref";
+	status = "okay";
+};
+
+&pcie0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie0>;
+	reset-gpio = <&gpio5 11 GPIO_ACTIVE_LOW>;
+	clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&clk IMX8MM_CLK_PCIE1_AUX>,
+		 <&pcie0_refclk>;
+	clock-names = "pcie", "pcie_aux", "pcie_bus";
+	assigned-clocks = <&clk IMX8MM_CLK_PCIE1_AUX>,
+			  <&clk IMX8MM_CLK_PCIE1_CTRL>;
+	assigned-clock-rates = <10000000>, <250000000>;
+	assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_50M>,
+				 <&clk IMX8MM_SYS_PLL2_250M>;
+	status = "okay";
+};
+
+&pgc_mipi {
+	status = "disabled";
+};
+
+/* off-board RS232 */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+/* console */
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+/* off-board RS232 */
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&usbotg1 {
+	dr_mode = "host";
+	disable-over-current;
+	status = "okay";
+};
+
+/* microSD */
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+};
+
+/* eMMC */
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO12_GPIO1_IO12	0x40000041 /* RS232# */
+			MX8MM_IOMUXC_ECSPI2_MISO_GPIO5_IO12	0x40000041 /* PCI_WDIS# */
+		>;
+	};
+
+	pinctrl_accel: accelgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO15_GPIO1_IO15	0x159
+		>;
+	};
+
+	pinctrl_fec1: fec1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_ENET_MDC_ENET1_MDC			0x3
+			MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO		0x3
+			MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3		0x1f
+			MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2		0x1f
+			MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1		0x1f
+			MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0		0x1f
+			MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3		0x91
+			MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2		0x91
+			MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1		0x91
+			MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0		0x91
+			MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC		0x1f
+			MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC		0x91
+			MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x91
+			MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x1f
+			MX8MM_IOMUXC_SAI2_TXFS_GPIO4_IO24		0x19 /* IRQ# */
+			MX8MM_IOMUXC_SAI2_TXC_GPIO4_IO25		0x19 /* RST# */
+		>;
+	};
+
+	pinctrl_gpio_leds: gpioledsgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO08_GPIO1_IO8	0x40000019
+			MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9	0x40000019
+			MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10	0x40000019
+			MX8MM_IOMUXC_GPIO1_IO11_GPIO1_IO11	0x40000019
+		>;
+	};
+
+	pinctrl_gsc: gscgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI2_TXD0_GPIO4_IO26	0x159
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL		0x400001c3
+			MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL		0x400001c3
+			MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL		0x400001c3
+			MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL		0x400001c3
+			MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_pcie0: pciegrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_ECSPI2_MOSI_GPIO5_IO11	0x41
+		>;
+	};
+
+	pinctrl_pmic: pmicgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_DATA02_GPIO3_IO8	0x41
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART1_RXD_UART1_DCE_RX	0x140
+			MX8MM_IOMUXC_UART1_TXD_UART1_DCE_TX	0x140
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX	0x140
+			MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX	0x140
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART3_RXD_UART3_DCE_RX	0x140
+			MX8MM_IOMUXC_UART3_TXD_UART3_DCE_TX	0x140
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x190
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d0
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d0
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d0
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d0
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d0
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x194
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d4
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d4
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d4
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d4
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d4
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x196
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d6
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d6
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d6
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d6
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d6
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2-gpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12	0x1c4
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT  0x1d0
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK	0x190
+			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD	0x1d0
+			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0	0x1d0
+			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1	0x1d0
+			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2	0x1d0
+			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3	0x1d0
+			MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4	0x1d0
+			MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5	0x1d0
+			MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6	0x1d0
+			MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7	0x1d0
+			MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE	0x190
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK	0x194
+			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD	0x1d4
+			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0	0x1d4
+			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1	0x1d4
+			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2	0x1d4
+			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3	0x1d4
+			MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4	0x1d4
+			MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5	0x1d4
+			MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6	0x1d4
+			MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7	0x1d4
+			MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE	0x194
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK	0x196
+			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD	0x1d6
+			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0	0x1d6
+			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1	0x1d6
+			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2	0x1d6
+			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3	0x1d6
+			MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4	0x1d6
+			MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5	0x1d6
+			MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6	0x1d6
+			MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7	0x1d6
+			MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE	0x196
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B	0xc6
+		>;
+	};
+};

arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi

@@ -53,6 +53,21 @@ key-wakeup {
 		};
 	};
 
+	hdmi_connector: hdmi-connector {
+		compatible = "hdmi-connector";
+		ddc-i2c-bus = <&i2c2>;
+		label = "hdmi";
+		type = "a";
+		status = "disabled";
+	};
+
+	panel_lvds: panel-lvds {
+		compatible = "panel-lvds";
+		backlight = <&backlight>;
+		data-mapping = "vesa-24";
+		status = "disabled";
+	};
+
 	/* Carrier Board Supplies */
 	reg_1p8v: regulator-1p8v {
 		compatible = "regulator-fixed";
@@ -561,8 +576,8 @@ gpio_expander_21: gpio-expander@21 {
 		status = "disabled";
 	};
 
-	lvds_ti_sn65dsi83: bridge@2c {
-		compatible = "ti,sn65dsi83";
+	lvds_ti_sn65dsi84: bridge@2c {
+		compatible = "ti,sn65dsi84";
 		/* Verdin GPIO_9_DSI (SN65DSI84 IRQ, SODIMM 17, unused) */
 		/* Verdin GPIO_10_DSI (SODIMM 21) */
 		enable-gpios = <&gpio3 3 GPIO_ACTIVE_HIGH>;

arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts

@@ -213,7 +213,6 @@ can@0 {
 		compatible = "microchip,mcp2515";
 		reg = <0>;
 		clocks = <&can20m>;
-		oscillator-frequency = <20000000>;
 		interrupt-parent = <&gpio2>;
 		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
 		spi-max-frequency = <10000000>;

arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk2.dts

 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Copyright (C) 2022 Marek Vasut <marex@denx.de>
+ *
+ * DHCOM iMX8MP variant:
+ * DHCM-iMX8ML8-C160-R409-F1638-SPI16-GE-CAN2-SD-RTC-WBTA-ADC-T-RGB-CSI2-HS-I-01D2
+ * DHCOM PCB number: 660-100 or newer
+ * PDK2 PCB number: 516-400 or newer
  */
 
 /dts-v1/;
 
 #include <dt-bindings/leds/common.h>
-#include <dt-bindings/net/qca-ar803x.h>
 #include <dt-bindings/phy/phy-imx8-pcie.h>
 #include "imx8mp-dhcom-som.dtsi"
 
 / {
 	model = "DH electronics i.MX8M Plus DHCOM Premium Developer Kit (2)";
-	compatible = "dh,imx8mp-dhcom-pdk2", "fsl,imx8mp";
+	compatible = "dh,imx8mp-dhcom-pdk2", "dh,imx8mp-dhcom-som",
+		     "fsl,imx8mp";
 
 	chosen {
 		stdout-path = &uart1;

arch/arm64/boot/dts/freescale/imx8mp-evk.dts

@@ -5,6 +5,7 @@
 
 /dts-v1/;
 
+#include <dt-bindings/phy/phy-imx8-pcie.h>
 #include "imx8mp.dtsi"
 
 / {
@@ -33,6 +34,12 @@ memory@40000000 {
 		      <0x1 0x00000000 0 0xc0000000>;
 	};
 
+	pcie0_refclk: pcie0-refclk {
+		compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <100000000>;
+	};
+
 	reg_can1_stby: regulator-can1-stby {
 		compatible = "regulator-fixed";
 		regulator-name = "can1-stby";
@@ -55,6 +62,17 @@ reg_can2_stby: regulator-can2-stby {
 		enable-active-high;
 	};
 
+	reg_pcie0: regulator-pcie {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pcie0_reg>;
+		regulator-name = "MPCIE_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 6 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
 	reg_usdhc2_vmmc: regulator-usdhc2 {
 		compatible = "regulator-fixed";
 		pinctrl-names = "default";
@@ -350,6 +368,28 @@ &i2c5 {
 	 */
 };
 
+&pcie_phy {
+	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
+	clocks = <&pcie0_refclk>;
+	clock-names = "ref";
+	status = "okay";
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie0>;
+	reset-gpio = <&gpio2 7 GPIO_ACTIVE_LOW>;
+	clocks = <&clk IMX8MP_CLK_HSIO_ROOT>,
+		 <&clk IMX8MP_CLK_PCIE_ROOT>,
+		 <&clk IMX8MP_CLK_HSIO_AXI>;
+	clock-names = "pcie", "pcie_aux", "pcie_bus";
+	assigned-clocks = <&clk IMX8MP_CLK_PCIE_AUX>;
+	assigned-clock-rates = <10000000>;
+	assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_50M>;
+	vpcie-supply = <&reg_pcie0>;
+	status = "okay";
+};
+
 &snvs_pwrkey {
 	status = "okay";
 };
@@ -502,6 +542,19 @@ MX8MP_IOMUXC_SPDIF_TX__I2C5_SCL         0x400001c2
 		>;
 	};
 
+	pinctrl_pcie0: pcie0grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C4_SCL__PCIE_CLKREQ_B	0x61 /* open drain, pull up */
+			MX8MP_IOMUXC_SD1_DATA5__GPIO2_IO07	0x41
+		>;
+	};
+
+	pinctrl_pcie0_reg: pcie0reggrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD1_DATA4__GPIO2_IO06	0x41
+		>;
+	};
+
 	pinctrl_pmic: pmicgrp {
 		fsl,pins = <
 			MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03	0x000001c0

arch/arm64/boot/dts/freescale/imx8mp-icore-mx8mp-edimm2.2.dts

@@ -2,7 +2,7 @@
 /*
  * Copyright (c) 2018 NXP
  * Copyright (c) 2019 Engicam srl
- * Copyright (c) 2020 Amarula Solutons(India)
+ * Copyright (c) 2020 Amarula Solutions(India)
  */
 
 /dts-v1/;

arch/arm64/boot/dts/freescale/imx8mp-icore-mx8mp.dtsi

@@ -2,7 +2,7 @@
 /*
  * Copyright (c) 2018 NXP
  * Copyright (c) 2019 Engicam srl
- * Copyright (c) 2020 Amarula Solutons(India)
+ * Copyright (c) 2020 Amarula Solutions(India)
  */
 
 / {

arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-14N0600E.dtsi

+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2022 Avnet Embedded GmbH
+ */
+/dts-v1/;
+
+#include "imx8mp-msc-sm2s.dtsi"
+
+/ {
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x0 0x40000000 0 0x80000000>; /* bank0, 2GiB */
+	};
+};
+
+&cpu_alert0 {
+	temperature = <95000>;
+};
+
+&cpu_crit0 {
+	temperature = <105000>;
+};
+
+&soc_alert0 {
+	temperature = <95000>;
+};
+
+&soc_crit0 {
+	temperature = <105000>;
+};
+
+&tca6424 {
+	gbe0-int-hog {
+		gpio-hog;
+		input;
+		gpios = <3 GPIO_ACTIVE_LOW>;
+	};
+
+	gbe1-int-hog {
+		gpio-hog;
+		input;
+		gpios = <4 GPIO_ACTIVE_LOW>;
+	};
+
+	cam2-rst-hog {
+		gpio-hog;
+		output-high;
+		gpios = <9 GPIO_ACTIVE_LOW>;
+	};
+
+	cam2-pwr-hog {
+		gpio-hog;
+		output-high;
+		gpios = <10 GPIO_ACTIVE_LOW>;
+	};
+
+	tpm-int-hog {
+		gpio-hog;
+		input;
+		gpios = <13 GPIO_ACTIVE_LOW>;
+	};
+
+	wifi-int-hog {
+		gpio-hog;
+		input;
+		gpios = <14 GPIO_ACTIVE_LOW>;
+	};
+};

arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-ep1.dts

+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2022 Avnet Embedded GmbH
+ */
+
+/dts-v1/;
+
+#include "imx8mp-msc-sm2s-14N0600E.dtsi"
+#include <dt-bindings/clock/imx8mp-clock.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "MSC SM2-MB-EP1 Carrier Board with SM2S-IMX8PLUS-QC6-14N0600E SoM";
+	compatible = "avnet,sm2s-imx8mp-14N0600E-ep1",
+		     "avnet,sm2s-imx8mp-14N0600E", "avnet,sm2s-imx8mp",
+		     "fsl,imx8mp";
+};
+
+&flexcan1 {
+	status = "okay";
+};
+
+&flexcan2 {
+	status = "okay";
+};
+
+&usdhc2 {
+	no-1-8-v;
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_smarc_gpio>;
+
+	pinctrl_smarc_gpio: smarcgpiosgrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_GPIO1_IO11__GPIO1_IO11	0x19>, /* GPIO0 */
+			<MX8MP_IOMUXC_SAI1_RXC__GPIO4_IO01	0x19>, /* GPIO1 */
+			<MX8MP_IOMUXC_SAI1_RXD0__GPIO4_IO02	0x19>, /* GPIO2 */
+			<MX8MP_IOMUXC_SAI1_RXD1__GPIO4_IO03	0x19>, /* GPIO3 */
+			<MX8MP_IOMUXC_SAI3_RXC__GPIO4_IO29	0x19>, /* GPIO4 */
+			<MX8MP_IOMUXC_SAI3_MCLK__GPIO5_IO02	0x19>, /* GPIO5 */
+			<MX8MP_IOMUXC_SAI1_TXD6__GPIO4_IO18	0x19>, /* GPIO6 */
+			<MX8MP_IOMUXC_GPIO1_IO10__GPIO1_IO10	0x19>, /* GPIO7 */
+			<MX8MP_IOMUXC_SAI1_MCLK__GPIO4_IO20	0x19>, /* GPIO8 */
+			<MX8MP_IOMUXC_SAI2_RXFS__GPIO4_IO21	0x19>, /* GPIO9 */
+			<MX8MP_IOMUXC_SAI2_RXC__GPIO4_IO22	0x19>, /* GPIO10 */
+			<MX8MP_IOMUXC_SAI3_RXFS__GPIO4_IO28	0x19>, /* GPIO11 */
+			<MX8MP_IOMUXC_SAI1_TXD7__GPIO4_IO19	0x19>, /* GPIO12 */
+			<MX8MP_IOMUXC_SAI1_RXFS__GPIO4_IO00	0x19>; /* GPIO13 */
+	};
+};

arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s.dtsi

+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2022 Avnet Embedded GmbH
+ */
+
+/dts-v1/;
+
+#include "imx8mp.dtsi"
+#include <dt-bindings/net/ti-dp83867.h>
+
+/ {
+	aliases {
+		rtc0 = &sys_rtc;
+		rtc1 = &snvs_rtc;
+	};
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	reg_usb0_host_vbus: regulator-usb0-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb0_host_vbus";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usb0_vbus>;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usb1_host_vbus: regulator-usb1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb1_host_vbus";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usb1_vbus>;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio1 14 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usdhc2_vmmc: regulator-usdhc2 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usdhc2_vmmc>;
+		regulator-name = "VSD_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		startup-delay-us = <100>;
+		off-on-delay-us = <12000>;
+	};
+
+	reg_flexcan1_xceiver: regulator-flexcan1 {
+		compatible = "regulator-fixed";
+		regulator-name = "flexcan1-xceiver";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_flexcan2_xceiver: regulator-flexcan2 {
+		compatible = "regulator-fixed";
+		regulator-name = "flexcan2-xceiver";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	lcd0_backlight: backlight-0 {
+		compatible = "pwm-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_lcd0_backlight>;
+		pwms = <&pwm1 0 100000 0>;
+		brightness-levels = <0 255>;
+		num-interpolated-steps = <255>;
+		default-brightness-level = <255>;
+		enable-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+		status = "disabled";
+	};
+
+	lcd1_backlight: backlight-1 {
+		compatible = "pwm-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_lcd1_backlight>;
+		pwms = <&pwm2 0 100000 0>;
+		brightness-levels = <0 255>;
+		num-interpolated-steps = <255>;
+		default-brightness-level = <255>;
+		enable-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+		status = "disabled";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_leds>;
+		status = "okay";
+
+		led-sw {
+			label = "sw-led";
+			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	extcon_usb0: extcon-usb0 {
+		compatible = "linux,extcon-usb-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usb0_extcon>;
+		id-gpio = <&gpio1 3 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&A53_0 {
+	cpu-supply = <&vcc_arm>;
+};
+
+&A53_1 {
+	cpu-supply = <&vcc_arm>;
+};
+
+&A53_2 {
+	cpu-supply = <&vcc_arm>;
+};
+
+&A53_3 {
+	cpu-supply = <&vcc_arm>;
+};
+
+&ecspi1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	cs-gpios = <0>, <&gpio2 8 GPIO_ACTIVE_LOW>;
+};
+
+&ecspi2 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	cs-gpios = <0>, <&gpio2 9 GPIO_ACTIVE_LOW>;
+};
+
+&eqos {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_eqos>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy0>;
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@1 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <1>;
+			eee-broken-1000t;
+			reset-gpios = <&tca6424 16 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <1000>;
+			reset-deassert-us = <1000>;
+			ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+			ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+			ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+			ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+		};
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy1>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy1: ethernet-phy@1 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <1>;
+			eee-broken-1000t;
+			reset-gpios = <&tca6424 17 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <1000>;
+			reset-deassert-us = <1000>;
+			ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+			ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+			ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+			ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+		};
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	clock-frequency = <400000>;
+	status = "okay";
+
+	id_eeprom: eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+		pagesize = <32>;
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	clock-frequency = <400000>;
+	status = "disabled";
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	clock-frequency = <400000>;
+	status = "disabled";
+};
+
+&i2c4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	clock-frequency = <400000>;
+	status = "disabled";
+};
+
+&i2c5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c5>;
+	clock-frequency = <400000>;
+	status = "disabled";
+};
+
+&i2c6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c6>;
+	clock-frequency = <400000>;
+	status = "okay";
+
+	tca6424: gpio@22 {
+		compatible = "ti,tca6424";
+		reg = <0x22>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_tca6424>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "BOOT_SEL0#", "BOOT_SEL1#", "BOOT_SEL2#",
+			"gbe0_int", "gbe1_int", "pmic_int", "rtc_int", "lvds_int",
+			"PCIE_WAKE#", "cam2_rst", "cam2_pwr", "SLEEP#",
+			"wifi_pd", "tpm_int", "wifi_int", "PCIE_A_RST#",
+			"gbe0_rst", "gbe1_rst", "LID#", "BATLOW#", "CHARGING#",
+			"CHARGER_PRSNT#";
+		interrupt-parent = <&gpio1>;
+		interrupts = <9 IRQ_TYPE_EDGE_RISING>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	dsi_lvds_bridge: bridge@2d {
+		compatible = "ti,sn65dsi83";
+		reg = <0x2d>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_lvds_bridge>;
+		enable-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+		status = "disabled";
+	};
+
+	pmic: pmic@30 {
+		compatible = "ricoh,rn5t567";
+		reg = <0x30>;
+		interrupt-parent = <&tca6424>;
+		interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
+
+		regulators {
+			DCDC1 {
+				regulator-name = "VCC_SOC";
+				regulator-always-on;
+				regulator-min-microvolt = <950000>;
+				regulator-max-microvolt = <950000>;
+			};
+
+			DCDC2 {
+				regulator-name = "VCC_DRAM";
+				regulator-always-on;
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+			};
+
+			vcc_arm: DCDC3 {
+				regulator-name = "VCC_ARM";
+				regulator-always-on;
+				regulator-min-microvolt = <950000>;
+				regulator-max-microvolt = <950000>;
+			};
+
+			DCDC4 {
+				regulator-name = "VCC_1V8";
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			LDO1 {
+				regulator-name = "VCC_LDO1_2V5";
+				regulator-always-on;
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <2500000>;
+			};
+
+			LDO2 {
+				regulator-name = "VCC_LDO2_1V8";
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			LDO3 {
+				regulator-name = "VCC_ETH_2V5";
+				regulator-always-on;
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <2500000>;
+			};
+
+			LDO4 {
+				regulator-name = "VCC_DDR4_2V5";
+				regulator-always-on;
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <2500000>;
+			};
+
+			LDO5 {
+				regulator-name = "VCC_LDO5_1V8";
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			LDORTC1 {
+				regulator-name = "VCC_SNVS_1V8";
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			LDORTC2 {
+				regulator-name = "VCC_SNVS_3V3";
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+		};
+	};
+
+	sys_rtc: rtc@32 {
+		compatible = "ricoh,r2221tl";
+		reg = <0x32>;
+		interrupt-parent = <&tca6424>;
+		interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
+	};
+
+	tmp_sensor: temperature-sensor@71 {
+		compatible = "ti,tmp103";
+		reg = <0x71>;
+	};
+};
+
+&flexcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	xceiver-supply = <&reg_flexcan1_xceiver>;
+	status = "disabled";
+};
+
+&flexcan2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	xceiver-supply = <&reg_flexcan2_xceiver>;
+	status = "disabled";
+};
+
+&flexspi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexspi0>;
+	status = "okay";
+
+	qspi_flash: flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <80000000>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+	};
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "disabled";
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>;
+	status = "disabled";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+	status = "disabled";
+};
+
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
+	status = "disabled";
+};
+
+&snvs_pwrkey {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "disabled";
+};
+
+&usb3_phy0 {
+	vbus-supply = <&reg_usb0_host_vbus>;
+	status = "okay";
+};
+
+&usb3_phy1 {
+	vbus-supply = <&reg_usb1_host_vbus>;
+	status = "okay";
+};
+
+&usb3_0 {
+	status = "okay";
+};
+
+&usb3_1 {
+	status = "okay";
+};
+
+&usb_dwc3_0 {
+	dr_mode = "otg";
+	hnp-disable;
+	srp-disable;
+	adp-disable;
+	extcon = <&extcon_usb0>;
+	status = "okay";
+};
+
+&usb_dwc3_1 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usdhc2 {
+	assigned-clocks = <&clk IMX8MP_CLK_USDHC2>;
+	assigned-clock-rates = <400000000>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>;
+	bus-width = <4>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	status = "okay";
+};
+
+&usdhc3 {
+	assigned-clocks = <&clk IMX8MP_CLK_USDHC3>;
+	assigned-clock-rates = <400000000>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins =
+			<MX8MP_IOMUXC_ECSPI1_MISO__ECSPI1_MISO		0x82>,
+			<MX8MP_IOMUXC_ECSPI1_MOSI__ECSPI1_MOSI		0x82>,
+			<MX8MP_IOMUXC_ECSPI1_SCLK__ECSPI1_SCLK		0x82>,
+			<MX8MP_IOMUXC_ECSPI1_SS0__ECSPI1_SS0		0x40000>,
+			<MX8MP_IOMUXC_SD1_DATA6__GPIO2_IO08		0x40000>;
+	};
+
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins =
+			<MX8MP_IOMUXC_ECSPI2_MISO__ECSPI2_MISO		0x82>,
+			<MX8MP_IOMUXC_ECSPI2_MOSI__ECSPI2_MOSI		0x82>,
+			<MX8MP_IOMUXC_ECSPI2_SCLK__ECSPI2_SCLK		0x82>,
+			<MX8MP_IOMUXC_ECSPI2_SS0__ECSPI2_SS0		0x40000>,
+			<MX8MP_IOMUXC_SD1_DATA7__GPIO2_IO09		0x40000>;
+	};
+
+	pinctrl_eqos: eqosgrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC		0x3>,
+			<MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO		0x3>,
+			<MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0	0x91>,
+			<MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1	0x91>,
+			<MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2	0x91>,
+			<MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3	0x91>,
+			<MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK	0x91>,
+			<MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL	0x91>,
+			<MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0	0x1f>,
+			<MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1	0x1f>,
+			<MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2	0x1f>,
+			<MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3	0x1f>,
+			<MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL	0x1f>,
+			<MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK	0x1f>;
+	};
+
+	pinctrl_fec: fecgrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_SAI1_RXD2__ENET1_MDC		0x3>,
+			<MX8MP_IOMUXC_SAI1_RXD3__ENET1_MDIO		0x3>,
+			<MX8MP_IOMUXC_SAI1_RXD4__ENET1_RGMII_RD0	0x91>,
+			<MX8MP_IOMUXC_SAI1_RXD5__ENET1_RGMII_RD1	0x91>,
+			<MX8MP_IOMUXC_SAI1_RXD6__ENET1_RGMII_RD2	0x91>,
+			<MX8MP_IOMUXC_SAI1_RXD7__ENET1_RGMII_RD3	0x91>,
+			<MX8MP_IOMUXC_SAI1_TXC__ENET1_RGMII_RXC		0x91>,
+			<MX8MP_IOMUXC_SAI1_TXFS__ENET1_RGMII_RX_CTL	0x91>,
+			<MX8MP_IOMUXC_SAI1_TXD0__ENET1_RGMII_TD0	0x1f>,
+			<MX8MP_IOMUXC_SAI1_TXD1__ENET1_RGMII_TD1	0x1f>,
+			<MX8MP_IOMUXC_SAI1_TXD2__ENET1_RGMII_TD2	0x1f>,
+			<MX8MP_IOMUXC_SAI1_TXD3__ENET1_RGMII_TD3	0x1f>,
+			<MX8MP_IOMUXC_SAI1_TXD4__ENET1_RGMII_TX_CTL	0x1f>,
+			<MX8MP_IOMUXC_SAI1_TXD5__ENET1_RGMII_TXC	0x1f>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins =
+			<MX8MP_IOMUXC_SAI5_RXD1__CAN1_TX		0x154>,
+			<MX8MP_IOMUXC_SAI5_RXD2__CAN1_RX		0x154>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins =
+			<MX8MP_IOMUXC_SAI5_MCLK__CAN2_RX		0x154>,
+			<MX8MP_IOMUXC_SAI5_RXD3__CAN2_TX		0x154>;
+	};
+
+	pinctrl_flexspi0: flexspi0grp {
+		fsl,pins =
+			<MX8MP_IOMUXC_NAND_ALE__FLEXSPI_A_SCLK		0x1c2>,
+			<MX8MP_IOMUXC_NAND_CE0_B__FLEXSPI_A_SS0_B	0x82>,
+			<MX8MP_IOMUXC_NAND_DATA00__FLEXSPI_A_DATA00	0x82>,
+			<MX8MP_IOMUXC_NAND_DATA01__FLEXSPI_A_DATA01	0x82>,
+			<MX8MP_IOMUXC_NAND_DATA02__FLEXSPI_A_DATA02	0x82>,
+			<MX8MP_IOMUXC_NAND_DATA03__FLEXSPI_A_DATA03	0x82>,
+			<MX8MP_IOMUXC_NAND_DQS__GPIO3_IO14		0x19>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins =
+			<MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL		0x400001c3>,
+			<MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA		0x400001c3>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins =
+			<MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL		0x400001c3>,
+			<MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA		0x400001c3>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins =
+			<MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL		0x400001c3>,
+			<MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA		0x400001c3>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins =
+			<MX8MP_IOMUXC_I2C4_SCL__I2C4_SCL		0x400001c3>,
+			<MX8MP_IOMUXC_I2C4_SDA__I2C4_SDA		0x400001c3>;
+	};
+
+	pinctrl_i2c5: i2c5grp {
+		fsl,pins =
+			<MX8MP_IOMUXC_SPDIF_TX__I2C5_SCL		0x400001c3>,
+			<MX8MP_IOMUXC_SPDIF_RX__I2C5_SDA		0x400001c3>;
+	};
+
+	pinctrl_i2c6: i2c6grp {
+		fsl,pins =
+			<MX8MP_IOMUXC_SAI5_RXFS__I2C6_SCL		0x400001c3>,
+			<MX8MP_IOMUXC_SAI5_RXC__I2C6_SDA		0x400001c3>;
+	};
+
+	pinctrl_lcd0_backlight: lcd0-backlightgrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_GPIO1_IO05__GPIO1_IO05		0x41>;
+	};
+
+	pinctrl_lcd1_backlight: lcd1-backlightgrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_GPIO1_IO06__GPIO1_IO06		0x41>;
+	};
+
+	pinctrl_leds: ledsgrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_GPIO1_IO08__GPIO1_IO08		0x19>;
+	};
+
+	pinctrl_lvds_bridge: lvds-bridgegrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_GPIO1_IO07__GPIO1_IO07		0x41>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins =
+			<MX8MP_IOMUXC_SPDIF_EXT_CLK__PWM1_OUT		0x116>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins =
+			<MX8MP_IOMUXC_SAI5_RXD0__PWM2_OUT		0x116>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins =
+			<MX8MP_IOMUXC_GPIO1_IO10__PWM3_OUT		0x116>;
+	};
+
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins =
+			<MX8MP_IOMUXC_SAI3_MCLK__PWM4_OUT		0x116>;
+	};
+
+	pinctrl_tca6424: tca6424grp {
+		fsl,pins =
+			<MX8MP_IOMUXC_GPIO1_IO09__GPIO1_IO09		0x41>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins =
+			<MX8MP_IOMUXC_UART1_RXD__UART1_DCE_RX		0x49>,
+			<MX8MP_IOMUXC_UART1_TXD__UART1_DCE_TX		0x49>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins =
+			<MX8MP_IOMUXC_SD1_DATA4__GPIO2_IO06		0x1c4>,
+			<MX8MP_IOMUXC_SD1_DATA5__GPIO2_IO07		0x1c4>,
+			<MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX		0x49>,
+			<MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX		0x49>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins =
+			<MX8MP_IOMUXC_SD1_RESET_B__GPIO2_IO10		0x1c4>,
+			<MX8MP_IOMUXC_SD1_STROBE__GPIO2_IO11		0x1c4>,
+			<MX8MP_IOMUXC_UART3_RXD__UART3_DCE_RX		0x49>,
+			<MX8MP_IOMUXC_UART3_TXD__UART3_DCE_TX		0x49>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins =
+			<MX8MP_IOMUXC_UART4_RXD__UART4_DCE_RX		0x49>,
+			<MX8MP_IOMUXC_UART4_TXD__UART4_DCE_TX		0x49>;
+	};
+
+	pinctrl_usb0_extcon: usb0-extcongrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03		0x19>;
+	};
+
+	pinctrl_usb0_vbus: usb0-vbusgrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_GPIO1_IO12__GPIO1_IO12		0x19>;
+	};
+
+	pinctrl_usb1_vbus: usb1-vbusgrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_GPIO1_IO14__GPIO1_IO14		0x19>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2-gpiogrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12		0x1c4>,
+			<MX8MP_IOMUXC_SD2_WP__GPIO2_IO20		0x1c4>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins =
+			<MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK		0x190>,
+			<MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD		0x1d0>,
+			<MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0		0x1d0>,
+			<MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1		0x1d0>,
+			<MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2		0x1d0>,
+			<MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3		0x1d0>,
+			<MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT	0xc1>;
+	};
+
+	pinctrl_usdhc2_vmmc: usdhc2-vmmcgrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19		0x41>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK		0x194>,
+			<MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD		0x1d4>,
+			<MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0		0x1d4>,
+			<MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1		0x1d4>,
+			<MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2		0x1d4>,
+			<MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3		0x1d4>,
+			<MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT	0xc1>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK		0x196>,
+			<MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD		0x1d6>,
+			<MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0		0x1d6>,
+			<MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1		0x1d6>,
+			<MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2		0x1d6>,
+			<MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3		0x1d6>,
+			<MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT	0xc1>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins =
+			<MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK		0x190>,
+			<MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD		0x1d0>,
+			<MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0		0x1d0>,
+			<MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1		0x1d0>,
+			<MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2		0x1d0>,
+			<MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3		0x1d0>,
+			<MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4		0x1d0>,
+			<MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5		0x1d0>,
+			<MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6		0x1d0>,
+			<MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7		0x1d0>,
+			<MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE		0x190>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK		0x194>,
+			<MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD		0x1d4>,
+			<MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0		0x1d4>,
+			<MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1		0x1d4>,
+			<MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2		0x1d4>,
+			<MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3		0x1d4>,
+			<MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4		0x1d4>,
+			<MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5		0x1d4>,
+			<MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6		0x1d4>,
+			<MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7		0x1d4>,
+			<MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE		0x194>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK		0x196>,
+			<MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD		0x1d6>,
+			<MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0		0x1d6>,
+			<MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1		0x1d6>,
+			<MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2		0x1d6>,
+			<MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3		0x1d6>,
+			<MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4		0x1d6>,
+			<MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5		0x1d6>,
+			<MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6		0x1d6>,
+			<MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7		0x1d6>,
+			<MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE		0x196>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B		0xc6>;
+	};
+};

arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts

@@ -139,6 +139,13 @@ reg_vcc_3v3: regulator-3v3 {
 		regulator-max-microvolt = <3300000>;
 	};
 
+	reg_vcc_5v0: regulator-5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_5V0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
 	reserved-memory {
 		#address-cells = <2>;
 		#size-cells = <2>;
@@ -445,6 +452,38 @@ &uart4 {
 	status = "okay";
 };
 
+&usb3_0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb0>;
+	fsl,over-current-active-low;
+	status = "okay";
+};
+
+&usb3_phy0 {
+	vbus-supply = <&reg_vcc_5v0>;
+	status = "okay";
+};
+
+&usb_dwc3_0 {
+	/* dual role is implemented, but not a full featured OTG */
+	hnp-disable;
+	srp-disable;
+	adp-disable;
+	dr_mode = "otg";
+	usb-role-switch;
+	role-switch-default-mode = "peripheral";
+	status = "okay";
+
+	connector {
+		compatible = "gpio-usb-b-connector", "usb-b-connector";
+		type = "micro";
+		label = "X29";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbcon0>;
+		id-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+	};
+};
+
 &usdhc2 {
 	pinctrl-names = "default", "state_100mhz", "state_200mhz";
 	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
@@ -666,6 +705,15 @@ pinctrl_uart4: uart4grp {
 			   <MX8MP_IOMUXC_UART4_TXD__UART4_DCE_TX	0x140>;
 	};
 
+	pinctrl_usb0: usb0grp {
+		fsl,pins = <MX8MP_IOMUXC_GPIO1_IO13__USB1_OTG_OC	0x1c0>,
+			   <MX8MP_IOMUXC_GPIO1_IO12__USB1_OTG_PWR	0x1c0>;
+	};
+
+	pinctrl_usbcon0: usb0congrp {
+		fsl,pins = <MX8MP_IOMUXC_GPIO1_IO10__GPIO1_IO10		0x1c0>;
+	};
+
 	pinctrl_usdhc2: usdhc2grp {
 		fsl,pins = <MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK		0x192>,
 			   <MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD		0x1d2>,

arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts

@@ -8,6 +8,7 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/linux-event-codes.h>
 #include <dt-bindings/leds/common.h>
+#include <dt-bindings/phy/phy-imx8-pcie.h>
 
 #include "imx8mp.dtsi"
 
@@ -100,6 +101,12 @@ led-1 {
 		};
 	};
 
+	pcie0_refclk: pcie0-refclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+	};
+
 	pps {
 		compatible = "pps-gpio";
 		pinctrl-names = "default";
@@ -135,13 +142,29 @@ reg_wifi_en: regulator-wifi-en {
 		compatible = "regulator-fixed";
 		regulator-name = "wl";
 		gpio = <&gpio3 9 GPIO_ACTIVE_HIGH>;
-		startup-delay-us = <100>;
+		startup-delay-us = <70000>;
 		enable-active-high;
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
 	};
 };
 
+&A53_0 {
+	cpu-supply = <&reg_arm>;
+};
+
+&A53_1 {
+	cpu-supply = <&reg_arm>;
+};
+
+&A53_2 {
+	cpu-supply = <&reg_arm>;
+};
+
+&A53_3 {
+	cpu-supply = <&reg_arm>;
+};
+
 /* off-board header */
 &ecspi2 {
 	pinctrl-names = "default";
@@ -200,8 +223,8 @@ &gpio1 {
 &gpio2 {
 	gpio-line-names =
 		"", "", "", "", "", "", "", "",
-		"", "", "", "", "", "", "", "",
-		"pcie3_wdis#", "", "", "pcie1_wdis@", "pcie2_wdis#", "", "", "",
+		"", "", "", "", "", "", "pcie3_wdis#", "",
+		"", "", "pcie2_wdis#", "", "", "", "", "",
 		"", "", "", "", "", "", "", "";
 };
 
@@ -362,7 +385,7 @@ BUCK1 {
 				regulator-ramp-delay = <3125>;
 			};
 
-			BUCK2 {
+			reg_arm: BUCK2 {
 				regulator-name = "BUCK2";
 				regulator-min-microvolt = <720000>;
 				regulator-max-microvolt = <1025000>;
@@ -542,6 +565,28 @@ &i2c4 {
 	status = "okay";
 };
 
+&pcie_phy {
+	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
+	fsl,clkreq-unsupported;
+	clocks = <&pcie0_refclk>;
+	clock-names = "ref";
+	status = "okay";
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie0>;
+	reset-gpio = <&gpio2 17 GPIO_ACTIVE_LOW>;
+	clocks = <&clk IMX8MP_CLK_HSIO_ROOT>,
+		 <&clk IMX8MP_CLK_PCIE_ROOT>,
+		 <&clk IMX8MP_CLK_HSIO_AXI>;
+	clock-names = "pcie", "pcie_aux", "pcie_bus";
+	assigned-clocks = <&clk IMX8MP_CLK_PCIE_AUX>;
+	assigned-clock-rates = <10000000>;
+	assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_50M>;
+	status = "okay";
+};
+
 /* GPS / off-board header */
 &uart1 {
 	pinctrl-names = "default";
@@ -556,6 +601,21 @@ &uart2 {
 	status = "okay";
 };
 
+/* bluetooth HCI */
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>, <&pinctrl_uart3_gpio>;
+	cts-gpios = <&gpio3 21 GPIO_ACTIVE_LOW>;
+	rts-gpios = <&gpio3 22 GPIO_ACTIVE_LOW>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm4330-bt";
+		shutdown-gpios = <&gpio3 8 GPIO_ACTIVE_HIGH>;
+	};
+};
+
 &uart4 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart4>;
@@ -563,20 +623,35 @@ &uart4 {
 };
 
 /* USB1 - Type C front panel */
-&usb3_phy0 {
+&usb3_0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usb1>;
+	fsl,over-current-active-low;
 	status = "okay";
 };
 
-&usb3_0 {
-	fsl,over-current-active-low;
+&usb3_phy0 {
 	status = "okay";
 };
 
 &usb_dwc3_0 {
-	dr_mode = "host";
+	/* dual role is implemented but not a full featured OTG */
+	adp-disable;
+	hnp-disable;
+	srp-disable;
+	dr_mode = "otg";
+	usb-role-switch;
+	role-switch-default-mode = "peripheral";
 	status = "okay";
+
+	connector {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbcon1>;
+		compatible = "gpio-usb-b-connector", "usb-b-connector";
+		type = "micro";
+		label = "Type-C";
+		id-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+	};
 };
 
 /* USB2 - USB3.0 Hub */
@@ -596,6 +671,25 @@ &usb_dwc3_1 {
 	status = "okay";
 };
 
+/* SDIO WiFi */
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	bus-width = <4>;
+	non-removable;
+	vmmc-supply = <&reg_wifi_en>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	wifi@0 {
+		compatible = "cypress,cyw4373-fmac";
+		reg = <0>;
+	};
+};
+
 /* eMMC */
 &usdhc3 {
 	assigned-clocks = <&clk IMX8MP_CLK_USDHC3>;
@@ -625,7 +719,6 @@ pinctrl_hog: hoggrp {
 			MX8MP_IOMUXC_GPIO1_IO09__GPIO1_IO09	0x40000040 /* DIO0 */
 			MX8MP_IOMUXC_GPIO1_IO11__GPIO1_IO11	0x40000040 /* DIO1 */
 			MX8MP_IOMUXC_NAND_DQS__GPIO3_IO14	0x40000040 /* M2SKT_OFF# */
-			MX8MP_IOMUXC_SD2_DATA2__GPIO2_IO17	0x40000150 /* PCIE1_WDIS# */
 			MX8MP_IOMUXC_SD2_DATA3__GPIO2_IO18	0x40000150 /* PCIE2_WDIS# */
 			MX8MP_IOMUXC_SD2_CMD__GPIO2_IO14	0x40000150 /* PCIE3_WDIS# */
 			MX8MP_IOMUXC_NAND_DATA00__GPIO3_IO06	0x40000040 /* M2SKT_RST# */
@@ -738,6 +831,12 @@ MX8MP_IOMUXC_SD2_DATA1__GPIO2_IO16	0x10
 		>;
 	};
 
+	pinctrl_pcie0: pciegrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_DATA2__GPIO2_IO17	0x110
+		>;
+	};
+
 	pinctrl_pmic: pmicgrp {
 		fsl,pins = <
 			MX8MP_IOMUXC_NAND_DATA01__GPIO3_IO07	0x140
@@ -825,7 +924,12 @@ MX8MP_IOMUXC_UART4_TXD__UART4_DCE_TX	0x140
 	pinctrl_usb1: usb1grp {
 		fsl,pins = <
 			MX8MP_IOMUXC_GPIO1_IO13__USB1_OTG_OC	0x140
-			MX8MP_IOMUXC_GPIO1_IO10__USB1_OTG_ID	0x140
+		>;
+	};
+
+	pinctrl_usbcon1: usb1congrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO10__GPIO1_IO10	0x140
 		>;
 	};
 
@@ -840,6 +944,28 @@ MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3	0x1d0
 		>;
 	};
 
+	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK	0x194
+			MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD	0x1d4
+			MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0	0x1d4
+			MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1	0x1d4
+			MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2	0x1d4
+			MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3	0x1d4
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK	0x196
+			MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD	0x1d6
+			MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0	0x1d6
+			MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1	0x1d6
+			MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2	0x1d6
+			MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3	0x1d6
+		>;
+	};
+
 	pinctrl_usdhc3: usdhc3grp {
 		fsl,pins = <
 			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK	0x190

arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi

@@ -146,6 +146,22 @@ reserved-memory {
 	};
 };
 
+&A53_0 {
+	cpu-supply = <&reg_vdd_arm>;
+};
+
+&A53_1 {
+	cpu-supply = <&reg_vdd_arm>;
+};
+
+&A53_2 {
+	cpu-supply = <&reg_vdd_arm>;
+};
+
+&A53_3 {
+	cpu-supply = <&reg_vdd_arm>;
+};
+
 &cpu_alert0 {
 	temperature = <95000>;
 };
@@ -286,7 +302,6 @@ &flexcan1 {
 	status = "disabled";
 };
 
-
 /* Verdin CAN_2 */
 &flexcan2 {
 	pinctrl-names = "default";
@@ -454,7 +469,7 @@ BUCK1 {
 				regulator-ramp-delay = <3125>;
 			};
 
-			BUCK2 {
+			reg_vdd_arm: BUCK2 {
 				nxp,dvs-run-voltage = <950000>;
 				nxp,dvs-standby-voltage = <850000>;
 				regulator-always-on;

arch/arm64/boot/dts/freescale/imx8mp.dtsi

@@ -5,8 +5,10 @@
 
 #include <dt-bindings/clock/imx8mp-clock.h>
 #include <dt-bindings/power/imx8mp-power.h>
+#include <dt-bindings/reset/imx8mp-reset.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/interconnect/fsl,imx8mp.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/thermal/thermal.h>
 
@@ -469,6 +471,11 @@ snvs_pwrkey: snvs-powerkey {
 					wakeup-source;
 					status = "disabled";
 				};
+
+				snvs_lpgpr: snvs-lpgpr {
+					compatible = "fsl,imx8mp-snvs-lpgpr",
+						     "fsl,imx7d-snvs-lpgpr";
+				};
 			};
 
 			clk: clock-controller@30380000 {
@@ -597,6 +604,33 @@ pgc_ispdwp: power-domain@18 {
 						reg = <IMX8MP_POWER_DOMAIN_MEDIAMIX_ISPDWP>;
 						clocks = <&clk IMX8MP_CLK_MEDIA_ISP_ROOT>;
 					};
+
+					pgc_vpumix: power-domain@19 {
+						#power-domain-cells = <0>;
+						reg = <IMX8MP_POWER_DOMAIN_VPUMIX>;
+						clocks =<&clk IMX8MP_CLK_VPU_ROOT>;
+					};
+
+					pgc_vpu_g1: power-domain@20 {
+						#power-domain-cells = <0>;
+						power-domains = <&pgc_vpumix>;
+						reg = <IMX8MP_POWER_DOMAIN_VPU_G1>;
+						clocks = <&clk IMX8MP_CLK_VPU_G1_ROOT>;
+					};
+
+					pgc_vpu_g2: power-domain@21 {
+						#power-domain-cells = <0>;
+						power-domains = <&pgc_vpumix>;
+						reg = <IMX8MP_POWER_DOMAIN_VPU_G2>;
+						clocks = <&clk IMX8MP_CLK_VPU_G2_ROOT>;
+					};
+
+					pgc_vpu_vc8000e: power-domain@22 {
+						#power-domain-cells = <0>;
+						power-domains = <&pgc_vpumix>;
+						reg = <IMX8MP_POWER_DOMAIN_VPU_VC8000E>;
+						clocks = <&clk IMX8MP_CLK_VPU_VC8KE_ROOT>;
+					};
 				};
 			};
 		};
@@ -1064,6 +1098,18 @@ media_blk_ctrl: blk-ctrl@32ec0000 {
 						     "lcdif1", "isi", "mipi-csi2",
 						     "lcdif2", "isp", "dwe",
 						     "mipi-dsi2";
+				interconnects =
+					<&noc IMX8MP_ICM_LCDIF_RD &noc IMX8MP_ICN_MEDIA>,
+					<&noc IMX8MP_ICM_LCDIF_WR &noc IMX8MP_ICN_MEDIA>,
+					<&noc IMX8MP_ICM_ISI0 &noc IMX8MP_ICN_MEDIA>,
+					<&noc IMX8MP_ICM_ISI1 &noc IMX8MP_ICN_MEDIA>,
+					<&noc IMX8MP_ICM_ISI2 &noc IMX8MP_ICN_MEDIA>,
+					<&noc IMX8MP_ICM_ISP0 &noc IMX8MP_ICN_MEDIA>,
+					<&noc IMX8MP_ICM_ISP1 &noc IMX8MP_ICN_MEDIA>,
+					<&noc IMX8MP_ICM_DWE &noc IMX8MP_ICN_MEDIA>;
+				interconnect-names = "lcdif-rd", "lcdif-wr", "isi0",
+						     "isi1", "isi2", "isp0", "isp1",
+						     "dwe";
 				clocks = <&clk IMX8MP_CLK_MEDIA_APB_ROOT>,
 					 <&clk IMX8MP_CLK_MEDIA_AXI_ROOT>,
 					 <&clk IMX8MP_CLK_MEDIA_CAM1_PIX_ROOT>,
@@ -1084,6 +1130,17 @@ media_blk_ctrl: blk-ctrl@32ec0000 {
 				#power-domain-cells = <1>;
 			};
 
+			pcie_phy: pcie-phy@32f00000 {
+				compatible = "fsl,imx8mp-pcie-phy";
+				reg = <0x32f00000 0x10000>;
+				resets = <&src IMX8MP_RESET_PCIEPHY>,
+					 <&src IMX8MP_RESET_PCIEPHY_PERST>;
+				reset-names = "pciephy", "perst";
+				power-domains = <&hsio_blk_ctrl IMX8MP_HSIOBLK_PD_PCIE_PHY>;
+				#phy-cells = <0>;
+				status = "disabled";
+			};
+
 			hsio_blk_ctrl: blk-ctrl@32f10000 {
 				compatible = "fsl,imx8mp-hsio-blk-ctrl", "syscon";
 				reg = <0x32f10000 0x24>;
@@ -1095,10 +1152,46 @@ hsio_blk_ctrl: blk-ctrl@32f10000 {
 						<&pgc_hsiomix>, <&pgc_pcie_phy>;
 				power-domain-names = "bus", "usb", "usb-phy1",
 						     "usb-phy2", "pcie", "pcie-phy";
+				interconnects = <&noc IMX8MP_ICM_NOC_PCIE &noc IMX8MP_ICN_HSIO>,
+						<&noc IMX8MP_ICM_USB1 &noc IMX8MP_ICN_HSIO>,
+						<&noc IMX8MP_ICM_USB2 &noc IMX8MP_ICN_HSIO>,
+						<&noc IMX8MP_ICM_PCIE &noc IMX8MP_ICN_HSIO>;
+				interconnect-names = "noc-pcie", "usb1", "usb2", "pcie";
 				#power-domain-cells = <1>;
 			};
 		};
 
+		pcie: pcie@33800000 {
+			compatible = "fsl,imx8mp-pcie";
+			reg = <0x33800000 0x400000>, <0x1ff00000 0x80000>;
+			reg-names = "dbi", "config";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			bus-range = <0x00 0xff>;
+			ranges =  <0x81000000 0 0x00000000 0x1ff80000 0 0x00010000>, /* downstream I/O 64KB */
+				  <0x82000000 0 0x18000000 0x18000000 0 0x07f00000>; /* non-prefetchable memory */
+			num-lanes = <1>;
+			num-viewport = <4>;
+			interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi";
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &gic GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &gic GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &gic GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &gic GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+			fsl,max-link-speed = <3>;
+			linux,pci-domain = <0>;
+			power-domains = <&hsio_blk_ctrl IMX8MP_HSIOBLK_PD_PCIE>;
+			resets = <&src IMX8MP_RESET_PCIE_CTRL_APPS_EN>,
+				 <&src IMX8MP_RESET_PCIE_CTRL_APPS_TURNOFF>;
+			reset-names = "apps", "turnoff";
+			phys = <&pcie_phy>;
+			phy-names = "pcie-phy";
+			status = "disabled";
+		};
+
 		gpu3d: gpu@38000000 {
 			compatible = "vivante,gc";
 			reg = <0x38000000 0x8000>;
@@ -1130,6 +1223,23 @@ gpu2d: gpu@38008000 {
 			power-domains = <&pgc_gpu2d>;
 		};
 
+		vpumix_blk_ctrl: blk-ctrl@38330000 {
+			compatible = "fsl,imx8mp-vpu-blk-ctrl", "syscon";
+			reg = <0x38330000 0x100>;
+			#power-domain-cells = <1>;
+			power-domains = <&pgc_vpumix>, <&pgc_vpu_g1>,
+					<&pgc_vpu_g2>, <&pgc_vpu_vc8000e>;
+			power-domain-names = "bus", "g1", "g2", "vc8000e";
+			clocks = <&clk IMX8MP_CLK_VPU_G1_ROOT>,
+				 <&clk IMX8MP_CLK_VPU_G2_ROOT>,
+				 <&clk IMX8MP_CLK_VPU_VC8KE_ROOT>;
+			clock-names = "g1", "g2", "vc8000e";
+			interconnects = <&noc IMX8MP_ICM_VPU_G1 &noc IMX8MP_ICN_VIDEO>,
+					<&noc IMX8MP_ICM_VPU_G2 &noc IMX8MP_ICN_VIDEO>,
+					<&noc IMX8MP_ICM_VPU_H1 &noc IMX8MP_ICN_VIDEO>;
+			interconnect-names = "g1", "g2", "vc8000e";
+		};
+
 		gic: interrupt-controller@38800000 {
 			compatible = "arm,gic-v3";
 			reg = <0x38800000 0x10000>,

arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi

@@ -7,6 +7,7 @@
 
 #include "dt-bindings/input/input.h"
 #include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/leds/common.h>
 #include "dt-bindings/pwm/pwm.h"
 #include "dt-bindings/usb/pd.h"
 #include "imx8mq.dtsi"
@@ -54,6 +55,31 @@ key-vol-up {
 		};
 	};
 
+	led-controller {
+		compatible = "pwm-leds";
+
+		led-0 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_BLUE>;
+			max-brightness = <248>;
+			pwms = <&pwm2 0 50000 0>;
+		};
+
+		led-1 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			max-brightness = <248>;
+			pwms = <&pwm4 0 50000 0>;
+		};
+
+		led-2 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_RED>;
+			max-brightness = <248>;
+			pwms = <&pwm3 0 50000 0>;
+		};
+	};
+
 	reg_aud_1v8: regulator-audio-1v8 {
 		compatible = "regulator-fixed";
 		pinctrl-names = "default";
@@ -747,6 +773,10 @@ typec_pd: usb-pd@3f {
 		interrupt-names = "irq";
 
 		connector {
+			compatible = "usb-c-connector";
+			label = "USB-C";
+			data-role = "dual";
+
 			ports {
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -1070,6 +1100,12 @@ &i2c4 {
 	pinctrl-0 = <&pinctrl_i2c4>;
 	status = "okay";
 
+	vcm@c {
+		compatible = "dongwoon,dw9714";
+		reg = <0x0c>;
+		vcc-supply = <&reg_csi_1v8>;
+	};
+
 	bat: fuel-gauge@36 {
 		compatible = "maxim,max17055";
 		reg = <0x36>;
@@ -1077,6 +1113,7 @@ bat: fuel-gauge@36 {
 		interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_gauge>;
+		power-supplies = <&bq25895>;
 		maxim,over-heat-temp = <700>;
 		maxim,over-volt = <4500>;
 		maxim,rsns-microohm = <5000>;
@@ -1106,8 +1143,6 @@ &lcdif {
 };
 
 &mipi_csi1 {
-	#address-cells = <1>;
-	#size-cells = <0>;
 	status = "okay";
 
 	ports {
@@ -1265,6 +1300,7 @@ &usb_dwc3_0 {
 	#size-cells = <0>;
 	dr_mode = "otg";
 	snps,dis_u3_susphy_quirk;
+	usb-role-switch;
 	status = "okay";
 
 	port@0 {

arch/arm64/boot/dts/freescale/imx8mq-mnt-reform2.dts

@@ -210,7 +210,6 @@ &pwm2 {
 	status = "okay";
 };
 
-
 &reg_1p8v {
 	vin-supply = <&reg_main_5v>;
 };

arch/arm64/boot/dts/freescale/imx8mq.dtsi

@@ -534,7 +534,7 @@ wdog3: watchdog@302a0000 {
 				status = "disabled";
 			};
 
-			sdma2: sdma@302c0000 {
+			sdma2: dma-controller@302c0000 {
 				compatible = "fsl,imx8mq-sdma","fsl,imx7d-sdma";
 				reg = <0x302c0000 0x10000>;
 				interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
@@ -1302,7 +1302,7 @@ qspi0: spi@30bb0000 {
 				status = "disabled";
 			};
 
-			sdma1: sdma@30bd0000 {
+			sdma1: dma-controller@30bd0000 {
 				compatible = "fsl,imx8mq-sdma","fsl,imx7d-sdma";
 				reg = <0x30bd0000 0x10000>;
 				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;

arch/arm64/boot/dts/freescale/imx8ulp-evk.dts

@@ -19,6 +19,21 @@ memory@80000000 {
 		device_type = "memory";
 		reg = <0x0 0x80000000 0 0x80000000>;
 	};
+
+	clock_ext_rmii: clock-ext-rmii {
+		compatible = "fixed-clock";
+		clock-frequency = <50000000>;
+		clock-output-names = "ext_rmii_clk";
+		#clock-cells = <0>;
+	};
+
+	clock_ext_ts: clock-ext-ts {
+		compatible = "fixed-clock";
+		/* External ts clock is 50MHZ from PHY on EVK board. */
+		clock-frequency = <50000000>;
+		clock-output-names = "ext_ts_clk";
+		#clock-cells = <0>;
+	};
 };
 
 &lpuart5 {
@@ -38,7 +53,49 @@ &usdhc0 {
 	status = "okay";
 };
 
+&fec {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_enet>;
+	pinctrl-1 = <&pinctrl_enet>;
+	clocks = <&cgc1 IMX8ULP_CLK_XBAR_DIVBUS>,
+		 <&pcc4 IMX8ULP_CLK_ENET>,
+		 <&cgc1 IMX8ULP_CLK_ENET_TS_SEL>,
+		 <&clock_ext_rmii>;
+	clock-names = "ipg", "ahb", "ptp", "enet_clk_ref";
+	assigned-clocks = <&cgc1 IMX8ULP_CLK_ENET_TS_SEL>;
+	assigned-clock-parents = <&clock_ext_ts>;
+	phy-mode = "rmii";
+	phy-handle = <&ethphy>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy: ethernet-phy@1 {
+			reg = <1>;
+			micrel,led-mode = <1>;
+		};
+	};
+};
+
 &iomuxc1 {
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX8ULP_PAD_PTE15__ENET0_MDC     0x43
+			MX8ULP_PAD_PTE14__ENET0_MDIO    0x43
+			MX8ULP_PAD_PTE17__ENET0_RXER    0x43
+			MX8ULP_PAD_PTE18__ENET0_CRS_DV  0x43
+			MX8ULP_PAD_PTF1__ENET0_RXD0     0x43
+			MX8ULP_PAD_PTE20__ENET0_RXD1    0x43
+			MX8ULP_PAD_PTE16__ENET0_TXEN    0x43
+			MX8ULP_PAD_PTE23__ENET0_TXD0    0x43
+			MX8ULP_PAD_PTE22__ENET0_TXD1    0x43
+			MX8ULP_PAD_PTE19__ENET0_REFCLK  0x43
+			MX8ULP_PAD_PTF10__ENET0_1588_CLKIN 0x43
+		>;
+	};
+
 	pinctrl_lpuart5: lpuart5grp {
 		fsl,pins = <
 			MX8ULP_PAD_PTF14__LPUART5_TX	0x3

arch/arm64/boot/dts/freescale/imx8ulp.dtsi

@@ -16,6 +16,7 @@ / {
 	#size-cells = <2>;
 
 	aliases {
+		ethernet0 = &fec;
 		gpio0 = &gpiod;
 		gpio1 = &gpioe;
 		gpio2 = &gpiof;
@@ -62,6 +63,14 @@ gic: interrupt-controller@2d400000 {
 		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
 	};
 
+	pmu {
+		compatible = "arm,cortex-a35-pmu";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 7
+			     (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
+		interrupt-affinity = <&A35_0>, <&A35_1>;
+	};
+
 	psci {
 		compatible = "arm,psci-1.0";
 		method = "smc";
@@ -111,7 +120,7 @@ sram@2201f000 {
 		#size-cells = <1>;
 		ranges = <0 0x0 0x2201f000 0x1000>;
 
-		scmi_buf: scmi-buf@0 {
+		scmi_buf: scmi-sram-section@0 {
 			compatible = "arm,scmi-shmem";
 			reg = <0x0 0x400>;
 		};
@@ -143,6 +152,13 @@ soc: soc@0 {
 		#size-cells = <1>;
 		ranges = <0x0 0x0 0x0 0x40000000>;
 
+		s4muap: mailbox@27020000 {
+			compatible = "fsl,imx8ulp-mu-s4";
+			reg = <0x27020000 0x10000>;
+			interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+			#mbox-cells = <2>;
+		};
+
 		per_bridge3: bus@29000000 {
 			compatible = "simple-bus";
 			reg = <0x29000000 0x800000>;
@@ -150,6 +166,23 @@ per_bridge3: bus@29000000 {
 			#size-cells = <1>;
 			ranges;
 
+			mu: mailbox@29220000 {
+				compatible = "fsl,imx8ulp-mu";
+				reg = <0x29220000 0x10000>;
+				interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+				#mbox-cells = <2>;
+				status = "disabled";
+			};
+
+			mu3: mailbox@29230000 {
+				compatible = "fsl,imx8ulp-mu";
+				reg = <0x29230000 0x10000>;
+				interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pcc3 IMX8ULP_CLK_MU3_A>;
+				#mbox-cells = <2>;
+				status = "disabled";
+			};
+
 			wdog3: watchdog@292a0000 {
 				compatible = "fsl,imx8ulp-wdt", "fsl,imx7ulp-wdt";
 				reg = <0x292a0000 0x10000>;
@@ -163,8 +196,6 @@ wdog3: watchdog@292a0000 {
 			cgc1: clock-controller@292c0000 {
 				compatible = "fsl,imx8ulp-cgc1";
 				reg = <0x292c0000 0x10000>;
-				clocks = <&rosc>, <&sosc>, <&frosc>, <&lposc>;
-				clock-names = "rosc", "sosc", "frosc", "lposc";
 				#clock-cells = <1>;
 			};
 
@@ -192,7 +223,7 @@ lpi2c4: i2c@29370000 {
 					 <&pcc3 IMX8ULP_CLK_LPI2C4>;
 				clock-names = "per", "ipg";
 				assigned-clocks = <&pcc3 IMX8ULP_CLK_LPI2C4>;
-				assigned-clock-parents = <&cgc1 IMX8ULP_CLK_XBAR_DIVBUS>;
+				assigned-clock-parents = <&cgc1 IMX8ULP_CLK_FROSC_DIV2>;
 				assigned-clock-rates = <48000000>;
 				status = "disabled";
 			};
@@ -205,7 +236,7 @@ lpi2c5: i2c@29380000 {
 					 <&pcc3 IMX8ULP_CLK_LPI2C5>;
 				clock-names = "per", "ipg";
 				assigned-clocks = <&pcc3 IMX8ULP_CLK_LPI2C5>;
-				assigned-clock-parents = <&cgc1 IMX8ULP_CLK_XBAR_DIVBUS>;
+				assigned-clock-parents = <&cgc1 IMX8ULP_CLK_FROSC_DIV2>;
 				assigned-clock-rates = <48000000>;
 				status = "disabled";
 			};
@@ -238,8 +269,8 @@ lpspi4: spi@293b0000 {
 					 <&pcc3 IMX8ULP_CLK_LPSPI4>;
 				clock-names = "per", "ipg";
 				assigned-clocks = <&pcc3 IMX8ULP_CLK_LPSPI4>;
-				assigned-clock-parents = <&cgc1 IMX8ULP_CLK_XBAR_DIVBUS>;
-				assigned-clock-rates = <16000000>;
+				assigned-clock-parents = <&cgc1 IMX8ULP_CLK_FROSC_DIV2>;
+				assigned-clock-rates = <48000000>;
 				status = "disabled";
 			};
 
@@ -253,8 +284,8 @@ lpspi5: spi@293c0000 {
 					 <&pcc3 IMX8ULP_CLK_LPSPI5>;
 				clock-names = "per", "ipg";
 				assigned-clocks = <&pcc3 IMX8ULP_CLK_LPSPI5>;
-				assigned-clock-parents = <&cgc1 IMX8ULP_CLK_XBAR_DIVBUS>;
-				assigned-clock-rates = <16000000>;
+				assigned-clock-parents = <&cgc1 IMX8ULP_CLK_FROSC_DIV2>;
+				assigned-clock-rates = <48000000>;
 				status = "disabled";
 			};
 		};
@@ -280,7 +311,7 @@ lpi2c6: i2c@29840000 {
 					 <&pcc4 IMX8ULP_CLK_LPI2C6>;
 				clock-names = "per", "ipg";
 				assigned-clocks = <&pcc4 IMX8ULP_CLK_LPI2C6>;
-				assigned-clock-parents = <&cgc1 IMX8ULP_CLK_XBAR_DIVBUS>;
+				assigned-clock-parents = <&cgc1 IMX8ULP_CLK_FROSC_DIV2>;
 				assigned-clock-rates = <48000000>;
 				status = "disabled";
 			};
@@ -293,7 +324,7 @@ lpi2c7: i2c@29850000 {
 					 <&pcc4 IMX8ULP_CLK_LPI2C7>;
 				clock-names = "per", "ipg";
 				assigned-clocks = <&pcc4 IMX8ULP_CLK_LPI2C7>;
-				assigned-clock-parents = <&cgc1 IMX8ULP_CLK_XBAR_DIVBUS>;
+				assigned-clock-parents = <&cgc1 IMX8ULP_CLK_FROSC_DIV2>;
 				assigned-clock-rates = <48000000>;
 				status = "disabled";
 			};
@@ -365,6 +396,16 @@ usdhc2: mmc@298f0000 {
 				bus-width = <4>;
 				status = "disabled";
 			};
+
+			fec: ethernet@29950000 {
+				compatible = "fsl,imx8ulp-fec", "fsl,imx6ul-fec", "fsl,imx6q-fec";
+				reg = <0x29950000 0x10000>;
+				interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "int0";
+				fsl,num-tx-queues = <1>;
+				fsl,num-rx-queues = <1>;
+				status = "disabled";
+			};
 		};
 
 		gpioe: gpio@2d000080 {
@@ -405,8 +446,6 @@ per_bridge5: bus@2d800000 {
 			cgc2: clock-controller@2da60000 {
 				compatible = "fsl,imx8ulp-cgc2";
 				reg = <0x2da60000 0x10000>;
-				clocks = <&sosc>, <&frosc>;
-				clock-names = "sosc", "frosc";
 				#clock-cells = <1>;
 			};
 

arch/arm64/boot/dts/freescale/imx93.dtsi

@@ -7,6 +7,7 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/fsl,imx93-power.h>
 
 #include "imx93-pinfunc.h"
 
@@ -16,6 +17,14 @@ / {
 	#size-cells = <2>;
 
 	aliases {
+		i2c0 = &lpi2c1;
+		i2c1 = &lpi2c2;
+		i2c2 = &lpi2c3;
+		i2c3 = &lpi2c4;
+		i2c4 = &lpi2c5;
+		i2c5 = &lpi2c6;
+		i2c6 = &lpi2c7;
+		i2c7 = &lpi2c8;
 		mmc0 = &usdhc1;
 		mmc1 = &usdhc2;
 		mmc2 = &usdhc3;
@@ -72,6 +81,11 @@ clk_ext1: clock-ext1 {
 		clock-output-names = "clk_ext1";
 	};
 
+	pmu {
+		compatible = "arm,cortex-a55-pmu";
+		interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
 	psci {
 		compatible = "arm,psci-1.0";
 		method = "smc";
@@ -112,6 +126,11 @@ aips1: bus@44000000 {
 			#size-cells = <1>;
 			ranges;
 
+			anomix_ns_gpr: syscon@44210000 {
+				compatible = "fsl,imx93-aonmix-ns-syscfg", "syscon";
+				reg = <0x44210000 0x1000>;
+			};
+
 			mu1: mailbox@44230000 {
 				compatible = "fsl,imx93-mu", "fsl,imx8ulp-mu";
 				reg = <0x44230000 0x10000>;
@@ -128,6 +147,50 @@ system_counter: timer@44290000 {
 				clock-names = "per";
 			};
 
+			lpi2c1: i2c@44340000 {
+				compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
+				reg = <0x44340000 0x10000>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPI2C1_GATE>,
+					 <&clk IMX93_CLK_BUS_AON>;
+				clock-names = "per", "ipg";
+				status = "disabled";
+			};
+
+			lpi2c2: i2c@44350000 {
+				compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
+				reg = <0x44350000 0x10000>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPI2C2_GATE>,
+					 <&clk IMX93_CLK_BUS_AON>;
+				clock-names = "per", "ipg";
+				status = "disabled";
+			};
+
+			lpspi1: spi@44360000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx93-spi", "fsl,imx7ulp-spi";
+				reg = <0x44360000 0x10000>;
+				interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPSPI1_GATE>,
+					 <&clk IMX93_CLK_BUS_AON>;
+				clock-names = "per", "ipg";
+				status = "disabled";
+			};
+
+			lpspi2: spi@44370000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx93-spi", "fsl,imx7ulp-spi";
+				reg = <0x44370000 0x10000>;
+				interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPSPI2_GATE>,
+					 <&clk IMX93_CLK_BUS_AON>;
+				clock-names = "per", "ipg";
+				status = "disabled";
+			};
+
 			lpuart1: serial@44380000 {
 				compatible = "fsl,imx93-lpuart", "fsl,imx7ulp-lpuart";
 				reg = <0x44380000 0x1000>;
@@ -161,6 +224,30 @@ clk: clock-controller@44450000 {
 				status = "okay";
 			};
 
+			src: system-controller@44460000 {
+				compatible = "fsl,imx93-src", "syscon";
+				reg = <0x44460000 0x10000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges;
+
+				mediamix: power-domain@44462400 {
+					compatible = "fsl,imx93-src-slice";
+					reg = <0x44462400 0x400>, <0x44465800 0x400>;
+					#power-domain-cells = <0>;
+					clocks = <&clk IMX93_CLK_MEDIA_AXI>,
+						 <&clk IMX93_CLK_MEDIA_APB>;
+				};
+
+				mlmix: power-domain@44461800 {
+					compatible = "fsl,imx93-src-slice";
+					reg = <0x44461800 0x400>, <0x44464800 0x400>;
+					#power-domain-cells = <0>;
+					clocks = <&clk IMX93_CLK_ML_APB>,
+						 <&clk IMX93_CLK_ML>;
+				};
+			};
+
 			anatop: anatop@44480000 {
 				compatible = "fsl,imx93-anatop", "syscon";
 				reg = <0x44480000 0x10000>;
@@ -174,6 +261,11 @@ aips2: bus@42000000 {
 			#size-cells = <1>;
 			ranges;
 
+			wakeupmix_gpr: syscon@42420000 {
+				compatible = "fsl,imx93-wakeupmix-syscfg", "syscon";
+				reg = <0x42420000 0x1000>;
+			};
+
 			mu2: mailbox@42440000 {
 				compatible = "fsl,imx93-mu", "fsl,imx8ulp-mu";
 				reg = <0x42440000 0x10000>;
@@ -182,6 +274,26 @@ mu2: mailbox@42440000 {
 				status = "disabled";
 			};
 
+			lpi2c3: i2c@42530000 {
+				compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
+				reg = <0x42530000 0x10000>;
+				interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPI2C3_GATE>,
+					 <&clk IMX93_CLK_BUS_WAKEUP>;
+				clock-names = "per", "ipg";
+				status = "disabled";
+			};
+
+			lpi2c4: i2c@42540000 {
+				compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
+				reg = <0x42540000 0x10000>;
+				interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPI2C4_GATE>,
+					 <&clk IMX93_CLK_BUS_WAKEUP>;
+				clock-names = "per", "ipg";
+				status = "disabled";
+			};
+
 			lpuart3: serial@42570000 {
 				compatible = "fsl,imx93-lpuart", "fsl,imx7ulp-lpuart";
 				reg = <0x42570000 0x1000>;
@@ -235,6 +347,47 @@ lpuart8: serial@426a0000 {
 				clock-names = "ipg";
 				status = "disabled";
 			};
+
+			lpi2c5: i2c@426b0000 {
+				compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
+				reg = <0x426b0000 0x10000>;
+				interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPI2C5_GATE>,
+					 <&clk IMX93_CLK_BUS_WAKEUP>;
+				clock-names = "per", "ipg";
+				status = "disabled";
+			};
+
+			lpi2c6: i2c@426c0000 {
+				compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
+				reg = <0x426c0000 0x10000>;
+				interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPI2C6_GATE>,
+					 <&clk IMX93_CLK_BUS_WAKEUP>;
+				clock-names = "per", "ipg";
+				status = "disabled";
+			};
+
+			lpi2c7: i2c@426d0000 {
+				compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
+				reg = <0x426d0000 0x10000>;
+				interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPI2C7_GATE>,
+					 <&clk IMX93_CLK_BUS_WAKEUP>;
+				clock-names = "per", "ipg";
+				status = "disabled";
+			};
+
+			lpi2c8: i2c@426e0000 {
+				compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
+				reg = <0x426e0000 0x10000>;
+				interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPI2C8_GATE>,
+					 <&clk IMX93_CLK_BUS_WAKEUP>;
+				clock-names = "per", "ipg";
+				status = "disabled";
+			};
+
 		};
 
 		aips3: bus@42800000 {
@@ -248,8 +401,8 @@ usdhc1: mmc@42850000 {
 				compatible = "fsl,imx93-usdhc", "fsl,imx8mm-usdhc";
 				reg = <0x42850000 0x10000>;
 				interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX93_CLK_DUMMY>,
-					 <&clk IMX93_CLK_DUMMY>,
+				clocks = <&clk IMX93_CLK_BUS_WAKEUP>,
+					 <&clk IMX93_CLK_WAKEUP_AXI>,
 					 <&clk IMX93_CLK_USDHC1_GATE>;
 				clock-names = "ipg", "ahb", "per";
 				bus-width = <8>;
@@ -262,8 +415,8 @@ usdhc2: mmc@42860000 {
 				compatible = "fsl,imx93-usdhc", "fsl,imx8mm-usdhc";
 				reg = <0x42860000 0x10000>;
 				interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX93_CLK_DUMMY>,
-					 <&clk IMX93_CLK_DUMMY>,
+				clocks = <&clk IMX93_CLK_BUS_WAKEUP>,
+					 <&clk IMX93_CLK_WAKEUP_AXI>,
 					 <&clk IMX93_CLK_USDHC2_GATE>;
 				clock-names = "ipg", "ahb", "per";
 				bus-width = <4>;
@@ -276,8 +429,8 @@ usdhc3: mmc@428b0000 {
 				compatible = "fsl,imx93-usdhc", "fsl,imx8mm-usdhc";
 				reg = <0x428b0000 0x10000>;
 				interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX93_CLK_DUMMY>,
-					 <&clk IMX93_CLK_DUMMY>,
+				clocks = <&clk IMX93_CLK_BUS_WAKEUP>,
+					 <&clk IMX93_CLK_WAKEUP_AXI>,
 					 <&clk IMX93_CLK_USDHC3_GATE>;
 				clock-names = "ipg", "ahb", "per";
 				bus-width = <4>;
@@ -295,6 +448,9 @@ gpio2: gpio@43810080 {
 			interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
+			clocks = <&clk IMX93_CLK_GPIO2_GATE>,
+				 <&clk IMX93_CLK_GPIO2_GATE>;
+			clock-names = "gpio", "port";
 			gpio-ranges = <&iomuxc 0 32 32>;
 		};
 
@@ -306,6 +462,9 @@ gpio3: gpio@43820080 {
 			interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
+			clocks = <&clk IMX93_CLK_GPIO3_GATE>,
+				 <&clk IMX93_CLK_GPIO3_GATE>;
+			clock-names = "gpio", "port";
 			gpio-ranges = <&iomuxc 0 64 32>;
 		};
 
@@ -317,6 +476,9 @@ gpio4: gpio@43830080 {
 			interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
+			clocks = <&clk IMX93_CLK_GPIO4_GATE>,
+				 <&clk IMX93_CLK_GPIO4_GATE>;
+			clock-names = "gpio", "port";
 			gpio-ranges = <&iomuxc 0 96 32>;
 		};
 
@@ -328,7 +490,39 @@ gpio1: gpio@47400080 {
 			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
+			clocks = <&clk IMX93_CLK_GPIO1_GATE>,
+				 <&clk IMX93_CLK_GPIO1_GATE>;
+			clock-names = "gpio", "port";
 			gpio-ranges = <&iomuxc 0 0 32>;
 		};
+
+		s4muap: mailbox@47520000 {
+			compatible = "fsl,imx93-mu-s4";
+			reg = <0x47520000 0x10000>;
+			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "txirq", "rxirq";
+			#mbox-cells = <2>;
+		};
+
+		media_blk_ctrl: system-controller@4ac10000 {
+			compatible = "fsl,imx93-media-blk-ctrl", "syscon";
+			reg = <0x4ac10000 0x10000>;
+			power-domains = <&mediamix>;
+			clocks = <&clk IMX93_CLK_MEDIA_APB>,
+				 <&clk IMX93_CLK_MEDIA_AXI>,
+				 <&clk IMX93_CLK_NIC_MEDIA_GATE>,
+				 <&clk IMX93_CLK_MEDIA_DISP_PIX>,
+				 <&clk IMX93_CLK_CAM_PIX>,
+				 <&clk IMX93_CLK_PXP_GATE>,
+				 <&clk IMX93_CLK_LCDIF_GATE>,
+				 <&clk IMX93_CLK_ISI_GATE>,
+				 <&clk IMX93_CLK_MIPI_CSI_GATE>,
+				 <&clk IMX93_CLK_MIPI_DSI_GATE>;
+			clock-names = "apb", "axi", "nic", "disp", "cam",
+				      "pxp", "lcdif", "isi", "csi", "dsi";
+			#power-domain-cells = <1>;
+			status = "disabled";
+		};
 	};
 };