Merge flatcap.org:/home/flatcap/backup/bk/ntfs-2.6

into flatcap.org:/home/flatcap/backup/bk/ntfs-2.6-devel

drivers/pci/hotplug/rpaphp_pci.c

@@ -362,7 +362,7 @@ static void rpaphp_eeh_remove_bus_device(struct pci_dev *dev)
 int rpaphp_unconfig_pci_adapter(struct slot *slot)
 {
 	int retval = 0;
-	struct list_head *ln;
+	struct list_head *ln, *tmp;
 
 	dbg("Entry %s: slot[%s]\n", __FUNCTION__, slot->name);
 	if (list_empty(&slot->dev.pci_funcs)) {
@@ -373,7 +373,7 @@ int rpaphp_unconfig_pci_adapter(struct slot *slot)
 		goto exit;
 	}
 	/* remove the devices from the pci core */
-	list_for_each (ln, &slot->dev.pci_funcs) {
+	list_for_each_safe (ln, tmp, &slot->dev.pci_funcs) {
 		struct rpaphp_pci_func *func;
 	
 		func = list_entry(ln, struct rpaphp_pci_func, sibling);

drivers/usb/class/usblp.c

@@ -397,10 +397,6 @@ static void usblp_cleanup (struct usblp *usblp)
 {
 	info("usblp%d: removed", usblp->minor);
 
-	usb_buffer_free (usblp->dev, USBLP_BUF_SIZE,
-			usblp->writebuf, usblp->writeurb->transfer_dma);
-	usb_buffer_free (usblp->dev, USBLP_BUF_SIZE,
-			usblp->readbuf, usblp->readurb->transfer_dma);
 	kfree (usblp->device_id_string);
 	kfree (usblp->statusbuf);
 	usb_free_urb(usblp->writeurb);
@@ -1159,6 +1155,10 @@ static void usblp_disconnect(struct usb_interface *intf)
 	usb_set_intfdata (intf, NULL);
 
 	usblp_unlink_urbs(usblp);
+	usb_buffer_free (usblp->dev, USBLP_BUF_SIZE,
+			usblp->writebuf, usblp->writeurb->transfer_dma);
+	usb_buffer_free (usblp->dev, USBLP_BUF_SIZE,
+			usblp->readbuf, usblp->readurb->transfer_dma);
 
 	if (!usblp->used)
 		usblp_cleanup (usblp);

drivers/usb/gadget/net2280.c

@@ -303,13 +303,16 @@ static void ep_reset (struct net2280_regs __iomem *regs, struct net2280_ep *ep)
 	/* init to our chosen defaults, notably so that we NAK OUT
 	 * packets until the driver queues a read (+note erratum 0112)
 	 */
-	writel (  (1 << SET_NAK_OUT_PACKETS_MODE)
+	tmp = (1 << SET_NAK_OUT_PACKETS_MODE)
 		| (1 << SET_NAK_OUT_PACKETS)
 		| (1 << CLEAR_EP_HIDE_STATUS_PHASE)
-		| (1 << CLEAR_INTERRUPT_MODE)
-		| (1 << CLEAR_ENDPOINT_TOGGLE)
-		| (1 << CLEAR_ENDPOINT_HALT)
-		, &ep->regs->ep_rsp);
+		| (1 << CLEAR_INTERRUPT_MODE);
+
+	if (ep->num != 0) {
+		tmp |= (1 << CLEAR_ENDPOINT_TOGGLE)
+			| (1 << CLEAR_ENDPOINT_HALT);
+	}
+	writel (tmp, &ep->regs->ep_rsp);
 
 	/* scrub most status bits, and flush any fifo state */
 	writel (  (1 << TIMEOUT)
@@ -1920,8 +1923,6 @@ static void ep0_start (struct net2280 *dev)
 		, &dev->usb->stdrsp);
 	writel (  (1 << USB_ROOT_PORT_WAKEUP_ENABLE)
 		| (1 << SELF_POWERED_USB_DEVICE)
-		/* erratum 0102 workaround */
-		| ((dev->chiprev == 0100) ? 0 : 1) << SUSPEND_IMMEDIATELY
 		| (1 << REMOTE_WAKEUP_SUPPORT)
 		| (dev->softconnect << USB_DETECT_ENABLE)
 		| (1 << SELF_POWERED_STATUS)
@@ -2047,6 +2048,8 @@ int usb_gadget_unregister_driver (struct usb_gadget_driver *driver)
 	stop_activity (dev, driver);
 	spin_unlock_irqrestore (&dev->lock, flags);
 
+	net2280_pullup (&dev->gadget, 0);
+
 	driver->unbind (&dev->gadget);
 	dev->gadget.dev.driver = NULL;
 	dev->driver = NULL;
@@ -2552,8 +2555,6 @@ static void handle_stat1_irqs (struct net2280 *dev, u32 stat)
 		if (stat & (1 << SUSPEND_REQUEST_INTERRUPT)) {
 			if (dev->driver->suspend)
 				dev->driver->suspend (&dev->gadget);
-			/* we use SUSPEND_IMMEDIATELY */
-			stat &= ~(1 << SUSPEND_REQUEST_INTERRUPT);
 		} else {
 			if (dev->driver->resume)
 				dev->driver->resume (&dev->gadget);

drivers/usb/host/ehci-hcd.c

@@ -695,9 +695,18 @@ static void ehci_work (struct ehci_hcd *ehci, struct pt_regs *regs)
 	timer_action_done (ehci, TIMER_IO_WATCHDOG);
 	if (ehci->reclaim_ready)
 		end_unlink_async (ehci, regs);
+
+	/* another CPU may drop ehci->lock during a schedule scan while
+	 * it reports urb completions.  this flag guards against bogus
+	 * attempts at re-entrant schedule scanning.
+	 */
+	if (ehci->scanning)
+		return;
+	ehci->scanning = 1;
 	scan_async (ehci, regs);
 	if (ehci->next_uframe != -1)
 		scan_periodic (ehci, regs);
+	ehci->scanning = 0;
 
 	/* the IO watchdog guards against hardware or driver bugs that
 	 * misplace IRQs, and should let us run completely without IRQs.

drivers/usb/host/ehci.h

@@ -53,6 +53,7 @@ struct ehci_hcd {			/* one per controller */
 	struct ehci_qh		*async;
 	struct ehci_qh		*reclaim;
 	unsigned		reclaim_ready : 1;
+	unsigned		scanning : 1;
 
 	/* periodic schedule support */
 #define	DEFAULT_I_TDPS		1024		/* some HCs can do less */

drivers/usb/input/hid-core.c

@@ -1859,8 +1859,8 @@ static int __init hid_init(void)
 
 static void __exit hid_exit(void)
 {
-	hiddev_exit();
 	usb_deregister(&hid_driver);
+	hiddev_exit();
 }
 
 module_init(hid_init);

drivers/usb/media/konicawc.c

@@ -362,8 +362,8 @@ static void konicawc_isoc_irq(struct urb *urb, struct pt_regs *regs)
 		else if (!urb->status && !cam->last_data_urb->status)
 			len = konicawc_compress_iso(uvd, cam->last_data_urb, urb);
 
-		resubmit_urb(uvd, urb);
 		resubmit_urb(uvd, cam->last_data_urb);
+		resubmit_urb(uvd, urb);
 		cam->last_data_urb = NULL;
 		uvd->stats.urb_length = len;
 		uvd->stats.data_count += len;

drivers/usb/serial/digi_acceleport.c

@@ -1546,6 +1546,10 @@ static void digi_close( struct usb_serial_port *port, struct file *filp )
 dbg( "digi_close: TOP: port=%d, open_count=%d", priv->dp_port_num, port->open_count );
 
 
+	/* if disconnected, just clear flags */
+	if (!usb_get_intfdata(port->serial->interface))
+		goto exit;
+
 	/* do cleanup only after final close on this port */
 	spin_lock_irqsave( &priv->dp_port_lock, flags );
 	priv->dp_in_close = 1;
@@ -1616,6 +1620,7 @@ dbg( "digi_close: TOP: port=%d, open_count=%d", priv->dp_port_num, port->open_co
 
 	tty->closing = 0;
 
+exit:
 	spin_lock_irqsave( &priv->dp_port_lock, flags );
 	priv->dp_write_urb_in_use = 0;
 	priv->dp_in_close = 0;