Skip to content

L
linux
Commit b868f1d5 authored by Matthew Wilcox's avatar Matthew Wilcox Committed by Christoph Hellwig
Browse files
Options

Unification of the SCSI Kconfig menus 

 - Make some more options depend on bus types
 - Eliminate the Kconfig option for 53c7,8xx and some references to it
 - Eliminate the original sym53c8xx driver from the config (leave it in the
   makefile for now though)
 - Merge the m68k Kconfig bits into the main scsi Kconfig file
 - Tidy up some formatting
parent bc1f1afe
Show whitespace changes
Inline Side-by-side
Showing with 200 additions and 1390 deletions
arch/m68k/Kconfig
View file @ b868f1d5
......@@ -731,417 +731,7 @@ config SCSI
module if your root file system (the one containing the directory /)
is located on a SCSI device.
comment "SCSI support type (disk, tape, CD-ROM)"
depends on SCSI
config BLK_DEV_SD
tristate "SCSI disk support"
depends on SCSI
---help---
If you want to use a SCSI hard disk or the SCSI or parallel port
version of the IOMEGA ZIP drive under Linux, say Y and read the
SCSI-HOWTO, the Disk-HOWTO and the Multi-Disk-HOWTO, available from
<http://www.tldp.org/docs.html#howto>. This is NOT for SCSI
CD-ROMs.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called sd_mod. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt> and
<file:Documentation/scsi/scsi.txt>. Do not compile this driver as a
module if your root file system (the one containing the directory /)
is located on a SCSI disk. In this case, do not compile the driver
for your SCSI host adapter (below) as a module either.
config SD_EXTRA_DEVS
int "Maximum number of SCSI disks that can be loaded as modules"
depends on BLK_DEV_SD
default "40"
---help---
This controls the amount of additional space allocated in tables for
drivers that are loaded as modules after the kernel is booted. In
the event that the SCSI core itself was loaded as a module, this
value is the number of additional disks that can be loaded after the
first host driver is loaded.
Admittedly this isn't pretty, but there are tons of race conditions
involved with resizing the internal arrays on the fly. Someday this
flag will go away, and everything will work automatically.
If you don't understand what's going on, go with the default.
config CHR_DEV_ST
tristate "SCSI tape support"
depends on SCSI
---help---
If you want to use a SCSI tape drive under Linux, say Y and read the
SCSI-HOWTO, available from
<http://www.tldp.org/docs.html#howto>, and
<file:Documentation/scsi/st.txt> in the kernel source. This is NOT for
SCSI CD-ROMs.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called st. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt> and
<file:Documentation/scsi/scsi.txt>.
config ST_EXTRA_DEVS
int "Maximum number of SCSI tapes that can be loaded as modules"
depends on CHR_DEV_ST
default "2"
---help---
This controls the amount of additional space allocated in tables for
drivers that are loaded as modules after the kernel is booted. In
the event that the SCSI core itself was loaded as a module, this
value is the number of additional tapes that can be loaded after the
first host driver is loaded.
Admittedly this isn't pretty, but there are tons of race conditions
involved with resizing the internal arrays on the fly. Someday this
flag will go away, and everything will work automatically.
If you don't understand what's going on, go with the default.
config BLK_DEV_SR
tristate "SCSI CDROM support"
depends on SCSI
---help---
If you want to use a SCSI CD-ROM under Linux, say Y and read the
SCSI-HOWTO and the CD-ROM-HOWTO at
<http://www.tldp.org/docs.html#howto>. Also make sure to say Y
or M to "ISO 9660 CD-ROM file system support" later.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called sr_mod. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt> and
<file:Documentation/scsi/scsi.txt>.
config BLK_DEV_SR_VENDOR
bool "Enable vendor-specific extensions (for SCSI CDROM)"
depends on BLK_DEV_SR
help
This enables the usage of vendor specific SCSI commands. This is
required to support multisession CDs with old NEC/TOSHIBA cdrom
drives (and HP Writers). If you have such a drive and get the first
session only, try saying Y here; everybody else says N.
config SR_EXTRA_DEVS
int "Maximum number of CDROM devices that can be loaded as modules"
depends on BLK_DEV_SR
default "2"
---help---
This controls the amount of additional space allocated in tables for
drivers that are loaded as modules after the kernel is booted. In
the event that the SCSI core itself was loaded as a module, this
value is the number of additional CD-ROMs that can be loaded after
the first host driver is loaded.
Admittedly this isn't pretty, but there are tons of race conditions
involved with resizing the internal arrays on the fly. Someday this
flag will go away, and everything will work automatically.
If you don't understand what's going on, go with the default.
config CHR_DEV_SG
tristate "SCSI generic support"
depends on SCSI
---help---
If you want to use SCSI scanners, synthesizers or CD-writers or just
about anything having "SCSI" in its name other than hard disks,
CD-ROMs or tapes, say Y here. These won't be supported by the kernel
directly, so you need some additional software which knows how to
talk to these devices using the SCSI protocol:
For scanners, look at SANE (<http://www.mostang.com/sane/>). For CD
writer software look at Cdrtools
(<http://www.fokus.gmd.de/research/cc/glone/employees/joerg.schilling/private/cdrecord.html>)
and for burning a "disk at once": CDRDAO
(<http://cdrdao.sourceforge.net/>). Cdparanoia is a high
quality digital reader of audio CDs (<http://www.xiph.org/paranoia/>).
For other devices, it's possible that you'll have to write the
driver software yourself. Please read the file
<file:Documentation/scsi/scsi-generic.txt> for more information.
If you want to compile this as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt> and
<file:Documentation/scsi/scsi.txt>. The module will be called sg.
If unsure, say N.
comment "Some SCSI devices (e.g. CD jukebox) support multiple LUNs"
depends on SCSI
config SCSI_MULTI_LUN
bool "Probe all LUNs on each SCSI device"
depends on SCSI
help
If you have a SCSI device that supports more than one LUN (Logical
Unit Number), e.g. a CD jukebox, and only one LUN is detected, you
can say Y here to force the SCSI driver to probe for multiple LUNs.
A SCSI device with multiple LUNs acts logically like multiple SCSI
devices. The vast majority of SCSI devices have only one LUN, and
so most people can say N here and should in fact do so, because it
is safer.
config SCSI_CONSTANTS
bool "Verbose SCSI error reporting (kernel size +=12K)"
depends on SCSI
help
The error messages regarding your SCSI hardware will be easier to
understand if you say Y here; it will enlarge your kernel by about
12 KB. If in doubt, say Y.
config SCSI_LOGGING
bool "SCSI logging facility"
depends on SCSI
---help---
This turns on a logging facility that can be used to debug a number
of SCSI related problems.
If you say Y here, no logging output will appear by default, but you
can enable logging by saying Y to "/proc file system support" and
"Sysctl support" below and executing the command
echo "scsi log token [level]" > /proc/scsi/scsi
at boot time after the /proc file system has been mounted.
There are a number of things that can be used for 'token' (you can
find them in the source: <file:drivers/scsi/scsi.c>), and this
allows you to select the types of information you want, and the
level allows you to select the level of verbosity.
If you say N here, it may be harder to track down some types of SCSI
problems. If you say Y here your kernel will be somewhat larger, but
there should be no noticeable performance impact as long as you have
logging turned off.
menu "SCSI low-level drivers"
depends on SCSI!=n
config A3000_SCSI
tristate "A3000 WD33C93A support"
depends on AMIGA && SCSI
help
If you have an Amiga 3000 and have SCSI devices connected to the
built-in SCSI controller, say Y. Otherwise, say N. This driver is
also available as a module ( = code which can be inserted in and
removed from the running kernel whenever you want). The module is
called wd33c93. If you want to compile it as a module, say M here
and read <file:Documentation/modules.txt>.
config A4000T_SCSI
bool "A4000T SCSI support (EXPERIMENTAL)"
depends on AMIGA && EXPERIMENTAL
help
Support for the NCR53C710 SCSI controller on the Amiga 4000T.
config A2091_SCSI
tristate "A2091 WD33C93A support"
depends on ZORRO && SCSI
help
If you have a Commodore A2091 SCSI controller, say Y. Otherwise,
say N. This driver is also available as a module ( = code which can
be inserted in and removed from the running kernel whenever you
want). The module is called wd33c93. If you want to compile it as
a module, say M here and read <file:Documentation/modules.txt>.
config GVP11_SCSI
tristate "GVP Series II WD33C93A support"
depends on ZORRO && SCSI
---help---
If you have a Great Valley Products Series II SCSI controller,
answer Y. Also say Y if you have a later model of GVP SCSI
controller (such as the GVP A4008 or a Combo board). Otherwise,
answer N. This driver does NOT work for the T-Rex series of
accelerators from TekMagic and GVP-M.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you
want). The module will be called gvp11. If you want to compile it
as a module, say M here and read <file:Documentation/modules.txt>.
config CYBERSTORM_SCSI
tristate "CyberStorm SCSI support"
depends on ZORRO && SCSI
help
If you have an Amiga with an original (MkI) Phase5 Cyberstorm
accelerator board and the optional Cyberstorm SCSI controller,
answer Y. Otherwise, say N.
config CYBERSTORMII_SCSI
tristate "CyberStorm Mk II SCSI support"
depends on ZORRO && SCSI
help
If you have an Amiga with a Phase5 Cyberstorm MkII accelerator board
and the optional Cyberstorm SCSI controller, say Y. Otherwise,
answer N.
config BLZ2060_SCSI
tristate "Blizzard 2060 SCSI support"
depends on ZORRO && SCSI
help
If you have an Amiga with a Phase5 Blizzard 2060 accelerator board
and want to use the onboard SCSI controller, say Y. Otherwise,
answer N.
config BLZ1230_SCSI
tristate "Blizzard 1230IV/1260 SCSI support"
depends on ZORRO && SCSI
help
If you have an Amiga 1200 with a Phase5 Blizzard 1230IV or Blizzard
1260 accelerator, and the optional SCSI module, say Y. Otherwise,
say N.
config FASTLANE_SCSI
tristate "Fastlane SCSI support"
depends on ZORRO && SCSI
help
If you have the Phase5 Fastlane Z3 SCSI controller, or plan to use
one in the near future, say Y to this question. Otherwise, say N.
config A4091_SCSI
bool "A4091 SCSI support (EXPERIMENTAL)"
depends on ZORRO && EXPERIMENTAL
help
Support for the NCR53C710 chip on the Amiga 4091 Z3 SCSI2 controller
(1993). Very obscure -- the 4091 was part of an Amiga 4000 upgrade
plan at the time the Amiga business was sold to DKB.
config WARPENGINE_SCSI
bool "WarpEngine SCSI support (EXPERIMENTAL)"
depends on ZORRO && EXPERIMENTAL
help
Support for MacroSystem Development's WarpEngine Amiga SCSI-2
controller. Info at
<http://www.lysator.liu.se/amiga/ar/guide/ar310.guide?FEATURE5>.
config BLZ603EPLUS_SCSI
bool "Blizzard PowerUP 603e+ SCSI (EXPERIMENTAL)"
depends on ZORRO && EXPERIMENTAL
help
If you have an Amiga 1200 with a Phase5 Blizzard PowerUP 603e+
accelerator, say Y. Otherwise, say N.
config OKTAGON_SCSI
tristate "BSC Oktagon SCSI support (EXPERIMENTAL)"
depends on ZORRO && EXPERIMENTAL && SCSI
help
If you have the BSC Oktagon SCSI disk controller for the Amiga, say
Y to this question. If you're in doubt about whether you have one,
see the picture at
<http://amiga.multigraph.com/photos/oktagon.html>.
# bool 'Cyberstorm Mk III SCSI support (EXPERIMENTAL)' CONFIG_CYBERSTORMIII_SCSI
# bool 'GVP Turbo 040/060 SCSI support (EXPERIMENTAL)' CONFIG_GVP_TURBO_SCSI
config ATARI_SCSI
tristate "Atari native SCSI support"
depends on ATARI && SCSI
---help---
If you have an Atari with built-in NCR5380 SCSI controller (TT,
Falcon, ...) say Y to get it supported. Of course also, if you have
a compatible SCSI controller (e.g. for Medusa). This driver is also
available as a module ( = code which can be inserted in and removed
from the running kernel whenever you want). The module is called
atari_scsi. If you want to compile it as a module, say M here and
read <file:Documentation/modules.txt>. This driver supports both
styles of NCR integration into the system: the TT style (separate
DMA), and the Falcon style (via ST-DMA, replacing ACSI). It does
NOT support other schemes, like in the Hades (without DMA).
config ATARI_SCSI_TOSHIBA_DELAY
bool "Long delays for Toshiba CD-ROMs"
depends on ATARI_SCSI
help
This option increases the delay after a SCSI arbitration to
accommodate some flaky Toshiba CD-ROM drives. Say Y if you intend to
use a Toshiba CD-ROM drive; otherwise, the option is not needed and
would impact performance a bit, so say N.
config ATARI_SCSI_RESET_BOOT
bool "Reset SCSI-devices at boottime"
depends on ATARI_SCSI
help
Reset the devices on your Atari whenever it boots. This makes the
boot process fractionally longer but may assist recovery from errors
that leave the devices with SCSI operations partway completed.
config TT_DMA_EMUL
bool "Hades SCSI DMA emulator"
depends on ATARI_SCSI && HADES
help
This option enables code which emulates the TT SCSI DMA chip on the
Hades. This increases the SCSI transfer rates at least ten times
compared to PIO transfers.
config MAC_SCSI
bool "Macintosh NCR5380 SCSI"
depends on MAC
help
This is the NCR 5380 SCSI controller included on most of the 68030
based Macintoshes. If you have one of these say Y and read the
SCSI-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
config SCSI_MAC_ESP
tristate "Macintosh NCR53c9[46] SCSI"
depends on MAC && SCSI
help
This is the NCR 53c9x SCSI controller found on most of the 68040
based Macintoshes. If you have one of these say Y and read the
SCSI-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called mac_esp. If you want to compile it as
a module, say M here and read <file:Documentation/modules.txt>.
# dep_tristate 'SCSI debugging host adapter' CONFIG_SCSI_DEBUG $CONFIG_SCSI
config MVME147_SCSI
bool "WD33C93 SCSI driver for MVME147"
depends on MVME147
help
Support for the on-board SCSI controller on the Motorola MVME147
single-board computer.
config MVME16x_SCSI
bool "NCR53C710 SCSI driver for MVME16x"
depends on MVME16x
help
The Motorola MVME162, 166, 167, 172 and 177 boards use the NCR53C710
SCSI controller chip. Almost everyone using one of these boards
will want to say Y to this question.
config BVME6000_SCSI
bool "NCR53C710 SCSI driver for BVME6000"
depends on BVME6000
help
The BVME4000 and BVME6000 boards from BVM Ltd use the NCR53C710
SCSI controller chip. Almost everyone using one of these boards
will want to say Y to this question.
config SUN3_SCSI
tristate "Sun3 NCR5380 SCSI"
depends on SUN3 && SCSI
help
This option will enable support for the OBIO (onboard io) NCR5380
SCSI controller found in the Sun 3/50 and 3/60, as well as for
"Sun3" type VME scsi controllers also based on the NCR5380.
General Linux information on the Sun 3 series (now discontinued)
is at <http://www.angelfire.com/ca2/tech68k/sun3.html>.
config SUN3X_ESP
bool "Sun3x ESP SCSI"
depends on SUN3X
help
The ESP was an on-board SCSI controller used on Sun 3/80
machines. Say Y here to compile in support for it.
endmenu
source "drivers/scsi/Kconfig"
endmenu
......
arch/sparc/Kconfig
View file @ b868f1d5
......@@ -626,232 +626,7 @@ config SCSI
module if your root file system (the one containing the directory /)
is located on a SCSI device.
comment "SCSI support type (disk, tape, CDrom)"
depends on SCSI
config BLK_DEV_SD
tristate "SCSI disk support"
depends on SCSI
---help---
If you want to use a SCSI hard disk or the SCSI or parallel port
version of the IOMEGA ZIP drive under Linux, say Y and read the
SCSI-HOWTO, the Disk-HOWTO and the Multi-Disk-HOWTO, available from
<http://www.tldp.org/docs.html#howto>. This is NOT for SCSI
CD-ROMs.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called sd_mod. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt> and
<file:Documentation/scsi/scsi.txt>. Do not compile this driver as a
module if your root file system (the one containing the directory /)
is located on a SCSI disk. In this case, do not compile the driver
for your SCSI host adapter (below) as a module either.
config SD_EXTRA_DEVS
int "Maximum number of SCSI disks that can be loaded as modules"
depends on BLK_DEV_SD
default "40"
---help---
This controls the amount of additional space allocated in tables for
drivers that are loaded as modules after the kernel is booted. In
the event that the SCSI core itself was loaded as a module, this
value is the number of additional disks that can be loaded after the
first host driver is loaded.
Admittedly this isn't pretty, but there are tons of race conditions
involved with resizing the internal arrays on the fly. Someday this
flag will go away, and everything will work automatically.
If you don't understand what's going on, go with the default.
config CHR_DEV_ST
tristate "SCSI tape support"
depends on SCSI
---help---
If you want to use a SCSI tape drive under Linux, say Y and read the
SCSI-HOWTO, available from
<http://www.tldp.org/docs.html#howto>, and
<file:Documentation/scsi/st.txt> in the kernel source. This is NOT
for SCSI CD-ROMs.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called st. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt> and
<file:Documentation/scsi/scsi.txt>.
config CHR_DEV_OSST
tristate "SCSI OnStream SC-x0 tape support"
depends on SCSI
---help---
The OnStream SC-x0 SCSI tape drives can not be driven by the
standard st driver, but instead need this special osst driver and
use the /dev/osstX char device nodes (major 206). Via usb-storage
and ide-scsi, you may be able to drive the USB-x0 and DI-x0 drives
as well. Note that there is also a second generation of OnStream
tape drives (ADR-x0) that supports the standard SCSI-2 commands for
tapes (QIC-157) and can be driven by the standard driver st.
For more information, you may have a look at the SCSI-HOWTO
<http://www.tldp.org/docs.html#howto> and
<file:Documentation/scsi/osst.txt> in the kernel source.
More info on the OnStream driver may be found on
<http://linux1.onstream.nl/test/>
Please also have a look at the standard st docu, as most of it
applies to osst as well.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called osst. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt> and
<file:Documentation/scsi/scsi.txt>.
config BLK_DEV_SR
tristate "SCSI CDROM support"
depends on SCSI
---help---
If you want to use a SCSI CD-ROM under Linux, say Y and read the
SCSI-HOWTO and the CD-ROM-HOWTO at
<http://www.tldp.org/docs.html#howto>. Also make sure to say Y
or M to "ISO 9660 CD-ROM file system support" later.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called sr_mod. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt> and
<file:Documentation/scsi/scsi.txt>.
config BLK_DEV_SR_VENDOR
bool "Enable vendor-specific extensions (for SCSI CDROM)"
depends on BLK_DEV_SR
help
This enables the usage of vendor specific SCSI commands. This is
required to support multisession CDs with old NEC/TOSHIBA cdrom
drives (and HP Writers). If you have such a drive and get the first
session only, try saying Y here; everybody else says N.
config SR_EXTRA_DEVS
int "Maximum number of CDROM devices that can be loaded as modules"
depends on BLK_DEV_SR
default "2"
---help---
This controls the amount of additional space allocated in tables for
drivers that are loaded as modules after the kernel is booted. In
the event that the SCSI core itself was loaded as a module, this
value is the number of additional CD-ROMs that can be loaded after
the first host driver is loaded.
Admittedly this isn't pretty, but there are tons of race conditions
involved with resizing the internal arrays on the fly. Someday this
flag will go away, and everything will work automatically.
If you don't understand what's going on, go with the default.
config CHR_DEV_SG
tristate "SCSI generic support"
depends on SCSI
---help---
If you want to use SCSI scanners, synthesizers or CD-writers or just
about anything having "SCSI" in its name other than hard disks,
CD-ROMs or tapes, say Y here. These won't be supported by the kernel
directly, so you need some additional software which knows how to
talk to these devices using the SCSI protocol:
For scanners, look at SANE (<http://www.mostang.com/sane/>). For CD
writer software look at Cdrtools
(<http://www.fokus.gmd.de/research/cc/glone/employees/joerg.schilling/private/cdrecord.html>)
and for burning a "disk at once": CDRDAO
(<http://cdrdao.sourceforge.net/>). Cdparanoia is a high
quality digital reader of audio CDs (<http://www.xiph.org/paranoia/>).
For other devices, it's possible that you'll have to write the
driver software yourself. Please read the file
<file:Documentation/scsi/scsi-generic.txt> for more information.
If you want to compile this as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt> and
<file:Documentation/scsi/scsi.txt>. The module will be called sg.
If unsure, say N.
comment "Some SCSI devices (e.g. CD jukebox) support multiple LUNs"
depends on SCSI
config SCSI_MULTI_LUN
bool "Probe all LUNs on each SCSI device"
depends on SCSI
help
If you have a SCSI device that supports more than one LUN (Logical
Unit Number), e.g. a CD jukebox, and only one LUN is detected, you
can say Y here to force the SCSI driver to probe for multiple LUNs.
A SCSI device with multiple LUNs acts logically like multiple SCSI
devices. The vast majority of SCSI devices have only one LUN, and
so most people can say N here and should in fact do so, because it
is safer.
config SCSI_CONSTANTS
bool "Verbose SCSI error reporting (kernel size +=12K)"
depends on SCSI
help
The error messages regarding your SCSI hardware will be easier to
understand if you say Y here; it will enlarge your kernel by about
12 KB. If in doubt, say Y.
config SCSI_LOGGING
bool "SCSI logging facility"
depends on SCSI
---help---
This turns on a logging facility that can be used to debug a number
of SCSI related problems.
If you say Y here, no logging output will appear by default, but you
can enable logging by saying Y to "/proc file system support" and
"Sysctl support" below and executing the command
echo "scsi log token [level]" > /proc/scsi/scsi
at boot time after the /proc file system has been mounted.
There are a number of things that can be used for 'token' (you can
find them in the source: <file:drivers/scsi/scsi.c>), and this
allows you to select the types of information you want, and the
level allows you to select the level of verbosity.
If you say N here, it may be harder to track down some types of SCSI
problems. If you say Y here your kernel will be somewhat larger, but
there should be no noticeable performance impact as long as you have
logging turned off.
menu "SCSI low-level drivers"
depends on SCSI!=n
config SCSI_SUNESP
tristate "Sparc ESP Scsi Driver"
depends on SCSI
help
This is the driver for the Sun ESP SCSI host adapter. The ESP
chipset is present in most SPARC SBUS-based computers.
This support is also available as a module called esp ( = code
which can be inserted in and removed from the running kernel
whenever you want). If you want to compile it as a module, say M
here and read <file:Documentation/modules.txt>.
config SCSI_QLOGICPTI
tristate "PTI Qlogic,ISP Driver"
depends on SCSI
help
This driver supports SBUS SCSI controllers from PTI or QLogic. These
controllers are known under Solaris as qpti and in the openprom as
PTI,ptisp or QLGC,isp. Note that PCI QLogic SCSI controllers are
driven by a different driver.
This support is also available as a module called qlogicpti ( =
code which can be inserted in and removed from the running kernel
whenever you want). If you want to compile it as a module, say M
here and read <file:Documentation/modules.txt>.
endmenu
source "drivers/scsi/Kconfig"
endmenu
......
arch/sparc64/Kconfig
View file @ b868f1d5
......@@ -794,642 +794,7 @@ config SCSI
module if your root file system (the one containing the directory /)
is located on a SCSI device.
comment "SCSI support type (disk, tape, CDrom)"
depends on SCSI
config BLK_DEV_SD
tristate "SCSI disk support"
depends on SCSI
---help---
If you want to use a SCSI hard disk or the SCSI or parallel port
version of the IOMEGA ZIP drive under Linux, say Y and read the
SCSI-HOWTO, the Disk-HOWTO and the Multi-Disk-HOWTO, available from
<http://www.tldp.org/docs.html#howto>. This is NOT for SCSI
CD-ROMs.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called sd_mod. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt> and
<file:Documentation/scsi/scsi.txt>. Do not compile this driver as a
module if your root file system (the one containing the directory /)
is located on a SCSI disk. In this case, do not compile the driver
for your SCSI host adapter (below) as a module either.
config SD_EXTRA_DEVS
int "Maximum number of SCSI disks that can be loaded as modules"
depends on BLK_DEV_SD
default "40"
---help---
This controls the amount of additional space allocated in tables for
drivers that are loaded as modules after the kernel is booted. In
the event that the SCSI core itself was loaded as a module, this
value is the number of additional disks that can be loaded after the
first host driver is loaded.
Admittedly this isn't pretty, but there are tons of race conditions
involved with resizing the internal arrays on the fly. Someday this
flag will go away, and everything will work automatically.
If you don't understand what's going on, go with the default.
config CHR_DEV_ST
tristate "SCSI tape support"
depends on SCSI
---help---
If you want to use a SCSI tape drive under Linux, say Y and read the
SCSI-HOWTO, available from
<http://www.tldp.org/docs.html#howto>, and
<file:Documentation/scsi/st.txt> in the kernel source. This is NOT
for SCSI CD-ROMs.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called st. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt> and
<file:Documentation/scsi/scsi.txt>.
config CHR_DEV_OSST
tristate "SCSI OnStream SC-x0 tape support"
depends on SCSI
---help---
The OnStream SC-x0 SCSI tape drives can not be driven by the
standard st driver, but instead need this special osst driver and
use the /dev/osstX char device nodes (major 206). Via usb-storage
and ide-scsi, you may be able to drive the USB-x0 and DI-x0 drives
as well. Note that there is also a second generation of OnStream
tape drives (ADR-x0) that supports the standard SCSI-2 commands for
tapes (QIC-157) and can be driven by the standard driver st.
For more information, you may have a look at the SCSI-HOWTO
<http://www.tldp.org/docs.html#howto> and
<file:Documentation/scsi/osst.txt> in the kernel source.
More info on the OnStream driver may be found on
<http://linux1.onstream.nl/test/>
Please also have a look at the standard st docu, as most of it
applies to osst as well.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called osst. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt> and
<file:Documentation/scsi/scsi.txt>.
config BLK_DEV_SR
tristate "SCSI CDROM support"
depends on SCSI
---help---
If you want to use a SCSI CD-ROM under Linux, say Y and read the
SCSI-HOWTO and the CD-ROM-HOWTO at
<http://www.tldp.org/docs.html#howto>. Also make sure to say Y
or M to "ISO 9660 CD-ROM file system support" later.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called sr_mod. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt> and
<file:Documentation/scsi/scsi.txt>.
config BLK_DEV_SR_VENDOR
bool "Enable vendor-specific extensions (for SCSI CDROM)"
depends on BLK_DEV_SR
help
This enables the usage of vendor specific SCSI commands. This is
required to support multisession CDs with old NEC/TOSHIBA cdrom
drives (and HP Writers). If you have such a drive and get the first
session only, try saying Y here; everybody else says N.
config SR_EXTRA_DEVS
int "Maximum number of CDROM devices that can be loaded as modules"
depends on BLK_DEV_SR
default "2"
---help---
This controls the amount of additional space allocated in tables for
drivers that are loaded as modules after the kernel is booted. In
the event that the SCSI core itself was loaded as a module, this
value is the number of additional CD-ROMs that can be loaded after
the first host driver is loaded.
Admittedly this isn't pretty, but there are tons of race conditions
involved with resizing the internal arrays on the fly. Someday this
flag will go away, and everything will work automatically.
If you don't understand what's going on, go with the default.
config CHR_DEV_SG
tristate "SCSI generic support"
depends on SCSI
---help---
If you want to use SCSI scanners, synthesizers or CD-writers or just
about anything having "SCSI" in its name other than hard disks,
CD-ROMs or tapes, say Y here. These won't be supported by the kernel
directly, so you need some additional software which knows how to
talk to these devices using the SCSI protocol:
For scanners, look at SANE (<http://www.mostang.com/sane/>). For CD
writer software look at Cdrtools
(<http://www.fokus.gmd.de/research/cc/glone/employees/joerg.schilling/private/cdrecord.html>)
and for burning a "disk at once": CDRDAO
(<http://cdrdao.sourceforge.net/>). Cdparanoia is a high
quality digital reader of audio CDs (<http://www.xiph.org/paranoia/>).
For other devices, it's possible that you'll have to write the
driver software yourself. Please read the file
<file:Documentation/scsi/scsi-generic.txt> for more information.
If you want to compile this as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt> and
<file:Documentation/scsi/scsi.txt>. The module will be called sg.
If unsure, say N.
comment "Some SCSI devices (e.g. CD jukebox) support multiple LUNs"
depends on SCSI
config SCSI_MULTI_LUN
bool "Probe all LUNs on each SCSI device"
depends on SCSI
help
If you have a SCSI device that supports more than one LUN (Logical
Unit Number), e.g. a CD jukebox, and only one LUN is detected, you
can say Y here to force the SCSI driver to probe for multiple LUNs.
A SCSI device with multiple LUNs acts logically like multiple SCSI
devices. The vast majority of SCSI devices have only one LUN, and
so most people can say N here and should in fact do so, because it
is safer.
config SCSI_CONSTANTS
bool "Verbose SCSI error reporting (kernel size +=12K)"
depends on SCSI
help
The error messages regarding your SCSI hardware will be easier to
understand if you say Y here; it will enlarge your kernel by about
12 KB. If in doubt, say Y.
config SCSI_LOGGING
bool "SCSI logging facility"
depends on SCSI
---help---
This turns on a logging facility that can be used to debug a number
of SCSI related problems.
If you say Y here, no logging output will appear by default, but you
can enable logging by saying Y to "/proc file system support" and
"Sysctl support" below and executing the command
echo "scsi log token [level]" > /proc/scsi/scsi
at boot time after the /proc file system has been mounted.
There are a number of things that can be used for 'token' (you can
find them in the source: <file:drivers/scsi/scsi.c>), and this
allows you to select the types of information you want, and the
level allows you to select the level of verbosity.
If you say N here, it may be harder to track down some types of SCSI
problems. If you say Y here your kernel will be somewhat larger, but
there should be no noticeable performance impact as long as you have
logging turned off.
menu "SCSI low-level drivers"
depends on SCSI!=n
config SCSI_SUNESP
tristate "Sparc ESP Scsi Driver"
depends on SCSI
help
This is the driver for the Sun ESP SCSI host adapter. The ESP
chipset is present in most SPARC SBUS-based computers.
This support is also available as a module called esp ( = code
which can be inserted in and removed from the running kernel
whenever you want). If you want to compile it as a module, say M
here and read <file:Documentation/modules.txt>.
config SCSI_QLOGICPTI
tristate "PTI Qlogic, ISP Driver"
depends on SCSI
help
This driver supports SBUS SCSI controllers from PTI or QLogic. These
controllers are known under Solaris as qpti and in the openprom as
PTI,ptisp or QLGC,isp. Note that PCI QLogic SCSI controllers are
driven by a different driver.
This support is also available as a module called qlogicpti ( =
code which can be inserted in and removed from the running kernel
whenever you want). If you want to compile it as a module, say M
here and read <file:Documentation/modules.txt>.
choice
prompt "Adaptec AIC7xxx support"
optional
depends on SCSI && PCI
source "drivers/scsi/aic7xxx/Kconfig.aic7xxx"
config SCSI_AIC7XXX_OLD
tristate "Old driver"
---help---
WARNING This driver is an older aic7xxx driver and is no longer
under active development. Adaptec, Inc. is writing a new driver to
take the place of this one, and it is recommended that whenever
possible, people should use the new Adaptec written driver instead
of this one. This driver will eventually be phased out entirely.
This is support for the various aic7xxx based Adaptec SCSI
controllers. These include the 274x EISA cards; 284x VLB cards;
2902, 2910, 293x, 294x, 394x, 3985 and several other PCI and
motherboard based SCSI controllers from Adaptec. It does not support
the AAA-13x RAID controllers from Adaptec, nor will it likely ever
support them. It does not support the 2920 cards from Adaptec that
use the Future Domain SCSI controller chip. For those cards, you
need the "Future Domain 16xx SCSI support" driver.
In general, if the controller is based on an Adaptec SCSI controller
chip from the aic777x series or the aic78xx series, this driver
should work. The only exception is the 7810 which is specifically
not supported (that's the RAID controller chip on the AAA-13x
cards).
Note that the AHA2920 SCSI host adapter is *not* supported by this
driver; choose "Future Domain 16xx SCSI support" instead if you have
one of those.
Information on the configuration options for this controller can be
found by checking the help file for each of the available
configuration options. You should read
<file:Documentation/scsi/aic7xxx_old.txt> at a minimum before
contacting the maintainer with any questions. The SCSI-HOWTO,
available from <http://www.tldp.org/docs.html#howto>, can also
be of great help.
If you want to compile this driver as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt>. The module
will be called aic7xxx_old.
config AIC7XXX_OLD_TCQ_ON_BY_DEFAULT
bool "Enable Tagged Command Queueing (TCQ) by default"
depends on SCSI_AIC7XXX_OLD
---help---
This option causes the aic7xxx driver to attempt to use Tagged
Command Queueing (TCQ) on all devices that claim to support it.
TCQ is a feature of SCSI-2 which improves performance: the host
adapter can send several SCSI commands to a device's queue even if
previous commands haven't finished yet. Because the device is
intelligent, it can optimize its operations (like head positioning)
based on its own request queue. Not all devices implement this
correctly.
If you say Y here, you can still turn off TCQ on troublesome devices
with the use of the tag_info boot parameter. See the file
<file:Documentation/scsi/aic7xxx.txt> for more information on that and
other aic7xxx setup commands. If this option is turned off, you may
still enable TCQ on known good devices by use of the tag_info boot
parameter.
If you are unsure about your devices then it is safest to say N
here.
However, TCQ can increase performance on some hard drives by as much
as 50% or more, so it is recommended that if you say N here, you
should at least read the <file:Documentation/scsi/aic7xxx.txt> file so
you will know how to enable this option manually should your drives
prove to be safe in regards to TCQ.
Conversely, certain drives are known to lock up or cause bus resets
when TCQ is enabled on them. If you have a Western Digital
Enterprise SCSI drive for instance, then don't even bother to enable
TCQ on it as the drive will become unreliable, and it will actually
reduce performance.
config AIC7XXX_OLD_CMDS_PER_DEVICE
int "Maximum number of TCQ commands per device"
depends on SCSI_AIC7XXX_OLD
default "8"
---help---
Specify the number of commands you would like to allocate per SCSI
device when Tagged Command Queueing (TCQ) is enabled on that device.
Reasonable figures are in the range of 8 to 24 commands per device,
but depending on hardware could be increased or decreased from that
figure. If the number is too high for any particular device, the
driver will automatically compensate usually after only 10 minutes
of uptime. It will not hinder performance if some of your devices
eventually have their command depth reduced, but is a waste of
memory if all of your devices end up reducing this number down to a
more reasonable figure.
NOTE: Certain very broken drives are known to lock up when given
more commands than they like to deal with. Quantum Fireball drives
are the most common in this category. For the Quantum Fireball
drives it is suggested to use no more than 8 commands per device.
Default: 8
config AIC7XXX_OLD_PROC_STATS
bool "Collect statistics to report in /proc"
depends on SCSI_AIC7XXX_OLD
---help---
This option tells the driver to keep track of how many commands have
been sent to each particular device and report that information to
the user via the /proc/scsi/aic7xxx/n file, where n is the number of
the aic7xxx controller you want the information on. This adds a
small amount of overhead to each and every SCSI command the aic7xxx
driver handles, so if you aren't really interested in this
information, it is best to leave it disabled. This will only work if
you also say Y to "/proc file system support", below.
If unsure, say N.
endchoice
config SCSI_SYM53C8XX_2
tristate "SYM53C8XX Version 2 SCSI support"
depends on PCI && SCSI
---help---
This driver supports the whole NCR53C8XX/SYM53C8XX family of
PCI-SCSI controllers. It also supports the subset of LSI53C10XX
Ultra-160 controllers that are based on the SYM53C8XX SCRIPTS
language. It does not support LSI53C10XX Ultra-320 PCI-X SCSI
controllers.
If your system has problems using this new major version of the
SYM53C8XX driver, you may switch back to driver version 1.
Please read <file:drivers/scsi/sym53c8xx_2/Documentation.txt> for more
information.
config SCSI_SYM53C8XX_DMA_ADDRESSING_MODE
int "DMA addressing mode"
depends on SCSI_SYM53C8XX_2
default "1"
---help---
This option only applies to PCI-SCSI chip that are PCI DAC capable
(875A, 895A, 896, 1010-33, 1010-66, 1000).
When set to 0, only PCI 32 bit DMA addressing (SAC) will be performed.
When set to 1, 40 bit DMA addressing (with upper 24 bits of address
set to zero) is supported. The addressable range is here 1 TB.
When set to 2, full 64 bits of address for DMA are supported, but only
16 segments of 4 GB can be addressed. The addressable range is so
limited to 64 GB.
The safest value is 0 (32 bit DMA addressing) that is guessed to still
fit most of real machines.
The preferred value 1 (40 bit DMA addressing) should make happy
properly engineered PCI DAC capable host bridges. You may configure
this option for Intel platforms with more than 4 GB of memory.
The still experimental value 2 (64 bit DMA addressing with 16 x 4GB
segments limitation) can be used on systems that require PCI address
bits past bit 39 to be set for the addressing of memory using PCI
DAC cycles.
config SCSI_SYM53C8XX_DEFAULT_TAGS
int "default tagged command queue depth"
depends on SCSI_SYM53C8XX_2
default "16"
help
This is the default value of the command queue depth the driver will
announce to the generic SCSI layer for devices that support tagged
command queueing. This value can be changed from the boot command line.
This is a soft limit that cannot exceed CONFIG_SCSI_SYM53C8XX_MAX_TAGS.
config SCSI_SYM53C8XX_MAX_TAGS
int "maximum number of queued commands"
depends on SCSI_SYM53C8XX_2
default "64"
help
This option allows you to specify the maximum number of commands
that can be queued to any device, when tagged command queuing is
possible. The driver supports up to 256 queued commands per device.
This value is used as a compiled-in hard limit.
config SCSI_SYM53C8XX_IOMAPPED
bool "use normal IO"
depends on SCSI_SYM53C8XX_2
help
If you say Y here, the driver will preferently use normal IO rather than
memory mapped IO.
config SCSI_NCR53C8XX
tristate "NCR53C8XX SCSI support"
depends on PCI && SCSI_SYM53C8XX_2!=y && SCSI
---help---
This is the BSD ncr driver adapted to Linux for the NCR53C8XX family
of PCI-SCSI controllers. This driver supports parity checking,
tagged command queuing and fast synchronous data transfers up to 80
MB/s with wide FAST-40 LVD devices and controllers.
Recent versions of the 53C8XX chips are better supported by the
option "SYM53C8XX SCSI support", below.
Note: there is yet another driver for the 53c8xx family of
controllers ("NCR53c7,8xx SCSI support" above). If you want to use
them both, you need to say M to both and build them as modules, but
only one may be active at a time. If you have a 53c8xx board, you
probably do not want to use the "NCR53c7,8xx SCSI support".
Please read <file:Documentation/scsi/ncr53c8xx.txt> for more
information.
config SCSI_SYM53C8XX
tristate "SYM53C8XX SCSI support"
depends on PCI && SCSI_SYM53C8XX_2!=y && SCSI
---help---
This driver supports all the features of recent 53C8XX chips (used
in PCI SCSI controllers), notably the hardware phase mismatch
feature of the SYM53C896.
Older versions of the 53C8XX chips are not supported by this
driver. If your system uses either a 810 rev. < 16, a 815, or a 825
rev. < 16 PCI SCSI processor, you must use the generic NCR53C8XX
driver ("NCR53C8XX SCSI support" above) or configure both the
NCR53C8XX and this SYM53C8XX drivers either as module or linked to
the kernel image.
When both drivers are linked into the kernel, the SYM53C8XX driver
is called first at initialization and you can use the 'excl=ioaddr'
driver boot option to exclude attachment of adapters by the
SYM53C8XX driver. For example, entering
'sym53c8xx=excl:0xb400,excl=0xc000' at the lilo prompt prevents
adapters at io address 0xb400 and 0xc000 from being attached by the
SYM53C8XX driver, thus allowing the NCR53C8XX driver to attach them.
The 'excl' option is also supported by the NCR53C8XX driver.
Please read <file:Documentation/scsi/ncr53c8xx.txt> for more
information.
config SCSI_NCR53C8XX_DEFAULT_TAGS
int "default tagged command queue depth"
depends on PCI && SCSI_SYM53C8XX_2!=y && (SCSI_NCR53C8XX || SCSI_SYM53C8XX)
default "8"
---help---
"Tagged command queuing" is a feature of SCSI-2 which improves
performance: the host adapter can send several SCSI commands to a
device's queue even if previous commands haven't finished yet.
Because the device is intelligent, it can optimize its operations
(like head positioning) based on its own request queue. Some SCSI
devices don't implement this properly; if you want to disable this
feature, enter 0 or 1 here (it doesn't matter which).
The default value is 8 and should be supported by most hard disks.
This value can be overridden from the boot command line using the
'tags' option as follows (example):
'ncr53c8xx=tags:4/t2t3q16/t0u2q10' will set default queue depth to
4, set queue depth to 16 for target 2 and target 3 on controller 0
and set queue depth to 10 for target 0 / lun 2 on controller 1.
The normal answer therefore is to go with the default 8 and to use
a boot command line option for devices that need to use a different
command queue depth.
There is no safe option other than using good SCSI devices.
config SCSI_NCR53C8XX_MAX_TAGS
int "maximum number of queued commands"
depends on PCI && SCSI_SYM53C8XX_2!=y && (SCSI_NCR53C8XX || SCSI_SYM53C8XX)
default "32"
---help---
This option allows you to specify the maximum number of commands
that can be queued to any device, when tagged command queuing is
possible. The default value is 32. Minimum is 2, maximum is 64.
Modern hard disks are able to support 64 tags and even more, but
do not seem to be faster when more than 32 tags are being used.
So, the normal answer here is to go with the default value 32 unless
you are using very large hard disks with large cache (>= 1 MB) that
are able to take advantage of more than 32 tagged commands.
There is no safe option and the default answer is recommended.
config SCSI_NCR53C8XX_SYNC
int "synchronous transfers frequency in MHz"
depends on PCI && SCSI_SYM53C8XX_2!=y && (SCSI_NCR53C8XX || SCSI_SYM53C8XX)
default "10"
---help---
The SCSI Parallel Interface-2 Standard defines 5 classes of transfer
rates: FAST-5, FAST-10, FAST-20, FAST-40 and FAST-80. The numbers
are respectively the maximum data transfer rates in mega-transfers
per second for each class. For example, a FAST-20 Wide 16 device is
able to transfer data at 20 million 16 bit packets per second for a
total rate of 40 MB/s.
You may specify 0 if you want to only use asynchronous data
transfers. This is the safest and slowest option. Otherwise, specify
a value between 5 and 80, depending on the capability of your SCSI
controller. The higher the number, the faster the data transfer.
Note that 80 should normally be ok since the driver decreases the
value automatically according to the controller's capabilities.
Your answer to this question is ignored for controllers with NVRAM,
since the driver will get this information from the user set-up. It
also can be overridden using a boot setup option, as follows
(example): 'ncr53c8xx=sync:12' will allow the driver to negotiate
for FAST-20 synchronous data transfer (20 mega-transfers per
second).
The normal answer therefore is not to go with the default but to
select the maximum value 80 allowing the driver to use the maximum
value supported by each controller. If this causes problems with
your SCSI devices, you should come back and decrease the value.
There is no safe option other than using good cabling, right
terminations and SCSI conformant devices.
config SCSI_NCR53C8XX_PROFILE
bool "enable profiling"
depends on PCI && SCSI_SYM53C8XX_2!=y && (SCSI_NCR53C8XX || SCSI_SYM53C8XX)
help
This option allows you to enable profiling information gathering.
These statistics are not very accurate due to the low frequency
of the kernel clock (100 Hz on i386) and have performance impact
on systems that use very fast devices.
The normal answer therefore is N.
config SCSI_NCR53C8XX_PQS_PDS
bool "include support for the NCR PQS/PDS SCSI card"
depends on (SCSI_NCR53C8XX || SCSI_SYM53C8XX) && SCSI_SYM53C8XX
help
Say Y here if you have a special SCSI adapter produced by NCR
corporation called a PCI Quad SCSI or PCI Dual SCSI. You do not need
this if you do not have one of these adapters. However, since this
device is detected as a specific PCI device, this option is quite
safe.
The common answer here is N, but answering Y is safe.
config SCSI_NCR53C8XX_NO_DISCONNECT
bool "not allow targets to disconnect"
depends on PCI && SCSI_SYM53C8XX_2!=y && (SCSI_NCR53C8XX || SCSI_SYM53C8XX) && SCSI_NCR53C8XX_DEFAULT_TAGS=0
help
This option is only provided for safety if you suspect some SCSI
device of yours to not support properly the target-disconnect
feature. In that case, you would say Y here. In general however, to
not allow targets to disconnect is not reasonable if there is more
than 1 device on a SCSI bus. The normal answer therefore is N.
config SCSI_NCR53C8XX_SYMBIOS_COMPAT
bool "assume boards are SYMBIOS compatible (EXPERIMENTAL)"
depends on PCI && SCSI_SYM53C8XX_2!=y && (SCSI_NCR53C8XX || SCSI_SYM53C8XX) && EXPERIMENTAL
---help---
This option allows you to enable some features depending on GPIO
wiring. These General Purpose Input/Output pins can be used for
vendor specific features or implementation of the standard SYMBIOS
features. Genuine SYMBIOS controllers use GPIO0 in output for
controller LED and GPIO3 bit as a flag indicating
singled-ended/differential interface. The Tekram DC-390U/F boards
uses a different GPIO wiring.
Your answer to this question is ignored if all your controllers have
NVRAM, since the driver is able to detect the board type from the
NVRAM format.
If all the controllers in your system are genuine SYMBIOS boards or
use BIOS and drivers from SYMBIOS, you would want to say Y here,
otherwise N. N is the safe answer.
config SCSI_QLOGIC_ISP
tristate "Qlogic ISP SCSI support"
depends on PCI && SCSI
---help---
This driver works for all QLogic PCI SCSI host adapters (IQ-PCI,
IQ-PCI-10, IQ_PCI-D) except for the PCI-basic card. (This latter
card is supported by the "AM53/79C974 PCI SCSI" driver.)
If you say Y here, make sure to choose "BIOS" at the question "PCI
access mode".
Please read the file <file:Documentation/scsi/qlogicisp.txt>. You
should also read the SCSI-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called qlogicisp. If you want to compile it as
a module, say M here and read <file:Documentation/modules.txt>.
config SCSI_QLOGIC_FC
tristate "Qlogic ISP FC SCSI support"
depends on PCI && SCSI
help
This is a driver for the QLogic ISP2100 SCSI-FCP host adapter.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called qlogicfc. If you want to compile it as
a module, say M here and read <file:Documentation/modules.txt>.
config SCSI_QLOGIC_FC_FIRMWARE
bool
depends on SCSI_QLOGIC_FC
default y
endmenu
source "drivers/scsi/Kconfig"
endmenu
......
drivers/scsi/Kconfig
View file @ b868f1d5
......@@ -27,8 +27,8 @@ config CHR_DEV_ST
If you want to use a SCSI tape drive under Linux, say Y and read the
SCSI-HOWTO, available from
<http://www.tldp.org/docs.html#howto>, and
<file:Documentation/scsi/st.txt> in the kernel source. This is NOT for
SCSI CD-ROMs.
<file:Documentation/scsi/st.txt> in the kernel source. This is NOT
for SCSI CD-ROMs.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
......@@ -131,11 +131,11 @@ config SCSI_REPORT_LUNS
depends on SCSI
default y
help
If you want to build with SCSI REPORT LUNS support in the kernel, say Y here.
The REPORT LUNS command is useful for devices (such as disk arrays) with
large numbers of LUNs where the LUN values are not contiguous (sparse LUN).
REPORT LUNS scanning is done only for SCSI-3 devices. Most users can safely
answer N here.
If you want support for SCSI REPORT LUNS, say Y here.
The REPORT LUNS command is useful for devices (such as disk arrays)
with large numbers of LUNs where the LUN values are not contiguous
(sparse LUN). REPORT LUNS scanning is done only for SCSI-3 devices.
Most users can safely answer N here.
config SCSI_CONSTANTS
bool "Verbose SCSI error reporting (kernel size +=12K)"
......@@ -207,7 +207,7 @@ config BLK_DEV_3W_XXXX_RAID
config SCSI_7000FASST
tristate "7000FASST SCSI support"
depends on SCSI && ISA
depends on ISA && SCSI
help
This driver supports the Western Digital 7000 SCSI host adapter
family. Some information is in the source:
......@@ -220,7 +220,7 @@ config SCSI_7000FASST
config SCSI_ACARD
tristate "ACARD SCSI support"
depends on SCSI
depends on PCI && SCSI
help
This driver supports the ACARD 870U/W SCSI host adapter.
......@@ -285,6 +285,7 @@ source "drivers/scsi/aic7xxx/Kconfig.aic7xxx"
config SCSI_AIC7XXX_OLD
tristate "Adaptec AIC7xxx support (old driver)"
depends on SCSI
help
WARNING This driver is an older aic7xxx driver and is no longer
under active development. Adaptec, Inc. is writing a new driver to
......@@ -343,7 +344,7 @@ config SCSI_DPT_I2O
config SCSI_ADVANSYS
tristate "AdvanSys SCSI support"
depends on SCSI
depends on (ISA || EISA || PCI) && SCSI
help
This is a driver for all SCSI host adapters manufactured by
AdvanSys. It is documented in the kernel source in
......@@ -357,7 +358,7 @@ config SCSI_ADVANSYS
config SCSI_IN2000
tristate "Always IN2000 SCSI support"
depends on SCSI
depends on ISA && SCSI
help
This is support for an ISA bus SCSI host adapter. You'll find more
information in <file:Documentation/scsi/in2000.txt>. If it doesn't work
......@@ -369,10 +370,10 @@ config SCSI_IN2000
say M here and read <file:Documentation/modules.txt>. The module
will be called in2000.
# does not use pci dma and seems to be isa/onboard only for old machines
# does not use pci dma and seems to be onboard only for old machines
config SCSI_AM53C974
tristate "AM53/79C974 PCI SCSI support"
depends on !X86_64 && SCSI && PCI
depends on X86 && PCI && SCSI
---help---
This is support for the AM53/79C974 SCSI host adapters. Please read
<file:Documentation/scsi/AM53C974.txt> for details. Also, the
......@@ -390,7 +391,7 @@ config SCSI_AM53C974
config SCSI_MEGARAID
tristate "AMI MegaRAID support"
depends on SCSI
depends on PCI && SCSI
help
This driver supports the AMI MegaRAID 418, 428, 438, 466, 762, 490
and 467 SCSI host adapters.
......@@ -402,7 +403,7 @@ config SCSI_MEGARAID
config SCSI_BUSLOGIC
tristate "BusLogic SCSI support"
depends on SCSI
depends on (PCI || ISA) && SCSI
---help---
This is support for BusLogic MultiMaster and FlashPoint SCSI Host
Adapters. Consult the SCSI-HOWTO, available from
......@@ -436,7 +437,7 @@ config SCSI_CPQFCTS
config SCSI_DMX3191D
tristate "DMX3191D SCSI support"
depends on SCSI && PCI
depends on PCI && SCSI
help
This is support for Domex DMX3191D SCSI Host Adapters.
......@@ -447,7 +448,7 @@ config SCSI_DMX3191D
config SCSI_DTC3280
tristate "DTC3180/3280 SCSI support"
depends on SCSI && ISA
depends on ISA && SCSI
help
This is support for DTC 3180/3280 SCSI Host Adapters. Please read
the SCSI-HOWTO, available from
......@@ -461,7 +462,7 @@ config SCSI_DTC3280
config SCSI_EATA
tristate "EATA ISA/EISA/PCI (DPT and generic EATA/DMA-compliant boards) support"
depends on SCSI
depends on (ISA || EISA || PCI) && SCSI
---help---
This driver supports all EATA/DMA-compliant SCSI host adapters. DPT
ISA and all EISA I/O addresses are probed looking for the "EATA"
......@@ -527,7 +528,7 @@ config SCSI_EATA_PIO
config SCSI_FUTURE_DOMAIN
tristate "Future Domain 16xx SCSI/AHA-2920A support"
depends on SCSI
depends on (ISA || PCI) && SCSI
---help---
This is support for Future Domain's 16-bit SCSI host adapters
(TMC-1660/1680, TMC-1650/1670, TMC-3260, TMC-1610M/MER/MEX) and
......@@ -563,7 +564,7 @@ config SCSI_FD_MCS
config SCSI_GDTH
tristate "Intel/ICP (former GDT SCSI Disk Array) RAID Controller support"
depends on SCSI
depends on (ISA || EISA || PCI) && SCSI
---help---
Formerly called GDT SCSI Disk Array Controller Support.
......@@ -579,7 +580,7 @@ config SCSI_GDTH
config SCSI_GENERIC_NCR5380
tristate "Generic NCR5380/53c400 SCSI PIO support"
depends on SCSI
depends on ISA && SCSI
---help---
This is a driver for the old NCR 53c80 series of SCSI controllers
on boards using PIO. Most boards such as the Trantor T130 fit this
......@@ -600,7 +601,7 @@ config SCSI_GENERIC_NCR5380
config SCSI_GENERIC_NCR5380_MMIO
tristate "Generic NCR5380/53c400 SCSI MMIO support"
depends on SCSI
depends on ISA && SCSI
---help---
This is a driver for the old NCR 53c80 series of SCSI controllers
on boards using memory mapped I/O.
......@@ -609,10 +610,11 @@ config SCSI_GENERIC_NCR5380_MMIO
of the box, you may have to change some settings in
<file:drivers/scsi/g_NCR5380.h>.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called g_NCR5380. If you want to compile it as
a module, say M here and read <file:Documentation/modules.txt>.
This driver is also available as a module ( = code which can
be inserted in and removed from the running kernel whenever
you want). The module will be called g_NCR5380_mmio.
If you want to compile it as a module, say M here and read
<file:Documentation/modules.txt>.
config SCSI_GENERIC_NCR53C400
bool "Enable NCR53c400 extensions"
......@@ -699,7 +701,7 @@ config IBMMCA_SCSI_DEV_RESET
config SCSI_IPS
tristate "IBM ServeRAID support"
depends on X86 && SCSI && PCI
depends on X86 && PCI && SCSI
---help---
This is support for the IBM ServeRAID hardware RAID controllers.
See <http://www.developer.ibm.com/welcome/netfinity/serveraid.html>
......@@ -715,7 +717,7 @@ config SCSI_IPS
config SCSI_INITIO
tristate "Initio 9100U(W) support"
depends on SCSI && PCI
depends on PCI && SCSI
help
This is support for the Initio 91XXU(W) SCSI host adapter. Please
read the SCSI-HOWTO, available from
......@@ -728,7 +730,7 @@ config SCSI_INITIO
config SCSI_INIA100
tristate "Initio INI-A100U2W support"
depends on SCSI && PCI
depends on PCI && SCSI
help
This is support for the Initio INI-A100U2W SCSI host adapter.
Please read the SCSI-HOWTO, available from
......@@ -828,7 +830,7 @@ config SCSI_IZIP_SLOW_CTR
config SCSI_NCR53C406A
tristate "NCR53c406a SCSI support"
depends on SCSI && ISA
depends on ISA && SCSI
help
This is support for the NCR53c406a SCSI host adapter. For user
configurable parameters, check out <file:drivers/scsi/NCR53c406a.c>
......@@ -857,14 +859,12 @@ config 53C700_IO_MAPPED
default y
config SCSI_LASI700
tristate "HP LASI SCSI support for 53c700/710"
depends on PARISC && SCSI
tristate "HP Lasi SCSI support for 53c700/710"
depends on GSC && SCSI
help
This is a driver for the lasi baseboard in some parisc machines
which is based on the 53c700 chip. Will also support LASI subsystems
based on the 710 chip using 700 emulation mode.
Unless you know you have a 53c700 or 53c710 based lasi, say N here
This is a driver for the SCSI controller in the Lasi chip found in
many PA-RISC workstations & servers. If you do not know whether you
have a Lasi chip, it is safe to say "Y" here.
config 53C700_MEM_MAPPED
bool
......@@ -876,60 +876,6 @@ config 53C700_LE_ON_BE
depends on SCSI_LASI700
default y
config SCSI_NCR53C7xx
tristate "NCR53c7,8xx SCSI support"
depends on SCSI && PCI
---help---
This is a driver for the 53c7 and 8xx NCR family of SCSI
controllers, not to be confused with the NCR 5380 controllers. It
is explained in section 3.8 of the SCSI-HOWTO, available from
<http://www.tldp.org/docs.html#howto>. If it doesn't work out
of the box, you may have to change some settings in
<file:drivers/scsi/53c7,8xx.h>. Please read
<file:Documentation/scsi/ncr53c7xx.txt> for the available boot time
command line options.
Note: there is another driver for the 53c8xx family of controllers
("NCR53C8XX SCSI support" below). If you want to use them both, you
need to say M to both and build them as modules, but only one may be
active at a time. If you have a 53c8xx board, it's better to use the
other driver.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called 53c7,8xx. If you want to compile it as
a module, say M here and read <file:Documentation/modules.txt>.
config SCSI_NCR53C7xx_sync
bool "always negotiate synchronous transfers"
depends on SCSI_NCR53C7xx
help
In general, this is good; however, it is a bit dangerous since there
are some broken SCSI devices out there. Take your chances. Safe bet
is N.
config SCSI_NCR53C7xx_FAST
bool "allow FAST-SCSI [10MHz]"
depends on SCSI_NCR53C7xx
help
This will enable 10MHz FAST-SCSI transfers with your host
adapter. Some systems have problems with that speed, so it's safest
to say N here.
config SCSI_NCR53C7xx_DISCONNECT
bool "allow DISCONNECT"
depends on SCSI_NCR53C7xx
help
This enables the disconnect/reconnect feature of the NCR SCSI
controller. When you say Y here, a slow SCSI device will not lock
the SCSI bus while processing a request, allowing simultaneous use
of e.g. a SCSI hard disk and SCSI tape or CD-ROM drive, and
providing much better performance when using slow and fast SCSI
devices at the same time. Some devices, however, do not operate
properly with this option enabled, and will cause your SCSI system
to hang, which might cause a system crash. The safe answer
therefore is to say N.
config SCSI_SYM53C8XX_2
tristate "SYM53C8XX Version 2 SCSI support"
depends on PCI && SCSI
......@@ -938,10 +884,7 @@ config SCSI_SYM53C8XX_2
PCI-SCSI controllers. It also supports the subset of LSI53C10XX
Ultra-160 controllers that are based on the SYM53C8XX SCRIPTS
language. It does not support LSI53C10XX Ultra-320 PCI-X SCSI
controllers.
If your system has problems using this new major version of the
SYM53C8XX driver, you may switch back to driver version 1.
controllers; you need to use the Fusion MPT driver for that.
Please read <file:drivers/scsi/sym53c8xx_2/Documentation.txt> for more
information.
......@@ -1216,7 +1159,7 @@ config SCSI_MCA_53C9X
config SCSI_PAS16
tristate "PAS16 SCSI support"
depends on SCSI && ISA
depends on ISA && SCSI
---help---
This is support for a SCSI host adapter. It is explained in section
3.10 of the SCSI-HOWTO, available from
......@@ -1231,7 +1174,7 @@ config SCSI_PAS16
config SCSI_PCI2000
tristate "PCI2000 support"
depends on SCSI
depends on PCI && SCSI
help
This is support for the PCI2000I EIDE interface card which acts as a
SCSI host adapter. Please read the SCSI-HOWTO, available from
......@@ -1244,7 +1187,7 @@ config SCSI_PCI2000
config SCSI_PCI2220I
tristate "PCI2220i support"
depends on SCSI
depends on PCI && SCSI
help
This is support for the PCI2220i EIDE interface card which acts as a
SCSI host adapter. Please read the SCSI-HOWTO, available from
......@@ -1257,7 +1200,7 @@ config SCSI_PCI2220I
config SCSI_PSI240I
tristate "PSI240i support"
depends on SCSI && ISA
depends on ISA && SCSI
help
This is support for the PSI240i EIDE interface card which acts as a
SCSI host adapter. Please read the SCSI-HOWTO, available from
......@@ -1270,7 +1213,7 @@ config SCSI_PSI240I
config SCSI_QLOGIC_FAS
tristate "Qlogic FAS SCSI support"
depends on SCSI && ISA
depends on ISA && SCSI
---help---
This is a driver for the ISA, VLB, and PCMCIA versions of the Qlogic
FastSCSI! cards as well as any other card based on the FASXX chip
......@@ -1340,6 +1283,20 @@ config SCSI_QLOGIC_1280
The module will be called qla1280. If you want to compile it as
a module, say M here and read <file:Documentation/modules.txt>.
config SCSI_QLOGICPTI
tristate "PTI Qlogic, ISP Driver"
depends on SBUS && SCSI
help
This driver supports SBUS SCSI controllers from PTI or QLogic. These
controllers are known under Solaris as qpti and in the openprom as
PTI,ptisp or QLGC,isp. Note that PCI QLogic SCSI controllers are
driven by a different driver.
This support is also available as a module called qlogicpti ( =
code which can be inserted in and removed from the running kernel
whenever you want). If you want to compile it as a module, say M
here and read <file:Documentation/modules.txt>.
config SCSI_SEAGATE
tristate "Seagate ST-02 and Future Domain TMC-8xx SCSI support"
depends on X86 && ISA && SCSI
......@@ -1355,10 +1312,10 @@ config SCSI_SEAGATE
The module will be called seagate. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>.
# definitely looks note 64bit safe:
# definitely looks not 64bit safe:
config SCSI_SIM710
tristate "Simple 53c710 SCSI support (Compaq, NCR machines)"
depends on (EISA || MCA && !X86_64) && SCSI
depends on (EISA || MCA) && SCSI
---help---
This driver for NCR53c710 based SCSI host adapters.
......@@ -1371,7 +1328,7 @@ config 53C700_IO_MAPPED
config SCSI_SYM53C416
tristate "Symbios 53c416 SCSI support"
depends on SCSI && ISA
depends on ISA && SCSI
---help---
This is support for the sym53c416 SCSI host adapter, the SCSI
adapter that comes with some HP scanners. This driver requires that
......@@ -1392,7 +1349,7 @@ config SCSI_SYM53C416
config SCSI_DC395x
tristate "Tekram DC395(U/UW/F) and DC315(U) SCSI support (EXPERIMENTAL)"
depends on EXPERIMENTAL && PCI && SCSI
depends on PCI && SCSI && EXPERIMENTAL
---help---
This driver supports PCI SCSI host adapters based on the ASIC
TRM-S1040 chip, e.g Tekram DC395(U/UW/F) and DC315(U) variants.
......@@ -1446,7 +1403,7 @@ config SCSI_DC390T_NOGENSUPP
config SCSI_T128
tristate "Trantor T128/T128F/T228 SCSI support"
depends on SCSI && ISA
depends on ISA && SCSI
---help---
This is support for a SCSI host adapter. It is explained in section
3.11 of the SCSI-HOWTO, available from
......@@ -1463,7 +1420,7 @@ config SCSI_T128
config SCSI_U14_34F
tristate "UltraStor 14F/34F support"
depends on SCSI
depends on ISA && SCSI
---help---
This is support for the UltraStor 14F and 34F SCSI-2 host adapters.
The source at <file:drivers/scsi/u14-34f.c> contains some
......@@ -1533,7 +1490,7 @@ config SCSI_ULTRASTOR
config SCSI_NSP32
tristate "Workbit NinjaSCSI-32Bi/UDE support"
depends on SCSI
depends on PCI && SCSI
help
This is support for the Workbit NinjaSCSI-32Bi/UDE PCI/Cardbus
SCSI host adapter. Please read the SCSI-HOWTO, available from
......@@ -1606,7 +1563,7 @@ source "drivers/scsi/arm/Kconfig"
config JAZZ_ESP
bool "MIPS JAZZ FAS216 SCSI support"
depends on MIPS_JAZZ
depends on MIPS_JAZZ && SCSI
help
This is the driver for the onboard SCSI host adapter of MIPS Magnum
4000, Acer PICA, Olivetti M700-10 and a few other identical OEM
......@@ -1625,7 +1582,7 @@ config A3000_SCSI
config A4000T_SCSI
bool "A4000T SCSI support (EXPERIMENTAL)"
depends on AMIGA && EXPERIMENTAL
depends on AMIGA && SCSI && EXPERIMENTAL
help
Support for the NCR53C710 SCSI controller on the Amiga 4000T.
......@@ -1695,7 +1652,7 @@ config FASTLANE_SCSI
config A4091_SCSI
bool "A4091 SCSI support (EXPERIMENTAL)"
depends on ZORRO && EXPERIMENTAL
depends on ZORRO && SCSI && EXPERIMENTAL
help
Support for the NCR53C710 chip on the Amiga 4091 Z3 SCSI2 controller
(1993). Very obscure -- the 4091 was part of an Amiga 4000 upgrade
......@@ -1703,7 +1660,7 @@ config A4091_SCSI
config WARPENGINE_SCSI
bool "WarpEngine SCSI support (EXPERIMENTAL)"
depends on ZORRO && EXPERIMENTAL
depends on ZORRO && SCSI && EXPERIMENTAL
help
Support for MacroSystem Development's WarpEngine Amiga SCSI-2
controller. Info at
......@@ -1711,20 +1668,143 @@ config WARPENGINE_SCSI
config BLZ603EPLUS_SCSI
bool "Blizzard PowerUP 603e+ SCSI (EXPERIMENTAL)"
depends on ZORRO && EXPERIMENTAL
depends on ZORRO && SCSI && EXPERIMENTAL
help
If you have an Amiga 1200 with a Phase5 Blizzard PowerUP 603e+
accelerator, say Y. Otherwise, say N.
config OKTAGON_SCSI
tristate "BSC Oktagon SCSI support (EXPERIMENTAL)"
depends on ZORRO && EXPERIMENTAL && SCSI
depends on ZORRO && SCSI && EXPERIMENTAL
help
If you have the BSC Oktagon SCSI disk controller for the Amiga, say
Y to this question. If you're in doubt about whether you have one,
see the picture at
<http://amiga.multigraph.com/photos/oktagon.html>.
config ATARI_SCSI
tristate "Atari native SCSI support"
depends on ATARI && SCSI
---help---
If you have an Atari with built-in NCR5380 SCSI controller (TT,
Falcon, ...) say Y to get it supported. Of course also, if you have
a compatible SCSI controller (e.g. for Medusa). This driver is also
available as a module ( = code which can be inserted in and removed
from the running kernel whenever you want). The module is called
atari_scsi. If you want to compile it as a module, say M here and
read <file:Documentation/modules.txt>. This driver supports both
styles of NCR integration into the system: the TT style (separate
DMA), and the Falcon style (via ST-DMA, replacing ACSI). It does
NOT support other schemes, like in the Hades (without DMA).
config ATARI_SCSI_TOSHIBA_DELAY
bool "Long delays for Toshiba CD-ROMs"
depends on ATARI_SCSI
help
This option increases the delay after a SCSI arbitration to
accommodate some flaky Toshiba CD-ROM drives. Say Y if you intend to
use a Toshiba CD-ROM drive; otherwise, the option is not needed and
would impact performance a bit, so say N.
config ATARI_SCSI_RESET_BOOT
bool "Reset SCSI-devices at boottime"
depends on ATARI_SCSI
help
Reset the devices on your Atari whenever it boots. This makes the
boot process fractionally longer but may assist recovery from errors
that leave the devices with SCSI operations partway completed.
config TT_DMA_EMUL
bool "Hades SCSI DMA emulator"
depends on ATARI_SCSI && HADES
help
This option enables code which emulates the TT SCSI DMA chip on the
Hades. This increases the SCSI transfer rates at least ten times
compared to PIO transfers.
config MAC_SCSI
bool "Macintosh NCR5380 SCSI"
depends on MAC && SCSI
help
This is the NCR 5380 SCSI controller included on most of the 68030
based Macintoshes. If you have one of these say Y and read the
SCSI-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
config SCSI_MAC_ESP
tristate "Macintosh NCR53c9[46] SCSI"
depends on MAC && SCSI
help
This is the NCR 53c9x SCSI controller found on most of the 68040
based Macintoshes. If you have one of these say Y and read the
SCSI-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called mac_esp. If you want to compile it as
a module, say M here and read <file:Documentation/modules.txt>.
config MVME147_SCSI
bool "WD33C93 SCSI driver for MVME147"
depends on MVME147 && SCSI
help
Support for the on-board SCSI controller on the Motorola MVME147
single-board computer.
config MVME16x_SCSI
bool "NCR53C710 SCSI driver for MVME16x"
depends on MVME16x && SCSI
help
The Motorola MVME162, 166, 167, 172 and 177 boards use the NCR53C710
SCSI controller chip. Almost everyone using one of these boards
will want to say Y to this question.
config BVME6000_SCSI
bool "NCR53C710 SCSI driver for BVME6000"
depends on BVME6000 && SCSI
help
The BVME4000 and BVME6000 boards from BVM Ltd use the NCR53C710
SCSI controller chip. Almost everyone using one of these boards
will want to say Y to this question.
config SCSI_NCR53C7xx_FAST
bool "allow FAST-SCSI [10MHz]"
depends on A4000T_SCSI || A4091_SCSI || BLZ603EPLUS_SCSI || WARPENGINE_SCSI || MVME16x_SCSI || BVME6000_SCSI
help
This will enable 10MHz FAST-SCSI transfers with your host
adapter. Some systems have problems with that speed, so it's safest
to say N here.
config SUN3_SCSI
tristate "Sun3 NCR5380 SCSI"
depends on SUN3 && SCSI
help
This option will enable support for the OBIO (onboard io) NCR5380
SCSI controller found in the Sun 3/50 and 3/60, as well as for
"Sun3" type VME scsi controllers also based on the NCR5380.
General Linux information on the Sun 3 series (now discontinued)
is at <http://www.angelfire.com/ca2/tech68k/sun3.html>.
config SUN3X_ESP
bool "Sun3x ESP SCSI"
depends on SUN3X && SCSI
help
The ESP was an on-board SCSI controller used on Sun 3/80
machines. Say Y here to compile in support for it.
config SCSI_SUNESP
tristate "Sparc ESP Scsi Driver"
depends on SBUS && SCSI
help
This is the driver for the Sun ESP SCSI host adapter. The ESP
chipset is present in most SPARC SBUS-based computers.
This support is also available as a module called esp ( = code
which can be inserted in and removed from the running kernel
whenever you want). If you want to compile it as a module, say M
here and read <file:Documentation/modules.txt>.
config SCSI_PC980155
tristate "NEC PC-9801-55 SCSI support"
depends on X86_PC9800 && SCSI
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7